Summation issue in ALV

Hi,
I developed a report in ALV using HR_DISPLAY_BASIC_LIST. The problem is that the summation icon is not appearing in the top bar. I need to calculate totals for 4 columns, but I cannot seem to enable the functionality. A colleague of mine suggested that I use REUSE_ALV_GRID_DISPLAY instead. How do I change my output function from HR_DISPLAY_BASIC_LIST to REUSE_ALV_GRID_DISPLAY? Is there any simple mapping? I also need the top pane that appears in HR_DISPLAY_BASIC_LIST as it is used to display certain information. To get that in REUSE_ALV_GRID_DISPLAY it seems I have to code for top-of-page as well to anable that. If possible I would like to enable summation functionality in HR_DISPLAY_BASIC_LIST as this seems to be the simplest option. If this is not possible, how do I map my output to REUSE_ALV_GRID_DISPLAY? Help is appreciated, thanks.
Regards,
Khan

Hello ,
Use Reuse_alv_grid_display function module.
and pass datatype or inttype property to fields
on which you want to do summation during creation of fieldcatalog so it will show summation icon on status bar.

Similar Messages

Issue in ALV List display

Issue in ALV List display
Posted: Apr 5, 2008 10:25 AM Edit E-mail this message Reply
Hi Friends,
Can any one help me out in the logic to display the output in the ALV list.
i want to get the out put as
based on the field4 i have to display fieds5, field6 and field 7 values as mentioned below.
field1 field2 field3 field4 field5 field6 field7
0L 123 456 2008 001 123.00 456.00
- - - - 002 213.00 789.00
- - - 003 0.00 0.00
- - - 004 0.00 0.00
- - - 005 0.00 0.00
- - - 006 0.00 0.00
 336.00 1245.00
Thanks,
Vijay

