Sun Management Console 2.0 - RMIERROR

Hi Guys,
SMC Loads up fine, but none of the modules are loading for me sSuch as performance).
The error which is returned is :
Performance is not able to connect to the server. Reason: RMIERROR. Verify that the server is running. If it is running, try stopping and restarting it.
I've tried
* stopping and starting wbem
* deleting /var/sadm/wbem
* deleting /var/sadm/smc
* uninstalling and then re-installing all smc packages
No luck so far.
I think it has something to do with my hostname. When i am loading up the tool, it asks me to grant permission for applets being loaded from SV4503 and localhost.
This never happened before.
Any ideas?
- Michael

Hi,
The documentation and user's guide are available at:
http://www.sun.com/software/sunmanagementcenter/docs/index.html
Thanks
Kalpesh

Similar Messages

Sun Management Console doesn't support MD5 passwords?

I recently converted all our Sun systems to use MD5 passwords, using the Linux-BSD algorithm. I chose the Linux-BSD algorithm for compatibility reasons. After giving root a new password, now stored in MD5 format, I can no longer log in to the Sun Management Console (smc). I had the same problem with DB2. Switching root's password back to CRYPT fixed the issue.
Is this a known problem that Sun is working on? And how does this happen? Shouldn't the application leave authentication to the OS?
Mark

IIRC the Solaris 10 Basic admin guide talks about this issue.
alan

Management console 3.0 Java Errors

I have just installed Sun Management Console 3.0 and the install reported no errors
When I go to start the console es-start -c I get a list of fonts not installed and the a list of Java errors. The path for the fonts seems correct in the startup.profile. Any help on this would be much appreciated.
Thanks
Joe

Hi,
You can use Ctrl+ALT+End to open the menu for the remote computer.
Tim Quan
TechNet Subscriber Support in forum
If you have any feedback on our support, please contact [email protected]
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not
actually answer your question. This can be beneficial to other community members reading the thread.

Adding Management Console After Solaris 10 Install

What packages must be installed to add Sun Managment Console to a base Solaris 10?
I've added SUNWmccom (and the SUNWj3dev package it depends on); but, this does not install the Management Console's binary, /usr/sbin/smc.
Thank you.

Answering my own question :-}
Per Solaris 10 "System Administration Guide: Basic Administration" Chapter 2 "Working With the Solaris Management Console (Tasks)":
SUNWmc
SUNWmcc
SUNWmccom
SUNWmcdev
SUNWmcex
SUNWbmc
SUNWCprog

Sun mangement console help!!

I try to use smc command to invoke sun management console
and it show up , it said no smc running
and have a dialog to specify the .tbx ?? (toolbox?)
I am new to solaris but. I ever use smc before to create new user.
I would like to use smc Could anyone help
or are there any other management tools
regards thanks

Solaris express 10/06
It's said it disable SMC.sorry but i'm not sure how is it in that version. I've got the supported solaris "enterprise" or the "Solaris Express Community Release" alias Nevada alias Solaris 11 alias SunOS 5.11 or... :-)
anyway, if you want nice GUI (it has the new JDS based on 2.14 gnome), try it
dvd: http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=7&PartDetailId=Sol-Express_b42a-DVD-x86-SP-G-B&TransactionId=try
cd: http://javashoplm.sun.com/ECom/docs/Welcome.jsp?StoreId=7&PartDetailId=Sol-Express_b42a-x86-SP-G-B&TransactionId=try

Getting error while opening Sun access manager console

We are facing problem while accessing console of Sun Access Manager. We got No Page Found error whenever we try to access the Sun Access Manager console. We have tried restarting the directory server and web server but even that doesn�t help us. Following are the error that gets recorded in log files:-
ERROR: AuthD init() com.iplanet.dpro.session.SessionException: AuthD failed to get auth session
ERROR: Error creating service session java.lang.NullPointerException

The ns-slapd.exe process belongs to the Directory Server. You should therefore check if your DS instance is set up properly.
Michael

Solaris 10 & Management Console RMIERROR

The Management Console started but when I tried to use it I received a RMIERROR.
I then did
/etc/init.d//init.wbem stop
followed by
/etc/init.d//init.wbem start
I then received a startup message. But when I went back to the desk top and started the
console again, I recieved the RMIERROR.
I have 1Gb of ram and 160 Gb of disk.

