Sun managment center Report manager problem

Hi All,
I have installed SUNMC 4.0. I am having difficulty with PRM.
Data avalability table is showing status as collected and I am able to generate alarm summary report for all the host.
But I am not able to make reports for each individual hosts.
Help me on this ??
Log is saying
sunmc taskreq completed with status NOTARGET
Thanks
Srini

Hi Srini,
Are you using the default reports, or are you trying to make your own? Also, remember that SunMC thinks "kernel reader" and "kernel reader simple" modules are different... so even though they contain common numbers (i.e. 5 minute load average) you have to be sure to specify the correct module when you're making your graphs.
Have you seem the PRM walkthrough here?
Your best bet is to contact Oracle support to help get things working. If you're trying to get reports that PRM maybe can't create, you could also take a look at our [Enterprise Reporter|http://www.halcyoninc.com/products/EnterpriseReporter/index.php] (it can graph SunMC Agent numbers too).
Regards,
[email protected]

Similar Messages

  • SSRS 2008 r2 - the Report Manager won't load unless "/Reports" is added to the DNS entry in address bar

    Need some direction, please.
    We are moving off  SSRS 2005 to a new server with SSRS 2008R2. The old installation (2005) a DNS entry was created "reports" with the ip address and port number simple. In the Configuration manager the Report Manager Virtual Directory
    is "Reports". Website is Default web site. Typing "reports" into the address bar opens up report manager. When this is done the address shows as reports/reports/pages/folder etc.
    The new installation is configured the same(?). DNS entry "reports2" with new ip address and port number. In the Configuration manager the Report manager URL virtual directory is "Reports" URLs: =
    http://servername:port/Reports. The issue is when typing "Reports2" into the address bar the report manager won't open unless "reports" is added to the dns name i.e. http://reports2/reports
    is entered.
    This thread took me to more like kind thread than my searches. Went into IIS in the default web site I added an htm file with a redirect. Then started it, it works. Maybe due to my inexperience but seems counter intuitive as I thought Reporting Services did
    away with any reliance on IIS.

    Hi Urquhart,
    According to your description, if you type "Reports2" in the browser, then you want to redirect to the report manager homepage in SSRS 2008 R2, right?
    In Reporting Services 2008 R2, it uses HTTP.SYS for HTTP access and it’s independent of Internet Information Server(IIS). The role for HTTP.sys in Reporting Services is that, HTTP.sys receive the user's request, and then send it to report server. Report
    Server handle the request(e.g. authenticate the users), and then use HTTP.sys the send HTTP responses again. In a word, HTTP.sys is just a driver, which allow us to communicate the clients(browser) with Report Server without Microsoft Internet Information
    Server(IIS).
    So, since HTTP.SYS doesn’t provide URL redirection function, we are not able to redirect "Reports2" to report manager homepage by default. If we want to use redirect function, we should add a .html file in IIS to redirect the user to the report
    manager.
    Similar thread for your reference:
    SSRS 2008 URL Redirecting
    SSRS 2008 R2 Homepage Redirection
    If you have any question, please feel free to ask.
    Best regards,
    Qiuyun Yu
    Qiuyun Yu
    TechNet Community Support

  • Cost center report,Profit center report

    Dear Experts,
                         Pls tell me what are the reports availble in  ecc6 for cost center & profit center. Pls give T.Code for report.
    In general for controlling reports are standard or we have to customise the report.
    Thanks in advance
    regards
    avudaiappan

    Dear Avudaiappan,
    Cost Center:
    KSB9      -           Planning Report: Cost Centers
    PC00_MNA_CC_MAN   -   Cost Center Report - Manager
    OKB6                 Generate Cost Center Acctg. Reports
    OKR6                 Change Report List for Cost Centers
    PC00_MNA_CC_ADM      Cost Center Report - Administrator
    Profit Center:
    S_ALR_87009734       Profit Center Report: 2 Versions
    S_ALR_87010786       Profit Center Report            
    S_ALR_87011787       Profit Center Report            
    S_ALR_87013957       Profit Center Report: 2 Versions
    Regards,
    Naveen.

