Sun Convergence - correct version of GF

Hi,
I'm looking for release document where I can find infromaction which version of GF is the best for Sun Convergence.
I have Sun Convergence with patch 10.01_182930 and GF v2.1 Patch05 (9.1_02 Patch11). I wonder if I can install the latest patch of GF with my Convergence ... and which GF should be correct to the latest Convergence (patch 11).
Irek

NarenLahoti wrote:
yes you can install GF v2.1.1 Patch07 (9.1_02 Patch13)
Glassfish 2.1.1 Patch 07 is available from sunsolve:
128643-15 => Solaris Sparc
128644-15 => Solaris x86
128645-15 => Redhat Linux
This version fixes the following issue which is important if you are using Convergence with the IM service enabled:
bug #6875041 - "Grizzly leaks ConcurrentLinkedQueue when having Comet"
Also note that the upcoming Convergence patch 12 will have a number of IM related fixes:
bug #6632069 - "IM client disconnects automatically"
bug #6878227 - "IM Users status go unavailable shortly after logging in to IWC"
bug #6894013 - "im connection/session is lost when RID mismatched"
Convergence patch 12 should be available in ~2-3 weeks from Sun support.
Regards,
Shane.

Similar Messages

[svn:fx-4.x] 14680: update AIK version file with correct version of the AIK that we have

Revision: 14680
Revision: 14680
Author:   [email protected]
Date:     2010-03-10 12:16:06 -0800 (Wed, 10 Mar 2010)
Log Message:
update AIK version file with correct version of the AIK that we have
QE notes: no
Doc notes: no
Bugs: no
Reviewer: no
Tests run: no
Is noteworthy for integration: no
Modified Paths:
    flex/sdk/branches/4.x/in/air/air_version.txt

With all that automatic installations, beware of one thing:
It's up to the administrator of the machine to decide what VM he drives. Maybe there is a good reason for the admin NOT to drive the latest VM from Sun but a slightly older from IBM? It is not YOUR decision what VM runs on that machine.
Keep in mind that the JRE is a wrapper around the actual OS and as such it is not to be included with you app. Just think of it as if it would be an optional OS extension. You also do not deliver Oracle with you app if you just need ANY JDBC connection, do you?
With our customers we do it this way: We tell them that ANY Java 1.4 JRE is good to run our apps, but it is the customer's problem to get one, since we do not know the preferred VMs of that customer, nor could we provide a VM for every OS. For fairness reasons, we provide the latest Sun JRE for Windows, Solaris and LINUX with our app. But we do not start the installation of this.

JDK correct version for Portal 7.0 SP15

Hi gurus,
my client has SAP Portal 7.0 SP15 version.
I need to personalize portal.runtime.logon component with NWDS 7.0.15 (SP15).
Which are correct versions of JDK that I must use?
Is jdk1.5.0_14 correct?
Thanks a lot.
Gerardo

Hi Gerardo,
You can use Sun Microsystems J2SE SDK version 1.4.2_08 or 1.4.2_09 (Sun JDK 1.5 not tested). You can download this from Sun Microsystems at http://java.sun.com/products/archive/j2se/1.4.2_09/index.html. Please note that version 1.4.2_10 may cause installation problems.
Regards,
Uday.

Correct version of Java SDK for Red Hat 4 ES on x86_64

I need to install the Java SDK for Red Hat 4 ES on x86_64 and I'm unable to find the correct version to download.
Note 716604 says to download 1.4.2_13 at java.sun.com but the I can't find the Linux x86_64 bit version. Note 941595 is for Windows and Solaris only.
Red Hat's site mentions two versions; java-1.4.2-ibm and java-1.4.2-bea. I cannot find any SAP notes that mention those names. Has anyone used these successfully on Red Hat 4 x86_64?
Does anyone know where I can download the correct version of Java SDK?
Thanks

<a href="https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-8">https://www14.software.ibm.com/webapp/iwm/web/reg/download.do?source=lxdk&S_PKG=amd64142sr7&S_TACT=105AGX05&S_CMP=JDK&lang=en_US&cp=UTF-8</a>
I can open that link without a problem.
Check again...
Markus

Forwarding on Sun Convergence!

