Summary figures are not desired in queries on hierarchy node level...

Dear Experts,
we use a hierarchy for a characteristic in a query. It has many characteristic nodes and under them characteristic values. We do want to have displayed the summeries on char. node level, but only on char. values level. How can we do that?
Thanks.

Hi Joe,
Have you got any answer or solution for this question?
Best Wishes,
BVC

Similar Messages

Scientific fluorescence figures are not displayed correctly on iPad

I use the iPad 1 for reading scientific papers, and I figured out that some fluorescence figures are not displayed correctly. The colours are not correctly distinguished, even some colours are completely missing. Is this a limitation of the iPad display or the current version of iOS.
I am really disappointed. So, is there any solution?
Many thanks.
On MacBook Pro
On iPad 1

I am woundering if anyone can suggest any solution? Thank you.

Some key figure are not update for movement type 101

Dear All,
I have done load for Inventory and now i am finding that for some material the with movement type 101 the key figures are not getting populated, for these materials the values in characteristics is getting populated fine.
I have loaded the data according to stranded procedure in "How to Load...."
I have checked the values of material in R3 and it is there.
Example of the record::
Material    Plant Movement type Calender Day    quanity Base Unit
10101      01       350                     01.02.2006     20             KG
10101        01       101                     05.07.2006                      KG
10101         01      101                      10.07.2006                      KG
The Quantity is not appearing in second and third record.

Hi,
Please check whether you have set ''Rule groups'' at transfermation level . There you can set the conditions like materials having movement type X can be updated to one Key Figure and material having movement type Y can be updated to another Key figure.
Please check whether you have set this option at transfermation level.
For example, may be in your case materials from different plants are updating to different key figure.
Thanks,
Edited by: kavitha nagandla on Feb 17, 2010 7:19 AM

Reg:F.19 report figures are not tallying with gl account 208030. Why?

hi boss
F.19 report figures are not tallying with gl account 208030. Why?
pls urgent
amk

Hi,
We have had GO-LIVE on 2008 April. They have executed balances carry forwrad for 2008 only. Do they need to carry forward balances for 2007 also?
Is this the reason, that the system is showing differances in F.08 report.
Kindly help me
Thanks
Kishore
Edited by: Emergys Corp on Nov 24, 2009 8:56 AM

Some key figures are not being correctly reversed in the Change Log

Hi Experts,
I'm working with the BI 7 (SP 15) and I have created an ODS with Overwrite option (Record Mode equal to ' ') and a Cube receiving data from this ODS.
Whenever I have a change in one existing record in R/3 side (already previously loaded to BW), it comes perfectly to the ODS and overwrite the record in the Active Data. However, in the change log table, the before image record is not reversing all the key figures, there is one (Quant type) which is not working and it is being doubled in the cube. All the other key figures are Amount type and are working fine. PLease see below some examples of the Change Log behavior:
First time the record comes - Change log content:
Material   Valid Dt   Cost Value      Quantity Rec. Mode      Req. ID
1234     May/01   $ 100.00       10          'N'     1
Second time when the record changes the Date:
Material     Date      Cost Value      Quantity Rec. Mode      Req. 1234     May/29   $ 100.00       10          ' '     2
1234     May/01   $ -100.00       10          'X'     2
Then the final result in the cube, after it is compressed, is:
Material     Date      Cost Value      Quantity
1234     May/29   $ 100.00       20
Also, I have a Counter in the transformation to the Cube which is a constant equal to 1, it is also being aggregated erroneously. I could create a routine to check the record mode coming, but I'm not sure it is the best solution.
Can anybody help me to figure this out, please?
Thanks in advance.

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

Why key figures are not displaying

Dear Experts,
I am faced with a problem not encountered before. My report has multiple key figures all of which are not displayed when I run the query. However if I change the view to Tabular format (from query properties) the key figures become visible.
Request your help in resolving the issue.

Hi,
are you hidden the some key figures? please check.
select the KF -> go to properties -> check the display tab - hide/show/hide can be shown.
if not close and open one more time in query designer.
Thanks,
Phani.