  • Sun Management Center and Reduced Core Installs

    hey all,
    I just discovered the Sun Management Center and the tool looks great for the servers I need to manage. However due to security reasons all our servers are installed as Reduced Network Core installs where we then add the minimal extra packages.
    At the moment I am still testing everything but I am a bit stuck here and I believe that I might be missing some packages. I can get the server to find the agent but there I cannot load any of the modules. Sniffing the traffic does seem to show that the info is sent ( a list of names I recognise as module names) but the console does not show anything and reports an error unable to load module info.
    Is there a full package list that is required to run the management center server and client? The agent runs fine on my desktop but that is a full install.
    I already noticed the command ping is required, but am unsure about snmp daemons. What other packages will i need to install? The manual doesn't really give any information on that and seems to start from a full install

    Never mind,
    The problem was in the firewall who was defragmenting packets. Once I disabled that feature the server worked fine.
    Seems just ping is enough to get the installer working.

  • How to integrate a Solaris x86 server on Sun Management Center ?

    Hello people,
    I want to integrate a Solaris x86 server on Sun Management Center platform.
    If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
    In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
    It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
    /opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
    I supose that in this directory, SunMC will install sparc binary files
    At this point, I can't follow the installation and abort it.
    Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
    Thanks

    Hi Hisham,
    hishooooo wrote:
    Dear Gents,
    I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
    successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
    my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
    could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • Sun Management Center - how to install the SMC agent on linux

    Dear Gents,
    I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
    successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
    my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
    could you guide please?
    appreciate your support and cooperation
    Best Regards
    Hisham

    Hi Hisham,
    hishooooo wrote:
    Dear Gents,
    I have one X86 Solaris Server configured and installed to be Sun Management Center Server.
    successfully i could monitor the Sun Solaris Servers after i have installed the SMC agent on them.
    my problem is that i could not install the SMC agent on Red Hat Linux. as i could not find an easy document or steps to do so.
    could you guide please?If you still have a copy of your SunMC media around, the same ["es-inst"|http://docs.sun.com/app/docs/doc/820-2215/command-line-1?l=en&a=view] program you use to install Solaris Agents should work on Linux as well. It autodetects OS type and will install Solaris packages or RPMs as appropriate.
    Regards,
    [email protected]
    http://www.HalcyonInc.com

  • Microsoft System Center Configuration Manager 2012 R2 Reports

    Hi ;
    I can't run any reports on microsoft system center configuration manager 2012 R2. I see " No items found " when i click reports on microsoft System Center Configuration manager 2012 Console.But i access all reports by internet Explorer. End of
    all , i don't have any problem with queries.I am waiting for your helps.
    Sincerely yours ,

    Hi,
    It sounds like this should be the solution for you, changing the account for the SRS service.
    http://blog.coretech.dk/rja/no-srs-reports-showing-up-in-sccm-console/
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Report Manager problem: The user or group name 'BUILTIN\Administrators' is not recognized. (rsUnknownUserName)