for display you have to define fieldcatlaog and use Fm RESUE_ALV_GRID_DISPLAY,
Go through this program
*& Report Z_OPEN_CLOSE *
REPORT Z_OPEN_CLOSE MESSAGE-ID YW2 LINE-SIZE 231 LINE-COUNT 45
NO STANDARD PAGE HEADING.
Type Declaration *
TYPE-POOLS SLIS.
Tables *
TABLES: MKPF, " Material Document: Header Data
 MSEG, " Material Document: Item Data
 MARA,
 MARD,
 S031,
 EKKO,
 EKPO,
 LIKP,
 MAKT,
 J_1IWRKCUS,
 T001W,
 WB2_V_MKPF_MSEG2,
 MMIM_REP_PRINT,
 YW2_STKMOVEMENTS,
 YPLNT,
 MARDH.
Internal Tables *
DATA: I_WERKS LIKE J_1IWRKCUS OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_YPLNT OCCURS 0,
 PPLNT LIKE YPLNT-PPLNT,
 WPLNT LIKE YPLNT-WPLNT,
 END OF I_YPLNT.
DATA: BEGIN OF I_MKPF OCCURS 0,
 MBLNR LIKE MKPF-MBLNR,
 MJAHR LIKE MKPF-MJAHR,
 BUDAT LIKE MKPF-BUDAT,
 VGART LIKE MKPF-VGART,
 BWART LIKE MSEG-BWART,
 MATNR LIKE MSEG-MATNR,
 WERKS LIKE MSEG-WERKS,
 LGORT LIKE MSEG-LGORT,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 KUNNR LIKE MSEG-KUNNR,
 ZEILE LIKE MSEG-ZEILE,
 XAUTO LIKE MSEG-XAUTO,
 SHKZG LIKE MSEG-SHKZG,
 MATNR1 LIKE MSEG-MATNR,
 END OF I_MKPF.
DATA: BEGIN OF I_MARDH OCCURS 0,
 WERKS LIKE MARDH-WERKS,
 MEINS LIKE MARA-MEINS,
 MATNR LIKE MARDH-MATNR,
 LGORT LIKE MARDH-LGORT,
 LABST LIKE MARDH-LABST,
 LFGJA LIKE MARDH-LFGJA, "Added -MB
 LFMON LIKE MARDH-LFMON, "Added -MB
 PERIO(6),
 INSME LIKE MARDH-LABST,
 EINME LIKE MARDH-LABST,
 SPEME LIKE MARDH-LABST,
 RETME LIKE MARDH-LABST,
 O_STK LIKE MARDH-LABST, " Opening Stock
 C_STK LIKE MARDH-LABST, " Closing Stock
 END OF I_MARDH.
DATA: BEGIN OF I_MARD OCCURS 0,
 WERKS LIKE MARD-WERKS,
 MATNR LIKE MARD-MATNR,
 LGORT LIKE MARD-LGORT,
 LABST LIKE MARD-LABST,
 INSME LIKE MARD-LABST,
 MEINS LIKE MARA-MEINS,
 EINME LIKE MARD-LABST,
 SPEME LIKE MARD-LABST,
 RETME LIKE MARD-LABST,
 END OF I_MARD.
DATA: I_MARD1 LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: I_MARDH1 LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_MKPF1 OCCURS 0,
 MBLNR LIKE MKPF-MBLNR,
 WERKS LIKE MSEG-WERKS,
 MATNR LIKE MSEG-MATNR,
 BUDAT LIKE MKPF-BUDAT,
 BWART LIKE MSEG-BWART,
 MJAHR LIKE MKPF-MJAHR,
 VGART LIKE MKPF-VGART,
 LGORT LIKE MSEG-LGORT,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 XAUTO LIKE MSEG-XAUTO,
 SHKZG LIKE MSEG-SHKZG,
 END OF I_MKPF1.
DATA: BEGIN OF I_MKPF2 OCCURS 0,
 WERKS LIKE MSEG-WERKS,
 MATNR LIKE MSEG-MATNR,
 BUDAT LIKE MKPF-BUDAT,
 BWART LIKE MSEG-BWART,
 MJAHR LIKE MKPF-MJAHR,
 VGART LIKE MKPF-VGART,
 LGORT LIKE MSEG-LGORT,
 MENGE LIKE MSEG-MENGE,
 MEINS LIKE MSEG-MEINS,
 XAUTO LIKE MSEG-XAUTO,
 END OF I_MKPF2.
DATA: BEGIN OF I_FINAL5 OCCURS 0,
 WERKS LIKE MSEG-WERKS, " Plant
 MATNR LIKE MSEG-MATNR, " Material
 LGORT LIKE MSEG-LGORT, " Storage Location
 BUDAT LIKE MKPF-BUDAT, " Posting Date
 MTART LIKE MARA-MTART, " Material Type
 SPMON LIKE S031-SPMON, " Month
 MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
 MEINS LIKE MSEG-MEINS,
 O_STK LIKE MARDH-LABST, " opening stock
 TRECEP LIKE MARDH-LABST, " total receipts
 PRODU LIKE MARDH-LABST, " Net Receipts - Production
 RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
 SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
 TDISP LIKE MARDH-LABST, " total dispatches
 CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
 OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
 TLOSS LIKE MARDH-LABST, " Total Loss
 TRLOSS LIKE MARDH-LABST, " Transit Loss
 WHLOSS LIKE MARDH-LABST, " Warehouse Loss
 C_STK LIKE MARDH-LABST, " Closing Stock
 TRFSTK LIKE MARDH-LABST, "Transfer stock
 MENGE LIKE MSEG-MENGE,
 OTHADJ LIKE MARDH-LABST,
 END OF I_FINAL5.
DATA: BEGIN OF I_FINAL OCCURS 0,
 WERKS LIKE MSEG-WERKS, " Plant
 MATNR LIKE MSEG-MATNR, " Material
 BUDAT LIKE MKPF-BUDAT, " Posting Date
 MTART LIKE MARA-MTART, " Material Type
 SPMON LIKE S031-SPMON, " Month
 MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
 MEINS LIKE MSEG-MEINS,
 O_STK LIKE MARDH-LABST, " opening stock
 TRECEP LIKE MARDH-LABST, " total receipts
 PRODU LIKE MARDH-LABST, " Net Receipts - Production
 RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
 SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
 TDISP LIKE MARDH-LABST, " total dispatches
 CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
 OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
 TRFSTK LIKE MARDH-LABST, "Material Transfer stock
 TRLOSS LIKE MARDH-LABST, " Transit Loss
 WHLOSS LIKE MARDH-LABST, " Warehouse Loss
 TLOSS LIKE MARDH-LABST, " Total Loss
 C_STK LIKE MARDH-LABST, " Closing Stock
 OTHADJ LIKE MARDH-LABST,
 END OF I_FINAL.
DATA: I_FINAL1 LIKE I_FINAL OCCURS 0 WITH HEADER LINE.
DATA: BEGIN OF I_FINAL_TEMP OCCURS 0,
 WERKS LIKE MSEG-WERKS, " Plant
 MATNR LIKE MSEG-MATNR, " Material
 MTART LIKE MARA-MTART, " Material Type
 MAKTX LIKE MAKT-MAKTX, " Description
 MEINS LIKE MSEG-MEINS,
 O_STK LIKE MARDH-LABST, " opening stock
 TRECEP LIKE MARDH-LABST, " total receipts
 PRODU LIKE MARDH-LABST, " Net Receipts - Production
 RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
 SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
 TDISP LIKE MARDH-LABST, " total dispatches
 CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
 OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
 TRFSTK LIKE MARDH-LABST, "Material Transfer stock
 TRLOSS LIKE MARDH-LABST, " Transit Loss
 WHLOSS LIKE MARDH-LABST, " Warehouse Loss
 TLOSS LIKE MARDH-LABST, " Total Loss
 C_STK LIKE MARDH-LABST, " Closing Stock
 OTHADJ LIKE MARDH-LABST,
 END OF I_FINAL_TEMP.