Hi !
On Sun Convergence, Forwading tab, I add an email address ( gmail), when customer send mail to me, I get that mail normal but that mail does not go to gmail and my customer received the following mail:
Your message cannot be delivered to the following recipients:
Recipient address: <mygmail>@gmail.com
Original address: [email protected]
Reason: Illegal host/domain name foundPlease help me solve this problem!
./iwcadmin -version
Sun Convergence 1.0-10.01 (built September 6 2009 - 18:26:20)

ergwertwrtfre wrote:
Why back-end don't move this message for front-end send to gmail ? By default the MTA will attempt to deliver the email based on the MX record of the domain of the recipient (gmail.com in this case).
You need to configure the back-end MTA to send the email to the front-end or you could enable LMTP from the front-end => back-end which would cause the mailForwardingAddress: expansion to occur on the front-end.
To get the back-end to relay external-bound emails (tcp_local) to the front-end MTA, make the following changes on the back-end MTA:
a) Add daemon <front-end hostname> to the tcp_local channel definition in the imta.cnf file.
b) Change the tcp_local channel definition in the same imta.cnf file so that "mx" is "nomx" and "single_sys" is "multiple"
So you should have something like:
! tcp_local
tcp_local smtp nomx multiple remotehost inner switchchannel identnonenumeric pool SMTP_POOL maytlsserver maysaslserver saslswitchchannel daemon frontendmta.domain.com
tcp_auth loopcheck
tcp-daemonc) Run ./imsimta cnbuild;./imsimta restart
To use LMTP between the front-end and back-end refer to:
http://wikis.sun.com/display/CommSuite/LMTP+Delivery
Regards,
Shane.

Maxmessagesize for each hosted domain on Sun Convergence.

Hi
When I set service.http.maxmessagesize, service.http.maxpostsize parameters is 20MB, all hosted domain in mail server is offered. But I want to limit message size for each hosted domain and set message size for them.
Ex:
hosted domain 1: abc.com maxmessagesize is 10MB
and hosted domain 2: def.com maxmessagesize is 20MB.
Can anyone help me ?
I use Sun Convergence to send/recv email.

>
Please always provide the version of Messaging Server that you are running (./imsimta version).
When I set service.http.maxmessagesize, service.http.maxpostsize parameters is 20MB, all hosted domain in mail server is offered. But I want to limit message size for each hosted domain and set message size for them.
Ex:
hosted domain 1: abc.com maxmessagesize is 10MB
and hosted domain 2: def.com maxmessagesize is 20MB.There is no per-domain service.http.maxmessagesize parameter. You can however restrict the size of the email that each domain can send at the MTA level through the use of a channel-level sieve e.g.
require ["ereject"];
# Restrict abc.com to 10MB
if address :domain :is "from" "abc.com" {
   if size :over 10M {
      ereject "Email exceeded maximum message size of 10MB for domain abc.com";
   stop;
# Restrict def.com to 20MB
if address :domain :is "from" "def.com" {
   if size :over 20M {
      ereject "Email exceeded maximum message size of 20MB for domain def.com";
   stop;
}Regards,
Shane.

Sun Convergence - 9fb is undefined

Hi!
Sun Convergence generate error *9fb is undefined* when i log in.
Anyone help me fix this problem?
Thanks !!
./imsimta version
Sun Java(tm) System Messaging Server 7.0-3.01 64bit (built Dec 9 2008)
libimta.so 7.0-3.01 64bit (built 09:24:13, Dec 9 2008)
Using /opt/sun/comms/messaging64/config/imta.cnf
SunOS smsg 5.10 Generic_137138-09 i86pc i386 i86pc

ergwertwrtfre wrote:
I sorry about wrong question, error *9fb is undefined* generate when user send a email. I don't change Convergence. Sometime this problem appears about 3 times every day when user send a email. That was what I suspected.
You are hitting bug#6803188 - "javascript error when sending reply after idle time".
This bug is fixed in the next Convergence patch (-07) which will be available with Comm-Suite-6 update 2.
Regards,
Shane.

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time

I am using an Mac PPC version 10.5.8 and I am trying to download the correct version of Flash Player. I did once but I had to install a "Clean Install" of my computer and when finished I had put back the new Flash Player I just installed well every time I try install the new player it is place in my Trash Folder and I can not get Player to work. I did everything I was to install it correctly but it still does not install it correctly. Can some help me. Bob

Some MacBook Pro versions cannot be upgraded past 10.6.8; others are maxed out at 10.7.5. newer models can go all the way to 10.10. So it is important to know exactly what version you have--there may be close to 40 variants produced since the MB made its debut in 2006.
You can safely give us a snapshot of your model and its current config that will allow us to deternmmine your model and its upgrade potential, plus show it you have any software that may impede any upgrades. Please download and install this free utility:
http://www.etresoft.com/etrecheck
It is secure and written by one of our most valued members to allow users to show details of their computer's configuration in Apple Support Communities without revealing any sensitive personal data.
Run the program and click the "Copy report to clipboard" button when it displays the results. Then return here and paste the report into a response to your initial post. It can often show if any harmful files/programs are dragging down your performance.
Remember that, on leaving OS10.6.8, you lose the ability to run older softare written for older PowerPC Macs (yours in Intel-based). Programs such as Office 2004 will no longer work (min of Office 2008 needed to work on newer OS versions), and AppleWorks will stop working completely

How do I choose and then install the correct version of Adobe Flash Player for my machine?

