SUN ONE Ldap - Default value is not getting displayed
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The default value for the attribute has been given in the SUN ONE Ldap. But it is not getting displayed in our application.
Can any one help me in this for this issue.
Regards,
K. Senthil Kumar
I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.
Similar Messages
-
Default Value is not getting displayed in SUN ONE Ldap
Hello,
I have created an attribute in slapd.user_at.conf and it is associated in slapd.user_oc.conf.
The attribute default value is given through SUN ONE Console. But, In our application the default value is not getting displayed.
We need the default value to run our applicatin. Can anyone help me for this issue
Regards,
K. Senthil KumarHi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi -
Values are not getting displayed in screen
Hi Experts,
I have used BAPI_CHARACT_CREATE to upload characteristics(t-code: ct04),
All data are uploaded into the Master Table, while changing the same in t-code ct04 the Value and Description is not getting displayed in screen( in Table control).
NOTE: If i use BAPI_CHARACT_GETDETAIL to get the details of a character i am getting all the values which i have uploaded. (But not in the t-code ct04).
BDC and LSMW is not working for this t-code.
Please help me out.
Thanks and Regards,
LOGUHi,
i think you have not released the objects to repository. test and try again..
thanks
karthik -
Default Pulldown value is not getting displayed on upper form of Second step of Unifier Workflow
Hi,
I'm new to Unifier and facing one issue while using the PullDown field on Upper. If I use the Pull down field with Default option selected in DataDefination on Upper form of Workflow's first step then it works fine, whereas if I use it on upper form of workflow's second step or any other step apart from first then it doesn't displayed. Please let me know how can i get the default value on upper form of any step.
Thanks in advance.
Abhishek@I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.
-
Text value is not getting displayed in Query designer !!
Dear experts..,
i have created a new query in query designer using my info provider and then selected one field in default value and then trying to restrict that particular field while selecting the restriction in query designer am getting the exact text value but after generating the report instead of text value , key value is getting displayed....so how can i get text instead of key value??
please help me friends....
i have posted in OSS mesage also...i got a reply like...even i didnt understand his reply too...what he is trying to say?
whether can i get text display or not???
can any one help me in this regard???
SAP Reply----
Hello kumar,
After another analysis I have to inform you about general concept of
"compounded characteristics".
A compounded characteristic bounds two characteristics. The technical
name is generated by both technical names of the two characteristics
combined by two underlines "__".
An individual text is only available for one single combination of both
characteristics.
Example:
=======
Compounded characteristic "Famous family name" is a combination of
characteristic "COUNTRY" & "ETHNIC". Technical name: COUNTRY__ETHNIC
Values for Country: USA, Australia
Values for Ethnic: Asian, Latino
Possible value combinations with individual text:
USA & Asian; text: "Ling"
USA & Latino; text: "Sanchez"
Australia & Asian; text: "Chu"
Australia & Latino; text: "Garcia"
(Keep in mind the individual text only valid for the specific
combination.)
In analogy to the issue that you reported, you want to restrict this
compounded characteristic. In the window where you select the restrictedvalue (called Selector) you'll see on the left hand side all available
combinations of the characters with an individual text.
You select family name "Chu" and drag'n'drop it to the right side.
Actually you can only restrict the right compounded characteristic. In
our example you would restrict on characteristic "ETHNIC" with value
"Asian". (When you switch on technical names this comes more clear). Thetext "Chu" is displayed in the context of Selector because you selected
value combination Australia & Asian. But in the end it's just a
placeholder(!) for any combination of characteristic "ETHNIC" and value
#Asian#; in our example it could be USA & Asian "Ling" or Australia &
Asian "Chu").
By leaving the Selector the individual text is gone because now the
context is lost between the two characteristics. You have just a
restriction on characteristic "ETHNIC" with value "Asian". An individualtext can't be displayed because the compounded characteristic is not
specified for this restriction.
You're right, it is confusing when "loosing" the text of a restriction.
But accoring to the concepts of the compounded characteristics it
is a correct behavior.Hi anandkumar,
I belive this issue can be resolved by changing the Query proprties for the perticular field.
Kindly check the Field proerties in query designer and ensure that Text is enabled ather than Key.
__Field property check up:__Go to query designer->click onn the field-> Right hand side in properties click on display tab-> select Text in drop down menu of Display as tab.
FURTHER CHECK UP: check the master data avaiulability for the perticular info object, if masterdata is not available, do the text data for txt data availability in report level.
Hope this helps you!!