Hidden Key figures are not being displayed after unhiding

We've applied SP 14 - SP 22 in our 3.1C BW system. Prior to the patches going in, users were able to unhide hidden key figures through the Change Query local view and view them in the report once the query was executed. After the patches were applied, even though the key figures
were unhiden through the change query local view, they are not returned in the report after executing the
query.
As anyone run across this after appling this patch level ?

Hi Rajkumar,
Actually it is a generic extractor (customized) and the ODS active data is getting the delta records correctly. After I extract from R/3 and activate the ODS, the active table has correct results, but the change log table has the problem described before. All the fields comes from one single extractor.
The 0RECORDMODE that I mentioned is about the setting in the transformation to the ODS. You have the Technical rule group where you can set the 0RECORDMODE, in my case it is set to ' ' (blank) which means it will receive After-Images from the extractor (which I think is correct in my case). The most curious is that it is working for almost all key figures (all amount type), except for the Price Unit which is Quantity type.
Any other ideas?
Thanks.

In Query key figure are not populated

Hi Gurus,
i am using a RSCRMBAPI to get the out put of my query into a Ztable but when i run my program the Ztable is getting data but no key figures are getting populated.
plz help
thanks
neelu

Hi gurus,
i just have 1.6lac records with six keyfigures so i think its not the problem of limitation...
then can somebody help me how to get rid of this, no key figure values are getting populated
thanks and regards
Neel

Key figures are not available when i performing LBWE action

Hi gurus,
I am trying to load 2lis_02_hdr, 2lis_02_itm and 2lis_02_scl to infocube 0pur_c04.
But whatever the key figures available in the cube its not appear in the R/3 side data Source.. but those keyfigures are available in LIS structure.. for that how can i bring those key figures to dataSource for using LO Cockpit..
I heard we need to perform some prerequistes in SBIW.. let me know in breif with step by step..
Full points will assign to all those reply my query early..
Please let me know if not understand my query..
Thanks in Advance

Hello Sudheer
2LIS_02_HDR, ITM and SCL do not take data from S011 but directly from transactionnal tables like EBEP, EBKO, EBPO (names quoted from memory).
So you have to look for the key figures from those tables and not the one in S011.
Historically, the three datasource were built to replace 2LIS_02_S011 but the calculations to rebuild the keyfigures were delivered in BW in an old BCT that made the conversions. The logic and modeling have changed completely.
If you really need to transfer S011 to BW without remodelling the data, you may want to use a generic extractor based on S011 (provided you have a delta key available).
Otherwise, in SBIW, Options for datasource specific to the application, Logistics, purchasing, you have two customizing transactions. you have to define branch and process key to load data into BW. But that will not have any effect to LBWE.
Hope this helps.
Regards
Fabrice

Key figures are not appearing in the reports ?

Hi Guys,
After integration process BW with Crystal 2008. I have tried to build a report on Bex query on top the Infocube. I could not fine key figures. Can you guys help me out ?

Hi,
can you run the BEx query in transaction RSRT without any issues and keyfigures are shown ?
Ingo

Virtual Key Figures- RSRT says Key Figures are not valid

Hi,
Getting the following mssg when I try to generate a query in RSRT for the first time after I have coded Virtual Key Figures.
For the characteristic that I am pulling the user entered data from:
/BIC/ZNEWEST is not a valid characteristic for InfoProvider 0QM_C08
Message no. BRAIN122
Diagnosis
"Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZNEWEST as the characteristic to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08.
System response
/BIC/ZNEWEST is ignored.
Procedure
Check the exit."
From the key figure I am using this info to populate value:
"/BIC/ZKF3 is not a valid key figures for InfoProvider 0QM_C08
Message no. BRAIN121
Diagnosis
Customer enhancement RSR00002 or the implementation of BAdI RSR_OLAB_BADI delivers /BIC/ZKF3 as the key figure to be calculated. 1. is however not a valid key figure for Infoprovider 0QM_C08 or /BIC/ZKF3 references the key figure . In this case, the basic key figure l is enough to calculate in the exit.
System response
/BIC/ZKF3 is ignored.
Procedure
Check the exit."
Any help would be appreciated.
This is my first time using Virtual KF's.
Thanks,
Brandon

