Summary and the Detail Report

Hi All,
I want to create a summary and detail report in two different layouts on one single report,based the input summary or the detail report shoud execute...,how to do the same.
Thanks in advance
C.Somasundaram

Hi,
bring your two different layouts in seperate frames and write format triggers on this frames to show or suppress them (depending on your input). Connect the two frames with an collabsing anchor.
Regards
Rainer

Similar Messages

  • Project Summary and Base Calendar Reports Error Message when Saving to Desktop from Server

    We have a user that gets the following popup when she attempts to save file from the Server to her desktop:
     "The Project Summary and Base Calendar reports cannot be opened, renamed, or deleted".  The popup includes a red circle with a white "X" and an "OK" button.  The OK button must be clicked 27 times
    before the file will eventually save to the desktop.
    I have been able to replicate this error when I try to save her file to my desktop, as well.
    I can see from the Organizer that the Project Summary and Base Calendar reports are part of the Global, but not part of the file-specific reports while on the Server.  This is true for other schedules in our enterprise, so I am not sure why this is
    occurring.  After performing the save and clicking "OK" 27 times, there is exactly 27 reports listed for this file in the Organizer, but the Project Summary and Base Calendar reports are the only two that did not transfer with the file.
    What is going on here and why is it happening for just this file?  It feels like we are getting into a contention issue between the local Global.MPT and the Enterprise Global.
    We are on Project Server v2010 SP2.

    Thanks for your feedback Chris!
    When you open the organizer, check that you don't have for the project in question any enterprise object on the project side.
    Have you installed the
    latest PS2010 CU? A more radical way for reparing a file is to export it as an XML file and save/publish it back on Project Server as an MPP file. But the project UID will change thus it will cause trouble
    in case you have timesheets. You could also try to delete the project and restore it (assuming you have the daily backup in place).
    Hope this helps,
    Guillaume Rouyre, MBA, MCP, MCTS |

  • Why does it stop every few seconds for "buffering" when I try to watch the Daily Show and the Colbert Report?!

    The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

    The past couple of weeks whenever I try to watch the Daily Show and the Colbert Report the screen freezes up every 2 or 3 seconds and the message "buffering" comes on. VERY FRUSTRATING!!!

  • Unable to open the detail report in the same page/window

    When i use the "Navigate to Web Page" action link to navigate to the detail report, the detail report is opening in new window. Is there any way that the detail report can be opened in the same page/window.

    Hi,
    why don't you use the master/detail table option when dragging the master VO ?
    Frank

  • Firefox crashes when opening and the crash report I get is Firefox 3.6.3 Crash Report [@ strlen | nspr4.dll@0x15f9f ].

    == Issue
    ==
    Firefox is crashing or closing unexpectedly
    == Description
    ==
    Firefox 3.6.3 crashes when opening and the Crash Report [[@ strlen nspr4.dll@0x15f9f ]. It was working perfectly fine and the last three days, I am having difficulty in opening firefox. It crashes with the above crash report every time I open. I came across the bad image error and did a clean reinstall multiple times and that did not help. I have firebug and firecookies as an addon.
    == Crash ID(s)
    ==
    bp-5972b384-791f-4667-b3cb-051812100504
    == Firefox version
    ==
    3.6
    == Operating system
    ==
    windows XP
    == User Agent
    ==
    Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5
    == Plugins installed
    ==
    firebug and firecookie

    Usually doesn't immediately crash, although that happens also. Usually hangs, then crashes.
    Addons are WHY I use Firefox when it works. I am NOT on the bleeding edge any longer. I could go back to boring, boring, Chrome.

  • How to create a simple input form in BPC 10.0 and the details are below

    Hi Experts,
    I would like to know how to create attached input form and what are the dimension would require to use in order to populate correct report
    Please provide your comments and the sample report has been attached.
    MGA Index
    Column
    Head Count Planning Required
    Approver authority
    Asset
    Row_Cost Center
    Business Development
    Finance
    Procurement -
      C&P
    Legal
    HSS &  Environment
    Petroleum Engg
    Drilling
    Subsurface
    Thanks in advance.
    Regards,
    SK.

