Sun Java Web Proxy v3.6 SP8 supported?

Hi,
I'm trying to find out if the Sun Java Web Proxy v3.6 SP8 is supported by Sun. I haven't been able to find any supported software listing on Sun's websites.
We have a software support contract with Sun.
Any help would be appreciated.

Is there anywhere on the Sun site that documents this?

Similar Messages

  • Sun Java Web Proxy Server 4.0.12 is supports Websense Web Security

    Hello All,
    I am using Sun Java Web Proxy 4.0.12 server and installed in RedHat Linux 5.0 OS and I can found software for Websense Web Security aoftware to protect my users and filter the traffic.
    How can I integrate with Websense Web Security
    Thanks & looking forward hear from you guys
    Ifthekhar Javed
    Riyadh.

    We have migrated several reverse and acl proxy from 3.6 to 4.0.6 and have hit a few issues. If anyone has encountered these we would appriate input.
    First, we thought we had caching disabled in the GUI but the server.xml still have it set to "true" in the FILECAHE entry. Will changing the entry to "false" totally disable chaching?
    When we started the migrated proxy instances the server hit memory issues with swap being eaten up very quickly.
    Second issue is MaxProcs in the magnus.conf. In 3.6 MaxProcs set the number of processes to start and it now for determening the number of processors in the server for threading. We are currently on a server with 6 processors. Should MaxProcs be set to six?
    We will be migrating to Solaris 10 and then to a T2000 so we assume the setting will have to change for each of those migigrations.
    The third issue is, has anyone run 3.6 on Solaris 10 and then migrated to 4.0 later? Sun site shows 3.6 not tested on Solaris 10 but I am sure some one has tried it.

  • Sun Java Web Proxy Server Routing to another Proxy Server

    hello every body
    i have installed Sun java web proxy server and we are get internet services from anotyher proxy server.
    how route SOCKS (Ports) to another proxy server)
    I mean 8080 web browsing is ok but my socks applicaiton like outlook is not working. how to Route my Sun Java Web proxy Server Socks Server to another Proxy Server.
    Please reply
    best regards
    Aamir Mughal
    [email protected]

    Dear ahmad@bzu,
    I suspect that your download is corrupted. Check the file size ( for me it shows up 89,328KB(and the installation went smooth). So a possible solution should be to download again and try the installation.

  • Issue with Sun Java Web Proxy Server

    I am using Sun Java Web Proxy Server to test my webservice in https mode.(SSL mode).When i test the webservice in http mode,its working fine,but when I test it in SSL mode ,it is giving the following error:
    Unable to tunnel through localhost:8082. Proxy returns "HTTP/1.1 403 Proxy denies fulfilling the request"
    When I am requesting the webservice using the following parameters:
    a)-Dcom.yodlee.soap.services.url=https://localhost:1080/yodsoap/services
    b)-Dyodlee.sdk.https.proxyHost=localhost
    c)-Dyodlee.sdk.https.proxyPort=8082
    d)-Dcom.yodlee.soap.client.http11Enabled=1
    this parameters is used to set the client http connection to HTTP1.1 by setting the HTTP_TRANSPORT_VERSION.
    Detailed error message is as follows:
    Caused by: java.io.IOException: Unable to tunnel through localhost:8082. Proxy returns "HTTP/1.1 403 Proxy denies fulfilling the request"
         at org.apache.axis.AxisFault.makeFault(AxisFault.java:129)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:131)
         at org.apache.axis.strategies.InvocationStrategy.visit(InvocationStrategy.java:71)
         at org.apache.axis.SimpleChain.doVisiting(SimpleChain.java:150)
         at org.apache.axis.SimpleChain.invoke(SimpleChain.java:120)
         at org.apache.axis.client.AxisClient.invoke(AxisClient.java:180)
         at org.apache.axis.client.Call.invokeEngine(Call.java:2492)
         at org.apache.axis.client.Call.invoke(Call.java:2481)
         at org.apache.axis.client.Call.invoke(Call.java:2176)
         at org.apache.axis.client.Call.invoke(Call.java:2099)
         at org.apache.axis.client.Call.invoke(Call.java:1622)
         at com.yodlee.soap.core.login.CobrandLoginSoapBindingStub.loginCobrand(CobrandLoginSoapBindingStub.java:225)
         at com.yodlee.soap.core.login.CobrandLoginSoapClientProxy.loginCobrand(CobrandLoginSoapClientProxy.java:119)
         ... 1 more
    Caused by: java.io.IOException: Unable to tunnel through localhost:8082. Proxy returns "HTTP/1.1 403 Proxy denies fulfilling the request"
         at org.apache.axis.components.net.JSSESocketFactory.create(JSSESocketFactory.java:197)
         at org.apache.axis.transport.http.HTTPSender.getSocket(HTTPSender.java:157)
         at org.apache.axis.transport.http.HTTPSender.invoke(HTTPSender.java:114)
         ... 12 more
    This error message shows that its not able to get the socket connection to the server.Can anyone tell me the reason of it.
    If you need any more info do let me know.
    Regards,
    Somendra

