Sun Fire V490-Internal FC Drives missing in Solaris 10 installation program
Hi,
We have a V490 server that we are attempting to configure, but the internal FC drives are not available to the Solaris 10 installation program.
The OpenBoot SCSI test fails:
{3} ok test-scsi
Testing /pci@9,600000/SUNW,qlc@2
ERROR : ISP2200 RISC engine did not generate expected interrupt.
DEVICE : /pci@9,600000/SUNW,qlc@2
SUBTEST : selftest:loop-tests:inquiry-test:disk-test
CALLERS : (f010f69c)
MACHINE : Sun Fire V490
SERIAL# : 66233440
DATE : 03/27/2012 14:27:32 GMT
CONTR0LS: diag-level=max test-args=
/pci@9,600000/SUNW,qlc@2 selftest failed, return code = 1
but the probe of the SCSI bus does not and displays the drives:
{3} ok probe-scsi
This command may hang the system if a Stop-A or halt command
has been executed. Please type reset-all to reset the system
before executing this command.
Do you wish to continue? (y/n) y
LiD HA LUN --- Port WWN --- ----- Disk description -----
0 0 0 500000e010192d11 FUJITSU MAP3147FC 0110
1 1 0 21000014c320ff73 SEAGATE ST314670FSUN146G055A
How can we fix this problem?
Thanks.
S Kayal
Edited by: 923748 on Mar 27, 2012 10:59 AM
Edited by: 923748 on Mar 27, 2012 11:00 AM
I don't think the test-scsi command is viable for that platform.
The FC disks are "viewed" by the system as external to the SCSI controller, almost as if they were in a multi-pack.
They are FC drives addressed by the chipset as SCSI disks.
Try:
<pre>probe-scsi-all</pre>
Edit:
Which release of Solaris 10 are you trying to install?
Older releases that might be fine for V480's won't work on V490's.
Edited by: rukbat on Mar 27, 2012 2:35 PM
Similar Messages
-
Login problem in sun fire V490 through Hyper terminal
I am a new user of sun Solaris 10 . In my sun fire v490 server every thing is configured fine there is no fault in booting .But when I configured the file /etc/inet/hosts in solaris 10 and missed to configure the file /etc/inet/netmask and /etc/inet/ipnodes, due to which server is not allow me to login there is an error occur " unable to login" . Now what is the other way to login into server console. I am entering in the console using normal mode, should I try to login in using diagnostic mode., or is there any other way to login into and modify the file. I also need training videos of solaris configuration .
Help in this regard will be highly appreciable.I don't think the test-scsi command is viable for that platform.
The FC disks are "viewed" by the system as external to the SCSI controller, almost as if they were in a multi-pack.
They are FC drives addressed by the chipset as SCSI disks.
Try:
<pre>probe-scsi-all</pre>
Edit:
Which release of Solaris 10 are you trying to install?
Older releases that might be fine for V480's won't work on V490's.
Edited by: rukbat on Mar 27, 2012 2:35 PM -
Re: Sun Fire v490 / Solaris 9 booting from CD, Network problems
Hi Folks,
Apologies in advance for the length of this post.
For the purposes of disaster recovery I have built a custom CD based on the Solaris 9 installation disk with our third party backup / restore software included on it.
After the rcS script has setup networking it runs a bash shell so that I can label / partition / format the hard disks as necessary then use the third party software to recover the system.
This works fine on almost all the machines we've tested (Ultra 10s, Ultra 30s, FS Prime Power 400)
On one Sun Fire v490 however I seem to have problems with networking...
Part of the customised rcS script makes the following call
ifconfig ce0 10.4.20.20 netmask 255.255.0.0 upto configure the NIC. However when the rcS script leaves me at the shell I'm unable to ping anything.
The output from ifconfig - a looks like...
lo0 flag=..
inet 127.0.0.1
ce0: flags=1000823<UP BROADCAST,NOTRAILER,MULTICAST,IPv4>
mtu 1500 index 2 inet 10.4.20.20 netmask ffff0000 broadcast 10.255.255.255 ether 0:14:4f:0:be:beThe only thing that looks odd to me is that there's no "RUNNING" entry for ce0 that I get if I boot from the same CD on my other machines (Ultra 30s & Ultra 10s)
The broadcast address looks wrong, but again it's the same when I boot from th CD on my other test machines and they all seem to work.
