Sun iplanet console connect problems

Hello,
We've changed the ldap port from 389 to 390, we did this via the iplanet console.
Restarted ldap, everything OK.
Now we want to change it back to 389, but we can not connect with the iplanet console.
It looks like that the console besides the 27400 also connects to port 389 which is not running.
Any help would be great
Regards,
Dirk

hello,
problem solved: read the following
If you want to change the port number of the Configuration Directory Server used by your Administration Server, you can use either the following GUI or CLI instructions (391575)(391363):
GUI Instructions:
Open the Directory Console and select the Configuration tab.
Change the LDAP port to a new value
Click OK. The success dialog tells you to restart the server for the changes to take effect. Do not quit Console.
Restart Directory Server from the command line.
Next, change the Administration Server LDAP port with the following steps:
In Console, select the administration server that you want to change, and then click Open.
Click the Configuration tab, click Settings, and then change the value for Port.
Click OK. The success dialog tells you to restart the server for the changes to take effect.
Quit Console.
Restart Administration Server
To change the Administration Server LDAP port from the command, use the following instructions:
Command Line Instructions:
Go to the Administration Server's server root and make the following changes:
Open /admin-serv/config/adm.conf and change LDAP port to the new Configuration Directory Server port number.
Open /shared/config/dbswitch.conf and change the directory default URL to reflect the new port number.
Restart Administration Server. When you launch Console, it will point to the new Configuration Directory Server port.
Note: The above steps are performed for each individual Administration Server in the topology that will use a new Configuration Directory Server.
Regards,
Dirk

Similar Messages

Console Connection problem

I am trying to connect from my Windows 7 machine through IE 8. I can create machines do almost everything I need to except connect to the console.
The error I get is below.
I am able to VNC into the machine that I have VM Manager installed on which is centos 5.0 and connect to the console just fine.
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:https://oraclemgr:4443/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class

Firefox won't help you I'm afraid - the problem is actually at the server end not the client.
What you actually need to do is install TightVNC on your Oracle VM Manager node.
You can get it from http://oss.oracle.com/oraclevm/manager/RPMS/
You will then have to close down your browser on your Windows 7 machine and reconnect to the Oracle VM Manager system and try the console again. It will moan briefly about the certificate but accept it and carry on - you should not get the Java error again.
I found this a great help because the cursor control on my Oracle VM Manager is nearly imposible because I am 5000 miles away from it and over an ILO connection, but with TightVNC on my laptop I can get the same GUI up with mouse control that is as good as local!
Let me know if this fixes yours too!

Sunone Server console connectivity problem

I am not able to connect directory server through console , getting following error message
Cannot logon because of an incorrect userID,
Incorrect password or Directory Problem
HttpException:
Response: HTTP/1.1 500 Server Error
Status: 500
URL: http://10.0.2.4:52103/admin-serv/authenticate
but i am able to connect from other ldapbrowsers ...and directroy server is running what could be be problem with console...
Any advise will be appreciated.
Thank you.

try this
http://swforum.sun.com/jive/thread.jspa?threadID=48144&tstart=0
see reply #5

SCCM console connection problem to SMS provider

I have installed sccm in the bolw deisgn for the lack of Cluster test environment. It is just to test SCCM HA.
SQL 2008 and SCCM 2012 Site server in two separate physical box(win 2008) and installed additional sms provider to another windows 2003 box. I am trying to connect the console installed on SQL box to new SMS provider(win 2003 box). It does
not connect. What could be the reason? Is it possible by technology at all or not? If it is, how could it be possible?
Thanks
Rafiqul

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

Root Cause Analysis (OS and DB - OS Command Console) Connection problem!

Dear Community,
i've got a problem with the Root Cause Analysis OS Command console!
Currently I try to read the System MemStat info from the console, without success!
I've got the following errors:
Error1:
Error to parse the data returns by 'SAPOSCol', cause :com.sap.smd.plugin.remoteos.exception.SAPOSColDataParserException: Unknown Error during the parsing of saposcol output; nested exception is:
java.lang.NullPointerException
Error2:
'SAPOSCol' Service not availbale, detail :com.sap.smd.plugin.remoteos.exception.SAPOScolNotAvailable: SAPOSCol not available (detail output: )
The saposcol service is running, when I look on the server, I've got the correct status:
server:<sid>adm> saposcol -s
Collector Versions :
running : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux
dialog : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux, 2007/02/16
Shared Memory       : attached
Number of records   : 5758
Active Flag         : active (01)
Operating System    : Linux server 2.6.5-7.283-smp #1 SMP Wed Nov 29
Collector PID       : 9536 (00002540)
Collector           : running
Start time coll.    : Wed Apr 23 15:00:58 2008
Current Time        : Wed Apr 23 15:12:08 2008
Last write access   : Wed Apr 23 15:12:04 2008
Last Read Access   : Wed Apr 23 15:12:03 2008
Collection Interval : 10 sec (next delay).
Collection Interval : 10 sec (last ).
Status              : free
Collect Details     : required
Refresh             : required
Header Extention Structure
Number of x-header      Records : 1
Number of Communication Records : 60
Number of free Com.     Records : 60
Resulting offset to 1.data rec. : 61
Trace level             : 2
Collector in IDLE - mode ? : NO
become idle after 300 sec without read access.
Length of Idle Interval : 60 sec
Length of norm.Interval : 10 sec
The strange thing is, sometimes it works, sometimes not!
Any Ideas?
System: Solution Manager 4.0 SP Stack 13
Thanks and regards
Sascha

