Sun cluster3.1u1 rpc authentication error
I am trying to setup two node sun cluster on two ultra 10s. I have already setup one node and it is online.
when I trty to add another node using scinstall and choosing " add machine to existing cluster" and after
typing machine name and cluster name , i get
rpc authentication error.
This is solaris 9 and sun cluster 3.1 u1 environment.
any one, any clue!!!
thanks
syed
Have you informed the existing node running the cluster that you wish to extend the node list?
If not you'll need to run scsetup on the original first, before attempting to add a new node via scinstall.
Similar Messages
-
RPC: Authentication error while trying to mount a remote cdrom
On my Solaris 10 workstation I configured the following line in /etc/dfs/dfstab:
share -F nfs -o ro,anon=0 /cdrom/cdrom0
and restarted the nfsd.
dfshares says that it is shared: undine:/cdrom/sol_10_606_sparc undine - -
Now when I try to mount it on another Solaris 10 host like this it is not working:
mount -F nfs undine:/cdrom/sol_10_606_sparc /mnt
nfs mount: undine: : RPC: Rpcbind failure - RPC: Authentication error
Both Hosts are JASS hardened. I think there is a service missing.
The following services are available:
root@undine# svcs -a
STATE STIME FMRI
legacy_run Jul_23 lrc:/etc/rc2_d/S00set-tmp-permissions
legacy_run Jul_23 lrc:/etc/rc2_d/S07set-tmp-permissions
legacy_run Jul_23 lrc:/etc/rc2_d/S10lu
legacy_run Jul_23 lrc:/etc/rc2_d/S20sysetup
legacy_run Jul_23 lrc:/etc/rc2_d/S40llc2
legacy_run Jul_23 lrc:/etc/rc2_d/S42ncakmod
legacy_run Jul_23 lrc:/etc/rc2_d/S68net-tune
legacy_run Jul_23 lrc:/etc/rc2_d/S70nddconfig
legacy_run Jul_23 lrc:/etc/rc2_d/S70sckm
legacy_run Jul_23 lrc:/etc/rc2_d/S73cachefs_daemon
legacy_run Jul_23 lrc:/etc/rc2_d/S81dodatadm_udaplt
legacy_run Jul_23 lrc:/etc/rc2_d/S89bdconfig
legacy_run Jul_23 lrc:/etc/rc2_d/S90loc_ja_cssd
legacy_run Jul_23 lrc:/etc/rc2_d/S90webconsole
legacy_run Jul_23 lrc:/etc/rc2_d/S91afbinit
legacy_run Jul_23 lrc:/etc/rc2_d/S91gfbinit
legacy_run Jul_23 lrc:/etc/rc2_d/S91ifbinit
legacy_run Jul_23 lrc:/etc/rc2_d/S91jfbinit
legacy_run Jul_23 lrc:/etc/rc2_d/S91kfbinit
legacy_run Jul_23 lrc:/etc/rc2_d/S91zuluinit
legacy_run Jul_23 lrc:/etc/rc2_d/S94Wnn6
legacy_run Jul_23 lrc:/etc/rc2_d/S94atsv
legacy_run Jul_23 lrc:/etc/rc2_d/S94ncalogd
legacy_run Jul_23 lrc:/etc/rc2_d/S98deallocate
legacy_run Jul_23 lrc:/etc/rc2_d/S99dtlogin
legacy_run Jul_23 lrc:/etc/rc3_d/S16boot_server
legacy_run Jul_23 lrc:/etc/rc3_d/S22acct
legacy_run Jul_23 lrc:/etc/rc3_d/S25openssh_server
legacy_run Jul_23 lrc:/etc/rc3_d/S50apache2
legacy_run Jul_23 lrc:/etc/rc3_d/S52imq
legacy_run Jul_23 lrc:/etc/rc3_d/S73_mysql
legacy_run Jul_23 lrc:/etc/rc3_d/S75seaport
legacy_run Jul_23 lrc:/etc/rc3_d/S81volmgt
legacy_run Jul_23 lrc:/etc/rcS_d/S29wrsmcfg
disabled Jul_23 svc:/network/rpc/metamed:default
disabled Jul_23 svc:/network/rpc/metamh:default
disabled Jul_23 svc:/network/rpc/rstat:default
disabled Jul_23 svc:/network/rpc/spray:default
disabled Jul_23 svc:/network/rpc/wall:default
disabled Jul_23 svc:/network/tname:default
disabled Jul_23 svc:/network/security/ktkt_warn:default
disabled Jul_23 svc:/network/security/krb5_prop:default
disabled Jul_23 svc:/network/telnet:default
disabled Jul_23 svc:/network/apocd/udp:default
disabled Jul_23 svc:/network/uucp:default
disabled Jul_23 svc:/network/chargen:dgram
disabled Jul_23 svc:/network/chargen:stream
disabled Jul_23 svc:/network/daytime:dgram
disabled Jul_23 svc:/network/daytime:stream
disabled Jul_23 svc:/network/discard:dgram
disabled Jul_23 svc:/network/discard:stream
disabled Jul_23 svc:/network/echo:dgram
disabled Jul_23 svc:/network/echo:stream
disabled Jul_23 svc:/network/time:dgram
disabled Jul_23 svc:/network/time:stream
disabled Jul_23 svc:/network/ftp:default
disabled Jul_23 svc:/network/comsat:default
disabled Jul_23 svc:/network/finger:default
disabled Jul_23 svc:/network/login:eklogin
disabled Jul_23 svc:/network/login:klogin
disabled Jul_23 svc:/network/login:rlogin
disabled Jul_23 svc:/network/rexec:default
disabled Jul_23 svc:/network/shell:default
disabled Jul_23 svc:/network/shell:kshell
disabled Jul_23 svc:/network/talk:default
disabled Jul_23 svc:/platform/sun4u/dcs:default
disabled Jul_23 svc:/system/metainit:default
