Sun Cluster & 6130/6140 thru switch with cross-connections not supported?

Hi:
I noticed that the 6140 does not support cross-connecting the 2 controllers to 2 switches for higher availability when using Sun Cluster:
http://docs.sun.com/source/819-7497-10/chapter3.html
Does anyone know why this restriction is there?
Thanks!

Since there was no real answer to the question in this forum, I cross posted this issue to the cluster forum.
See http://forum.java.sun.com/thread.jspa?threadID=5261282&tstart=0 for the full thread.
Basically, the restriction against cross-connections is no longer valid and the documentation should be updated to remove the note.
This is all a good thing, because I had my 6140's wired into my sun cluster environment via the 'cross-connections' method diagramed in figure 3-4. :-)

Similar Messages

WARNING: Any laptop that comes with an *automatic* switching Radeon 6770m does not support OpenGL.

WARNING: HP has falsely advertised their dv6 and dv7 line. Any laptop that comes with an *automatic* switching Radeon 6770m does not support OpenGL and various other software. OpenGL games, Adobe CS Suit, and Design programs such as CAD or MatLab are incompatible with this laptop!

According to this post the 6670m does fully support open GL 4.1
http://forum.notebookreview.com/hp-pavilion-notebooks/583203-dv6t-7-switchable-graphics-76.html#post...
And AMD says it does also
http://www.amd.com/us/products/notebook/graphics/amd-radeon-6000m/amd-radeon-6700m-6600m/Pages/amd-r...

HT201210 How to correct Problems with cross connections

How to correct Problems with cross connections

Nope not a wrg #, its been a call frm my mom, my son and my brothers that show on my ph, numbers that have been programmed in for years. Thanks

Transfer method 'TRFC with PSA' is not supported by the source system.

Hi guys
We are getting the following error when we try to open the transfer rules:
Transfer method 'TRFC with PSA' is not supported by the source system.
And when we run the load we are getting this error message:
An RFC call-up triggered the exception
Our source system check is ok. RFC test is ok from both sides.
Please advice what else can be the solution.
Edited by: sam on Nov 6, 2008 4:51 PM

Did you do Right click on Source system and 'Check' option in RSA1-> Source Systems?
Is this problem after upgrade or something like that?
-Abhijit

Sun cluster 3.20, live upgrade with non-global zones

I have a two node cluster with 4 HA-container resource groups holding 4 non-global zones running Sol 10 8/07 u4 which I would upgrade to sol10 u6 10/8. The root fileystem of the non-global zones is ZFS and on shared SAN disks so that can be failed over.
For the LIve upgrade I need to convert the root ZFS to UFS which should be straight forward.
The tricky stuff is going to be performing a live upgrade on non-global zones as their root fs is on the shared disk. I have a free internal disk on each of thenodes for ABE environments. But when I run the lucreate command is it going put the ABE of the zones on the internal disk as well or can i specifiy the location ABE for non-global zones. Ideally I want this to be shared disk
Any assistance gratefully received

Hi,
I am not sure whether this document:
http://wikis.sun.com/display/BluePrints/Maintaining+Solaris+with+Live+Upgrade+and+Update+On+Attach
has been on the list of docs you found already.
If you click on the download link, it won't work. But if you use the Tools icon on the upper right hand corner and click on attachements, you'll find the document. Its content is solely based on configurations with ZFS as root and zone root, but should have valuable information for other deployments as well.
Regards
Hartmut

Cross cables not supported

hi all,
i had read in lots of documents cross cable is not supported for RAC environment.
My Environment is as follows:
OS : SUN SPARC SOLARIS 5.10
RDBMS : ORACLE 10.2.0 RAC
NODES : 2
SERVERS : V490
STORAGE : 3100
SWITCH : SAN
OS is installed on 2 nodes with 2 public ip, 2 private ip and 2 VIP.
Clusterware Environment:
CRS : /dev/rdsk/c*s5 : 1GB : External Redundancy
Voting Disk : /dev/rdsk/c*s6 : 1GB : External Redundancy.
Actually we are using cross cables for cluster inter connect but oracle is not recommending and supporting too.
1). How to configure ipmp for public and cluster inter connect.
2). What are the required hardware to complete this.
Plz let me know how to do this.
3). What is the actual problem of using cross cables.
Plz let me know answer from the great experts.

