Sun Linux 5.0.9

Can some one give me some information as to what this Sun Linux 5.0.9 OS is? Is it the same as Red Hat AS 3 except its called Sun Linux for Sun or is it totally different?
Thanks

Appears to be based on the EARLIER Linux 2.2
kernel that was used on the Sun Cobalt machines around 2000-2001, or so.
Don`t know for sure - but - it was probably a version based on the Red Hat version at that time. There will surely be someone more knowlegable out there that may probably shed some light on this subject.
..................... John.

Similar Messages

R1213 Load Balance using F5 load balancers on Sun/Linux

Hi,
We got below requirement to perform upgrade and applications Load Balance
1. Web and Courion services using F5 Load Balancers after R1213 Upgrade.
Any Idea bout Courion services and how we can perform Load Balance for its services on Apps R1213
The load balancers would be configured for sticky sessions for consistency.
2. How we can achive Load Balanced applications to SSL off-loading method.
3. What is the best methods and any whitepapers to achive the same.
Please let me know.
Thanks,
Bhargava

Any Idea bout Courion services and how we can perform Load Balance for its services on Apps R1213
The load balancers would be configured for sticky sessions for consistency.Please elaborate more on this.
2. How we can achive Load Balanced applications to SSL off-loading method.How To Redirect HTTP Traffic to HTTPS On A BIG-IP F5 Load Balancer [ID 889308.1]
3. What is the best methods and any whitepapers to achive the same.How To Check Session Persistence On BigIP F5, Cisco Ace, Citrix Netscaler or Radware AppDirector Load Balancer Appliances [ID 601694.1]
Tips and Queries for Troubleshooting Advanced Topologies [ID 364439.1]
You can find also more details in Steven Chan's Blog (search for load balancer) -- http://blogs.oracle.com/stevenChan/
Thanks,
Hussein

How do I increase the thread limit on Linux?

OS: Linux (or Sun Linux)
Kernel: 2.4.9-31enterprise
Memory: 2GB
CPUs: 2
Java: 1.4.1_01
I have a dual processor Cobalt LX50 and I am running
into a thread limit with Java. No matter what I do
with the Java JVM parameters (heap and stack), I
cannot get any more than 949 threads. My "top" and "vmstat" output
shows that I am no where near my memory capacity.
Below is a simple Java program (28 lines long) I have
used to test this limit. My question is simply how do
I go about increasing this limit. Is there some kernel
parameter I can set or maybe have to recompile into
the kernel? My /proc/sys/kernel/threads-max is 16383.
I do not believe my ulimit settings are the problem,
but I will post them anyway. The problem also occurs
on non-Cobalt (plain old PCs) uniprocessor machines
maxxing at about 1018 threads. The other interesting thing is that when I run the same program through the Kaffe VM with -Xms64M and -Xmx512M I do not run into the thread limit problem. Does anyone know what I need to change to get my thread limit up? Also, rewriting the way the program uses threads is not an option.
[root]# ulimit -a core file size (blocks) 0
data seg size (kbytes) unlimited
file size (blocks) unlimited
max locked memory (kbytes) unlimited
max memory size (kbytes) unlimited
open files 1024
pipe size (512 bytes) 8
stack size (kbytes) 8192
cpu time (seconds) unlimited
max user processes 8191
virtual memory (kbytes) unlimited
/*******************************Sample java program
testing thread
limits***********************************************/
import java.util.Timer;
import java.util.TimerTask;
public class Reminder {
Timer timer;
static int cnt;
public Reminder(int seconds) {
timer = new Timer();
timer.schedule(new RemindTask(), seconds*1000);
class RemindTask extends TimerTask {
public void run() {
System.out.println("Time's up!");
timer.cancel(); //Terminate the timer thread
public static void main(String args[]) {
System.out.println("About to schedule task.");
cnt = 0;
while (true) {
new Reminder(90);
System.out.println("Thread #" + ++cnt + "
scheduled.");

Confer also:
http://forum.java.sun.com/thread.jsp?forum=37&thread=358276

Linux Performance Pack

Rob,
     I hope you get to see this message. I tried the Performance pack
for Linux on WLS 5.1.0 SP3 posted on this newsgroup on 04 Jul.
     libmuxer.so is put inside /weblogic/lib/linux, which is also in my
$LD_LIBRARY_PATH. I still get the error/warning:
Wed Jul 26 22:26:18 CDT 2000:<E> <Performance Pack> Unable to load
performance pack, using Java I/O.
Please advise if you need any info.....
Eric