For Materials
DATA: BEGIN OF I_MARA OCCURS 0,
 MATNR TYPE MARA-MATNR,
 MTART TYPE MARA-MTART,
 MEINS LIKE MARA-MEINS,
 LABST TYPE MARD-LABST,
 MAKTX LIKE MAKT-MAKTX,
 END OF I_MARA.
DATA: BEGIN OF I_STKMVMNTS OCCURS 0,
 BWART LIKE MSEG-BWART,
 SHKZG LIKE MSEG-SHKZG,
 VZBEW LIKE YW2_STKMOVEMENTS-VZBEW,
 END OF I_STKMVMNTS.
DATA: BEGIN OF I_FINALT OCCURS 0,
 WERKS LIKE MSEG-WERKS, " Plant
 MATNR LIKE MSEG-MATNR, " Material
 BUDAT LIKE MKPF-BUDAT, " Posting Date
 MTART LIKE MARA-MTART, " Material Type
 SPMON LIKE S031-SPMON, " Month
 MAKTX LIKE MAKT-MAKTX, " Description
meins(3), " UOM
 MEINS LIKE MSEG-MEINS,
 O_STK LIKE MARDH-LABST, " opening stock
 TRECEP LIKE MARDH-LABST, " total receipts
 PRODU LIKE MARDH-LABST, " Net Receipts - Production
 RECEP LIKE MARDH-LABST, " Net Receipts - Receipts
 SAL_RET LIKE MARDH-LABST, " Net Receipts - Sales Return
 TDISP LIKE MARDH-LABST, " total dispatches
 CUSTMR LIKE MARDH-LABST, " Net Dispatches - Customers
 OPLANT LIKE MARDH-LABST, " Net Dispatches - To Other Plant
 TRFSTK LIKE MARDH-LABST, "Material Transfer stock
 TRLOSS LIKE MARDH-LABST, " Transit Loss
 WHLOSS LIKE MARDH-LABST, " Warehouse Loss
 TLOSS LIKE MARDH-LABST, " Total Loss
 C_STK LIKE MARDH-LABST, " Closing Stock
 OTHADJ LIKE MARDH-LABST,
 MONTH(8) ,
 END OF I_FINALT.
DATA: IMKPFT LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT1 LIKE I_MKPF1 OCCURS 0 WITH HEADER LINE.
DATA: IMARDT LIKE I_MARD OCCURS 0 WITH HEADER LINE.
DATA: IMARDHT LIKE I_MARDH OCCURS 0 WITH HEADER LINE.
DATA: T_FINAL LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
DATA: IMKPFT2 LIKE I_MKPF OCCURS 0 WITH HEADER LINE.
FCAT is used for the field catalog
DATA: FCAT TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
for excluding the ICONs from the application toolbar
 FEXC TYPE TABLE OF SLIS_EXTAB WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
FS_LAYO is used for Grid Layout
 FS_LAYO TYPE SLIS_LAYOUT_ALV,
FEVENTS to handle the events TOP OF PAGE & USER_COMMAND
 FEVENTS TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
FHEADER is used for List header
 FHEADER TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
sort is used for sorting
 FSORT TYPE TABLE OF SLIS_SORTINFO_ALV WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
 FCAT1 TYPE TABLE OF SLIS_FIELDCAT_ALV WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
 FS_LAYO1 TYPE SLIS_LAYOUT_ALV,
 GT_LIST_TOP_OF_PAGE1 TYPE SLIS_T_LISTHEADER,
 FEVENTS1 TYPE TABLE OF SLIS_ALV_EVENT WITH NON-UNIQUE DEFAULT KEY
 WITH HEADER LINE INITIAL SIZE 0,
 FHEADER1 TYPE TABLE OF SLIS_LISTHEADER WITH NON-UNIQUE DEFAULT
 KEY WITH HEADER LINE INITIAL SIZE 0,
 G_STATU_071 TYPE SLIS_FORMNAME VALUE 'Z_PFSTATUS',
 ALV_VARIANT1 LIKE DISVARIANT.
Variable Declaration *
TYPES: TRFF_TYPE_DEC_6_5(6) TYPE P DECIMALS 5.
DATA: FYEAR(4),
 MON(2),
 FYEAR1(4),
 MON1(2),
 OBAL LIKE MARD-LABST,
 CBAL LIKE MARD-LABST,
 INDEX TYPE I,
 COUNT,
 COUNT1 TYPE I,
 O_STK TYPE P DECIMALS 3,
 C_STK TYPE P DECIMALS 3,
 V_MJAHR LIKE MKPF-MJAHR,
 MONTHS TYPE TRFF_TYPE_DEC_6_5,
 MONTH TYPE I.
Global variables for handling ALV functionality
DATA: ALV_KEYINFO TYPE SLIS_KEYINFO_ALV,
 ALV_VARIANT LIKE DISVARIANT,
 ALV_LAYOUT TYPE SLIS_LAYOUT_ALV,
 ALV_REPID LIKE SY-REPID,
 ALV_PRINT TYPE SLIS_PRINT_ALV,
 ALV_DETAIL_FUNC(30),
 ALV_DEFAULT_VARIANT LIKE DISVARIANT-VARIANT,
 ALV_COLOURIZE_FIELDS LIKE MMIM_REP_PRINT-COLOR.
RANGES: R_BUDAT FOR MKPF-BUDAT.
*Added by Prabhu for year on 26.4.05.
DATA: IDATE LIKE R_BUDAT OCCURS 0 WITH HEADER LINE.
Selection Screen Elements *
SELECTION-SCREEN BEGIN OF BLOCK BLK WITH FRAME TITLE TEXT-001.
SELECT-OPTIONS: S_WERKS FOR MARD-WERKS OBLIGATORY NO INTERVALS.
PARAMETER: P_SPMON LIKE S031-SPMON NO-DISPLAY .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR OBLIGATORY,
 S_LGORT FOR MSEG-LGORT NO-EXTENSION NO INTERVALS,
 S_MBLNR FOR MKPF-MBLNR,
 S_BUDAT FOR MKPF-BUDAT OBLIGATORY .
SELECTION-SCREEN END OF BLOCK BLK.
SELECTION-SCREEN BEGIN OF BLOCK BLK3 WITH FRAME TITLE TEXT-004.
 PARAMETER : MTART LIKE MARA-MTART DEFAULT 'FERT' NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK BLK3.
SELECTION-SCREEN BEGIN OF BLOCK BLK2 WITH FRAME TITLE TEXT-003.
SELECTION-SCREEN END OF BLOCK BLK2.
ADDED BY PRABHU FOR DAY-WISE REPORT.
SELECTION-SCREEN BEGIN OF BLOCK B3 WITH FRAME TITLE TEXT-007.
PARAMETERS: D1 RADIOBUTTON GROUP P1 DEFAULT 'X',
 M1 RADIOBUTTON GROUP P1,
 Y1 RADIOBUTTON GROUP P1.
SELECTION-SCREEN END OF BLOCK B3.
SELECTION-SCREEN BEGIN OF BLOCK B2 WITH FRAME TITLE TEXT-006.
PARAMETERS: ALV_DEF LIKE DISVARIANT-VARIANT.
SELECTION-SCREEN END OF BLOCK B2.
DATA: S_BUDAT1 LIKE S_BUDAT OCCURS 0 WITH HEADER LINE."prabhu
Initialization *
INITIALIZATION.
PERFORM ALV_INIT.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ALV_DEF.
PERFORM ALV_F4.
At Selection Screen
*AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_spmon.
PERFORM monat_f4.
At Selection Screen *
AT SELECTION-SCREEN.
checking for the layout
PERFORM ALV_CHECK.
authorisation check for the Plant
PERFORM auth_check.
Validation for the Plant
PERFORM VALIDITY_CHECK.
IF MTART NE 'FERT'.
 MESSAGE E041 WITH 'Material Type must be FERT Only...'.
ENDIF.
IF D1 = 'X'." On 26.4.05.
 P_SPMON0(4) = S_BUDAT-LOW0(4).
 P_SPMON4(2) = S_BUDAT-LOW4(2).
ELSE.
 P_SPMON0(4) = S_BUDAT-LOW0(4).
 P_SPMON4(2) = S_BUDAT-LOW4(2).
ENDIF.
LOOP AT S_BUDAT.
 IF S_BUDAT-HIGH IS INITIAL.
 S_BUDAT-HIGH = S_BUDAT-LOW.
 MODIFY S_BUDAT.
 ENDIF.
ENDLOOP.
IDATE-LOW = S_BUDAT-LOW.
