Sun E250 blank Screen... Need help
Hi everyone,
Currently I have moved my E250 server back from my customer site. It was working last week and now when I tried to power up it does not reach the Open Boot prompt.
I will start with the LED light located on the front panel. Only the green light which is the power light is on. Normally there an amber light that will blink that which the machine will work fine. Now that light does not blink at all.
Also there is other LED fault light that appear like powersupply, hardisk and room tempearture.
Therefore need helps from any gurus here. Do you think is there any component that was loose inside the system like memory or CPU ? If so I believe the LED light will appear as fault which now it has none.
Thanks...
Regards
Jeremy
Email : jktlee@tm.net.my
I did OBP upgrade. Problem is still there and I don't see anything in the DIAG.
=====================
crmyulsrv:/# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/vx/dsk/rootvol 5445200 4484851 905897 84% /
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
swap 5885304 0 5885304 0% /var/run
crmyulsrv:/#
Fatal Reset
SC Control: 0000.0000.0200.0000
SC CP0 CFG: 0000.0000.0100.4000 STS: 0000.0000.c1e0.0000
SC CP1 CFG: 0000.0000.0100.4000 STS: 0000.0000.01e0.0000
SC CP2 CFG: 0000.0000.0100.4000 STS: 0000.0000.01e0.0000
SC CP3 CFG: 0000.0000.0100.4000 STS: 0000.0000.01e0.0000
SC P1F CFG: 0000.0000.0110.4000 STS: 0000.0000.0100.0000
SC P06 CFG: 0000.0000.0110.4000 STS: 0000.0000.0100.0000
SC P04 CFG: 0000.0000.0110.4000 STS: 0000.0000.0100.0000
SC SIFault: 0000.0000.0000.0000
CPU AFSR: 0000.0001.a801.0000 AFAR: 0000.01ff.f150.0000
CPU UDBH: 0000.0000.0000.0000 UDBL: 7fff.f37e.0100.0000
P@1F Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ff00.2000.0000 AFAR: 0000.01fe.0000.b008
CE AFSR: 0080.ff00.2000.0000 AFAR: 0000.01fe.0000.b008
P@06 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ff00.2000.0000 AFAR: 0000.01cc.0000.b008
CE AFSR: 0080.ff00.2000.0000 AFAR: 0000.01cc.0000.b008
P@04 Ctrl: 04f8.0000.0000.0000
UE AFSR: 0000.ff00.2000.0000 AFAR: 0000.01c8.0000.b008
CE AFSR: 0080.ff00.2000.0000 AFAR: 0000.01c8.0000.b008
CPU0 has assumed the role of Boot CPU
@(#) Sun Ultra 450 3.30 Version 0 created 2003/11/11 10:41
Online: CPU0 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU1 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU2 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Online: CPU3 Ultra-II (v10.0) 4:1 4096KB 2-2 ECache MCap 7
Motherboard DTAG SRAMs support up to 8192KB of ECache per CPU Module
Setting system ECache size to 4096KB
Clearing DTAGS...Done
Auxio Level = 0000.0000.0000.000f
Clearing E-Cache Tags...Done
Clearing I/D TLBs...Done
Probing Memory...Done
HiMem base = 0000.0000.8000.0000 size = 0000.0000.4000.0000
Clearing Memory...Done
MMUs ON
Copying ROM to RAM...Done
RAM CRC = 0000.0000.4267.f1bc; ROM CRC = 0000.0000.4267.f1bc
Decompressing into Memory...0000.0000.0004.4ec0 (276KB)...Done
Size = 0000.0000.0008.4a70 (531KB)
Starting Forth kernel at 0000.0000.f005.9dbc
ttya initialized
Memory in 1 - way interleave configuration
...Bank #0 256 + 256 + 256 + 256 : 1024 MB [Available 1024MB @ 0 ]
...Bank #1 256 + 256 + 256 + 256 : 1024 MB [Available 1024MB @ 40000000 ]
...Bank #2 256 + 256 + 256 + 256 : 1024 MB [Available 1024MB @ 80000000 ]
...Bank #3 0 + 0 + 0 + 0 : 0 MB
Programming memory controller for 10ns/100MHz UPA timing
Environmental monitor: enabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 2 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk tape
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 pci
Probing /pci@1f,2000/pci@1 at Device 0 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4 Nothing there
Probing /pci@1f,2000/pci@1 at Device 5 Nothing there
Probing /pci@1f,2000/pci@1 at Device 6 Nothing there
Probing /pci@1f,2000/pci@1 at Device 7 Nothing there
Probing /pci@1f,2000/pci@1 at Device 8 Nothing there
Probing /pci@1f,2000/pci@1 at Device 9 Nothing there
Probing /pci@1f,2000/pci@1 at Device a Nothing there
Probing /pci@1f,2000/pci@1 at Device b Nothing there
Probing /pci@1f,2000/pci@1 at Device c Nothing there
Probing /pci@1f,2000/pci@1 at Device d Nothing there
Probing /pci@1f,2000/pci@1 at Device e Nothing there
Probing /pci@1f,2000/pci@1 at Device f Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 4 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 Nothing there
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
Can't open input device.