    Hello,
    The new update of Muse allows you to use the Webforms widget with a non Business Catalyst host as well.
    However, Captcha is something which currently cannot be used via Muse without using Business Catalyst as host.
    This document might be of some help : http://forums.adobe.com/docs/DOC-3581
    Regards,
    Sachin

  • Hello friends, my itunes has stopped working. and the problem report stated the following: Fault Module Name:     KERNELBASE.dll   Fault Module Version:     6.1.7601.17514.................. please can anybody help me?hello friends, my itunes has stopped w

    Hello everybody> my itunes has stopped working and the problem report stated the following:
    Problem signature:
      Problem Event Name:    APPCRASH
      Application Name:    iTunes.exe
      Application Version:    10.5.3.3
      Application Timestamp:    4f14cc3d
      Fault Module Name:    KERNELBASE.dll
      Fault Module Version:    6.1.7601.17514
      Fault Module Timestamp:    4ce7b8f0
      Exception Code:    80000003
      Exception Offset:    0003381b
      OS Version:    6.1.7601.2.1.0.256.1
      Locale ID:    1033
      Additional Information 1:    0a9e
      Additional Information 2:    0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:    0a9e
      Additional Information 4:    0a9e372d3b4ad19135b953a78882e789
    can anybody help me?

    Are you seeing a similar message when launching QuickTime Player?
    What security software is installed on the computer? Have you tried testing in an admin account or after uninstalling tthe security software?
    Use one of the following articles to guide you through removing iTunes and the related QuickTime files.
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7

  • I am using firefox ver 8.0.1 and Canon LBP3200 printer. Whenever i give a print command from Firefox the browser crashes and the crash reporter asks for submitting the report.

    I am using the printer in a network. the same problem is faced when giving print on the canon LBP3200 from the local computer.
    its kind of very irritating.
    Even if i open a pdf document in the browser and then give print command the browser crashes and the crash reporter appears.
    Kindly help.

    Sir
    Following are the crash reports generated:
    bp-8af5ab44-6b84-427f-ae16-36acd2111227 12/27/201102:29 PM
    bp-bc804648-bbb4-4ac1-a93a-604052111219 12/19/201104:00 PM
    bp-1fb97a23-84cc-4922-91d0-21a732111219 12/19/201104:00 PM
    bp-c621113c-5446-4c16-8236-5a06c2111214 12/15/201101:07 PM
    bp-2f51489c-adcf-4f9e-8f16-f6cf52111212 12/12/201102:24 PM
    bp-5b9f3af7-d1e2-4882-b625-815cb2111212 12/12/201102:23 PM
    bp-0b7389bc-7047-478c-a01c-03f3b2111212 12/12/201102:22 PM

  • Firefox crashed when I restarted it to install plugins and the crash reporter is unable to submit a report for this crash. How can I submit this report?

