Sun Java System Communications Express 6

Does anyone have information about Sun Java System Communications Express?
Has it been released? What are your opinions, etc?
Thanks,
GB

i started with schema 2
so installed directory identity - verified them
ran instalelr again and instaleld messagign , calendar - tested them
then installed communicatiosn express and configured as per setup docs - configured them for identity sso not messaging sso
l8r

Similar Messages

  • Java System Communications Express attachment problem

    Hello everyone, please excuse my ignorance on this query as I have very little to do with the Java language and I've really approached this forum as I've run out of ideas for the problem my customer has.
    The customer is connecting to a 'Sun Java System Communications Express' server, from approximately 20 PC's. 2 of the PC's have a problem that is not user based because if they sign in elsewhere their problem disappears and likewise if someone signs into their PC, they experience the same problem.
    If the user receives an email with an attachment and forwards it to a recipient, no problem.
    If the user recieves an emal with an attachment and forwards it to themselves, no problem.
    If however, the user tries to send an email with an attachment (which for all intents and purposes seems to take the correct amount of time to upload, and when you click save appears in the message attached) the attachment disappears, including if you simply save the message in drafts and do not actually send it.
    I have tried uninstalling and reinstalling versions 5 and 6 of Java, resetting the web settings using both IE6 and IE7 (unfortunately the initial secure server refuses any other connections from Firefox / Netscape / Opera / Safari therefore I can only test with IE)
    I have disabled all additional addons, disabled all non-microsoft startup services, disabled all startup programs.
    As you will appreciate, I've done a fair and reasonable amount of testing and simply cannot work out why the attachment fails to stay with the email on these two machines. Help on this problem would be very much greatly appreciated.
    Many Thanks
    Tony

    Unfortunately I do not have access to version information of the server as I am only have access to the client end. All that I can provide you with is the fact that it works on 18 identical systems. The missing attachment(s) occur regardless of whether you save the message to draft or send the message. It should be noted however that if you receive an attachment with a message and save that to drafts, the message retains the attachment so it only seems as though it is affected during the phase of attaching the file to the message from the local PC. The environment that the client is working in uses a verified certificate and is connected through https.

  • Blank Page with sun Java System Calendar Express and IE6

    Hi Everybody,
    I saw a few threads related to my problem, but no solutions ....
    When I try to open the Sun Java System Calendar Express web-interface with IE6, I get a blank page after the initial logon-screen. IE7 and Firefox do not show this problem - so I assume the server itself is working fine.
    I run SJS-CS v6.3 with patch 121659-18 on Linux.
    Otherwise the calendar server is working just fine - problem is, that I cannot switch all users to new/other browsers ...
    Any ideas ?
    Cheers, Stefan!

    stefvienna wrote:
    I saw a few threads related to my problem, but no solutions ....
    When I try to open the Sun Java System Calendar Express web-interface with IE6, I get a blank page after the initial logon-screen. IE7 and Firefox do not show this problem - so I assume the server itself is working fine.What have you got set for the following ics.conf attributes?
    render.xslonclient.enable
    ui.toolbar.repainting.enable
    I run SJS-CS v6.3 with patch 121659-18 on Linux.Let me just point out that calendar express is deprecated with CS6.3 (no more features/enhancements) so you should be looking to move to UWC/CE.
    Otherwise the calendar server is working just fine - problem is, that I cannot switch all users to new/other browsers ...Did this problem start when you upgraded to 6.3 or is this a new installation?
    Regards,
    Shane.

  • Please help with Sun Java System Communications Sync crashe with IEx 7.x

    Dear All!
    Recently i've upgrade my IExplorer to 7.x version. After that i began to have problems with Communications Sync (latest version). When i try to sync Outlook 2003 with the server (SSL connection/ self signed certificate) the Comm Sync asks if i want to allow to open connection with wrong certificate (happed only after installing IEx 7.x) and then when i press YES it crashes.
    Any help on how to fix this problem is appriciated.
    Konstantin
    P.S.: Adding a self signed certificate to IEx DB and adding the website to the trusted websites list did not help.

    Hi,
    Not sure how much we can help with this issue - especially if you are already running the latest version of the sync tool. About all I can offer is to uninstall your current sync software and reinstall the latest public version:
    http://sunsolve.sun.com/private-cgi/getpatch.pl (search for patch #124734).
    If that doesn't help I suggest you log a sun support case for this (assuming you have a sun support contract that is).
    Regards,
    Shane.

  • Sun Java System Calendar Express  Help

    I've set up an appointment on Calendar Express and when I look at the calendar of the room I've set the appointment in, it's not there. I can see the appointment in my own calendar (both Outlook 2003 and Calendar Express), but not in the calendar of the location of the meeting (until about 24-48 hours later). Can somebody please help me figure out why meetings aren't being posted until a day or two after the initial setup?