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Keyboard not present. Using ttya for input and output.
Memory in 1 - way interleave configuration
...Bank #0 256 + 256 + 256 + 256 : 1024 MB [Available 1024MB @ 0 ]
...Bank #1 256 + 256 + 256 + 256 : 1024 MB [Available 1024MB @ 40000000 ]
...Bank #2 256 + 256 + 256 + 256 : 1024 MB [Available 1024MB @ 80000000 ]
...Bank #3 0 + 0 + 0 + 0 : 0 MB
Programming memory controller for 10ns/100MHz UPA timing
Environmental monitor: enabled
Probing Floppy: drive detected on ID0
Probing Audio: audio codec not present
Primary UPA probing
Probing all UPA slots ................................Done.
At UPA Slot 0 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 1 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 2 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 3 Created Node(s)...SUNW,UltraSPARC-II
At UPA Slot 4 Created Node(s)...pci pci
At UPA Slot 6 Created Node(s)...pci pci
At UPA Slot 1f Created Node(s)...pci pci
Primary I/O probing
Probing /pci@1f,4000 at Device 1 network
Probing /pci@1f,4000 at Device 3 scsi disk tape
Probing /pci@1f,4000 at Device 2 scsi disk tape
Probing /pci@1f,4000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 0 This slot excluded from probing...
Probing /pci@1f,2000 at Device 1 pci
Probing /pci@1f,2000/pci@1 at Device 0 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 1 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 2 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 3 pci108e,1000 SUNW,qfe
Probing /pci@1f,2000/pci@1 at Device 4 Nothing there
Probing /pci@1f,2000/pci@1 at Device 5 Nothing there
Probing /pci@1f,2000/pci@1 at Device 6 Nothing there
Probing /pci@1f,2000/pci@1 at Device 7 Nothing there
Probing /pci@1f,2000/pci@1 at Device 8 Nothing there
Probing /pci@1f,2000/pci@1 at Device 9 Nothing there
Probing /pci@1f,2000/pci@1 at Device a Nothing there
Probing /pci@1f,2000/pci@1 at Device b Nothing there
Probing /pci@1f,2000/pci@1 at Device c Nothing there
Probing /pci@1f,2000/pci@1 at Device d Nothing there
Probing /pci@1f,2000/pci@1 at Device e Nothing there
Probing /pci@1f,2000/pci@1 at Device f Nothing there
Probing /pci@1f,2000 at Device 2 Nothing there
Probing /pci@1f,2000 at Device 3 Nothing there
Probing /pci@1f,2000 at Device 4 Nothing there
Probing /pci@1f,2000 at Device 5 Nothing there
Probing /pci@6,4000 at Device 0 This slot excluded from probing...
Probing /pci@6,4000 at Device 1 Nothing there
Probing /pci@6,4000 at Device 2 Nothing there
Probing /pci@6,4000 at Device 3 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 4 scsi disk tape scsi disk tape
Probing /pci@6,4000 at Device 5 Nothing there
Probing /pci@6,2000 at Device 0 This slot excluded from probing...
Probing /pci@6,2000 at Device 1 Nothing there
Probing /pci@6,2000 at Device 2 Nothing there
Probing /pci@6,2000 at Device 3 Nothing there
Probing /pci@6,2000 at Device 4 Nothing there
Probing /pci@6,2000 at Device 5 Nothing there
Probing /pci@4,4000 at Device 0 This slot excluded from probing...
Probing /pci@4,4000 at Device 1 Nothing there
Probing /pci@4,4000 at Device 2 Nothing there
Probing /pci@4,4000 at Device 3 Nothing there
Probing /pci@4,4000 at Device 4 Nothing there
Probing /pci@4,4000 at Device 5 Nothing there
Probing /pci@4,2000 at Device 0 This slot excluded from probing...