Cross Cables doesn't provide high speed data transfer
between the nodes.Huh? Can you explain this?? How can it be possible?
Certainly, Oracle does not support crossover cables, and there are reasons, but I hardly believe it's due to performance.

Windows AD with Kerberos authentication not supported for NW AS JAVA 7.1

The Admin guide for BO 3.1 states that Windows AD with Kerberos authentication is not supported on NetWeaver AS.
Can anybody suggest & confirm on this???

I know we haven't been receiving cases for it, but I think in theory it should work fine. BO doesn't really care what web/app kerberos comes from as the manual authentication uses the java SDK (i.e tomcat 5.5 would use Sun JDK 1.5), and SSO kerberos (vintela) uses 3rd party libraries. It's possible our 3rd party libraries may not support netweaver yet. If I hear anything else I'll post.
Regards,
Tim

How to find table with colum that not support by data pump network_link

Hi Experts,
We try to import a database to new DB by data pump network_link.
as oracle statement, Tables with columns that are object types are not supported in a network export. An ORA-22804 error will be generated and the export will move on to the next table. To work around this restriction, you can manually create the dependent object types within the database from which the export is being run.
My question, how to find these tables with colum that that are object types are not supported in a network export.
We have LOB object and oracle spital SDO_GEOMETRY object type. our database size is about 300G. nornally exp will takes 30 hours.
We try to use data pump with network_link to speed export process.
How do we fix oracle spital users type SDO_GEOMETRY issue during data pump?
our system is 32 bit window 2003 and 10GR2 database.
Thanks
Jim
Edited by: user589812 on Nov 3, 2009 12:59 PM

Hi,
I remember there being issues with sdo_geometry and DataPump. You may want to contact oracle support with this issue.
Dean

My iPod touch 4G suddenly pops up with 'charging is not supported with this accessory' no matter what cord or source I use. It worked fine for months before this. What can I do?

This is crazy!  I love my iPod but it suddenly has a charging issue. Please HELP! I had absolutely no problem charging it for 7 or 8 months. Then last week I started getting an error message every time I try to charge it. I used to be able to charge it through my PC, PS3, wall adapter or car adapter. Now I get this message no matter where I try to charge it or with what cord! It says, 'charging is not supported with this accessory'. It happens after about 3-5 min of charging. Then I have to unplug it and plug it back in to keep charging it!  How or why did this happen and how do I fix it?

If you did not do a reset of your iPod please try that (you will not lose any data)
Reset iPod touch: Press and hold the On/Off button and the Home button at the same time for at least ten seconds, until the Apple logo appears.
If this does not work inspect the opening in your iPod where the cable connects. Look for any debris and clean it (a magnifying glass may be required).

HT204368 I have an IPhone 5 & Bluetooth just keeps searching & doesn't connect to devices I'm trying to pair with. Says "not supported"

Sorry, if I've posted in the incorrect place. First post, please bare with me.
I've been trying to transfer photos from my old Samsung Galaxy Ace & Toshiba laptop via Bluetooth to my iPhone 5.
iPhone but message of "not supported" comes up when pairing. iPhone stays in search mode when trying to discover devices & does nothing.
Thanking you all in advance for your patience, understanding & help.

All you can connect via BT are headsets and keyboards. You cannot connect to your Galaxy or laptop. That's why it says "not supported."

OS Maverick urls with type "smb" not supported

Ok so this worked with the previous version of OSX .. can someone tell me why and what my workaround would be to connect to a Windows volume as I have previously always used smb://
ThNKS

Hi - my laptop came from a predecessor at work - not sure what their original reason for ADmitMac was, and I don't have any experience of Active Directory I'm afraid. Because I didn't know what or why this software was on my machine to begin with, I don't imagine I will need it in future with Mavericks anyway.
As I understand it, ADmitMac is currently incompatible with Mavericks, so not sure if a re-install would work (I don't have the disk or admin account to re-download). Their website says "The current version of ADmitMac, v7, is NOT compatible with Mavericks and will not function after upgrading. Do not upgrade to Mavericks without upgrading or removing ADmitMac. The "Uninstall ADmitMac.app" can be found in the /Library/Application Support/ADmitMac folder.
We are completing final testing of new releases and will be sending notifications when upgrades are available.
...I couldn't find anything relating to v6 but guessing that is also incompatible as Mavericks connect to server is now working fine for me following the uninstall.
One thing i would add to anyone who might be stuck at this stage as I was - is that to find the uninstall app, I had to find the correct library folder.