I'm pretty sure that ce0 is "plumbed", 'cos if I "unplumb" it from the shell prompt then it doesn't even appear in the output from ifconfig.
Someone has suggested that it's a connectivity issue, but if I boot normally rather than from my custom CD then the networking is fine.
As a test I tried removing the drivers for hme from the CD then booting one of my Ultra30s but in this case the entry for hme0 was completely absent from the output of ifconfig.
So I've concluded that the driver for ce0 is at least there on the v490.
So for the moment I'm confused as to why the ce0 appears on the output for ifconfig, but has no RUNNING 'flag'
Anyone got any ideas
Many thanks in advance
Regards
Kevinhello
you have an error in your interface configuration
you should have
you are using a class A ip adress but with a class B netmask
ip 10.4.20.20
netmask 255.255.0.0
broadcast should be 10.4.255.255
Message was edited by:
jerem81 -
On Sun fire v490 - Solaris 10 with Oracle 8.1.7.4 & Sybase 12.0
Hi,
We are going to upgrade our server with this configuration -
Sun Fire V490 2 x 1.05 GHz UltraSPARC IV CPU
8096MB RAM 2 x73GB local disk
2x FC 2GB Sun/QLogic HBAs
DAT72
On one machine we will have Sun Solaris v10 with
Oracle DB v8.1.7.4 & Second one will be Sun Solaris v10 with Sybase DB v12.0.0.6.
Now our question is - Sun fire have Hyper-thread CPUs ��� will the O/S and databases (Oracle and Sybase) view the proposed system as a true 4 CPU platform? Will parameters used to tune the database such as Sybase max online engines still operate in the same manner as before?
Our old machine configuration was - Sun E450 4x400MHz CPU 1024MB RAM 2 x18; 8x36GB disksQuestions on Oracle and Sybase should be directed to a database forum, this forum is for Sun hardware support.
Here is a link to a DB forum I look at from time to time:
http://www.dbforums.com/index.php
The topic of tuning Oracle or Solaris is way beyond the scope of this forum, I have attempted to go into it before but didn't get any feedback and I would only like to spend lots of time on it if I was being paid!!! On the memory side, keep in mind that Oracle 9i 64-bit can address a maximum of 2 ^ 64 ( 16777216 TB ) memory, prior to that the DBA had to define memory parameters in init.ora. To be honest the last time I worked with a Oracle 8 database I shut a HP K class server down permanently that had been migrated to Oracle 9i on Solaris by an Oracle consultant and I can't remember all the tuning trick etc. -
Sun Fire V490 dropping network connnections
Hi
We are having some issues on v490.
Network connections are getting drop and users are getting given below error
remote host : Connection reset by peer
aocdbs02a:root# fmdump -v -u 5b137743-2acf-ceb5-bfde-f4604e3f6d4f
TIME UUID SUNW-MSG-ID
Nov 02 18:22:23.4500 5b137743-2acf-ceb5-bfde-f4604e3f6d4f PCIEX-8000-5Y
50% fault.io.pci.device-invreq
Problem in: hc://:product-id=SUNW,Sun-Fire-V490:server-id=aocdbs02a/motherboard=0/hostbridge=1/pcibus=0/pcidev=1/pcifn=0
Affects: dev:////pci@9,600000/network@1
FRU: hc://:product-id=SUNW,Sun-Fire-V490:server-id=aocdbs02a/motherboard=0
Location: MB
50% fault.io.pci.device-invreq
Problem in: hc://:product-id=SUNW,Sun-Fire-V490:server-id=aocdbs02a/motherboard=0/hostbridge=1/pcibus=0/pcidev=2/pcifn=0
Affects: dev:////pci@9,600000/SUNW,qlc@2
FRU: hc://:product-id=SUNW,Sun-Fire-V490:server-id=aocdbs02a/motherboard=0
Location: MB
Please let me know if any patch I have to install..
Thanks
Sukrut sLack of running for an interface normally means network connectivity issue.
Check the network cable is plugged in securely.
Check for light on ethernet card and switch connectivity light.
Try a different switch port or switch and a different ethernet cable. -
Sun Fire V490 x 2 servers with Oracle RAC facing Split brain problem
Hi all,
I have Sun Fire V490 x 2 servers with Oracle RAC and they faced a Split brain problem. One of the node's database instance has gone down, The DBA claims it is due to network problem, but as such the networks are OK. We use the on board CE1 interface for Cluster interconnect and CE0 as the public interface.
