Sun FastEthernet PCI with MII and x86 Hardware
Hello
I have two Sun FastEthernet PCI cards, each with one RJ45 port and a port labeled "MII". Would I be able to use these cards in a PC (Dell Precision 7xx) or x86 hardware in general?
Thanks
Matt
Find the barcode paper sticker on the NIC and read the numbers. Report back here with what you find. That will be the actual part number of the product, in a format of something like
501-XXXXyyyyWe would be interested in only the first seven digits.
I vaguely remember that MS Operating Systems (at least from Win9x through WinXP) should recognize it natively from its chipset manufacturer. You wouldn't damage anything by just installing it to a PCI slot and booting your system. Your mileage may vary.
I'm guessing you may find it to be this *<--link*
(Ignore the `notes` on that web page, and the embedded URL's are broken as well. It's not a Sun Microsystems web site.)
Similar Messages
-
PCo integration with MII and MES
Hi,
How is PCo placed in MII and ME Achitecture. Can PCo directly connects to Shopl floor systems? and how it is connected to MES system. IS this something like Shop floor>PCo->MII->ME->ERP?
Can someone please make me understand?
Thanks,
RaveenHi,
as per my knowledge MII helps to interface between MES (if it is installed) and ERP.
if we consider levels then
all the PLCs are in level 1.
all the scada,Historian are in level 2,
MES and database in level 3,
and ERP in level 4.
MII is between level 3 and level 4,
it helps to interface this two level.
as I know PCO can configured with MII. PCO help to create that connectivity between the tag value coming from the scada historian system and MII.
regards,
Suman -
PCI expansion slots with LV and NI hardware
I was wondering if there were any hardware or software limitations
with the use of a PCI expansion unit with NI boards and LabVIEW.pincpanter wrote:
Hello LabVIEWers,
I tried to install the old DAQ-mX 7.5 to drive a NI 6601 PCI card under Microsoft's Virtual XP (host is Win7 Pro).
The driver installation failed somewhere (the errore message did'nt specify exactly what went wrong).
Also, the card itself was not seen by the virtualized OS.
Documentation available is somewhat limited and confusing, so I prefer to ask to actual users.
Are you running multiple LabVIEW versions on different VM's? Which ones? Do you get troubles?
Are the virtual OS really able to recognize the hardware? Is it possible to install different versions of the DAQ drivers on each?
Thank you in advance for your help
The PCI bus is not exposed to the MS XP virtual machine - You can't get there on that VM although.. while not officially supported other XP VM emulators do exist. a quick search on the forums should yeild results
Jeff -
IMAQdx with JAI and a hardware trigger
Hello,
We are working with two 'JAI AD-080' cameras and IMAQdx, and have two problems regarding the triggering and frame grabbing:
1) We are unable to change the trigger source through IMAQdx property node or the Vision Acquisition Express; Vision Acquisition block.
2) When we manually edit the trigger source property using the NI Measurement and Automation Explorer (MAX) to its correct value, we can't get all four of the CCD's to run at a time without resulting in bad packets, e.g. horizontal black lines across the images.
Our goal is to obtain the images from the 4 CCD's at a rate of 5 Hz using our hardware trigger. We can already connect and obtain all four images at full speed, but the 5 Hz trigger is not being used by the cameras in that case.
Details of the setup:
NI 2011, Windows 7
Two (2) JAI AD-080 cameras (with 2 CCD's each), GigE cameras connected over Ethernet
Hardware triggering at 5 Hz, on pin: 'Line 7 - TTL In 1'
Details of the problem:
(1) Setting the trigger source not possible in Vision Express or IMAQdx property node
In order to use our hardware trigger, we have to set the camera property 'CameraAttributes::AcquisitionControl::TriggerSource' to a specific pin (Line 7 - TTL In 1). This property is available in MAX, but is not usable in the Vision Express Block. The property is present, but the values are invalid. Here is what I think is happening: the list of properties are read from the camera, but LabVIEW does not know what the valid values are for that property and it populates the value drop-down menu with whatever was loaded last. This can be seen in figures 1 and 2 where the values in the drop down menu change.
Similarly, this property of 'Trigger Source' cannot be changed programmatically using the IMAQdx property node shown here: http://digital.ni.com/public.nsf/allkb/E50864BB41B54D1E8625730100535E88
I have tried all numeric values from 0 to 255, and most give me a value out of range error, but the ones that do work result in no change to the camera.
