Sun GlassFish Mobility Platform Administration Console: Authentication fail
Dear All,
I have installed Sun GlassFish Mobility Platform and Sun GlassFish Enterprise Server v2.1 is also installed in the process. However i can log in to the the Sun GlassFish Enterprise Server v2.1. But I can not log in to the Sun GlassFish Mobility Platform, every time i try, it gives a authentication fail. Can anyone please help?
Regards
Sahrear
Hi Tomamiro,
Thanks for your reply. But i tried with username: admin and password: adminpass as was in default configuration. I also tried with password: syncpass, but still no luck. But interestingly i can always log in to the "Sun Glassfish server v2.1 administration console" with the username: admin and password: adminpass. But can never log in to the "SGMP administration console"!
Moving forward, i'm already frustrated with SGMP since the support is not as good as sun's other forums. I may try a fresh installation tomorrow but after that i'm not sure whether i will try again or not. Please let me know how to solve this problem if you can.
I really appreciated your effort, thanks again.
Similar Messages
-
Systems and platforms: Windows for GlassFish Mobility Platform 1.1
Hi all,
I'm new to sun glassfish mobility and wanted to try out the solution. I have a small company for J2ME based hadheld application development. Please help me with below questions.
- As per Sun GlassFish Mobility Platform technical spec below, for operating systems and platforms i have Windows, but it says development only. What does it mean? Is it that i can not run the Sun "GlassFish Mobility Platform 1.1" in windows system?
Please suggest.
Platforms and Requirements
Operating Systems and Platforms
Solaris 10 Operating System
Red Hat Enterprise Linux 4 and 5
* Windows (development only)*
Application Server
Sun GlassFish Enterprise Server 2.1
Client Platform
Java Platform, Mobile Edition (Java ME)
CDC 1.1.2, CLDC 1.1, MIDP 2.0
Development Kit
J2SE 5.0 and JDK 6
Synchronization Databases
MySQL
* Oracle 9/10This means that we don't support deployments of the gateway server on the Windows OS in a production environment.
The platform deploys and runs fine on Windows, we have systems running the platform on NT, XP and Vista and we support development of Mobility Platform applications on Windows.
-Hans -
Unable to open "Mobile Enterprise Platform Administration Console"
http://localhost:8080/sync/admin/faces/jsp/login.jsp
The above url opens Mobile Enterprise
Platform Enterprise Tier Administration Console.
What is the url for opnening Mobile Enterprise Platform Administration Console?The URL is the same except for the hostname. It should be the host where you did
a single tier install or installed tier1. The "Tier Admininstration Console" comes
up for tier2. -
Admin Console Authentication Fails
When the credentials for a Groupwise System Administrator contains a colon, the authentication fails for the Administration Console...
Recently had same bug fixed in Sentinel's web interface SAML token... Bug 817681Never mind, found that it was admin user that caused the issue. Bug will be written
--Morris
>>> Morris Blackham<[email protected]> 5/19/2014 9:04 AM >>>
when you say credentials, are you referring to the admin name or the password, or both?
Inquiring minds need to know to write a proper defect...
--Morris
>>> ScorpionSting<[email protected]> 5/16/2014 8:36 PM >>>
When the credentials for a Groupwise System Administrator contains a
colon, the authentication fails for the Administration Console...
Recently had same bug fixed in Sentinel's web interface SAML token...
Bug 817681
*Deja Moo:* The feeling you've heard this bull before.
ScorpionSting's Profile: https://forums.novell.com/member.php?userid=1663
View this thread: https://forums.novell.com/showthread.php?t=477090 -
Can't access the console - Authentication failed
Hi,
I've just finished with DS and AM setup (consecutively).
The AM setup was done with Configure Now JES wizard, with Webserver, everything on the same machine - remote doesn't work. Everything fine.
When I try to access the console, I always get the message:
"Authentication failed.
Return to Login page"
I've tried admin, amldapuser, amadmin, amAdmin.
The logs in Directory Server says:
[01/Nov/2006:02:50:44 -0300] conn=137 op=10 msgId=489 - SRCH base="dc=caverna,dc=net" scope=2 filter="(uid=amadmin)" attrs="dn uid"
[01/Nov/2006:02:50:44 -0300] conn=137 op=10 msgId=489 - RESULT err=0 tag=101 entries=0 etime=0
amAuthentication.access:
"2006-11-01 02:47:25" "Login Success|module_instance|Application" Application AUTHENTICATION-105 dc=caverna,dc=net 31329a31876dc65001 INFO "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" "Not Available" "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" "Not Available"
and amAuthentication.error:
"2006-11-01 02:50:44" "Login Failed" LDAP AUTHENTICATION-200 dc=caverna,dc=net "Not Available" INFO "Not
Available" 192.168.254.1 "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" beta.caverna.net
"2006-11-01 02:50:52" "Login Failed" LDAP AUTHENTICATION-200 dc=caverna,dc=net "Not Available" INFO "Not
Available" 192.168.254.1 "cn=dsameuser,ou=DSAME Users,dc=caverna,dc=net" beta.caverna.net
Any suggestions?