Cark 91 with CA55 - Charger Not Supported with Nok...

OK, for all you out there help/suggestions are required.
I have a cark 91 car kit and used the ca55 cable to enable this for pop port operation with my nokia 6280. I upgraded the black module box so that it would charge my phone whislt driving, so everything was hunky dory. However, I recently got a new nokia 6288, and when placing this in the car charger, after about 10-15 seconds of charging, I get an error message stating charger not supported. It then stops charging.
It is odd in that the car kit chargers the old 6280, and the same charger that charges the 6280, also charges the new 6288 ok.
I am at a bit of a loss. Any suggestions, other than getting a new car kit?

Hi, I have a 6131 which was working just fine for a year, then last sunday I connected it to a USB-based charging plug. Since, it has given the message "Charger not supported" when ever connected to a charger. Any charger. And, unfortunately, the battery is not charged completely due to this, hence I am unable to use the phone for any extended period of time. A rather rare problem, I was still hoping Nokia had published som info about this kind of situation.

Why having problems with the sim, not supported carrier?

My provider Orange UK has allowed me to unlock my iphone and has send to me all the steps. WHen trying to unlock my iphone, it gives me this message error
" The SIM card that you currently have installed in this iphone is from a carrier that is not supported under the activation policy that is currently assigned by the activation server. This is not a hardware issue with the iphone. Please insert another SIM card from a supported carrier or request that this iphone be unlocked by your carrier. Please contact Apple for more information"
I bought a non Orange 3G sim card as they mentioned and there is this message. Anyone can help me to unlock my iphone?
THanks!

Have you followed all the steps for unlocking your iPhone, as listed here?
http://support.apple.com/kb/HT5014
If so, did you get the "your iPhone has now been unlocked" message after you restored the iPhone?

Cisco 4500 Chessis Switch with sup 7l-e supports VSS for long distance upto 40 Km

Hello Team,
hope you will find this massage in good health and spirit.
As per my understanding, Cisco 4507R+E with Sup-7L-E will supports VSS for long distance upto 40 Km, i have a scenario that there are two Data Centre of a Company at different graphical location (distance is 2 Km), both have separate network devices but distributed servers connectivity and all servers accessed from both location (some servers are placed in location 1 and some servers are at location 2), both location has separate ISPs link with segregation of internet connectivity (some users using internet from ISP-1 and other are using ISP-2), Core Switches of both location connected to each other via fiber (company fiber not ISP), at this moment Core Switches are configured with multi-group HSRP and next upgrade to VSS.
My concern is if Virtual Switch link (VSL) goes down (which will configure on company fiber link) what is the behavior of Switches, both are in Master mode and working standalone or behavior are different, please confirm and suggest for better.
Regards,
Ammar Ud-Din

does anyone reply me on this......

Can I use Time Capsule 1TB as an external hard drive tos tore my music library(but with cable connection,not WI-FI)

Can I use my Time Capsule 1TB as an external hard drive to store my music library but with a cable connection(Ethernet or USB) and not Wi-Fi.

Yes, with the following warnings.
1. A 1TB TC is a Gen3 or earlier and can die at a moments notice.. So backup is essential.
2. A Gen1 or 2 is slow.. even over ethernet they were processor bound and so transfer speeds are not great.. a USB2 plugged into the computer will be faster. Gen3 is about 50% better as the processor was upgraded by 50% speed.
3. TC has no built in backup.. TM cannot backup network drives.
4. TC is designed to spin up slowly and spin down quickly.. you will have issues with itunes constantly losing the library.
5. You cannot use USB to the TC.. it is a network drive. If you want to use USB directly on the computer buy a USB drive.. but buy as fast a drive as your Mac supports.. Thunderbolt>USB3>FW800>USB2
USB3 is cheap and very good.. but the port is only from 2012 so check your Mac specs.
Thunderbolt whilst being super fantastic and around since 2011, has a bank account clearing price although there are Thunderbolt to esata converters.. for around $160. esata falls between usb3 and fw800.
FW800 from WD is no better than USB2 but other brands it can be twice the speed of usb2.
USB2 is the worst. But still faster than a TC.

Sun Cluster & 6130/6140 thru switch with cross-connections not supported?

Similar Messages

Maybe you are looking for