Sun cluster3.2 on HA sun v890 +3320
Before running the scinstall , I check the SUN StorEdge 3320 ,
root@osssvr-1 # /opt/SUNWsscs/sbin/sccli
Available devices:
1. /dev/rdsk/c2t0d0s2 [SUN StorEdge 3320 SN#0B3B93] (Primary)
2. /dev/rdsk/c3t0d0s2 [SUN StorEdge 3320 SN#0B3C36] (Primary)
Please enter selection: 1
sccli> show redundancy
Primary controller serial number: 324741
Primary controller location: N/A
Redundancy mode: Active-Active
Redundancy status: Scanning
Secondary controller serial number: 0
sccli> show inquiry-data
Vendor: SUN
Product: StorEdge 3320
Revision: 415H
Peripheral Device Type: 0x0
NVRAM Defaults: 415H 3320 S477U
Bootrecord version: 1.31K
Serial Number: 0B3B93
Page 80 Serial Number: 0B3B932AF0E24300
Page 83 Logical Unit Device ID: 600C0FF0000000000B3B932AF0E24300
IP Address: 192.168.8.17
Page D0 Target ID: 0
Ethernet Address: 00:C0:FF:0B:3B:93
Device Type: Primary
sccli> exit
root@osssvr-1 # /opt/SUNWsscs/sbin/sccli
Available devices:
1. /dev/rdsk/c2t0d0s2 [SUN StorEdge 3320 SN#0B3B93] (Primary)
2. /dev/rdsk/c3t0d0s2 [SUN StorEdge 3320 SN#0B3C36] (Primary)
Please enter selection: 2
sccli> show redundancy
Primary controller serial number: 324875
Primary controller location: N/A
Redundancy mode: Active-Active
Redundancy status: Scanning
Secondary controller serial number: 0
sccli> show inquiry-data
Vendor: SUN
Product: StorEdge 3320
Revision: 415H
Peripheral Device Type: 0x0
NVRAM Defaults: 415H 3320 S477U
Bootrecord version: 1.31K
Serial Number: 0B3C36
Page 80 Serial Number: 0B3C362AF0E24300
Page 83 Logical Unit Device ID: 600C0FF0000000000B3C362AF0E24300
IP Address: 192.168.8.18
Page D0 Target ID: 0
Ethernet Address: 00:C0:FF:0B:3C:36
Device Type: Primary
sccli> exit
by the guide Secondary controller serial number: is SUN StorEdge 3320 SN#0B3C36 serial number , not 0,
but i can't config , pls help me !
Can you check whether all the cluster SMF services are online on VM1?
# svcs -xv
-Venku
Similar Messages
-
Global device issue in sun cluster3.2
In my 2 node cluster (sun cluster3.2) running on x86 VMs. One of my nodes VM1 does not have the global devices populated due to which i cannot failover my file system to node VM1 , what could be the reason for this and how can i rectify it ?
VM1:/>cd /dev/global
-bash: cd: /dev/global: No such file or directory
VM1:/>
VM2:/>cd /dev/global
VM2:/dev/global>ls
admin dsk rdsk rmt
VM2:/dev/global>
VM2:/>clnode status
=== Cluster Nodes ===
--- Node Status ---
Node Name Status
VM2 Online
VM1 Online
VM2:/>clq status
=== Cluster Quorum ===
--- Quorum Votes Summary from latest node reconfiguration ---
Needed Present Possible
2 3 3
--- Quorum Votes by Node (current status) ---
Node Name Present Possible Status
VM2 1 1 Online
VM1 1 1 Online
--- Quorum Votes by Device (current status) ---
Device Name Present Possible Status
d3 1 1 Online
VM2:/>cldev status
=== Cluster DID Devices ===
Device Instance Node Status
/dev/did/rdsk/d2 VM1 Ok
VM2 Ok
/dev/did/rdsk/d3 VM1 Ok
VM2 OkEdited by: fugitive on Dec 8, 2009 5:58 PMCan you check whether all the cluster SMF services are online on VM1?