Best regards,
Luiz Felipe.I can't remember very well, but I think I reinstalled AM and DS, But I can't remember very well.
BTW, I'm gently answering your question suggesting this tip, but I've gave up about JES. So, don't trust me a lot ;)
Maybe I will try the 2006 version... maybe.
Message was edited by:
luizfox -
Jes2005Q4 AccessManager console Authentication failed
Hi,
I have installed Jes2005Q4(DirectoryServer,AdministrationServer,ApplicationServer,AccessManager) in solaris 9.after starting everything when I am going to access the following page I got the Authentication failed error.
http://andaman.miel.mot.com:8080/amserver/UI/Login?gx_charset=UTF-8
Below is the amconfig script.please give me solution asap.i am struggling a lot
BASEDIR=/apps/vendor/jes
SERVER_HOST=andaman.miel.mot.com
SERVER_PORT=8080
SERVER_PROTOCOL=http
CONSOLE_HOST=$SERVER_HOST
CONSOLE_PORT=$SERVER_PORT
CONSOLE_PROTOCOL=$SERVER_PROTOCOL
CONSOLE_REMOTE=false
DS_HOST=andaman.miel.mot.com
DS_PORT=389
DS_DIRMGRDN="cn=Directory Manager"
DS_DIRMGRPASSWD=admin123
ROOT_SUFFIX="dc=miel,dc=mot,dc=com"
COOKIE_DOMAIN=.mot.com
# ADMINPASSWD, the amadmin password, and AMLDAPUSERPASSWD, the amldapuser passwo
rd, must be set to different values
ADMINPASSWD=admin123
AMLDAPUSERPASSWD=ldapadmin123
CONSOLE_DEPLOY_URI=/amconsole
SERVER_DEPLOY_URI=/amserver
PASSWORD_DEPLOY_URI=/ampassword
COMMON_DEPLOY_URI=/amcommon
COOKIE_DOMAIN=.mot.com
JAVA_HOME=/usr/jdk/entsys-j2se
AM_ENC_PWD=""
PLATFORM_LOCALE=en_US
NEW_OWNER=root
#### Linux installations probably would want to set NEW_GROUP as root as the san
e default value.
NEW_GROUP=other
XML_ENCODING=ISO-8859-1
NEW_INSTANCE=false
############### Web Container type required #######################
# WL6 => weblogic 6.x
# WL8 => weblogic 8.x
# WAS4 => websphere 4.0.5
# WAS5 => websphere 5.x
# WS6 => s1ws 6.1
# AS7 => s1as 7.0
# AS8 => s1as 8.1
WEB_CONTAINER=AS8
############### Required for Web Server ################################
WS61_INSTANCE=https-$SERVER_HOST
WS61_HOME=/opt/SUNWwbsvr
WS61_PROTOCOL=$SERVER_PROTOCOL
WS61_HOST=$SERVER_HOST
WS61_PORT=$SERVER_PORT
WS61_ADMINPORT=8888
WS61_ADMIN="admin"
############### Required for App Server 8.x ################################
AS81_HOME=/apps/vendor/jes/SUNWappserver/appserver
AS81_PROTOCOL=$SERVER_PROTOCOL
AS81_HOST=$SERVER_HOST
AS81_PORT=$SERVER_PORT
AS81_ADMINPORT=4849
AS81_ADMIN=admin
AS81_ADMINPASSWD="admin123"
AS81_ADMIN=admin
AS81_ADMINPASSWD="admin123"
AS81_INSTANCE=server
AS81_DOMAIN=domain1
AS81_INSTANCE_DIR=/apps/vendor/jes/SUNWappserver/domains/domain1
AS81_DOCS_DIR=/apps/vendor/jes/SUNWappserver/domains/domain1/docroot
AS81_IS_SECURE=false
AS81_ADMIN_IS_SECURE=true
############### Required for SSL enabled ################################
SSL_PASSWORD="sample" # used in auto'ly restart container
DIRECTORY_MODE=1
USER_NAMING_ATTR=uid
ORG_NAMING_ATTR=o
ORG_OBJECT_CLASS=sunismanagedorganization
USER_OBJECT_CLASS=inetorgperson
DEFAULT_ORGANIZATION=We faced a similar problem recently and we would like to document the solution for it. The root cause of the problem was traced to the absence of certain index configurations in the Directory Server. Because of this Access Manager was unable to fetch certain data from the backend directory during authentication.
