Sun Netra T5220 will not poweron (FATAL: Polling POK Status Time Out)

Hey All,
New to the forums here.
We have a SUN Netra T5220 which we are unable to poweron, failing with a couple FATAL errors.
sc> showlogs
Log entries since Apr 20 07:48:41
Apr 20 07:48:41: Chassis |critical: "CRITICAL ALARM is set"
Apr 20 07:48:41: Chassis |critical: "CRITICAL ALARM is set"
Apr 20 07:48:41: Chassis |critical: "Host has been powered off"
Apr 20 07:52:23: Audit |minor : "root : Set : object = /SYS/power_state : value = on : success"
Apr 20 07:52:33: Chassis |critical: "Apr 20 07:52:33 *FATAL: Polling POK Status Time Out: 0x9f*"
Apr 20 07:52:33: Chassis |critical: "Apr 20 07:52:33 *FATAL: The HOST Processor has a configuration error, forcing a power-down*"
Apr 20 07:52:33: Chassis |critical: "CRITICAL ALARM is set"
Apr 20 07:52:33: Chassis |critical: "Host has been powered off"
Apr 20 08:04:32: Audit |minor : "root : Set : object = /SYS/power_state : value = on : success"
Apr 20 08:04:42: Chassis |critical: "Apr 20 08:04:42 FATAL: Polling POK Status Time Out: 0x9f"
Apr 20 08:04:42: Chassis |critical: "Apr 20 08:04:42 FATAL: The HOST Processor has a configuration error, forcing a power-down"
Apr 20 08:04:42: Chassis |critical: "CRITICAL ALARM is set"
Apr 20 08:04:43: Chassis |critical: "Host has been powered off"
Apr 20 08:07:54: Audit |minor : "root : Close Session : object = /session/type : value = console : success"
Apr 20 08:08:10: Audit |minor : "admin : Open Session : object = /session/type : value = console : success"
Apr 20 08:12:59: Audit |minor : "admin : Set : object = /SYS/power_state : value = on : success"
Apr 20 08:13:09: Chassis |critical: "Apr 20 08:13:09 FATAL: Polling POK Status Time Out: 0x9f"
Apr 20 08:13:09: Chassis |critical: "Apr 20 08:13:09 FATAL: The HOST Processor has a configuration error, forcing a power-down"
Apr 20 08:13:10: Chassis |critical: "CRITICAL ALARM is set"
Apr 20 08:13:10: Chassis |critical: "Host has been powered off"
sc> showfaults
Last POST Run: Sat Mar 26 06:38:35 2011
Post Status: Passed all devices
No failures found in System
curious if any of you all have seen this type of error before and what may be the resolution.
Thanks in advance for any responses,
rbrociek

rbrociek,
It looks like the system board or power distribution board is faulty.
You should open a SR in My Oracle Support.
Regards.

Similar Messages

  • Mountain Lion downloaded from App store will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! My Machine MacBook Pro  OS 10.6.8   Processor 2.66Ghz i

    Mountain Lion downloaded from App store on 11th and 12th June will not install. Downloaded TWICE it times out after 20 secs into install. Can't get any help!!! Going around in circles!!
    My Machine MacBook Pro  OS 10.6.8  
    Processor 2.66Ghz i7,
    4GB memory
    128GB solid state drive
    Purchased 2010

    Thanks very much for the advice. I trawled through the other answers on the site and it appears others had the same issue. I doubled the available space and the install went like clockwork... which is what one would norma;ly expect from Apple :-)
    Maybe Apple should have a ' definitely read me first' notice before a download takes place with CLEAR instructions to have more than the 6GB they indicate ofr the Mountain Lion download

  • HT1338 my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.

    my MAc Book PRO 13" Retina display will not update.  It crashes every time I try to do an update.  I have sent in the information on each update but so far nothing back from Apple.  Also it does not matter what I am trying to update, the operating system, and application, each caused the same crash.   This mac book is less than a month old.

    That is the highest you will be able to go with 3g. You need 3gs or 4 to go any higher (multi processors and more memory needed).  Version 4.2.1 marks the end of your updates for that device.

  • My itunes will not open no matter how many times i try! It says its due to a problem. what do i do?