    Hello,
    I have a big  problem with Reporting Services 2005 working on Windows 2003 Server.
    RS work as Network service, on subdomain reporting.mydomain with SSL wildcard certificate *.mydomain,
    Anonymous access: disabled and basic authentication: enabled
    ReportManager and reportServer has defualt virtual folders  (/reporting, /reportserver)
    My problem is:
    1) I can't manage security roles and site settings with report maanger. when I try assign roles to new user or group I get followng error:
    "The user or group name 'BUILTIN\Administrators' is not recognized. (rsUnknownUserName) Get Online Help"
    when i try to execute reports in report manager, parameters controls are not displayed correctly (very simple text boxes) and I can see:
    The selected report is not ready for viewing. The report is still being rendered or a report snapshot is not available. (rsReportNotReady)
    and I can't see my report in browser (IE 6.0) but only export to PDF, Excel...
    other functionality are working  fine i.e upload new files, creatign folders....
    2) Also my reportserver virtual folder does not work correctly.
    When I navigate to mydomain/reportserver I can see content of this virtual folder, than when I navigate to ReportService.soap i can see normal ReportServer view
    reporting.mydomain - /Reportserver/
    [To Parent Directory]
           Montag, 10. April 2006    16:31        <dir> bin
      Dienstag, 6. September 2005    01:12       488278 Catalog.sql
      Dienstag, 6. September 2005    01:12        14738 CatalogTempDB.sql
          Freitag, 21. April 2006    19:45        10555 Copy of rsreportserver.config
          Freitag, 14. April 2006    17:29           76 global.asax
           Freitag, 15. Juli 2005    01:12        26582 ModelGenerationRules.smgl
           Montag, 10. April 2006    16:31        <dir> Pages
           Montag, 10. April 2006    16:31        <dir> ReportBuilder
            Montag, 13. Juni 2005    14:07          143 ReportExecution2005.asmx
            Montag, 13. Juni 2005    14:06       196337 ReportingServices.wsdl
            Montag, 13. Juni 2005    14:07          131 ReportService.asmx
            Montag, 13. Juni 2005    14:07          131 ReportService.soap
            Montag, 13. Juni 2005    14:07          139 ReportService2005.asmx
          Dienstag, 13. Juni 2006    20:01        10580 rsreportserver.config
            Montag, 13. Juni 2005    14:07        11845 rssrvpolicy.config
           Montag, 10. April 2006    16:31        <dir> Styles
           Freitag, 17. Juni 2005    01:09         2673 web.config
    but me reports are not displayed correctly, I can run reports but top bar with parameters, export and print function are not displayed in correct format.
    (simple textboxes, and icons)
    reporting.mydomain/ReportServer - /
    Microsoft SQL Server Reporting Services Version 9.00.1399.00
    I think it is security issue. What schould i do to solve this problems?
    Wojtek

    Hi Wojtek
    I just wanted to know if you found a solution for part (1).  I just recently encountered the problem where:
    "when i try to execute reports in report manager, parameters controls are not displayed correctly (very simple text boxes) and I can see:
    The selected report is not ready for viewing. The report is still being rendered or a report snapshot is not available. (rsReportNotReady) "
    However all my reports are run from the most recent data.  The rsReportNotReady message appears in Report Manager but not the Report Server interface; the latter is able to render the reports.   But both have incorrectly displayed textbox inputs.
    Thanks
    nemo

  • How to integrate Solaris x86 server on Sun Management Center ?

    Hello people,
    I want to integrate a Solaris x86 server on Sun Management Center platform.
    If I'm not wrong, SunMC doesn't run for Solaris x86, server and client only as console with Java.
    In speat of it, I try to install Sun Management Center 3.0 Agent for Solaris x86.
    It seems to be ok, install packages, but when execute es-setup script, intents to create the following directory:
    /opt/SUNWsymon/base/bin/sparc-sun-solaris2.8
    I supose that in this directory, SunMC will install sparc binary files
    At this point, I can't follow the installation and abort it.
    Can anybody give me ideas to install and integrate my solaris x86 server on SunMC ?
    Thanks

    Hi
    From the Unix prompt enter oemapp console(for v9.x). If you are using earlier versions it is oemapp console (for starting the console) and oemapp dbastudio(for starting dba studio)
    For starting OMS enter: oemctrl start oms.
    Hope this helps
    sarath

