Sun one web server 6.0 admin instance

Hi,
After installing Sun one web server 6.0 sp6 on HP-UX, the admin server instance seems to work fine (i.e. I can bring up the admin web page). However, I cannot bring up web page from other web server instance. it gives me this error "the page cannot be displayed". Am I supposed to get a default webpage from this web server? How can I tell if this web server is working properly? Please help.
thanks,
Paul

Hi,
thanks for your prompt reply Joe. No, I don't get anything in the access log but I got some error messages in error log. It looks like the error indicates the web server crashed. Please help. I've been struggling to get this web server running and it's going nowhere.
"[24/Dec/2003:08:40:19] catastrophe ( 8291): Server crash detected (signal SIGBUS)
[24/Dec/2003:08:40:19] info ( 8291): Crash occurred in NSAPI SAF NSServletNameTrans
[24/Dec/2003:08:40:26] failure ( 8290): Child process admin thread is shutting down
[24/Dec/2003:08:40:26] info ( 8326): Installing a new configuration
[24/Dec/2003:08:40:26] info ( 8326): [LS ls1] http://hpusam20, port 1040 ready to accept requests
[24/Dec/2003:08:40:26] info ( 8326): A new configuration was successfully installed
[24/Dec/2003:08:40:26] warning ( 8326): Port directive ignored
[24/Dec/2003:08:40:26] warning ( 8326): The server configuration may require more file descriptors than the operating system provides. If you encounter PR_PROC_DESC_TABLE_FULL_ERROR errors, you may wish to increase the operating system hard file descriptor limit from 1024 to 5763 (see your operating system documentation) or decrease one or more of the following settings: MaxFiles in nsfc.conf and ConnQueueSize, RqThrottle, and MaxKeepAliveConnections in magnus.conf."

Similar Messages

Sun One Web Server instance not starting

I have installed Sun One Web server 6.1. The administrator server is starting up. However, the instance of the web server through which I want to serve the web pages is not starting. Altough, there are no error messages that are shown when I am starting the server. Please help.

I would check the logs directory for a PID file. It could be that there is a bogus pid file and when it tries to start you will get no error message. If there is a PID file delete it and try again.

How to deploy .war on Sun ONE Web Server 6.0?

Hi Everyone
I have been trying unsuccessfully to deploy a .war application using Sun One Web Server 6.0.
I only installed Sun ONE for the first time this morning and don't know much about web servers - yet.
I deployed the web application from the web-based admin console. I'm not sure exactly what to put in the URI field. I just deployed it on the only existing "virtual server". I don't really know anything about virtual servers.
Also: I installed with the defaults, what port should I try to access my app from?
The documentation doesn't help much - so please don't give me a URL to some docs i won't understand.
I miss the autodeploy offered by other tools. I have deployed this app before on other servers.
thanks in advance

The URI is the "virtual path" at which the web application is accessible. For example, if you deploy a web application at the URI /foo, you would access the web application by requesting http://server.example.com:port/foo/.
Unfortunately, I can't tell you what port your Web Server instance is listening on as that's configured at install time. If you don't remember the port you selected, check the server.xml configuration file. The port is recorded in that file.

IPlanet migration failure for Sun One Web server 6.1SP6

Recently we downloaded the Sun One Web server 6.1SP6 and we are having problem trying to upgrade our current version. We have been able to install the package and get the admin console running but we can not migrate the current instances across to the new version. We can successfully choose an instance to migrate however once we click the migrate button, absolutely nothing happens in the browser and nothing can be seen in any error logs and truss indicates a read of a pipe going nowhere, after which the cgi stub terminates.
We are migrating from
iPlanet-WebServer-Enterprise/6.0SP5 B10/31/2002 16:22
to
CORE1116: Sun ONE Web Server 6.1SP6 B05/07/2006 12:33

well, it is good that you have considered to upgrade considering 6.0 Sp5 has been EOL'ed for some time now.
here is the url that describes migrating to 6.1 from 6.0
http://docs.sfbay/app/docs/doc/819-6514/6n8h9dr61?a=view
now, if you are still having issues with migration using GUI, you can provide us the admin server error logs or call Sun tech support (if you have support contract) to help you with this.