Probing /pci@4,2000 at Device 1 Nothing there
Probing /pci@4,2000 at Device 2 Nothing there
Probing /pci@4,2000 at Device 3 Nothing there
Probing /pci@4,2000 at Device 4 Nothing there
Probing /pci@4,2000 at Device 5 Nothing there
Sun Enterprise 450 (4 X UltraSPARC-II 400MHz), No Keyboard
OpenBoot 3.30, 3072 MB memory installed, Serial #11954957.
Ethernet address 8:0:20:b6:6b:d, Host ID: 80b66b0d.
Initializing 1 megs of memory at addr bfeb6000
Initializing 1 megs of memory at addr bfe00000
Initializing 2 megs of memory at addr bfc02000
Initializing 12 megs of memory at addr bf002000
Initializing 3056 megs of memory at addr 0
{0} ok
======================
{0} ok printenv
Variable Name Value Default Value
tpe-link-test? true true
scsi-initiator-id 7 7
keyboard-click? false false
keymap
ttyb-rts-dtr-off false false
ttyb-ignore-cd true true
ttya-rts-dtr-off false false
ttya-ignore-cd true true
ttyb-mode 9600,8,n,1,- 9600,8,n,1,-
ttya-mode 9600,8,n,1,- 9600,8,n,1,-
pci-slot-skip-list none none
pci0-probe-list 1,3,2,4 1,3,2,4
upa-port-skip-list none none
memory-interleave auto auto
disk-led-assoc 0 0
diag-level max min
diag-script normal normal
diag-targets none none
diag-trigger power-reset power-reset
diag-continue? false false
diag-passes 1 1
diag-verbosity verbose tests
env-monitor enabled enabled
mfg-options server
#power-cycles 88
system-board-serial# 947H440A
system-board-date 38458a32
fcode-debug? false false
output-device screen screen
input-device keyboard keyboard
load-base 16384 16384
boot-command boot boot
auto-boot? false true
auto-boot-on-error? false false
watchdog-reboot? false false
diag-file
diag-device net net
boot-file
boot-device disk:a disk1:a disk net disk net
local-mac-address? false false
ansi-terminal? true true
screen-#columns 80 80
screen-#rows 34 34
silent-mode? false false
use-nvramrc? false false
nvramrc devalias vx-rootmirror / ...
security-mode none
security-password
security-#badlogins 4096
oem-logo
oem-logo? false false
oem-banner
oem-banner? false false
diag-switch? true false
======================
Message was edited by:
Jpeda
Similar Messages
-
my iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.
Intel-based Macs: Resetting the System Management Controller (SMC)
-
my screen is completely white, i've tried holding lock and home buttons as seen on you tube something called 'white screen of death' its goes black (think it switches off) then back to the white screen need help fast please!
If you have not done a factory reset on the device, I recommend doing a complete factory reset.
Factory Reset - Warning this will reset device back to original factory settings.
This method will not erase any MDN/MIN information
Turn off the phone
Press Power + Volume Up/Down at the same time and hold until display will show a triage android screen
Display will show:
Reboot system Now
Apply sdcard:update.zip
Wipe Data/Factory Reset
Wipe Cache Partition
Use VOL Down key to scroll down to "Wipe Data/Factory Reset", press home icon to select option and wipe device.
Display shows "All user data will be wiped out", press VOLUME Up to continue or VOLUME Down to exit.
Press Volume Up
Press Home to select "Reset System Now" - device will reboot
If the problem persist I recommend having a store technician take a look at the device.
Copy and paste the link below into your browser's address bar for the store locator.
http://www.verizonwireless.com/b2c/storelocator/index.jsp -
i can't sign in to game center in the mac i type i the password and it takes me to a black green screen i need help?
I have the same problem on my Mac OS X V 10.9.5. and its just 1 month old.
have tried almost everything. But it looks like it's on Apple's side because there are other people with other devices (Iphone & Ipad) having the same problem.
screenshot: -
I reformatted my ipod to windows and now I get a blank screen. Help!
My brother gave me his old Ipod 30Gb, I believe it's an IPOD Classic. When I first connected it to my PC I got a message that it needed to get reformatted to Windows, so I did that. After that when the IPOD came back on it had a blank screen. I tried holding down the menu + center button also but that did not work.