>   running : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux
>   dialog : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux, 2007/02/16
I suggest you upgrade your saposcol on the Linux box, it's more than a year old and it's possible, that the SMD client needs a newer version that provides the data you're requesting.
Markus

Problem with SUN Iplanet App server 6.0

The iPlanet server hangs suddenly with one of the KJS engines being halted. Following is the error message we see in logs.
The only thing we do is to restart the server, to bring it to normal state again. We also tried increasing the JVM size to 256mb from 128mb . But still having this problem.
Can any one help us on this issue?
Thanks,
Srini.
[09/Nov/2004 17:25:24:1] error: Exception: SERVLET-execution_failed: Error in ex
ecuting servlet StaticServlet: java.lang.NullPointerException
Exception Stack Trace:
java.lang.NullPointerException
at com.netscape.server.deployment.AppCompGDSUtil.getDescriptorFromGDSByK
ey(Compiled Code)
at com.netscape.server.deployment.WebAppCompGDSUtil.getDescriptorFromGDS
ByKey(Compiled Code)
at com.netscape.server.deployment.AppComponentDescriptorUtil.createWebAp
pComponentDescriptorCore(Compiled Code)
at com.netscape.server.deployment.DescriptorManager.getWebAppDescriptorF
romCache(Compiled Code)
at com.netscape.server.servlet.servletrunner.StaticServlet.service(Compi
led Code)
at javax.servlet.http.HttpServlet.service(Compiled Code)
at com.netscape.server.servlet.servletrunner.ServletInfo.service(Compile
d Code)
at com.netscape.server.servlet.servletrunner.ServletRunner.execute(Compi
led Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.applogic.AppLogic.execute(Compiled Code)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Native Method)
at com.kivasoft.thread.ThreadBasic.run(Compiled Code)
at java.lang.Thread.run(Compiled Code)
[09/Nov/2004 17:25:24:2] info: REQ-012: thread add

Hi Friends,
I have installed SUN Iplanet App server 6.0. I want to save some file in the system using Iplanet server and want to access that file using Iplanet.
could anyboby help me?
Thanks,
Sunil Jain

App Server 8.1 JDBC Connection problem

Dear Expert,
Cu are using Sun Java System Application Server Enterprise Edition 8.1. Cu created one jdbc connection pool and datasource. They are called
jdbc/RM
From the App Server Admin Console -> Connection Pool, cu can "Ping" the database via the connection pool.
Cu did the configuration on web.xml and sun-web.xml
web.xml
<resource-ref>
<description>Oracle Database Connection - Rawmart</description>
<res-ref-name>jdbc/RM</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
sun-web.xml
<resource-ref>
<res-ref-name>jdbc/RM</res-ref-name>
<jndi-name>jdbc/RM</jndi-name>
</resource-ref>
In customer class,
220: protected void initDataSource() throws NamingException {
221: initContext = new InitialContext();
222: envContext = (Context) initContext.lookup("java:comp/env");
223: String dataSource = rConfigObject.getConfigValue("DATASOURCE");
224: rDataSource = (DataSource) envContext.lookup(dataSource);
225: }Exception occurs on line no. 222 already.
From server.log, we get
================
#|2005-06-03T11:36:11.562+0800|WARNING|sun-appserver-ee8.1|javax.enterprise.system.stream.err|_ThreadID=10;|
javax.naming.NameNotFoundException: No object bound for java:comp/env [Root exception is java.lang.NullPointerException]
at com.sun.enterprise.naming.java.javaURLContext.lookup(javaURLContext.java:161)
at com.sun.enterprise.naming.SerialContext.lookup(SerialContext.java:288)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at com.ns.DBObject.initDataSource(DBObject.java:222)
at com.ns.DBObject.connectPool(DBObject.java:213)
at com.ns.DBObject.<init>(DBObject.java:91)
at com.ns.DBObject.getInstance(DBObject.java:122)
at com.ncharter.NCContextListener.contextInitialized(NCContextListener.java:28)
at org.apache.catalina.core.StandardContext.listenerStart(StandardContext.java:4010)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:4525)
===============
Do you have any ideas on this problem? Thanks.
Regards,
Angus

Try asking the Customer to fire up the JNDI browser in the admin console and try to browse the JNDI tree.
What class is the InitialContext.lookup() happening in? Is that getting executed in the servlet class or a standalone client?
thanks.