At the time of configuration, Access Manager creates certain indexes in the LDAP Directory under the node: cn=index,cn=<databaseName>,cn=ldbm database,cn=plugins,cn=config.
where <databaseName> is the name of the database storing your Access Manager tree e.g. userRoot.
The indexes are created from the file - /etc/opt/SUNWam/config/ldif/index.ldif.
So if you are facing authentication failure problem - please cross check against the index.ldif file and verify the creation of each index. If index on a specific attribute is missing follow the steps below to resolve this issue:
* Use ldapmodify to upload the file /etc/opt/SUNWam/config/ldif/index.ldif onto each DS instance
ldapmodify -h <host> -p <port> -D "cn=directory manager" -w <pwd> -a -c -f /etc/opt/SUNWam/config/ldif/index.ldif
* Run the command db2index.pl to generate new set of indexes to be maintained by the server.
Regards,
Chetan Mutalik Desai
Persistent Systems -
BPEL Console-Authentication failed.
HI' I am using SOA Suite While Installation of SOA suite I provided it with User name and password and not able to log in to BPEL Console, I am able to log in to Rule Author as it is using the same user name and password as Administrator, did nay one had the same problem before, please help me in this.
thanks
YatanThanks fro reply I have pasted the contents from the todays logs from the file-->"default_group~oc4j_soa~default_group~1.log"
location--> E:\product\10.1.3.1\OracleAS_1\opmn\logs
<2008-12-15 15:28:59,315> <ERROR> <oracle.bpel.services> <::> ORA-28000: the account is locked
java.sql.SQLException: ORA-28000: the account is locked
at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:138)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:316)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:277)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:272)
at oracle.jdbc.driver.T4CTTIoauthenticate.receiveOauth(T4CTTIoauthenticate.java:647)
at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308)
at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:430)
at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:151)
at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32)
at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:608)
at oracle.oc4j.sql.DriverDataSource.getConnection(DriverDataSource.java:116)
at oracle.oc4j.sql.DriverDataSource.getConnection(DriverDataSource.java:75)
at oracle.oc4j.sql.DataSourceConnectionPoolDataSource.getPooledConnection(DataSourceConnectionPoolDataSource.java:57)
at oracle.oc4j.sql.xa.EmulatedXADataSource.getXAConnection(EmulatedXADataSource.java:55)
at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createXAConnection(ManagedConnectionFactoryImpl.java:208)
at oracle.oc4j.sql.spi.ManagedConnectionFactoryImpl.createManagedConnection(ManagedConnectionFactoryImpl.java:167)
at com.evermind.server.connector.ApplicationConnectionManager.createManagedConnection(ApplicationConnectionManager.java:1360)
at oracle.j2ee.connector.ConnectionPoolImpl.createManagedConnectionFromFactory(ConnectionPoolImpl.java:327)
at oracle.j2ee.connector.ConnectionPoolImpl.access$800(ConnectionPoolImpl.java:98)
at oracle.j2ee.connector.ConnectionPoolImpl$FixedWaitPoolingScheme.getManagedConnection(ConnectionPoolImpl.java:1455)
at oracle.j2ee.connector.ConnectionPoolImpl.getManagedConnection(ConnectionPoolImpl.java:785)
at com.evermind.server.connector.ApplicationConnectionManager.getConnectionFromPool(ApplicationConnectionManager.java:1558)
at com.evermind.server.connector.ApplicationConnectionManager.acquireConnectionContext(ApplicationConnectionManager.java:1503)
at com.evermind.server.connector.ApplicationConnectionManager.allocateConnection(ApplicationConnectionManager.java:1449)
at oracle.j2ee.connector.OracleConnectionManager.unprivileged_allocateConnection(OracleConnectionManager.java:238)
at oracle.j2ee.connector.OracleConnectionManager.allocateConnection(OracleConnectionManager.java:192)
at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:197)
at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:142)
at oracle.oc4j.sql.ManagedDataSource.getConnection(ManagedDataSource.java:127)
at oracle.bpel.services.notification.repos.NotificationPersistencyDriver.getConnection(NotificationPersistencyDriver.java:167)
at oracle.bpel.services.notification.repos.NotificationPersistencyDriver.getTransactionService(NotificationPersistencyDriver.java:193)
at oracle.bpel.services.notification.repos.NotificationPersistencyDriver.getInstance(NotificationPersistencyDriver.java:221)
at oracle.bpel.services.notification.repos.Transaction.start(Transaction.java:57)
at oracle.bpel.services.notification.NotificationUtil.getNotifications(NotificationUtil.java:221)
at oracle.bpel.services.notification.queue.sender.Publisher.retryFailedNotification(Publisher.java:380)
at oracle.bpel.services.notification.ejb.impl.NotificationBean.retryFailedNotification(NotificationBean.java:344)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor$1.run(JAASInterceptor.java:31)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:396)
at com.evermind.server.ThreadState.runAs(ThreadState.java:622)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at NotificationServiceBean_LocalProxy_68d4144.retryFailedNotification(Unknown Source)
at oracle.bpel.services.notification.queue.sender.QuartzPublisher.execute(QuartzPublisher.java:89)
at org.quartz.core.JobRunShell.run(JobRunShell.java:191)
at org.quartz.simpl.SimpleThreadPool$WorkerThread.run(SimpleThreadPool.java:516)
Edited by: Yatanveer Singh on Dec 15, 2008 1:59 AM -
I'm trying to set up reverse console access in the lab;
AUX port on router R1 is connected to Console port on switch SW1.