  • 3rd party MIBs in Sun Management Center

    Hello:
    I have just installed a Sun Mangement Center 3.5 environment.
    Also configured some SNMP object, some as proxy monytoring and other just as SNMP ping.
    Now I have to configure some SNMP objects for which I have SNMPv2 MIBS and I dont know how to do it.
    The Installation manual talks about configuring a legacy agent as a subagent.......is that the way to go?
    I,ve read the instructions but there are some things I can�t understand.
    The SNMP object is configured to transmit to the SMC server and to 1162 port.
    The MIB file is on the SMC server machine is called sylantro.my and just placed it in /opt/SUNWsymon/sylantro/ directory, should this file reside in another directory?
    How should I fill the info in subagent-registry-d.x?
    sa2 = {
         type     = legacy
         persist     = false
         snmpPort = "1162"
         errorAction = restart
         startCommand     = "/usr/lib/snmp/mibiisa -p %port"
         stopCommand     = "kill -9 %pid"
         pollInterval = 60
         pollHoldoff = 60
         oidTrees = 1.3.6.1.4.1
         snmpVersion = SNMPv2
         securityLevel = noauth
         securityName =public
    Questions:
    is the name sa2 in the example arbitrary? or is related to the MIB file?
    startCommand which command should I use to start????? I only have a MIB file, or should I use mibiisa command? if so, where is the MIB file related to the subagent-registry-d.x file?
    oidTrees is this data in the MIB file? I found some documents that expresed 1.3.6.1.4.1.3945 I found that 3945 in the MIB, but the previous numbers do not.
    snmpVersion is SNMPv2 ok?
    securityLevel is ok to place noauth here? when setup for SMC was done I typed something for seed and also the default public string
    How sould this SNMP object be configured in SMC to be able to monitor that object?
    Ok this is all, thanks for any help.
    here is an extrac from the sylantro.my MIB file
    -- FILENAME :: sylsnmpsrv.my
    -- VERSION :: $Id$
    -- MODULE :: N/A
    -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ DESCRIPTION ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    -- Defines the server MIB.
    -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    -- Completed Engineer DESCRIPTION
    -- ========= ======== ====================
    -- Oct/08/99 jml Created
    -- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    SYLANTRO-SERVER-MIB1 DEFINITIONS ::= BEGIN
    --IMPORTS
    -- MODULE-IDENTITY, OBJECT-TYPE, Integer32
    -- FROM SNMPv2-SMI
    -- DisplayString
    -- FROM SNMPv2-TC;
    IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE,
    Integer32, Counter32
    FROM SNMPv2-SMI
    enterprises
    FROM SNMPv2-SMI
    DisplayString
    FROM SNMPv2-TC;
    sylantroSystems OBJECT IDENTIFIER ::= { enterprises 3945 }
    sylSnmpMib OBJECT IDENTIFIER ::= { sylantroSystems 1 }
    sylSnmpMibServers OBJECT IDENTIFIER ::= { sylSnmpMib 2 }
    sylantroServerV1 MODULE-IDENTITY
    LAST-UPDATED "9908170000Z"
    ORGANIZATION "Sylantro Systems"

    Hi cva01,
    If you'd like to poll your device for all its data and see it all inside SunMC then you'd have to use the SDK that comes with SunMC and the "Module Builder" module to import the MIB (or do it by hand). If it's something you'll need to use a lot of my company can build Sylantro monitoring from that MIB for you.
    If you only want traps that come from the device, we'll be releasing an Event Gateway module soon that allows a SunMC Agent to decode and log (and alarm on) SNMP traps.
    The subagent example you found shows how to have SunMC forward specific data acquisition requests through itself to another SNMP Agent. i.e. if there's another SNMP process on the same system as the SunMC Agent and you'd prefer to only have to poll a single process instead of two.
    Regards,
    [email protected]

  • Cannot install Performance Reporting Manager - Corrupt db?!?!?

    Hi all,
    We previously had PRM running but disabled it as it didnt seem to run very well. We are trying to reinstall it now but are hitting a few problems.
    Launching /opt/SUNWsymon/sbin/es-uninst and selecting the Performance Reporting Manager option to uninstall fails:-
    Unable to complete Sun Management Center cleanup
    Error cleaning up core schema ...
    Performance Reporting Manager database environment not completely removed.
    Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
    PRM database removal failed
    A problem occurred with Performance Reporting Manager uninstall.
    Making list of packages to uninstall...
    Sorting list of packages according to reverse timestamp...
    Removing package : SUNWesdrg...
    Removal of <SUNWesdrg> was successful.
    Removing package : SUNWessrg...
    Removal of <SUNWessrg> was successful.
    Removing package : SUNWeslrg...
    Removal of <SUNWeslrg> was successful.
    Removing package : SUNWescrg...
    Removal of <SUNWescrg> was successful.
    Removing package : SUNWesprm...
    Removal of <SUNWesprm> was successful.
    Removing package : SUNWesarg...
    Removal of <SUNWesarg> was successful.
    Looking at the "/var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859"; log I can see:-
    Starting database...
    Successfully enabled service sunmc-database
    Found previous reference schema
    Database Error Encountered...
    ERROR:  function sp_delete_group_objects() does not exist
    HINT: No function matches the given name and argument types. You may need to add explicit type casts.
    Unable to complete Sun Management Center cleanup
    Error cleaning up core schema ...
    Stopping database...
    Successfully disabled service sunmc-database
    Performance Reporting Manager database environment not completely removed.
    Please see /var/opt/SUNWsymon/install/uninstall_swpv-smc-phys.110222133640.28859 for more details.
    PRM database removal failed
    As I cannot uninstall all the database correctly I can't seem to install it either, even when I select NOT to preserve data.
    Any help would be appreciated.
    Cheers
    Neil