IDATE-HIGH = S_BUDAT-HIGH.
CALL FUNCTION 'FIMA_DAYS_AND_MONTHS_AND_YEARS'
 EXPORTING
 I_DATE_FROM = IDATE-LOW
 I_DATE_TO = IDATE-HIGH
 IMPORTING
E_DAYS =
 E_MONTHS = MONTH
E_YEARS =
DATA: I(3) TYPE C.
I = S_BUDAT-LOW+4(2).
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*added by Prabhu for Only for Oneday.on 18.5.5
IF MONTH EQ '0'.
 MONTH = MONTH + 1.
ENDIF.
*added by Prabhu for Only for Oneday.on 18.5.5
DO MONTH TIMES.
 R_BUDAT-LOW = S_BUDAT-LOW.
 APPEND R_BUDAT.
ENDDO.
I = 0.
LOOP AT R_BUDAT.
 R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2) + I.
 I = I + 1.
 R_BUDAT-LOW+6(2) = '01'.
 MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
 CALL FUNCTION 'RP_LAST_DAY_OF_MONTHS'
 EXPORTING
 DAY_IN = R_BUDAT-LOW
 IMPORTING
 LAST_DAY_OF_MONTH = R_BUDAT-HIGH
 EXCEPTIONS
 DAY_IN_NO_DATE = 1
 OTHERS = 2
 MODIFY R_BUDAT.
ENDLOOP.
LOOP AT R_BUDAT.
 IF R_BUDAT-LOW4(2) = S_BUDAT-LOW4(2).
 R_BUDAT-LOW = S_BUDAT-LOW.
 MODIFY R_BUDAT.
 ENDIF.
 IF R_BUDAT-HIGH4(2) = S_BUDAT-HIGH4(2).
 R_BUDAT-HIGH = S_BUDAT-HIGH.
 MODIFY R_BUDAT.
 ENDIF.
For Summary on 26.4.05.
 IF Y1 = 'X'.
 CLEAR R_BUDAT.
 REFRESH R_BUDAT.
 R_BUDAT-LOW = S_BUDAT-LOW.
 R_BUDAT-HIGH = S_BUDAT-HIGH.
 APPEND R_BUDAT.
 CLEAR R_BUDAT.
 ENDIF.
ENDLOOP.
At Selection Screen *
AT SELECTION-SCREEN OUTPUT.
Start of Selection *
START-OF-SELECTION.
V_MJAHR = P_SPMON+0(4).
Get plant distinction warehouse/production
PERFORM GET_PLANT_DISTINCTION.
Collect the data from various tables
PERFORM GETDATA_FG_STOCK.
here the number of rows in the output table is found
PERFORM OUTPUT_TABLE_CHECK.
here the top of the page code is written, that is to be displayed
in the output
PERFORM Z_TOP_OF_PAGE.
here ALV layout properties are set
PERFORM Z_LAYOUT_SETTINGS.
ALV EVENTS for TOP OF PAGE and for USER COMMAND
PERFORM Z_ALV_EVENTS.
The field catalog is defined for the Primary List is defined in
the subroutine CREATE_FIELD_CATALOG include program ZPRRDOCR_FCAT
PERFORM Z_CREATE_FIELD_CATALOG.
This is for displaying the output
PERFORM Z_REUSE_ALV_GRID_DISPLAY.
*& Form getdata_fg_stock
Getting data from standard tables
FORM GETDATA_FG_STOCK.
For getting the Start date & end date of the month
PERFORM get_month_dates.
Getting the Opening Stock from MARDH table
IF MON EQ '01'.
 MON1 = MON.
 FYEAR1 = FYEAR.
 MON = '12'.
 FYEAR = FYEAR - 1.
ELSE.
 MON1 = MON.
 FYEAR1 = FYEAR.
 MON = MON - 1.
 FYEAR = FYEAR.
ENDIF.
PERFORM GET_RECORDS_FROM_DB.
*added for Month Summary on 26.4.05.
LOOP AT R_BUDAT.
 S_BUDAT-LOW = R_BUDAT-LOW.
 S_BUDAT-HIGH = R_BUDAT-HIGH.
*for Month
 P_SPMON0(4) = S_BUDAT-LOW0(4).
 P_SPMON4(2) = S_BUDAT-LOW4(2).
*for summary.
 IF Y1 = 'X'.
 LOOP AT S_BUDAT.
 S_BUDAT1-SIGN = 'I'.
 S_BUDAT1-OPTION = 'NB'.
 S_BUDAT1-LOW = S_BUDAT-LOW.
 S_BUDAT1-HIGH = S_BUDAT-HIGH.
 APPEND S_BUDAT1.
 CLEAR S_BUDAT1.
 ENDLOOP.
 ENDIF.
 IMKPFT[] = I_MKPF[].
 IMKPFT2[] = I_MKPF[].
 IMARDT[] = I_MARD[].
 IMARDHT[] = I_MARDH[].
 PERFORM MONTH_WISE.
 PERFORM PROCESS_MOVEMENTS.
 PERFORM CALCULATE_OPENING_STOCK.
 PERFORM UPDATE_NON_TRANSACTION_ITMS.
 PERFORM DELETE_EMPTY_RECORDS.
 CLEAR: IMARDHT,IMARDT,IMKPFT1,IMKPFT,I_FINAL,I_FINAL5.
 REFRESH: IMARDHT,IMARDT,IMKPFT1,I_FINAL,I_FINAL5,IMKPFT.
ENDLOOP.
CLEAR: R_BUDAT.
REFRESH: R_BUDAT.
*end of changes for month.
ENDFORM. " getdata_fg_stock
FORM MONAT_F4 *
F4-Hilfe für Monat *
FORM MONAT_F4.
DATA: BEGIN OF MF_DYNPFIELDS OCCURS 1.
 INCLUDE STRUCTURE DYNPREAD.
DATA: END OF MF_DYNPFIELDS.
DATA: MF_RETURNCODE LIKE SY-SUBRC,
 MF_MONAT LIKE ISELLIST-MONTH,
 MF_HLP_REPID LIKE SY-REPID.
FIELD-SYMBOLS: .
Wert von Dynpro lesen
GET CURSOR FIELD MF_DYNPFIELDS-FIELDNAME.
APPEND MF_DYNPFIELDS.
MF_HLP_REPID = SY-REPID.
DO 2 TIMES.
 CALL FUNCTION 'DYNP_VALUES_READ'
 EXPORTING
 DYNAME = MF_HLP_REPID
 DYNUMB = SY-DYNNR
 TABLES
 DYNPFIELDS = MF_DYNPFIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 01
 INVALID_DYNPROFIELD = 02
 INVALID_DYNPRONAME = 03
 INVALID_DYNPRONUMMER = 04
 INVALID_REQUEST = 05
 NO_FIELDDESCRIPTION = 06
 UNDEFIND_ERROR = 07.
 IF SY-SUBRC = 3.
Aktuelles Dynpro ist Wertemengenbild
 MF_HLP_REPID = 'SAPLALDB'.
 ELSE.
 READ TABLE MF_DYNPFIELDS INDEX 1.
Unterstriche durch Blanks ersetzen
 TRANSLATE MF_DYNPFIELDS-FIELDVALUE USING '_ '.
 EXIT.
 ENDIF.
ENDDO.
IF SY-SUBRC = 0.
Konvertierung ins interne Format
 CALL FUNCTION 'CONVERSION_EXIT_PERI_INPUT'
 EXPORTING
 INPUT = MF_DYNPFIELDS-FIELDVALUE
 IMPORTING
 OUTPUT = MF_MONAT
 EXCEPTIONS
 ERROR_MESSAGE = 1.
 IF MF_MONAT IS INITIAL.
Monat ist initial => Vorschlagswert aus akt. Datum ableiten
 MF_MONAT = SY-DATLO(6).
 ENDIF.
 CALL FUNCTION 'POPUP_TO_SELECT_MONTH'
 EXPORTING
 ACTUAL_MONTH = MF_MONAT
 IMPORTING
 SELECTED_MONTH = MF_MONAT
 RETURN_CODE = MF_RETURNCODE
 EXCEPTIONS
 FACTORY_CALENDAR_NOT_FOUND = 01
 HOLIDAY_CALENDAR_NOT_FOUND = 02
 MONTH_NOT_FOUND = 03.
 IF SY-SUBRC = 0 AND MF_RETURNCODE = 0.
ASSIGN (MF_DYNPFIELDS-FIELDNAME) TO <MF_FELD>. " ==>> note 148804
<MF_FELD> = MF_MONAT.
 CALL FUNCTION 'CONVERSION_EXIT_PERI_OUTPUT'
 EXPORTING
 INPUT = MF_MONAT
 IMPORTING
 OUTPUT = MF_DYNPFIELDS-FIELDVALUE.
 COLLECT MF_DYNPFIELDS.
 CALL FUNCTION 'DYNP_VALUES_UPDATE'
 EXPORTING
 DYNAME = MF_HLP_REPID
 DYNUMB = SY-DYNNR
 TABLES
 DYNPFIELDS = MF_DYNPFIELDS
 EXCEPTIONS
 INVALID_ABAPWORKAREA = 01
 INVALID_DYNPROFIELD = 02
 INVALID_DYNPRONAME = 03
 INVALID_DYNPRONUMMER = 04
 INVALID_REQUEST = 05
 NO_FIELDDESCRIPTION = 06
 UNDEFIND_ERROR = 07. "<<== note 148804
 ENDIF.
ENDIF.
ENDFORM. "MONAT_F4
*& Form get_month_dates