On R1 I have the following configuration;
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa authorization reverse-access default group tacacs+ local
aaa accounting exec default
action-type stop-only
group tacacs+
aaa accounting commands 0 default
action-type stop-only
group tacacs+
aaa accounting commands 1 default
action-type stop-only
group tacacs+
aaa accounting commands 15 default
action-type start-stop
group tacacs+
aaa session-id common
line aux 0
modem InOut
transport preferred telnet
transport input all
transport output all
flowcontrol hardware
I can telnet to R1, and then telnet to its own loopback0 interface on port 2001, which connects me to SW1;
r1#telnet 1.2.3.4 2001
Trying 1.2.3.4, 2001 ... Open
User Access Verification
Username: me
Password:
% Authorization failed.
[Connection to 1.2.3.4 closed by foreign host]
r1#
No matter what configuration I try I always get this "% Authorization failed". I can telnet to SW1, just fine with the following configuration, what's missing to allow reverse access to work correcrtly?
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting exec default stop-only group tacacs+
aaa accounting commands 0 default stop-only group tacacs+
aaa accounting commands 1 default stop-only group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
line con 0
privilege level 15
line vty 0 4
session-timeout 5
access-class 50 in
logging synchronous
transport input all
transport output allHi Andrew,
Thanks for the input but unfortunately I'm still stumped! I can't see why it wouldn't work, a bit more fiddeling, latest configs are below but it seems like it should work to me. I dropped "aaa authorization reverse-access default group tacacs+ local" from R1, now instead of being able to log into SW1 and get the "% Authorization failed." error, I get nothing and it just hangs indefinatly never actually logging in or failing.
R1;
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting exec default
action-type stop-only
group tacacs+
aaa accounting commands 0 default
action-type stop-only
group tacacs+
aaa accounting commands 1 default
action-type stop-only
group tacacs+
aaa accounting commands 15 default
action-type start-stop
group tacacs+
aaa session-id common
line aux 0
transport preferred none
transport input telnet
transport output none
SW1;
aaa new-model
aaa authentication login default group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization console
aaa authorization exec default group tacacs+ if-authenticated
aaa authorization commands 15 default group tacacs+ if-authenticated
aaa accounting exec default stop-only group tacacs+
aaa accounting commands 0 default stop-only group tacacs+
aaa accounting commands 1 default stop-only group tacacs+
aaa accounting commands 15 default start-stop group tacacs+
aaa session-id common
line con 0
privilege level 15 -
Essbase Administration Console error "failed to create client directory to write error file"
I am getting the following error while trying to load data using EAS v11.1.2.3
"failed to create client directory to write error file"
Any known root cause for this.Check the default error directory while loading data? The error file in 11.1.2.2 points to C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\eas\client, which is already on the system where EAS is installed.
If the folder is not there then it is a bug, however you can change it to an existing path.
Regards
Celvin
http://www.orahyplabs.com -
Sconadm timeout - Sun On-line Account authentication failed.
Hello,
I run Solaris 10 5/08 s10x_u5wos_10 X86.
and the registration timeout. See below the basicreg.log
I copy the commands i used. and the output. I also run the suc.sh script and post in the end.
#ping 82.98.86.176
82.98.86.176 is alive
#sconadm register -a -r regfile
sconadm is running
Authenticating user ...
