Sun Cluster 3.0 and VxVM 3.2 problems at boot

i 've a little problem with a two node cluster (2 x 480r + 2 x 3310 with a single raid ctl.)
Every 3310 has 3 (raid5) luns .
I've mirrored these 3 luns with VxVM, and i've mirror also the 2 internal (o.s.) disks.
One of the disk of the first 3310 is the quorum disk.
Every time i boot the nodes , i read an error at "block 0" of the quorum disk and then starts a fastidious synchronization of the mirrors. (sometimes also of the os mirror..)
Why does it happen?
Thanks.
Regards,
Mauro.

We did another test today and again the resource group went into a STOP_FAILED state. On this occasion, the export for the corresponding ZFS pool timed-out. We were able to successfully bring the resource group online on the desired cluster node. Subsequent failovers worked fine. There's something strange happening when the zpool is being exported (eg error correction?). Once the zpool is exported, further imports of it seem to work fine.
When we first had the problem, we were able to manually export and import the zpools, though they did take quite some time to export/import.
"zpool list" shows we have a total of 7 zpools.
"zfs list" shows we have a total of 27 zfs file systems.
Is there any specific Sun or otherwise links to any problems with Sun Cluster and ZFS?

Similar Messages

  • Failover Zones / Containers with Sun Cluster Geographic Edition and AVS

    Hi everyone,
    Is the following solution supported/certified by Oracle/Sun? I did find some docs saying it is but cannot find concrete technical information yet...
    * Two sites with a 2-node cluster in each site
    * 2x Failover containers/zones that are part of the two protection groups (1x group for SAP, other group for 3rd party application)
    * Sun Cluster 3.2 and Geographic Edition 3.2 with Availability Suite for SYNC/ASYNC replication over TCP/IP between the two sites
    The Zones and their application need to be able to failover between the two sites.
    Thanks!
    Wim Olivier

    Fritz,
    Obviously, my colleagues and I, in the Geo Cluster group build and test Geo clusters all the time :-)
    We have certainly built and tested Oracle (non-RAC) configurations on AVS. One issue you do have, unfortunately, is that of zones plus AVS (see my Blueprint for more details http://wikis.sun.com/display/BluePrints/Using+Solaris+Cluster+and+Sun+Cluster+Geographic+Edition). Consequently, you can't built the configuration you described. The alternative is to sacrifice zones for now and wait for the fixes to RG affinities (no idea on the schedule for this feature) or find another way to do this - probably hand crafted.
    If you follow the OHAC pages (http://www.opensolaris.org/os/community/ha-clusters/) and look at the endorsed projects you'll see that there is a Script Based Plug-in on the way (for OHACGE) that I'm writing. So, if you are interested in playing with OHACGE source or the SCXGE binaries, you might see that appear at some point. Of course, these aren't supported solutions though.
    Regards,
    Tim
    ---

  • Dependency between Sun Cluster 2.2 and Sun hardware ?

    I am evaluating Sun Cluster 2.2 for the usage as clustering software within our project.
    Can anybody say me, if there is a dependency between Sun Cluster 2.2 and Sun hardware ?
    Can I use Sun Cluster 2.2 with other hardware platforms running Sun Solaris 7 and Veritas Volume Manager ?

    I have had this discussion with fellow cluster admins, and we think a port of cluster 2.2 could be done to Intel running Solaris. And here is the BUT, BUT SUN does not support anything except a SPARC based cluster. So currently there is definately a depedancy bewteen the 2.2 software and the hardware.
    Hope this helps
    Heath

  • Sun Cluster: Graph resources and resource groups dependencies

    Hi,
    Is there anything like the scfdot (http://opensolaris.org/os/community/smf/scfdot/) to graph resource dependencies in Sun Cluster?
    Regards,
    Ciro

    Solaris 10 8/07 s10s_u4wos_12b SPARC
    + scha_resource_get -O TYPE -R lh-billapp-rs
    + echo SUNW.LogicalHostname:2
    + [ -z sa-billapp-rs ]
    + NETRS=sa-billapp-rs lh-billapp-rs
    + [ true = true -a ! -z sa-billapp-rs lh-billapp-rs ]
    cluster2dot.ksh[193]: test: syntax error
    + + tr -s \n
    + scha_resource_get -O RESOURCE_DEPENDENCIES -R sa-billapp-rs
    DEP=
    + [ true = true -a ! -z sa-billapp-rs lh-billapp-rs ]
    cluster2dot.ksh[193]: test: syntax error
    + + tr -s \n
    + scha_resource_get -O RESOURCE_DEPENDENCIES -R lh-billapp-rs
    DEP=
    + [   !=   ]
    + echo \t\t"lh-billapp-rs";
    + 1>> /tmp/clu-dom3-resources.dot
    + + tr -s \n
    + scha_resource_get -O RESOURCE_DEPENDENCIES_WEAK -R lh-billapp-rs
    DEP_WEAK=