disabled Jul_23 svc:/platform/sun4u/mpxio-upgrade:default
disabled Jul_23 svc:/network/iscsi_initiator:default
disabled Jul_23 svc:/network/rpc/nisplus:default
disabled Jul_23 svc:/network/nis/server:default
disabled Jul_23 svc:/network/dns/client:default
disabled Jul_23 svc:/network/ldap/client:default
disabled Jul_23 svc:/system/auditd:default
disabled Jul_23 svc:/network/inetd-upgrade:default
disabled Jul_23 svc:/application/print/server:default
disabled Jul_23 svc:/platform/sun4u/sf880drd:default
disabled Jul_23 svc:/system/power:default
disabled Jul_23 svc:/network/rpc/bootparams:default
disabled Jul_23 svc:/system/rcap:default
disabled Jul_23 svc:/system/mdmonitor:default
disabled Jul_23 svc:/network/rarp:default
disabled Jul_23 svc:/network/dhcp-server:default
disabled Jul_23 svc:/application/management/webmin:default
disabled Jul_23 svc:/application/print/ipp-listener:default
disabled Jul_23 svc:/application/print/cleanup:default
disabled Jul_23 svc:/application/gdm2-login:default
disabled Jul_23 svc:/network/dns/server:default
disabled Jul_23 svc:/network/security/kadmin:default
disabled Jul_23 svc:/network/security/krb5kdc:default
disabled Jul_23 svc:/network/nis/passwd:default
disabled Jul_23 svc:/network/nis/update:default
disabled Jul_23 svc:/network/nis/xfr:default
disabled Jul_23 svc:/system/sar:default
disabled Jul_23 svc:/network/slp:default
disabled Jul_23 svc:/platform/sun4u/efdaemon:default
disabled Jul_23 svc:/system/consadm:default
disabled Jul_23 svc:/system/cvc:default
disabled Jul_23 svc:/network/rpc/meta:default
disabled Jul_23 svc:/application/x11/xfs:default
disabled Jul_23 svc:/application/font/stfsloader:default
disabled Jul_23 svc:/application/print/rfc1179:default
disabled Jul_23 svc:/network/rpc/ocfserv:default
disabled 16:08:14 svc:/network/nfs/cbd:default
disabled 16:14:03 svc:/network/rpc/rusers:default
disabled 16:14:12 svc:/network/rpc-100068_2-5/rpc_udp:default
disabled 16:14:23 svc:/network/rpc-100083_1/rpc_tcp:default
disabled 16:14:37 svc:/network/rpc-100235_1/rpc_ticotsord:default
disabled 16:14:52 svc:/network/rpc/rex:default
disabled 16:15:12 svc:/network/rpc/mdcomm:default
online Jul_23 svc:/network/ntp:default
online Jul_23 svc:/system/filesystem/autofs:default
online Jul_23 svc:/system/system-log:default
online Jul_23 svc:/system/dumpadm:default
online Jul_23 svc:/network/smtp:sendmail
online Jul_23 svc:/system/fmd:default
online Jul_23 svc:/milestone/multi-user:default
online Jul_23 svc:/milestone/multi-user-server:default
online Jul_23 svc:/system/zones:default
online Jul_23 svc:/system/svc/restarter:default
online Jul_23 svc:/system/installupdates:default
online Jul_23 svc:/network/pfil:default
online Jul_23 svc:/network/loopback:default
online Jul_23 svc:/system/filesystem/root:default
online Jul_23 svc:/system/boot-archive:default
online Jul_23 svc:/system/filesystem/usr:default
online Jul_23 svc:/system/keymap:default
online Jul_23 svc:/network/physical:default
online Jul_23 svc:/system/device/local:default
online Jul_23 svc:/system/identity:node
online Jul_23 svc:/system/filesystem/minimal:default
online Jul_23 svc:/system/rmtmpfiles:default
online Jul_23 svc:/system/sysevent:default
online Jul_23 svc:/system/coreadm:default
online Jul_23 svc:/system/device/fc-fabric:default
online Jul_23 svc:/system/identity:domain
online Jul_23 svc:/system/picl:default
online Jul_23 svc:/milestone/devices:default
online Jul_23 svc:/system/cryptosvc:default
online Jul_23 svc:/network/ipfilter:default
online Jul_23 svc:/milestone/network:default
online Jul_23 svc:/network/initial:default
online Jul_23 svc:/system/manifest-import:default
online Jul_23 svc:/milestone/single-user:default
online Jul_23 svc:/system/filesystem/local:default
online Jul_23 svc:/system/sysidtool:net
online Jul_23 svc:/system/sysidtool:system
online Jul_23 svc:/milestone/sysconfig:default
online Jul_23 svc:/system/sac:default
online Jul_23 svc:/system/utmp:default
online Jul_23 svc:/system/console-login:default
online Jul_23 svc:/application/font/fc-cache:default
online Jul_23 svc:/milestone/name-services:default
online Jul_23 svc:/system/cron:default
online Jul_23 svc:/network/service:default
online 16:16:05 svc:/network/rpc/bind:default
online 16:16:05 svc:/network/nis/client:default