(2) Lost packets in image during triggering
If I set the 'Trigger Source' property in MAX to the correct pin, save the configuration, and then use the Vision Acquisition Express block to connect to the camera, the triggering works properly (the hardware trigger is used and the images are received by LabVIEW at 5 Hz). However, this only works for one CCD: If i use the same code for all four CCD's at the same time, I get black bars on the images, and at least one of the CCD's result in an error in 'IMAQdx Get Image.vi' (code -1074360308, -1074360316)
I tested this by using the configuration attributes created by the Vision Express Block, (The string used in the 'IMAQdx Read Attributes From String.vi'), in the code we have been developing as well as a very simplified version which I have attached. Those configuration attributes are saved in the text files: JAI_Config_TrigON.txt and JAI_Config_TrigOFF.txt for using triggering or not respectively.
So my final questions are:
Is there a problem with the IMAQdx because it doesn't recognize the trigger source value?
Do you have any suggestions for why there are bad packets and trouble connecting to the cameras when I load them with the trigger on attributes?
Thank you for your time -
Attachments:
Fig1_VisionAcq.png 387 KB
Fig2_VisionAcq.png 442 KB
Fig3_BadPackets.png 501 KBHello,
Thank you for your response; especially the speed in which you responded and the level of detail.
I have not solved the problem fully in LabVIEW yet, but I was able remove the black lines and apparitions from the images using different camera parameters.
Since this was a significant victory I wanted to update:
1) Version of IMAQdx?
I have IMAQdx 4.0, but the problem persists.
2) Setting configuration files
Your suggestion to pay attention to the order in which the properties are set as well as using the MAX settings is very helpful. I have not explored this feature fully, but I was able to successfully use MAX to set the default settings and then open the cameras programmatically without loading a new configuration file.
3) Bandwidth limitations
I modified the CCD's to only use 250 Mbits/second, but the lost packets (or missing lines/ apparitions) were still present.
4) JAI AD-080GE Specifics
I am using the JAI AD-080GE; and there are two settings for this camera that I want to mention:
JAI Acquisition Control>> Exposure Mode (JAI)>>Edge pre-select
JAI Acquisition Control>> Exposure Mode (JAI)>>Delayed readout EPS trigger
The "Edge pre-select" mode uses an external trigger to initiate the capture, and then the video signal is read out when the image is done being exposed.
The "Delayed readout EPS trigger" can delay the transmission of a captured image in relation to the frame start. It is recommended by JAI to prevent network congestion if there are several cameras triggered simultaneously on the same GigE interface. The frame starts when the 'trigger 0' is pulsed, then stored on the camera, then is transmitted on 'trigger 1'.
The default selection is the "Delayed readout EPS trigger", however, I do not know how to set the 'trigger 1' properly yet and I only have one connection available on my embedded board that is handling the triggering right now (I don't know if 'trigger 1' needs to be on a separate line or not). Incidentally, the system does not work on this setting and gives me the black lines (aka lost packets/ apparitions).
I was able remove the black lines and apparitions using the "Edge pre-select" option on all 4 images with a 5 Hz simultaneous trigger. I confirmed this using the "JAI Control Tool" that ships with the cameras. I am unable to make this happen in MAX though, as the trigger mode is automatically switched to 'off' if I use the mode: JAI Acquisition Control>> Exposure Mode (JAI)>>Edge pre-select
i.e. when manually switching the trigger mode to 'on' in MAX, "JAI Acquisition Control>> Exposure Mode (JAI)>>Delayed readout EPS trigger" option is forced by MAX. The vise-versa is also forced so that if EPS mode is chosen, "Trigger Mode Off" is forced.
Additionally, there is a setting called:
Image Format Control>>Sync Mode>>Sync & Image Format Control>>Sync Mode>>Async
When the "Sync" option is chosen the NIR CCD uses the trigger of the VIS CCD. In addition to using the "Edge pre-select" option, the "Sync" option improves the triggering results significantly.
5) Future troubleshooting
Since I cannot set the camera parameters manually in MAX (due to MAX forcing different combinations of parameters in 4), I am going to explore manually editing the configuration file and loading those parameters at startup. This can be tricky since a bad combination will stall the camera, but I can verify the settings in JAI Control Tool first. There is also an SDK that is shipped with the cameras, so I may be able to use those commands. I haven't learned C/C++ yet, but I have teammates who have. -
MOVED: MSI 785GT-E63 problems with temps and temp hardware
This topic has been moved to Off-Topic Technical.
https://forum-en.msi.com/index.php?topic=140927.0I also use cpuid hwmonitor to check temps n volts 12 vlt rail is at 12.05 during load. The gpu load temps on the lightning nvr exceed 72c at stock and 76c with the oc. Should I get a new mobo? Compatibility issue? I was looking at a asrock 990fx extreme 3 as this would allow me to upgrade my CPU later if I choose. I am on my current main pc bc bulldozer didn't grab me. Some benches r less than the x6s, my two 6970s perform btr than a single 7970 for my needs and the only increase I would see is if I got two 7970s that's way to much coin n would be bottlenecked by my current CPU I'm sure. Any ideas? I'm at a loss
-
Solaris 10 x86 goes to reboot mode after installing Sun x4 PCIe Quad card
I have an x4200 server installed with solaris 10 x86 11/06 OS. After installing the OS it comes up fine.