    Check the Time Zone of the conference room calendar. Is it set to a different zone than your default (Home) calendar?
    GB

  • Sun Java System Access Manager 7.1 config. failed during installation

    {color:#0000ff}Hi,
    I have installed sun java communication suite 5 on a single host on sun solaris 10.
    I have installed required packages and it works fine.
    But as per organization need, I have to change domain name.
    So i have uninstalled everything and tried to install again with new domain name.
    I have made proper entries in hosts file and resolve.conf file.
    But duing the first phase of installation only , i failed in configuring access manager 7.1
    I have also cerate same scenario in my test environment, but everytime i face the same error.
    and sun java access manager 7.1 fails in first stage of installation only.
    So would like to know the proper installation procedure while i change the domain name on same hardware...
    I have checked both installation logs & summary logs.
    But no error, no failed , no severe.
    Attached is the summary of installation logs.
    Summary Logs :
    Installation Summary Report
    Install Summary
    Sun Java(TM) Communications Suite : Installed
    Sun Java(TM) System Web Server 7.0 : Installed, Configured
    Java DB : Installed, Configure After Install
    Sun Java(TM) System Message Queue 3.7 UR1 : Installed
    Sun Java(TM) System Monitoring Console 1.0 : Installed, Configure After Install
    Sun Java(TM) System Directory Preparation Tool : Installed
    Sun Java(TM) System Directory Server Enterprise Edition 6.0 : Installed, Configured
    Sun Java(TM) System Access Manager 7.1 : Installed, Configuration Failed
    Sun Java(TM) System Messaging Server 6.3 : Installed, Configure After Install
    Sun Java(TM) System Communications Express 6 : Installed, Configure After Install
    Communication Services Delegated Administrator : Installed, Configure After Install
    Configuration Data
    Sun Java(TM) System Web Server 7.0 :
    Web Server Instance installation Directory : /var/opt/SUNWwbsvr7
    Web Server installation Directory : /opt
    Web Server Administration Server Host : RADAGWMSG221.myreliancemail.com
    Web Server Admin Server Mode : true
    Web Server only CLI installation : false
    Sun Java(TM) System Directory Preparation Tool :
    Directory Preparation Tool Installation Directory : /opt/SUNWcomds
    Sun Java(TM) System Directory Server Enterprise Edition 6.0 :
    Directory Server Installation Directory : /opt/SUNWdsee
    Sun Java(TM) System Access Manager 7.1 :
    Access Manager Installation Directory : /opt
    Access Manager Protocol : http
    Access Manager Port : 80
    LDAP User ID : amldapuser
    Administrator User ID : amAdmin
    Web Container : WebServer
    Access Manager Web Server Host Name : RADAGWMSG221.myreliancemail.com
    Access Manager Web Server Instance Directory : /var/opt/SUNWwbsvr7/https-RADAGWMSG221.myreliancemail.com
    Access Manager Web Server Port : 80
    Access Manager Console Host (for Existing console) : RADAGWMSG221.myreliancemail.com
    Access Manager Console Deploy URI : amconsole
    Access Manager Password Deploy URI : ampassword
    Access Manager Host : RADAGWMSG221.myreliancemail.com
    Access Manager Console Port(for Existing console) : 80
    Access Manager Services Deploy URI : amserver
    Access Manager Cookie Domain List : .myreliancemail.com
    Access Manager Common Domain Deploy URI : amcommon
    Access Manager Directory Server Host Name : RADAGWMSG221
    Access Manager Directory Server Host : RADAGWMSG221.myreliancemail.com
    Access Manager Directory Server Port : 389
    Access Manager Directory Root Suffix : o=rmail
    Access Manager Directory Manager DN : cn=Directory Manager
    Organization Marker Object Class : sunISManagedOrganization
    User Marker Object Class : inetorgperson
    Organization Naming Attribute : o
    User Naming Attribute : uid
    Sun Java(TM) System Messaging Server 6.3 :
    Messaging Server Installation Directory : /opt/SUNWmsgsr
    Sun Java(TM) System Communications Express 6 :
    Communications Express Installation Directory : /opt/SUNWuwc
    Communication Services Delegated Administrator :
    Communication Services Delegated Administrator Installation Directory : /opt/SUNWcomm
    {color}

    Rushi-Reliance wrote:
    Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
    Regards
    Shane.

  • Adding a JDBC driver in Sun Java System Web Server 7

    I'm trying to configure JDBC database connection pooling for a Microsoft SQL Server 2005 Express Edition though the Sun Java System Web Server 7 administration console. I don't want to use the MSSQL JDBC driver that comes bundled with the SJSWS 7. So I've downloaded the lastest MSSQL JDBC driver from the Microsoft website and put in the "lib" subdirectory of the SJSWS installation directory. So when I go to add a new JDBC resource through the administration console, the newly added MSSQL database driver doesn't appear in the "Driver Vendor" drop-down box.
    How do I add the downloaded JDBC driver to the server so that it appears in the "Driver Vendor" drop-down under "Create JDBC resource".

    Check this documentation from MS on using the JDBC driver with DataSource
    http://msdn2.microsoft.com/en-us/library/ms379052.aspx
    SJS Web Server 7.0 should work with any driver that has support for javax.sql.DataSource. The great majority of drivers do.
    So instead of using the driver name, use the DataSource class name:
    com.microsoft.sqlserver.jdbc.SQLServerDataSource
    The properties to add should be:
    user=username
    password=password
    servername=sql_server_hostname
    portnumber=sql_server_port
    databasename=databasename
    In general, all the setters required to get the datasource configured can be set as properties.