Error when starting Sun ONE Web Server 6.1SP4 after successful installation

I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
failure: CORE3170: Configuration initialization failed: Error running init funct
ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
(ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
libares3.so: symbol __res_state: referenced symbol not found)
I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
Thanks!!!!!

I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

Deployement of package in sun one web server 6.1

I m using Sun One Web Server 6.1 but i m facing one problem in deploying my application. I deployed the application but the packages i have written are not found.
How to add packages to the application. Can anybody tell me.
Thanks.

Can you tell us how you deployed the application on WS 6.1? And can you send your server.xml? What is the problem you are getting? Can you send error logs of the server instance.

Problem with maxprocs 1 on Sun One Web server 6.1

I am using sun one web server on Unix with maxprocs set to 3.
This means that there are 3 jvms running my application under 1 instance. However I have certain components like an application cache that I would like to share between these 3 processes.
Additionally is there a way to configure the server so that requests from 1 session are served by 1 process only.
I am really stuck here. Have searched in all the documentation, but in vain. Would really help if some one of the Sun Developers could answer this.
Thanks
Chetan

Elving,
It is great to hear that there is no predefined limit on number of sessions but if that's the case why the webserver always starts with 1000 allowed by default. Are there any potential performance reasons behind it?
I have your link open in my browser for a few days now as a reference because I am experimenting with different Session Managers. I am trying to find a solution for BheegaChicken to be able to accomodate several thousand simultaneous sessions for his application.
We use V6.0SP2 and SP6 and for BheegaChicken's app specifically V6.1SP2...
I have spent some time in the past looking for the answers how to handle higher then 1000 sessions capacity on one instance and that was even before V6.1 was out. I have found the following reco that talks about optimal performance for sites using threads:
http://docs.sun.com/source/816-5690-10/perf6.htm#17580
*** start qoute
Multi-Process Mode
You can configure the server to handle requests using multiple processes with multiple threads in each process. This flexibility provides optimal performance for sites using threads, and also provides backward compatibility to sites running legacy applications that are not ready to run in a threaded environment. Because applications on Windows NT generally already take advantage of multi-thread considerations, this feature applies to Unix/Linux platforms.
The advantage of multiple processes is that legacy applications that are not thread-aware or thread safe can be run more effectively in iPlanet Web Server. However, because all the Netscape/iPlanet extensions are built to support a single-process threaded environment, they may not run in the multi-process mode, and the Search plug-ins will fail on startup if the server is in multi-process mode.
In the multi-process mode, the server spawns multiple server processes at startup. Each process contains one or more threads (depending on the configuration) which receive incoming requests. Since each process is completely independent, each one has its own copies of global variables, caches, and other resources. Using multiple processes requires more resources from your system. Also, if you try to install an application which requires shared state, it has to synchronize that state across multiple processes. NSAPI provides no helper functions for implementing cross-process synchronization.
If you are not running any NSAPI in your server, you should use the default settings: one process and many threads. If you are running an application which is not scalable in a threaded environment, you should use a few processes and many threads, for example, 4 or 8 processes and 128 or 512 threads per process.
MaxProcs (Unix/Linux)
Use this directive to set your Unix/Linux server in multi-process mode, which may allow for higher scalability on multi-processor machines. If you set the value to less than 1, it will be ignored and the default value of 1 will be used.
Tuning
You can set the value for MaxProcs by:
Editing the MaxProcs parameter in magnus.conf
Setting or changing the MaxProcs value in the Magnus Editor of the Server Manager
Note You will receive duplicate startup messages when running your server in MaxProcs mode.
*** end quote
If it is not relevant anymore please explane.
I am still interested to understand which of the SessionManagers is recommended by Sun to have optimal performance for sites with high number of sessions and using threads. It is not really obvious from http://docs.sun.com/source/817-6251/pwasessn.html. On top of this that's documented just for V6.1. What about V6.0?
Thank you very much for your cooperation!
Sasha aka ttalex