Hi,
     My Linux runs
* Redhat 6.1
* Sun jdk 1.2.2
     I guess that it must be the native vs. green threads problem here.
I remember that Sun Linux jdk 1.2.2 only supports green threads. Does that
mean I have to use other jdk like IBM's?
Thanks
Eric
In article <[email protected]>,
Rob Woollen <[email protected]> wrote:
Strange, it works fine here.
Did you export LD_LIBRARY_PATH (if you are using a sh variant)?
Can you provide as much information about your environment / jvm as
possible?
Also, you should know that the performance pack will only work with java
vms which use native threads. I
-- Rob
Chi-hsuan Lai wrote:
Rob,
I hope you get to see this message. I tried the Performance pack
for Linux on WLS 5.1.0 SP3 posted on this newsgroup on 04 Jul.
libmuxer.so is put inside /weblogic/lib/linux, which is also in my
$LD_LIBRARY_PATH. I still get the error/warning:
Wed Jul 26 22:26:18 CDT 2000:<E> <Performance Pack> Unable to load
performance pack, using Java I/O.
Please advise if you need any info.....
Eric

ORACLE XML PARSER FOR JAVA FOR AIX

Hi people!
I'm looking for the Oracle XML Parser for Java 9.0.2.0.0C, my 9iAS is BI Installation 9.0.2.3, where can I get it? In the Downloads Section there is only the version for 10g, and the existing versions for 9i are not for AIX (my OS is AIX 5.2L).
Thanks.

Thanks for your help, I navigate through this link and, even it shows a table where appears the release for AIX (9.2.0.6.0), when I get to http://www.oracle.com/technology/tech/xml/xdk/software/prod/utilsoft_java.htm
it shows me only downloads for Sun, Linux and HP-UX, but not for AIX.
Has the version for AIX being deprecated or something like that?

Paid research for software developers in San Francisco ($150 or $200)