Now, When I install an SUN x4 PCIe Quad Gigabit Ethernet card on PCI slot 0 and on the power up server does not comes up. It gpes into the reboot mode.
bash-3.00# uname -a
SunOS server1-1 5.10 Generic_118855-33 i86pc i386 i86pc
Does any one has face this issue..Solution found:
First tried to login using "console login" when solaris booted up, before the desktop login window appeared. Then, run command "kdmconfig", changed the video device to X86 VESA compatible device, which is from the x86 driver and porting kit for solaris, then test/save and exit. After that, reboot the system. Now it is working, not perfect though (due to my old monitor) :)- -
Problem with DAQmx and Real Time PCI-7041/6040E.
Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM -
Why AS10g Forms Applet don´t start with IE7 and SUN Java???
Hi @ all,
since two days i am really confused about this strange behaviour of internet explorer 7 with the Sun JRE 1.5.0_15.
Running our forms with Mozilla Firefox 3.x works fine with Sun JRE, but with IE7 the applet doesn´t start.
I don´t get any error messages. The only thing I can see is that the java console is not appearing, but I don´t think that my java installation is corrupted or something is configured wrong because other java applets from several homepages are working without problems ( and the java console is appearing ).
I read about the archive_ie parameter and I tried it but there were no changes in the behaviour of IE7.
best regards
ThomasHi,
I'm trying to connect through the Message Queue Administration Console. I've created a group called admin under ou=Groups,dc=mydomain,dc=com, which has the following properties:
objectClass top
objectClass groupofuniquenames
description Administration group for MQ
uniqueMember uid=mqUser,ou=People, dc=qxlva-domain,dc=com
cn admin
Still, mqUser is forbidden.
Cheers,
Ben -
Error -200141 when doing buffered events with DAQmx and PCI-6602
When doing buffered events with DAQmx and PCI-6602 I get error 200141 - Data was overwritten before it could be read by the system.
This error is generated ONLY with random inputs >200/sec.
My setup is :
DAQmxCreateCIVCountEdges(taskhandle,"Dev1/ctr3"....
DAQmxCG+FGSampClkTiming(taskhandle,"/Dev1/FPI35",...
DAQmxSetCICountEgdesChan(taskhandlem,"", "/Dev1/80MHZTimeBase")
DAQmxSetChanAttribute(taskhandlw,",",DAQmx_CI_DataXferMech,DAQmx_Val_DMA,0);
Can somebody help ?i'm getting the same Error-200141, while reading semiperiods. (Meas_Buffered semiperiod continous)
while loop ex.rate seems to be pulsewidth*no.Samples to read. in my case PW=60ms
Input buffer size measured with Property node= 10000
why this error happens?? i cant use any mode other than implicit timing for semi-period measurement right??
more info: all the ai channels are used ~ 16 differencial.
i found one solution which is _ reinitializing the whole task if an error occur. is this the right way??
Kudos always welcome for helpful posts
Attachments:
Counter_1_Meas Buffered Semi-Period-Continuous_main_lv09.vi 34 KB
SemiPeriod_Reconnect Counter on Error.vi 35 KB -
My sun has locked my ph and itsays it s disabled how do I gett the codes to un lock it
If you restore the phone, from backup, on the last computer the phone synced with, this will remove the passcode.
-
OutOfMemory with Sun JavaVM (v 1.6) and all OK with Microsoft JavaVM...
Hello java-community :),
i present you real big problem with Java... :(
I've developed Java Chat Applet for one telephone company (Wind (Italy)) the chat address is : "http://digiland.libero.it/chat.php".
The problem is :
1) if you try to enter to the chat (launch Applet) (unfortunately :( the site is in italian only) with Sun JavaVM (jre v. 1.4, 1.5, 1.6) and try to navigate from one audio-video room to another after about 20 room changes the Chat (Java Applet) go to OutOfMemory (see you Java console) (it's possible monitoring the allocation memory and objects with TaskManager of Windows)... The memory from one room change to another accumulates 5 MegaBytes every time !!!