I'm having the same problem on Solaris 10 (SPARC). Is there a resolution yet? It was working while my machine thought it's hostname was UNKNOWN, but now I have set it, it no longer seems to work

Cannot start Solaris Management Console in Solaris 9

I cannot start the Solaris Management Console in Solaris 9. The splash screen appears for a few seconds, then nothing else.
There is a error: "Assertion Fail: Offset < fFileSize ..." something like that.
Please help me~~~~~~~

Java Bug 4838130:
http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
env JAVA2D_DEBUGFONTS=1 smc
The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
/usr/openwin/lib/X11/fonts/TrueType, i.e.
env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

SMC - Solaris Management Console in whole root zone

Hi,
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.
Thanks...

Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

Enhanced Storage Problem in Solaris Management Console Started in XManager

I have Sun Fire 480 with solaris 5.9 installed on it. I use XManager 1.3.9 on windows 2000 workstation to connect to it and launch Solaris Management Console (smc). After starting smc I point to Management Tools -> This Computer (sf480dbs) -> Storage -> Enhanced Storage. At that moment Log In dialog appears and I give root user name and password. After a few seconds SMC disappears (exits). If I look at CDE Error log there is the following exception
Thu Jul 31 21:00:36 2003 (/usr/dt/bin/dtexec) /usr/sbin/smc
Exception while creating engine named com.sun.java.help.search.DefaultSearchEngine for view: javax.help.SearchView@4db52b
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
at java.lang.reflect.Constructor.newInstance(Constructor.java:274)
at javax.help.search.MergingSearchEngine.makeEngine(MergingSearchEngine.java:148)
at javax.help.search.MergingSearchEngine.merge(MergingSearchEngine.java:82)
at javax.help.JHelpSearchNavigator.merge(JHelpSearchNavigator.java:160)
at javax.help.JHelp.addHelpSet(JHelp.java:322)
at javax.help.JHelp.helpSetAdded(JHelp.java:288)
at javax.help.HelpSet.fireHelpSetAdded(HelpSet.java:344)
at javax.help.HelpSet.add(HelpSet.java:256)
at com.sun.management.viper.console.gui.help.VHelpViewer.consoleAction(VHelpViewer.java:138)
at com.sun.management.viper.console.VConsole.notifyListeners(VConsole.java:566)
at com.sun.management.viper.console.VConsole.consoleAction(VConsole.java:512)
at com.sun.management.viper.console.gui.VGUIConsole.consoleAction(VGUIConsole.java:566)
at com.sun.management.viperimpl.console.gui.SMCConsole.consoleAction(SMCConsole.java:292)
at com.sun.management.viperimpl.console.BaseConsoleManager.notifyListeners(BaseConsoleManager.java:370)
at com.sun.management.viperimpl.console.gui.GUIConsoleManager.loadOnlineHelpForTool(GUIConsoleManager.java:1198)
at com.sun.management.viperimpl.console.BaseConsoleManager.loadToolAndReplaceStub(BaseConsoleManager.java:2139)
at com.sun.management.viperimpl.console.BaseConsoleManager$ClickLoader.run(BaseConsoleManager.java:2060)
at com.sun.management.viper.util.ThreadPool$ThreadWorker.run(ThreadPool.java:138)
Caused by: java.security.InvalidParameterException
at com.sun.java.help.search.DefaultSearchEngine.<init>(DefaultSearchEngine.java:75)
... 21 more
Can anyone tell me anything what is problem?
I am newby to solaris and any ideas will be appreaciated.
Thanks in advance
David Suladze

Try search the WEB for your display adapter drivers. However, most of new especially intergated graphics are still not supported.
You may try to get it working with xsun, run kdmconfig and specify as display adapter VGA or Super VGA. I know that in some cases it helps.
As well do the same with Xorg and run /usr/X11/bin/xorgcfg, try to find somekind of generic VGA in drivers that are listed there.
As I know, smc runs only in graphical mode.
I saved the settings and pressed F2 for testing. I could see the displayDid you see buttons on that display (something like "yes", "no")?
xsun is very hard to set with most of display adapters and monitors, sometimes it shows only part of the screen, so you might not to see these buttons. However if you see them, press "yes" (or something like that, I dont exactly remember). Then reboot and your computer should start the GUI.

Solaris Management Console (SMC) - Solaris 9 x86

I�ve just installed Solaris 9 (x86) version. I�m unable to install Solaris Management console.
I was using below command to add listed patches:
pkgadd -d . SUNWpmgr SUNWrmui SUNWlvmr SUNWlvma SUNWlvmg
I�m unable to find these packages on cd1. Somehow they�re on cd2. These cd�s are direct extract from Sun�s web site.
Anyway when I run the pkgadd command I�m getting the following error:
�No package associated with (SUNWpmgr)�
When I look into the SUNWpmgr, there are 2 files (pkgmap., pkginfo.) and 3 dir (install, archive, reloc)
Same with other packages
Please help me.