Did anybody face this kind of a problem? Could this be a hardware/OS patch problem?
I had kept a continuous ping for 24 hours after this happened last time and the output shows no packet loss
Many thanks in advance.
Ushas SymonIn order to diagnose this properly, you'll need to provide too much detail and far too many log files for a generic discussion forum to handle.
Use your service contract and open a support case.
Because a cluster environment is involved you'll likely end up talking to the cluster support staff.
They can analyze hardware and software errors as well as review whether you configured the systems in a supportable fashion.
Be prepared to make a direct connection to each system and gather data using such as by using the Explorer tool. The technical support staff will tell you what they will actually need. -
Ip changing problem in solaris 10 (sun fire v490)
I am a new user of sun solaris . Yesterday I had configured the file /etc/inet/hosts but i missed to configure the file /etc/inet/netmask and /etc/inet/ipnodes, due to which server is not allowed me to login. Now what is the other way to login into server console. I am entering in the console using normal mode, should I try to login in using diagnostic mode., or is there any other way to login into and modify the file. I also need training videos of solaris configuration .
Help in this regard will be highly appreciable.
Regards
Muhammad Ali.I am a new user of sun solaris . Yesterday I had configured the file /etc/inet/hosts but i missed to configure the file /etc/inet/netmask and /etc/inet/ipnodes, due to which server is not allowed me to login. Now what is the other way to login into server console. I am entering in the console using normal mode, should I try to login in using diagnostic mode., or is there any other way to login into and modify the file. I also need training videos of solaris configuration .
Help in this regard will be highly appreciable.
Regards
Muhammad Ali. -
Upgraded: Internal Hard Drive MISSING
Hi guys,
I have 2 internal HDs. The first is a 500GB unpartitioned startup disk from Apple. The second, is a 750GB partitioned disk from Apple. The second disk, and all of its partitions, have disappeared!
Finder only shows my main HD; Disk Utility only shows my main HD.
I need access to that HD. HELP!+"Handful of reboots solved it."+
Whew! I was going to suggest reseating the drive connection.... -
Problem with RSC card on sun fire v490
Hi all,
I have a little problem.
I got few v490 that were already used.
When I connect to the management port of the RSC card I get the prompt of the RSC password, somthing i don't have.
The OS doesn't get loaded and I can't do anything. ( if I had access to the OS I would have reseted the password)
So now, I got left with the only option i thought of.
1. Disconnect the RSC card,
2. This will force the output of the consol to go to the serial port(tty).
3. Jumpstart the machine (beacuse I don't even have the password for the machine)
4. connect the RSC card, and reset the password.
There is someone here that encountered this problem??
Maybe there is a jumper that can reset the RSC password. i don't know... every response will be great!
Thanks!!!Hi,How to set my link up in solaris 10 ?
I dont know want happend to my machine solaris v440 it suddenly disconnected from n/w and finally i came to know that is a problem with NIC card..i din't find any light's glowing back side of the machine at NIC card.
can any one help me in this pls how can i proceed furture for getting my NIC back?
and i have excuted few commands
#ndd -set /dev/ce instance 0
#ndd -set /dev/ce adv_1000fdx_cap 1
#ndd -set /dev/ce adv_autoneg_cap 0
I have got dladm show-dev is
ce0 link: unknown speed: 1000 Mbps duplex: full
ce1 link: unknown speed: 0 Mbps duplex: unknown
I dont understand that why my link is showing still unknown ...any help.. -
Hello everyone,
I got issue with this UUID=a4334520-a3be-6004-b82d-b4042a6f1ade.
Pls advise or suggest us in this case.