    First of all, is there a reason why you are using jRockit?
    Since the issue appeared after upgrading the windows, the issue would potentially be in the interaction between JVM and OS.
    Also, there were some issues related to memory leak that were fixed in AS 8.2.
    May be you should try with a Sun JVM and AS 8.2.

  • Why doesn't Sun ONE Web Proxy Server support full replication?

    Sun believes caching on-demand is a much more appropriate model for either the World Wide Web or an intranet. Common indexes should be distributed, but data can (and should) be stored wherever is most appropriate on the network. If Proxy Servers are deployed, there will be a 50 percent to 75 percent chance that the document will be cached locally and no chance of getting stale data.
    Sun ONE Web Proxy Server uses sophisticated statistical analysis to store the documents most likely to be needed. It also manages document expiry and version control, and by default checks the home server every time a document is requested. Full replication like that performed by other softwares presumes that each document needs to be fully replicated on every server. (Imagine doing that on the Web!) This model limits the scalability of the infrastructure, and requires many more servers, more hardware, and more management complexity. More importantly, it increases the likelihood of getting stale data. A document checked in at one location may take a day or more to be fully replicated around the world.

    If you have a support contract, get in touch with a support engineer. We've run into a bug related to following referrals in the "off-the-shelf" version of the proxy server. I believe there is a hotfix that solves the issue.

  • Does Sun ONE Web Proxy Server have built-in log analysis tools? What kind o

    Sun ONE Web Proxy Server automatically logs all requests using either the common log-file format or an extended log-file format. The extended log-file format includes the referrer field and user agent. You can also create your own log file format by selecting which HTTP fields you would like to log. A built-in log analysis program includes reports such as total number of requests, total bytes transfered, most commmon URLs requested, most common IP addresses making requests, performance during peak periods, cache hit rates, and estimated response time reduction. The items logged and the analysis program are completely configurable using the server manager's HTML form.

    Sun Java System Web Server is a web server; it serves web pages to web clients. Sun Java System Web Proxy Server, on the other hand, is a web proxy server; it routes requests/responses between web servers and web clients.
    You can configure Web Server to act as a simple reverse proxy by installing the Web Server 6.1 Reverse Proxy Plugin. This doesn't provide any of the forward proxy or caching proxy functionality found in Web Proxy Server.
    Both Web Server 6.1 and Web Proxy Server 4.0 are supported on Solaris 10.

  • Php with xsl on Sun Java Web Server 7.0

    Hi anyone,
    i installed php as nsapi via phppack. Now i need xsl support in php. I've tryed to compile php with the following line (php 5.2.6):
    ./configure with-nsapi=/export/netscape_71 enable-force-cgi-redirect with-gettext with-zlib --with-xsl=/usr/lib64/php5/extensions
    magnus.conf, obj.conf and mime.types are assimilate to this article:
    http://developers.sun.com/webtier/reference/techart/php2.html
    After compiling, i copy the libphp5.so in the .plugins/php/ dir an restart the webserver.
    He stops with this message:
    failure: CORE2253: Error running Init function load-modules: dlopen of /export/netscape_71/plugins/php/libphp5.so failed (/export/netscape_71/plugins/php/libphp5.so: wrong ELF class: ELFCLASS64)
    failure: server initialization failed
    What's going wrong?
    How i get xsl Support on Sun Java Web Server?
    thanks!

    essential wrote:
    ./configure with-nsapi=/export/netscape_71 enable-force-cgi-redirect with-gettext with-zlib --with-xsl=/usr/lib64/php5/extensionsYou are pointing to 64-bit library path. Change it to 32-bit library path.
    failure: CORE2253: Error running Init function load-modules: dlopen of /export/netscape_71/plugins/php/libphp5.so failed (/export/netscape_71/plugins/php/libphp5.so: wrong ELF class: ELFCLASS64)
    failure: server initialization failedThis means that it expects a 32-bit library but it found a 64-bit one.