    # This file is in the UTF-8 encoding
    [Strings]
    # LOCALIZATION NOTE (isRTL):
    # Leave this entry empty unless your language requires right-to-left layout,
    # for example like Arabic, Hebrew, Persian. If your language needs RTL, please
    # use the untranslated English word "yes" as value
    isRTL=
    CrashReporterTitle=Crash Reporter
    # LOCALIZATION NOTE (CrashReporterVendorTitle): %s is replaced with the vendor name. (i.e. "Mozilla")
    CrashReporterVendorTitle=%s Crash Reporter
    # LOCALIZATION NOTE (CrashReporterErrorText): %s is replaced with another string containing detailed information.
    CrashReporterErrorText=The application had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a report for this crash.\n\nDetails: %s
    # LOCALIZATION NOTE (CrashReporterProductErrorText2): The first %s is replaced with the product name (i.e. "Firefox"), the second is replaced with another string containing detailed information. These two substitutions can not be reordered!
    CrashReporterProductErrorText2=%s had a problem and crashed.\n\nUnfortunately the crash reporter is unable to submit a crash report.\n\nDetails: %s
    CrashReporterSorry=We're Sorry
    # LOCALIZATION NOTE (CrashReporterDescriptionText2): The %s is replaced with the product name.
    CrashReporterDescriptionText2=%s had a problem and crashed.\n\nTo help us diagnose and fix the problem, you can send us a crash report.
    CrashReporterDefault=This application is run after a crash to report the problem to the application vendor. It should not be run directly.
    Details=Details…
    ViewReportTitle=Report Contents
    CommentGrayText=Add a comment (comments are publicly visible)
    ExtraReportInfo=This report also contains technical information about the state of the application when it crashed.
    # LOCALIZATION NOTE (CheckSendReport): The %s is replaced with the vendor name.
    CheckSendReport=Tell %s about this crash so they can fix it
    CheckIncludeURL=Include the address of the page I was on
    CheckSendEmail=Email me when more information is available
    EmailGrayText=Enter your email address here
    ReportPreSubmit2=Your crash report will be submitted before you quit or restart.
    ReportDuringSubmit2=Submitting your report…
    ReportSubmitSuccess=Report submitted successfully!
    ReportSubmitFailed=There was a problem submitting your report.
    ReportResubmit=Resending reports that previously failed to send…
    # LOCALIZATION NOTE (Quit2): The %s is replaced with the product name.
    Quit2=Quit %s
    # LOCALIZATION NOTE (Restart): The %s is replaced with the product name.
    Restart=Restart %s
    Ok=OK
    Close=Close
    # LOCALIZATION NOTE (CrashID): The %s is replaced with the Crash ID from the server, which is a string like abc12345-6789-0abc-def1-23456abcdef1
    CrashID=Crash ID: %s
    # LOCALIZATION NOTE (CrashDetailsURL): The %s is replaced with a URL that the user can visit to view the crash details.
    CrashDetailsURL=You can view details of this crash at %s
    ErrorBadArguments=The application passed an invalid argument.
    ErrorExtraFileExists=The application didn't leave an application data file.
    ErrorExtraFileRead=Couldn't read the application data file.
    ErrorExtraFileMove=Couldn't move application data file.
    ErrorDumpFileExists=The application did not leave a crash dump file.
    ErrorDumpFileMove=Couldn't move crash dump.
    ErrorNoProductName=The application did not identify itself.
    ErrorNoServerURL=The application did not specify a crash reporting server.
    ErrorNoSettingsPath=Couldn't find the crash reporter's settings.
    ErrorCreateDumpDir=Couldn't create pending dump directory.
    # LOCALIZATION NOTE (ErrorEndOfLife): The %s is replaced with the product name.
    ErrorEndOfLife=The version of %s you are using is no longer supported. Crash reports are no longer being accepted for this version. Please consider upgrading to a supported version.

    I think you may have pasted the wrong thing into the Description.
    To try and resubmit a pending report (for example if you lost your internet connection):
    #Go to about:crashes in the location bar
    #Click the latest report link to resubmit it
    If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report.

  • Tables in SD and the details

    Hi guys,
    I need your assistance to know the Table names and the corresponding keys for the following fields.
    We want to develop a report  that has the following fields(ABC) .
    The report needs the following details in an Inquiry(A) ,if a Quotation exist for the same  need the following Quotation detail(B) ,if Sales order Exist for the Quotation(C) ,need the Following Sales Doc. details.
    A.Inquiry details .Fileds needed
    1. Inquiry Date
    2.created by
    3.closing date/Due date
    4.Estimated Value
    5.Customer
    6.Material.
    B.Quotation.
    1.Quotation date
    2.Quotation Amount
    3.Created by
    4.Reason for Rejection/Status fo Quotation
    C.Sales Document
    1.Sales Order On.
    2.Amount.
    3.Status.
    4.good delivered date
    Regards.