OTIVO is recruiting software developers to participate in a Web site research study. Through a structured set of questions and exercises, you will be asked to provide feedback about a Web site.
In exchange for a $150 cash incentive, we are inviting you to participate in a 1-hour interview on Wednesday, April 16 or Thursday, April 17 at 451 Hayes Street in San Francisco.
Interviews will be video taped. Before the interview, you will be asked to sign a consent form, and you will receive the incentive in cash at the conclusion of the interview.
Participants who can commit to staying up to 2.5 hours will receive a $200 cash incentive.
If you are a software developer and are available for 1-2.5 hours on April 16 or 17, please complete the survey below by copying/pasting the text in an email and placing an X in the [ ] spaces that best fit your answer to each question.
Then email it to [email protected]. Please do not call or send faxes to OTIVO.
WE WILL ONLY CONTACT YOU IF YOU ARE SELECTED FOR THE RESEARCH.
Name: _____________
Email: _____________
Mobile or work telephone: _________________ (where we can contact you during the day)
1. What is your current job title?
[ ] software developer
[ ] application architect
[ ] system administrator
[ ] database administrator
[ ] technical manager
[ ] program manager
[ ] project manager
[ ] CTO, CEO, CIO, etc.
[ ] other (describe here: __________ )
2. How long have you been in your current position or how long have been working in the same/similar capacity? (for example, how long have you been a software developer?)
[ ] less than a year
[ ] 1-2 years
[ ] 2-4 years
[ ] 4-6 years
[ ] more than 6 years
3. Who is your current employer and what type of industry do you work in? (industry such as financial services, hardware development, software development, health care, and so on �)
[ ] I�m not currently employed
[ ] I am self-employed in ________ industry
[ ] My employer is: ___________ in ________ industry
4. How many people are employed where you work?
[ ] 10 or fewer people
[ ] 11-99 people
[ ] 100-999 people
[ ] 1000 or more people
5. What are your top responsibilities at your job? Or, if unemployed, what were your responsibilities at your last job?
[ ] Software/Application development
[ ] Coding software application(s)
[ ] Quality Assurance
[ ] Systems Administration
[ ] Other -- Please describe: __________________
6. When did you last participate in a focus group or a usability interview?
Month: ____
Year: _____
[ ] I�ve never participated in a focus group or a usability interview
7. How often do you use the Web (not including Web email usage)?
[ ] Under 5 hours per week
[ ] 5 or more hours per week
8. Please check which of the following sites you have used and briefly describe how you used them or what you looked for when you used them:
[ ] java.sun.com
How have you used it or what did you look for?
[ ] sunonedev.sun.com
How have you used it or what did you look for?
[ ] soldc.sun.com
How have you used it or what did you look for?
[ ] msdn.microsoft.com/
How have you used it or what did you look for?
[ ] www.ibm.com/developerworks
How have you used it or what did you look for?
[ ] forum.java.sun.com
How have you used it or what did you look for?
[ ] forum.sun.com
How have you used it or what did you look for?
[ ] wireless.sun.com:
How have you used it or what did you look for?
[ ] developer.forte.com
How have you used it or what did you look for?
[ ] developer.iplanet.com
How have you used it or what did you look for?
9. Do you work with any of the following software applications/platforms? (check all that apply and briefly describe how it is used)
[ ] J2EE
How do you use it or for what is it used?
[ ] JSP, EJB, XLST, et al.
How do you use it or for what is it used?
[ ] Oracle, MS-SQL, MySQL, et al.
How do you use it or for what is it used?
[ ] Fortran
How do you use it or for what is it used?
[ ] C++
How do you use it or for what is it used?
[ ] Solaris
How do you use it or for what is it used?
10. Which application, web, portal or integration server products do you use? (check all that apply and briefly describe how they are used)
[ ] Sun ONE (formerly iPlanet)
How do you use it or for what is it used?
[ ] IBM WebSphere
How do you use it or for what is it used?
[ ] BEA WebLogic
How do you use it or for what is it used?
[ ] Other: (describe) _____
How do you use it or for what is it used?
11. Which IDE do you use?
[ ] VI
[ ] Notepad
[ ] JBuilder
[ ] Sun ONE Studio
[ ] IBM WebSphere Studio Application Developer
[ ] Microsoft Visual Studio
[ ] Other: (describe) _____
12. Do you work with any of the following? (check all that apply)
[ ] Sun Linux Development Tools
[ ] Sun ONE Studio Enterprise Tools for Solaris
[ ] Sun ONE Application Framework Web & Directory Servers
[ ] Sun ONE Identity Server
[ ] Sun ONE Web Server
[ ] Sun ONE Directory Server
[ ] Sun ONE Portal Server
[ ] Sun ONE Certificate Server
[ ] Sun ONE Active Server Pages
[ ] Sun ONE Web Proxy Server
[ ] Sun ONE Application Server
[ ] Sun ONE Integration Server EAI Edition
[ ] Sun ONE Integration Server B2B Edition
[ ] Sun ONE Connector Builder
[ ] Sun ONE J2EE Connector Architecture
[ ] Sun ONE Message Queue
[ ] Sun ONE Calendar Server
[ ] Sun ONE Messaging Server
[ ] Sun ONE Solstice X400 Messaging
[ ] Sun ONE SunForum
13. How do you use the software products and technologies you checked in Question 12 above? For example, for an intranet, for an ecommerce Web site, for groupware � please briefly describe the environment or application:
14. What day and time works best for you? Check all that apply.
[ ] Apr 16, 9am (1 hour for $150)
[ ] Apr 16, 9am (up to 2.5 hours for $200)
[ ] Apr 16, 10:30am (1 hour for $150)
[ ] Apr 16, 1:00pm (1 hour for $150)
[ ] Apr 16, 1:00pm (up to 2.5 hours for $200)
[ ] Apr 16, 2:30pm (1 hour for $150)
[ ] Apr 16, 4pm (1 hour for $150)
[ ] Apr 17, 9am (1 hour for $150)
[ ] Apr 17, 9am (up to 2.5 hours for $200)
[ ] Apr 17, 10:30am (1 hour for $150)
[ ] Apr 17, 1:00pm (1 hour for $150)
[ ] Apr 17, 1:00pm (up to 2.5 hours for ($200)
[ ] Apr 17, 2:30pm (1 hour for $150)
[ ] Apr 17, 4pm (1 hour for $150)
PLEASE NOTE: YOU ARE NOT SCHEDULED UNTIL CONFIRMED BY OTIVO