Sun On-line Account authentication failed
failed registration!
telnet cns-transport.sun.com 443
Trying 198.232.168.137...
traceroute to cns-transport.sun.com (198.232.168.137), 30 hops max, 40 byte packets
1 172.30.168.254 (172.30.168.254) 0.409 ms 0.241 ms 0.147 ms
2 125-230-64-254.dynamic.hinet.net (125.230.64.254) 2.334 ms 77.107 ms 1.457 ms
3 tc-kk-t64-2.router.hinet.net (168.95.149.78) 0.937 ms 1.112 ms 0.867 ms
4 220-128-17-98.HINET-IP.hinet.net (220.128.17.98) 1.246 ms tc-c12r12.router.hinet.net (220.128.17.158) 1.252 ms 1.138 ms
5 tp-crs11.router.hinet.net (220.128.2.10) 4.423 ms 4.281 ms 15.803 ms
6 220-128-4-29.HINET-IP.hinet.net (220.128.4.29) 5.076 ms 4.274 ms 4.034 ms
7 r02-s2.tp.hinet.net (220.128.4.38) 16.038 ms 4.358 ms 4.359 ms
8 r12-pa.us.hinet.net (211.72.108.121) 142.842 ms 150.936 ms 142.567 ms
9 r11-pa.us.hinet.net (202.39.83.193) 143.152 ms 142.800 ms 142.830 ms
10 206.111.12.165.ptr.us.xo.net (206.111.12.165) 142.651 ms 142.925 ms 142.852 ms
11 te-11-0-0.rar3.sanjose-ca.us.xo.net (207.88.12.69) 144.081 ms 144.510 ms 144.974 ms
12 207.88.14.117.ptr.us.xo.net (207.88.14.117) 218.322 ms 218.461 ms 217.083 ms
13 207.88.14.118.ptr.us.xo.net (207.88.14.118) 218.363 ms 217.950 ms 218.103 ms
14 207.88.183.54.ptr.us.xo.net (207.88.183.54) 214.827 ms 214.479 ms 216.544 ms
15 border7.te2-2-bbnet2.wdc002.pnap.net (216.52.127.87) 214.862 ms 215.908 ms 214.832 ms
16 seven-6.border7.wdc002.pnap.net (216.52.125.250) 214.658 ms 214.440 ms 214.558 ms
17 * * *
18 * * *
# cat basicreg20081024111737681.log
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicReg loadPropertiesFromHomeDir
INFO: properties file loaded from the default config.properties
24.10.2008 11:17:48 com.sun.scn.util.Utils getLocalHostNames
INFO: get hostname 82.98.86.176
24.10.2008 11:17:48 com.sun.scn.util.Utils getLocalHostNames
INFO: first returned hostname 82.98.86.176
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setHost() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setPort() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setUser() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.NetworkProxyCacaoAdapter setProxy
INFO: SCNNetworkProxyConfigMBean.setPassword() = null
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: userName = [email protected]
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: password = *****
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: hostName =
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI printRegistrationProfile
INFO: portalEnabled =false
24.10.2008 11:17:48 com.sun.cns.basicreg.BasicRegCLI run
INFO: Authenticating user ...
24.10.2008 11:17:48 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter getSCNClientSession
INFO: CREATING SCNClientSession
24.10.2008 11:25:18 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter loginAccount
SCHWERWIEGEND: Error: login account exception: Connection refused to host: 82.98.86.176; nested exception is:
java.net.ConnectException: Connection timed out
24.10.2008 11:25:18 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter loginAccount
SCHWERWIEGEND:
com.sun.scn.jmx.impl.UISClientLoginModule.login(UISClientLoginModule.java:151)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
javax.security.auth.login.LoginContext.invoke(LoginContext.java:769)
javax.security.auth.login.LoginContext.access$000(LoginContext.java:186)
javax.security.auth.login.LoginContext$5.run(LoginContext.java:706)
java.security.AccessController.doPrivileged(Native Method)
javax.security.auth.login.LoginContext.invokeCreatorPriv(LoginContext.java:703)
javax.security.auth.login.LoginContext.login(LoginContext.java:575)
com.sun.scn.jmx.impl.UISClientLogin.login(UISClientLogin.java:201)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
javax.management.StandardMBean.invoke(StandardMBean.java:323)
com.sun.jmx.mbeanserver.DynamicMetaDataImpl.invoke(DynamicMetaDataImpl.java:213)
com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1410)
javax.management.remote.rmi.RMIConnectionImpl.access$100(RMIConnectionImpl.java:81)
javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1247)
java.security.AccessController.doPrivileged(Native Method)
javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1350)
javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:784)
sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
java.lang.reflect.Method.invoke(Method.java:585)
sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
sun.rmi.transport.Transport$1.run(Transport.java:153)
java.security.AccessController.doPrivileged(Native Method)
sun.rmi.transport.Transport.serviceCall(Transport.java:149)
sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:466)
sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:707)
java.lang.Thread.run(Thread.java:595)
24.10.2008 11:25:18 com.sun.cns.basicreg.cacao.ClientLoginCacaoAdapter getLoginResult
INFO: SCN Fault: Connection refused to host: 82.98.86.176; nested exception is:
java.net.ConnectException: Connection timed out
24.10.2008 11:25:18 com.sun.cns.basicreg.BasicRegCLI run
SCHWERWIEGEND: Sun On-line Account authentication failed
#sh suc.sh
User: root
Logname: root
Freitag, 24. Oktober 2008 11:48 Uhr CST
xxx
smpatch settings:
patchpro.backout.directory - ""
patchpro.baseline.directory - /var/sadm/spool
patchpro.download.directory - /var/sadm/spool
patchpro.install.types - rebootafter:reconfigafter:standard
patchpro.patch.source - https://getupdates1.sun.com/
patchpro.patchset - current
patchpro.proxy.host - ""
patchpro.proxy.passwd **** ****
patchpro.proxy.port - 8080
patchpro.proxy.user - ""
smpatch analyze:
Failure: Cannot connect to retrieve detectors.jar: This system is currently unregistered and is unable to retrieve patches from the Sun Update Connection. Please register your system using the Update Manager, /usr/bin/updatemanager or provide valid Sun Online Account(SOA) credentials.