  • Sun Java System Web Server 7.0 available

    I am delighted to announce that Sun Java System Web Server 7.0 is now available for download, purchase, deployment, and more.
    This release builds on the highly scalable and stable heritage of Web Server. It features an entirely re-designed Administration interface designed around clusters, easy access to frequently performed tasks, simplification of frequently performed tasks., and a fully scriptable command line interface featuring functional parity with the browser-based interface.
    In addition to the administration changes this release features:
    o Full 64-bit support for Solaris SPARC and Solaris AMD64 platforms
    o Regular expression pattern matching for URL re-writing and mass hosting
    o If/Then/Else constructs within request processing
    o Advanced sed based input and output filters
    o Dynamic loading of Certificate Revocation Lists (CRLs) without requiring daemon restart
    o Elliptic Curve Cryptography (ECC)
    o Built in request mapping for protection against abnormal load patterns and Denial of Service protection
    o WebDAV ACL support
    o Out-of-box Java support for Servlets 2.4, JSP 2.0, JSF 1.1, JSTL 1.1, JWSDP 2.0 based web services
    o Java session failover and recovery within a cluster of peers
    o Integrated HTTP reverse proxy User-Agent
    o Bundled FastCGI client for use with third party scripting environments such as Perl, PHP, Ruby on Rails, etc
    o Enhancement of perfdump, stats-xml, and SNMP as well as more ability to monitor the Java container and the ACL system
    o Much more
    The software can be downloaded from:
    http://www.sun.com/download/products.xml?id=45ad781d
    The documentation is available at:
    http://docs.sun.com/app/docs/coll/1308.3

    If 7.0 was released, how come http://www.sun.com/webserver still only talks about 6.1?