online 16:16:07 svc:/network/nfs/client:default
online 16:16:07 svc:/network/nfs/status:default
online 16:16:08 svc:/network/nfs/nlockmgr:default
online 16:16:08 svc:/network/nfs/mapid:default
online 16:16:08 svc:/network/nfs/server:default
online 16:16:35 svc:/network/rpc/keyserv:default
online 16:32:58 svc:/network/inetd:default
online 16:32:58 svc:/system/name-service-cache:default
online 16:32:58 svc:/network/vopied/tcp:default
online 16:32:58 svc:/network/vnetd/tcp:default
online 16:32:58 svc:/network/bpcd/tcp:default
online 16:32:58 svc:/network/nfs/rquota:default
online 16:32:58 svc:/network/rpc/smserver:default
online 16:32:58 svc:/network/rpc/gss:default
I would be happy for any feedback
Regards RobertThis is because of tcp wrappers configuration:
/etc/hosts.deny
ALL : ALL
commented out that line and restarted inetd -
Scrconf: RPC: Rpcbind failure - RPC: Authentication error
I am trying to setup 2 node cluster (1/09 software).
After setting up the cluster, the commands "scstat -i" and "clnode status -m" returns the bellow error.
scrconf: RPC: Rpcbind failure - RPC: Authentication error
On both nodes, the /etc/hosts.allow file contains bellow entry.
rpcbind: ALL
But i am still receiving the same error.
Any help how can i solve this issue ?
Thank you."The procedure use the root user to create a connexion between the nodes. You must allow access for root. It is recommended to restart some services after modification."
The nodes are configured with SSH without asking password for root user.
Is this not sufficient.
Please explain. Thank you. -
RPC authentication error.,
hi guys.
well really struggling in configuring the CLUSTER ?
i have configure one node in the cluster .
when i on to the other and make it join this cluster the error i have is as follows.
RPC authentication error.
can any one help m e,
REGARDS
ADEEL
Edited by: adeelarifbhatti on Aug 22, 2008 1:29 PMDONE,
use the claccess command for this problem on the other node ,
./claccess hostname -h node.domain.com -
SUN Volume Manager with rpc.metacld error
Solaris 10 (x86) with latest recommend patch cluster ;
SUN cluster 3.1 u4 with patch 120501-10
There is always a rpc.metacld error. How to fix this issue?
bash-3.00# scstat -n
-- Cluster Nodes --
Node name Status
Cluster node: arcsunx42km2545 Online
Cluster node: arcsunx42km0838 Online
bash-3.00# hostname
arcsunx42km0838
bash-3.00# metaset -s new -a -h arcsunx42km2545 arcsunx42km0838
Proxy command to: arcsunx42km2545
rpc.metacld
bash-3.00#
bash-3.00#
bash-3.00# metaset
bash-3.00# metaset -s new -a -h arcsunx42km0838
ERROR: arcsunx42km2545: rpc.metacld 13
bash-3.00# svcs | grep meta
online 4:56:08 svc:/network/rpc/metacld:default
online 17:26:43 svc:/system/metainit:default
online 17:26:44 svc:/network/rpc/meta:default
online 23:31:38 svc:/network/rpc/metamed:default
online 23:31:38 svc:/network/rpc/metamh:default
bash-3.00#
Message was edited by:
skyqaI have the same problem,too.
I fix it by run the command on another node.
but I need to know the actual reason.
who can give me a hand?
thanks in advance! -
Exchange 2010 RPC over HTTPs failing with authentication error
Hi. I have my remote.xxx.co.uk domain and autodiscover.xxx.co.uk domain pointing to my SBS2011 server, have ports 25, 80, 443 open. The Microsoft Connectivity Analyzer fails with the below error.
Outlook will autodiscover happily on the local network, and works fine. Phones etc do too.
Outlook at a remote VPN connected site won't connect through autodiscover, but will if you do it manually (ignoring the RPC Proxy settings). Everything works for a while, but then I guess outlook decides to use autodiscover to complete all the connection
details, and then these machines can no longer connect to exchange as I guess they decide the speed is too slow and try to connect using RPC instead.
Users can access OWA happily, and activesync is working on phones etc.
SSL cert is a wildcard type on my domain, and certs are installed - all green and happy when visiting OWA on both remote.xxxxx.co.uk and autodiscover.xxxxx.co.uk domains.
I cannot work out why I have an authentication error for RPC?
Any advice would be great!
Testing HTTP Authentication Methods for URL https://remote.xxxxx.co.uk/rpc/rpcproxy.dll?xxxxxx.xxxxxx.local:6002.