  • Is Sun Java Web Server 6.1 compatible with RedHat 5.5

    Hi,
    Sun Java web Server 6.1 installed on Red Hat 5.1 and Opertaing System is going to be upgraded to Red Hat 5.5. Can any one tell me whether Sun Java Web Server 6.1 is compatible with Red Hat Linux 5.5

    If you want the internal server to service requests for /admin, you should teach the internal server to service requests for /admin.
    It is possible -- but complicated -- to configure Web Server 6.1 to rewrite request URIs before proxying requests to the internal server. However, unless you rewrite all the HTML generated by the internal server, the results probably won't be what you want. Consider, for example, what happens if the internal server's HTML references /foo.gif. Does that mean the web browser should ask for /admin/foo.gif or /foo.gif?
    Rewriting request URIs is much simpler in Web Server 7.0, but it's still probably not the right tool.

  • Sun Java Web Server7 admin site doesnt start!!!

    Hi,
    i have installed Sun Java Web Server7 3 months ago.
    yesterday i was trying to look at the site configuration and wanted to start the server-admin interface.
    for some reason when i am running the command admin-server/bin/startserv the command end and return to the shell without any output.
    i have looked at the error and access logs after defining the error log level to finest and no output there also.
    i run netstat and looked at the process and there isnt any service listening on the management port.
    can someone please give me direction on debuging this problem.
    thanks in advanced
    Edited by: mongaron on Mar 19, 2008 10:52 AM

    Hi
    What is the version of WebServer you are using. I see admin-server as a service, i guess your version is Web Server 7.0u2 which has SMF support.
    During the installation if you have enabled SMF Solaris 10 OS creates SMF service for each instance of Web Server.
    Use the stopserv script and try to stop the admin-server and Web Server instances.
    Now run the following command svcs | grep admin-server and svcs | grep https. This should not show any services running.
    Now start the admin-server using $(Install_dir)/admin-server/bin/startserv and instance using ${install_dir}/<instance-directory>/bin/startserv
    Now run the following command svcs | grep admin-server. This should show the following output
    online 12:29:07 svc:/network/http:admin-server
    online 12:29:07 svc:/network/http:<instance-name>
    As you had mentioned in the previous replies it shows online*, which means currently the service in the starting state. Once the service started it will become online.
    If there is any problem starting the service, running the command svcs -xv will give the error output why the service went to maintenance. Please try the above and let me know what output you get for the above commands.

  • Can i setup a secure reverse proxy using sun one web proxy server and windows 2000?

    I've tried this on IPlanet Proxy 3.6 and, after reading the documentation, realized that SSL is not supported on the Windows platform. So I'm asking if it is supported using Sun One Web Proxy Server

    Hi,
    Yes, What you say is right.
    "The NT and Windows 2000 versions of iPlanet Web Proxy Server 3.6 do not support SSL".
    Sun One Web Proxy Server is as same as iPlanet webproxy server.
    May be in future relase of proxy server SSL will be supported in Win2000.
    Regards,
    Dakshin.
    Developer Technical Support
    Sun Microsystems
    http://www.sun.com/developers/support.

  • Sun Java Web Server 7 and JNDI Jell

    Hi all,
    I am building a normal Java EE web app (WAR file), and I was originally developing on GlassFish v2.1 and everything was beautiful. Now, I found out our shared server is Sun Java Web Server 7, but the sys admin said everything should run fine as long as I wasn't using JSB's.
    I downloaded and installed SJWS7 on my local machine so I could test my application against it, and JPA and SJWS7 are not getting along.
    I am trying to bind my persistence.xml to the data source I created on SJWS7.
    SJWS7 JDBC Resource: jdbc/pact
    persistence.xml:
        <persistence-unit name="pact" transaction-type="RESOURCE_LOCAL">
            <description>PA/Circuit Tracking Development</description>
            <provider>org.hibernate.ejb.HibernatePersistence</provider>
            <non-jta-data-source>java:comp/env/jdbc/pact</non-jta-data-source>
            <properties>
            ....There is nothing in sun-web.xml or web.xml that references this resource (although I tried that too, and no go).
    The traceback I get is:
    <code>Caused by: javax.naming.NameNotFoundException: PWC4216: Name pact is not bound in this Context
         at org.apache.naming.NamingContext.lookup(NamingContext.java:778)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:148)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:789)
         at org.apache.naming.NamingContext.lookup(NamingContext.java:161)
         at org.apache.naming.SelectorContext.lookup(SelectorContext.java:147)
         at javax.naming.InitialContext.lookup(InitialContext.java:351)
         at org.hibernate.connection.DatasourceConnectionProvider.configure(DatasourceConnectionProvider.java:52)
         ... 151 moreI've been trying for almost an entire day now, and googling isn't revealing anything helpful. I don't know what I'm doing wrong. Can anyone point me in the right direction?

    u should be using
    - default installation ( you can also use silent installation for this)
    admin-server/bin/startserv
    wadm delete-instance --user admin
    wadm delete-config --user admin                                                                                                                                                                                                                                                                                                                                                                               

  • How would a corporation deploy Sun ONE Web Proxy Server?