Calculating the Month Start & End Date
FORM GET_MONTH_DATES.
IF M1 = 'X'.
 FYEAR = P_SPMON+0(4).
 MON = P_SPMON+4(2).
 CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
 R_BUDAT-SIGN = 'I'.
 R_BUDAT-OPTION = 'BT'.
 CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
 EXPORTING
 I_DATE = R_BUDAT-LOW
 IMPORTING
 E_DATE = R_BUDAT-HIGH.
 APPEND R_BUDAT.
 CLEAR S_BUDAT.
 REFRESH S_BUDAT.
 S_BUDAT-SIGN = 'I'.
 S_BUDAT-OPTION = 'BT'.
 S_BUDAT-LOW = R_BUDAT-LOW.
 S_BUDAT-HIGH = R_BUDAT-HIGH.
 APPEND S_BUDAT.
ELSE.
 FYEAR = P_SPMON+0(4).
 MON = P_SPMON+4(2).
 CONCATENATE FYEAR MON '01' INTO R_BUDAT-LOW.
 R_BUDAT-SIGN = 'I'.
 R_BUDAT-OPTION = 'BT'.
 CALL FUNCTION 'BKK_GET_MONTH_LASTDAY'
 EXPORTING
 I_DATE = R_BUDAT-LOW
 IMPORTING
 E_DATE = R_BUDAT-HIGH.
 APPEND R_BUDAT.
ENDIF.
ENDFORM. " get_month_dates
*& Form output_table_Check
checking for records for output
FORM OUTPUT_TABLE_CHECK .
DESCRIBE TABLE I_FINALT LINES INDEX.
IF INDEX EQ 0.
 MESSAGE I041 WITH TEXT-005.
 LEAVE LIST-PROCESSING.
ENDIF.
ENDFORM. "OUTPUT_TABLE_CHECK
*& Form Z_TOP_OF_PAGE
for setting the details in the top of page *
has no formal paramters *
FORM Z_TOP_OF_PAGE.
DATA: V_MON(2),
V_YR(40),
V_FIN(18),
V_FIN1(48),
LOW(10),
HIGH(10).
V_MON = P_SPMON+4(2).
V_YR = P_SPMON+0(4).
FHEADER-TYP = 'H'.
FHEADER-INFO = 'Stock Register Report (FG Stock)'.
APPEND FHEADER.
CLEAR FHEADER.
*if m1 = 'X'.
CONCATENATE 'Month = ' v_mon '.' v_yr INTO v_fin.
fheader-typ = 'H'.
fheader-info = v_fin.
APPEND fheader.
CLEAR fheader.
*endif."prabhu on 18.5.5
IF D1 = 'X'.
 CLEAR S_BUDAT.
 LOOP AT S_BUDAT.
 CONCATENATE S_BUDAT-LOW6(2) '/' S_BUDAT-LOW4(2) '/'
 S_BUDAT-LOW+0(4) INTO LOW.
 CONCATENATE S_BUDAT-HIGH6(2) '/' S_BUDAT-HIGH4(2) '/'
 S_BUDAT-HIGH+0(4) INTO HIGH.
 CONCATENATE 'Date = ' LOW ' - ' HIGH INTO V_FIN1.
 FHEADER-TYP = 'H'.
 FHEADER-INFO = V_FIN1.
 APPEND FHEADER.
 CLEAR FHEADER.
 ENDLOOP.
ENDIF.
ENDFORM. " Z_TOP_OF_PAGE
*& Form Z_LAYOUT_SETTINGS
this is done for setting the properties for the layout of the *
grid *
has no formal paramters *
FORM Z_LAYOUT_SETTINGS.
FS_LAYO-ZEBRA = 'X'. " Output in Zebra pattern
FS_LAYO-DETAIL_POPUP = 'X'. " A popup window appears to give
FS_LAYO-DETAIL_TITLEBAR = TEXT-022.
FS_LAYO-COLWIDTH_OPTIMIZE = 'X'.
ENDFORM. " Z_LAYOUT_SETTINGS
*& Form Z_ALV_EVENTS
This is used for handling the events TOP OF PAGE and the USER *
COMMAND event *
has no formal paramters *
FORM Z_ALV_EVENTS.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 I_LIST_TYPE = 0
 IMPORTING
 ET_EVENTS = FEVENTS[].
READ TABLE FEVENTS WITH KEY NAME = 'TOP_OF_PAGE'.
IF SY-SUBRC = 0.
 FEVENTS-FORM = 'Z_TOPOFPAGE'.
 MODIFY FEVENTS INDEX SY-TABIX.
 CLEAR FEVENTS.
ENDIF.
READ TABLE FEVENTS WITH KEY NAME = 'USER_COMMAND'.
IF SY-SUBRC = 0.
 FEVENTS-FORM = 'Z_USER_COMMAND'.
 MODIFY FEVENTS INDEX SY-TABIX.
 CLEAR FEVENTS.
ENDIF.
ENDFORM. "Z_ALV_EVENTS
*& Form Z_CREATE_FIELD_CATALOG
here the field catalog is created for the primary list *
no formal parameters *
FORM Z_CREATE_FIELD_CATALOG.
for the Plant
FCAT-FIELDNAME = 'WERKS'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000005'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Plant'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Type
FCAT-FIELDNAME = 'MTART'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '000006'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MatTyp'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material No.
FCAT-FIELDNAME = 'MATNR'.
FCAT-KEY = 'X'.
fcat-hotspot = 'X'.
FCAT-OUTPUTLEN = '000018'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Material'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Material Description
FCAT-FIELDNAME = 'MAKTX'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '000040'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Description'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Unit of Measure
FCAT-FIELDNAME = 'MEINS'.
FCAT-KEY = ''.
FCAT-OUTPUTLEN = '03'.
FCAT-JUST = 'C'.
FCAT-SELTEXT_M = 'UOM'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'UNIT'.
APPEND FCAT.
CLEAR FCAT.
for the Plant
FCAT-FIELDNAME = 'MONTH'.
FCAT-KEY = 'X'.
FCAT-OUTPUTLEN = '08'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'MONTH'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'C'.
FCAT-DATATYPE = 'CHAR'.
APPEND FCAT.
CLEAR FCAT.
for the Opening Stock
FCAT-FIELDNAME = 'C_STK'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Opening Stock'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
fcat-do_sum = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Total Receipts
FCAT-FIELDNAME = 'TRECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Receipts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Production
FCAT-FIELDNAME = 'PRODU'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Production'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
for the Other Plant Receipts
FCAT-FIELDNAME = 'RECEP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Othr Plnt Recpts'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Sales Return
FCAT-FIELDNAME = 'SAL_RET'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Sales Return'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.
CLEAR FCAT.
Total Dispatches
FCAT-FIELDNAME = 'TDISP'.
FCAT-HOTSPOT = ' '.
FCAT-OUTPUTLEN = '000016'.
FCAT-JUST = 'L'.
FCAT-SELTEXT_M = 'Total Dispatches'.
FCAT-DDICTXT = 'M'.
FCAT-INTTYPE = 'Q'.
FCAT-DATATYPE = 'QUAN'.
FCAT-DO_SUM = 'X'.
FCAT-JUST = 'R'.
FCAT-NO_ZERO = 'X'.
APPEND FCAT.

