Sun ONE Studio 4 Update 1 does not allow to deploy a module

I have created CMP entity beans based on a database schema captured using the jdbcodbc driver.Each one with its primary key and correctly validate.
Then I have created a module and added to the module all CMP beans. Then when I attempt to deploy the module I got the following error: Conents are not valid for Sun ONE Application Server and in the log: Validation failed for EntityBeans.XConnectTableBean. Verify that all fields are mapped.
The I went to the SUN ONE AS entity properties within the module. I changed the defualt value of Mapped Schema to the correct schema, but when I tryed to change the Mapped Primary Table to the correct table the OK button was grayed out with the following status message: Table CTPTable does not have a primary key. This is of course not true.
Did I something wrong or this is a bug on Sun ONE Studio 4 Update 1?
Is there any work around?
Thanks in Advance

Yes,
It was a known bug and fixed with the newer realeses. Try to use the capture schema utility of the appserver (Install directory>/bin/capture-schema).

Similar Messages

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

How to open multiple artboard illustrator file in illustrator. Coz, whenever we open a multiple artboard file, illustrator provide an option to chose one artboard but does not allow opening of all artboards. Somebody may explain it

Doug's got it right. It sounds like you are trying to open a later version file in an earlier version. This will always be handled as opening the PDF portion of the file. Try Googling AI_openMultiPagePDF for a script to open these or Resave from the newer version to the older.

The adobe version 10 update does not allow use of tabs

I had tabs working ok on my laptop, then an adobe update to ver 10 has stopped the tabs feature working. I get all sorts of notices about this being embarrissing to Firefox and analysing the problem. But nothing is offered. Everything locks up when I try to open tabs. Seems trawling q and a that this is not a prob unique to me. Do Firefox actually moniter this feedback and offer some hope of resolution?

Jeaninefromca wrote:
Apple does not allow use of Adobe Flash with the IPad. Is it all right to use Bridgebaseonline with a Mac that is synched with an IPad?
Flash is not available for the iPad. If Bridge Base Online requires Flash, there's nothing you can do on the iPad, unless Bridge Base Online has an app in the iTunes App Store.
You may want to try an alternate browser like Skyfire or Puffin. No guarantees.
I have not been able to synch Ical and Iphoto with my IPad. I've been to the Genius bar 5 times and on the phone twice to try to resolve this problem.
iBook, Mac OS X (10.5.2), I cannot synch my IPad with IBook
This is a separate issue than what you stated in the subject. Syncing recent iPhones and iPads that have iOS5 on them require iTunes 10.5, which also requires OSX 10.5.8 on your Mac. Your profile says you have 10.5.2. If that is correct, you need to update to 10.5.8, then update iTunes to 10.5, if you haven't already done so.

Problem with SUN ONE STUDIO Update 4

Hi,
I created a simple entity bean with finder methods and business methods.
But when I am trying to test the entity bean by generating the New EJB Client, and at the time executing the EJB client test client the following error as occured.
[b][b]Deploying... EAR Unable to deploy theC:/developer/JavaProject/test/test.earApplication
Deployment Error -- Error while running ejbc -- Fatal Error from EJB Compiler -- -- Error while processing CMP beans.
Please help me
Thank you

Hi ,
To know the reasons for deployment failure , you
could run your application using the Sun One verifier tool. Right click your application node and select Sun one verifier under the tools category.
Please post the results of the verifier tool in case you are not able to resolve the problem.
-Amol

The new update does not allow me to start a new tab in the browser

After updating Firefox for Mac, Command-T, the prompt in the File menu, nor the + by the open tab will start a new tab.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions and some Preferences.''
*Open websites will not be saved in Firefox versions lower than 25.
To Reset Firefox do the following:
'''For Firefox versions previous to 29.0:'''
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox"[[Image:Button reset]] button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
'''For Firefox 29.0 and above:'''
#Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
Now, a new tab containing your troubleshooting information should open.
#At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Flash player update does not allow me to use Kuler

Why can't I use kuler with flash player 10.3.183.43? This is the latest Flash Player I can install. Is there a way around it? I use Kuler all the time, and now I can't because of this problem! Please help!
Thanks!

Hi Janieminman,
What browser are you using? and version of the browser? Also are you on a Windows or Mac computer?
-Dave

HT5622 Apple ID profile update does not allow changing area or country codes

Is there any way to do this? Or to report the problem to a webmaster? (I presume the country code for US is 1.)
It will only accept putting the are code in the country code box and leaving area code box empty. Any other change attempt just produces "Please specify a vaild phone number."

