Sun DS 5.2 SP4 patch upgrade - Cognos environment

We have Cognos v7.3MR2, using bundled Sun Dir. Server v5.2.
We are upgrading to Cognos v7.4, which bundles Sun Dir. Server v5.2 SP4. So, we wish to just patch the underlying Sun DS to v5.2 SP4, and avoid a complete export LAE >> uninstall >> install >> import LAE process.
I read part # 819-4461-10 Sun Java ES Upgrade Guide for MS Windows, and it says that the SP4 patch ZIP (121392-02.zip) is good to get you from SP3 to SP4.
All I know is that the build I have installed today (as part of Cognos v7.3 MR2) is build # 2003.143.0014 (taken from slapd.inf).
THE QUESTION: Can I apply the SP4 patch ZIP to upgrade from that build level of DS v5.2 and achieve SP4 nirvana?
Thanks ...
Tracy Slack

The pstack clearly indicates some contention on a RW Lock, deep in the processing of access controls (and there are only searches).
But it seems that the contention is not a reader / writer lock, but too much concurrent access on the lock queue.
I think you should call Sun support and have them investigate further the issue.
Ludovic.

Similar Messages

7.5M SP4, Patch 4 - client only available through autoupdate

I just installed v 7.5M SP4 Patch 4.
When I installed the clients from the client software center web page, both installations ended with "installation incomplete", but it looked like everything was installed.
I launched the Admin client, and it showed that it was version 7.5.105.03 , not 7.5.104.04. I had autoupdate on, and the system said the client update was available.
I let the autoupdate happen (which actually installed both admin and office clients back-to-back).
This resulted in the correct versions of the client software being installed.
The patch 4 client updates are only packaged in the autoupdate and not in the downloadable clients, which are at patch level 3.

Tony, we are experiencing the same issues. We applied patch 5 to the server and the server installation was fine. But on the client installation, we receive the Installation Incomplete message. We have been working with SAP support for several weeks and they say the patches should be in the client install package and should install successfully.
Did you just proceed with the workaround to install the client and then let the system upgrade the clients when you log in? Have you had any other issues with this patch? Our users do not feel comfortable with this workaround.
Do you have any other ideas on how to resolve this issue?
Thank you.
Ann Florence
Cintas Corp.

Applets not working with Java 1.7.0_51 in MII 14.0 SP4 Patch 5

Hi,
I'm currently evaluating the migration of our MII 12.0 developments to MII 14.
But I'm running in several issues just trying to use simple things like a SQL query template with an iGrid Display template in test mode.
Used versions are: MII 14.0 SP4 Patch 5 and on client side the latest Mozilla Firefox with Java 1.7.0_51
At first I always get a java security warning when the applet is being loaded about unsigned applications.
At second the applet itself is not running. It always shows "No data available" and the java console shows the following errors (iResult is the id of the applet):
iResult [ERROR] - Couldn't set query template: No Query Defined
iResult [ERROR] - Couldn't set display template: null
iResult [ERROR] - Couldn't set display template: null
Is this perhaps a general problem, that the MII applets are not working with Java 1.7.x versions?
If I call the same MII page from a client with Java 1.6.x it is working without errors.
Do you have some suggestions for me?
Regards Timo

please clear your JAVA Cache. that should solve the JRE issue. thanks

Kernel Patch upgrade results into error

Recently, we upgraded our R/3 640 kernel from patch number 196 to 327. It went successful.
But now, the Sales and order team is having problem in saving the orders(VA02, VA01).
While saving Sales order, error pops up saying "dialog step number missing".
Kindly suggest.