Sun UC patch revision:
120336-04
121082-06
121119-13
121454-02
123004-03
123006-07
123631-03
123896-04
124187-07
Solaris release:
Solaris 10 5/08 s10x_u5wos_10 X86
Copyright 2008 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 24 March 2008
Solaris Kernel: Generic_127128-11
Machine Type: i86pc
Platform: i86pc
Java -version:
java version "1.5.0_14"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.5.0_14-b03)
Java HotSpot(TM) Client VM (build 1.5.0_14-b03, mixed mode, sharing)
Cacao Java version:
java-home=/usr/jdk/jdk1.5.0_14
Software Cluster:
CLUSTER=SUNWCall
All ccr properties:
Property not defined: 18
18:
cns.assetid:
cns.br.SunUCenabled:
true
cns.ccr.keyGenPath:
/usr/lib/cc-ccr/bin/ccrKeyGen
cns.clientid:
cns.httpproxy.auth:
cns.httpproxy.ipaddr:
cns.httpproxy.port:
cns.regtoken:
cns.security.password:
cns.security.privatekey:
cns.security.publickey:
cns.swup.UMautolaunch:
false
cns.swup.autoAnalysis.enabled:
true
cns.swup.checkinInterval:
2
cns.swup.lastCheckin:
0
cns.swup.patchbaseline:
current
cns.swup.regRequired:
true
cns.transport.serverurl:
patchsvr not installed.
Sun UC package status:
SUNWbreg not installed
SUNWdc not installed
Edited by: Denis_Theinert on Oct 24, 2008 4:13 AMI could connect all of this hosts without problems.
# telnet sun.com 80
Trying 72.5.124.61...
Connected to sun.com.
Escape character is '^]'.
^CConnection to sun.com closed by foreign host.
# telnet cns-services.sun.com 443
Trying 198.232.168.133...
Connected to cns-services.sun.com.
Escape character is '^]'.
^CConnection to cns-services.sun.com closed by foreign host.
# telnet getupdates1.sun.com 443
Trying 198.232.168.136...
Connected to getupdates1.sun.com.
Escape character is '^]'.
^CConnection to getupdates1.sun.com closed by foreign host.
# telnet a248.e.akamai.net 443
Trying 60.254.154.75...
Connected to a248.e.akamai.net.
Escape character is '^]'.
^CConnection to a248.e.akamai.net closed by foreign host.
# -
Authentication Failed : BPEL Console and BPEL Admin
Hi ,
I am trying to log in to BPEL Console repeatedly. I am using the user oc4jadmin. I have logged in successfully previously using oc4jadmin.
I read somewhere that a workaround is
"Workaround is you take login_error.jsp off from URL http://<host>:<port>/BPELConsole/login_error.jsp, So your URL would look like http://<host>:<port>/BPELConsole/. This will automatically log you in. Since the problem was with redirection and not with your credentials"
This is also not working for me.
Could it be possible that I have locked this account ? Is so, how can I unlock it .
Any suggestions on why I get repeatedly Authentication Failed ?Hi ,
Thanks for the response .