2) if you try to enter to the chat (launch Applet) with Microsoft JavaVM (analog of Sun jre 1.0.8) and try to navigate from one audio-video room to another Chat work perfectly and infinitely - you can see the small accumulation of memory.
Another case (objects and NON memory allocation) :
3) if you try to navigate from one NON audio-video room to another with Sun JavaVM you can see accumulates of objects (see TaskManager of Windows) 300-500 at time !!! And when Objects quantity arrived to 10.000 Applet go to OutOfMemory. With Microsoft JavaVM all work perfectly and infinitely !!!
Why this differences ? I think it's a big bug... It's impossible to use Sun JavaVM ! :((( How can i solve this problem ? It's pity to say to client to pass to Microsoft JavaVM, but if i wiil not find solution i'll not another chance.
Thank you in advance,
Dmitri.Well you're in luck because there are only two possibilities:
- Its a memory leak in your applet/code, the microsoft vm just hides it (maybe using finalize on some things)
- Its a memory leak/bug in the Sun's Java. This is a bit harder to find, and you most likely have to work arround it. However its a java-bug please let them know.
1.) Run the applet
2.) Start up jconsole, on Linux the process of the Applet has no name
3.) Do the action when memory isn't freed, you can watch the memory-graphs. Don't do it until an OOM.
4.) Create a heap-snapshot: jsonsole->mbeans->hotspot->operations->dumpheap
5.) Start jhat, it has a browser frontend. JHat tells you which objects are/where reachable and why.
Good luck!
lg Clemens -
I am trying to install the NI PCMCIA-GPIB card on an IBM A22m NT2000 laptop. The GPIB V1.7 driver installs properly and recognizes the interface but fails to locate instruments.
The troubleshooter Wizard reports an unknown hardware error that may be due to a resource conflict or configuration error. I checked for hardware conflicts and found none and found no errors in the event viewer.
The Laptop was originally installed with WIN98 and the PCMCIA card worked fine then. After installing NT2000 I uninstalled the GPIB driver and reinstalled it. The card also works properly on another laptop with Win95.Hi Dave,
You should try using the lastest driver for the PCMCIA-GPIB interfaces. This is NI-488.2 2.1. You can find it in the Driver and Updates page.
DiegoF
National Instruments. -
SUN TEAM: Bugs in update and delete a record with long query
Creator Team,
In my opinio there is a bug issue with update and delete a record with a complex sql query. I�m using oracleXE and ojdbc14.ar with tomcat
In just two page I�m receving the following msg (I have 12 pages doing the same thing with less complex queries)
* Number of conflicts while synchronizing: 1 SyncResolver.DELETE_ROW_CONFLICT row 2 won't delete as values in database have changed: 2006-11-29
* Cannot commit changes: Number of conflicts while synchronizing: 1 SyncResolver.UPDATE_ROW_CONFLICT row 0 values changed in database
when i tried to delete or commit the updated changes in the register...
The interesting is that this code function with jdbc of jsc...
My query is bellow:
SELECT ALL PATRIMONIO.TB_BEM.INCODIGOBEM,
PATRIMONIO.TB_BEM.VATOMBAMENTO,
PATRIMONIO.TB_BEM.VAMATERIAL,
PATRIMONIO.TB_BEM.INCODIGOSETOR,
PATRIMONIO.TB_SETOR.VANOME AS NOMESETOR,
PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR,
PATRIMONIO.TB_FORNECEDOR.VANOME AS NOMEFORNECEDOR,
PATRIMONIO.TB_BEM.DACHEGADA ,
PATRIMONIO.TB_BEM.DASAIDAPREVISTA,
PATRIMONIO.TB_BEM.DASAIDAEFETIVA,
PATRIMONIO.TB_BEM.VAMARCA,
PATRIMONIO.TB_BEM.VAMODELO,
PATRIMONIO.TB_BEM.VADESBAIXABEM,
PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO,
PATRIMONIO.TB_TIPOAQUISICAO.VANOME AS NOMETIPOAQUISICAO
FROM PATRIMONIO.TB_BEM , PATRIMONIO.TB_TIPOAQUISICAO, PATRIMONIO.TB_SETOR, PATRIMONIO.TB_FORNECEDOR
WHERE PATRIMONIO.TB_BEM.INCODIGOTIPOAQUISICAO = PATRIMONIO.TB_TIPOAQUISICAO.INCODIGOTIPOAQUISICAO
AND PATRIMONIO.TB_BEM.INCODIGOSETOR = PATRIMONIO.TB_SETOR.INCODIGOSETOR
AND PATRIMONIO.TB_BEM.INCODIGOFORNECEDOR = PATRIMONIO.TB_FORNECEDOR.INCODIGOFORNECEDOR
AND PATRIMONIO.TB_BEM.INCODIGOBEM LIKE ?