TIME UUID SUNW-MSG-ID
Apr 19 18:48:48.6895 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-2K
100% defect.sunos.fmd.module
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
May 20 00:10:15.3150 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-4M Repaired
100% defect.sunos.fmd.module Removed
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
May 20 00:10:15.3984 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-6U Resolved
100% defect.sunos.fmd.module Removed
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
TIME UUID SUNW-MSG-ID
Apr 19 18:48:48.6895 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-2K
100% defect.sunos.fmd.module
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
May 20 00:10:15.3150 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-4M Repaired
100% defect.sunos.fmd.module Removed
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
May 20 00:10:15.3984 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-6U Resolved
100% defect.sunos.fmd.module Removed
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
TIME UUID SUNW-MSG-ID
Apr 19 18:48:48.6895 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-2K
100% defect.sunos.fmd.module
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
May 20 00:10:15.3150 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-4M Repaired
100% defect.sunos.fmd.module Removed
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
May 20 00:10:15.3984 a4334520-a3be-6004-b82d-b4042a6f1ade FMD-8000-6U Resolved
100% defect.sunos.fmd.module Removed
Problem in: -
Affects: fmd:///module/cpumem-diagnosis
FRU: -
Location: -
Thanks,
VuthaNot useful information. FMA has disable a component: A Solaris Fault Manager component has experienced an error that required the module to be disabled.
If you can post the messages from /var/adm/messages by the time the issue occurs, will be useful in order to help you.
Best.
</SQ> -
Upgrade Options for Internal Hard Drive on dv2000t Laptop (Installation Problems)
I need to replace a failed hard drive in my 2006 dv2000t laptop. The drive I'm replacing was already a replacement drive from the original 80GB drive that shipped with laptop. That first replacement 3 years ago (2008) was a 200GB drive, that worked well for about 3 years. But it just crashed (apparently). I was getting some "S.M.A.R.T" imminent drive failure warnings a week prior, and then it finally would no longer boot-up. Subsequent tests on the extracted drive show it as having many failed sectors.
I had no problem ordering a replacement drive the first time in 2008, restoring an Acronis backup image of original drive, installing it, etc. All went smoothly in 2008. So I assumed all would go smoothly again for yet another replacement and upgrade.
In 2008 the drive I ordered was a W.D. (Western Digital, sticking with the same brand as original) 2.5-in 5400rpm SATA drive (200GB). That was a SATA (I) drive (1.5 Gbit/s interface).
The first drive I recently ordered (Mar 2011) was a W.D 2.5-in 7200rpm 500GB SATA II (3.0 Gbits/s interface) drive (from W.D.'s "Scorpio Black" line.) Got the drive, burned the disc image to it, and popped it into the laptop. Unfortunately, upon startup, and after BIOS screen, all I get is a black screen with a fast flashing white cursor at the top of the screen. Drive apparently is not being recognized by the computer? Then I did some reading in a few on-line forums and found some references about this laptop not doing well with drive capacities over 320GB, nor with 7200rpm drives (because they run hotter than 5400 drives). And finally, references to the SATA interface speed. I ordered a 2nd drive, this one from W.D's "Scorpio Blue" line, this time a 5400rpm 320GB drive (but still SATA II). Same story, still won't work. So I decided that maybe the issue was the SATA speed. So I found someone who still had an older SATA (1.5 GBit/s) W.D. drive in stock . It's a W.D. SATA 250GB (no longer made). It should arrive in a couple days -- and I'm hoping this one works!
I would like to get some kind of confirmation about the blinking white cursor on the black screen on start-up. Is that typicalif the system not finding a bootable hard drive? Also, is this SATA vs. SATA-II issue a likely cause of my problem? I'm pretty sure there's nothing wrong with the new drives themselves, and the restored images on them , as the drives will mount and are accessible when I plug them in as external drives on my other computer.
This question was solved.
View Solution.I have been able to solve my own hard drive installation problems. It turns out that there were no issues with any of the new replacement drive(s) I ordered (thinking I had ordered drives with the wrong specs). The solution to the problem was a simple one. The restored drives were not booting because there was no MBR (Master Boot Record) on the drives after disc image restoration.
I am using Acronis True Image Home 2011 as my disc imaging (backup) software. And I just didn't understand how to properly restore backed up images to a new hard drive. I had done everything correctly except that I had not checked the box to "restore MBR" -- at the time not understanding what that was or its significance. Once I checked that box, and reimaged the new drive, it worked fine. -
Installing Oracle ODBC driver from within another installation
My application requires ODBC driver. Is it possible/recommended
to install the driver from within my installation program (other
than invokig the ODBC's setup program)? If so, what are the
files that need to be installed, the registry entries that need
to be updated and other activities perfromed?
Thanks
MichaelIn order for the ODBC driver to function properly, the Oracle
client must have been installed on the user's machine. If the
Oracle client has been successfully installed, users will have
the Oracle ODBC driver.
