Sun cluster HPC 5.0 - usage of ssh instead of rlogin
Hi ,
I am working on a sun cluster(HPC 5.0).It has been installedto use rlogin.But I wish to change it to ssh as it ismore secure.So is there a way to do it without uninstalling the cluster and then reinstalling it.
Thank you very much
Varsha
First question is what HBA and driver combination are you using?
Next do you have MPxIO enabled or disabled?
Are you using SAN switches? If so whose, what F/W level and what configuration, (ie. single switch, cascade of multiple switches, etc.)
What are the distances from nodes to storage (include any fabric switches and ISL's if multiple switches) and what media are you using as a transport, (copper, fibre {single mode, multi-mode})?
What is the configuration of your storage ports, (fabric point to point, loop, etc.)? If loop what are the ALPA's for each connection?
The more you leave out of your question the harder it is to offer suggestions.
Feadshipman
Similar Messages
-
SAP 7.0 on SUN Cluster 3.2 (Solaris 10 / SPARC)
Dear All;
i'm installing a two nodes cluster (SUN Cluster 3.2 / Solaris 10 / SPARC), for a HA SAP 7.0 / Oracle 10g DataBase
SAP and Oracle softwares were successfully installed and i could successfully cluster the Oracle DB and it is tested and working fine.
for the SAP i did the following configurations
# clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=01 -p Ci_services_string=SCS -p Ci_startup_script=startsap_01 -p Ci_shutdown_script=stopsap_01 -p resource_dependencies=sap-hastp-rs,ora-db-res sap-ci-scs-res
# clresource create -g sap-ci-res-grp -t SUNW.sap_ci_v2 -p SAPSID=PRD -p Ci_instance_id=00 -p Ci_services_string=ASCS -p Ci_startup_script=startsap_00 -p Ci_shutdown_script=stopsap_00 -p resource_dependencies=sap-hastp-rs,or-db-res sap-ci-Ascs-res
and when trying to bring the sap-ci-res-grp online # clresourcegroup online -M sap-ci-res-grp
it executes the startsap scripts successfully as following
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
stty: : No such device or address
stty: : No such device or address
Starting SAP-Collector Daemon
11:04:57 04.06.2008 LOG: Effective User Id is root
Starting SAP-Collector Daemon
11:04:57 04.06.2008 LOG: Effective User Id is root
* This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
* This is Saposcol Version COLL 20.94 700 - V3.72 64Bit
* Usage: saposcol -l: Start OS Collector
* saposcol -k: Stop OS Collector
* saposcol -d: OS Collector Dialog Mode
* saposcol -s: OS Collector Status
* Starting collector (create new process)
saposcol on host eccprd01 started
Starting SAP Instance ASCS00
Startup-Log is written to /export/home/prdadm/startsap_ASCS00.log
saposcol on host eccprd01 started
Running /usr/sap/PRD/SYS/exe/run/startj2eedb
Trying to start PRD database ...
Log file: /export/home/prdadm/startdb.log
Instance Service on host eccprd01 started
Jun 4 11:05:01 eccprd01 SAPPRD_00[26054]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
/usr/sap/PRD/SYS/exe/run/startj2eedb completed successfully
Starting SAP Instance SCS01
Startup-Log is written to /export/home/prdadm/startsap_SCS01.log
Instance Service on host eccprd01 started
Jun 4 11:05:02 eccprd01 SAPPRD_01[26111]: Unable to open trace file sapstartsrv.log. (Error 11 Resource temporarily unavailable) [ntservsserver.cpp 1863]
Instance on host eccprd01 started
Instance on host eccprd01 started
and the it repeats the following warnings on the /var/adm/messages till it fails to the other node
Jun 4 12:26:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:28 eccprd01 last message repeated 1 time
Jun 4 12:26:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:46 eccprd01 last message repeated 1 time
Jun 4 12:26:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:49 eccprd01 last message repeated 1 time
Jun 4 12:26:49 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:52 eccprd01 last message repeated 1 time
Jun 4 12:26:52 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:55 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:26:58 eccprd01 last message repeated 1 time
Jun 4 12:26:58 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:01 eccprd01 last message repeated 1 time
Jun 4 12:27:01 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:04 eccprd01 last message repeated 1 time
Jun 4 12:27:04 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:07 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:10 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:13 eccprd01 last message repeated 1 time
Jun 4 12:27:13 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:16 eccprd01 last message repeated 1 time
Jun 4 12:27:16 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:19 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:22 eccprd01 last message repeated 1 time
Jun 4 12:27:22 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:25 eccprd01 last message repeated 1 time
Jun 4 12:27:25 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:28 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:31 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:34 eccprd01 last message repeated 1 time
Jun 4 12:27:34 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:37 eccprd01 last message repeated 1 time
Jun 4 12:27:37 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:40 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:43 eccprd01 last message repeated 1 time
Jun 4 12:27:43 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-scs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dispatcher to come up.