I also tried running the diagnostics on iTunes and failed on the Device Sync Test. I can see the music on the IPOD but they are greyed out and it won't play. But if I attach the earbuds I can hear the songs, but again the screen is blank.
Thank you for any assistance you can give.Difficult to comprehend your post.
" I can see the music on the IPOD but they are greyed out and it won't play. But if I attach the earbuds I can hear the songs, but again the screen is blank"
Especially these parts
that you can see the music but the screen is blank?
it wont play but you can hear the songs.
Just a wild guess, your battery is low, connect it to the PC for 4 hours, then Reset the iPod. (Menu+center button
till the Apple logo comes ON)
Tenga un buen día -
Why is my text messaging app is not working at all, is a blank screen? Help!!!
My text messaging app is not working at all is a blank screen when I open it! Help!!!
Abdussalam.A,
you mentioned that Terminal does not work at all for your MacBook Pro. What currently happens when you run Terminal? In what way does it not work? -
Ok so last night i went for a shower left my phone on my bed. i came back to find a blank screen keypad still lit up i restarted it and still the same problem redlight for a cupple of seconds keypad lights up phone vibrates when loaded but screen just stays black hellllppppp
Hi crikle1992,
To rule out any possible software issue that may be causing this, I would suggest backing up and doing a clean reload of your BlackBerry® Device Software.
The following KB articles provide more instructions.
For Windows®: "How to perform a clean reload of the BlackBerry Device Software for Windows" http://bbry.lv/GI9beY
For Mac: "Perform a clean reload of BlackBerry smartphone application software using BlackBerry Desktop Software on a Mac computer" http://bbry.lv/J0UN1U
Hope this helps.
-FS
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.
Click Solution? for posts that have solved your issue(s)! -
Question
I'm using a macbook and recently cant access my Hotmail account. Normally it comes up as my home page. The address bar shows what looks like my account but a blank screen.
I have disabled Silverlight after seeing that suggested somewhere. That didnt help.Clear the cache and the cookies from sites that cause problems.
* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites causing problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
See also:
* [[Troubleshooting extensions and themes]] -
Stuck grey screen, need help asap!
Alright,
so I was trying to reinstall some programs by using the Startup Disk 1.
I relized how long it was taking, and quit at an early point.
I chose to restart the computer (I've done it before, and it just went back to our normal screen)
But this time around,
It went to a blank white screen,
several minutes later, a blinking globe appeared
and then a minute or two later, the blue startup screen appeared,
then turned grey,
and that's where it's been ever since.
I have NO idea how to fix this.
I've looked everything up from this other computer,
and I am pretty much desperate to get the computer fixed ASAP
PLEASE,
hah I need answers quick
Thank you so much!!!Hi Nicole-
Don't be freaked out- it doesn't help. You need to be cool, calm, and methodical.
So, you have an iMac? Anyhow, a slot loading optical drive....
Check your keyboard. Is it plugged in?
If you are using a wireless keyboard, change to a USB plug in type for now. If you are using a wireless, this would be why previous keyboard commands didn't work.
With the OS install disc in the machine, and with the machine off (hold the power button for several seconds to make sure it turns off). Startup the Mac, and hold the C key while starting. Hold the key until you see the gray spinning wheel stop spinning. The machine should boot to the OS X install disc.
Once booted to the OS install disc, either, repair the hard drive with Disk Utility, or, Archive and Install, saving user settings.
BTW-We aren't arguing, just establishing from where the others thinking is based. Of no consequence to you, except that we are both trying to help.
Remember, cool, calm, methodical. -
i accidently downloaded something as i opened a site. it now means i cannot use safari because everytime i try to open it, it just goes to a blank black page and wont let me do anything. what can i do? please help! my iphone is either a 3G or 3GS?
You cannot get a virus on an iPhone unless it is jailbroken. The site you displayed may be corrupt, however. Press the HOME button if not on the HOME screen, then press it again. Hold your finger on the Safari app that appears in the recently used ribbon, then tap the "-" to close it. Next go to Settings/Safari and tap Clear History, then Clear Cookies and Data.
-
Imac g4 blue screen need help!!
hello,
i have an imac g4 1,250, 20" flatpanel, it power's up i hear a chime the screen lights up but seems dark blue, there is no operating system on it i have a cd mac osx 10.1.3 first of all will this install on the imac, and if so can you please tell me how, i have a wireless keyboard and mose from apple, i have a d-link bluetooth adapter, is this what i need??
thats it for now, please help
thank you
keyro35
imac g4 Mac OS X (10.1.x)Mr Totes is quite right, the 10.1.3 disk will not work. Contact the original seller for the disks that came with the machine. Among other things, they can be used to troubleshoot problems with the machine should they arise (chances are they won't but they can be useful, especially in detecting if the RAM usable and other factors). They are not rightfully his when he sells the machine and ONLY licensed for use with that machine. If he lost the disks, he should call AppleCare for replacements.