Since the Oracle client install is very large as installers
go, you probably don't want to package this with your app. In
addition, the Oracle client installation is pretty significant
in terms of what it does, so you definitely don't want to try to
replicate that work in your installer.
Justin -
Missing com.sun.corba.se.internal.iiop.CDRInputStream
I am trying to test the new OC4J 10.0.3 which supposed to be a J2EE 1.4 compliant.
I followed the instruction to unzip it, and when I tried to start it I got the error :
I did a thorugh search for that package in my Java directory and couldnt find a match in either J2SE or J2EE.
Your help is highly appreciated.
Starting OC4J...
05/01/22 02:13:22 Exception in thread "OC4J Launcher" oracle.oc4j.loader.util.An
notatedNoClassDefFoundError:
Missing class: com.sun.corba.se.internal.iiop.CDRInputStream
Dependent class: com.evermind.server.ApplicationContext
Loader: oc4j:10.1.3
Code-Source: /D:/Java/Jdev10g/j2ee14/j2ee/home/lib/oc4j-internal.jar
Configuration: <code-source> in boot.xml in D:\Java\Jdev10g\j2ee14\j2e
e\home\oc4j.jar
The missing class is not available from any code-source or loader in the server.
05/01/22 02:13:22 at oracle.oc4j.loader.PolicyClassLoader.handleClassNotFo
und (PolicyClassLoader.java:1956) [/D:/Java/Jdev10g/j2ee14/j2ee/home/oc4j.jar (f
rom system property java.class.path), by sun.misc.Launcher$AppClassLoader@14822
57]
at oracle.oc4j.loader.PolicyClassLoader.internalLoadClass (PolicyClassLo
ader.java:1641) [/D:/Java/Jdev10g/j2ee14/j2ee/home/oc4j.jar (from system propert
y java.class.path), by sun.misc.Launcher$AppClassLoader@1482257]
at oracle.oc4j.loader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1591) [/D:/Java/Jdev10g/j2ee14/j2ee/home/oc4j.jar (from system property java.c
lass.path), by sun.misc.Launcher$AppClassLoader@1482257]
at oracle.oc4j.loader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1577) [/D:/Java/Jdev10g/j2ee14/j2ee/home/oc4j.jar (from system property java.c
lass.path), by sun.misc.Launcher$AppClassLoader@1482257]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:319) [jre b
ootstrap, by jre bootstrap]
at com.evermind.server.ApplicationContext.<clinit> (ApplicationContext.j
ava:62) [/D:/Java/Jdev10g/j2ee14/j2ee/home/lib/oc4j-internal.jar (from <code-sou
rce> in boot.xml in D:\Java\Jdev10g\j2ee14\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.Application.<init> (Application.java:173) [/D:/Ja
va/Jdev10g/j2ee14/j2ee/home/lib/oc4j-internal.jar (from <code-source> in boot.xm
l in D:\Java\Jdev10g\j2ee14\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.initializeApplications (Applica
tionServer.java:1403) [/D:/Java/Jdev10g/j2ee14/j2ee/home/lib/oc4j-internal.jar (
from <code-source> in boot.xml in D:\Java\Jdev10g\j2ee14\j2ee\home\oc4j.jar), by
oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.ja
va:944) [/D:/Java/Jdev10g/j2ee14/j2ee/home/lib/oc4j-internal.jar (from <code-sou
rce> in boot.xml in D:\Java\Jdev10g\j2ee14\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerL
auncher.java:87) [/D:/Java/Jdev10g/j2ee14/j2ee/home/lib/oc4j-internal.jar (from
<code-source> in boot.xml in D:\Java\Jdev10g\j2ee14\j2ee\home\oc4j.jar), by oc4
j:10.1.3]
at java.lang.Thread.run (Thread.java:595) [jre bootstrap, by jre bootst
rap]Hi
when i am trying to start the oc4j server, it is throwing me the following error.
Please give me some solution...