  • Sun Java System Portal Server 6.0 FAQs

    Sun Java System Portal Server 6.0 FAQs.
    Author: Sanjeev Agarwal
    Q. How to connect to external URLs from Sun ONE Portal Server? I want to use URL Scrapper for some of external sites/URLs.
    Ans:
    You can connect to external URLs if you have a Proxy Server running.
    If you are using Web Server addition of Sun ONE the Portal Server then
    go to /opt/SUNWam/servers/https-hostname.domainname/config/ dir
    In the jvm12.conf file, enter the followings:
    http.proxyHost=proxyservername.domainname
    http.proxyPort=80 (or the appropriate proxy server port number)
    https.proxyHost=proxyservername.domainname
    https.proxyPort=80 (or the appropriate proxy server port number)
    If you are using Sun ONE AppServer addition of Sun ONE Portal Server then
    go to /var/opt/SUNWappserver/domains/domain1/<server-instance>/config dir
    In the server.xml file, enter the followings:
    <jvm-options>-Dhttp.proxyHost=proxyservername.domainname </jvm-options>
    <jvm-options>-Dhttp.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
    <jvm-options>-Dhttps.proxyHost=proxyservername.domainname </jvm-options>
    <jvm-options>-Dhttps.proxyPort=80 (or the appropriate proxy server port number) </jvm-options>
    After this modification restart the server.
    Q. Explain all the processes (solaris 8 and S1 Portal Server 6.0) which runs when I start the Sun ONE Portal Server.
    Ans.
    These are the processes that a running Portal Server installation (Sun ONE WebServer addition, without SRAP) generally has by default.
    1. Directory server processes:
    - ns-slapd (LDAP server instance)
    - uxwdog (admin server process) (parent process)
    --- ns-httpd
    ----- ns-httpd
    2. Auth Helper processes:
    - doUnix
    3. Web-Server/Identity-Server/Portal-Server processes:
    As the Portal Server and Identity Server runs as web application on the Web Server, so they share the same JVM and processes.
    - uxwdog (web server admin server process) (parent process)
    --- ns-httpd
    ----- ns-httpd
    (for each web server instance)
    - uxwdog (parent process)
    - ns-httpd
    - ns-httpd
    or (in case of MaxProc=n )
    - uxwdog (parent process)
    --- ns-httpd
    ----- ns-httpd
    ----- ns-httpd
    ----- n
    Q. I have created a custom Provider but getting this error when I access the desktop, what do I do?
    > error in the desktop.debug file:
    > ERROR: DesktopServlet.handleException()
    > java.util.MissingResourceException: Can't find bundle for base name CustomTabContainerProvider,
    Ans:
    It needs a resource bundle for the custom provider. You need to create a file CustomTabContainerProvider.properties (as mentioned in the error message) and put it into the /etc/opt/desktop/classes directory. If you are not using any properties defined in this resource file then it can be a empty file. Have a look on the properties files that bundled containerProviders uses in dir <portal-install-dir>/SUNWps/web-apps/https-<host.domain>/portal/WEB-INF/classes.
    As you are extending JSPTabContainerProvider class, you can just copy the file JSPTabContainerProvider.properties from the above directory after renaming it to the <defined-provider-name>.properties (in your case CustomTabContainerProvider.properties) and move it into /etc/opt/desktop/classes directory.
    Q. what is actually multiple instances of Portal Server means?
    Ans:
    Multiple instance of Portal Server means, you will have more http listeners for the same desktop contents and the same identity profiles stored in a single Directory Server which all the instances share.
    In simple words you can have your Portal Server listening on different http ports, but uses same configuration, desktop and identities.
    It can help you to share the load for Portal Server http requests. The alternate methods are to create more web server virtual server processes (maxProc=n, but in this case the listening port will be 1 only) or use some hardware load balancer.
    You can achieve more from multiple instances if you have a multi level organization, you can change the look and feel of all the instances, images, services, components and can assign each instance to different organization or sub-organization.
    Q. How do I check the availability of the Sun ONE Portal Server/Identity Server services.
    Ans:
    You can check the availability of Sun ONE Identity Server services from following urls.
    http://<host.domainname>:<port>/amserver/sessionservice
    http://<host.domainname>:<port>/amserver/loggingservice
    To know the availability of components of Sun ONE Portal Server like Desktop/providers/Rewriter/Netmail you have to login into desktop. These are not services, but just the programming identities which will work if your Web Server and Identity Server is running.
    Just go to URL http://<server>:<port>/portal/dt , if it shows up that means your portal server is fine, and these entities will work for sure.
    Q. I am able to add the yahoo channels to existing users. But I am getting the weather for London not for local New Jersey. My language pref is to en|en_US and also the server is the default U.S server and not europe. How do I add the cities I want to see on weather channel?
    Ans:
    A Portal user himself (after login) can select what cities he want to see in weather channel.
    Steps:
    - click the edit button of weather channel
    - click on the area you belong to from Available Sections
    - select the cities from Available Cities select box and add them to Your Choices.
    - click finished from select city page and then again click finished from select area page.
    It will come back to the Portal Desktop and you will see all the cities you have selected in the weather channel.
    Q. How to use getContent() method to use in custom jsp providers (developed by ourselves) so that it can be used to retrieve a jsp page. I have already placed the JSP file in the directory structure /etc/opt/SUNWps/desktop/default/channel_dir. But still the jsp is not being displayed.
    Ans:
    You don't have to do anything in the custom JSPProvider's getContent method except the call { return super.getContent(request,response); } . If all you want is just to show your jsp, then create a channel from the default JSPProvider, and edit the property contentPage of that channel from samplecontent.jsp to your jsp name, save the changes and login again. You should see your JSP.
    Q. I want to remove all the buttons (help/edit etc.) from all the channels/one particular channel in my desktop?
    Ans:
    You can hide any buttons you want from any channel.
    These steps show how to hide all the buttons.
    1. Create a channel say "myNetlet" from netlet provider.
    2. Set the channel title to "myNetlet"
    3. Go to the dir /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider and edit the file providerCommands.jsp, and modify the last line :
    from :
    <%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%>
    to:
    <% if ( !(title.equals("myNetlet"))){ %><%=minMaximizeCommand%><%=helpCommand%><%=editCommand%><%=detachAtachCommand%><%=removeCommand%><% } %>
    4. Clean the dir mentioned below which contains compiled JSPs. /var/opt/SUNWps/https-<host>.<domain>/portal/tmp/_jsps/_etc/_opt/_SUNWps/_desktop/_default_en/_JSPTableContainerProvider/_html and reload the page.
    Relogin, and you would not see any buttons on "myNetlet" channel. You can customize this logic as per your needs.
    Q. How to change the title of SampleJSP Channel. I tried to change the channel properties title value via iplanet directory Server Access Management GUI. But it is not getting reflected.
    Ans:
    Through Admin console you can change the channel property "title", and as soon as you refresh the page (Shift reload) of relogin in the portal it get's reflected.