Best Regards,
Maruthi -
Default value don't get displayed for Fetch XML report
Hi All;
i have a date parameter in a fetch XML report
i set its default value as 01/01/2010
when i run this report in SSRS i can see the default value of the date
But when the same report gets displayed on CRM 2013 online - report section the date default value dont get displayed
Any help for this much appreciated
Thanks
Pradnya07Hello Zero-G. _,
>> But I don't get any "Operation". I can't see my failure. - I tested around for the last few days, but I don't have a Clou, what's wrong...
I am afraid that you have mixed the WCF and WCF Data Service, here is a WCF Service example(it works with the Entity Framework while it is not WCF Data Service):
http://www.codeproject.com/Articles/127395/Implementing-a-WCF-Service-with-Entity-Framework, please check it, in your case, you are use this mode and you do not need to create WCF Data Services.
If you want to write a custom method in WCF Data Service, you could refer to this link:
https://msdn.microsoft.com/en-us/library/dd744841(v=vs.110).aspx, as you can see, although if we declare a custom method, it would not show in the web browser, we call it as adding
the method after the based service link directly:
http://localhost:12345/Northwind.svc/GetOrdersByCity
Or call it by using a client project which could detect this method and call it as in this blog:
http://blogs.msdn.com/b/dataaccesstechnologies/archive/2009/12/01/way-to-expose-custom-method-in-an-entity-class-from-wcf-data-service.aspx
Regards,
Fred.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
IT0185 Field value is not getting displayed on the Payslip
Hi Friends,
I have the similar issue of this post as Unable to View the IT0185 Subtype National Ins# (ICNUM) in Payslip.
Little confused with PE51_CheckTab entries and other stuff.
Could anybody please suggest as to how to resolve this?
thanks in advance.I assume that you are referring to a brand new field on the second step that was not on the form of the first step. If this is the case, then you should put the field in a hidden block of the first steps form. Default values and Auto-population from shells/single record BPs only occur of the create step, even if they are not used on that step. As long as you put them on the create step (even in a hidden block) they should initialize.
-
Measurement value is not getting displayed
i wrote the following code for my bdc.i want to check whether my flat file data got uploaded into my internal table.all field values are getting displayed in the output
except measurement(field-meins).plz help
report Z_PP_BDC1
no standard page heading line-size 255.
*REQUEST NO.:DEVK903710
*& Table Declaration
TABLES : IBIPPARMS,RC29P.
*& Types
TYPES : BEGIN OF TY_ITAB,
MATNR TYPE MATNR, "MATERIAL NO
WERKS TYPE WERKS, "PLANT
STLAN TYPE STLAN, "BOM USAGE
DATUV TYPE DATUV, "VALID DATE
BMENG TYPE BDC_FVAL, "BASE QUANTITY
IDNRK TYPE IDNRK, "COMPONENT
MENGE TYPE BDC_FVAL, "QUANTITY
MEINS TYPE MEINS, "UNIT
POSTP TYPE POSTP, "ITEM CATEGORY
END OF TY_ITAB.
TYPES : BEGIN OF TY_ITAB1,
SYTABIX TYPE SY-TABIX,
MATNR TYPE MATNR, "MATERIAL NO
WERKS TYPE WERKS, "PLANT
STLAN TYPE STLAN, "BOM USAGE
DATUV TYPE DATUV, "VALID DATE
BMENG TYPE BDC_FVAL, "BASE QUANTITY
IDNRK TYPE IDNRK, "COMPONENT
MENGE TYPE BDC_FVAL, "QUANTITY
MEINS TYPE MEINS, "UNIT
POSTP TYPE POSTP, "ITEM CATEGORY
MSEG TYPE CHAR128,
END OF TY_ITAB1.
*& Internal Tables Declaration
DATA : IT_ITAB TYPE TABLE OF TY_ITAB WITH HEADER LINE,
IT_BDCDATA TYPE TABLE OF BDCDATA WITH HEADER LINE,
IT_BDCMSGCOLL TYPE TABLE OF BDCMSGCOLL WITH HEADER LINE,
IT1_ITAB TYPE TABLE OF TY_ITAB1 WITH HEADER LINE,
IT_ERROR TYPE TABLE OF TY_ITAB1 WITH HEADER LINE.
*& DATA Declaration
DATA : P_FILE1 TYPE STRING ,"FILE NAME
V_LINES TYPE I,
FNAM(20) TYPE C,
V_MSG TYPE CHAR_132,
V_SUC_CNT TYPE INT2,
TABIX TYPE I,
IDX TYPE C.
*& SELECTION-SCREEN DECLARATION
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS : P_FILE TYPE LOCALFILE OBLIGATORY."FILE NAME
SELECTION-SCREEN END OF BLOCK B1 .