This the log from opmn/logs/default_group~oc4j_soa~default_group~1.log
09/08/17 14:14:33 ############# statusFilter = ASSIGNED###########
09/08/17 14:14:33 ############# session = oracle.portal.provider.v2.http.ServletProviderSession@1ee1212###########
09/08/17 14:14:33 ############# wlCtxKey = _piref985378135.worklistContext###########
09/08/17 14:14:33 ############# ctx = null###########
09/08/17 14:14:33 ############# wlRmtUserKey = _piref985378135.remoteUser###########
09/08/17 14:14:33 ############# sessionRemoteUser = null###########
09/08/17 14:14:33 ############# currentRemoteUser = null###########
09/08/17 14:14:33 ############# filterPredicate = ( wfn.State IN (?,?))############
09/08/18 13:07:52 BI Beans Graph version [3.2.2.0.24]
09/08/18 13:07:55 Tue Aug 18 13:07:55 CEST 2009 PROBLEM: In oracle.dss.thin.beans.graph.ThinGraph::setTabularData: all relational rows are null
09/08/18 13:07:55 BI Beans Graph version [3.2.2.0.24]
09/08/18 13:07:55 BI Beans Graph version [3.2.2.0.24]
09/08/18 13:07:55 Tue Aug 18 13:07:55 CEST 2009 PROBLEM: In oracle.dss.thin.beans.graph.ThinGraph::setTabularData: all relational rows are null
09/08/18 13:07:55 BI Beans Graph version [3.2.2.0.24]
09/08/18 13:07:55 Tue Aug 18 13:07:55 CEST 2009 PROBLEM: In oracle.dss.thin.beans.graph.ThinGraph::setTabularData: all relational rows are null
09/08/18 13:07:55 Tue Aug 18 13:07:55 CEST 2009 PROBLEM: In oracle.dss.thin.beans.graph.ThinGraph::setTabularData: all relational rows are null
09/08/18 13:09:09
ConnectionPoolManager uiauthpool intialized with url=jdbc:oracle:thin:@//SHK-ORADEVAPP02.HK.INDISKA.SE:1521/orcl.hk.indiska.se driver=oracle.jdbc.driver.OracleDriver user=ORAWSM maxConn=5
[oraias@SHK-ORADEVAPP02 logs]$ -
User Authentication Failed via http BUT not with Visual Administrator !!?
OS : Win 2k3 Server UK * DB : SQL Server 2005
SAP Netweaver 2004s Application Java
Hi All,
Since a couple of days, I have a problem concerning authentication to the java apllication on a SAP Netweaver 2004s.
Using the user Administrator, I CAN logon the Visual Administrator tool, with the same user I tried to logon via http://host:port/nwa without success.
At the beginning, I was thinking about a problem of password then I enabled the emergency user SAP*, the problem was the same. Ok with Visual Administrator but not via http.
Here is two logs found in folder : D:\usr\sap\SID\JC02\j2ee\cluster\server0\log\system\
security.3.log
<i>#1.5#001871E5EA3A00550000006D0000172800043B836D838427#1191335570983#/System/Security/Audit#sap.com/com.sap.security.core.admin#com.sap.security.core.util.SecurityAudit#Guest#0####5aac137070f411dcc513001871e5ea3a#SAPEngine_Application_Thread[impl:3]_11##0#0#Warning#1#com.sap.security.core.util.SecurityAudit#Plain###Guest | LOGIN.ERROR | null | | Login Method=[default], UserID=[Administrator], IP Address=[192.168.10.125], Reason=[Authentication did not succeed.]#</i>
server.0.log
<i>#1.5#001871E5EA3A0052000000130000172800043B835E3661D1#1191335314249#/System/Server/SLDService##com.sap.sldserv.SldServerFrame######c1a349a070f311dcaa68001871e5ea3a#SAPEngine_System_Thread[impl:5]_71##0#0#Warning#1#com.sap.sldserv.SldServerFrame#Plain###Failed to collect SLD data. Failed to send HTTP data: 401 : Unauthorized. Please check if the target SLD system is available and the SLD bridge is started there.#</i>
 I tried to connect http://host:port/sld same problem User Authentication Failed
<b>Do you have an idea for me? Why a user can connect via Visual Administrator and not via the http interface?</b>
Thanks in advance
YvesHi,
I found the solution this last week-end.
This behavior let's thinking to a problem of authentication.
But the problem was in SQL, an index was missing in table J2EE_CONFIG, called J2EE_CONFIG_I3
Cheers
Yves -
Directory server - administration console, system server console fail
The server is solaris 10, with the java 1.4, and the Sun One directory server 5.2 was installed from a compressed file
System Administration Server
System Administration Console
Sun Java(TM) System Server Console
All were installed, but there's no connection to the Administration Console on port 390. Isw there any documentation available that will help to troubleshoot this? Any recommendations as to how to resolve the difficulty?I usually get to the admin console by running /var/opt/mps/serverroot/startconsole.
Its an X application so you will need to have $DISPLAY set. -
Portal administrator authentication failed
Hi all
i instald a new netwaever 2004s portal wite xi and sld abap +Java .
in the installion i used the same password fur all users option,
the installation finish successfully.
when i am traing to logon the portal useng administrator and the password i enter in the installion i get authentication failed,
i dont think i mead a mistake in the password ,
the password is fine in the visual admin and in the sql plus .