Issue in ALV Report

Hi,
I have a issue in ALV Report for displaying one field's data into output.
I am getting data into all other fields in ALV Report except for this field.
This field & related fields are declared as below: in final internal table.
sta_no     TYPE z3status,
status(10) TYPE c,
Here z3status is of type Char(1).
In Report
I have put a condition :
IF i_tab-sta_no EQ 1.
   i_tab-status = 'Created'.
ELSE.
   i_tab-status = 'Closed'.
ENDIF.
and to field catalog also i am passing right information as for every other field in ALV Report.
Till the point use of REUSE_ALV_LIST_DISPLAY F.M also final internal table is having status field filled.
But in output nothing gets displayed for Status field.
Can anybody tell me what can be the issue!
Thanks in advance.
Thanks,
Deep.

Hi,
I have no problem in data fetching into final internal table.
Everything is coming well to REUSE_ALV_DISPLAY F.M.
But still Status field data is not getting displayed.
I have posted some code for reference:
        LOOP AT t_z3manboxid INTO wa_z3manboxid.
          wa_result-manifest_no     = wa_z3manboxid-zmanno.
          wa_result-item_no         = wa_z3manboxid-item_no.
          IF l_item_no NE wa_z3manboxid-item_no.
            wa_result-piece_quantity = wa_z3manboxid-vemng.
            wa_result-unit            = wa_z3manboxid-vemeh.
            wa_result-manifester      = wa_z3manboxid-usnam.
            wa_result-manifest_sta_no = wa_z3manboxid-z3status.
            IF wa_result-manifest_sta_no EQ 1.
              wa_result-manifest_status = c_created.
            ELSEIF wa_result-manifest_sta_no EQ 2.
              wa_result-manifest_status = c_in_transit.
            ELSEIF wa_result-manifest_sta_no EQ 3.
              wa_result-manifest_status = c_arrived.
            ELSEIF wa_result-manifest_sta_no EQ 4.
              wa_result-manifest_status = c_closed.
            ENDIF.
          ENDIF.
          l_item_no = wa_z3manboxid-item_no.
          APPEND wa_result TO t_result.
          CLEAR: wa_result, wa_z3manboxid.
        ENDLOOP.
Building field catalog following code is added:
For status call is as below:
PERFORM f_build_fieldcat USING c_tab
                                  c_manifest_status
                                  c_space
                                  c_space
                                  c_mannf_status
                                  c_space1
                                  15.
FORM f_build_fieldcat USING p_tabname p_fldname
                            p_rtabname p_rfldname
                            p_fldhdg p_check
                            p_length.
CLEAR t_fieldcat_ln1.
ADD 1 TO g_col_pos.
t_fieldcat_ln1-tabname       = p_tabname.
t_fieldcat_ln1-fieldname     = p_fldname.
t_fieldcat_ln1-ref_tabname   = p_rtabname.
t_fieldcat_ln1-ref_fieldname = p_rfldname.
t_fieldcat_ln1-ddictxt       = c_l.
t_fieldcat_ln1-seltext_l     = p_fldhdg.
t_fieldcat_ln1-no_zero       = space.
t_fieldcat_ln1-do_sum        = space.
t_fieldcat_ln1-col_pos       = g_col_pos.
t_fieldcat_ln1-no_out        = space.
t_fieldcat_ln1-just          = c_c.
t_fieldcat_ln1-qfieldname    = space.
t_fieldcat_ln1-checkbox      = p_check.
t_fieldcat_ln1-input         = p_check.
t_fieldcat_ln1-reptext_ddic = p_fldhdg.
IF p_fldname EQ c_manno.
    t_fieldcat_ln1-key     = c_x.
    t_fieldcat_ln1-hotspot = c_x.
ELSE.
    t_fieldcat_ln1-key     = space.
    t_fieldcat_ln1-hotspot = p_check.
ENDIF.
t_fieldcat_ln1-outputlen      = p_length.
t_fieldcat_ln1-intlen         = p_length.
t_fieldcat_ln1-ddic_outputlen = p_length.
APPEND t_fieldcat_ln1 TO t_fieldcat1.
ENDFORM.                    " f_build_fieldcat
FORM f_build_sortcat USING p_fldname.
CLEAR t_sortcat_ln1.
ADD 1 TO g_col_pos.
t_sortcat_ln1-spos      = g_col_pos.
t_sortcat_ln1-fieldname = p_fldname.
t_sortcat_ln1-up        = c_x.
t_sortcat_ln1-down      = space.
t_sortcat_ln1-subtot    = c_x.
APPEND t_sortcat_ln1 TO t_sortcat1.
ENDFORM.                    " f_build_sortcat
FORM f_build_layout.
t_layout1-zebra           = c_x.
t_layout1-no_vline        = c_space1.
t_layout1-reprep          = c_x.
t_layout1-detail_popup    = c_x.
t_layout1-window_titlebar = text-005.
t_layout1-no_scrolling    = c_space1.
t_layout1-detail_titlebar = text-005.
t_layout1-numc_sum        = c_x.
t_layout1-get_selinfos    = c_x.
t_layout1-min_linesize    = 132.
ENDFORM.                    " f_build_layout
DATA: l_pgm TYPE syrepid,
        l_exit(1) TYPE c.
CLEAR: l_pgm,
         l_exit.
l_pgm = sy-repid.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
       EXPORTING
            i_callback_program      = l_pgm
            i_callback_user_command = c_user_command
            is_layout               = t_layout1
            it_fieldcat             = t_fieldcat1
            i_save                  = c_a
            it_events               = t_eventcat1
       IMPORTING
            e_exit_caused_by_caller = l_exit
       TABLES
            t_outtab                = t_result
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
IF sy-subrc NE 0.
    l_exit = l_exit.
ENDIF.
To ALV F.M t_result table is updated with correct data.
But it is not getting displayed.
What can be the reason!
Can anybody give the solution!
Thanks for your replies.
Thanks,
Deep.

