Sun grid engine
Hi i am very new to sun gride.
Please share documents to learn sun grid specially for admin usage.and workflow.
Thanks in advance
Hi Sajindra,
Check out the Unified scheduler feature of Oracle Database 10g. Unified scheduler allows you to submit jobs that can be both database jobs or non-database jobs (i.e. executed outside the database).
cheers,
Brajesh.
Similar Messages
-
Setting up a grid using SGE(sun Grid engine)
Hi everyone,
We are trying to set up a grid in our university.We are taking the help of SGE(sun grid engine).We have successfully installed the master host. But we are encountering a problem when trying to install
the execution host.
When we type #qconf -sh
the following output is occuring
error: commlib error: can't connect to service (No route to host)
ERROR: unable to contact qmaster using port 6444 on host
"sun.localdomain"
We have added the execution host's name to the submit list on the master host.We've also started the sge_master daemon process on the master host. .
Both the systems are pinging correctly.
We have assigned sge_qmaster the port number 6444 in /etc/services
file on both the systems(master and execution host). The name of
the master being sun.localdomain and the name of the execution host is
sunq.localdomain.
Please provide a solution to this problem,so that i can complete the installation of execution host.ok, i have benn faced this kind problem.
i show you some info, maybe can help you out.
firstly, you need to change some setup files else. like hosts; hosts.equiv; profile; rhosts; and services.
after then, you need to add execute host name to the administrative host list. "./qconf -ah".
and then restart you server head and nodes ( for make sure something effect).
the userful information, you can found in http://www.sun.com/software/gridware/ -
Hi,
Has anyone worked with the Sun Grid Engine (SGE)?
I had some queries regarding SGE
1. Does SGE support some kind of Autoscaling?
I know that there are commands to add Nodes to Grid dynamically, but does this require the Grid to restart after adding the node?
2. how do we interact with the Queue? Is it possible using Galaxy API? or using SGE API?arc_g wrote:
2. how do we interact with the Queue? Is it possible using Galaxy API? or using SGE API?There is one utility in Sun Studio tools, that interacts with SGE. It is "dmake":
http://developers.sun.com/sunstudio/documentation/ss12u1/mr/READMEs/dmake.html
It can build targets in "serial", "parallel", "distributed" and "grid" (SGE) modes.
It is using SGE API to submit tasks to the SGE.
Thanks.
Nik -
Hi,
May i know how can i submit a job to the the sun grid engine for processing?They have a grid engine? Why does nobody tell me these things?
-
Sun grid engine interface with 10g grid services
Hi,
I am a Graduate student in Comp Science. for my parallel class I am looking at interfacing sun Grid engine with Oracle 10g services.But I could not find ant API in oracle for me to use globus or any other oracle native API to call the job scheduling ( or even job submitting) functions in 10g. could any one please enligten me on this.I saw a marketing paper on Oracle globus development kit.But could not find any technical documentation on that regard.
thanks,
sajiHi Sajindra,
Check out the Unified scheduler feature of Oracle Database 10g. Unified scheduler allows you to submit jobs that can be both database jobs or non-database jobs (i.e. executed outside the database).
cheers,
Brajesh. -
Rendering much faster with Sun Grid Engine ?
Is it possible to get Sun Grid Engine to distribute the rendering of Final Cut Pro?
http://en.wikipedia.org/wiki/Oracle_Grid_Engine
Note: Sun Grid Engine is still freeNo.
-
Sun Grid Engine's qacct command fails in epilog file
Hi,
I have installed SGE on my cluster and i am able to submit the jobs . For accounting purpose i want to get the output of 'qacct -j $job_id' in epilog file. But in epilog qacct exits with "Job Id not found error". How to achieve this? Or is there any way to get the job details like 'start time,end time,total run time' etc. in epilog file?
Please help.
Edited by: dmane on Aug 26, 2010 2:06 AMThis forum is about Sun Studio program development tools. Sun Studio is program development suite for creating and analyzing programs written in C, C++, and Fortran. Since your question is about Sun Grid Engine, a product unrelated to Sun Studio, you are unlikely to find answers here.
Normally I direct people to the Open Solaris forums, but SGE is not part of Solaris; it is a separate product.
A good place to start is the main product page:
[http://www.oracle.com/us/products/tools/oracle-grid-engine-075549.html]
Also try [http://blogs.sun.com] Search for "sun grid engine" to find bloggers who specialize in SGE.
If you Google "sun grid engine" you will find other promising links. -
Anyony has dmake and Sun Grid Engine experience ?
Here is my another try to ask for the sharing of using dmake with SGE experience.
Did anyone successfully using dmake+SGE to see compilation performance gain ?
My orginal post at
http://www.opensolaris.org/jive/thread.jspa?messageID=8298
Thanks for your time and sharing
tjWe (development team) have created performance tests to compare
build performance in parallel, distributed and grid modes. Unfortunately
our grid is very small - it consists of 1 system, and in this case dmake
works twice faster in distributed mode, than in grid mode. But there is
no limitation in our implementation of grid mode in dmake, so if a build
has enough independent targets, and there is a large grid system - it will
definitely win.