06/05/19 16:20:40 oracle.classloader.util.AnnotatedClassFormatError: MBeanServer
EjbHome_StatefulSessionHomeWrapper1 (Unsupported major.minor version 49.0)
Invalid class: MBeanServerEjbHome_StatefulSessionHomeWrapper1
Loader: system.root:0.0.0
Code-Source: /C:/product/10.1.3/OracleAS_1/j2ee/home/application-dep
loyments/admin_ejb/deployment-cache.jar
Configuration: <ejb> in wrappers
Dependent class: com.evermind.server.ejb.deployment.SessionBeanDescripto
r
Loader: oc4j:10.1.3
Code-Source: /C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-intern
al.jar
Configuration: <code-source> in META-INF/boot.xml in C:\product\10.1.3
\OracleAS_1\j2ee\home\oc4j.jar
This class was compiled for a newer version of the JRE. Expected version
48.0, found 49.0.
06/05/19 16:20:40 at oracle.classloader.PolicyClassLoader.findLocalClass (
PolicyClassLoader.java:1457) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/pcl.ja
r (from system property java.class.path), by sun.misc.Launcher$AppClassLoader@54
87165]
at oracle.classloader.SearchPolicy$FindLocal.getClass (SearchPolicy.java
:167) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/pcl.jar (from system property
java.class.path), by sun.misc.Launcher$AppClassLoader@5487165]
at oracle.classloader.SearchSequence.getClass (SearchSequence.java:119)
[/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/pcl.jar (from system property java.
class.path), by sun.misc.Launcher$AppClassLoader@5487165]
at oracle.classloader.PolicyClassLoader.internalLoadClass (PolicyClassLo
ader.java:1660) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/pcl.jar (from syste
m property java.class.path), by sun.misc.Launcher$AppClassLoader@5487165]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1621) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/pcl.jar (from system proper
ty java.class.path), by sun.misc.Launcher$AppClassLoader@5487165]
at oracle.classloader.PolicyClassLoader.loadClass (PolicyClassLoader.jav
a:1606) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/pcl.jar (from system proper
ty java.class.path), by sun.misc.Launcher$AppClassLoader@5487165]
at java.lang.ClassLoader.loadClassInternal (ClassLoader.java:302) [jre b
ootstrap, by jre.bootstrap]
at java.lang.Class.forName0 (Native method) [unknown, by unknown]
at java.lang.Class.forName (Class.java:219) [jre bootstrap, by jre.boots
trap]
at com.evermind.server.ejb.deployment.SessionBeanDescriptor.createHomeIn
stance (SessionBeanDescriptor.java:443) [/C:/product/10.1.3/OracleAS_1/j2ee/home
/lib/oc4j-internal.jar (from <code-source> in META-INF/boot.xml in C:\product\10
.1.3\OracleAS_1\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.EJBPackageDeployment.getHomeInstanceCore (EJB
PackageDeployment.java:1136) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-i
nternal.jar (from <code-source> in META-INF/boot.xml in C:\product\10.1.3\Oracle
AS_1\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.EJBPackageDeployment.getHomeInstance (EJBPack
ageDeployment.java:1189) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-inter
nal.jar (from <code-source> in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1
\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.EJBPackageDeployment.bindRemoteHome (EJBPacka
geDeployment.java:533) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-interna
l.jar (from <code-source> in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j
2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.EJBPackageDeployment.bindHomes (EJBPackageDep
loyment.java:442) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar
(from <code-source> in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\h
ome\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ejb.EJBContainer.postInit (EJBContainer.java:1010
) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-sou
rce> in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\home\oc4j.jar), b
y oc4j:10.1.3]
at com.evermind.server.ApplicationStateRunning.initializeApplication (Ap
plicationStateRunning.java:210) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4
j-internal.jar (from <code-source> in META-INF/boot.xml in C:\product\10.1.3\Ora
cleAS_1\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.Application.setConfig (Application.java:391) [/C:
/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> i
n META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\home\oc4j.jar), by oc4j
:10.1.3]
at com.evermind.server.Application.setConfig (Application.java:308) [/C:
/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <code-source> i
n META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\home\oc4j.jar), by oc4j
:10.1.3]
at com.evermind.server.ApplicationServer.initializeSystemApplication (Ap
plicationServer.java:1480) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-int
ernal.jar (from <code-source> in META-INF/boot.xml in C:\product\10.1.3\OracleAS
_1\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.initializeAutoDeployedApplicati
ons (ApplicationServer.java:1467) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/o
c4j-internal.jar (from <code-source> in META-INF/boot.xml in C:\product\10.1.3\O
racleAS_1\j2ee\home\oc4j.jar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServer.setConfig (ApplicationServer.ja
va:922) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar (from <co
de-source> in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\home\oc4j.j
ar), by oc4j:10.1.3]
at com.evermind.server.ApplicationServerLauncher.run (ApplicationServerL
auncher.java:113) [/C:/product/10.1.3/OracleAS_1/j2ee/home/lib/oc4j-internal.jar
(from <code-source> in META-INF/boot.xml in C:\product\10.1.3\OracleAS_1\j2ee\h
ome\oc4j.jar), by oc4j:10.1.3]
at java.lang.Thread.run (Thread.java:534) [jre bootstrap, by jre.bootstr
ap] -
Please could you tell me what DLT/SDLT/Ultrium series drive works with Sun Fire V880 with SCSI Sun X6540A?