Issue with ALV grid print preview/spool

Hello everyone,
I am working on a report and I am having some issues with ALV grid. Currently in our DEV and QA environments the user can run the report, view the ALV grid, and print the grid without any issues.
However this isn't the case in the Prod environment. The user is able to run the report and view the grid without any issues. But when they click print preview or click print, the spool is incorrect. It shows the proper values from the grid, but the first field is reduced in length. Rather than showing a numeric field of length 10 it shows 99999999# or 99999999...
The programs are identical through every environment, including user parameters, formats, and spool settings. I have been told printing grids may have some issues, does anyone have any advice or dealt with this issue before?
I appreciate the help.
Thanks,
C

I was waiting to hear from the functional team on the matter and no one has mentioned any more issues. I am assuming the problem is solved. I just noticed the thread was still un-answered and wanted to give an update.
Thank you for you help Vijay.
Regards
C

Issue in ALV reporting

Dear All,
I have an issue in ALV reporting. Pls look at the follow table.
Duty Post Date Time
jurong 12/06 3.45
jurong 13/06 3.50
jurong 14/06 4.50
In the above table jurong is repeated. I do not want jurong to be repeated but other fields should be present.
Kindly help me solve it.
Regards,
Karthikeyan


Hi Karthik,
Another way of handling this without doing if else comparision is using the SORT functionality.
I am giving an example here:
Sort data in the output based on Duty_Post
CLEAR itab_sort.
itab_sort-fieldname = 'DUTY_POST' . (Replace DUTY_POST with the actual field name used in ur report)
itab_sort-up = c_x.
APPEND itab_sort.
CLEAR itab_sort.
Then while calling the ALV FM: include the ITAB_SORT table also.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_program = w_call_back_pgm
 i_grid_title = w_text
 it_fieldcat = itab_fldcat
 it_sort = itab_sort[]
 is_layout = w_layout
 it_events = itab_events[]
 i_default = 'X'
 i_save = 'A'
 IMPORTING
 e_exit_caused_by_caller = w_exit_by_caller
 es_exit_caused_by_user = w_exit_by_user
 TABLES
 t_outtab = itab_output_gr
 EXCEPTIONS
 program_error = 1
 OTHERS = 2.
This way data would not repeat.
Hope this helps.
Rgds,
HR

Field Catelog Issue for ALV Grid

Hi,
I have generated the ALV Dynamically based on the Date Range entered on the selection screen, now I am able to fill the values into the structure also, here my problem is date is like S858-spbup ( mm/yyyy format), what ever the values I have moved is S858-umwavwr(Currency values), now I want to sub total these values. Since my field catelog is date format that is why it is not doing subtotals.
code is
    gs_fc-seltext_l = date.
    gs_fc-seltext_m = date.
    gs_fc-seltext_s = date.
    gs_fc-ref_fieldname = 'umwavwr'.
    gs_fc-ref_tabname = 'S858'.
    gs_fc-do_sum = 'X'.
    gs_fc-outputlen = 20.
    APPEND gs_fc TO gt_fc.
it is doing subtotal but the issue is in ALV header it is not displaying like date (for example 06/2005),instead it is displaying the name as ref_fieldname text. How to resolve this issue. Please help me.
Thanks & Regards,
Sivaram Kandula

Hi Rich,
Thanks for your speedy reply. But in my case scenario is different.
if i remove the ref_fieldname = date means it is dumping bcz,
output is like this
suppose my input is 06/2005 to 08/2005
CSR   District 06/2005 07/2005 08/2005 totals
xxx   newyork    30.00    3.00   5.00    38.00
xxx   newyork    40.00    5.00   6.00    20.00
xxx              70.00    8.00 11.00    58.00
now I am able to display the output like this, but the problem here is i am unable to subtotal these, bcz my field catelog is date type that is why do_sum is not working, that is why I took ref_feield name as UMWAVWR and S858, it is subtotaling but I am unable to see the header like above, instead it is displaying like
CSR District   invoice:Cost invoice:Cost Invoice:cost tot
so please advise me how to proceed further.
Thanks & Regards,
Sivaram Kandula

Data Displaying issue in ALV report

Hi,
I have made a ALV report, the presetn display layout is as below
it is displaying the material shortage reprot against issued production order
ORDER NO.     Order Qty.     MATERIAL     TOTAL QTY     SHORTAGE QTY
3000000     100     610     100     5
3000000     100     101     200     43
3000000     100     8795     400     400
3000000     100     456     100     67
3000001     50     548     50     33
3000004     62     710     62     3
3000005     15     7895     15     15
3000020     11     456     22     10
now the user requirement is the report should come as per below formate
AT EACH NEW ORDER NUMBER :
****************first display main order no. and order qty.
ORDER NO.     Order Qty
3000000     100
************************then below this display the indiviual material and qty.
MATERIAL     TOTAL QTY          SHORTAGE QTY
     610            100                     5
   101              200     43
8795     400     400
456     100     67
*******again at new order******
ORDER NO.       Order Qty
3000001         50
**********then below display the items
MATERIAL     TOTAL QTY          SHORTAGE QTY
548           50                 33
how to do this is there any output layout with this i can get this formate in LAV report
regards,
zafar

Hi Zafar,
You can populate your internal table as per the requirement.
at new order only.
itab-Order = 3000000 .
itab-Order quantity = 100.
append itab
for all materials for that order
itab-MATERIAL       =   610 .
itab-TOTAL QTY = 100 .
itab-SHORTAGE QTY = 5.
append itab.
Cheers,
Suhail

SUM icon issue in ALV Report

HI all,
I have developed an ALV Report. In the ALV display, i would like to sum see the Sum (Total) of few fields like Qty, Net value etc when i select that particular column and click the 'SUM" icon.
In my Report when i do so, the Program is displaying Runtime Error.
How to resolve this issue?
Any idea?
Regards
Pavan

You must make sure that these columns are defined correctly in the field catalog and in the internal table. For example, make sure that the quantity field is typed as such in the internal table.
data: begin of itab occurs 0,
qty type p decimals 2,
end of itab.
And then in your field catalog, make sure that the DATATYPE is set correctly.
ls_fcat-datatype = 'QUAN'.
Do this may help your situation. Also make sure that the data in these columns is all numeric.
Regards,
Rich Heilman

Summation button in ALV report is giving shortdump

Dear All,
I have developed a ALV report. The report is a simple ALV report (Using REUSE_ALV_GRID_DISPLAY). When I am pressing the summation button at the top, it is giving a shortdump. The reason I have found out is the no. of columns are very large (45 to 50). Can anyone suggest how to handle this situation?
Best wishes,
Atanu

Hi atanu,
then you can use DO_SUM = 'X' (for the field which you want to sum option) in the fieldcat , this will try to sum while display it self.i mean in list display it will show the totals also.
then you need not to explicitly click on SUM button.
Regards
vijay

Layout Issue In ALV Grid

Dear All,
I have made an editable ALV andafter entreing data and successful update it will show another ALV.
The issue is that user has saved different Layouts for the 2 ALV's and made it user specific. But again when the report is executed then the 2 saved layouts are not coming.
The respective layout should come for the 2 ALVs.
Thanks & Regards,
Bharti Jain