    hi
    A.Inquiry details .Fileds needed
    1. Inquiry Date
    2.created by
    3.closing date/Due date
    4.Estimated Value
    5.Customer
    6.Material.
    B.Quotation.
    1.Quotation date
    2.Quotation Amount
    3.Created by
    4.Reason for Rejection/Status fo Quotation
    All ABove you can get in VBAP table
    C.Sales Document
    1.Sales Order On. - VBAK
    2.Amount. - VBAK / VBAP
    3.Status. What status you are looking for?
    4.good delivered date - VBEP

  • Problem in filtering the detailed report

    Hello All,
        I am having scenario  where i need to jump from xcelsius to BW web report for details and i want this web report to be filtered by  plant value .I have created the flash variable i have referenced the input value to the palnt cell in dashboard excel sheet. when i  run the dashboard  i am getting filtered out put in dashboard but   in the detail web report i am getting all values and filter has no effect.
    can anybody please help me regarding this?
    Thank You very much

    If you create a multiprovider with the two ODS you won’t have this problem.
    Hope it helps.
    Regards.

  • Firefox is crashing when I load above a certain number of tabs, and the crash reporter is failing to report it. At certain times I can't distinguish, this results in a BSOD too.

    I keep restarting a session on my other firefox profile, because it includes posts I haven't finished writing or want to post, but after an indeterminate time firefox either:
    # Hangs intermittently (3 minute-ish hangs with 30 second unhangs) and gets shut down by windows.
    # Shuts itself and brings up a crash reporter, which then fails to send the information.
    # Causes blue screen of death.
    My suspicion is that the failure is caused by memory issues, as I can run this one no prob. Particularly, perhaps unwisely, I didn't stop opening new pages when it started crashing, and that seemed to cause it to crash faster.

    I think you may have pasted the wrong thing into the Description.
    To try and resubmit a pending report (for example if you lost your internet connection):
    #Go to about:crashes in the location bar
    #Click the latest report link to resubmit it
    If there isn't a pending crash report listed, I'm afraid you may be out of luck for that crash report.

  • Difference between standard report S_ALR_87011963 and the custom report

    Hi Friends,
    My client requires a report which displays the acquisition and depreciation values of assets. Actually the requirement is to display all the values except planned depreciation.
    Therefore we are taking the values only from the table ANLP. However the values in this report is not matching with that of the standard. In the standard report the Current Book Value should be selected to avoid planned depreciation. Am i right??
    So once the CBV is checked the standard report will display only the posted values for a period.
    But we are getting a huge difference in the depreciation value between the two reports.
    Please help me out on this.
    Regards,
    Prasad

    I think your client requires to see Gross asset value and Deon posted in the report for all the years (not for current year only).  If that is the case, current book value = APC - Depn posted earlier, so it gives wrong result.
    Ex  : Asset acquired in 2006 ; APC = 1000$ ; Depn posted in 2006 : 100$, so current book value is 900$.
    So, I would suggest to have a look at the logical data base ADA or use ANLC, ANLV, ANLQ, etc or ANL* and search for the relavant tables required for your purpose.
    regards
    S

  • Just updated to LR5.4 on my mac and the Detail Panel in the Develop module is missing. How to fix?

    How do you fix the missing Detail panel in the Develop module? I just updated on the Mac to LR 5.4.

    Right-click on any RH panel header in Develop and put a check mark next to the Detail panel

  • Firefox crashes and the crash reporter appears in my screen

    Hello,
    Crash reporter appears when I am trying to open the browser. I click on Mozilla's shortcut but no website opens..just the crash reporter appears the following message:
    "Firefox had a problem and crashed. We'll try to restore your tabs and windows when it restarts."
    It happened after I downloaded and installed some exe. files like live.ID etc.(It's for watching football games just with network access). After that I restored twice my computer at earlier time periods when firefox worked perfectly but still the crash report appeared.
    It's really important for me to get back my bookmarks and passwords since I am an MSc student at the end of my course and time wasting at such a critical time period for my studies could be disastrous!!
    I would appreciate your quick response..
    Kind Regards,
    Amalia Sfakianaki

    your crashreport say that you are using Firefox 9 beta, please try Firefox 8 and check
    * getfirefox.com

Maybe you are looking for