    The reason to this problem may be due to the channel property "title" is having "propagate" value as false and you are setting the channel title in the org level display profile not in the user level display profile.
    So better you change the channel name in user's display profile also.
    For this login into admin console and go to :
    - View: "User Management" -> click on organization -> Show: Users
    - click on the blue arrow of that user
    - click on Edit in section Desktop (this will open a window)
    - then change the channel properties same way you do for Organization display profile.
    Q. Login Problem with SunOne Portal 6.0.
    I was able to download and install sun one portal 6 on Solaris 8. The sample portal page came up after installation. However whenever I try to login to the Login channel with "amadmin" and the passphrase I used during installation, it takes me to another page - iPlanet/LDAP authentication page. Here I tried using the same login, but fails every time (the same login page appears). The url that shows is "http://<hostname>/amserver/login?module=dproadmin&goto=/amconsole/base/AMAdminFrame"
    I tried registering myself as a new user as well. This too fails.
    Ans:
    Make sure you are giving fully qualifying the hostname in the url which invoked the desktop. This in fact is documented in the administration documentation. If the hostname is not fully-qualified, the login page goes into an endless mode. Again, the correct url is "http://<fully-qualified-hostname>/portal". Once you get to the desktop, the login and the new user registration works.
    Q. How to send variables/parameters from 1 app to another app deployed on Sun ONE Portal Server? It may be the apps or different JSPs of JSP provider channel.
    How to achieve inter channel communication in Sun ONE Portal Server?
    Ans:
    You can use servlet context object or session, or may be the request object itself to store the information from one channel and use that in another channel. The use of either of these 3 approaches may depend on your requirements. Using session, the information will be available to that user's channels only, using request, the information will be available for that user and that request only and by using ServletContext you can share the information across users and sessions. You can obtain DesktopServlet's ServletContext object inside JSP/JSPProvider.
    Q. I am trying to modify the default desktop JSPs in TableContainerProvider and TabCotntainerProvider dirs, but it is not picking my modified JSPs ? what do I do?
    Ans:
    One easiest way to 100% ensure that it updates all your new jsp pages is to remove all the compiled jsps so that with next request the Sun ONE Portal Server compiles all the jsps and will make sure that your modification will be taken care of in next request.
    Go to /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ and remove everything. and access the Portal server, it will be little slow as it has to compile all the JSPs again. Here you will find directories in the name of Containers and Channels, so if you are modifying any particular Container/Channel you can just delete that only. This approach can help a lot during development time.
    Q. What is the location of compiled JSPs in Sun ONE portal Server and what servlet spec does it supports?
    Ans: The Portal server 6.0 runs on Sun ONE Web Server 6.0 sp2, which supports only jdk 1.3 and servlet spec 2.2 only. The Sun ONE Portal Server keeps the compiled jsps of desktop and channels in : /var/opt/SUNWps/https-<instance_name>/portal/tmp/_jsp/_etc/_opt/_SUNWps/_desktop/_default_<locale>/ dir as per the channels/container names.
    Servlet 2.3 is supported if you run the Portal Server edition that runs on Sun ONE Application Server 7.0.
    Q. How do I change jdk for Sun ONE Portal Server to another jdk? I want to change the JDK of only one of my Portal Server instances, is it possible? how?
    Ans:
    Yes you can achieve both.
    A. To change the JDK for all the server instances:
    Open <portal-install-dir>/SUNWam/servers/https-admserv/start-jvm file and modify the first line
    NSES_JDK=/usr/java_1.3.1_04; export NSES_JDK
    to
    NSES_JDK=<your-jdk-location> ; export NSES_JDK
    then open <portal-install-dir>/SUNWam/servers/https-<instance-name>/config/jvm12.conf file of all the server instances and add a line
    jvm.option=-server after the first line
    B. To change the JDK for a particular server instances:
    Make a another copy of the start-jvm file rename it and modify the jdk location in it as mentioned above.
    Open the start script from <portal-install-dir>/SUNWam/servers/https-<instance-name> dir and modify these lines :
    if test -r {SERVER_ROOT}/https-admserv/start-*
    then
    for STARTSCRIPT in {SERVER_ROOT}/https-admserv/start-*
    modify this to
    if test -r {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
    then
    for STARTSCRIPT in {SERVER_ROOT}/https-admserv/<changed_name_of_start-jvm-file>
    Note: As Portal Server 6.0 uses Web server 6.0 sp2, jdk 1.4 is not supported.
    Q. How do I create a custom login page or a link, which will just log me into the portal server.
    Ans:
    You can create a custom page in your jsp page, just add this portion of html into your web page :
    <FORM action="http://<server>:<port>/amserver/login?module=<login-module>&page=1" method=post name=login_form2 target=_top>
    Login page using <login-module><br>
    <P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
    <P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
    <P><INPUT name=Submit type=submit value=Submit> </P>
    </FORM>
    The <login-module> can be LDAP or Unix or Membership which ever you have enabled. Or instead of this you can create a link. For example for LDAP auth module :
    "<a href="http://<server>:<port>/amserver/login?module=LDAP&page=1&TOKEN0=user&TOKEN1=password" target=_top> Login into Portal </a>"
    where user and password are the user credential for the portal server.
    Q. Can I install a portal server pointing to another Identity server? I want to install few postal servers (on different machines) pointing to same identity server, is it possible?
    Ans:
    No, right now the Sun ONE Portal Server is tightly integrated with Sun ONE Identity Server so you can't just install only Sun ONE Portal Server and point it to another Sun ONE Identity Server. You can have a common Directory server if you want.
    Q. I have an application which takes input in from anonymous user and then to complete the request the user than has to login. I am having problem in passing the taken input from anonymous page to logged in user. all the request parameters are lost when I log in. How do i get the request parameters after I log in
    Ans:
    You can create a custom login page and submit the form to "/amserver/login" with a hidden parameter "goto" through which you basically specify which url to go after you log in. So you can use this mechanism to create a query string with all your request parameters you want to pass after login. For example:
    You can create a jsp which take few inputs from user and to complete the request you have to login so it posts the input form to a login jsp and stores the parameters taken from user in a hidden field (goto) :
    <FORM action="/amserver/login?module=LDAP&page=1" method=post name=login_form2 target=_top>
    Login page using LDAP<br>
    <P>Enter UserId<BR><INPUT name=TOKEN0 size=22></P>
    <P>Enter Password<BR><INPUT name=TOKEN1 size=22 type=password></P>
    <INPUT TYPE=HIDDEN NAME="goto" VALUE="/portal/dt?param1=<%=request.getParameter("param1")%>&param2=<%=request.getParameter("param2")%>">
    <P><INPUT name=Submit type=submit value=Submit> </P>
    </FORM>
    After you login through this page both the param1 and param 2 will be available in the request object after you login and you can retrieve them in your application or jsp.