Solved with assistance from iTunes support. The main problem was that you cannot use an e-mail address which is associated with your existing account. So the answer is to set set up a new e-mail address with your Internet Service provider. Next step is to log into iTunes using your existing appleID (which in my case was a non e-mail address as mentioned in my question) and then modify your itunes id and e-mail account, both to the new e-mail address. I tried it and it worked. All downloaded history such as itunes music and apps that I have downloaded onto my devices over time has been retained. Furthermore I can now use the "Find my iPhone app" to find both my iphone and iPad. Likewise will be able to use this revised appleid to access iCloud once available and synch my apps etc., Very pleased with iTunes Support's prompt response and remedy.

Problem installing Sun ONE Studio 4 update 1, Community Edition

I recently downloaded the Sun ONE Studio 4 update 1, Community Edition and tried to install it. At one point it searches for a valid JAVA 2 SDK. This seems to go on forever. I quit after 5 hours of waiting. I already have Java 2 standard edition v1.4.1 installed. Can someone please help?

Well thanks Chuck!
With a bit of messing around and a LOT of patience I finally installed Sun ONE Studio update 1 on my laptop pc, running Windows ME.
The trick was (I think) to apply both of the above fixes, but also a couple of things that was not quite as evident.
1 - Do NOT install the SDK in "C:\Program Files\" or any directory path that contains spaces in the name! Apparently that causes problems, and is noted in one of the Knowledge Base articles.
2- When making the file noted in the Knowledge Base:
( http://forte.sun.com/cgi-bin/WebX?[email protected]@.ee815f4 )
- It says: Contents of this new file should be:.
jh=<jdk Home Path> (for example, jh=c:\j2sdk1.4.0_01)
Well it does NOT mention that there should be 2 lines in that file!
Make sure you include a carriage return and a second "blank" line!
OK, that's it. GO ahead & loose yourself in the IDE.
I hope this does not cause undue traffic in the forums but what the heck...
-- HSC --

HT1338 just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

just bought a new I-Mac. At start up several updates were needed. The I-movie one stopped and shows an ERROR HAS Occurred. Howevr it does not allow me to update it again. In my purchases it shows as Installed with Error. What should I do?

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select "/var/log/install.log" from the file list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, start over and note the time. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Using JMF API with Sun One Studio v4 update 1 (community ed.)

Having great difficulty trying to utilise the JMF API I've just downloaded with Sun One Studio v4, update 1 (community edition).
After installing the API, I tried copying the the .jar files under the lib folder of JMF to the lib folder of sun one studio.
Although admittedly a novice in the field of adding API's I have attempted to add the .jar files into the libary of recognised modules but made no progress.
The problem is that although JMF API is installed, Sun One Studio does not seem to be aware of this and so does not recognise any associated libraries e.g. java.media or JMFApplet.
I would appreciate advice from anyone who knows how to configure Sun One Studio to utilise the JMF API.
Mark

All right, I think I may have solved it. After mounting jmf.jar I needed to update the parser database. All the libraries seem to be there.
Can someone clarify though, the trial program i'm using makes reference to: java.media
I don't have this module. I do instead have javax.media which I believe includes all the methods of the java version. Am I right or am I missing this crucial module??

Cannot preview SSRS report in Visual Studio 2012 - assembly does not allow partially trusted callers

Hi,
I have an SSRS report that works fine in Visual Studio 2008 BIDS. This report references a .Net assembly namely:
System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a
I use this assembly in some simple Code functions in the report. e.g.
System.Web.HttpUtility.UrlEncode(inURL).ToString
I have converted the SSRS project to 2012 and am trying to preview the report. However, I get an error relating to: "That assembly does not allow partially trusted callers". If i deploy the rdl to my local SSRS it renders fine, but
how do I fix Visual Studio to preview the report without error? This is highly annoying.
My Visual Studio version is:
Microsoft Visual Studio Professional 2012
Version 11.0.61030.00 Update 4
Microsoft .NET Framework
Version 4.5.51641
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 11.0.3402.0
Any help is appreciated on this one.
Regards,
MrHH

Hi MrHappyHead,
According to your description, you used custom assembly in the report, when you run the report in Visual Studio 2008, the report works fine. When you run the report in Visual Studio 2012, the error message occurred: "That assembly does not allow partially
trusted callers". But the report works fine after you deployed it to report manager.
Only applications that are fully trusted by the runtime code access security system are allowed to access a shared managed code assembly that is not explicitly marked with the System.Security.AllowPartiallyTrustedCallers attribute. A partially trusted assembly
(one that is registered in SQL Server with the SAFE or EXTERNAL_ACCESS permission set) that attempts to access a strong-name signed assembly without this attribute causes a System.Security.SecurityException to be thrown. To troubleshoot the problem, please
refer to the following steps:
Add namespace system.security to AssemblyInfo.cs file
Add [assembly:allowpartiallytrustedcaller] to the file.
Set trust level to "Full" in web.config file
For more information, please refer to the following document:
http://support.microsoft.com/kb/2869522/en-us
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu

Sun One Studio 5 Update 1 + Sun One Application Server 8

I haven't been able to setup Sun One Studio 5 to work with Sun One Application Server 8. I already tried with the plugin for netbeans 3.6, but it fails on dependencies. The plugin and dependencies can not be found on the update center.
I'd appreciate if anyone can tell me how to setup the studio to work with the AS succesfully

Studio 5 does not support Sun Java System App Server 8 (and most likely never will).
Try the NB3.6/AS8 bundle: http://java.sun.com/j2ee/1.4/download.html#nb
I'm not sure I understand what you mean by dependencies.
-Alexis

JATO 2.0 Licensing for Sun ONE Studio 4 Update 1 EE

I have a serial number for Sun ONE Studio 4 EE which I'm also able to use
for Sun ONE Studio 4 Update 1 EE. I downloaded JATO 2.0 as offered in the
Studio Update Center. It asked for a serial number so I tried my Studio
serial number but it didn't work. Should it have? Are you giving away JATO
with the EE version of Studio?
- Jim
James Watkin
The Anderson School at UCLA
james.watkin@a...
Voice: 1-310-825-5030
Fax: 1-310-825-4835

In order to compile from the IDE, you need a few things
1. If the class is in a jar you must mount the jar in the filesystem -- that is, the jar file must be a top node (not under a node) in the Filesystems window. If this is not the case, use File > Mount Filesystem > Archive Files.
2. If the class is not in a jar, mount the directory above the package root. For example, if you have c:\myWork\src\javax.microedition.lcdui.game then mount c:\myWork\src
3. You have to either have an appropriate import statement or use the fully qualified class name.
Import statement:
import javax.microedition.lcdui.game.*;
or
javax.microedition.lcdui.game.someName x;
More information about package problems can be found at http://swforum.sun.com/jive/thread.jspa?forumID=78&threadID=22820
It has a web-tier bent but some of this info applies to Java apps.

Fail to run my first Servlet with Sun ONE Studio 4 Update 1 (+ bi Tomcat)

Hello !
I failed to run my first Servlet with Sun ONE Studio 4 update 1 ( with built in Tomcat)
I think that I followed most of the online instructions,
so I successfully run a JSP file,
but I failed with my first servlet:
The error message is:
"Standard Wrapper[:MyServlet]: Marking servlet MyServlet as unavailable
javax.servlet.ServletException: Wrapper cannot find servlet class com.hemmerling.myservlet.MyServlet
or a class it depends on
So please don�t ask me for the code of the servlett ( simply taken from a book),
but tell me why the one-and-only servlett was not found. what might I have done wrong, if I did everything I did to run the JSP file, too ?
Of couse I copied the file into the "Classes" directory of the Webmodule ( WEB-INF ) and "processed" it, so that I was able to execute it.
Any suggestions ?
Tia
Sincerely
Rolf

Tough to say, but try:
1. Put the servlet in a package. If you're using the default package (class file in WEB-INF/classes directory, then Tomcat may not find it.
2. Check out web.xml to ensure the <servlet> and <servlet-mapping> entries are correct.
3. Make the servlet as simple as possible so you're sure that it is the servlet itself that cannot be found and not some other class that it uses.
Good Luck

Updated my phone, now e-mail will not send because server does not allow relaying

Updated iphone 3GS to iOS 5, now my company e-mail will not send "because server does not allow relaying". I'm just an employee, not an IT type - have no idea what this means and I'm very frustrated. Also infuriated with Apple because THEIR update caused this to happen, yet I have to PAY for their support because I have an older iPhone. Someone please help.

razmee209, thanks for your reply. After signing up for the community, I saw that I wasn't the only one. However, I think I've solved it by looking over the comments in reply to others with this problem.
First, I think the iOS5 update may have made the phone default to IMAP setting. I noticed when I deleted my account and re-set it up that there is a large button at the top for either IMAP or POP. It is already defaulted to IMAP, but my account must be POP. So this is the first thing to check when you're setting up your account.
Second, I noted some other comments about needing to supply a username and password to the outgoing server even though it says optional. I included those, but got a message that it wasn't recognized (or something like that) and did I want to continue anyway. I told it to continue. After a few seconds, it verified my account, and now everything works.
Hope this helps others having this problem.

Sun ONE Studio 4 Update 1 does not allow to deploy a module

Similar Messages

Maybe you are looking for