First thing - My computer - PROCESSOR: Intel Celeron 450 @2.2 Ghz, MEMORY: 4GB, OS: Windows 7 Home Premium SP1 64 bit, BROWSER: IE 9.0.8112.16421
Everything was hunky-dory until the auto-installer updated my version to the Flash Player 11.2 version and that's when it all went downhill. As soon as it installed that version, none of the TV networks, news networks or Hulu recognized that I had Adobe Flash Player. In addition, I could no longer create a blank new tab in IE or use the tools button (the little gear symbol) in the upper right hand of an IE window. Because of the IE problems, I figured it was a problem with IE and went about searching for a solution in that arena. I finally found something at Microsoft that helped me determine if it was an IE problem and went through the various steps. The final step required booting into safemode and trying to replicate the problem. IE worked fine in safemode so, Microsoft determined the problem had to be with outside influences.
After several frustrating attempts with other fixes including virus scanning and firewall settings, the problem persisted. I then un-installed Flash Player per Adobe's instruction and re-installed the recommended 'latest' version. The problem remained. So, when all else had failed I did a full system restore to a point over a month ago, which is prior to the occurence of the problem, while at the same time noting which drivers and programs would be affected. I already had a sneaking suspicion that it was Flash Player because I read the full system requirements for the recommended version that the auto installer was trying to install (see below). I then began updating everything one at a time to see if any of the windows/software/driver updates had any affect on IE. None did until I got to the Adobe Flash Player and updated it.
Now, what I think the problem is: The auto installer ONLY looks at Operating System and Browser to determine which version of Adobe Flash Player is correct. In this regard, my machine should use the latest 11.2 version. HOWEVER, if you look at the full system requirements for the 11.2 versions, you will note that it requires a...... 2.33 Ghz processor! In this regard, 11.2 is NOT the correct version for my machine as it only has a 2.2 Ghz processor. And I think therein lies the problem.
So. I freely admit that I am not a computer expert and am, in fact, so far removed from ever even contemplating wearing such a title that I'm sure all who read this are sitting in your offices having a good laugh at my expense. As such, I welcome anyone and everyone to tell me what I've done wrong and how I should go about fixing it. If my deductions are correct, then could someone please tell me how to choose the correct version for my machine and then tell me how to actually install it on my machine.
I know that this is a long post and I thank you all for your patience and any help you choose to offer me.

Mr. Willener,
Thank you for your reply.
I did un-install and then re-install per the Adobe recommendations which are what you listed in your reply. The problem remained until I did a MS Windows restore to a restore point a month or so ago. The IE problems vanished. However, now I'm using an outdated and unsupported version that is lower than most of the web pages require for their sites, at least the ones I want to view (they all say I need to upgrade my Flash Player which, when I did, put me in this fix).
As to:
Pat Willener wrote:
Usuallyexasperated wrote:
it requires a...... 2.33 Ghz processor!
You can safely ignore that requirement; it is simply not true.
Why would Adobe post a system requirement of 2.33 Ghz for 11.2 if it simply were not true?
Message was edited by: Usuallyexasperated

Need to dowload correct version of Firefox for Mac OS X 10.3.9

I have an old Mac which I will be retiring soon...as soon as I can get my information off it. To do so, I need to be able to use Firefox to upload it to a cloud storage system. But... I need the correct version of Firefox which will work with my old system. Any ideas? I certainly appreciate it.

The last version of Firefox to work on OS X 10.3.9 was Firefox 2.0.0.20, you can get it from ftp://ftp.mozilla.org/pub/mozilla.org/firefox/releases/2.0.0.20/mac/en-US/
That link is for the English-US version.

Correct version of jdeveloper to use with Oracle App Server 10g 10.1.2.0.2

Hi,
I just want to be sure, I am new to JDeveloper and I would just like to verify/ask what correct version of JDeveloper should we use so we could deploy the finished applications on our Oracle Application Server 10g 10.1.2.0.2 without errors?
Looking at this support matrix: http://www.oracle.com/technology/products/jdev/htdocs/11/as_supportmatrix.html#1013
I think we can use JDeveloper 10g (10.1.2)?
I downloaded Jdeveloper 10.1.2 from this link: http://www.oracle.com/technology/software/products/jdev/htdocs/soft10g.html.
Will this work well with Oracle Application Server 10g 10.1.2.0.2?
Thank you very much,
Mickey
Edited by: [email protected] on Aug 13, 2009 2:20 AM

Yes, it works well.
--olaf

Correct version of Memory analyzer

HI
I have installed the memory installer from https://www.sdn.sap.com/irj/sdn/wiki?path=/display/java/javaMemoryAnalysis&.
And I have also gone through the 10 min video course available at
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/f0a5d007-a35f-2a10-da9f-99245623edda.
But when I try to do the same analysis that what they explained in the video course, I found that options are not available in the tool that I downloaded. Could you plz advise where can I get the correct version of the tool or video course ??
Thanks
kumar

Hi Kumar,
you have downloaded the latest version of the tool. It is the video tutorial that is a little bit out of date. Most of the features are available in the current version of Memory Analyzer, but the menues and toolbar buttons might look different (e.g. the icons were replaced).
If you list the functions you are missing (cannot find) - I will guide you how to find them.
Best Regards,
Elena.