# svcs -xv
-Venku -
Real Application Cluster on Sun Solaris 8 and Sun Cluster 3
Hello,
we want to install Oracle 9i Enterprise Edition in combination with Oracle Real Application Cluster-Option on 2 Nodes. Every node (12-CPU-SMP-Machine) should running Sun Solaris 8 and Sun Cluster 3 Service.
Does this configuration work with ORAC? I found nowhere informations about. Is there anything I have to pay special attention for during installation?
Thank you for helping and best regards from Berlin/Germany
Michael WuttkeForms and report services work fine on solaris 8.
My problem is on the client side.
I have to use solaris 8 with netscape like forms clients
and I wasn't able to make it work with java plugins.
Any solution?
Mauro -
Problems with xalan migrating from Sun One 7 to Sun One 8.1
Hi!
I'm migrating one application from Sun One 7 to Sun One 8.1, my problem is when I use xalan/xerces to transform XML/XSL appears the following error:
javax.xml.transform.TransformerException: java.lang.NullPointerException
I put my xalan/xerces version in my WEB-INF/lib but I think that the problem is that internally the server use its xalan that is a strange version, because in MANIFEST file put 2.6.0 version but I compared with 2.6.0 of xalan and it's different.
How any idea to solve this?
Thanks in advance
Josep MAs you have an existing portal installation, you will need to have the 9iAS Portal 3.0.8 Upgrade Scripts in order to upgrade to 3.0.8. We expect to have these 3.0.8 upgrade scripts available next week (April 23-27) for download from OTN.
With regards to import/export, Import/Export Utilities currently will ONLY work between portal installations which are at the SAME VERSION LEVEL.
The 3.0.8 upgrade process is an "in-place" upgrade, meaning that it upgrades an existing installation to the 3.0.8 release. You will need to have Portal 3.0.7 on your new box, and then upgrade "in place" to 3.0.8 there. I would advocate also doing a "cold backup" snapshot(backup all database data and log files) of your existing production database files as well.
null -
Sun Server 10 or Sun Work station 10 os
Hi
I have download sun OS 10version from sun website and installed
just I would like to know is that server version or workstation version.
please assist me in this
Thanks in advance
ShahulThere is only one version of Solaris 10 for both servers and workstations - there are not separate editions like some releases.
-
Req Help for "warning: sun.misc.SignalHandler is Sun proprietary API "
Hi All,
I am getting the below exception when i am building the class. Please guide me and please provide any alternate solution for this.
[javac] main\SignalHandler.java:35: warning: sun.misc.SignalHandler is Sun proprietary API and may be removed in a future release
[javac] implements sun.misc.SignalHandler
[javac] ^
[javac] main\SignalHandler.java:69: warning: sun.misc.Signal is Sun proprietary API and may be removed in a future release
[javac] public void handle( final sun.misc.Signal signal )
[javac] ^
[javac] auditlog\core\AuditLogFileWriter.java:26: warning: com.sun.org.apache.xalan.internal.xsltc.runtime.Hashtable is Sun proprietary API and may be removed in a future release
[javac] public static Hashtable writingStatus=new Hashtable();
[javac] ^
[javac] ftpcommon\ftp\PasswordEnDecrypt.java:156: warning: sun.misc.BASE64Encoder is Sun proprietary API and may be removed in a future release
[javac] return new sun.misc.BASE64Encoder().encode(enc);
[javac] ^
[javac] ftpcommon\ftp\PasswordEnDecrypt.java:182: warning: sun.misc.BASE64Decoder is Sun proprietary API and may be removed in a future release
[javac] byte[] dec = new sun.misc.BASE64Decoder().decodeBuffer(str);
[javac] ^
[javac] ftpcommon\main\SignalHandler.java:57: warning: sun.misc.Signal is Sun proprietary API and may be removed in a future release
[javac] sun.misc.Signal.handle( new sun.misc.Signal(signalName), this );
[javac] ^
[javac] main\SignalHandler.java:57: warning: sun.misc.Signal is Sun proprietary API and may be removed in a future release
[javac] sun.misc.Signal.handle( new sun.misc.Signal(signalName), this );
Thanks & Regards,
Rajeshwar
Edited by: Rajeshwar_Java on Apr 27, 2009 5:31 AM
Edited by: Rajeshwar_Java on Apr 27, 2009 5:32 AMas corlettk already told you: avoid those API whenever possible.