  • Information about Sun Cluster 3.1 5Q4 and Storage Foundation 4.1

    Hi,
    I have 2 Sunfire V440 with Solaris 9 last release 9/05 with last cluster patchs.. , Qlogic HBA fibre card on a seven disks shared on a Emc Clariion cx500. I have installed and configured Sun cluster 3.1 and Veritas Storage Foundation 4.1 MP1. My problems is when i run format wcommand on each node, I see the disks in a different order and veritas SF (4.1) is also picking up the disks in a different order.
    1. Storage Foundation 4.1 is compatible with Sun cluster 3.1 2005Q4?????
    2. Do you have a how to or other procedure for Storage foundation 4.1 with Sun Cluster 3.1.
    I'm very confuse with veritas Storage foundation
    Thanks!
    J-F Aubin

    This combination does not work today, but it will be available later.
    Since Sun and Veritas are two separate companies, it takes more
    time than expected to synchronize releases. Products supported by
    Sun for Sun Cluster installation undergo extensive testing, which also
    takes time.
    -- richard

  • SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)

    Dear All;
    i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
    SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
    for the SAP i did the following configurations
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
    # clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
    and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
    it executes the startsap scripts successfully as following
    Sun Microsystems Inc.     SunOS 5.10     Generic     January 2005
    stty: : No such device or address
    stty: : No such device or address
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    Starting SAP-Collector Daemon
    11:04:57 04.06.2008 LOG: Effective User Id is root
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    * This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
    * Usage: saposcol -l: Start OS Collector
    * saposcol -k: Stop OS Collector
    * saposcol -d: OS Collector Dialog Mode
    * saposcol -s: OS Collector Status
    * Starting collector (create new process)
    saposcol on host eccprd01 started
    Starting SAP Instance ASCS00
    Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
    saposcol on host eccprd01 started
    Running /usr/sap/PRD/SYS/exe/run/startj2eedb
    Trying to start PRD database ...
    Log file: /export/home/prdadm/startdb.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    /usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
    Starting SAP Instance SCS01
    Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
    Instance Service on host eccprd01 started
    Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
    Instance on host eccprd01 started
    Instance on host eccprd01 started
    and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
    Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:28 eccprd01 last message repeated 1 time
    Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:46 eccprd01 last message repeated 1 time
    Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:49 eccprd01 last message repeated 1 time
    Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:52 eccprd01 last message repeated 1 time
    Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:26:58 eccprd01 last message repeated 1 time
    Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:01 eccprd01 last message repeated 1 time
    Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:04 eccprd01 last message repeated 1 time
    Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:13 eccprd01 last message repeated 1 time
    Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:16 eccprd01 last message repeated 1 time
    Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:22 eccprd01 last message repeated 1 time
    Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:25 eccprd01 last message repeated 1 time
    Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:34 eccprd01 last message repeated 1 time
    Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:37 eccprd01 last message repeated 1 time
    Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:43 eccprd01 last message repeated 1 time
    Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
    Jun 4 12:27:46 eccprd01 last message repeated 1 time
    Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
    can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
    ARSSES

    Hi all.
    I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
    Scenrio:
    Central Instance (not incluster) : Started on one node
    Dialog Instance (not in cluster): Started on the other node
    When I create the resource for SUNW.sap_as like
    clrs create --g sap-rg -t SUNW.sap_as .....etc etc
    in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
    Then after timeout it gives up.
    Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
    TIA

  • Shared Tuxedo 8.0 Binaries on a SUN Cluster 3.0

    I know pefectly well that in every installation document BEA strongly advise not to
    try to share executables across remote file systems (NFS etc.) Still i need to ask
    if one of you have any experience in a setup of a SUN 8 / SUN cluster 3.0 enviroment,
    where 2 or more nodes shares disks by the same SUN 3 cluster. The basic idea is to
    have the the Tux8 binaries installed only once, and then separate all the "dynamic"
    files tmconfig, tlogdevices etc in to its own respective katalog (/node1, /node2
    etc.) But stil they remain on the clusterd disks.
    Thank you for a quick response.
    Best of regards
    Raoul

    We have the same problem with 2 SUN E420 and a D1000 storage array.
    The problem is releted to the settings on the file :
    /etc/system
    added by the cluster installation :
    set rpcmod:svc_default_stksize=0x4000
    set ge:ge_intr_mode=0x833
    the second one line try to set a Gigabit Ethernet Interface that does not exist.
    We comment out the two line and every things work fine.
    I'm interesting to know what you think about Sun Cluster 3.0. and your experience.
    email : [email protected]
    Stefano