The question is URGENT because we need to do backup/restore of our Databases but we have not backup device...
We want to buy it but we don't know what exactly drives we can choose for our Sun with X6540A SCSI card.Hello,
the X6540A is a Dual Single-Ended Ultra/Wide SCSI (PCI) controller. The controller is only upto 40MB/sec, which might be suficient for a SDLT600 or LTO-2.
Every Single-Ended SCSI device works with this card, <b>but</b> performance would be low when using LVD/SE devices (some LVD devices can't operate in SE mode!)
I would suggest that you call Sun Sales.
I guess that the <b>PCI/PCI-X Dual Ultra320 SCSI Adapter</b> (SG-XPCI2SCSI-LM320) or <b>PCI Dual Ultra3 SCSI Host Adapter (LVD)</b> (X6758A) are a better choice if attaching more recent drives.
This is the <b> Sun Fire V880 - Full Components List</b>.
Michael -
How to flash bios on Sun Fire X2100 (without cd/dvd drive ) from solaris.
Hi I have the following problem. I need to udpdate bios in my sun fire x2100 (not the m2 version). Installed system on it is the latest solaris 10. I have also one laptop with sxce b107. I need to update bios to support zfs root/mirror.
Both devices are int the one subnet.
I download supplement cd from sun, but I was pretty amazed that there is available only remote update from rhel (32bit) or boot from cd/dvd drive.
Any help is welcome.
Lubos Kocman1. If an OS is installed:
- log in as you described
- shutdown the server with `init 0`
- this should bring you to the OK prompt
- Insert the bootable system software CDROM into the CDROM drive
- On the OK prompt, type `boot cdrom`
2. If no OS is installed:
- connect to the serial management port with your PC (Hyperterminal)
-> NOTE: you will need a DB-25 Adapter (Part No. 530-2889)
connect this adapter to the serial port of your PC, then connect the adapter
with an RJ45 cable to the serial management port of the server
-> Serial Port Settings in Hyper Terminal:
Duplex: Full
Bit Rate: 9600
Parity: None
Databits: 8
Stopbit: 1
Flow Control: Xon/Xoff
VT100 Emulation (if applicable): ON
- change to the OK prompt by typing `break`
-> if this does not work, try `reset -x`
- make sure your OS Installation CDROM is in the drive
- at the OK prompt, type `boot cdrom`
Maybe you are looking for
-
Having a problem with my mac and wy windows network!
Hi all! this is my first post, se please forgive any etiquette errors! I have bootcamp installed on my macbook, as the company i work with has a completely windows setup, but i would like to get away from this and be able to use my mac as it was inte
-
How do I get The ipad locked to run only one application for customers (perhaps a webapp)
how do I get The ipad locked to run only one application for customers (just one web app, or video- instructions, or just safari). What I really want is that my customers to only use one app that has all my services. It is an interactive app so I wou
-
Exchange 2013 - Admins can only log into one ECP server
Simple run down of my environment: • Two AD sites (Site1 and Site2) • One 2008 R2 domain controller at each site (DC1 w/ FSMOs and DC2) running AD forest function level 2008 R2 • One 2012 Std server with Exchange 2012 Std CU3 at each site (EX1 and EX
-
GL assignment for future date?
Hi everybody, We have an issue is as follows: - We have created a sales order for 08-09-2008 - We have created PO for 08-09-2008, here system will able to post everything fine. - Again we are creating one more PO for 08-09-2009, here system threws er
-
Hi gurus, i have a requirement where in i want to enhance the 0material with standard price in MBEW -STPRS what should be the logic in the user exit, i assume that it should be something like select stprs from mbew where mara-matrn = mbew-matrn but i