AND PATRIMONIO.TB_BEM.VATOMBAMENTO LIKE ?
AND PATRIMONIO.TB_BEM.VAMATERIAL LIKE ?
AND PATRIMONIO.TB_SETOR.VANOME LIKE ?
AND PATRIMONIO.TB_FORNECEDOR.VANOME LIKE ?
ORDER BY PATRIMONIO.TB_BEM.VATOMBAMENTO ASC
Why this problem is happing? Did you had some solution for that? Is the problem because the query is too long?!
please help me!
Gustavo CallouHello people,
I�m doing this to try to solution that bug:
This code is working fine... but I do not understand why I�m receiving the nullpointer exception!??!!?
// create a new rowset
CachedRowSetXImpl pkRowSet = new CachedRowSetXImpl();
try {
RowKey rk = tableRowGroup1.getRowKey();
if (rk != null) {
// set the rowset to use the Patrimonio database
pkRowSet.setDataSourceName("java:comp/env/jdbc/Patrimonio");
String query = "DELETE FROM TB_BEM WHERE INCODIGOBEM = "+tb_bemDataProvider.getValue("INCODIGOBEM", rk).toString();
pkRowSet.setCommand(query);
pkRowSet.setTableName("TB_BEM");
// execute the rowset -- which will contain a single row and single column
pkRowSet.execute();
pkRowSet.next();
info("Apagado");
} catch (Exception ex) {
log("ErrorDescription", ex);
error(getApplicationBean1().trateException(ex.getMessage()));
} finally {
pkRowSet.close();
Please someone help me!!!
Gustavo Callou -
[SOLVED]Asus UX32VD, problems with ACPI and Intel video driver
1. The bigger problem seems to be Intel video driver:
When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset". From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
Intel driver version: xf86-video-intel 2.20.1-3
2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
[ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
[ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
[ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
[ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
[ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
[ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
[ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
[ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
[ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
[ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
[ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
[ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
[ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
[ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
[ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
[ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
[ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
[ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
[ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
[ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
[ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
[ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
[ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
[ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
[ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
[ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
[ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
[ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
[ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
[ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
[ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
[ 0.000000] 0000000000 - 00cb000000 page 2M
[ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
[ 0.000000] 0100000000 - 012f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
[ 0.000000] RAMDISK: 37a46000 - 37d1b000
[ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
[ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
[ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000c97be
[ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
[ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
[ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
[ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
[ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
[ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
[ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
[ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
[ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
[ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
[ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
[ 0.000000] 0: 0x000ca01e -> 0x000ca032
[ 0.000000] 0: 0x000ca033 -> 0x000ca045
[ 0.000000] 0: 0x000ca06b -> 0x000ca07f
[ 0.000000] 0: 0x000ca080 -> 0x000ca081
[ 0.000000] 0: 0x000ca083 -> 0x000ca084
[ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
[ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
[ 0.000000] 0: 0x000ca90e -> 0x000cad1d
[ 0.000000] 0: 0x000caff4 -> 0x000cb000
[ 0.000000] 0: 0x00100000 -> 0x0012f200
[ 0.000000] On node 0 totalpages: 1019347
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
[ 0.000000] Normal zone: 3016 pages used for memmap
[ 0.000000] Normal zone: 190008 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
[ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
[ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
[ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
[ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
[ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
[ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
[ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
[ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
[ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
[ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
[ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
[ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
[ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
[ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
[ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
[ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
[ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
[ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
[ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
[ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
[ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
[ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
[ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.208 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
[ 0.000032] 00cbc00000 - 00cfe00000 page 2M
[ 0.151118] Security Framework initialized
[ 0.151124] AppArmor: AppArmor disabled by boot time parameter
[ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153673] Mount-cache hash table entries: 256
[ 0.153885] Initializing cgroup subsys cpuacct
[ 0.153888] Initializing cgroup subsys memory
[ 0.153897] Initializing cgroup subsys devices
[ 0.153899] Initializing cgroup subsys freezer
[ 0.153901] Initializing cgroup subsys net_cls
[ 0.153903] Initializing cgroup subsys blkio
[ 0.153938] CPU: Physical Processor ID: 0
[ 0.153940] CPU: Processor Core ID: 0
[ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154505] mce: CPU supports 7 MCE banks
[ 0.154520] CPU0: Thermal monitoring enabled (TM1)
[ 0.154528] using mwait in idle threads.
[ 0.155909] ACPI: Core revision 20120320
[ 0.173638] ftrace: allocating 17828 entries in 70 pages
[ 0.187014] DMAR: Host address width 36
[ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
[ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.187127] HPET id 0 under DRHD base 0xfed91000
[ 0.187335] Enabled IRQ remapping in x2apic mode
[ 0.187337] Enabling x2apic
[ 0.187339] Enabled x2apic
[ 0.187348] Switched APIC routing to cluster x2apic.
[ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.325337] ... version: 3
[ 0.325338] ... bit width: 48
[ 0.325340] ... generic registers: 4
[ 0.325342] ... value mask: 0000ffffffffffff
[ 0.325343] ... max period: 000000007fffffff
[ 0.325345] ... fixed-purpose events: 3
[ 0.325347] ... event mask: 000000070000000f
[ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.365318] Booting Node 0, Processors #1
[ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391966] #2
[ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418597] #3 Ok.
[ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.432363] Brought up 4 CPUs
[ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
[ 0.436881] devtmpfs: initialized
[ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
[ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
[ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
[ 0.439159] NET: Registered protocol family 16
[ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.439288] ACPI: bus type pci registered
[ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488790] PCI: Using configuration type 1 for base access
[ 0.489423] bio: create slab <bio-0> at 0
[ 0.489488] ACPI: Added _OSI(Module Device)
[ 0.489490] ACPI: Added _OSI(Processor Device)
[ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
[ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600414] ACPI: Dynamic OEM Table Load:
[ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601622] ACPI: Dynamic OEM Table Load:
[ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.602615] ACPI: Dynamic OEM Table Load:
[ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.603483] ACPI: Interpreter enabled
[ 0.603488] ACPI: (supports S0 S3 S4 S5)
[ 0.603522] ACPI: Using IOAPIC for interrupt routing
[ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.709614] ACPI: No dock devices found.
[ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
[ 0.710683] PCI host bridge to bus 0000:00
[ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
[ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
[ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
[ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
[ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
[ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
[ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
[ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
[ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.475460] vgaarb: loaded
[ 1.475461] vgaarb: bridge control possible 0000:00:02.0
[ 1.475508] PCI: Using ACPI for IRQ routing
[ 1.477328] PCI: pci_cache_line_size set to 64 bytes
[ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
[ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
[ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
[ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
[ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
[ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
[ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
[ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
[ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
[ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
[ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
[ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
[ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
[ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
[ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
[ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
[ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
[ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
[ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
[ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
[ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
[ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
[ 1.477696] NetLabel: Initializing
[ 1.477698] NetLabel: domain hash size = 128
[ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.477713] NetLabel: unlabeled traffic allowed by default
[ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.479760] Switching to clocksource hpet
[ 1.485853] pnp: PnP ACPI init
[ 1.485869] ACPI: bus type pnp registered
[ 1.486219] pnp 00:00: [bus 00-3e]
[ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
[ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.533253] pnp 00:02: [io 0x0000-0x001f]
[ 1.533255] pnp 00:02: [io 0x0081-0x0091]
[ 1.533257] pnp 00:02: [io 0x0093-0x009f]
[ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
[ 1.533262] pnp 00:02: [dma 4]
[ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.533487] pnp 00:05: [io 0x002e-0x002f]
[ 1.533489] pnp 00:05: [io 0x004e-0x004f]
[ 1.533491] pnp 00:05: [io 0x0061]
[ 1.533493] pnp 00:05: [io 0x0063]
[ 1.533495] pnp 00:05: [io 0x0065]
[ 1.533497] pnp 00:05: [io 0x0067]
[ 1.533498] pnp 00:05: [io 0x0070]
[ 1.533500] pnp 00:05: [io 0x0080]
[ 1.533502] pnp 00:05: [io 0x0092]
[ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.533506] pnp 00:05: [io 0x0680-0x069f]
[ 1.533508] pnp 00:05: [io 0x0200-0x020f]
[ 1.533510] pnp 00:05: [io 0xffff]
[ 1.533512] pnp 00:05: [io 0xffff]
[ 1.533514] pnp 00:05: [io 0x0400-0x0453]
[ 1.533518] pnp 00:05: [io 0x0458-0x047f]
[ 1.533520] pnp 00:05: [io 0x0500-0x057f]
[ 1.533522] pnp 00:05: [io 0x164e-0x164f]
[ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.533579] system 00:05: [io 0xffff] has been reserved
[ 1.533581] system 00:05: [io 0xffff] has been reserved
[ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533606] pnp 00:06: [io 0x0070-0x0077]
[ 1.533620] pnp 00:06: [irq 8]
[ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.533685] pnp 00:07: [io 0x0454-0x0457]
[ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.533764] pnp 00:08: [io 0x0010-0x001f]
[ 1.533767] pnp 00:08: [io 0x0022-0x003f]
[ 1.533769] pnp 00:08: [io 0x0044-0x005f]
[ 1.533771] pnp 00:08: [io 0x0072-0x007f]
[ 1.533773] pnp 00:08: [io 0x0080]
[ 1.533774] pnp 00:08: [io 0x0084-0x0086]
[ 1.533776] pnp 00:08: [io 0x0088]
[ 1.533778] pnp 00:08: [io 0x008c-0x008e]
[ 1.533780] pnp 00:08: [io 0x0090-0x009f]
[ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
[ 1.533858] pnp 00:09: [irq 13]
[ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.533945] pnp 00:0a: [irq 12]
[ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.534008] pnp 00:0b: [io 0x0060]
[ 1.534010] pnp 00:0b: [io 0x0064]
[ 1.534017] pnp 00:0b: [irq 1]
[ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
[ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
[ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.534823] pnp: PnP ACPI: found 15 devices
[ 1.534824] ACPI: ACPI bus type pnp unregistered
[ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 1.541791] NET: Registered protocol family 2
[ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.544346] TCP: reno registered
[ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544464] NET: Registered protocol family 1
[ 1.544482] pci 0000:00:02.0: Boot video device
[ 1.579823] PCI: CLS 64 bytes, default 64
[ 1.579868] Unpacking initramfs...