LDAP Instances doesnt show up on Sun Server Console

Hello guys,
I am having a wierd problem with Sun Java Directory Server. I have a bunch of LDAP instances running but I am not able to view them on Sun Server Console. I can see slapd processes running on Windows Services and Task Manager. I can also connect to these instances through LDAP Browser. FYI: I am running Sun Java Directory Server 5.2.4 on Windows 2003 Std SP1. Any help is greatly appreciated.
Thanks.

Thanks Ludovic. Netscape root was corrupted when we deleted an instance. We had to import back netscaperoot.ldif from our LDAP backup. If anyone has a similar problem, Check if all the directory server instances are showing up under Server Group. If all the instances show up, launch console in debug mode and see if console cannot access anyone of the instances properly.
D:\Sun\MPS>startconsole -D 9:all -f "D:\console_debug". FYI: You can use saveconfig.bat to backup Netscaperoot as an .ldif file.

Re: [iPlanet-JATO] Experiencing problem while executing model.

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

Hi Todd,
Thanks a lot for your input!
In the case , I found that "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is alaised as a
column name in the resultset. So I am using this as a column in Jato
Descriptor for Plan_Dt. Now it is working fine.
Thanks and Regards,
Santa.
----- Original Message -----
From: Todd Fast <toddwork@c...>
Sent: Thursday, July 26, 2001 9:50 AM
Subject: Re: [iPlanet-JATO] Experiencing problem while executing model.
Santa--
I am experiencing a problem while executing a bounded model. I am usingQueryModelBase. Whenever the following query gets executed inonBeforeModel
execute of TiledView, it throws an exception describing "PLAN_DT not found
in ResultSet". If you execute this query on the SQL prompt then we getrows
of data. Please could you tell us how the mapping between model and
resultset works ? And what changes do we have to make to execute thisquery.
>>
SELECT PART_NM,NEWTXTDOLL
TO_CHAR(PLAN_DT, 'MM/DD/YYYY'),
FROM cpsselect
WHERE CHG_DT >= TO_DATE('2001-06-17', 'YYYY-MM-DD')The mapping of result set to model is done via JDBC, using the columnnames
you provide in your model's column descriptors. It sounds as if you are
providing the column name "PLAN_DT" in a descriptor, and when the model
tries to look up that column in the result set, there is no such columnand
the operation fails.
In order to debug this, you should try running your query with a JDBC
connection, not SQL*Plus or your command-line SQL tool. What you need to
find out is how the expresion "TO_CHAR(PLAN_DT, 'MM/DD/YYYY')" is aliasedas
a column name in the resut set. The easiest way to do this is to write a
simple class that does nothing but use your JDBC driver to connect the
database and execute this query. After execution, use theResultSetMetaData
information to find out the column names for the result set. Then, use
these column names in your JATO column descriptors.
Another Problem:We are not getting the values for NEWTXTDOLL column whenwe try to display it in a Tiled View.
I'm sorry, this isn't enough information for me to offer any suggestions.
Using the technique above, determine which columns are coming back in the
result set, and make sure your display fields in the TiledView are boundto
those column names. The problem could be something as simple as a typo in
the field's bound name, or something more complex like the column in the
result set being named something you don't expect.
Another approach might be to alias the columns yourself using the "AS
<alias>" expression, and assign them names that you choose instead ofusing
the names assigned by the database or JDBC driver.
Todd
[email protected]
The Information contained and transmitted by this E-MAIL is proprietary to
Wipro Limited and is intended for use only by the individual or entity to
which
it is addressed, and may contain information that is privileged, confidential
or
exempt from disclosure under applicable law. If this is a forwarded message,
the content of this E-MAIL may not have been sent with the authority of the
Company. If you are not the intended recipient, an agent of the intended
recipient or a person responsible for delivering the information to the named
recipient, you are notified that any use, distribution, transmission,
printing,
copying or dissemination of this information in any way or in any manner is
strictly prohibited. If you have received this communication in error, please
delete this mail & notify us immediately at mailadmin@w...
[Non-text portions of this message have been removed]