OTIVO is recruiting software developers to participate in a Web site research study. Through a structured set of questions and exercises, you will be asked to provide feedback about a Web site.
In exchange for a $150 cash incentive, we are inviting you to participate in a 1-hour interview on Wednesday, April 16 or Thursday, April 17 at 451 Hayes Street in San Francisco.
Interviews will be video taped. Before the interview, you will be asked to sign a consent form, and you will receive the incentive in cash at the conclusion of the interview.
Participants who can commit to staying up to 2.5 hours will receive a $200 cash incentive.
If you are a software developer and are available for 1-2.5 hours on April 16 or 17, please complete the survey below by copying/pasting the text in an email and placing an X in the [ ] spaces that best fit your answer to each question.
Then email it to [email protected]. Please do not call or send faxes to OTIVO.
WE WILL ONLY CONTACT YOU IF YOU ARE SELECTED FOR THE RESEARCH.
Name: _____________
Email: _____________
Mobile or work telephone: _________________ (where we can contact you during the day)
1. What is your current job title?
[ ] software developer
[ ] application architect
[ ] system administrator
[ ] database administrator
[ ] technical manager
[ ] program manager
[ ] project manager
[ ] CTO, CEO, CIO, etc.
[ ] other (describe here: __________ )
2. How long have you been in your current position or how long have been working in the same/similar capacity? (for example, how long have you been a software developer?)
[ ] less than a year
[ ] 1-2 years
[ ] 2-4 years
[ ] 4-6 years
[ ] more than 6 years
3. Who is your current employer and what type of industry do you work in? (industry such as financial services, hardware development, software development, health care, and so on �)
[ ] I�m not currently employed
[ ] I am self-employed in ________ industry
[ ] My employer is: ___________ in ________ industry
4. How many people are employed where you work?
[ ] 10 or fewer people
[ ] 11-99 people
[ ] 100-999 people
[ ] 1000 or more people
5. What are your top responsibilities at your job? Or, if unemployed, what were your responsibilities at your last job?
[ ] Software/Application development
[ ] Coding software application(s)
[ ] Quality Assurance
[ ] Systems Administration
[ ] Other -- Please describe: __________________
6. When did you last participate in a focus group or a usability interview?
Month: ____
Year: _____
[ ] I�ve never participated in a focus group or a usability interview
7. How often do you use the Web (not including Web email usage)?
[ ] Under 5 hours per week
[ ] 5 or more hours per week
8. Please check which of the following sites you have used and briefly describe how you used them or what you looked for when you used them:
[ ] java.sun.com
How have you used it or what did you look for?
[ ] sunonedev.sun.com
How have you used it or what did you look for?
[ ] soldc.sun.com
How have you used it or what did you look for?
[ ] msdn.microsoft.com/
How have you used it or what did you look for?
[ ] www.ibm.com/developerworks
How have you used it or what did you look for?
[ ] forum.java.sun.com
How have you used it or what did you look for?
[ ] forum.sun.com
How have you used it or what did you look for?
[ ] wireless.sun.com:
How have you used it or what did you look for?
[ ] developer.forte.com
How have you used it or what did you look for?
[ ] developer.iplanet.com
How have you used it or what did you look for?
9. Do you work with any of the following software applications/platforms? (check all that apply and briefly describe how it is used)
[ ] J2EE
How do you use it or for what is it used?
[ ] JSP, EJB, XLST, et al.
How do you use it or for what is it used?
[ ] Oracle, MS-SQL, MySQL, et al.
How do you use it or for what is it used?
[ ] Fortran
How do you use it or for what is it used?
[ ] C++
How do you use it or for what is it used?
[ ] Solaris
How do you use it or for what is it used?
10. Which application, web, portal or integration server products do you use? (check all that apply and briefly describe how they are used)
[ ] Sun ONE (formerly iPlanet)
How do you use it or for what is it used?
[ ] IBM WebSphere
How do you use it or for what is it used?
[ ] BEA WebLogic
How do you use it or for what is it used?
[ ] Other: (describe) _____
How do you use it or for what is it used?
11. Which IDE do you use?
[ ] VI
[ ] Notepad
[ ] JBuilder
[ ] Sun ONE Studio
[ ] IBM WebSphere Studio Application Developer
[ ] Microsoft Visual Studio
[ ] Other: (describe) _____
12. Do you work with any of the following? (check all that apply)
[ ] Sun Linux Development Tools
[ ] Sun ONE Studio Enterprise Tools for Solaris
[ ] Sun ONE Application Framework Web & Directory Servers
[ ] Sun ONE Identity Server
[ ] Sun ONE Web Server
[ ] Sun ONE Directory Server
[ ] Sun ONE Portal Server
[ ] Sun ONE Certificate Server
[ ] Sun ONE Active Server Pages
[ ] Sun ONE Web Proxy Server
[ ] Sun ONE Application Server
[ ] Sun ONE Integration Server EAI Edition
[ ] Sun ONE Integration Server B2B Edition
[ ] Sun ONE Connector Builder
[ ] Sun ONE J2EE Connector Architecture
[ ] Sun ONE Message Queue
[ ] Sun ONE Calendar Server
[ ] Sun ONE Messaging Server
[ ] Sun ONE Solstice X400 Messaging
[ ] Sun ONE SunForum
13. How do you use the software products and technologies you checked in Question 12 above? For example, for an intranet, for an ecommerce Web site, for groupware � please briefly describe the environment or application:
14. What day and time works best for you? Check all that apply.
[ ] Apr 16, 9am (1 hour for $150)
[ ] Apr 16, 9am (up to 2.5 hours for $200)
[ ] Apr 16, 10:30am (1 hour for $150)
[ ] Apr 16, 1:00pm (1 hour for $150)
[ ] Apr 16, 1:00pm (up to 2.5 hours for $200)
[ ] Apr 16, 2:30pm (1 hour for $150)
[ ] Apr 16, 4pm (1 hour for $150)
[ ] Apr 17, 9am (1 hour for $150)
[ ] Apr 17, 9am (up to 2.5 hours for $200)
[ ] Apr 17, 10:30am (1 hour for $150)
[ ] Apr 17, 1:00pm (1 hour for $150)
[ ] Apr 17, 1:00pm (up to 2.5 hours for ($200)
[ ] Apr 17, 2:30pm (1 hour for $150)
[ ] Apr 17, 4pm (1 hour for $150)
PLEASE NOTE: YOU ARE NOT SCHEDULED UNTIL CONFIRMED BY OTIVO