Regarding your cases:
* SignalHandler: proprietary API, there's not alternative. Use it if you must. Fail gracefully if it isn't there
* Hashtable: seems like you simply picked the wrong one. Use the one in java.util
* Base64 stuff: Plenty of free (BSD licensed) implementations out there, I'm sure there's one in commons-codec as well. Use those instead. -
Are SUN StorEdge c2 and Sun Storagetek C2 the same ?
Hello All,
Are SUN StorEdge c2 and Sun Storagetek C2 the same ? or are they 2 different products.
Thanks
Venkat Jupallimmmmn, not sure about this one, but I would assume that moving from StorEdge to Storagetek is brand name related and came about from Sun Microsystems' acquisition of StorageTek late '05. Call marketing for more information.
-
Sun cluster3.1u1 rpc authentication error
I am trying to setup two node sun cluster on two ultra 10s. I have already setup one node and it is online.
when I trty to add another node using scinstall and choosing " add machine to existing cluster" and after
typing machine name and cluster name , i get
rpc authentication error.
This is solaris 9 and sun cluster 3.1 u1 environment.
any one, any clue!!!
thanks
syedHave you informed the existing node running the cluster that you wish to extend the node list?
If not you'll need to run scsetup on the original first, before attempting to add a new node via scinstall. -
Up-gradation of Sun Fire 6800 to Sun Fire E6900 UltraSPARC IV+ Processors
We wanted to upgrade our exisiting two Sun Fire 6800 Servers to Sun FIre E6900 with Ultra SPARC IV+ processors boards and memory only. This, we want to do through Sun UAP uniboard promotion.
So we want to know the compatibility and additional requirement before going a head for this activity ....
Tech specs details mentioned below ....
Existing Sun FIre 6800 Servers Specs ...
Processor : sparcv9 UltraSPARC-III+
Model : Sun Fire 6800
Processor Speed : 900 MHz
RAM : 48 GB
Processor Count : 24
Will be upgraded to Sun FIre E6900 ........
Upgrade to E6900, 12 x 1.8Ghz US IV+ CPU, 96GB Memory.
I want to confirm below queries before placing order with Sun Micro sysytems...
1) Is there requirement for Box change ( Chassis ) or Sun Microsystems will provide it free of cost with this promotional programme ?
2) Is there any need to add more Power supply due to this up-gradation or additional PS will be a part of this kit ?
3) Is there anything left out in our discussion or planning which needs to be added or upgraded to make the solution compatible ?
Please add your valuable inputs for this up-gradation . Quick response will be highly appreciated.
Thanks in advance ...
Rajeev Kumar
email : [email protected]Considering the domain name in your email address...
This is far from the first SF6800 your company administers, that's been upgraded.
Having said that, you need to keep in mind that these forums are NOT a venue for techsupport from Sun. They are hosted so that the user community can have general conversations, swap stories, and more.
So, as for your questions:
(1) Contact Sun and ask them for an accurate answer ( and no, the outer chassis does not get swapped ).
(2) Contact Sun and ask them for an accurate answer ( I seem to remember that you must buy whatever PSU's, system controllers, and whatever else may be necessary, in addition to the uniboards ).
(3) I suggest you discuss this plan with your peers in other EDS sites that have already done this. This promotion is not anything new. It seems to be offered every few months or so, since the E6900's first arrived in 2004.
Expect to do a ton of firmware and OS upgrades so that the system can handle the US-IV+ architecture of the new hardware. That will need to be done before the new hardware is inserted to the chassis. -
I am beginner to sun one studio and sun one application server
How can i access a cmp from a jsp page.
in sun one application server.
thanx in advancewhere do you get the weblogic plugin from ?
i am intrested in doing the same thing
thanx
prem
"Ivan" <[email protected]> wrote in message
news:[email protected]..