Jun 4 12:27:46 eccprd01 last message repeated 1 time
Jun 4 12:27:46 eccprd01 SC[SUNW.sap_ci_v2,sap-ci-res-grp,sap-ci-Ascs-res,sap_ci_svc_start]: [ID 183934 daemon.notice] Waiting for SAP Central Instance main dis
can anyone one help me if there is any error on configurations or what is the cause of this problem.....thanks in advance
ARSSESHi all.
I am having a similar issue with a Sun Cluster 3.2 and SAP 7.0
Scenrio:
Central Instance (not incluster) : Started on one node
Dialog Instance (not in cluster): Started on the other node
When I create the resource for SUNW.sap_as like
clrs create --g sap-rg -t SUNW.sap_as .....etc etc
in the /var/adm/messages I got lots of WAITING FOR DISPACHER TO COME UP....
Then after timeout it gives up.
Any clue? What does is try to connect or waiting for? I hve notest that it's something before the startup script....
TIA -
Wrong hostname setting after Sun Cluster failover
Hi Gurus,
our PI system has been setup to fail over in a sun cluster with a virtual hostname s280m (primary host s280 secondary host s281)
The basis team set up the system profiles to use the virtual hostname, and I did all the steps in SAP Note 1052984 "Process Integration 7.1 High Availability" (my PI is 7.11)
Now I believe to have substituted "s280m" in every spot where previously "s280" existed, but when I start the system on the DR box (s281), the java stack throws erros when starting. Both SCS01 and DVEBMGS00 work directories contain a file called dev_sldregs with the following error:
Mon Apr 04 11:55:22 2011 Parsing XML document.
Mon Apr 04 11:55:22 2011 Supplier Name: BCControlInstance
Mon Apr 04 11:55:22 2011 Supplier Version: 1.0
Mon Apr 04 11:55:22 2011 Supplier Vendor:
Mon Apr 04 11:55:22 2011 CIM Model Version: 1.5.29
Mon Apr 04 11:55:22 2011 Using destination file '/usr/sap/XP1/SYS/global/slddest.cfg'.
Mon Apr 04 11:55:22 2011 Use binary key file '/usr/sap/XP1/SYS/global/slddest.cfg.key' for data decryption
Mon Apr 04 11:55:22 2011 Use encryted destination file '/usr/sap/XP1/SYS/global/slddest.cfg' as data source
Mon Apr 04 11:55:22 2011 HTTP trace: false
Mon Apr 04 11:55:22 2011 Data trace: false
Mon Apr 04 11:55:22 2011 Using destination file '/usr/sap/XP1/SYS/global/slddest.cfg'.