    Got it working. Can now use my DiNovo Keyboard without its dongle. Yeah. NO BSODS.
    This is what I did. I put in the dongle for the keyboard, rebooted to an account with Admin privileges, used flashcards to go to BT not the F8 key the actual BT one that shows your comp name and ID#. I removed the dongle for the keyboard, turned on the keyboar adn clicked its connect button, clicked the flashcard and it brought up BT Settings.  It did not BSOD.  So I think Imo454 has it right about the dongle and using it for drivers.  Although it did not show anything installing.  Set up device, it saw keyboard, I configured settings, closed BT setting manager and now have Icon in tray and BT information manager works.
    Reinstall your stack again and then try this.  I also gave my users permission to the BT Manager and BT Info.  I don't think that made a diff but it can't hurt.  Not full permission but write and mod as well as the standard read. 
    The Toshiba stack from what I can tell is very persnickity.  Everywhere I  have read to fix this talks of this.  I got my stack from the Toshiba Europe site.  They have more current stacks than USA.  Plus if you run on Toshiba HW you do not need a new key.
    Thanks to you Imo454 and to Jerry.

  • Not able to start the Sun Java System Access Manager 7 Console

    Hi All,
    I have successfully installed the Sun Java System Portal Server 7 on RHEL 4.0.The problem I am facing is not able to start the Sun Java System Access Manager 7 Console while accessing the URL: http://fqdn:8080/amconsole
    As soon as I try to access this URL it gives me following Excepiton:::::::
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    com.iplanet.jato.NavigationException: Exception encountered during forward
    Root cause = [java.lang.NullPointerException]
         com.iplanet.jato.view.ViewBeanBase.forward(ViewBeanBase.java:386)
         com.iplanet.jato.view.ViewBeanBase.forwardTo(ViewBeanBase.java:267)
         com.iplanet.am.console.base.ConsoleServletBase.onUncaughtException(ConsoleServletBase.java:338)
         com.iplanet.jato.ApplicationServletBase.fireUncaughtException(ApplicationServletBase.java:1023)
         com.iplanet.jato.ApplicationServletBase.processRequest(ApplicationServletBase.java:469)
         com.iplanet.jato.ApplicationServletBase.doPost(ApplicationServletBase.java:324)
         com.iplanet.jato.ApplicationServletBase.doGet(ApplicationServletBase.java:294)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:747)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:860)
         sun.reflect.GeneratedMethodAccessor106.invoke(Unknown Source)
         sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         java.lang.reflect.Method.invoke(Method.java:585)
         org.apache.catalina.security.SecurityUtil$1.run(SecurityUtil.java:249)
         java.security.AccessController.doPrivileged(Native Method)
         javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         org.apache.catalina.security.SecurityUtil.execute(SecurityUtil.java:282)
         org.apache.catalina.security.SecurityUtil.doAsPrivilege(SecurityUtil.java:165)
    If anyone have any idea about the cause of this error,please let me know.All suggestions are welcome .
    Thanx and Regards,
    Chirag.

    Hi All,
    I am having exactly the same problem with the same stack trace. Has anybody have an idea how to fix this?
    I have downloaded the Java Identity Management Suite.(java_es-5-identsuite-ga-windows-x86.zip) The first time installation was fine and I was able to bring the Access Manager console. I was able to create users groups etc.
    However, when I uninstalled and installed it again, I got exactly the same error described in the thread. Running "amserver start" and "amserver restart" did not help. I did the installation one more time
    but again I got the same error.
    Thanks for the help.
    celikkan

  • Management Center install error "Unsupported OS version: 5.10

    I couldn't find anything on sunsolve that talks about a work around. Has anyone else had this problem and how did you resolve it?
    Trying to install on a sparc system under Solaris 10
    Thanks in advance,
    Bill

    You'll need at least Sun Management Center 3.5 Update 1a, which is available in the nearest Solaris 10 media kit, or at:
    http://www.sun.com/software/solaris/sunmanagementcenter/get.xml
    Now that 3.5.1b is available maybe you should get that one.
    //Magnus

  • SCOM 2012 System Center Operations Manager has stopped working when adding Web Console.