AT-SELECTION-SCREEN DECALRATION *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_FILE.
clear : P_FILE.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
PROGRAM_NAME = SYST-CPROG
DYNPRO_NUMBER = SYST-DYNNR
IMPORTING
FILE_NAME = P_FILE.
IF P_FILE IS NOT INITIAL.
VALIDATE FILE TYPE
PERFORM SUB_VALIDATE_txt_TYPE.
ENDIF.
START-OF-SELECTION
start-of-selection.
perform upload.
perform bdc.
*& Form upload
text
--> p1 text
<-- p2 text
*FORM upload .
clear : P_FILE1.
P_FILE1 = P_FILE.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = P_FILE1
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = IT_ITAB
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_READ_ERROR = 2
NO_BATCH = 3
GUI_REFUSE_FILETRANSFER = 4
INVALID_TYPE = 5
NO_AUTHORITY = 6
UNKNOWN_ERROR = 7
BAD_DATA_FORMAT = 8
HEADER_NOT_ALLOWED = 9
SEPARATOR_NOT_ALLOWED = 10
HEADER_TOO_LONG = 11
UNKNOWN_DP_ERROR = 12
ACCESS_DENIED = 13
DP_OUT_OF_MEMORY = 14
DISK_FULL = 15
DP_TIMEOUT = 16
OTHERS = 17.
IF SY-SUBRC <> 0.
endif.
*LOOP AT IT_ITAB.
*WRITE : / IT_ITAB-MATNR,
IT_ITAB-WERKS,
IT_ITAB-STLAN,
IT_ITAB-DATUV,
IT_ITAB-BMENG,
IT_ITAB-IDNRK,
IT_ITAB-MENGE,
IT_ITAB-MEINS,
IT_ITAB-POSTP.
*ENDLOOP.Hello,
I have not understood the problem....Is this regarding the conversion exit... you can use function modules:
CONVERSION_EXIT_CUNIT_OUTPUT to display the UoM in the appropriate logon language if you have data directly from SAP database.
Best Regards, Murugesh AS -
In eRecruitment - Application wizard F4 Values are not getting displayed.
Hi,
I have created a seperate process template for MBA candidates (external) as per client requirement and in the Vacancy req.when the process template is selected the application wizard is getting displayed ( which has been defined according to new requirement). But in the Application wizard for e.g.:
In Education Questionnaire for MBA candidates: It is not displaying Start date/End date /Country/Region/City ( F4Value to select).It only displays:
Start Date*
End date*
Country*
Region*
City*
The same is getting displayed in Work Exeprience ( I am unable to get the F4 entries - where the candidate can select from the entries displayed)
Is there any role needs to be changed or any other configuration missed by me to get those F4 entries?
Regards,
SelvaHi,
I have solved this issue.
Selva -
Values not getting displayed for members which doesnt have parents
Hi
I created a product dimension with 4 levels .For members which doesnt have parents,data is not getting displayed in JavaClient.
The values for members which doesnt have parents are getting displayed in the view created for the measures which are dimensioned by Product .I mapped the same view in the CWM2 work space ,but value is not getting displayed for members which doesnt have parents ,but values are getting displayed for members which have parents for measures.
Is it a bug , we were able to do it in Express ..
Can anybody help us in doing this.??
Thnx in Advance......Hi,
This assumes that the members which do not have parents are mapped to the top level in the hierarchy. If they are at a level below the top level then they are not part of the hierarchy and therefore would not be displayed. So this sounds like expected behaviour.
Hope this helps
BI Beans PM Team
Oracle -
A keyfigure is not getting displayed in the DSO and query
hi friends,
i have newly developed a DSO with 11 keyfigures and with some 10 characteristics. i created DTP , transformations etc., and i loaded data into it and activated it succesfully.
now when i select display data of this DSO one of my keygure is not getting displayed.
even tht same keyfigure is not appearing in the query too.
but when i check the active table of this dso in SE11 , tht keyfigure is displayed with values.
could anyone help through this issue.Hi
Even I faced such an issue earlier. I could resolve it simply by readjusting the DSO i.e. to delete the keyfigure and add it in the structure once again, before this you have to delete the data in the DSO. Also, if you have a multiprovider on the DSO make sure that the keyfigure concerned is identified.
Let us know if this works for you. Thanks. -
Hi,
The issue is that the values are not getting displayed in lt_return(table which i declared).
Please find the code below.Is there anything to do with POSITION field in DFIES table?When i press F4 the popup is coming but im unable to see any values in it.Please help? When we are not declaring DFIES we are seeing values of HIENM but not in the column of HIENM but HIED(which is the first column of RSHIEDIR).When we are declaring dfies,we are able to see only one column(HIENM) but no values in it.