10.4.5 connection problems

I recently upgraded to 10.4.5. When I used 10.3.9 my wireless connection was fast and dependable. Since my upgrade my connection and download speeds are a tenth of what they were using 10.3.9. Looking through these posts I see lots of people are experiencing connectivity problems with 10.4.5. I am almost ready to back up, reformat and go back to 10.3.9. Maybe somebody has some suggestions. My setup is as follows:
1) Cable modem connected to a Linksys Wireless G Access Point.
2) Third party (Buffalo) Wireless G card in the G4 (worked great with 10.3.9).
3) Unencrypted wireless network (my house is far enough from the neighbors that security isn't really a concern).
4) 2 windows computers connected via ethernet cables to the access point.
5) 1 windows computer with a wireless G USB adapter.
6) Wireless bridge connecting game consoles.
Thanks,
Rick

I have upgraded my network to 10.4.5 and have not experieced any issues with my ibook and my collegues powerbook which connect wirelessly.
I have a cable modem connected to a linksys wifi router without any issues.
However I am not using 3rd party wireless cards. It would sound like the airport driver that ran your card worked better for you under 10.3.9. Rather than revert your OS back to 10.3.9 have you considered using the older airport driver?
There are 2 airport kernel extensions on my 10.4.5 system
/System/Library/AppleAirport.kext
/System/Library/AppleAirport2.kext
You could use a utility such as pacifist to extract the airport.kexts from your panther disk and replace them in your current OS.
This hack may or may not work, I have not tried it myself. I dont endorse hacking systems other than my own or provide a guarantee it will work it is just an idea. So be sure to make a backup of your original extensions.

Sun Management Console doesn't support MD5 passwords?

I recently converted all our Sun systems to use MD5 passwords, using the Linux-BSD algorithm. I chose the Linux-BSD algorithm for compatibility reasons. After giving root a new password, now stored in MD5 format, I can no longer log in to the Sun Management Console (smc). I had the same problem with DB2. Switching root's password back to CRYPT fixed the issue.
Is this a known problem that Sun is working on? And how does this happen? Shouldn't the application leave authentication to the OS?
Mark

IIRC the Solaris 10 Basic admin guide talks about this issue.
alan

NullPointerException at com.sun.jndi.ldap.Connection.run(Connection.java:52

We are using the Sun jndi 1.2.1 files from a Java client to
access the IBM SecureWay Directory 3.2 server. Our test case is
retrieving entries using the ctx.getAttributes (String, String[])
method. Occasionally we are receiving the following error.
java.lang.NullPointerException
at com.sun.jndi.ldap.Connection.run(Connection.java:525)
at java.lang.Thread.run(Thread.java:481)
The java.lang.NullPointerException is coming from the Sun JNDI file.
Our program is not catching this exception.
Has anyone seen this problem before and have any ideas on how this can be resolved?

Download and use LDAP 1.2.3 or JDK 1.3.1.
The problem should go away.

Fail to Delete synchronize oid with sun/iPlanet

I intergrated OID with SUN iplanet with external authen. iPlanet is the master and oid read
user information from iplanet. The password of user store in iPlanet only.
After setting up SunOne/Iplanet Synchronize with OID, Adds and Changes work but Deletes Do Not Work.
In IplanetImport.aud file , I found error like this :
25 : Success : DELETE : * : Attempt to synchronize deletion. Entry is not found. Ignore.
How to solve this problem ?
Regards
Sukunya

If it is on 10.1.2.3 Apply the patch 10.1.2.3 ARU 10350043 completed for Generic Platform

How to solve Oracle SQL Developer connection problem ?

Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?

user8860348 wrote:
Folks,
Hello. I am using Oracle Database 11gR1. The Database Control Console https://localhost.localdomain:1158/em works correctly. I can create a Database and a table successfully.
My OS is Linux and connects to internet successfully.
In order to run SQL statements. we need to use Oracle SQL Developer. I connect Oracle SQL Developer in the following way:
Connection Name: DB1 (this is my database name as well)
Username: SYS (this is the user name I used to login to the Console)
Password: SYS (this the password used to login to the Console)
Connection Type: Basic
Host Name: localhost
Port: 1158
SID: DB1 (this is created during installing the Database)
But the error message comes up: "Status: Failure - IO exception Connection Reset."
Can any folk tell me how to solve Oracle SQL Developer connection problem ?username: sys
password: enter_your_correct_password given at the time of oracle installation
role: select sysdba if you would connect as sysdba else select normal for users other than sys
hostname: enter your oracle server hostname or ip address eg:- 192.168.11.12
to find the hostname open terminal/command prompt in oracle installed machine
type ---> hostname
type ---->ping hostname
you can find the ipaddress of the server
port number: 1521 (default) ----> i guess , else check the port number in the tnsnames.ora file under your ORACLE_HOME/network/admin folder
SID: DB1
try it
Good Luck

Sun iplanet console connect problems

Similar Messages

Maybe you are looking for