    A corporation should deploy Sun ONE Web Proxy Server at the following key places:
    * The Internet gateway: Sun ONE Web Proxy Server deployed just behind the firewall facilitates access to the Internet and reduces response times and communications expense.
    * Major sub-network connections: Marketing, Sales, Product Development, Human Resources, and Finance departments might have their own subnetworks. An Sun ONE Web Proxy Server deployed at each subnet can reduce traffic on the corporate backbone.
    * Remote offices that are disconnected from the internal network: Sun ONE Web Proxy Server can provide a quick mechanism for replicating content when necessary, providing better company integration and increasing network performance without large capital and communications expense.
    * Internationally: Outside the United States, communications bandwidth is typically much more expensive, making Sun ONE Web Proxy Servers even more cost effective. Every international office can make use of an Sun ONE Web Proxy Server.
    * Outside the firewall as a Web server substitute in reverse proxy configuration: This protects information on the secure Web server behind the firewall and offers load balancing via caching.

    http://wwws.sun.com/software/download/products/3ef1fcb5.html
    If u wait for a week or so, SP4 will also be there.
    Maneesh

  • IPlanet Sun ONE Web Proxy Server 3.6 SP6 terminating

    I have a problem with my proxy server server.
    I use iPlanet Sun ONE Web Proxy Server 3.6 SP6
    It is terminating and the service is restarting. This happens about 10-15 times a day. The message I get from the log is :
    [22/Mar/2005:09:29:30] info: server terminating... each time it terminates.
    I know for sure that this is no hardware issue (as I have changed the hard disk recently). My OS is win2000 server SP4 + all released patches from MS.
    Also I have reinstalled the OS several times (clean install after format) and I got the same result.
    Also I tried to use the proxy with/without LDAP server for authentication - the same.
    Any suggestions/recommendations are mostly welcome.
    Thanks in advance,
    Kaloyan

    Dear Kaloyan,
    Migration to another proxy (e.g. ISA) seems to be quickest solution for your problem, as WebProxy doesn't work well on w2k platform.
    Vladimir
    P.S. Regards to Delyan :)

  • Deploy .war or .ear file to sun java web server 7.0 update 4

    Hi
    This could be a very daft question, but still I would like to get a clarification.
    My clients are a financial organisation, and for security and various other reasons they accept only .ear files. But this time the development and deployment would be done on Sun Java Web Server 7.0 update 4 . Now since its a web server I don't think I can deploy an .ear file.
    But sure I would like to get an answer from the experts here, is it possible to deploy and .ear file to Sun Java Web Server 7.0 before I can go back to my clients.
    Please help me here as I'm in a real big confusion here. Your help would be highly valuable to me.
    Thanks
    Jagdish

    Hi
    Thanks for the reply and I appreciate your help. Well I tried deploying an .ear file directly and web server 7 complains that it doesn't have a .war extension, understandably so.
    And then ripping apart the .ear file and deploying the .war file does work, as is expected of a web server.
    Well, about my customer is a bank and they have a very tight security policy, and why they need an .ear file is beyond my understanding. Well as far as this issue is concerned, I need a strong point so that I can get back to them that we need to comply to the third party software.
    But I didn't wan't to get back to them saying we can only provide a .war file and then later find out an .ear file could have done the job. And being seen as the technical experts we can't afford to make any mistake.
    Thanks
    Jagdish

  • Install certifcate on sun java web server 7.0

    we just moved away from IIS and servlet exec because of issues we are having with the speed. sun java web server was like 4 times faster. we had the web app up and running, but for some reason we couldnt figure out how to install a certificate. i went through the request wizard and got the code and sent it to digicert and got my code for the certificate. i then installed it by pasting it, after i finish i get this error (unknown option 'by'). can someone point me in the right direction.
    my only guess so far was i am using *.domain.com in the domain field, when you request the certificate.

    I can't see anything wrong with the steps you followed to install the certificate. Are you using Web Server 7.0 or Web Server 7.0 update 1? As far as I remember, in Web Server 7.0, wildcard characters like * were not allowed in the "Server Name(cn)" field of request certificate wizard. This got fixed in 7.0 update1 release.
    Can you post you server logs so that we can figure out what is wrong? You can as well try certutil command as been suggested by mv and let us know if you could manage to install the certificate.

Maybe you are looking for