>
Dear all,
My boss require me to use Sun One Studio 4 update 1 to do the development,but
I find it's a nightmare to deploy the EJB/ application to the WebLogic6.1.
>
I've already installed the weblogic plug-in in the Sun One Studio.
During deploying I could not find any setting that ask me for theweblogic-ejb-jar.xml.
So I think the deployment will fail.
Is there any others tutorial or e-book that can help me to familiar withthe deployment
process?
Many Thanks for all of you.
Ivan -
Integrate Sun ONE Messaging and Sun ONE Calendar server with Portal 6.0
We need to integrate (implement a Single Sign On solution) Sun ONE/iPlanet Messaging and Calendar servers with Portal 6.0. The Msg and Cal. servers do not use Portal Profile server as their DS and have a different DS.This directory server is the external DS for Portal. After users login to Portal, they should be able to access Msg and Cal. servers without login to them again.
1. How do we do this without writing a java code/servlet ?
2. Is there any way that we could configure DSAME to create the URL,add userID and password to it and forward that URL to above servers ?Hi,
The SunOne communication providers for version 6.0 will be released soon.
(you can get beta versions from early access program)
Like in the portal version 3.0 these channels
are enabling SSO for messaging and calendar servers.
(I tested them with iMSG5.2 and Calendar5.1.1)
Cheers,
Alex :-) -
Integration of sun identity manager with sun access manager
Hi i am working on integration of sun identity manager 6.0 with SP1 and sun access manager7.0.IDM was deployed on Sun application server 8.1.SAm is installed on SunOneWebserver i am working on windows 2003 server.I downloaded the agent for the application server and installed.
when i am configuring resource in IDM i am getting following error.
testconnection failed for resource(s):
sun access manager could notconnect as user 'amadmin' with specified password==>com.sun.identity.authentication.spi.AuthLoginException:failed to create new AuthenticationContext{0}\n.
i modified amagent.properties,amconfig.properties and web.xml also
can any one help me on this.Hi i am working on integration of sun identity manager 6.0 with SP1 and sun access manager7.0.IDM was deployed on Sun application server 8.1.SAm is installed on SunOneWebserver i am working on windows 2003 server.I downloaded the agent for the application server and installed.
when i am configuring resource in IDM i am getting following error.
testconnection failed for resource(s):
sun access manager could notconnect as user 'amadmin' with specified password==>com.sun.identity.authentication.spi.AuthLoginException:failed to create new AuthenticationContext{0}\n.
i modified amagent.properties,amconfig.properties and web.xml also
can any one help me on this. -
DBX error in Sun Studio 9 on Sun 5.10
Hello this topic is the "following" of this one : http://forums.sun.com/thread.jspa?threadID=5333342&tstart=0
Indeed I thought the problem was solved but it wasn't.
I will try to find new elements to provide you with.Ok for the pstack I will run it on the next try
regarding the patch, I alrerady tried but the patch refused to be installed because no patch was installed before !?
more over when I tried to installed previous patch, it was refused too because they are obsolete ! :/
by the way, yesterday I found a log with this inside
dbx: can't stat /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndcorex.so -- No such file or directory
Reading libndcorex.so
dbx: warning: Couldn't open file: /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndcorex.so (No such file or directory)
dbx: internal error: Can't read /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndcorex.so
Reading libXext.so.0
dbx: warning: The corefile has a different ELF checksum for /usr/lib/libXext.so.0
checksums are: file: 0x43e6 core: 0xf768
See `help core mismatch' for more details.
dbx: can't stat /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndsec.so -- No such file or directory
Reading libndsec.so
dbx: warning: Couldn't open file: /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndsec.so (No such file or directory)
dbx: internal error: Can't read /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndsec.so
dbx: can't stat /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndoaba.so -- No such file or directory
Reading libndoaba.so
dbx: warning: Couldn't open file: /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndoaba.so (No such file or directory)
dbx: internal error: Can't read /opt/HCLT/presenter/4.2/ee21/c/libdbg/libndoaba.so
Reading libdga.so.1
dbx: warning: The corefile has a different ELF checksum for /usr/openwin/lib/libdga.so.1
checksums are: file: 0xd9a9 core: 0xb265
See `help core mismatch' for more details.