The HTTP authentication test failed.
Additional Details
Exception details:
Message: The operation has timed out
Type: System.Net.WebException
Stack trace:
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.Tools.ExRca.Extensions.RcaHttpRequest.GetResponse()
Elapsed Time: 100065 msHi.
To update.
I tried to recreate the virtual directories in the Exchange Management Console, using the recreate links and via the shell, but while they were recreated, they did not function as they should due to issues in the meta database.
I then found the following which worked.
Looking at the ActiveSync virtual directories, when running the below command, the result showed the directory was there, so I then knew to delete it.
In EMS I ran,
=> Ran "$site = [ADSI]"IIS://localhost/W3SVC/1/Root/Microsoft-Server-ActiveSync""
Result: Carriage return.
=> Ran "$site"
Result:
distinguishedName:
Path: {C:\Program Files\Microsoft\ExchangeServer\V14\Client Access\Sync}
In EMS I then ran,
=> Ran "$Site = [ADSI]"IIS://localhost/W3SVC/1/Root""
Result: Carriage return.
=> Ran "$site.Delete("IIsWebVirtualDir","Microsoft-Server-ActiveSync")"
Result: Carriage return.
=> Ran "$site.SetInfo()"
Result: Carriage return.
=> Ran "$site"
Result: Carriage return.
=> Ran "iisreset"
I then recreated the virtual directories.
In EMS I ran,
=> Ran "New-ActiveSyncVirtualDirectory -WebSiteName "Default Web Site""
Results: Successfully recreated.
=> Ran "iisreset"
I am not sure exactly, but I did this for multiple virtual directories, and everything came to life just as it should. -
Error in Siebel Analytics ReportUI portlet Authentication error.
Hi Everyone
I am trying to Integrate Between Weblogic Portal and OBIEE.
Weblogic Portal Version: 10.3
OBIEE : 11g
Integration Using: Report UI Portlet
1.
While creating OBIEE environment "weblogic" user was setup as "Administrator" account.
Following is list of users that i see from weblogic console for OBIEE.
User | Group
weblogic | Administrator
BISystemUser| Administrators
OracleSystemUser| OracleSystemGroup
2.
From Portal environment, i have added "sawjsr168portlets.war" as shared library.
Changed portlet.xml and web.xml with following.
-changes in portlet.xml
1. oracle.bi.presentation.sawserver.URL
http://localhost:9704/analytics/saw.dll
2. oracle.bi.presentation.portlets.jsr168.reportui.AdminUserName
weblogic
3. oracle.bi.presentation.portlets.jsr168.reportui.AdminPwd
xxxxxx
4. oracle.bi.presentation.report.Path
/Shared Folders/Sample Lite/Published Reporting/Reports/Brand Revenue Details
-changes in web.xml
1. com.siebel.analytics.web.SAWServer.Host
localhost
2. com.siebel.analytics.web.SAWServer.Port
9704
3. On Portal Desktop, I am authenticating with "weblogic" user ("weblogic" user which is configured in Portal Domain).
While doing so, I see following exception on Portal Domain.
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <<?xml version="1.0" encoding="UTF-8"?><soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:sawsoap="com.siebel.analytics.web/soap/v6"> <soap:Body> <soap:Fault><faultcode>soap:Server</faultcode>
<faultstring>Authentication error. Details: An invalid User Name or Password was entered. </faultstring>
<detail><sawsoape:Error xmlns:sawsoape="com.siebel.analytics.web/soap/error/v1">
<sawsoape:Code>IAI2Z2JJ</sawsoape:Code>
<sawsoape:Message>Authentication error. Details: An invalid User Name or Password was entered. </sawsoape:Message>
<sawsoape:File>main/project/websubsystems/soapservicesimpl.cpp</sawsoape:File>
<sawsoape:Line>183</sawsoape:Line>
<sawsoape:LogSources>
<sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
<sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
<sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
<sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
<sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
<sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
<sawsoape:LogSource>saw.threads</sawsoape:LogSource>
</sawsoape:LogSources><sawsoape:Error>
<sawsoape:Code>IHVF6OM7</sawsoape:Code>
<sawsoape:Message>Authentication Failure.</sawsoape:Message>
<sawsoape:File>main/project/webconnect/connection.cpp</sawsoape:File>
<sawsoape:Line>387</sawsoape:Line>
<sawsoape:LogSources>
<sawsoape:LogSource>saw.connectionPool.getConnection</sawsoape:LogSource>
<sawsoape:LogSource>saw.securitysubsystem.checkauthentication.runimpl</sawsoape:LogSource>
<sawsoape:LogSource>saw.soap.makesession</sawsoape:LogSource>
<sawsoape:LogSource>saw.soap.sessionrequesthandler</sawsoape:LogSource>
<sawsoape:LogSource>saw.SOAP</sawsoape:LogSource>
<sawsoape:LogSource>saw.httpserver.request.soaprequest</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server.responder</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server.handleConnection</sawsoape:LogSource>
<sawsoape:LogSource>saw.rpc.server.dispatch</sawsoape:LogSource>
<sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
<sawsoape:LogSource>saw.threadpool</sawsoape:LogSource>
<sawsoape:LogSource>saw.threads</sawsoape:LogSource>
</sawsoape:LogSources><sawsoape:Error>
<sawsoape:Code>OPR4ONWY</sawsoape:Code>
<sawsoape:Message>Odbc driver returned an error (SQLDriverConnectW).</sawsoape:Message>
<sawsoape:File>main/project/webodbcaccess/odbcconnectionimpl.cpp</sawsoape:File>
<sawsoape:Line>356</sawsoape:Line>
<sawsoape:Error>
<sawsoape:Code>U9IM8TAC</sawsoape:Code>
<sawsoape:Message>State: 08004. Code: 10018. [NQODBC] [SQL_STATE: 08004] [nQSError: 10018] Access for the requested connection is refused.