  • Sun cluster Node ID Order

    I installed Sun cluster 3.1 and it all seemed successful. However, the node ID and the private hostnames seemed twisted. "comdb1" has the node ID of 2 and "comdb2" has the node ID of 1. I installed the software from "comdb1", so it should have used that as node 1, right? I pasted below some info from 'scconf -p'
    Cluster node name: comdb1
    Node ID: 2
    Node enabled: yes
    Node private hostname: clusternode2-priv
    Node quorum vote count: 1
    Node reservation key: 0x4472697D00000002
    Node transport adapters: ce4 ce1
    Cluster node name: comdb2
    Node ID: 1
    Node enabled: yes
    Node private hostname: clusternode1-priv
    Node quorum vote count: 1
    Node reservation key: 0x4472697D00000001
    Node transport adapters: ce4 ce1
    Thank you in advance.

    Consequently, when installing Oracle 10g RAC, the database name "db1" is created on node2 and "db2" is created on node1 since it relies on the private node name and the node ID. Otherwise I wouldn't bother with how the cluster software names its node ID.
    Thanks again,
    Luke

  • SAP Netweaver 7.0 Web Dispatcher HA Setup with Sun Cluster 3.2

    Hi,
    How to HA SAP web dispatcher, which is not mentioned in the guide 'Sun Cluster Data Service for SAP Web Application Server Guide for Solaris OS'.
    Since I do not want to install central instance within the cluster, should I install two standalone web dispatcers within the two nodes, and then HA it? Or maybe just install it on the shared storage with CFS once?
    And specifically, what kind of resource type should I use for it? SUNW.sapwebas?
    Thanks in advance,
    Stephen

    Hi all.
    I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
    Scenrio:
    Central Instance (not incluster) : Started on one node
    Dialog Instance (not in cluster): Started on the other node
    When I create the resource for SUNW.sap_as like
    clrs create --g sap-rg -t SUNW.sap_as .....etc etc
    in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
    Then after timeout it gives up.
    Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
    TIA

  • Sun Cluster 3.2 + Apache Web Server (Apache HA)

    Hi All,
    I am trying to setup an HA Apache Cluster with Sun Cluster 3.2 and Apache Version 2.2.15.
    i have faced a problem saying unable to create resource group
    clresource: (C273000) apache-web.nntele.net-rs: Invalid resource name
    clresource: (C891200) Failed to create resource "apache-web.nntele.net-rs".
    i run the follwing commands:
    /usr/cluster/bin/clresourcegroup create -p nodelist=node2.nntele.net,node1.nntele.net apache-server-rg
    /usr/cluster/bin/clresource create -t SUNW.HAStoragePlus:8 -g apache-server-rg -p FilesystemMountPoints=/global/apache global_apache-rs
    /usr/cluster/bin/clresourcegroup online -emM apache-server-rg
    /usr/cluster/lib/ds/apache/configureApache.ksh copyConfiguration node2.nntele.net /global/apache /usr/local/apache2/conf/httpd.conf /usr/local/apache2/htdocs /global/apache/apache-web.nntele.net-rs apache-web.nntele.net-rs
    /usr/cluster/bin/clreslogicalhostname create -g apache-server-rg -h web.nntele.net -N [email protected],[email protected] web-nntele-net-rs
    /usr/cluster/bin/clresource create -t SUNW.apache:4.1 -g apache-server-rg -p Resource_dependencies=global_apache-rs,web-nntele-net-rs -p Port_list=80/tcp -p Bin_dir=/global/apache/apache-web.nntele.net-rs/bin apache-web.nntele.net-rs
    Please Help Me .... Thanks In Advance.

    You can't do it with the agent directly as it stands, as far as I can tell. However, you could do it indirectly by creating a pool and binding that pool to the FX scheduler. You then create a zone and bind the zone to the pool and put the HA Oracle instance in the zone If you do that on both nodes you achieve what you want (I think). I've never tried this, but it would appear to be feasible.
    i.e. your RG list would be:
    node1:zone1,node2:zone2
    Regards,
    Tim
    ---

  • Sun Cluster 3.0 update 1 on Solaris 8 - panics!

    I am building a test system in our lab on admittedly unsupported hardware configurations but the failure wasn't expected to be so dramatic. Setup as follows:
    2x E250 (single processor, 512 MB RAM)
    dual connected to D1000 fully populated 18 Gb HDD
    Solaris 8 6/00 with all latest recommended patches
    Sun Cluster 3.0 update 1 installed with latest patches.
    On first reboot (on either node), the kernel panics with the following:
    panic[cpu0]/thread=3000132c320: segkp_fault: accessing redzone
    This happens straight after the system sets up the network and happens like that everytime and is easily reproduceable. My question is, has anyone successfully used SC3.0 update 1 on Solaris 8 6/00? Any information would be most appreciated.
    -chris.