Hi ppl,
The problem has been resolved.
As i said, problem wasnt with the upgrade, but came thereafter, functional team faced issues while switching between the windows.
Problem was with the Gui level, it needed to be upgraded too after the kernel patch upgrade.
Thanks a lot for putting your thoughts.
Thanks

System Core Dumped after Oracle patch upgrade 9.2.0.6 to 9.2.0.8

Hi,
We are continously getting dumps on our BW Central instance server after we did an Oracle patch upgrade from 9.2.0.6 to 9.2.0.8.
Following is our system environment
SAP Release.............. "640"
Application server....... "abci"
Operating system......... "SunOS"
Release.................. "5.10"
Hardware type............ "sun4v"
Database server.......... "abdb"
Database type............ "ORACLE"
Database name............ "ABP"
Database owner........... "SAPABP"
SAP kernel............... "640"
Database version......... "OCI_920 "
Patch level.............. "175"
Following below is the Core Dump that is generated for any process chains that we schedule on our BW server
Runtime Errors         SYSTEM_CORE_DUMPED
Date and Time          14.04.2008 09:26:17
ShrtText
     Process terminated by signal 11.
What happened?
    The current ABAP program had to be terminated because the
    ABAP processor detected an internal system error.
    The current ABAP program "SAPMSSY2" had to be terminated because the ABAP
    processor discovered an invalid system state.
What can you do?
    Make a note of the actions and input which caused the error.
    To resolve the problem, contact your SAP system administrator.
    You can use transaction ST22 (ABAP Dump Analysis) to view and administer
    termination messages, especially those beyond their normal deletion
    date.
Error analysis
    An SAP System process was terminated by an operating system signal.
    Possible reasons for this are:
    1. Internal SAP System error.
    2. Process was terminated externally (by the system administrator).
               Last error logged in SAP kernel
    Component............ "Taskhandler"
    Place................ "SAP-Server awci_ABP_00 on host awci (wp 5)"
    Version.............. 1
    Error code........... 11
    Error text........... "ThSigHandler: signal"
    Description.......... " "
    System call.......... " "
    Module............... "thxxhead.c"
    Line................. 9780
How to correct the error
    The SAP System work directory (e.g. /usr/sap/c11/D00/work ) often
    contains a file called 'core'.
    Save this file under another name.
    If you cannot solve the problem yourself and you wish to send
    an error message to SAP, include the following documents:
    1. A printout of the problem description (short dump)
       To obtain this, select in the current display "System->List->
       Save->Local File (unconverted)".
    2. A suitable printout of the system log
       To obtain this, call the system log through transaction SM21.
       Limit the time interval to 10 minutes before and 5 minutes
       after the short dump. In the display, then select the function
       "System->List->Save->Local File (unconverted)".
    3. If the programs are your own programs or modified SAP programs,
       supply the source code.
       To do this, select the Editor function "Further Utilities->
       Upload/Download->Download".
    4. Details regarding the conditions under which the error occurred
       or which actions and input led to the error.
Kindly help.
Regards
Sachin
Edited by: Sachin N on Apr 14, 2008 12:26 PM

No. If the environment would be wrong the system wouldn´t start up.
Core dumps are in 99 % of the cases program errors (in the SAP kernel or in an interface (libdbora*)), misaligend accesses of data etc.
If you encounter such an error have a look in the C-Stack. If you can´t see where the error is happening opening an OSS call. Most of those errors are fixed by installing the latest patches for the kernel and the database interface.
Markus

10.2.0.2 Patch Upgrade issue

hi,
SAP was installed on 10.2.0.1 (SuSe Linux Ent 10 ) . now i am applying patch upgrade to 10.2.0.2. when i am doing patch the below problem was occured,
"Unable to create new central inventory at location /oracle/orainventory. A non empty inventory already exists at this location. Please select another location or clean the inventory at /oracle/orainventory."
please help me on this issue
Regards
Ramesh

Hai,
Please check the oraInst.loc file has the correct entry or not.
File oraInst.loc should have the entries similar to the below:
inventory_loc=/oracle/SID/oraInventory
inst_group=dba
Check the permissions of this file as well, atleast the file should have read access to others.
Also check the permissions of /oracle/SID/oraInventory, it should be owned by ora<sid> user and group dba.
Regards,
Yoganand.V
Edited by: Yoganand Vedagiri on Feb 23, 2009 12:05 PM

How to do patch upgradation in citrix server ?