    My itunes will not open no matter how many times i try! It says its due to a problem. what do i do?

    When you gte requests to locate iTunes.msi like this, the Microsoft Installer Cleanup utility usually fixes it.
    Here is a method for removal, clean up and reinstall of iTunes.
    == uninstall with cleanup ==
    Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
    http://www.apple.com/quicktime/download/win.html
    http://www.apple.com/itunes/download/
    Save the files on your PC.
    Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
    http://support.microsoft.com/kb/290301/
    (To run the program – All Programs>>Windows Install)
    Now use the following method to remove iTunes and its components:
    XP
    http://support.apple.com/kb/HT1925
    Vista
    http://support.apple.com/kb/HT1923
    *If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
    When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
    Restart your PC.
    Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
    Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
    If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
    restart your PC
    Install the stand alone Quicktime and check that it works.
    If it does, install iTunes.
    ===

  • I inserted a mini CD (3") and it will not eject, how can I get it out??

    I inserted a mini CD (3") and it will not eject, how can I get it out??  I tried a little shaking, and restarting and holding the mouse pad down.  I heard the spinning but still cannot eject or read the disc.

    Short of taking it to a repair shop for extraction,  you can shut it down and try shaking the devil out of it.

  • Premiere Pro CC7 and CC6 will not put video or stills onto time line for editing.

    Premiere Pro CC7 and CC6 will not add video or stills onto time line for editing. It wil play the clip but that's it.  I have tried many different vidoe files, mov, avi and others plus jpeg stills, but no matter what i do i cannot move it to time line to edit. I have the 30 day trial version. I have watched the tutorial, done same thing, no luck.
    Any ideas and help appreciated  otherwise I 'll just  bin the whole program. I have tried it on Final Cot pro 7 and there is no problem (thats on the mac, the premiere pro is on pc. )

    Chances are you just need to create a sequence to put them on.
    FAQ: How do I choose the right sequence settings?

  • Mountain Lion purchased from Mac store will not download. 'Downloading' simply stays greyed out for hours.  Nothing I do changes it.  I am running OS 10.6.8 on a 2010 Mac Mini.  What do I do now?

    Mountain Lion purchased from Mac store will not download. 'Downloading' simply stays greyed out for hours.  Nothing I do changes it.  I am running OS 10.6.8 on a 2010 Mac Mini.  What do I do now?

    If you are looking at the front page of the App Store and you are seeing the "downloading" message on the right under Quick Links.
    Try this... Go into the "Purchases" section in the top bar of the App Store find ML in the list you are presented with. Does it say Resume? If so click the button and it will change to Pause. You may have paused it previously and forgot.
    If not then do as Csound1 suggested and simply wait for it to finish
    Jerry

  • HT2500 without changing settings, iMac mail V4.6, 1)will not save password 2)takes accounts offline 3)will not except password 4)will not send mail from accounts every time.     What happen?

    without changing settings, iMac mail V4.6,  1)will not save password   2)takes accounts offline  3)will not except password   4)will not send mail from accounts every time.
        What happen?  How do I correct this?

    Hi Nuch1,
    I found an article that is contains very thorough Mail troubleshooting steps:
    OS X Mail: Troubleshooting sending and receiving email messages
    http://support.apple.com/kb/TS3276
    You can use that article to figure out what part of the email "ecosystem" is the cause of the issue, and it can also help you attempt to resolve it.
    Hope that helps,
    David

  • The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

    The last week, Firefox will not load up the NEW YORK TIMES. So, I have had to use Safari to do so. If this continues, I'm going to quit using your browser, and begin using Safari all the time!

    There are several other similar posts in this forum with the answers. Your post appears third in my Google search today looking for a solution so I thought I'd add the solution here as well.
    It is obviously a bug in either (or both) Firefox and the NYT.
    The quickest solution is to simply go to the VIEW Menu in Firefox, then the ZOOM option and choose RESET.
    I use Mac and this happens in Firefox 3.6.10. It does not happen in other browsers like Safari, Chrome and Camino, and it did not occur before last week.
    It has also occurred in the iOS version of Safari on iPad. Not sure how to fix it there.

  • Will not let me log in, first time installing on this computer.