Hi, let us try with the following code,
type-pools SLIS.
data : lv_vbeln type vbak-vbeln.
select-options : so_vbeln for lv_vbeln.
initialization.
so_vbeln-low = '4970'.
so_vbeln-high = '4975'.
append so_vbeln.
types : begin of ty_vbak,
         vbeln type vbak-vbeln,
         erdat type vbak-erdat,
         erzet type vbak-erzet,
         ernam type vbak-ernam,
       end of ty_vbak.
data : lt_vbak type standard table of ty_vbak,
       ls_vbak type ty_vbak.
data : ls_variant like DISVARIANT.
data : ls_layo type SLIS_LAYOUT_ALV.
data : lt_fcat type SLIS_T_FIELDCAT_alv.
start-of-selection.
perform getvbak.
if sy-subrc eq 0.
perform displayvbak.
endif.
FORM GETVBAK .
select vbeln erdat erzet ernam from vbak
into table lt_vbak
where vbeln in so_vbeln.
ENDFORM.                    " GETVBAK
FORM DISPLAYVBAK .
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   I_CALLBACK_PROGRAM                = sy-repid
   I_STRUCTURE_NAME                  = 'ZMYVBAk'
   IS_LAYOUT                         = ls_layo
   IT_FIELDCAT                       = lt_fcat[]
   I_SAVE                            = 'X'
   IS_VARIANT                        = ls_variant
TABLES
    T_OUTTAB                          = lt_vbak[].
ENDFORM.                    " DISPLAYVBAK
After execution select the fields which you want to hide and after that goto SETTINGS menu -->Layout --->save it
it will ask the save variant and name .
After that goto layout management and select the variant which you created and execute the alv program
then you can observe the fields will hide .
Thanks & Regards,
Raghunadh . K

Issue with ALV sceen called using BDC in new task and in background mode

Hi Gurus,
Need your expert advice. I am trying to call one transaction (IS AUTO - VELO) which has ALVs on screen. VELO is being called through BDC in NEW TASK in background. So, the new session is a Dialog session and SY-BATCH is initial here.
In two different scenarios, I am getting error at two different places:
a) As I can't call ALV directly, I am using docking container. This is giving issue during 'CREATE OBJECT' -> CONSTRUCTOR for cl_gui_alv_grid -> if offline( ) is initial. (AS SY-BATCH is initial) -> call method me->set_registered_events_internal exporting events = lt_events. -> call method get_registered_events importing events = lt_events. -> IF H_CONTROL IS INITIAL. RAISE CNTL_ERROR. ENDIF.
b) Call to OLE_FLUSH_CALL is happening, which is resulting into dump.
I tried to search SDN and google, but couldn't find the solution. Thanks for your help :).
Regards,
Alok

I'm not sure what is eating up your system resources, but .wmv files
are considered to be a delivery format, and are not ideal for editing.
I have never tried to edit screen capture video from any source, but you might consider
upgrading to Expression Encoder 4 Pro (with codecs)... at least it includes H.264.
Expression Encoder 4 Pro

Filter Issue in ALV Grid

I am displaying the table in ALV Grid format. I have 4 fields in the table. The filter works for the first 3 fields, but doesnot work for the last field.
Please let me know what might be the issue.
Find the table declaration and the table population as in the below code
TYPES : BEGIN OF ty_message,
          avm_nr TYPE avm_nr,
          motiv   TYPE motiv_nr,
          text    TYPE t100-text,
          msg     TYPE merep_orderstat,
        END OF ty_message.
DATA: gt_message TYPE STANDARD TABLE OF ty_message,
          gs_message TYPE ty_message.
    gs_message-avm_nr   = gs_upload-avm_nr.
    gs_message-motiv      = gs_upload-motiv.
    gs_message-text        = 'Order Successfully Changed'.
    gs_message-msg       = 'Success'.
    APPEND gs_message TO gt_message.
    CLEAR gs_message.
Regards,
Salil

Since the field MSG refer to MEREP_ORDERSTAT which is CHAR10, it will convert the content to UpperCase.
So, try like:
    gs_message-avm_nr   = gs_upload-avm_nr.
    gs_message-motiv      = gs_upload-motiv.
    gs_message-text        = 'Order Successfully Changed'.
    gs_message-msg       = 'SUCCESS'.
    APPEND gs_message TO gt_message.
    CLEAR gs_message.
Regards,
Naimesh Patel

Issue with ALV output in production

Hi ,
Iam using REUSE_ALV_GRID_DISPLAY function module to display the alv output.
But the ALV is not displaying the data in production, where as it is working fine in Development and Quality.
I have checked the version there is no change.
Please advice how to fix this issue?

I have checked all the Transport request for this particular report,
Even i did the Version management .
I didnt find any change in the versiopn management.
We didnt miss any Transport related to this Report.
Please see my coding for the same.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 I_CALLBACK_PROGRAM = V_REPID
 I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
 IS_LAYOUT = V_ALV_LAYOUT
 IT_FIELDCAT = V_ALV_FIELDCAT
 I_DEFAULT = C_X
 I_SAVE = 'A'
 IT_EVENTS = V_ALV_EVENTS
 TABLES
 T_OUTTAB = IT_FINAL[]
 EXCEPTIONS
 PROGRAM_ERROR = 1
 OTHERS = 2 .
IF SY-SUBRC <> 0.
Edited by: vinay raj on Nov 23, 2010 11:34 AM

Wda date picker issue in alv table

Hi,
When I use a date picker in a alv table in wda I have got the following issue:
Select a date, do not press enter and then press a search help in another field in the table. You can test this in web dynpro 'SALV_WD_DEMO_TABLE_F4'.
When you do this you will see that when pressing a search help like the one of 'currency' the date that you previously selected is gone. Also since on_data_check is not triggered in this scenario I am not sure how to solve this. My guess is that it is a bug. Maybe it can be resolved with an on_click event. That way I can update the date field when a select the currency field (before pressing f4 in the currency field)
Does anybody know if this is the best way to solve this?
Regards,
Raymond Does

Hi Raymond,
What you mentions is Correct and What your are doing is correct. It is bug in WD ALV. It's not checking the value after you given correct value.
Thanks and Regards,
Vijay

Wild character issue in ALV

Dear Guru I have encountered a very peculier issue.
I am trying to take the output of character '@D', '@e', '@4' in alv grid display using
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND'
      i_structure_name         = struct_name
    TABLES
      t_outtab                 = proposal
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
For all the above mentioned character it is showing output like (X) --- a circle with cross mark.
but while other lettr like '#1' or '#2' or '#D' or '1@' or 'b@'are coming properly in the output.
so guru please guide me what might be the possible reason to come like this & how to print in exact '@1' or '@A' format....
spl note if i am using 'REUSE_ALV_LIST_DISPLAY' it is showing properly.
please help.
thanks & regards
Saifur Rahaman

Dear Guru I have encountered a very peculier issue.
I am trying to take the output of character '@D', '@e', '@4' in alv grid display using
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program       = sy-repid
      i_callback_pf_status_set = 'SET_PF_STATUS'
      i_callback_user_command = 'USER_COMMAND'
      i_structure_name         = struct_name
    TABLES
      t_outtab                 = proposal
    EXCEPTIONS
      program_error            = 1
      OTHERS                   = 2.
For all the above mentioned character it is showing output like (X) --- a circle with cross mark.
but while other lettr like '#1' or '#2' or '#D' or '1@' or 'b@'are coming properly in the output.
so guru please guide me what might be the possible reason to come like this & how to print in exact '@1' or '@A' format....
spl note if i am using 'REUSE_ALV_LIST_DISPLAY' it is showing properly.
please help.
thanks & regards
Saifur Rahaman

Summation issue in ALV

Similar Messages

Maybe you are looking for