Could any one please help on this one.
Thanks and RegardsHi,
if you are able to login to server through SAP LOGON , then you need to check for the authorizations....
from sap easy access you go to SU01 and check for the roles.....and on the Integration Builder screen click on administration and check for the roles in Java Stack....
hopefully you can solve your problem...
Thanks,
Madhu -
Exchange Management Console couldn't start with Kerberos authentication failed
When I was making changes to Client Access\owa settings, chaning from Basic authentication to Form authentication (upn name) then changed to Basic again. It was ok after changing to Form authentication but moment after changing back to Basic, I couldn't
no longer access owa (blank page when one vertical line) and in Exchange Management Console, I got "Initialization failed" - The following error occured while attempting to connect to the specified Exchange server 'sgp-ex1.mydomain.com':
The attempt to connect to http://sgp-ex1.mydomain.com/powershell using "Kerberos" authentication failed: Connecting to the remote server failed with the following error message: The WinRM client cannto process
the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid. For more information, see the about_Remote_Troubleshooting Help topic.
I tried the troubleshooting tool from Exchange team blog:
http://blogs.technet.com/b/exchange/archive/2010/12/07/3411644.aspx. It give 3 possible causes for this error: 1. WSMan module entry is missing from global module section of c:\Windows\System32\InetSrv\Config\ApplicationHost.config; 2. Kerbauth module shows
up as Managed module or has been loaded in the Default Web Site Level; 3. The Path of the Powershell virtual directory has been modified.
I checked carefully, all the 3 causes do not apply to my situation as WSman entry is in order, the Kerbauth is native and local and the path of Powershell virtual directory is correct.
I find that in Application log, there are Event 2297 and 2307 dumped at the time of failure:
The worker process for application pool 'MSExchangeSyncAppPool' encountered an error 'Confiugration file in not well-formed XML' trying to read configuration data from file '\\?\C:\inetpubl\temp\apppools\MSExchangeSyncAppPool\MSExchangeSyncAppPool.config',
line number '2'. The data field contains the error code.
Help is very much appreciated.
Valuable skills are not learned, learned skills aren't valuable.Unfortunately, all the links you provided didn't help.
The first link contains 3 methods:1 Removing WinRM feature and reinstalling. 2 Rename the web.config file in location C:\inetpub\wwwroot 3 Have you installed Microsoft Dynamics CRM 4. I?
As my server is Windows 2008 R2, the first method does not apply. I couldn't find any web.config in c:\Inetpub\wwwroot. The web.config however is found in many times in .netframework and winsxs directories. The 3rd method doesn't apply as I don't have CRM.
The 2nd link contains 3 possible causes. The first 2 are the same as the ones I mentioned in my initial post. I couldn't verify the last cause because when open Exchange Management Shell, I got this error: [sgp.ex1.mydomain.com] connecting to remote server
failed with the following server failed with the following error message: The WinRM client cannot process the request, it cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalide. For more
information, see the about_Remote_Troubleshooting Help topic.
I do not think the user is not remote powershell enabled because the problem happened suddenly, while I was making changes to Authentication settings of OWA(default) in Client Access in Exchange Management Console. If the user account is not remote powershell
enabled, then I couldn't event connect to EMC in the first place.
The last link didn't help because I could open up modules under PowerShell virtual directory in IIS.
I think since the event log is saying MSExchangeSyncAppPool.config and DefaultAppPool.config not well-formed XML, that might be a clue.
In the event id 2307 this is the message:
The worker process for application pool 'DefaultAppPool' encountered an error 'Configuration file is not well-formed XML
' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\DefaultAppPool\DefaultAppPool.config', line number '2'. The data field contains the error code.
Valuable skills are not learned, learned skills aren't valuable.
Maybe you are looking for
-
Adobe Photoshop CS4 Blend Effects HELP !!!
hey is there someone who know how to view already applied blend effects the bad news is that I have the portable version and there is no other file except the .png file what I create with saving the layer ??? please help [removed private info]
-
Thumbnail opens window to watch youtube...how?
I want a thumbnail to display the HTML widget that has the embed code (or even the youtube widget) for a youtube in a properly sized window (say 50px bigger than video). I have looked at a lot of Tips & Tricks type web sites, and have not been able t
-
How to use the UIsegment?
I am in desperate need of someone to help me with my problem! I need to use a UISegmentedController to switch between two different views. At the moment I have two different pages, but ideally I would like to switch between them with the help of a UI
-
All, Any script or method to find out how many users are connected to exchange servers in online mode? Manju Gowda
-
Account Determination - Delivery Order Confirmation Process
Hi Experts, How the Account determination will happen in the Delivery Order Confirmation process. Is the any Account determination analysis tool available to check the same ? Regards Prasath