Thanks,
Nikolay Molchanov -
[Solved] Font problem when trying to start qmon (sun grid engine)
When I tried to start the qmon (queue monitor program), the error message show up as below:
[root@sge01 ~]# qmon
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-bold-r-*--14-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--20-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--12-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--24-*-*-*-p-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-bold-r-*--14-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-courier-medium-r-*--12-*-*-*-m-*-*-*" to type FontStruct
Warning: Cannot convert string "-adobe-helvetica-medium-r-*--10-*-*-*-p-*-*-*" to type FontStruct
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 514
Current serial number in output stream: 525
[root@sge01 ~]#
I have all the fonts from the official depository installed (verified by the command # pacman -Ssq font ). I use LXDE and the system has been updated.
Is there anything I can do to run this program?
Last edited by teetee1 (2013-08-28 04:24:40)Thanks for the link. I was able to solve the font errors quickly, which is great!
Unfortunately some other errors remain:
X Error of failed request: BadName (named color or font does not exist)
Major opcode of failed request: 45 (X_OpenFont)
Serial number of failed request: 478
Current serial number in output stream: 489
I've tried to follow instructions from the links below:
http://ubuntuforums.org/showthread.php?t=1778584
http://www.edaboard.com/thread139363.html
But realized I already have the xorg- 100dpi and 75dpi fonts by checking with the pacman command: pacman -Ssq 100dpi (and 75dpi).
Any help is greatly appreciated. -
Sun BPEL engine sets wrong Content-Type on calling an external web service
I have a WSDL for an external web service (which as it happens is running in Websphere locally) and have implemented it as a
partnerlink on a BPEL diagram in an SOA composite project. The binding style is Document and if you use SOAPUI to test it it
works fine. Tracing on the web service's server shows the SOAP request coming in. It has a content-type of text/xml, as expected. If I do a JUnit test from NetBeans based on this WSDL alone it also works - same result. BUT if I do
a full test and call my BPEL process the invocation of this service from BPEL fails.
On the Test result you see
BPCOR-6135:A fault was not handled in the process scope; Fault Name is http://www.sun.com/wsbpel/2.0/process/executable/SUNExtension/ErrorHandling}systemFault;
(This happens because I did not handle the fault in the BPEL.)
On the trace I see it now has Content-type of application/xop+xml. Why would the Sun BPEL engine change this? I just
accepted the usual defaults when I created the PartnerLink and the Invoke. Anyway, the format of the request doesn't match what the WS server expects, so it fails.
As far as I'm aware I'm just using SOAP1.1. This is NetBeans 6.5 with Glassfish 2.1. I tried with NetBeans 6.7 and it got worse, not better. I would certainly appreciate any advice?
ThanksPerhaps when the BPEL file based process calls the WSDL file to execute,their message communication is not correct.
the head part in the WSDL file should be manually set to "text/xml", or the IDE or Server will use the default value;
for example as follow:
SOAPUI tool would use the default value "text/xml" to request.(depends the tool support).
NetBeans tool would use the default value "text/xml" to request.
when you do a full test and you do not set the head "context-type" value ,the WSDL file use the server's default head
value"application/xop-xml" so that return the contents under the control of the server's default value.
I hope these will be useful for you. -
When Install N1 grid engine 6 as execution host
when I try to install the n1 grid engine6 as the execution host this messege appear
Unsupported local hostname
The current hostname is resolved as follows:
Hostname: linux.site
Aliases: linux
Host Address(es): 127.0.0.2
It is not supported for a Grid Engine installation that the local hostname
contains the hostname "localhost" and/or the IP address "127.0.x.x" of the
loopback interface.
The "localhost" hostname should be reserved for the loopback interface
("127.0.0.1") and the real hostname should be assigned to one of the
physical or logical network interfaces of this machine.
Installation failed.
how can I solve this problem ??
please I need the solving as fast as you canSo before i uninstall, may i know if by uninstalling and reinstalling, i will loose my library?
Uninstalling and reinstalling iTunes shouldn't touch your content or playlists.
That being said, It's still always a good idea to maintain a current backup in case of disasters (of any sort).
i saw your other post on a similar issue where you suggested using a different browser to download the setup. I shall try that meanwhile..
I think you should be okay without having to do that ... that's more for when the iTunes installer doesn't download at all, or gives a "not a valid win32 application" or "invalid signature" message. We seem to be getting beyond that point with your one. -
How can i get rid of the "local" hostname sufix?
i am installing Sun Grid Engine on 4 macpros, but this hostname problem is making the progress a headache.
the cluster tries to resolve hostnames without the "local" sufix, and t fails.
how can i completely remove the "local" suffix on my hostname??
i have tried byt no sucess, this is what i did
at the moment if i type "hostname" i get this
mac-pro-3.local
so i modified /etc/hosts and added a line
myNetworkIP mac-pro-3.local mac-pro-3
it works but only for the same machine, other macs cannot ping or resolve "mac-pro-3".
i dont know what option is there available.
macs are with Leopard 10.5.6
any ideas?
thanks in advance
Cristobali found another solution, and now i dont have the need to remove the "local" suffix
i edited the /etc/hosts file and added what the computer was trying to resolve from the server, with an alias.