I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would ve

I talked to your guys yesterday about installing correct version of Lightroom 5 which I legally owned, and your guy provided me a download link (different from Creative cloud account), but somehow it was for Windows version not for Mac version. I would very much like to download a Mac version, so please send my correct web link. By the way my s. number for Lightroom 5 up is [removed], and I also have s.number for 4 up and 3 full.

The latest non-CC version of LR 5 is 5.7.1 and download links are available on the Adobe Updates page:
http://www.adobe.com/downloads/updates/
Both Mac and Win links are there.
If you are asking for a LR 5 CC link, which wouldn't require a serial number, please be more clear about that.

How to choose correct version of editing app when choosing to edit image from within InDesign?

Hi all,
Normally when I wish to edit an image that is in a layout in InDesign I either press option-click on the image or I ctrl-click on the image and choose to edit it using Photoshop CC, Illustrator CC or whatever app I need to use at any specific time. Well, I also have backups going that backup my entire system and so all of my applications get backed up as well.
Well, what is happening now (since today) is that when I choose to edit the image, it is opening Photoshop (or Illustrator, etc.) from my BACK-UP drive and not within the app on my main drive. So, even tho' I already have Photoshop open as I am working in InDesign, when I try to edit an image it will open up the BACKUP copy of Photoshop AS well I have tried to choose "other" when ctrl-clicking on the image and choosing to edit...but when I navigate over to where Photoshop is on my main drive, I cannot choose the main app because it seems to show the main Photoshop app as a folder with the package contents therein.
How on earth can I correct the path to the correct version of Photoshop where I need to do the editing?? I now have to go about things a roundabout way by navigating to where the image is in the finder (via ctrl-clicking on the image link in the LINKS panel and choosing "show in finder") but this is taking twice as long:(( It wouldn't be so bad if I didn't have as many images I need to work with that I currently do.
Any help or advice will be much appreciated:))
Thank you kindly,
Christine

Just guessing...
Does the problem exist if Photoshop CC on the main drive is open? If not, consider setting it to open when the computer starts up. The active instance might take precedence over the inactive one.
Usually, the last-installed instance of an application is the one that operating systems (OS X & Windows) associate with a document file that calls for the application, for example, when double clicking in Finder/Explorer. It's common to see the newest release invoked (say Photoshop CC rather than Photoshop CS 6) because the newest release is usually the last one installed. Because Adobe CS applications usually install new versions of common files, it's recommended to install releases in chronological order if it's necessary to reinstall applications when there are multiple instances on the same computer. For example, install Photoshop CS4, then CS5, then CS6; if an earlier release is installed when a newer is present, the earlier common file(s) may cause problems for the application. A consequence of this is the normal, but sometimes annoying, behavior that when launching an application by launching one of its files, the newest release is opened because that's how the operating system works.
In your case, it's possible that the operating system sees the backup drive's Photoshop installation as the newest installation, and launches it. Perhaps backing up Photoshop CC makes that instance appear newer to the OS. Consider leaving Photoshop CC out of the backup operation. If that works, fine! If not, you might try starting the computer from the backup drive, running Photoshop, then quitting and restarting the computer from the main drive. If that doesn't fix the problem, perhaps try starting from the backup drive again, then reinstalling Photoshop on it, then restarting from the main drive. If this works, it may "hold," or some operation like backing up, might negate all your smart tricks.
Perhaps one of these strategies may be a permanent fix.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices

Hi I have a macbook pro version 10.6.7 I cant install tunes 12 .and Ihave a i phone4, i cant use it with Itunes 10,,,I delete Itunes10,and now I cant use my Iphone with my macbook cause I don't have the correct version of Itunes

this is my problem ...I have a macbook pro version 10.6.7 and I cant install tunes 12 ....Ihave a i phone4, i cant use it with Itunes 10,,,I delete Itunes10,and now I cant use my Iphone with my macbook cause I don't have the correct version of Itunes,,,what is the version of Itunes i need to install?? i need it for my iphone 4 and my macbook 10.6.7

Run the Software Update pane of System Preferences or click here.
(121029)

Sun Convergence - correct version of GF

Similar Messages

Maybe you are looking for