Mon Apr 04 11:55:22 2011 Use binary key file '/usr/sap/XP1/SYS/global/slddest.cfg.key' for data decryption
Mon Apr 04 11:55:22 2011 Use encryted destination file '/usr/sap/XP1/SYS/global/slddest.cfg' as data source
Mon Apr 04 11:55:22 2011 ******************************
Mon Apr 04 11:55:22 2011 *** Start SLD Registration ***
Mon Apr 04 11:55:22 2011 ******************************
Mon Apr 04 11:55:22 2011 HTTP open timeout = 420 sec
Mon Apr 04 11:55:22 2011 HTTP send timeout = 420 sec
Mon Apr 04 11:55:22 2011 HTTP response timeout = 420 sec
Mon Apr 04 11:55:22 2011 Used URL: http://s280:50000/sld/ds
Mon Apr 04 11:55:22 2011 HTTP open status: false - NI RC=0
Mon Apr 04 11:55:22 2011 Failed to open HTTP connection!
Mon Apr 04 11:55:22 2011 ****************************
Mon Apr 04 11:55:22 2011 *** End SLD Registration ***
Mon Apr 04 11:55:22 2011 ****************************
notice it is using the wrong hostname (s280 instead of s280m). Where did I forget to change the hostname? Any ideas?
thanks in advance,
PeterPlease note that the PI system is transparent about the Failover system used.
When you configure the parameters against the mentioned note, this means that in case one of the nodes is down, the load will be sent to another system under the same Web Dispatcher/Load Balancer.
When using the Solaris failover solution, it covers the whole environment, including the web dispatcher, database and all nodes.
Therefore, please check the configuration as per the page below, which talks specifically about the Solaris failover solution for SAP usage:
http://wikis.sun.com/display/SunCluster/InstallingandConfiguringSunClusterHAfor+SAP -
Dependency between Sun Cluster 2.2 and Sun hardware ?
I am evaluating Sun Cluster 2.2 for the usage as clustering software within our project.
Can anybody say me, if there is a dependency between Sun Cluster 2.2 and Sun hardware ?
Can I use Sun Cluster 2.2 with other hardware platforms running Sun Solaris 7 and Veritas Volume Manager ?I have had this discussion with fellow cluster admins, and we think a port of cluster 2.2 could be done to Intel running Solaris. And here is the BUT, BUT SUN does not support anything except a SPARC based cluster. So currently there is definately a depedancy bewteen the 2.2 software and the hardware.
Hope this helps
Heath -
Does sun Cluster 3.0/3.1 HA Oracle agent support to use Oracle spfile?
When defining the resource, the 'parameter_file' properties is usually sets to the Oracle pfile. Is it possible to use Oracle spfile?
It is said if leaving 'parameter_file' NULL, it will be default to Oracle default. Suppose leaving it NULL and with Oracle spfile created in default location, will it use the spfile?You did not specify which Sun Cluster version and Oracle version you are running.
Within SC 3.1 my understanding is that beginning with Oracle 9i it is possible to use the spfile.
If you leave the "parameter_file" property empty (NULL) then the default behaviour for 9i should work:
search under $ORACLE_HOME/dbs in the order:
1. spfile$(ORACLE_SID}.ora
2. spfile.ora
3. init${ORACLE_SID}.ora
Greets
Thorsten -
Hi all,
Need some help from all out there
In our Sun Cluster 3.1 Data Service for Oracle RAC 9.2.0.7 (Solaris 9) configuration, my team had encountered
ora-29701 *Unable to connect to Cluster Manager*
during the startup of the Oracle RAC database instances on the Oracle RAC Server resources.
We tried the attached workaround by Oracle. This workaround works well for the 1^st time but it doesnt work anymore when the server is rebooted.
Kindly help me to check whether anyone encounter the same problem as the above and able to resolve. Thanks.
Bug No. 4262155
Filed 25-MAR-2005 Updated 11-APR-2005
Product Oracle Server - Enterprise Edition Product Version 9.2.0.6.0
Platform Linux x86
Platform Version 2.4.21-9.0.1
Database Version 9.2.0.6.0
Affects Platforms Port-Specific
Severity Severe Loss of Service
Status Not a Bug. To Filer
Base Bug N/A
Fixed in Product Version No Data
Problem statement:
ORA-29701 DURING DATABASE CREATION AFTER APPLYING 9.2.0.6 PATCHSET
*** 03/25/05 07:32 am ***
TAR:
PROBLEM:
Customer applied 9.2.0.6 patchset over 9.2.0.4 patchset.