Reading libc_psr.so.1
dbx: warning: The corefile has a different ELF checksum for /usr/lib/libthread.so.1
checksums are: file: 0x909e core: 0xe33b
See `help core mismatch' for more details.
dbx: core file read error: address 0xfe6dd698 not in data space
dbx: warning: could not initialize libthread_db.so -- generic libthread_db.so error
dbx: warning: thread related commands will not be available
dbx: warning: see `help lwp', `help lwps' and `help where'
(l@1) terminated by signal ABRT (Abort)The strange point is that presenter 4.2 has never been installed on this machine, we're running Presenter 5.3 !? -
Sun Fire T1000 vs Sun Enterprise T1000
Is there any difference between the Sun Fire T1000 and the Sun Enterprise T1000 or is Sun listing the same server on it's website with two different names?
Is the system installed with a Dual-Channel Ultra320 LVD SCSI PCI-e adapter
-
Sun Crypto accelerator 6000 + Sun One Web Server 6.1
hi,
I want 3des to be the firts of ciphers for clients to utilize my Crypto Accelerator. Also, I want RC4 to be the second one.
But all browsers uses RC4 by default!
This string doesn't work in server.xml, what did i miss?
<SSLPARAMS servercertnickname="Sun Metaslot:Server-Cert" ssl2="off" ssl2ciphers="-desede3,-rc4,-rc4export,-rc2,-rc2export,-des" ssl3="on" tls="on" ssl3tlsciphers="+rsa_3des_sha,+rsa_rc4_128_sha" tlsrollback="on" clientauth="off"/>
Resume: Why I need crypto accelerator if all traffic is RC4 ? :)
Message was edited by:
mpechYou cannot get that behavior.
When an SSL client and server negotiate the connection, the client sends a list of all the cipher suites it supports. From that list the server will pick the most secure cipher suite which it also supports (if the server doesn't support any of the cipher suites proposed by the client, the connection establishment will fail).
RC4 (128bit) is more secure than 3DES (112 bit). Thus, a server will never pick 3DES above RC4_128 if both are valid options (i.e. when both client and server support both). If you really wanted to force use of 3DES you need to disable RC4_128 in the server (or all the clients; or both).
Maybe you are looking for
-
AppleTV / AirPlay mirroring
Hey! I have a new AppleTV out of the box and am trying to mirror my many iDevices through it. Mirroring works fine with an iPad 3 and an iPad 2. However, the AirPlay Mirroring "on/off" toggle switch is not available on an iPhone 4, a first gen iPad o
-
Need HELP! Opening a PDF file from different URL
I have a application that links to viewpdf.class. This class file will go to the FTP where the pdf file is located and open it. How do i do this using java? Here is what I have.. .i'm stuck URL url = new URL("ftp://user01:[email protected]/"+ fold
-
Anyone seeing their 2nd generation Apple TV not resuming after being paused? Mine doesn't offer the "resume playback" just starts the episode over. I Have reset the device, I have unplugged and rebooted. No change . Was working fine 1 month ago.
-
How can I get the light for the power button to go back on?
I would like to get the power button light to work properly again. I have a p6813W desktop running Windows 7, 64 bit OS. The first time the machine went into sleep mode and was awoken the power button light went out and has not yet to come back on ev
-
What changend in FF26+? Hangs with many tabs
I do a lot of research and currently I have over 750 open tabs. I only load tabs when I click on them. FF25 works very good without any big problems up to over 1300 open tabs. The only problem I have are hangs every 5 to 10 minutes for about 30 to 60