    Q. I have few System.out.println in my jsp which i am using in my JSP provider channel, but when I look at the portal server's /var/opt/SUNWam/debug/desktop.debug file, none are there. I looked at the web server's access and error logs too, but it is not there also. Can somebody tell me how do it get those ? Do we have any other mechanism to put debug logs ?
    Ans
    By default the binary which web server runs is uxwdog which eats up System.out.println output. If you want to see the System.out.println then you need to change the product binary from the start script of the portal server instance.
    - Go to <portal-install-dir>/SUNWam/servers/https-<instance-name> and open the start script
    - Change the PRODUCT_BIN=uxwdog to PRODUCT_BIN=ns-httpd , save the file
    - Run the script ./start to start the portal server
    Note : with ns-httpd ON the server will not leave that shell, and in the same window/shell you will be able to see all your System.out.println statements. To close the server you have to kill the server process with "kill -9 pids" command
    Alternate way is to use api inside your application or jsp:
    <%@page import="com.sun.portal.providers.jsp.JSPProvider, com.sun.portal.providers.*, com.sun.portal.providers.containers.*, com.sun.portal.providers.context.*" %>
    <% JSPProvider p=(JSPProvider)pageContext.getAttribute("JSPProvider");
    ProviderContext pc = p.getProviderContext(); %>
    <%-- after that you can use these lines any where in your jsp --%>
    <%
    pc.debugError("your error msg");
    pc.debugMessage("your msg");
    pc.debugWarning("your warning msg");
    %>
    The particular mgs will be shwon in /var/opt/SUNWam/debug/desktop.debug file as per your "debugLevel" parameter setting in /etc/opt/SUNWps/desktop/desktopconfig.properties file. By default the debugLevel is set to error so only pc.debugError("error msg") will be shown.
    Q. Multipart form (file upload) processing in providers? Is it supported
    Ans:
    The Sun ONE Portal Server's DesktopServlet does not have the ability to process a request with the content encoding type of multipart/form-data. DesktopServlet does not pass the input stream for the request on to the Provider.
    To accomplish handling of multipart/form-data type requests, it is necessary to create a companion servlet or JSP that process the multipart/form-data. This servlet can then pass control back to the Portal channel. The data from the file can be shared between the servlet and the provider by using static Java members or by storing the data in a back-end database and then passing a reference to the data over to the provider.
    Q. After installing the Portal Server I am trying to login as admin, but it is failing and coming back to login page every time. How do I login?
    Ans:
    The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Try login using these credentials.
    Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
    Q. I installed Sun ONE Portal Server 6.0 some time back, and now I want to know all the installation parameters and user/passwords for whole portal installation. How do I do that?
    Ans:
    The Default Admin user is 'amadmin' and the password is the PASSPHRASE you give during Portal Server installation. Also in the browser give the complete URL for the Portal Server like : Http://<myhost>.<mydomain>:<port>/amserver/login or Http://<myhost>.<mydomain>:<port>/amconsole. You can't login into portal server's IDSAME console by giving IP Address or just the hostname, also your machine should be listed in the DNS server so that it can resolve the name.
    In case you have forgotten the port numbers and PASSPHRASE that you give during installation, you still can see all the information for each component of your Portal Server Installation. The Portal server and it's components like Directory Server, Web Server and IDSAME are installed as Solaris package so the system has all the information for these packages.
    Portal Server : See file /var/sadm/pkg/SUNWps/pkginfo
    Directory Server : See files /var/sadm/pkg/SUNWamds/pkginfo and /var/sadm/pkg/SUNWamdsc/pkginfo
    Web Server : See file /var/sadm/pkg/SUNWamws/pkginfo
    Identity Server : See file /var/sadm/pkg/SUNWamsam/pkginfo
    Note: In any case you should never edit/modify these files.
    Q. Controlling the display of the help (?) button.
    Where are the links/image elements defined for the help/edit/minimize buttons? the leafWrapper.jsp pulls the hashtable out of the HttpRequest, and that hashtable is being used by providerCommands.jsp:
    Hashtable commands = (Hashtable)request.getAttribute("provider_cmds");
    Any idea where this is being set?
    Ans:
    - You can remove the help/edit button of any channel by adding the line into the Channel's properties by editing the Xml of display profile in the admin console.
    <String name="helpURL" value="" advanced="false" merge="replace" lock="false" propagate="true"/>
    <Boolean name="isEditable" value="false" advanced="false" merge="replace" lock="false" propagate="true"/>
    The Attribute 'provider_cmds' is set into /etc/opt/SUNWps/desktop/default/JSPTableContainerProvider/tablecolumn.jsp :
    <dttable:getProviderCommand id="provider_cmds" scope="request" />, and after that only the leafwrapper.jsp is included, but the Hashtable is generated by a class com.sun.portal.providers.util.ProviderCommands.java and made available through taglib classes. So you can't change the generated contents/string in the Hashtable.
    But you can change the default 'alt' text displayed and the images linked to the help/edit icons. As this modification is at Provider level, it will change the icons for all the channels in the desktop.
    Please see the file:
    /opt/SUNWps/web-apps/https-<host>.<domain>/portal/WEB-INF/classes/JSPTABLEContainerProvider.properties.
    Here you will find the mapping. The image location are given from the context root of portal server which is by default : /opt/SUNWps/web-apps/https-<host>.<domain>/portal.
    Q. I have a number of web applications needed to integrate to portal server. Any pointers or tips of what my option is?
    Ans:
    You can very well integrate all your web application with Portal server. Portal Server 6.0 has web container same as Sun ONE web server 6.0 Sp2, which runs on Jdk-1.3.
    If your web applications are just Servlets/Jsps then you can very well port them on Portal server's webserver which supports war module deployment. (infect for Web server the Portal server and Identity server is like a war module.)
    There can be two possibilities in this case, either you put the whole of your application on portal server and make the link available into the desktop via 'Application Provider Channels' or you can create a client to your web application into portal server.
    If your web application is on Sun ONE Application server 7.0 and needs authentication, you can also have SSO. If you just want to show the link of your web application into desktop then you can either use URL Scrapper to show the first page of your web application or use Bookmark channel to provide just the url.
    The easiest way to make a client of your web application is to use JSP Channel using JSPProvider and put your logic into the samplecontents.jsp file or you can create your own custom Provider extending JSPProvider. There can be a lot of different configurations, depending on the web application you want to integrate and your needs
    Q. I removed few channels from the org level display profile but still they are coming to the desktop of users, I had accessed the desktop before. why?
    Ans:
    If you still see any channel after you remove it from the display profile at organization lever, that means you have to edit the user's display profile. So go to admin console and select User from Show: menu and click on the blue arrow near the user. In the right frame under the 'Desktop' category click on the Edit link (right side). This will open user's display profile in a window. Now edit it as per your requirements.