CC compiler problem with string.h

Hi,
I use Sun Studio Express (3-Dec-2006 Build) on SUSE Linux 10.1.
When I was trying to compile the following code, I got an error message regarding <string.h>. The same codes works fine with g++ compiler.
Please give me some comments on that.
Thanks.
Tae-Suk Bae
#include <stdio.h>
#include <string.h>
int main(int argc, char**argv) {
char str[80];
strcpy(str,"Test");
printf("%s\n",str);
return 0;
CC -c -g -o build/Debug/Sun-Linux-x86/welcome.o welcome.cc
(/home/baezae/ngsode/Welcome1)welcome.cc:
"/usr/include/string.h", line 272: Error: End of file encountered in macro arguments for "__nonnull".
"/usr/include/string.h", line 272: Error: ")" expected instead of "(".
"/usr/include/string.h", line 272: Error: Unexpected ")" -- Check for matching parenthesis.
"/usr/include/string.h", line 272: Error: Operand expected instead of ";".
"/usr/include/string.h", line 426: Error: "strerror_r(int, char*, unsigned)" is expected to return a value.
"welcome.cc", line 30: Error: "}" expected instead of "end of file".
6 Error(s) detected.
----------------------------------------------------------

I have that feeling that this has been solved in later version, February build. It is available for download here: http://developers.sun.com/sunstudio/downloads/express.jsp
Maybe compiler experts will be able to provide more accurate answer, though.

Adding video driver to Solaris 8

I have installed Solaris 8 on my Dell Latitude laptop and everything is OK except that the configuration assistant for the X window system doesn't include my video card (NeoMagic 2360B). I have a driver which works on the FreeBSD implementation on the same system and was wondering how I go about either:
1) adding the driver to the system so that it will be an
available option when configuring X, or
2) performing a detailed configuration (specifying
chipset, video RAM, available modes etc)
Thanks for your help!

Well, the situation is became worst, I have found in 'format' the 'type' subcommand, which let you to modify the virtual geometry. Unfortunately I have not found any geometry where the newfs command is finished (the OS hangs). The HDD's parameters (from Maxtor)
Actual Cyls 79656
Max Cyls 16383
Hds 16
Sect 63
I've tried
19602 16 256
16383 19 256
19914 16 252
9957 32 252
.... and others. Always hangs creating superblocks.
I don't believe that HDD can't be configurable by Sun (Linux, even W2K are able to handle it!)

Best way to define mapping

Hi
I am evaluating Kodo in the prospect to migrate an existing application
which uses a different JDO implementation and I am currently wondering
what is the best way to define the mapping.
So far, we have only used __.jdo__ metadata file with default values and
some jdo extension. Then we delegate to the JDO implementation the task to
define the schema and create it in the relationnal database.
I am trying to reproduce the same process with KODO. But :
- I am encountering some problem with the kodo extension.(but they are
certainly some mistake from my part, I will introduce some at the end of
this email)
- I understand that kodo can use a mapping file.
Here are my very first questions
- Which method should I use. Only JDO extension, or mapping file.
- if I use the mapping file, is it possible to only specify info for
fields which are different than default behavior of kodo
- If I use the jdo extension only how can I :
specify the name of a table for a particular class?
specify the name of a join table?
Specify the name of a column for a particular java field?
Is there a way to configure the mapping tool to use a custom naming
convention for the whole project (for a particular package)?
I already made a small evaluation of kodo 7 month ago with version 3.1.0,
but with this version, there was a bug discussed in this forum which
forced me to use the mapping file. But I had to define the complete
mapping, which was a huge task especially when you have to repeat field
mapping for sub classes. My first tests with kodo 3.2.2 works with jdo
extension, but I still have some issues as you can see from my questions.
Thank you for your answer.
Nicolas GANDRIAU
Environment description
Kodo 3.2.2 evaluation
MySQL 4.1.4-gamma'-Max'
MySQL Connector/J 3.0.15-ga
JDK 1.4.2_05 de Sun
Linux Kernel 2.6.8 (Mandrake 10.1)
IDEA 4.5.2