While creating the database, customer receives following error:
ORA-29701: unable to connect to Cluster Manager
However, if customer goes from 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the problem does not occur.
DIAGNOSTIC ANALYSIS:
It seems that the problem is with libskgxn9.so shared library.
For 9.2.0.4 -> 9.2.0.5 -> 9.2.0.6, the install log shows the following:
installActions2005-03-22_03-44-42PM.log:,
[libskgxn9.so->%ORACLE_HOME%/lib/libskgxn9.so 7933 plats=1=>[46]langs=1=> en,fr,ar,bn,pt_BR,bg,fr_CA,ca,hr,cs,da,nl,ar_EG,en_GB,et,fi,de,el,iw,hu,is,in, it,ja,ko,es,lv,lt,ms,es_MX,no,pl,pt,ro,ru,zh_CN,sk,sl,es_ES,sv,th,zh_TW, tr,uk,vi]]
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]]
For 9.2.0.4 -> 9.2.0.6, install log shows:
installActions2005-03-22_04-13-03PM.log:, [libcmdll.so ->%ORACLE_HOME%/lib/libskgxn9.so 64274 plats=1=>[46] langs=-554696704=>[en]] does not exist.
This means that while patching from 9.2.0.4 -> 9.2.0.5, Installer copies the libcmdll.so library into libskgxn9.so, while patching from 9.2.0.4 -> 9.2.0.6 does not.
ORACM is located in /app/oracle/ORACM which is different than ORACLE_HOME in customer's environment.
WORKAROUND:
Customer is using the following workaround:
cd $ORACLE_HOME/rdbms/lib make -f ins_rdbms.mk rac_on ioracle ipc_udp
RELATED BUGS:
Bug 4169291Check if following MOS note helps.
Series of ORA-7445 Errors After Applying 9.2.0.7.0 Patchset to 9.2.0.6.0 Database (Doc ID 373375.1) -
Creating Logical hostname in sun cluster
Can someone tell me, what exactly logical hostname in sun cluster mean?
For registering logical hostname resource in failoover group, what exactly i need to specify
for example, i have two nodes in sun cluster , How to create or configure a logical hostanme and it should point to which IP Address ( Whether it should point to IP addresses of nodes in sun cluster). Can i get clarification on this?Thanks Thorsten for ur continue help...
The output of clrs status abc_lg
=== Cluster Resources ===
Resource Name Node Name State Status Message
abc_lg node1 Offline Offline
node2 Offline Offline
The status is offline...
the output of clresourcegroup status
=== Cluster Resource Groups ===
Group Name Node Name Suspended Status
abc_rg node1 No Unmanaged
node2 No Unmanaged
You say that the resource should de enabled after creating the resource.. I am using GDS and i am just following the steps he provided to acheive high availabilty (in developers guide...)
I have 1) Logical hostname resorce.
2) Application resource in my failover resource group
When i bring online the failover resource group , what should my failover resource group status and the status of resource in my resource group -
File System Sharing using Sun Cluster 3.1
Hi,
I need help on how to setup and configure the system to share a remote file system that is created on a SAN disk (SAN LUN ) between two Sun Solaris 10 servers.
The files in the remote system should be read/writabe from both the solaris servers concurrently.
As a security policy NFS mount is not allowed. Some one suggested it can be done by using Sun Cluster 3.1 agents on both servers. Any details on how I can do this using Sun Cluster 3.1 is really appreciated.
thanks
SureshYou could do this by installing Sun Cluster on both systems and then creating a global file system on the shared LUN. However, if there was significant write activity on both nodes, then the performance will not necessarily what you need.
What is wrong with the security of NFS? If it is set up properly I don't think this should be a problem.
The other option would be to use shared QFS, but without Sun Cluster.