Dear all,
How to do patch upgradation in citrix server (SAP B1 2005B PL41 to PL49) ?
Whether i also need to do same in db server ?
Jeyakanthan

Hi Jayakanthan,
Patch Upgrade is done on SAP Server only.After Completion of Patch 49 upgrade in SAP Server
then open SAP B1 in server machine it start to upgrade DB after completed DB Upgrade
In Citrix Server open the SAP B1 it start the upgrade process after completed
restart the citrix server.
There is no separate Patch instalation in citrix server.
in Citrix server SAP client only installed so you can just open the
SAP B1 in citrix server and other client machine also it automatically start to
upgrade.
*Close the thread if issue solved.
Regards
Jambulingam.P

Patch / Upgrade

Hello,
I was looking into patching/upgrading from 10.2.0.3 to a 10.2.0.5 verison.
Are the two zip files for 10.2.0.5 from http://www.oracle.com/technology/ "Patch Installers"
The same as Patches from Metalink ?
Please explain the difference.
Thanks..

Hello,
I found out they would be the same. I was looking for more of a general answer not specfic to a product like what is "Patch Installers"
The two zip files I want are for 10.2.0.5 from http://www.oracle.com/technology/software/products/oem/index.html "Patch Installers"
are the same as Patch 3731593 from Metalink.
I thought the patch would only be from Metalink.
Thanks..

Best Practice: SAPGUI Version and Patch Upgrades

Hello -
Does anyone have some thoughts/information on best practices relating to SAPGUI version and patch upgrades.
Obviously, sometimes upgrades are forced upon us (e.g. 7.10 for Vista) and in other cases it may just be considered "nice to have".
Either way - it always signifies regression test and deployment effort. How do we balance the benefit and cost?
Thanks, Steve

Hi Steve,
you're right for the first part, yes, we (usually) patch twice a year.
Now for the rest
An uninstall will only happen on release changes (6.20->6.40->7.10), i. e. about every 4-5 years as SAP releases them.
Patches are applied to the installation server and the setup on the client will only update changed program parts. For example, upgrading 6.40->7.10 took about 10 minutes (incl. uninstall), applying patch 1 less than 5 minutes.
I recommend, you read the "SAP Frontend Installation Guide - 7.10" which you find at SMP alias sapgui. Navigate to Media Library - Literature. It explains setup of the installation server (sounds like a big thing, but ain't much more than creating a share), creating packages, applying updates etc.
Peter
Points always appreciated

Backup error after kernel patch upgrade

Hi.
I have a backup problem after the kernel patch upgrade. I have SAP R3 4.6C on HPUX11.0 with an Oracle 8.17 database.
I have upgraded kernel patch from 1655 to 2337.
Afterward, I am getting following backup error:
BR280I Time stamp 2007-11-06 09.29.01
BR279E Return code from '/usr/sap/HAD/SYS/exe/run/backint -u HAD -f backup -i /oracle/HAD/sapbackup/.bdwnpztp.lst -t file_online -c': 2
BR232E 0 of 115 files saved by backup utility
BR280I Time stamp 2007-11-06 09.29.01
BR231E Backup utility call failed
Does anyone know how to correct this?
Thank you.

Hi Jun,
backint is a link file that is in SAP kernel directory which links to the backup client on the server.
eg:
lrwxrwxrwx 1 root other 32 Aug 13 2004 backint -> /usr/openv/netbackup/bin/backint
As part of kernel upgrade process, the kernel is backed up, mostly on the disk before upgrading. Check if this link exists and recreate it in the kernel directory, if no backup was done, compare it with other systems to get the details of the backint link.
Cheers,
Nisch

Delta links on applying patches/upgrade.

Hi,
I have a basic question. What happens on applying patch/upgrade to the delta linked copies, when the source objects have been updated/upgraded with new SAP changes.
Will the delta linked object properties get over written by new upgraded (or SAP patches) source objects.
I have made delta links of the SAP delivered WPC IView container objects and using them in the custom pages. Lets say on applying a patch or upgrade, the orginal source objects are changed. Will those changes undo my changes on target delta linked objects.