Nicolas,
You need to define which mapping file using the kodo.jdbc.MappingFactory
extension. Note that with either format that the mapping information
must be complete (or you can have Kodo create them for you):
http://solarmetric.com/Software/Documentation/3.2.2/docs/ref_guide_conf_kodo.html#kodo.jdbc.MappingFactory
The metadata mapping factory is more verbose though all of your
information is in a single file. .mapping files are more consise but
need to be deployed in addition to your .jdo metadata.
Nicolas GANDRIAU wrote:
Hi
I am evaluating Kodo in the prospect to migrate an existing application
which uses a different JDO implementation and I am currently wondering
what is the best way to define the mapping.
So far, we have only used __.jdo__ metadata file with default values and
some jdo extension. Then we delegate to the JDO implementation the task to
define the schema and create it in the relationnal database.
I am trying to reproduce the same process with KODO. But :
- I am encountering some problem with the kodo extension.(but they are
certainly some mistake from my part, I will introduce some at the end of
this email)
- I understand that kodo can use a mapping file.
Here are my very first questions
- Which method should I use. Only JDO extension, or mapping file.
- if I use the mapping file, is it possible to only specify info for
fields which are different than default behavior of kodo
- If I use the jdo extension only how can I :
specify the name of a table for a particular class?
specify the name of a join table?
Specify the name of a column for a particular java field?
Is there a way to configure the mapping tool to use a custom naming
convention for the whole project (for a particular package)?
I already made a small evaluation of kodo 7 month ago with version 3.1.0,
but with this version, there was a bug discussed in this forum which
forced me to use the mapping file. But I had to define the complete
mapping, which was a huge task especially when you have to repeat field
mapping for sub classes. My first tests with kodo 3.2.2 works with jdo
extension, but I still have some issues as you can see from my questions.
Thank you for your answer.
Nicolas GANDRIAU
Environment description
Kodo 3.2.2 evaluation
MySQL 4.1.4-gamma'-Max'
MySQL Connector/J 3.0.15-ga
JDK 1.4.2_05 de Sun
Linux Kernel 2.6.8 (Mandrake 10.1)
IDEA 4.5.2
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com

CSA on Other Operating Systems

When does Cisco plan to have a CSA client for other operating systems like SuSe 10 desktop and OES server?
Also, when will they have a client for 64-bit windows architecture? (64-bit may only seem like the buzz word of the moment, but with all future [Microsoft/Novell/SUN/Linux]Server technology coming out 64-bit it makes me nervous when in my environment is mandated to have CSA on all machines including Servers.)
Does Cisco have a client in development for additional operating systems?

There are QFS drivers for linux client support, not sure about windows.

Cli pdf printer for Solaris?

I'm trying to find a tool that allows one to print directly to the printer PDF documents without having to go thru a pdf reader GUI.
I've investigated xpdf + gpdf, kpdf to no avail.
The reason for this request is i'm generating many pdf documents from a compiler / compiler project that i'm writing that will eventually be released as open source.
I've gone to Google but haven't been too successful regarding Sun / Linux type tools though there are cli tools available for windows.
Any suggestions would be appreciated.
Thank u for yours eyes and ears
Dave Bone

Adobe acroread can do that, the only problem is that the new acroread (seven and later) which are available for the SPARC platform requires an X11 display, but that can be ignored with a simple script and Xvfb:
#!/bin/sh
INPUT_FILE=$1
PRINTER_DESTINATION="-d ppm"
if [ $2 ]; then
PRINTER_DESTINATION="-d $2"
fi
# For Acroread to function correctly it needs a X11 display, the easiest way
# to fullfill this requirement is to use Xfvb.
# Check if Xvfb socket exists, if it doesnt, start it:
if [ ! -r /tmp/.X11-unix/X1 ]; then
/usr/openwin/bin/Xvfb :1 > /dev/null 2>&1 &
fi
DISPLAY=localhost:1
export DISPLAY
#Spool the file first, rather than toss it directly to lp:
/usr/sfw/bin/acroread -toPostScript -size a4 -pairs $INPUT_FILE $INPUT_FILE.ps
lp -c -s $PRINTER_DESTINATION $INPUT_FILE.ps
rm $INPUT_FILE.psThe ancient acroread version available for the Solaris x86 platform does not require a X11 display, but still accepts the -toPostScript option.