[nQSError: 43113] Message returned from OBIS.
[nQSError: 13038] The user does not have impersonation privilege. (08004)</sawsoape:Message>
</sawsoape:Error>
</sawsoape:Error>
</sawsoape:Error>
</sawsoape:Error>
</detail>
</soap:Fault></soap:Body> </soap:Envelope>>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(exit00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.transport.http.HTTPSender> <BEA-000000> <Exit: HTTPDispatchHandler::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SimpleChain> <BEA-000000> <Exit: SimpleChain::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(semanticCheck00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.handlers.soap.MustUnderstandChecker> <BEA-000000> <Doing SOAP semantic checks...>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.client.AxisClient> <BEA-000000> <Exit: AxisClient::invoke>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <Enter: SOAPPart::getAsSOAPEnvelope()>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(currForm)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.SOAPPart> <BEA-000000> <current form is FORM_SOAPENVELOPE>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.i18n.ProjectResourceBundle> <BEA-000000> <org.apache.axis.i18n.resource::handleGetObject(toAxisFault00)>
<Jan 3, 2011 11:05:05 AM EST> <Debug> <org.apache.axis.enterprise> <BEA-000000> <Mapping Exception to AxisFault
Authentication error. Details: An invalid User Name or Password was entered.
at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
<Jan 3, 2011 11:05:05 AM EST> <Error> <ServletContext-/research-portal> <BEA-000000> <Error in Siebel Analytics ReportUI portlet
Authentication error. Details: An invalid User Name or Password was entered.
at org.apache.axis.message.SOAPFaultBuilder.createFault(SOAPFaultBuilder.java:221)
at org.apache.axis.message.SOAPFaultBuilder.endElement(SOAPFaultBuilder.java:128)
at org.apache.axis.encoding.DeserializationContext.endElement(DeserializationContext.java:1087)
at org.apache.xerces.parsers.AbstractSAXParser.endElement(Unknown Source)
at org.apache.xerces.impl.XMLNSDocumentScannerImpl.scanEndElement(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl$FragmentContentDispatcher.dispatch(Unknown Source)
at org.apache.xerces.impl.XMLDocumentFragmentScannerImpl.scanDocument(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers.XML11Configuration.parse(Unknown Source)
at org.apache.xerces.parsers
Kindly let me know your thoughts on following.
1. Am i missing any steps?
2. Is it possible that Portal 10.3 and OBIEE 11g is not compatible?
3. Admin Username and password that i specified in Report UI portlet's preferences, is it wrong user (or user from wrong group maybe)? Do i need to specify user who is from another group?
4. I changed "SAWServer" url and port in web.xml. Is that okay?
5. Is there any way, i can get more detailed information from OBIEE Server by enabling certain kind of debug?
Let me know if any input is needed from my side. Any input is highly appreciated.
ThanksHi Now I am facing bellow error.
Can anybody suggest me what to do?
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65PState: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 13017] User or group has not been granted the Direct Database Access privilege to access the database 'sh'. Please verify the User/Group Permissions in the Oracle BI Administration Tool. (HY000) -
Job rejected with "2015 -Authentication errors"
Environment:
Oracle server : Sun Solaris 2.8, Oracle 8.1.5
OEM/Management server: Windows 2000, Oracle 8.1.6
Agent is running fine on Solaris and pingable from Windows OEM Console.
Preferred confidential setting:
For oracle database: SYS/syspassword, Role: SYSDBA
For SunOS node: Oracle/oracel_account_password
For listener: none
Problem:
Created a job, run task "Run SQL script", got "2015 -Authentication errors" and job failed.
Thanks in advancePreferred confidential setting:
For oracle database: SYS/syspassword, Role: SYSDBA
For SunOS node: Oracle/oracel_account_password
For listener: none
Above is what you listed in your post. Try using your SunOS username and logon instead of the Oracle/oracel_account_password.
Also, on Windows NT, the os user must have the advanced user right "logon to submit batch jobs" or something like that.
Hope this helps What about node password
one think more give right {Batch job create } to nt user -
Sconadm timeout - Sun On-line Account authentication failed.
Hello,
I run Solaris 10 5/08 s10x_u5wos_10 X86.
and the registration timeout. See below the basicreg.log
I copy the commands i used. and the output. I also run the suc.sh script and post in the end.
#ping 82.98.86.176
82.98.86.176 is alive
#sconadm register -a -r regfile
sconadm is running
Authenticating user ...