I was able to correct this problem on my server
The .server file is the smc java keystore that contains
the private/public key pair for SSL
You can create this file by executing
cd /usr/sadm/lib/smc/bin
certtool -genkey
Once the keys are generated execute
/etc/init.d/init.wbem stop
/etc/init.d/init.wbem start
if your smpatch no longer works
take a look at the following article
http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/spfaq

Solaris Management Console toolbox could not be loaded

Hello,
when I start SMC I get this error, toolbox http://ultra:989/toolboxes/smc.tbx could not be loaded. I only noticed this yesterday, and I think it is related to some patch that was applied recently. When I did wget http://ultra:898/toolboxes/smc.tbx I got these headers
HTTP/1.0 200 OK
Date: Thu, 27 Oct 02005 21:21:52 GMT
Server: Tomcat/2.1
Content-Type: text/plain
Servlet-Engine: Tomcat/2.1 (Java 1.4.0_01; SunOS 5.9 sparc; java.vendor=Sun Microsystems Inc.)
Last-Modified: Tue, 31 Aug 02004 21:27:14 GMT
and wget complains of
Last-modified header invalid -- time-stamp ignored.
perhaps it is this header that's invalidating the download and so SMC complains?
This is solaris 9 on an ultra 5, fully patched (up to yesterday).
Thanks for your help!

I seem to have come across the same issue as well. On an Ultra 2, I'm running Solaris 10 1/06 (after an upgrade from Solaris 10 5/05). SMC 2.1 was working fine before I applied the latest Recommended Solaris 10 patch cluster. Now when starting smc, I get the message,
"Server Not Running
No Solaris Management Console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running."
with stop signs for all the management tools. I do not have patch 121309 installed which I suspect applies to the 6/06 release. In comparison to a working system, neither workstation had the entry for "smc 898/tcp" in its /etc/services file. I added it but did not make a difference so I removed the entry.
"/etc/init.d/init.wbem stop/start" did not do the trick. Using dananderson's advice in,
http://forum.java.sun.com/thread.jspa?threadID=5057915
I ended up having to completely remove and re-add all packages that had to do with smc using the Solaris 1/06 installation CD set. I confirmed smc was working again without the error. Update Manager suggested I add patches 121308-08 and 124188-02. Hesitantly, I added those two patches, rebooted and confirmed smc produced the error message again. I removed patches 121308-08 and 124188-02 and smc started working again. I will have to refrain from applying those patches so it continues to run.
I wish I had further explanation as to why those updates are killing my smc.

Solaris Management Console in whole root zones

Is it possible to run smc in whole root zone? Is there a howto for this? I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.

Hi dnzrnd,
dnzrnd wrote:
Is it possible to run smc in whole root zone? Is there a howto for this?
I have created a whole root zone in my x86 and sparc systems but I can't seem to manage the zones through smc (Adding users, share disks and etc).
I was able to manage my sparse zones with smc but for some reason smc won't even start in whole root zone. The whole root zone does not seem to have smcserver and bunch of other directories relating to smc.SunMC should install and run fine in a whole-root zone: I haven't heard of any problems. Are you maybe confusing "Sun Management Center" (this forum) with "Solaris Management Console" (a different product)?
Regards,
[email protected]
http://www.HalcyonInc.com
New !! : http://forums.HalcyonInc.com !!

Management console problem after installing recommended patch cluster

Hello everyone.
I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
"Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
java.rmi.RemoteException: Server RMI is null:
at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
I don't know solaris very much and don't know what else to do, please help.
Thanks in advance.

Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O

Solaris 9 x86 platform update 4 8/03 can not start Management Console

smc& but cannot start management console 2.1
no problem on solaris 8 x86 platform.
Error as below :
I cannot start the Solaris Management Console in Solaris 9. The splash screen appears for a few seconds, then nothing else, core dumped.
There is a error: "Assertion Fail: Offset < fFileSize ............../../../src....
Any ideas ??????

Java Bug 4838130:
http://developer.java.sun.com/developer/bugParade/bugs/4838130.html
suggests to trace the problem by running the java application with JAVA2D_DEBUGFONTS defined, so try
env JAVA2D_DEBUGFONTS=1 smc
The bug report also documents a workaround: Set the environment variable JAVA_FONTS to
/usr/openwin/lib/X11/fonts/TrueType, i.e.
env JAVA_FONTS=/usr/openwin/lib/X11/fonts/TrueType smc

Sun Management Console 2.0 - RMIERROR

Similar Messages

Maybe you are looking for