#this line
ipAddress mac-pro-3.local mac-pro-3 -
I need to setup a render farm that supports the following applications:
Adobe After Effects, Final Cut Pro, Motion, Shake, Houdini, Modo, Maya, Cinema4D and Compressor.
What would I need?
Does Xgrid support these apps or is the Sun Grid Engine a better bet?
Sun Engine Grid
http://gridengine.sunsource.net/
XSan is a must unless ZFS is a better option not too sure if it would be compatible though. What RAID arrays would work best? Can I use the Sun StorageTek 6140 array with the XServe being that XRaid is no defunct (Promise RAID looks iffy, not to mention ugly).
How would I manage the Queues (Can I run multiple Queue Applications to support different apps i.e. Apple Qmaster and Sun Grid Engine)?
RUSH http://www.seriss.com/rush/
Dr. Queue http://drqueue.org/cwebsite/
Qube http://www.pipelinefx.com/
Anyone with experience.
Thanks,
JuanWell I mentioned ZFS mainly because the Sun StorageTek Array supports ZFS and XSAN looks somewhat similar to ZFS in that the storage is pooled. I imagine Apple is planning on replacing XSAN with ZFS in the not too distant future, if so Sun Storage looks great!
Regarding Qmaster, I'm going to investigate further. Its supposed to work according to Apple's advertising:
Clusters for encoding and rendering
Q Master
Qmaster uses the processing capacity of your network computers for a wide range of tasks, including encoding and rendering for motion graphics produced by applications *such as Apple Shake, Adobe After Effects, and Autodesk Maya.* Configure Qmaster clusters to run jobs for encoding, rendering, or both, and change the configuration in a few simple steps. You can output files faster than ever by configuring clusters to take advantage of multiple processors, or “services,” as well as multiple computers. For even faster throughput, configure Qmaster to manage individual processors in each computer, turning any Mac Pro into a virtual render farm. To further optimize your workflow, create clusters to be used for specific jobs, users, or applications.
http://appleclub.com.hk/finalcutstudio/compressor/encoding.html
Modo seems to have network rendering built in as well. Still waiting for the Mac version of Houdini to test it out. I've also have been playing with Real Flow.
I'll keep updating the post if I find anything.
Thanks,
Juan -
SGE intermediate job usage info
Here I have a problem with SGE reporting:
The User Guide document says "For N1GE 5.3 systems, only one record exists per finished job, array task and parallel task. The ju_curr_time column holds the job�s end time (j_end_time in
sge_job).
for N1GE 6.0 systems, the online usage is stored as well; this results in multiple records for one job, array task, and parallel task stored in sge_job. The resource
usage of a job can be monitored over time (ju_curr_time)"
I have installed N1GE 6.0 u4, but I still can not see the multiple records as what the doc says. I only got one record as the job is finished.
Anybody know how to solve this prolem? Is there any configuration need to be done? Any comment will be appreciated.Your question is about Sun Grid Engine (SGE).
Most of the engineers who answer questions here don't use SGE,
so you might not get a good answer. You can find more information
about the Grid Community here:
http://developers.sun.com/techtopics/grid/community.jsp
There are mail aliases and web sites listed there. Maybe one
of those resources would be a better place to ask your question.
--chris -
Is it possible to rename the the master host (qmaster) once it has been setup or does that require a reinstall of qmaster? Any help would be appreciated. Thanks
Migration of Qmaster to Another Machine: http://gridengine.sunsource.net/howto/sge_migrate.html
BTW, I believe the question belongs to the Sun Grid Engine mailing list: http://gridengine.sunsource.net/maillist.html
Rayson
Maybe you are looking for
-
How can I change the style of a google map in Adobe Muse?
I have seen some nice changes of google maps out there. This tool helps you to customize your maps. http://gmaps-samples-v3.googlecode.com/svn/trunk/styledmaps/wizard/index.html When I want to integrate a google map I copy in something like this: <if
-
Is there anyway to import my file title like img_001 into my file info so it will show up in my metadata?
-
How to delete a activity type from KP26 which has executed KSS2 and KSII?
Hi experts, I maintain three activity type to one cost center by KP26 cost center 1: activity type 1 activity type 2 activity type 3 last month I run KSS2 to split the price and also run KSII, so these three activity already have actual cost
-
Hi Experts I am working on SOAP-->IDoc scenario where i am using a common business service and different channel for different messages from same web service. Since the different messages are coming from the same webservice ( this is the reason why i
-
hi, send me how to create the info type and the subtype through pdf. regards in advance, pandu.