Sun On-line Account authentication failed
failed registration!
telnet cns-transport.sun.com 443
Trying 198.232.168.137...
traceroute to cns-transport.sun.com (198.232.168.137), 30 hops max, 40 byte packets
1 172.30.168.254 (172.30.168.254) 0.409 ms 0.241 ms 0.147 ms
2 125-230-64-254.dynamic.hinet.net (125.230.64.254) 2.334 ms 77.107 ms 1.457 ms
3 tc-kk-t64-2.router.hinet.net (168.95.149.78) 0.937 ms 1.112 ms 0.867 ms
4 220-128-17-98.HINET-IP.hinet.net (220.128.17.98) 1.246 ms tc-c12r12.router.hinet.net (220.128.17.158) 1.252 ms 1.138 ms
5 tp-crs11.router.hinet.net (220.128.2.10) 4.423 ms 4.281 ms 15.803 ms
6 220-128-4-29.HINET-IP.hinet.net (220.128.4.29) 5.076 ms 4.274 ms 4.034 ms
7 r02-s2.tp.hinet.net (220.128.4.38) 16.038 ms 4.358 ms 4.359 ms
8 r12-pa.us.hinet.net (211.72.108.121) 142.842 ms 150.936 ms 142.567 ms
9 r11-pa.us.hinet.net (202.39.83.193) 143.152 ms 142.800 ms 142.830 ms
10 206.111.12.165.ptr.us.xo.net (206.111.12.165) 142.651 ms 142.925 ms 142.852 ms
11 te-11-0-0.rar3.sanjose-ca.us.xo.net (207.88.12.69) 144.081 ms 144.510 ms 144.974 ms
12 207.88.14.117.ptr.us.xo.net (207.88.14.117) 218.322 ms 218.461 ms 217.083 ms
13 207.88.14.118.ptr.us.xo.net (207.88.14.118) 218.363 ms 217.950 ms 218.103 ms
14 207.88.183.54.ptr.us.xo.net (207.88.183.54) 214.827 ms 214.479 ms 216.544 ms
15 border7.te2-2-bbnet2.wdc002.pnap.net (216.52.127.87) 214.862 ms 215.908 ms 214.832 ms
16 seven-6.border7.wdc002.pnap.net (216.52.125.250) 214.658 ms 214.440 ms 214.558 ms
17 * * *
18 * * *
# cat basicreg20081024111737681.log
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicReg loadPropertiesFromHomeDir
INFO: properties file loaded from the default config.properties
24.10.2008 11:17:48 com.sun.scn.util.Utils getLocalHostNames
INFO: get hostname 82.98.86.176
24.10.2008 11:17:48 com.sun.scn.util.Utils getLocalHostNames
INFO: first returned hostname 82.98.86.176
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setHost() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setPort() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setUser() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setPassword() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: userName = [email protected]
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: password = *****
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: hostName =
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: portalEnabled =false
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI run
INFO: Authenticating user ...
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter getSCNClientSession
INFO: CREATING SCNClientSession
24.10.2008 11:25:18 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter loginAccount
SCHWERWIEGEND: Error: login account exception: Connection refused to host: 82.98.86.176; nested exception is:
java.net.ConnectException: Connection timed out
24.10.2008 11:25:18 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter loginAccount
SCHWERWIEGEND:
com.sun.scn.jmx.impl.UISClientLoginModule.login(UISClientLoginModule.java:151)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
javax.security.auth.login.LoginContext$5.run(LoginContext.java:706)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.login.LoginContext.invokeCreatorPriv(LoginContext.java:703)
javax.security.auth.login.LoginContext.login(LoginContext.java:575)
com.sun.scn.jmx.impl.UISClientLogin.login(UISClientLogin.java:201)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
javax.management.StandardMBean.invoke(StandardMBean.java:323)
com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
java.security.AccessController.doPrivileged(Native Method)
javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
sun.rmi.transport.Transport$1.run(Transport.java:153)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:149)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
java.lang.Thread.run(Thread.java:595)
24.10.2008 11:25:18 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter getLoginResult
INFO: SCN Fault: Connection refused to host: 82.98.86.176; nested exception is:
java.net.ConnectException: Connection timed out
24.10.2008 11:25:18 com.sun.cns.basicreg.BasicRegCLI run
SCHWERWIEGEND: Sun On-line Account authentication failed
#sh suc.sh
User: root
Logname: root
Freitag, 24. Oktober 2008 11:48 Uhr CST
xxx
smpatch settings:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
Failure: Cannot connect to retrieve detectors.jar: This system is currently unregistered and is unable to retrieve patches from the Sun Update Connection. Please register your system using the Update Manager, /usr/bin/updatemanager or provide valid Sun Online Account(SOA) credentials.
Sun UC patch revision:
120336-04
121082-06
121119-13
121454-02
123004-03
123006-07
123631-03
123896-04
124187-07
Solaris release:
Solaris 10 5/08 s10x_u5wos_10 X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
Solaris Kernel: Generic_127128-11
Machine Type: i86pc
Platform: i86pc
Java -version:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_14-b03)
Java HotSpot(TM) Client VM (build 1.5.0_14-b03, mixed mode, sharing)
Cacao Java version:
java-home=/usr/jdk/jdk1.5.0_14
Software Cluster:
CLUSTER=SUNWCall
All ccr properties:
Property not defined: 18
18:
cns.assetid:
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
cns.httpproxy.port:
cns.regtoken:
cns.security.password:
cns.security.privatekey:
cns.security.publickey:
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
patchsvr not installed.