    We have the same problem with 2 SUN E420 and a D1000 storage array.
    The problem is releted to the settings on the file :
    /etc/system
    added by the cluster installation :
    set rpcmod:svc_default_stksize=0x4000
    set ge:ge_intr_mode=0x833
    the second one line try to set a Gigabit Ethernet Interface that does not exist.
    We comment out the two line and every things work fine.
    I'm interesting to know what you think about Sun Cluster 3.0. and your experience.
    email : [email protected]
    Stefano

  • Cluster Transport Adapter Error - Sun Cluster

    I am installing sun cluster 3.0 and it gives me an error saying:
    failed to add cluster transport adapter - unknown adapter of transport type, trtype=dlpi...
    My network card is syskonnect - interface is skge0.....
    What is wrong....Thanks

    Hi,
    I have a similar problem .
    Get the same error with Sun Cluster 3.0 the card is Phobos quad port.
    Could find a solution to it or had to shell out a few hundred bucks for sun cards ?

  • Sun cluster with vxvm encapsulated rootdisk

    Hi,
    Can I install vxvm and encasulate rootdisk before installing sun cluster?
    Any help is greatly appreciated.
    Thanks.

    Its suggested to install vxvm and encapsulation using the scvxinstall script which is provided with SunCluster.
    This script will do all the job which you have to do manually like reminoring the rootdg etc.

  • Startup and Shutdown HAOracle on Sun Cluster 3.0

    How can I safely shut down Oracle8i on the running Sun Cluster 3.0?
    Best regards, Tomislav

    Once you have the tds-rg offline, try using scsetup to update the state of the VxVM disk groups, then try switching just the disk group back and forward. Once that works, try bring the RG online.
    Tim
    ---

  • RAC 10g on Sun Cluster 3.1 U3 and Interconnect

    Hello,
    I have the following Interconnects on my Sun Cluster:
    ce5: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 6
         inet 1.1.1.1 netmask ffffff80 broadcast 1.1.1.127
         ether 0:3:ba:95:fa:23
    ce5: flags=2008841<UP,RUNNING,MULTICAST,PRIVATE,IPv6> mtu 1500 index 6
         ether 0:3:ba:95:fa:23
         inet6 fe80::203:baff:fe95:fa23/10
    ce0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
         inet 1.1.0.129 netmask ffffff80 broadcast 1.1.0.255
         ether 0:3:ba:95:f9:97
    ce0: flags=2008841<UP,RUNNING,MULTICAST,PRIVATE,IPv6> mtu 1500 index 7
         ether 0:3:ba:95:f9:97
         inet6 fe80::203:baff:fe95:f997/10
    clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 index 8
         inet 1.1.193.1 netmask ffffff00 broadcast 1.1.193.255
         ether 0:0:0:0:0:1
    In the Installation of RAC the routine will ask me which Interface I will use for RAC Interconnect and I do not know if it does not matter which Interface I choose, because I nevertheless in any case I have an SPOF.
    Can anybody help??
    Thank you very much

    Sorry for the late reply, but the interface to pick is the clprivnet0. This load-balances over the available private interconnects under the covers and so does not represent a single point of failure.
    Tim
    ---

Maybe you are looking for

  • Issues in Value Mapping...

    Hi Experts, I have an issue in Value mapping. For 2 to 3 target data  I have assigned same Group ID of source. 1) It is not allowing to segregate based on Group ID in the target area. 2) If I want to change the group Id of one of the assigned target

  • Reaction Time Test

    Hi everybody. I've been tearing my hair out trying to program a Reaction Time Test.  I have been trying to search for topics that were like my program, but these programs were based on lights and on-off functions while mine is based on random number

  • Video conferencing with multi-presenters

    We'd like to have live video conferences using iPads (for people on the road) and home based computers. We'd also like to be able to shift from presenter to presenter easily, including presenters on iPads. Any software ideas? We currently use GoToMee

  • Hoe to read attachments of type MESSAGE/RFC822

    hi, How to read attachments in mails of type MESSAGE/RFC822 this occurs when somebody puts "Forwarded mails" directly as an attachment inside the mail body itself.. guyz ur help for this will be very much helpful.. thanks sriram.B

  • Social media icons not showing in safari

    Hi NEED SOME HELP - HEADACHE - On a simple html site/page only the manually added icons show, none of the java icons display - facebook and twitter just dont appear http://digitalcinemafilms.co.uk/ Is there a special workaround code you have to add j