Sun One Web Server 6.0 Service Pack 5

I installed Windows 2000 SP3, Coldfusion MX Updater 1, and Sun One Web Server 6.0 Service Pack 5. In 2 separate instances I had the Sun One Web Server Stop serving all html pages immediately after I set automatic access log rotation in the web server administrator. I had the access log rotate every 1440 minutes at 12:00 AM. Although the web server instance appeared to be started, no html pages could be served. In addition, I was not able to undo the changes through the web server administrator. I finally tried to edit the magnus.conf file to remove the new log settings. However, nothing could bring back the web server into a working state. Web Server restarts and entire server reboots did not resolve this issue. I was wondering if anybody else has seen this issue and if so, how did you resolve it? I was forced to completely uninstall the web server and reinstall it. This makes me hesitant to put Sun One Web Server 6.0 SP5 into production. Any other thoughts or experiences with SP5 in a Windows/ColdfusionMX environment? Thanks for any help?

Since removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings?

Sun One Web Server Start Up Error

I have added filters in my application. I get the below error when I try to restart my application from Sun One Web Server,
info: CORE3282: stdout: PARSE error at line 6 column 10
info: CORE3282: stdout: org.xml.sax.SAXParseException: Element type "filter" must be declared.
failure: ContextConfig[] WEB3524: Parse error in application web.xml
org.xml.sax.SAXParseException: Element type "filter" must be declared.
at org.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1016)
at org.apache.xerces.validators.common.XMLValidator.reportRecoverableXMLError(XMLValidator.java:1252)
at org.apache.xerces.validators.common.XMLValidator.validateElementAndAttributes(XMLValidator.java:2721)
at org.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:823)
at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1222)
at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:380)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:908)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:314)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:89)
at org.apache.catalina.util.xml.XmlMapper.readXml(XmlMapper.java:275)
at org.apache.catalina.startup.ContextConfig.applicationConfig(ContextConfig.java:312)
at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:1005)
at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:257)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:155)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3702)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: ContextConfig[]: WEB3525: Occurred at line 6 column 10
failure: ContextConfig[]: WEB3541: Marking this application unavailable due to previous error(s)
failure: WebModule[]: WEB2705: Context startup failed due to previous errors
failure: WebModule[]: WEB2720: Error initializing naming context for context
javax.naming.NamingException: WEB3880: Unknown context name : StandardEngine[null].StandardHost[https-sitarmor84].StandardContext[]
at org.apache.naming.ContextBindings.bindThread(ContextBindings.java:207)
at org.apache.catalina.core.StandardContext.bindThread(StandardContext.java:4123)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:3811)
at com.iplanet.ias.web.WebModule.stop(WebModule.java:329)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3782)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
Please help.

Which version of Sun web server are you using? Is it 6.1, 7.0 or 7.0 Update2.
6.1 supports Servlet 2.3 spec. 7.0 supports Servlet 2.4 spec and 7.0 Update 1 and 2 support Servlet 2.5.
Servlet 2.3 is DTD based and Servlet 2.4 onwards are schema based.
The DTD or schema will be right after XML prolog in web.xml.
You can use one of the following:
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4">
I am sure your web.xml is not correctly written for the DTD/schema used.
If you take care of that I am sure th problem will go away.
If not, let us know if your webapp's WEB-INF/lib has xerces.jar.

Error message upgrading Sun One Web Server

We currently use Sun One Web Server SP 4. I have a RSA Cleartrust Agent to install that specifies SP 5. I downloaded SP 7. When I try to install it I receive the following message - "A previous release of the Web Server has been detected in the server root. Please select a different server root." I tried stoppping all the services, then installing, same result. The documentation says to run the install, it would detect the previous version and install. Do I have to uninstall the previous version? I do not want to do that. Thanks in advance.
Jim