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Edited by: Denis_Theinert on Oct 24, 2008 4:13 AMI could connect all of this hosts without problems.
# telnet sun.com 80
Trying 72.5.124.61...
Connected to sun.com.
Escape character is '^]'.
^CConnection to sun.com closed by foreign host.
# telnet cns-services.sun.com 443
Trying 198.232.168.133...
Connected to cns-services.sun.com.
Escape character is '^]'.
^CConnection to cns-services.sun.com closed by foreign host.
# telnet getupdates1.sun.com 443
Trying 198.232.168.136...
Connected to getupdates1.sun.com.
Escape character is '^]'.
^CConnection to getupdates1.sun.com closed by foreign host.
# telnet a248.e.akamai.net 443
Trying 60.254.154.75...
Connected to a248.e.akamai.net.
Escape character is '^]'.
^CConnection to a248.e.akamai.net closed by foreign host.
# -
Reciving mail via IMAP giving authentication error with valid details
Hi all,
Thanks to shannon,i changed the imap .. bt now error is with the connect method, the username,password,whcih iam passing as a parametre.Its giving error as authentication error, login failed.. but the username and password were corret..
store.connect(Host,username,password);
Host value iam passing is the server ipaddress,even i tried with 4 parameters including portas int type no use.
Please ,help to cross over this bug.
Thanks for you ll n advance.
Regards,
ChintuSorry for this late post but this is what debug says:
DEBUG: getProvider() returning javax.mail.Provider[STORE,imap,com.sun.mail.imap.IMAPStore,Sun Microsystems, Inc]
* OK [CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS] Courier-IMAP ready. Copyright 1998-2005 Double Precision, Inc. See COPYING for distribution information.
A0 CAPABILITY
* CAPABILITY IMAP4rev1 UIDPLUS CHILDREN NAMESPACE THREAD=ORDEREDSUBJECT THREAD=REFERENCES SORT QUOTA IDLE ACL ACL2=UNION STARTTLS
A0 OK CAPABILITY completed
A1 LOGIN user password
A1 NO Login failed.
Script threw exception: Sourced file: mail.java : Method Invocation store.connect : at Line: 11 : in file: mail.java : store .connect ( "host" , "user" , "password" )
Target exception: javax.mail.AuthenticationFailedException: Login failed.
javax.mail.AuthenticationFailedException: Login failed.
at com.sun.mail.imap.IMAPStore.protocolConnect(IMAPStore.java:293)
at javax.mail.Service.connect(Service.java:234)
at javax.mail.Service.connect(Service.java:135)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at bsh.Reflect.invokeMethod(Unknown Source)
at bsh.Reflect.invokeObjectMethod(Unknown Source)
at bsh.Name.invokeMethod(Unknown Source)
at bsh.BSHMethodInvocation.eval(Unknown Source)
at bsh.BSHPrimaryExpression.eval(Unknown Source)
at bsh.BSHPrimaryExpression.eval(Unknown Source)
at bsh.Interpreter.eval(Unknown Source)
at bsh.Interpreter.source(Unknown Source)
at bsh.Interpreter.main(Unknown Source) -
Revision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.asRevision: 1774
Author: [email protected]
Date: 2008-05-16 13:29:10 -0700 (Fri, 16 May 2008)
Log Message:
Bug: BLZ-176 - Not getting an authentication error when Producer tries to send a message over streaming channel with insufficient credentials.
QA: Yes
Doc: No
Checkintests: Pass
Details: This was caused by the fact that streaming channels do not report connected until the initial ping completes and a URLStream is established with the server. Added some extra code in ChannelSet to make sure authentication errors are reported with correct faultCode even if the channel is not reporting connected.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-176
Modified Paths:
flex/sdk/branches/3.0.1.x/frameworks/projects/rpc/src/mx/messaging/ChannelSet.as -
CUP 5.2 - LDAP Authentication error - "User credentials not valid."
Hi Experts ,
I have set up LDAP "SUN ONE" as a authentication source for our CUP 5.2 SP11 Patch1 (Build-62316). But when I try to logon with my network id,I receive error "User credentials not valid."
Please find the log below.