Regards,
Tim
--- -
Connected to an idle instance in sun cluster nodes.
i have two sun cluster node sharing common storage.
Two schema's:
test1 for nodeA
test2 for nodeB.
My requirement is as below:
Login into b node.
export ORACLE_SID=test1.
sqlplus / as sysdba.
But i am getting as
"connected to an idle instance"
Is there any way to connect to node A schema from Node B.I found the answer..
sqlplus <sysdbauser>/<password>@test1 as sysdba -
RAC 10g on Sun Cluster 3.1 U3 and Interconnect
Hello,
I have the following Interconnects on my Sun Cluster:
ce5: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 6
inet 1.1.1.1 netmask ffffff80 broadcast 1.1.1.127
ether 0:3:ba:95:fa:23
ce5: flags=2008841<UP,RUNNING,MULTICAST,PRIVATE,IPv6> mtu 1500 index 6
ether 0:3:ba:95:fa:23
inet6 fe80::203:baff:fe95:fa23/10
ce0: flags=1008843<UP,BROADCAST,RUNNING,MULTICAST,PRIVATE,IPv4> mtu 1500 index 7
inet 1.1.0.129 netmask ffffff80 broadcast 1.1.0.255
ether 0:3:ba:95:f9:97
ce0: flags=2008841<UP,RUNNING,MULTICAST,PRIVATE,IPv6> mtu 1500 index 7
ether 0:3:ba:95:f9:97
inet6 fe80::203:baff:fe95:f997/10
clprivnet0: flags=1009843<UP,BROADCAST,RUNNING,MULTICAST,MULTI_BCAST,PRIVATE,IPv4> mtu 1500 index 8
inet 1.1.193.1 netmask ffffff00 broadcast 1.1.193.255
ether 0:0:0:0:0:1
In the Installation of RAC the routine will ask me which Interface I will use for RAC Interconnect and I do not know if it does not matter which Interface I choose, because I nevertheless in any case I have an SPOF.
Can anybody help??
Thank you very muchSorry for the late reply, but the interface to pick is the clprivnet0. This load-balances over the available private interconnects under the covers and so does not represent a single point of failure.
Tim
--- -
11g r2 non rac using asm for sun cluster os (two node but non-rac)
I am going to install grid installation for non-rac using asm for two node sun cluster environment..
How to create candidate disk in solaris cluster (sparc os) to install grid home in asm.. please provide me the steps if anyone knowsPlease refer the thread Re: 11GR2 ASM in non-rac node not starting... failing with error ORA-29701
and this doc http://docs.oracle.com/cd/E11882_01/install.112/e24616/presolar.htm#CHDHAAHE -
Sun Cluster with Netapps - iSCSI quorum and network port
I am proposing Sun cluster with Netapps 3020C.
May I know
1) OS is Solaris 9. The SUN OSP says that we need to obtain an iSCSI license from Netapps. Is this the iSCSI initiator software for Solaris 9 to talk to the NAS quorum? Or do I need to purchased a 3rd party iSCSI initiator ?
2) We provide 2 network ports for the Netapps private NAS LAN. Is it a must to cater another dedicated network port for the iSCSI communication with the quorum?
3) If we need purchase a 3rd party iSCSI initiator, where can we get this? I have checked Qlogic and Cisco, they are both not suitable for my solution.
Appreciate your helpHi,
1) OS is Solaris 9. The SUN OSP says that we need to
obtain an iSCSI license from Netapps. Is this the
iSCSI initiator software for Solaris 9 to talk to the
NAS quorum? Or do I need to purchased a 3rd party
iSCSI initiator ?Have a look at http://docs.sun.com/app/docs/doc/817-7957/6mn8834r2?a=view
I read the "Requirements When Configuring NAS Devices as Quorum Devices"
section as this is the license for the iSCSI inititator software.
So you need to enable iSCSI on the netapps box and need to install a package from netapps (NTAPclnas) on the cluster nodes.