Hi Ajay,
Here is my code:
      FORM user_0QM_C08                                            *
--> L_S_RKB1D                                                      *
--> C_S_DATA                                                       *
FORM user_0QM_C08 USING l_s_rkb1d   TYPE rsr_s_rkb1d
                     CHANGING c_s_data TYPE any.
*-- Local data
DATA: l_n TYPE n,
        FIN1 like /bic/azqm_O5000-/BIC/ZPFINNT,
       FIN2 like /bic/azqm_O5000-/BIC/ZPFINNT,
       STAR1 like /bic/azqm_O5000-/BIC/ZPFINNT,
        STAR2 like /bic/azqm_O5000-/BIC/ZPFINNT,
        TASK type STRING.
*-- Field Symbols
FIELD-SYMBOLS <ZNEWEST>.
FIELD-SYMBOLS <ZOLDEST>.
FIELD-SYMBOLS <ZPSTARNT>.
FIELD-SYMBOLS <ZPFINNT>.
FIELD-SYMBOLS <ZKF3>.
FIELD-SYMBOLS <ZKF4>.
FIELD-SYMBOLS <0NOTIFICATN>.
*->>> Initial checks
SELECT SINGLE * FROM zvir_reports
         WHERE infocube = l_s_rkb1d-infocube
         AND    compid    = l_s_rkb1d-compid.
CHECK sy-subrc IS INITIAL.
*->>> Prepare the structure
ASSIGN COMPONENT g_pos_0QM_C08_ZNEWEST
    OF STRUCTURE c_s_data TO <ZNEWEST>.
ASSIGN COMPONENT g_pos_0QM_C08_ZOLDEST
    OF STRUCTURE c_s_data TO <ZOLDEST>.
ASSIGN COMPONENT g_pos_0QM_C08_ZPSTARNT
    OF STRUCTURE c_s_data TO <ZPSTARNT>.
ASSIGN COMPONENT g_pos_0QM_C08_ZPFINNT
    OF STRUCTURE c_s_data TO <ZPFINNT>.
ASSIGN COMPONENT g_pos_0QM_C08_0NOTIFICATN
    OF STRUCTURE c_s_data TO <0NOTIFICATN>.
*~~~>Changeable
ASSIGN COMPONENT g_pos_0QM_C08_zKF3
    OF STRUCTURE c_s_data TO <ZKF3>.
ASSIGN COMPONENT g_pos_0QM_C08_zKF4
    OF STRUCTURE c_s_data TO <ZKF4>.
*do not go thru code if user fields are blank.
IF <znewest> IS INITIAL OR <zoldest> IS INITIAL.
Exit.
Endif.
*-->>> Read general data
CLEAR: /BIC/AZQM_O5000, FIN1, FIN2, STAR1, STAR2, TASK.
TASK = 'SCM'.
get Start1 time
SELECT /BIC/ZPSTARNT   FROM /bic/azqm_O5000 INTO STAR1
         WHERE notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZNEWEST      EQ <ZNEWEST>.
ENDSELECT.
Get Finish1 time
SELECT /BIC/ZPFINNT   FROM /bic/azqm_O5000 INTO FIN1
         WHERE notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZNEWEST      EQ TASK.
ENDSELECT.
Get Finish2 time & Start2 time
SELECT /BIC/ZPFINNT /BIC/ZPSTARNT FROM /bic/azqm_O5000 INTO (FIN2 ,
STAR2)
         WHERE notificatn        EQ <0NOTIFICATN>
         AND    /bic/ZOLDEST      EQ <ZOLDEST>.
ENDSELECT.
*- Update key figures
<zKF3> = abs( FIN1 - STAR2 ).
<zKF4> = abs( STAR1 - FIN2 ).
ENDFORM.                    "user_0QM_C08
Thx

KE30 - Tax figures are not appearing

Hi Gurus,
When I run KE30 report field 'Taxes' do not show any value. So I maintained condition type MWST for value field VVN30 in KE4I. Howver it didn't work out. Can anybody help me out?