Hi,
Copying to your namespace is possible but by that you loose all the advantages in the delta-link.
What exactly are you copying Roles, iView, Pages everything?
Adding additional delta link layer between the roles and SAP content is a wise step but copying everything will only dupplicate content and will not allow you upgrade safty with SAP features.
Regards, Elisha
PCD Team Leader
SAP

Update Customized LKM after patch upgrade

We currently have over 100 interfaces that use a customized version of a default LKM,CKM and IKM. We are going to implement a patch upgrade over the weekend which includes new versions of the LKM,CKM and IKM. How do we apply the new versions to the 100 interfaces?
The customization that we had done was to modify the some of the options. When we receive a new version how do we apply the new KM with the customized options to all the interfaces?
Thank you in advance.

Best paractise is always to dulicate then modify the new KM, not to modify the original KMs. This allows you to deal with the issues which arise when new KMs are released which contain new functionality you'd like to get.
I suggest that your best approach is to import the new KMs, modify them with your changes, then export them. Next do an IMPORT REPLACE on your KMs with the modified version of the new ones. Now all you have to do is to re-generate the interfaces which use the KMs.

Adjustment Modifications after Patch upgrade?

Hello,
Is it possible that the Modifications Adjustments (done in SPAU and SPDD and occured due to SAP_BASIS and SAP_ABA patches) be carried out after the patches upgrade?
To be more clear, instead of Adjusting the Modifications while patch upgrade is in progress can i configure the patch upgrade in SPAM transaction someway that the Modification Adjustments is directly shown to the user upon their login after my patch upgrade?
Regards,
Vasu

Hi Vasu,
Yes you just need to transport the request to next system.
Than you don't need to redo the adjustment.
But some time due to incosystency between the system, you still get some object not adjusted after you apply the request, and for this you need to transport the object from your development or direct adjust.
After 12 days than when you change the object, SAP will ask you for the object key, and you need to request the key in SAP MarketPlace before you can change the object.
Regards,
Fendi Suyanto

Patch upgrade in Source system ECC 6

Hi,
We are plannig Patch upgrade in the ECC 6 r/3 System. This is source system for BI7 (NW2004s).
I want to know, we beibg a BI consultant
1. What we need to check in ECC on patch upgrade.
2. What precautions we need to take for better facilitating the patch upgrade in ECC 6
3. Other related things.
can someone please reply.

Hi
check patch level in BI system :---
Logon to your SAP System
SYSTEM>STATUS>Click the search buttion under SAP System Data
Where you can find your patchelev.
BI Content and Plug-in Information
These are the links to get detailed information about BI Content and Plug-in.
Check the release notes in this link:
http://help.sap.com/saphelp_nw70/helpdata/en/bc/52a4373f6341778dc0fdee53d224c8/frameset.htm
Dependencies of BI_CONT Add-Ons: Functional Correspondences
https://websmp207.sap-ag.de/~sapdownload/011000358700007362962004E/func_corresp.htm
Dependencies of BI_CONT Add-Ons: Technical Prerequisites:
https://websmp207.sap-ag.de/~sapdownload/011000358700007362972004E/tech_prereq.htm
BI Extractors and Plug-in Information:
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000682135&
http://sap.seo-gym.com/copa.pdf
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
/thread/178564 [original link is broken]
Asset Mgt Data
http://gnanamax.com/Documents/BI%207.0%20Functional%20Upgrade%20-%20Migration%20points.pdf
/thread/507115 [original link is broken]
Go to sap logon pad on the top left side of the logon pad u can see a small click option beside the logon gui for eg: sap logon710 or 640. click on that and select about sap logon there u can c the patch level, build, file name, file version etc,
Hope it helps
regards
gaurav

Patch Upgrade - Urgent

Hi Friends
We are upgrading patches on our bw machines.We are on patch level 19.Now moving to 21.
I just want to know what kind of testing do we need to do after patch upgrade?
Please give me some thoughts with this regards.
Regards,
Chama.

Hi,
it is recommended that to use latest kernel patch and database patch if available,
you need to perform this operation on first Development system than to QAS and PRD
after applying such patch you need to check that sap server is start without problem, check for database,
such tranasaction is tested by other people like functional/end user may run there tcodes and test it
regards,
kausahl

Sun DS 5.2 SP4 patch upgrade - Cognos environment

Similar Messages

Maybe you are looking for