admin.inf
[General]
Name=Administration Services
Components=admin,admin-client
Checked=TRUE
Description=Server Administration Services used by system administrators to manage all iPlanet Servers.
[admin]
DefaultAcceptLanguage=en
Vendor=Sun | Netscape Alliance
Name=iPlanet Administration Server
NickName=admin
Description=Provides services to other server products.
Dependencies=base/5.1
Version=5.1
Revision=
Compatible=4.0
Security=domestic
BuildNumber=2002.158.2342
Registration=FALSE
Checked=TRUE
IsAdmin=TRUE
UseLDAP=TRUE
BackupFiles=/admin-serv/config/adm.conf
Mandatory=FALSE
#install files for admin
System32Archive=
Archive=admin.z
#plugin dll section
PlugIn=insadm.dll
ReadInf=ADM_ReadComponentInf
PreInstall=ADM_PreInstall
AskOptions=ADM_AskOptions
GetSummary=ADM_GetSummary
WriteGlobalCache=ADM_WriteGlobalCache
WriteLocalCache=ADM_WriteLocalCache
ReadGlobalCache=ADM_ReadGlobalCache
ReadLocalCache=ADM_ReadLocalCache
PostInstall=ADM_PostInstall
PostUnInstall=ADM_PostUnInstall
PreUnInstall=ADM_PreUnInstall
[admin-client]
Dependencies=base-client/5.1
Name=Management Console
Description=Used by system administrators to manage other server products.
Version=5.1
Compatible=4.0
BuildNumber=2002.158.2342
IsMCC=TRUE
Checked=TRUE
Mandatory=FALSE
Security=domestic
#install files admin-client component
Archive=console.z
#plugin dll section
PlugIn=insadm.dll
PreInstall=CON_PreInstall
PostInstall=CON_PostInstall
PostUnInstall=CON_PostUnInstall
PreUnInstall=CON_PreUnInstall
WebServer.inf
[General]
Name=iPlanet Web Server, Enterprise Edition
Plugin=WebServer\WebServer.dll
Description=iPlanet Web Server, Enterprise Edition
Checked=True
Components=NESCore,JRE,Java,Search,SNMP,I18N,CleanUp
[NESCore]
Vendor=Sun Netscape Alliance
Name=Server Core
Description=iPlanet Web Server Core
Nickname=nescore
Version=6.0
BuildNumber=2
Compatible=4.0
Dependencies=svrcore/4.2
DefaultAcceptLanguage=en
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=TRUE
IsAdmin=FALSE
UseLdap=FALSE
SourcePath=WebServer
Archive=nescore.zip
System32Archive=nescore32.zip
Plugin=WebServer\WebServer.dll
PreInstall=SvrCore_PreInstall
AskOptions=SvrCore_AskOptions
WriteGlobalCache=SvrCore_ReadGlobalCache
ReadGlobalCache=SvrCore_ReadGlobalCache
ReadLocalCache=SvrCore_ReadLocalCache
WriteLocalCache=SvrCore_WriteLocalCache
GetSummary=SvrCore_GetSummary
PostInstall=SvrCore_PostInstall
PostUnInstall=SvrCore_PostUninstall
[JRE]
Name=Java Runtime Environment
Description=Java Runtime Environment
Nickname=JRE
Version=1.1
BuildNumber=2
Compatible=1.1
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=True
SourcePath=WebServer
Archive=jre.zip
PlugIn=WebServer\WebServer.dll
PreInstall=JVM_PreInstall
AskOptions=JVM_AskOptions
GetSummary=JVM_GetSummary
PostInstall=JVM_PostInstall
[Java]
Name=Java and Servlets
Description=iPlanet Web Server Java and Servlets Support
Nickname=java
Version=6.0
BuildNumber=2
Compatible=4.0
Expires=0
Registration=FALSE
Security=domestic
Checked=TRUE
Mandatory=True
SourcePath=WebServer
Archive=java.zip
PlugIn=WebServer\WebServer.dll
PreInstall=Java_PreInstall
GetSummary=Java_GetSummary
WriteLocalCache=Java_WriteLocalCache
ReadLocalCache=Java_ReadLocalCache
PostInstall=Java_PostInstall
[Search]
Name=Search and Indexing
Description=iPlanet Web Server Search and Indexing Support
Nickname=search
Version=6.0
BuildNumber=1
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=False
SourcePath=WebServer
Archive=search.zip,searchdata.zip
PlugIn=WebServer\WebServer.dll
PreInstall=WebPub_PreInstall
WriteLocalCache=WebPub_WriteLocalCache
PostInstall=WebPub_PostInstall
[SNMP]
Name=SNMP
Description=iPlanet Web Server SNMP Support
Nickname=snmp
Version=6.0
BuildNumber=1
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=False
SourcePath=WebServer
Archive=snmp.zip
PlugIn=WebServer\WebServer.dll
PreInstall=SNMP_PreInstall
PostInstall=SNMP_PostInstall
[I18N]
Nickname=i18n
Name=I18N Support
Version=6.0
Compatible=4.0
Expires=0
Checked=True
Mandatory=True
Visible=False
SourcePath=WebServer
Archive=i18n-core.zip
UseLDAP=False
Description=iPlanet Web Server Internationalization Support
Registration=FALSE
Plugin=WebServer\WebServer.dll
PreInstall=I18N_PreInstall
AskOptions=I18N_AskOptions
WriteLocalCache=I18N_WriteLocalCache
GetSummary=I18N_GetSummary
PostInstall=I18N_PostInstall
defLang=en,ja
en=�p��
ja=��{��
[CleanUp]
Name=Upgrade Files
Description=iPlanet Web Server Upgrade Files
Nickname=cleanup
Version=6.0
Compatible=4.0
Expires=0
Registration=False
Security=domestic
Checked=True
Mandatory=True
Visible=False
SourcePath=WebServer
Archive=nescore.zip
PlugIn=WebServer\WebServer.dll
PreInstall=Cleanup_PreInstall
AskOptions=Cleanup_AskOptions
GetSummary=Cleanup_GetSummary
WriteLocalCache=Cleanup_WriteLocalCache
PostInstall=Cleanup_PostInstall