Hi Pushkar
Taxes do not flow to COPA, because the Tax accounts are balance sheet accounts... Only P&L accounts with cost element category 11 or 12 can flow to COPA during SD billing
You need to follow the below steps to achieve this
1. Create a New condition type in SD, ZTAX
2. The condition record of ZTAX will be 100% and based on MWST
3. Mark this condition type as statistical in SD pricing procedure
4. In KE4I, replace MWST with ZTAX and mapp it to a value field there...
This is a tried and tested approach.. It works for sure!!
Regards
Ajay M

Calculate key figures are not important to reports

Hello Experts,
How can I delete a calculated key figure from the query when the change of report query is not accessible from the analyzer?
Thank you

If you can create a new workbook you can. Simpy right-click on "Key figures" in the BEx Analyzer, remove the specific C-KF from the displayed list of keyfigures and the save the Workbook. You should check if you have the authorization rights to save this new Workbook into existing roles, or just your Favourites.
Altering the Query is a bit more work though.

Map.Entry not supported in queries?

Hi,
I tried to run the following JDO query:
Query query = pm.newQuery(SomeClass.class);
query.setFilter("someMap.contains(entry) && entry.key == value");
query.setOrdering("entry.value ascending");
query.declareVariables("java.util.Map.Entry entry");
query.declareParameters("String value");
Object result = query.execute(someValue);
where someMap is an attribute of SomeClass which is of type java.util.Map
but I received the following exception:
kodo.util.UserException: The type "java.util.Map.Entry" as used in the
variable/parameter declarations could not be found in the imports.
     at kodo.query.AbstractQuery.bindClasses(AbstractQuery.java:1507)
     at kodo.query.AbstractQuery.bindVariables(AbstractQuery.java:1480)
     at kodo.query.AbstractQuery.internalCompile(AbstractQuery.java:501)
     at kodo.query.AbstractQuery.compileForParse(AbstractQuery.java:456)
     at kodo.query.AbstractQuery.getParameterTypes(AbstractQuery.java:1198)
I've also tried specify Map.Entry as "java.util.Map$Entry" and it also
doesn't work. Does it mean that Map.Entry or inner classes are not
supported in queries?
Someone please help,
Stephen

Stephen-
Map.Entry is not supported in queries (although you could conveivably
write a query extension that supports it).
Note that it does look like you can you the supported filter
"someMap.containsKey(keyParam)" (which would do the same thing as your
query "someMap.contains(entry) && entry.key == value").
In article <cc5jbq$c49$[email protected]>, Stephen Leung wrote:
Hi,
I tried to run the following JDO query:
Query query = pm.newQuery(SomeClass.class);
query.setFilter("someMap.contains(entry) && entry.key == value");
query.setOrdering("entry.value ascending");
query.declareVariables("java.util.Map.Entry entry");
query.declareParameters("String value");
Object result = query.execute(someValue);
where someMap is an attribute of SomeClass which is of type java.util.Map
but I received the following exception:
kodo.util.UserException: The type "java.util.Map.Entry" as used in the
variable/parameter declarations could not be found in the imports.
     at kodo.query.AbstractQuery.bindClasses(AbstractQuery.java:1507)
     at kodo.query.AbstractQuery.bindVariables(AbstractQuery.java:1480)
     at kodo.query.AbstractQuery.internalCompile(AbstractQuery.java:501)
     at kodo.query.AbstractQuery.compileForParse(AbstractQuery.java:456)
     at kodo.query.AbstractQuery.getParameterTypes(AbstractQuery.java:1198)
I've also tried specify Map.Entry as "java.util.Map$Entry" and it also
doesn't work. Does it mean that Map.Entry or inner classes are not
supported in queries?
Someone please help,
Stephen
Marc Prud'hommeaux
SolarMetric Inc.

IK Bone Tool Bones are not Displaying

This may be a very dumb question, but how do you get the bones to display?
I have connected 5 graphics together with the bone tool, but when I was clicking and dragging the bones did not appear. The armature was created and I can click and drag them into position, BUT I only see the end result and it doesn't show what the armature is doing while I'm dragging it around.
When I select the armature layer, I don't see the bones either. The only reason I know it works is that when I click and release the armature, it is moved to a position normally produced by the bone tool.
In summary:
Bones are not displaying.
Armature is not animating when being dragged.
Any help would be great.
Cheers,
Mike.

Hi Mike,
Were you using Actionscript 2.0 or 3.0 document? The bone visibility is available only when you use Actionscript 3.0 document.
Quynh

Summary figures are not desired in queries on hierarchy node level...

Similar Messages

Maybe you are looking for