    Will not let me log in, first time installing on this computer.

    What is the error message you see when it will not let you log in... is it one of the below problems?
    Sign Out When Sign In http://forums.adobe.com/thread/1450581?tstart=0 may help
    -and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    And, just in case you ever have this problem...
    BLANK Cloud Screen http://forums.adobe.com/message/5484303 may help
    -and step by step http://forums.adobe.com/thread/1440508?tstart=0
    -and http://helpx.adobe.com/creative-cloud/kb/blank-white-screen-ccp.html
    Mac Spinning Wheel https://forums.adobe.com/message/5470608
    -Similar in Windows https://forums.adobe.com/message/5853430

  • Some apps on my macbook pro will not open,,,they bouce a few times and disappear.  would someone please give me a straightforward answer on why this might be haappening(started after updates))   please?

    some apps on my macbook pro will not open,,,they bouce a few times and disappear.  would someone please give me a straightforward answer on why this might be haappening(started after updates))   please?

    Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?

  • I have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop

    i have turned firewall off but my iphone will still not update. it still says 'network time out' i am using a dell laptop and i want to update my iphone4 to iOS 5.

    Things in this thread might be helpful too.
    https://discussions.apple.com/thread/3382814?start=0&tstart=0

  • HT4623 My ipad will not power down anymore.  Each time I try to power down it shuts down, then powers up straight away.  I have checked my settings and cannot find anything to  help me.

    MY ipad will not power down anymore.  Each time I try to power down it shuts down then powers up again.

    See if this fixes it. Reboot and let the iPad start up, then try to power down.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

  • Is it possible to stop the system time outs on my imac ,i have tried 5 times in the last 24 hrs.each time it will go for maybe 3hrs and then times out.each time i have to start the download all over again,thanks,

    is it possible to stop the system time out on my imac? i have tried 5 times in the last 24 hrs.it will run for approx.3hrs,and then times out and i have to start
    from the beggining again

    What is the url of the file your are downloading?
    What web browser are you using?
    What type of connection do you have to your isp?  phone line, dsl, cable, fios...
    Try iCab.  It lets you restart a download.
    icab.de
    Robert

  • Photosmart Essentials will not install Fatal Error

    Windows Vista Home Premium.  -- I recently move my Photosmart D7560 printer to a different computer.  I need to install Photosmart Essentials to allow me to print to a printable CD.  I downloaded the latest drivers for the full featured installation of the D7560, but the Photosmart Essentials will not install.  The printer works and prints fine, but the printing software gives a Fatal Error during installation. The message is Problem with windows Installer Packatge.  A program required for the install couldn not run.  Contact HP!  I tried the download 2 times from HP and 1 time from CNET.  Same error each time.  I do not have the original disk that came with the printer.  Is that the problem?  How can I get Essentials installed?  Thanks. 

    Hi there,
    This article should cover the issue you are experiencing. Give the steps outlined a shot and let us know if it helps.
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Maybe you are looking for

  • App-V CRM 2013 Outlook Client and Office 2013 Click to Run

    Hi, I'm trying to get going with enbing the CRM 2013 for Outlook client with the VL version of Office Pro Plus 2013.  I have successfully published and use Office App-V package in a test environment.  App-V version 5.0 SP2 is installed on the client

  • Best way to go about having two people use the same form?

    Hi guys, Relativly new to livecycle and I need some help. I've been asked to make a form that 2 different people will have access too, what I need to do is as followed: Person 1 Only has access to the first 5 pages and is able to fill out the form Pe

  • Pass user name from MII to SAP R/3 via JRA

    When calling in MII a BAPI that executes a goods movement in SAP R/3 via a JRA connection, the user name of the JRA connection is passed to SAP R/3 and not the user name of the person who executed the action in MII. This means that the documented goo

  • Set Background/Foreground color for Cell Renderer in JComboBox

    Hello, I was wondering if there is a way to change default settings for when I browse items under a JComboBox's cell renderer? I want the item's color to change (to what I set it to), when mouse enters the item. As of now, the cell's background color

  • Help with pdf issues on Safari?

    Am having trouble viewing pdfs via Safari.  When I open them, I only have a black screen.  Any suggestions?