Version that iFS 1.1 support and Character_set

Hello,
- Which version of SUN, Linux, Compaq 64 are
supported with iFS 1.1 ?
- What is the implication of the CHARACTER_SET that had been defined during the installation for the clients ?
- Does the index language will be the same for all the documents?
- How does it work with the database, whether this one has not the same CHARACTER_SET defined ?
- How does it work during the UPLOAD(browse) of one document. In view of the fact that it's also possible to choose a CHARACTER_SET?
Thanks in advance for the help.
Regards
Albertini F.
null

It is your Tomcat's problem, not oracle.
Set your jserv.conf

Does Directory Server Resource Kit 5.2.1 work on Windows XP?

The Sun ONE Directory Server Resource Kit 5.2.1 is supported on the
following platforms, as per the URL
http://wwws.sun.com/software/download/products/3f74a0db.html.
1. Solaris 8 & 9 - SPARC
2. Solaris 9 x86
3. AIX 5.1
4. HP-UX 11.11
5. RedHat Linux 7.2
6. Sun Linux 5.0
7. Windows 2000 Adv. Server sp2
8. Windows NT 4.0 SP6a
Which software should be used for LDAP access for the following platforms:
a) Red Hat Linux Advanced Server 2.1
b) Red Hat Linux Advanced Server 3.0
c) Red Hat Linux 6
d) Windows XP Professional
e) Solaris 2.6 (also referred to as Solaris 6).

Which software should be used for LDAP access forthe
following platforms:
a) Red Hat Linux Advanced Server 2.1
b) Red Hat Linux Advanced Server 3.0So far, DSRK has not been validated for these
platforms.
c) Red Hat Linux 6Don't know/cannot remember. DSRK 5.1 works with 2.2
kernels, see
http://wwws.sun.com/software/download/products/3ed6999
3.html
d) Windows XP ProfessionalSo far, DSRK has not been validated for this
platform, either.
It is theoretically possible that XP support may come
with Sun Java Studio,
http://wwws.sun.com/software/learnabout/javastudio/ind
ex.html
e) Solaris 2.6 (also referred to as Solaris 6).DSRK 5.1 also supports Solaris 2.6.We had ported our app to RH Server 2.1 using 5.2.1 with no problem... however, we encountered undefined symbol errors attempting to build against 5.2.1 on RH Server 3.0, specifically __ctype... symbols.
Doe Sun intend on supporting RH servers? or only the older RH distributions?

Slow? polyhedron comparison

I ran the Polyhedron (http://www.polyhedron.com) set of general
fortran benchmarks as a test of code speed. Some 64bit ran slower
than I expected, which I've not investigated yet. Polyhedron ran all the
ones on the left with an Opteron 2.4G dual cpu, with 333 sdram.
This is similar to our older Sun v2100z's
Polyhedron only tests Linux compilers; I tested Sun Studio11
with patches to late May, on Linux/Solaris, with Lahey as a check.
My Lahey number is within about 6% of their number. I didn't try very
hard to find the best compile options, unlike Polyhedron. I just
used -fast for Studio11.
times in seconds per iteration; larger is slower.
The solaris 10 numbers are derived from a 2.8GHz system,
scaled to compare with 2.4GHz; the dram speed was 400 instead
of 333 so it is not quite apples and apples.
                  from www.polyhedron.com                                 run at UTIG
           ---------------- linux --------------------           ----- linux -----   solaris-10
name     Absoft g95    Intel Lahey NAG    Paths PGI          Lahey sunl32 sunl64 suns32 suns64
AC       10.44 21.25 13.60 24.59 27.37 10.53 14.28        21.48 19.96 40.23 13.60 35.65
AERMOD   38.63 48.19 28.67 48.96 58.67 37.65 35.22        54.00 37.27 47.13 34.58 31.30
AIR      14.46 23.45 12.32 17.66 16.49 15.00 16.79        17.81 14.12 13.02 14.12 12.64
CAPACITA 71.41 111.24 104.03 124.90 119.22 71.02 71.84        130.29 106.54 96.71 103.8 97.06
CHANNEL 17.74 27.06 13.09 17.76 15.93 18.14 15.98        22.67 11.62 11.53 12.72 13.45
DODUC    42.42 52.73 36.60 57.65 57.16 40.91 37.82        51.72 45.21 46.23 42.08 37.76
FATIGUE 6.60   37.83 10.64 20.11 21.79 6.38 11.47        18.45 8.84   8.59   8.80   8.318
GAS_DYN 6.35   22.10 7.84   15.07 21.56 8.73 8.55         19.32 13.97 13.62 13.45 12.81
INDUCT   33.11 49.67 44.24 91.52 60.16 30.56 38.37        81.90 44.82 47.25 44.12 42.39
LINPK    27.81 29.43 27.19 27.03 27.23 27.57 29.02        35.43 23.21 22.92 25.83 26.90
MDBX     20.02 27.10 20.49 25.81 22.33 20.19 21.48        21.96 18.45 18.78 18.58 18.86
NF       26.55 51.07 28.59 42.79 30.69 25.76 30.55        56.89 28.40 28.06 27.32 28.26
PROTEIN 51.67 75.13 49.06 90.58 65.38 51.31 63.65        90.69 64.70 65.03 65.39 65.55
RNFLOW   31.71 55.24 44.40 46.83 44.85 29.80 42.57        43.39 39.84 38.79 34.97 35.82
TEST_FPU 19.33 32.09 20.09 24.30 23.55 19.66 20.94        29.77 18.26 18.42 19.84 19.39
TFFT     8.12   8.65   8.48   8.76   8.40   8.30 8.74         10.84 8.31   7.95   8.30   8.271
GeoMean 21.19 35.84 22.77 33.06 31.37 21.38 24.11        35.04 24.37 25.47 23.64 24.51
   ratio   1      1.69   1.07   1.56   1.48   1.00 1.13         1.65   1.15   1.20   1.11   1.15
The geometric mean ratios suggest that the Sun linux -alpha- compiler may already be close enough to
the best result now available to make it a strong contender.
regards,
mw