Once you have identified which iMac you have from my FAQ:
http://www.macmaps.com/macosxnative.html#IDENTIFY
You’ll have the knowledge necessary to call AppleCare and request the disks yourself if you can’t reach the seller. This knowledge is also important later on.
If you can reach him, the number he should contact is one from his own country.
In Canada, the number for AppleCare is
1-800-263-3394
In the U.S. it is:
1-800-APLCARE
Overseas numbers are here:
http://www.apple.com/contact/phone_contacts.html
Make sure you get the correct RAM according to the spec database based on the Mac model identified above:
http://www.info.apple.com/support/applespec.html
and update it to at least 512 MB if not 1 GB. The installation if necessary is best done by an authorized service technician, especially on the iMac G4 models since those RAM slots tend to be quite fragile. Run the hardware test that came with the restore disks. Some come with their own Hardware Test CD that is silver colored, while others come with a volume like the Powerbook, except labeled iMac restore disk. The restore disk instructions for the Powerbook apply to iMacs as well:
http://docs.info.apple.com/article.html?artnum=86287
If the hardware test appears OK, you’ll be ready to run the Tiger installation with an erase and install:
http://docs.info.apple.com/article.html?artnum=301270
And everything then should work.
Good luck, and let us know if you get stuck along the way!
In the future always be careful when buying used and refurbished Macs, by following these instructions in my FAQ:
http://www.macmaps.com/usedrefurbished.html -
HP Pavilion a6000 desktop with Vista black screen - need help please!
I have an HP Pavilion a6000 desktop with Vista. Yesterday it was working fine and today we have the black screen that reads:
Award BootBlock BIOS v1.0
Copyright (c) 2000, Award Software, Inc.
BIOS ROM checksum error
Detecting IDE ATAPI device...
Found CDROM, try to boot from it...Fail
Detecting IDE ATAPI device...
Detecting IDE ATAPI device...
Detecting floppy drive A media...
Drive A error. System halt
I am not a techie, but looked at online forums and have tried f10 at startup with no change to the screen other than it stops after the first four lines and does not try the floppy drive. I also pulled out the round battery, waited and then reintstalled. Same problem.
Also, computer emits a single, repeating beep after startup.
HELP!jjeahall
I saw your post and wanted to comment. I'm not an expert on these types of situations but did some digging around and found the following at Tips4PC.com.... read below
"There are two types of computer black screens that can appear in Windows. One where the computer will not boot up but you have a beep sequence sounding to let you know what the problem could be, and the other has nothing at all. No beeps, no cursor, no logo screen, and no choice to boot to safe mode or access the bios.
If your computer will not boot up and you get a beep sequence, I am not saying it is good news, however it is a step in the right direction towards solving this problem. This is a message from your computer that can be understood by looking up your bios (the brand) beep code. For example you may have an Award Bios, Ami Bios, Phoenix BIOS, Compaq, Dell, or Acer Bios. This list goes on and on. You can search for Bios beep codes in Google. Here is an example of results in Google search"
Link
Also I went into the Troubleshooting Guide for the A6000 and found the following information. You need to use F11 for recovery. See below
Starting System Recovery from system startup
1
Turn off the computer. If necessary, press and hold the On button until the computer
turns off.
2
Remove the HP Personal Media Drive if your computer includes one. Disconnect all
peripheral devices from the computer except the monitor, the keyboard, and the
mouse.
3
Press the On button to turn on the computer.
4
During the startup, do the following to enter the Recovery Manager program:
When the blue screen with the HP Invent logo appears, press the F11 key on the
keyboard. (You have only a few seconds to press the F11 key before the normal
startup process continues.)
5
The computer starts the Recovery Manager program; wait for the onscreen instructions
to display, and then follow those instructions.
6
Complete the computer startup, finish the registration process, and wait until you see
the desktop. Then, turn off the computer, reconnect all peripheral devices, and turn on
the computer.
I am an HP employee.
Regards,
Cooper56
If you’ve found this information helpful, please make it easier for others who might be experiencing a similar type issue by marking my answer as “Accept as Solution” .