    Unfortunately Web Server 6.0SP2 is no longer available for download.
    If you must use Web Server 6.0, you should use the most current Service Pack. It is backward compatible and contains many performance and security fixes.

  • Sun Java System Application Server  into Netbean 6.1

    Hi , I am new to Java community,
    I like to lean J2EE so I downloaded
    jdk-1_5_0_16-windows-i586-p and installed
    then I installed
    java-tools-bundle-update5-windows
    I am trying to do the initial setup and do the sample
    The Java EE 5 Tutorial
    See this tutorial for information on building and deploying Java EE 5 applications.
    When I try to register the Sun Java System Application Server into Netbean 6.1
    I could not I have warning, says
    Provide a valid server installation location
    But I gave, C:\Sun\AppServer
    If you guys can give any light on this appreciated

    It doesn't sound like you have installed a Java EE (formerly J2EE) application server. Your download of "jdk-1_5_0_16-windows-i586-p" is Java Standard Edition, which you need, but you also need an implementation of Java Enterprise Edition. The [Sun Java System Application Server|http://developers.sun.com/appserver/] is certainly a valid Java EE implementation, but I don't see in your steps where you downloaded that. There are several types of NetBeans downloads ("bundles") you can perform and I believe that one or more bundles (such as "All" and "Web & Java EE") includes GlassFish as part of the download. I recommend using the GlassFish Java EE implementation that comes with NetBeans 6.1 for learning how to use Java EE with NetBeans. Alternatively, you can download GlassFish separately at [https://glassfish.dev.java.net/|https://glassfish.dev.java.net/].

  • Sun Java System Connector for Microsoft Outlook 7.3 Update 1

    Good Day,
    Could somebody please advise me where I can download:
    Sun Java System Connector for Microsoft Outlook 7.3 Update 1
    Thanks,
    Gilbert

    Gilbert_Gerber wrote:
    I thought it is suppose to be part of Sun Java Communications Suite 6 update1?You can download it from the following location:
    http://wikis.sun.com/display/CommSuite6U1/Get+the+Software
    Select the Download Link => Platform: Windows
    Regards,
    Shane.

  • Integrating WebSphere Portal Server with Sun Java System Access Manager

    Hi All,
    Is it possible to Integrate WebSphere Portal Server with Sun java System Access Manager?. If so plz send me any doc or web site link for the same.
    Thanks in Advance
    Rgds,
    Lessly J

    Rushi-Reliance wrote:
    Kindly let us know how to proceed further as we are waiiting some reply from your team.As I already advised in your previous posting (http://forums.sun.com/thread.jspa?threadID=5359095), you are best off re-installing solaris from scratch and installing Communication Suite 6 update 1 if you cannot get Access Manager 7.1 configured.
    Regards
    Shane.

  • MSSQL server as data store for SUN Java system Identity server 6.1

    Hi,
    I am a new user to SUN java system Identity server 6.1. Can we use RDBMS such as MSSQL server as a datastore for IS?
    if so, what is the configuration that needs to be done on IS 6.1?
    Thanks in advance,
    Srinivaas.