What do you expect?! Oracle 9i and Oracle 8i are different particularly by optimizer cost-based(9i) and rule-based(8i) :)
what about both execution plans?

Using isnan

I want to use isnan() function in a fortran code which I am compiling with mpif77/mpif90 or mpf95. I am getting error message
mpf95 -c main.F -xO3 -Bstatic -e -Iinclude -I/opt/SUNWhpc/HPC7.1/include -I/home/hpc2073/SPfft/SPfft_32/include
if (isnan(utau).or.isnan(ubulk)) then
^
"main.F", Line = 190, Column = 14: ERROR: IMPLICIT NONE is specified in the local scope, therefore an explicit type must be specified for function "ISNAN".
if (isnan(resid)) then
^
"main.F", Line = 2063, Column = 11: ERROR: IMPLICIT NONE is specified in the local scope, therefore an explicit type must be specified for function "ISNAN".
f90comp: 3810 SOURCE LINES
f90comp: 2 ERRORS, 0 WARNINGS, 0 OTHER MESSAGES, 0 ANSI
gmake: *** [main.o] Error 1
why is it not recognizing isnan() as intrinsic function.

I am having the same problem. I am using ISNAN() on the pc. When I ported my code to the Sun Solaris Fortran I wrote a little function:
FUNCTION HEC_ISNAN (X)
LOGICAL HEC_ISNAN
REAL X
INTEGER isn
isn = 0
isn = IR_ISNAN(X)
HEC_ISNAN = .FALSE.
IF (isn /= 0) HEC_ISNAN = .TRUE.
RETURN
That worked fine. I copied everything over to a Sun Linux Fortran and now I am getting:
hec_lib_call.o(.text+0x5b6): In function `hec_isnan_':
: undefined reference to `ir_isnan_'
make: *** [steadyx] Error 1
I tried the above suggestion about using ieee_is_nan,
FUNCTION HEC_ISNAN (X)
USE, INTRINSIC :: IEEE_ARITHMETIC, IEEE_EXCEPTIONS
~code not shown
isn = ieee_is_nan(X)
and I get the following:
USE, INTRINSIC :: IEEE_ARITHMETIC, IEEE_EXCEPTIONS
^
"hec_lib_call.f", Line = 205, Column = 58: ERROR: Unexpected syntax: "=>" was expected but found "EOS".
isn = ieee_is_nan(X)
^
"hec_lib_call.f", Line = 218, Column = 12: ERROR: Assignment of a LOGICAL expression to a INTEGER variable is not allowed.
If I take the USE... statement out, it does not find the ieee_is_nan call. Am I missing something? I'm not familiar with either the Sun or the Linux environment.
I'm using Sun Studio 12 for Linux.
Thanks for any help.

Sun Linux 5.0.9

Similar Messages

Maybe you are looking for