***Of course you can also Click on “Kudos” STAR to say thanks!***
I work for HP. When your problem has been solved, accept the solution by clicking the "Accept as Solution" button to help other members in the future! -
Zen Micro just has a lit but blank screen? Help me pleas
I bought a 6 GB Zen Micro for my daughter for Xmas last year and now (not sure for how long but I guess several months) the battery does not seem to hold any charge and it will not turn on unless connected to a USB port. When I connect the player to an USB port the screen lights up, I get the Creative copyright screen for a second and then the screen is lit & blank except for the batter icon up top which has a flashing lightning bolt inside. The screen remains lit and that is about it. It stays lit for ever it seems, or at least until I unplug it. But even after that it will not turn on at all.
There is only one thing I can get the player to do but only when plugged into a usb port. If I hold the power button down for 5 seconds I get the Creative copyright screen followed by the Recover mode screen. I can select an option from the recovery mode and start the option but the screen eventually goes blank and dark.
Don't know what is wrong nor what to do.
It might be the battery, might be the player itself, don't know.
Any help is appreciated please.
Should also note that when connected to a usb port and my computer is on then Windows XP notices the Zen Nano as new hardware.
Thanks
forthillI bought a 6 GB Zen Micro for my daughter for Xmas last year and now (not sure for how long but I guess several months) the battery does not seem to hold any charge and it will not turn on unless connected to a USB port. When I connect the player to an USB port the screen lights up, I get the Creative copyright screen for a second and then the screen is lit & blank except for the batter icon up top which has a flashing lightning bolt inside. The screen remains lit and that is about it. It stays lit for ever it seems, or at least until I unplug it. But even after that it will not turn on at all.
There is only one thing I can get the player to do but only when plugged into a usb port. If I hold the power button down for 5 seconds I get the Creative copyright screen followed by the Recover mode screen. I can select an option from the recovery mode and start the option but the screen eventually goes blank and dark.
Don't know what is wrong nor what to do.
It might be the battery, might be the player itself, don't know.
Any help is appreciated please.
Should also note that when connected to a usb port and my computer is on then Windows XP notices the Zen Nano as new hardware.
Thanks
forthill -
Ipod stuck and froze, now has blank screen! HELP!
I was playing on an app and all of a sudden my screen froze. Even though it froze I still was able to touch and somewhat play the game, but i couldn't return to the home screen. I was able to get to the music/song section by double clicking the home button but it was still frozen. I also followed directions on how to restart my ipod but it only made it worse by leaving me with an unusable blank white screen.Not only that but I tried plugging it into my computer with the USB but nothing came up & I wasn't able charge it.
HOW CAN I FIX THIS????
I HAVE A ROAD TRIP TOMORROW AND I NEED THIS IPOD FOR IT!
Message was edited by: allstarchris94
Message was edited by: allstarchris94the freezing happenings to me a lot but all i do is restore it is like the home button stopped working but u could still get to music u should have restored it when it first happened if it shows up in itunes restore it
-
Ipod touch with white screen need help
what would cause a white screen on my ipod touch 4th gen ?? i would like to know i have already tried to reset it and it has not worked. I also restored it and every thing works but the screen its always white. i need some help please!
If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar
Maybe you are looking for
-
When I get a text while the phone is locked it doesn't make the designated alert sound, but it does if the phone is unlocked and in use.
-
MS-Word mail merge funcionality
I would like to have an editor with functionalities similar to MS-Word's mail merge. My website should be able to publish templates with dynamic data, from an external database. Can I have it with Muse or any other Adobe product ?
-
Hi, I'm using Oracle JDeveloper 11.1.2.2.0 and the eclipselink JPA provider (integrated in Toplink library). I can run my web application in IDE. However, when I deployed my application to the embedded WLS via a WAR file, I got the following error: E
-
.Mac 'Personal Domain' and Aperture Galleries?
hi all. I have a personal domain www.gregory.hk and I've arranged with my DNS guys to set up a subdomain gallery.gregory.hk with the CNAME pointing to web.mac.com I'm getting two impressions from searches I've done on Apple: 1. personal domains only
-
HELP - Oracle Database 10g Express Edition
Hi, I have a Athlon XP 2000 1.6 Ghz 512 MB Ram. I installed Database 10g XE. After installing, my computer (Windows) is taking more time to initialize. As i've noticed, it's possible to shut down the database. But when i initialize my computer again,