    Hello All,
    Waiting for any idea for the long time. I am trying again and again by restoring my directory server zone. I have two whole root zones one i am using for sun portal and communication suite 5 and other is for directory server. They are working fine. but when i try to install the Sun Java System Identity Synchronization for Windows 6.0 on directory server zone. Some time it hangs at 97% while installing core and some time it giving error the installer cannot upload some entries in the template this error comes when i restore my directory server zone.
    Can some please give me idea why it giving these error on solaris zone.
    Thanks in Advance,
    Sikander

  • Sun Java System Messaging Server doesn't support some ISO 8859 charsets

    Hello,
    I couldn't find any link to report bugs on the Sun Java System Messaging Server, so i guess i'll report it here:
    Sun Java System Messaging Server currently doesn't support the ISO 8859-13 charset, which is the standard charset in the Baltic states. When a person recieves an email in that charset, every non-ASCII character in the message becomes absolutely unreadable when displayed in this webmail application.
    This has been tested with this version of the product:
    X-Mailer: Sun Java(tm) System Messenger Express 6.1 HotFix 0.01 (built Jun 24 2004)
    Furthermore, you can test the case by yourself using this link: http://www.lietuvybe.org/testas/. You can enter your e-mail address there to get a few sample messages in Baltic and Cyrillic charsets. You will see that the Sun Java System Messaging Server passes all those tests except this particular one. So, it's a very nice product. :)
    It would be very very very cool if Sun would fix this small, but very important issue.
    regards,
    Rimas Kudelis

    Hey! :)
    I am feeling some bad vibes, here.Hey, sorry, I didn't want you to think it's personal. I didn't really mean to hurt you or whatever. You are trying to help and I do appreciate that. I really do.
    The reason i'm a bit sad is about the policy of others:
    First, i am not a provider of that webmail service i'm talking about. A big Lithuanian company is. Personally, I rarely use webmail apps at all, and even when i do, i use an app i internationalized myself. :). Meanwhile, i install Horde IMP as a webmail application for my small servers, and i'm satisfied with it.
    The problem i described is literally not my problem. It's a problem of that big Lithuanian company mentioned above (and the users of its webmail system). I suppose this company does have that account already and, furthermore, they are the ones who should post to this forum or file a support request., and they are the ones who should be worried about that bug. However, reality differs. In reality, big companies in Lithuania don't care about correctness of their webmail apps too much. However, there are a few maniacs like me who do. We test their webmail apps, we contact them and describe them their problems and ask them to fix those problems. Sometimes, they do that, but in most cases we either don't get a reply at all, or we get something like "we'll take a look at it later". For example, lately, we had an issue with one of the most popular webmail providers in Lithuania skipping a MIME-version header. Fixing this issue is just a single line of code. However, we had to push them annoyingly for kinda few months until they finally fixed it.
    That was the first aspect.
    The second is that i don't really like to create hundreds of accounts for myself just to ocasionally report bugs like this one. If only Sun would let me to simply file a bug, and forget that, i would gladly do it. But no, i have to find a deeply hiden support page, then fill a form, create myself an account and a password, then log on, then fill some misterious support request... Do I have to do that for a company that won't even consider thanking me? I think that's too much. Furthermore, every party on the net enforces it's own username and password restrictions. That sucks too. I wish i could just log on as "rq" everywhere like this forum, using the same password i could easily remember. However, i have to use "rq", "er-ku" or "erku" or "rq@something" as my username on different platforms, and sometimes even my (long enough) password is not accepted. It's hard to track such accounts, and in most cases like this one, i don't really want to have an account at all, as i'm just passing by.
    To summarize the post: I'm NOT a licenced user, and all I wanted was to file a bug, which affects licenced users and ordinary people.
    How do i remove my account from this forum now? :)

  • Sun Java System Messaging Server

    Hi all,
    I am new to Sun Java System Messaging Server. In fact right now I don't even know how to install it. Which is why I'm here. I need to know if this server can run on windows xp OS. The other option that I have is Ubuntu Linux 64bit, though I am not so fluent with that operating system.
    http://wikis.sun.com/display/CommSuite/Communications+Suite+6+Installation+Guide
    I visited the link above and under the operating system requirements the OS I have is not listed. But can Someone please confirm my suspicion that this server cannot run on winXP or Linux.
    Thank you,
    Eusha

    adeelarifbhatti wrote:
    What does this mean?
    We can use the public and private key i.e. digital signature via web interface as well?Refer here:
    http://wikis.sun.com/display/CommSuite/Administering+SMIME+in+Convergence
    Regards,
    Shane.

Maybe you are looking for

  • When I try to open iTunes, it asks me if I want to report my error..?

    I dont understand. I erased iTunes and Quicktime from my copmputer and then added it again..that didn't work. Then, I re-installed my CD that came with my iPod..and THAT didn't work. And then today, I opened my control panel and I opened my Quicktime

  • Journal Line can not drill down (Solved)

    When I check one journal and want to dirlldown, the system said this function isn't available for my responsibility. Can someone help me on this and tell me where to assign the drilldown function to a responsibility? Edited by: Jerome.Yin on May 5, 2

  • Load in a image to a class

    Hi. Im a newbie on java and want some help, im trying to load in a image(gif) from my hardrive into a class, and draw it on the screen. I know how to do it with swing, but just want to do it with awt. And i dont want too use applet, is this possible?

  • Installing multiple copies of the SAME service on a BOX

    This is a "Best Practice" question for BOE-XI (3.x). I have dug through the 3.1 DEPLOYMENT training, Admin and Pattern documents, but none of them clearly discuss anything around installing multiple copies of the SAME service (eg. CMS, ReportJob) on

  • Printing 2010 redesigned T4A form

    When printing the 2010 redesigned T4A form the cummulation WT text is also displayed/leads before the amount and print right over top of the boxes thus making the amount not to be aligned on the amount box. This is in the other information area of th