Thank you for your help,
Regards,
Abderrahim
2011-03-01 12:07:57,232 [SAPEngine_Application_Thread[impl:3]_27] ERROR Failed to log in a867168
com.virsa.ae.service.umi.AuthenticationFailureException: No user details found
at com.virsa.ae.service.umi.ldap.LDAPAuthenticator.validate(LDAPAuthenticator.java:140)
at com.virsa.ae.actions.LoginAction.requestorLoginHandler(LoginAction.java:847)
at com.virsa.ae.actions.LoginAction.execute(LoginAction.java:82)
at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:256)
at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:423)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by:
com.virsa.ae.service.umi.UMIException: SUNONE error reading search results
at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUsers(LDAPSearchUser.java:698)
at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUserById(LDAPSearchUser.java:760)
at com.virsa.ae.service.umi.ldap.LDAPAuthenticator.validate(LDAPAuthenticator.java:131)
at com.virsa.ae.actions.LoginAction.requestorLoginHandler(LoginAction.java:847)
at com.virsa.ae.actions.LoginAction.execute(LoginAction.java:82)
at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:256)
at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:423)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Caused by:
javax.naming.NameNotFoundException: [LDAP: error code 32 - No Such Object]; remaining name ''
at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3030)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2951)
at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2757)
at com.sun.jndi.ldap.LdapCtx.searchAux(LdapCtx.java:1828)
at com.sun.jndi.ldap.LdapCtx.c_search(LdapCtx.java:1751)
at com.sun.jndi.toolkit.ctx.ComponentDirContext.p_search(ComponentDirContext.java:386)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:347)
at com.sun.jndi.toolkit.ctx.PartialCompositeDirContext.search(PartialCompositeDirContext.java:332)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:252)
at javax.naming.directory.InitialDirContext.search(InitialDirContext.java:252)
at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUsers(LDAPSearchUser.java:518)
at com.virsa.ae.service.umi.ldap.LDAPSearchUser.getUserById(LDAPSearchUser.java:760)
at com.virsa.ae.service.umi.ldap.LDAPAuthenticator.validate(LDAPAuthenticator.java:131)
at com.virsa.ae.actions.LoginAction.requestorLoginHandler(LoginAction.java:847)
at com.virsa.ae.actions.LoginAction.execute(LoginAction.java:82)
at com.virsa.ae.commons.utils.framework.NavigationEngine.execute(NavigationEngine.java:256)
at com.virsa.ae.commons.utils.framework.servlet.AEFrameworkServlet.service(AEFrameworkServlet.java:423)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)My issue is stil not received, i hav send a document to the system team to follow for the integration. The AD configuration for QM shud be very expicit or else integration will not work. I am attachin the doc here. Let me knw if that helps.
-
How to fix authentic error in game centre of iPad mini?
How to fix authentic error in game centre of iPad mini?
Following further research, this keyboard lag issue appears to be related to the (botched) iOS 7.1 update. It's good to know I am not the only user who had his iPad mini rendered unusuable by the iOS 7.1 update, however that does not solve my problem.
Anyone out there who has further suggestions (except doing a factory reset via iTunes)? -
Remote Desktop Connection - Authentication error
Hello,
I wish to connect to my work PC from my laptop. The remote desktop connection was working fine till yesterday, but today i receive the following error when i try to connect -
"An authentication error has occurred. The Local Security Authority cannot be contacted. Remote Computer: <name>."
I have Win 7 ultimate installed on my 32 bit system, and have tried solutions proposed in the other threads. I do not require a NLA check for connection, i have always used the remote desktop with this option unchecked. Could anyone help me with this please?
Is this a error on my Laptop, or do i need to contact the network administrators for this?Hi!
It could be as easy as you need to change your password on your domain accout.
Are both computers connected to the same domian or is your work computer connected to a domain and your laptop connected to a workgroup?
If your password has expired, this error can occur, so I would start to check that since it stoped working over night.
Best regards
Andreas Molin -
Query: Authentication Error while consuming a web service
Hi All,
I've generted a WSDL file by using the following steps.
1.Created a RFC enabled ABAP pgm
2.Created a web service out of it (using webservice creation wizard - default virtual host. so my port is 8100)3.Released the web service (WSCONFIG)
4.Generated the WSDL file (WSADMIN + CTRL F1).
Then I wanted to consume it from a .Net program. But am getting authentication error in .Net.
Do I need to configure anything for Authentication (username and password) from R/3 side?..
How Do I pass the credential info from .Net?.
Should I take care of any setup other than what I've specified?.
Any Blogs or response would be appreciated.
Thanks,
Joe.Usually like this:
WSReference1.WSPProxy proxy = new WSReference1.WSPProxy();
proxy.Credentials = new System.Net.NetworkCredentials("Username", "Password");
proxy.PreAuthenticate = true;
proxy.CallMethod();
Maybe you are looking for
-
I tried to update the software of my iphone 3gs while charging with my Macbook Pro. While the phone was restarting after installation, in the setting up my phone menu, it stops midway with a message in itunes on the laptop that there is no simcard.
-
Actionscript not working right
hi sorry if this is the wrong place to post this, but it seems like the right place. basically, i have some actionscript which works fine when i export an SWF using flash, or run the swf as a standalone, but when i make the SWF a projector / exe file
-
Export from iPhoto 08 with sequential filenames retaining iPhoto order?
Is there some way to export photos from iPhoto 08 with filenames that will be seen by the Finder (or a PC) as having the same order as the photos in iPhoto? I used the Sequential Filenames option in the Export pane to export a 1790 image album, but t
-
Hey everybody, I have a problem with designing my input-ready query. I know that I have to restrict the data that every record can uniquely be identified. If I define a very strict filter, I can enter plan data. But if I add only one characteristic t
-
Unsupported pain in the a***
Just upgraded to a Mac, and am getting used to a new life so to speak. Took my windows version of lightroom 2 over to Mac which recognised it. All seemed to be doing well until I attempted a download from my CF card using a new reader. Imported RAW p