    I am trying to ad the Web console to one of my Management Servers but at the point where it asks what website to use it fails with the "System Center Operations Manager Setup has Stopped working error.
    This is the included information.
    Problem Event Name: CLR20r3
      Problem Signature 01: setupchainerui.exe
      Problem Signature 02: 7.0.9538.0
      Problem Signature 03: 509042f2
      Problem Signature 04: System
      Problem Signature 05: 4.0.30319.18022
      Problem Signature 06: 506a7689
      Problem Signature 07: 1cf5
      Problem Signature 08: 72
      Problem Signature 09: System.UriFormatException
      OS Version: 6.2.9200.2.0.0.272.7
      Locale ID: 1033
      Additional Information 1: 79c6
      Additional Information 2: 79c63d7b6daeea05a42903612b7137d2
      Additional Information 3: 88ec
      Additional Information 4: 88ec54f8fa758d8069cdb2ad5cd91e2b
    The only error I get in the log file is this.
    Error: :Error:IsReportingValidToInstall failed SRS instance not provided 
    I don't understand why I would be getting an SRS error, our reports run fine.
    Thanks,
    Gary

    Hi Gary,
    Did you end up finding a solution to this issue? The GUI and silent/command line installer are failing for me in the same spot.
    App Log Errors:
    Application: SetupChainerUI.exe
    Framework Version: v4.0.30319
    Description: The process was terminated due to an unhandled exception.
    Exception Info: Microsoft.EnterpriseManagement.Common.ServiceNotRunningException
    Stack:
       at Microsoft.EnterpriseManagement.Common.Internal.ExceptionHandlers.HandleChannelExceptions(System.Exception)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.CreateEndpoint[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
    Microsoft.EnterpriseManagement.Common.Internal.SdkChannelObject`1<Microsoft.EnterpriseManagement.Common.Internal.IDispatcherService>)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.ConstructEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
    Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.RetrieveEnterpriseManagementGroupInternal[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0,
    Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
       at Microsoft.EnterpriseManagement.Common.Internal.SdkDataLayerProxyCore.Connect[[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089],[System.__Canon, mscorlib, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]](Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings,
    Microsoft.EnterpriseManagement.DataAbstractionLayer.ClientDataAccessCore)
       at Microsoft.EnterpriseManagement.ManagementGroup.InternalInitialize(Microsoft.EnterpriseManagement.EnterpriseManagementConnectionSettings, Microsoft.EnterpriseManagement.ManagementGroupInternal)
       at Microsoft.EnterpriseManagement.ManagementGroup.Connect(System.String)
       at Microsoft.SystemCenter.Essentials.SetupFramework.WebConsoleSite.GetValidationProperties(System.Object)
       at System.Threading.ExecutionContext.RunInternal(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.ExecutionContext.Run(System.Threading.ExecutionContext, System.Threading.ContextCallback, System.Object, Boolean)
       at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem()
       at System.Threading.ThreadPoolWorkQueue.Dispatch()
    Faulting application name: SetupChainerUI.exe, version: 7.0.9538.0, time stamp: 0x509042f2
    Faulting module name: KERNELBASE.dll, version: 6.3.9600.16656, time stamp: 0x5318237f
    Exception code: 0xe0434352
    Fault offset: 0x00000000000043c8
    Faulting process id: 0x638
    Faulting application start time: 0x01cf9a697847d9c8
    Faulting application path: C:\Users\szb\AppData\Local\SCOM\SetupChainerUI.exe
    Faulting module path: C:\Windows\system32\KERNELBASE.dll
    Report Id: c52d5d75-065c-11e4-80c2-00155dcb0b37
    Faulting package full name:
    Faulting package-relative application ID:

  • Sun Embedded Lights Out Manager

    Im go crazy with this KVM .The applet is not load and in the java console im have this error:
    Java Web Start 1.6.0_11
    Using JRE version 1.6.0_11 Java HotSpot(TM) Client VM
    User home directory = C:\Documents and Settings\FgamesNet
    [ INFO ] - Temp Directory: C:\DOCUME~1\FGAMES~1\LOCALS~1\Temp\
    [ INFO ] - GC Total Memory : 7270400
    [ INFO ] - GC Free Memory : 3459688
    [ INFO ] - RKVM Version : V2.50.08
    [ INFO ] - Release Date : 2007-07-04
    [ INFO ] - Project ID : S39/S40/S90/S92/S93
    [ INFO ] - Designer : Kemmy Tseng
    [ INFO ] - Client OS : Windows XP
    [ INFO ] - Client JVM Version : 1.6.0_11
    [ INFO ] - Client OS Architecture : x86
    [ INFO ] - Client OS Language : el
    [ INFO ] - User Working Directory : C:\Documents and Settings\FgamesNet
    [ INFO ] - Load Library Path : C:\DOCUME~1\FGAMES~1\LOCALS~1\Temp\82.103.159.113\libWindowsVDecode.dll
    [ INFO ] - Load Library Path : C:\DOCUME~1\FGAMES~1\LOCALS~1\Temp\82.103.159.113\libWindowsStorage.dll
    [ INFO ] - Load Library Path : C:\DOCUME~1\FGAMES~1\LOCALS~1\Temp\82.103.159.113\libWindowsSecurity.dll
    java.lang.ArrayIndexOutOfBoundsException: 1
         at com.quanta.g11.java.kvm.model.handler.keyboard.keymap.KeyMapManager.loadKeymapIntoHash(KeyMapManager.java:288)
         at com.quanta.g11.java.kvm.model.handler.keyboard.keymap.KeyMapManager.<init>(KeyMapManager.java:59)
         at com.quanta.g11.java.kvm.model.handler.keyboard.BaseKeyBoardHandler.<init>(BaseKeyBoardHandler.java:49)
         at com.quanta.g11.java.kvm.model.handler.keyboard.WindowsKeyHandler.<init>(WindowsKeyHandler.java:13)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
         at sun.reflect.NativeConstructorAccessorImpl.newInstance(Unknown Source)
         at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(Unknown Source)
         at java.lang.reflect.Constructor.newInstance(Unknown Source)
         at java.lang.Class.newInstance0(Unknown Source)
         at java.lang.Class.newInstance(Unknown Source)
         at com.quanta.g11.java.kvm.model.handler.keyboard.KeyBoardHandlerFactory.getKeyboardHandler(KeyBoardHandlerFactory.java:31)
         at com.quanta.g11.java.kvm.view.RemoteWorkFrame.<init>(RemoteWorkFrame.java:255)
         at com.quanta.g11.java.kvm.model.manager.ConsoleManager.createRemoteWorkFrame(ConsoleManager.java:64)
         at com.quanta.g11.java.kvm.view.RemoteKVMControlView.main(RemoteKVMControlView.java:368)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.sun.javaws.Launcher.executeApplication(Unknown Source)
         at com.sun.javaws.Launcher.executeMainClass(Unknown Source)
         at com.sun.javaws.Launcher.doLaunchApp(Unknown Source)
         at com.sun.javaws.Launcher.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    [ ERROR ] : ConsoleManager : 1
    Please can help me someone?Thx in advance.

    Some code is attempting to set an Array index to an invalid value, as the line below states:
    java.lang.ArrayIndexOutOfBoundsException: 1If this is your program, the following lines point to the code that's the cause. The numbers are line numbers in the source code file.
    at com.quanta.g11.java.kvm.model.handler.keyboard.keymap.KeyMapManager.loadKeymapIntoHash(KeyMapManager.java:288)
    at com.quanta.g11.java.kvm.model.handler.keyboard.keymap.KeyMapManager.<init>(KeyMapManager.java:59)
    at com.quanta.g11.java.kvm.model.handler.keyboard.BaseKeyBoardHandler.<init>(BaseKeyBoardHandler.java:49)
    at com.quanta.g11.java.kvm.model.handler.keyboard.WindowsKeyHandler.<init>(WindowsKeyHandler.java:13)
    If this isn't your applet code, all you can do is report the problem to whomever owns the applet.

Maybe you are looking for