2) We provide 2 network ports for the Netapps
private NAS LAN. Is it a must to cater another
dedicated network port for the iSCSI communication
with the quorum?Have a look at http://docs.sun.com/app/docs/doc/819-0580/6n30eahcc?a=view#ch4_quorum-9
I don't read such a requirement there.
3) If we need purchase a 3rd party iSCSI initiator,
where can we get this? I have checked Qlogic and
Cisco, they are both not suitable for my solution.
Appreciate your helpI don't thibk you need such a 3rd party iSCSI initiator, unless this is stated in the above docs.
Greets
Thorsten -
Hello.
Does anybody know, is Contenr Server can work on Sun Cluster?
I did not find any information in notes or PAM. Technically, Sun Cluster support both Apache and MaxDB.HI,
It is supported on sun cluster. You can use Apache 2.052 and MaxDB 7.6
Anirudh, -
Rename Sun Cluster Resource Group
Hi All,
We have a 2 node Sun Cluster 3.0 running on 2 x V440 servers. We want to change the resource group.
Can I use "scrgadm -c -g RG_NAME -h nodelist -y property" command to change the resource group name. Can I do this online while the clusters are running or do I need to bring the cluster to mainenance mode? Any help would be appreciated.
Thanks.You cannot rename a resource group in that way in Sun Cluster.
You have two options:
-Recreate the resource group with the new name
-Use an unsupported procedure to change the name in the CCR. This requires downtime of both nodes and as it is unsupported I am not going to describe it here. If that is what you want to do, please log a call with Sun.
If you think renaming resource groups is a useful feature may I also ask you to contact your Sun Service representative so that they can take proper action to log an RFE for the feature. -
Sun Cluster.. Why?
What are the advantages of installing RAC 10.2.0.3 on a Sun Cluster.? Are there any benefits?
Oracle 10g onward, there is no such burning requirement for Sun Cluster (or any third party cluster) as far as you are using all Oracle technologies for your Oracle RAC database. You should Oracle RAC with ASM for shared storage and that would not require any third party cluster. Bear inmind that
You may need to install Sun Cluster in the following scenarios:
1) If there is applicaiton running with in the cluster along with Oracle RAC database that you want to configure for HA and Sun Cluster provide the cluster resourced (easy to use) to manage and monitor the application. THIS can be achieved with Oracle Clusterware but you will have to write your own cluster resource for that.
2) If you want to install cluster file system such as QFS then you will need to install the Sun Cluster. If this cluster is only running the Oracle RAC database then you can rely on Oracle technologies such as ASM, raw devices without installing Sun Cluster.
3) Any certification conflicts.
Any correction is welcome..
-Harish Kumar Kalra
Maybe you are looking for
-
I am running 10.8.5 on my MBP, and external monitor, keyboard and Magic Mouse. When I have Time Machine on the mouse is a pain to use use as it does not track properly. Is there anyway to have Time MAchine come on after 30 minutes of inactivity or so
-
FTP Sender - Message not reaching XI
Hi, I am using FTP sender adapter to send an XML file to XI. The file is being picked up by XI properly from the Source directory on the FTP server which is running on my local machine but it is not reaching the integration server. SXMB_MONI shows no
-
Can't modify Outbound Connection Pools properties in WebLogic 10.3.6
I'm trying to configure BAM adapter in WebLogic Administration Console. Navigate to deployments -> OracleBamAdapter -> Configuration -> Outbound Connection Pools -> eis/bam/rmi -> tried to enter property value of Hostname but I couldn't. It is not in
-
Custom Infotype - to display the description in query ouput!!
I have created a Custom Infotype and when I run a Infoset Query against the custom infoset, the field is getting displayed but not the description. For Ex ADP Infotype Company Code A11 - America Company Code A12 - Africa
-
Communication C4C- PI SSL Error
Dear Experts, I have a problem to get the outbound communication for C4C with PI running. Every time i'm testing the outbound communication in C4C i get the following error: SOAP Runtime: SRT: Processing error in Internet CommunicationFramework: ("IC