TYPES: BEGIN OF ty_hrname,
hienm TYPE rshiedir-hienm,
END OF ty_hrname.
data : i_valhrname TYPE TABLE OF ty_hrname ,
lt_dfies TYPE TABLE OF dfies,
lw_dfies TYPE dfies.
SELECT hienm FROM rshiedir INTO CORRESPONDING FIELDS OF TABLE i_valhrname
WHERE objvers EQ 'A' AND iobjnm EQ '0COMP_CODE'.
lw_dfies-dynpfld = 'X'.
lw_dfies-tabname = 'RSHIEDIR'.
lw_dfies-fieldname = 'HIENM'.
APPEND lw_dfies to lt_dfies.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ddic_structure = 'RSHIEDIR'
retfield = 'HIENM'
dynpprog = sy-cprog
dynpnr = sy-dynnr
dynprofield = 'W_TEMPWA-TCTHIENM'
value_org = 'S'
TABLES
value_tab = i_valhrname
field_tab = lt_dfies
return_tab = lt_return
EXCEPTIONS
parameter_error = 1
no_values_found = 2
OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. " sy-subrc
Regards,
K SrinivasHi
Try this link.
[Re: Search Help in ALV Editable Field]
Regards
Hareesh -
Hi,
In my infocube material type for one of the material is not getting displayed.
When I check in the content of the cube for this material all the fileds are getting displayed except material type.
However it is present in the material master data from which it is put into the update rules to populate in the cube.
Its getting displayed for some other materials , so we cant say that mapping is wrong or problem with update rules.
Can some body let me know what could be the reason.
Thanks,
JeetuHi Jeetu,
can you check in your cube if you have for one material, entries with AND entries without the MATL_TYPE? If this is the case then you were loading transactional data before having the corresponding material master data.
You should adapt your scenario:
- first do not use the standard attribute derivation during your URules: performance is very bad.
- implement a start routine filling an internal table with your material and MATL_TYPE for all entries of material in your datapackage.
- implement an update routine on the MATL_TYPE with a READ on this internal table an raise an ABORT = 4 if the MATL_TYPE is initial or the material in not found.
Now to fix your situation you'll have to reload your cube or alternatively just reload your missing MATL_TYPE MATERIAL from your cube itself and selective delete those which are empty.
hope this helps...
Olivier. -
Statistical condition types not getting displayed in invoice
We have configured the tax collected at source (TCS) condition types and make them as statistical in the pricing procedure. Now, the issue is when we are using them the values for these condition types are getting calculated correctly as the total value is correct but in the invoice their individual values are not getting displayed.
In the analysis also we can see that the condition records are found but being statistical condition they should get displayed in the invoice as only the correct total value will not serve the purpose, please help
Thanks & regards
Puneet AgrawalHi
Keep a break-point (hard) in these program lines and debug and see that whether the condition type(KSCHL) related to Taxes is appearing here or not.
If the condition type for taxes is coming then you can print the taxes.
First check the related condition type for Taxes in T685 table and see here in the code.
<b>Reward points for useful Answers</b>
Regards
Anji -
Quantity field not getting displayed
Hi,
I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
Please suggest what can be the possible cause for this.
Regards
Sidharth
Can you pleaseHi,
As far as I understand you display output parameters of BAPI, so check to following things:
1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
Hope it helps.
Victor.
Maybe you are looking for
-
SAP Personas using SSO to connect SAP ECC
Hi, We configured SAP Screen Personas test landscape. When I launch the mainapp page, the system is prompting for user credentials. Then I get "System Selection" screen where the system I have configured (SAP ECC). When I click on system backend, an
-
How do I manually modify a font of text with photo in text?
I was trying to do an example from a photoshop CS3 for dummies book but I wanted to modify the example a bit- here's the q I asked on the author's amazon page: http://www.amazon.com/gp/forum/cd/discussion.html/ref=ntt_mus_ep_cd_tft_tp?ie=UTF8&cdForu
-
I experienced where my macbook pro with retina get overally hot underneath and on the od occassions this sound of air gushing out occures as if it cooling it down, anyone else experienced this? wrong title corrected
-
Upgrading SSD Storage in MacBook Air.
Hello eveybody. Please, I nedd some help. I`ve bought in US a MacBookAir on feb/2013 with a 250 Gb SSD Unit. Nowadays I need to upgrade its storage capacity, but I was informed by an Apple technical assistence here im brazil that this is not possible
-
Hi, I am calling a standard function module with additional option <b>STARTING NEW TASK</b>. After execution of this how i will get the status ? Whether any way can i get the status if i am calling function module with STARTING NEW TASK? Thanks aRs