[ 1.651952] Freeing initrd memory: 2900k freed
[ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
[ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
[ 1.652909] audit: initializing netlink socket (disabled)
[ 1.652920] type=2000 audit(1343310419.543:1): initialized
[ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.655215] VFS: Disk quotas dquot_6.5.2
[ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.655387] msgmni has been set to 7683
[ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.655616] io scheduler noop registered
[ 1.655619] io scheduler deadline registered
[ 1.655674] io scheduler cfq registered (default)
[ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 1.656047] efifb: probing for efifb
[ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.658532] efifb: scrolling: redraw
[ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.661755] Console: switching to colour frame buffer device 128x48
[ 1.664865] fb0: EFI VGA frame buffer device
[ 1.664872] intel_idle: does not run on family 6 model 58
[ 1.664905] GHES: HEST is not enabled!
[ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.665554] Linux agpgart interface v0.103
[ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
[ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.668518] mousedev: PS/2 mouse device common for all mice
[ 1.668581] rtc_cmos 00:06: RTC can wake from S4
[ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.668766] cpuidle: using governor ladder
[ 1.668768] cpuidle: using governor menu
[ 1.668897] TCP: cubic registered
[ 1.669011] NET: Registered protocol family 10
[ 1.669206] NET: Registered protocol family 17
[ 1.669210] Registering the dns_resolver key type
[ 1.669345] PM: Hibernation image not present or could not be loaded.
[ 1.669352] registered taskstats version 1
[ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
[ 1.670074] Initializing network drop monitor service
[ 1.671692] Freeing unused kernel memory: 740k freed
[ 1.671810] Write protecting the kernel read-only data: 8192k
[ 1.677537] Freeing unused kernel memory: 1588k freed
[ 1.680114] Freeing unused kernel memory: 640k freed
[ 1.688393] systemd-udevd[48]: starting version 186
[ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.729878] usbcore: registered new interface driver usbfs
[ 1.729905] usbcore: registered new interface driver hub
[ 1.729967] usbcore: registered new device driver usb
[ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.733581] SCSI subsystem initialized
[ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
[ 1.735298] libata version 3.00 loaded.
[ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.743591] hub 1-0:1.0: USB hub found
[ 1.743601] hub 1-0:1.0: 2 ports detected
[ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
[ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.756431] hub 2-0:1.0: USB hub found
[ 1.756436] hub 2-0:1.0: 2 ports detected
[ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
[ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.757594] xHCI xhci_add_endpoint called for root hub
[ 1.757598] xHCI xhci_check_bandwidth called for root hub
[ 1.757646] hub 3-0:1.0: USB hub found
[ 1.757657] hub 3-0:1.0: 4 ports detected
[ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.757848] xHCI xhci_add_endpoint called for root hub
[ 1.757851] xHCI xhci_check_bandwidth called for root hub
[ 1.757894] hub 4-0:1.0: USB hub found
[ 1.757905] hub 4-0:1.0: 4 ports detected
[ 1.759643] ahci 0000:00:1f.2: version 3.0
[ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.766833] scsi0 : ahci
[ 1.766937] scsi1 : ahci
[ 1.767022] scsi2 : ahci
[ 1.767101] scsi3 : ahci
[ 1.767184] scsi4 : ahci
[ 1.767262] scsi5 : ahci
[ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
[ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
[ 1.767505] ata3: DUMMY
[ 1.767507] ata4: DUMMY
[ 1.767508] ata5: DUMMY
[ 1.767510] ata6: DUMMY
[ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
[ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.087320] ata2.00: configured for UDMA/133
[ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087920] ata1.00: configured for UDMA/133
[ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
[ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
[ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095497] sda: sda1 sda2
[ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.096681] sdb: sdb1 sdb2 sdb3
[ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.173153] hub 1-1:1.0: USB hub found
[ 2.173332] hub 1-1:1.0: 6 ports detected
[ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.415509] systemd-udevd[144]: starting version 186
[ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.465658] [drm] Initialized drm 1.1.0 20060810
[ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.482290] ACPI: Lid Switch [LID]
[ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.483119] ACPI: Power Button [PWRB]
[ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.484548] ACPI: Sleep Button [SLPB]
[ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.494298] ACPI: Requesting acpi_cpufreq
[ 2.507995] i915 0000:00:02.0: setting latency timer to 64
[ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
[ 2.530047] ACPI: AC Adapter [AC0] (on-line)
[ 2.532019] Monitor-Mwait will be used to enter C-1 state
[ 2.532089] Monitor-Mwait will be used to enter C-2 state
[ 2.532122] ACPI: acpi_idle registered with cpuidle
[ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
[ 2.561573] wmi: Mapper loaded
[ 2.564667] iTCO_vendor_support: vendor-support=0
[ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
[ 2.587955] MXM: GUID detected in BIOS
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M" as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
gnome-session[1269]: DEBUG(+): Enabling debugging
gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
gnome-session[1269]: DEBUG(+): fill: *** Adding required components
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1360
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1279
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
gnome-session[1269]: DEBUG(+): Got callback for signal 15
gnome-session[1269]: DEBUG(+): GsmManager: Logout called
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
gnome-session[1269]: DEBUG(+): Unreffing manager
gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0. -
Solaris 10 X86 - Hardware RAID - SMC/SVM question...
I have gotten back into Sun Solaris System Administration after a five year hiatus... My skills are a little rusty and some of the tools have changed, so here is are my questions...
I have installed Solaris 10 release 1/06 on a Dell 1850 with an attached PowrVault 220v connected to a Perc 4 Di controller. The RAID is configured via BIOS interface to my liking, Solaris is installed and see's all my partitions which I created during install.
For testing purposes, the servers internal disk is used for the OS, the PowerVault is split into 2 RAID's - one is a mirror, one is a stripe...
The question is; do I manage the RAID using Sun Management Console and the tools OR do I use SMC?
When I launch SMC and go into Enhanced Storage... I do not see any RAID's... If I select "Disks" I do see them, but when I select them, it wants to run "FDISK" on them... now this is OK since they are blank but I want to ensure I am not doing sometinhg I should not be concerned with...
If the PERC controller is controlling the RAID, what do I need SMC for?You can use SMC for other purposes but it won't help your with RAID.
Sol 10 1/06 has raidctl which handles LSI1030 and LSI1064 RAID�enabled controllers (from raidctl(1M)).
Some of the PERCs (most?) are LSI but I don't know if they are chipsets used by your PoweEdge (I doubt it).
Generally you can break it down like this for x86:
If you are using hardware RAID with Solaris 10 x86 you have to use pre-Solaris (i.e. on the RAID controller) managment or hope that the manufacturer of the device has a Solaris managment agent/interface (good luck).
The only exception to this that I know of is the RAID that comes with V20z, V40z, X4100, X4200.
Otherwise you will want to go with SVM or VxVM and manage RAID within Solaris (software RAID).
SMC etc are only going to show you stuff if SVM is involved and VxVM has its own interface, otherwise the disks are controlled by PERC and just hanging out as far as Solaris is concerned.
Hope this helps.
Maybe you are looking for
-
How do i install a free osx or operating system on my macbook pro 2008?
Hey so the go is i have a macbook pro 2008 i love it too bits but for some reason my screen flickers all the time but ill just have to deal with it. Secondly i cant install any operating systems because i dont have a mac to download osx from or mount
-
How do I move clips in one pane of iMove (10.0.3) into the timeline? iMovie somehow doesn't realize I'm trying to edit the clips.
-
Hi All, I have created a Communication Channel that represents the communication between a Thrid Party System and R/3, where R/3 is receiver. Now the parameters I had entered initially for the Commnication Channel were: Adapter Type : RFC Transport P
-
XML BI Publisher Output in 2 sheets Excel
Hi , I want XML BI Publisher output in 2 sheets Excel. first sheet contains Report details and next sheet contains Report output. Could we please help me in this?. I am using BI Publisher 11.1.1.0 and Oracle apps is R12.1. Thanks
-
Korean Characters and External Table
Hi Experts. We have data exported from teradata through fexp utility. The file that we export has Korean character in it. When we are trying to load the file to Oracle Db (10.2) through external tables. But We are not able do a select query itself fr