Sun one web server 6.0 sp9. Crash occurred in function JVM_NewArray or JVM_

We have a web page with 2 frame set (fa, and fb)
fb has a table with a cell containing div of another table xx.
We face the case where the result in the table xx is not completely displayed due to server crash.
Each time this page is serviced the server crash with the following exception in server was shown from the errors log:
Server crash detected (signal SIGBUS)
Crash occurred in function JVM_FillInStackTrace from module /usr/j2se/jre/lib/sparc/client/libjvm.so
Occasionally the server crash with the following exception:
Server crash detected (signal SIGSEGV)
Crash occurred in function JVM_NewArray from module /usr/j2se/jre/lib/sparc/client/libjvm.so
We were not able to simulate this problem in another instance in �dev� box.
We were also not able to simulate this problem in another instance in same �final� box.
The following was googled for JVM_NewArray :
bug id : 4839641 <http://developer.java.sun.com/developer/bugParade/bugs/4839641.html>
bug id : 4720694 <http://developer.java.sun.com/developer/bugParade/bugs/4720694.html>
The web service is in �final� box using the following:
- Sun one web server 6.0 sp9.
-SunFire 880
-OS: Solaris 9
- Using the Java HotSpot(TM) Client VM v1.4.1_01a from Sun Microsystems Inc.
-JSP
-Java
Would this problem we are facing be a sunone server issue or JVM issue?
Or would there be other issues?

It sure sounds like a JVM bug. I think you should try
using either a) the JVM shipped with Web Server 6.0
SPx (as this is the JVM version that's received the
most testing with Web Server 6.0 SPx) or b) the
latest 1.4-series JVM (as this will include bug fixes
made since 1.4.1_01a).Thanks for the prompt reply.
Would have to upgrade the JVM then.
Will get back again if the upgrade of the JVM solves this issue.

Sun one web server 6.0 sp9. Crash occurred in function JVM_NewArray

We have a web page with 2 frame set (fa, and fb)
fb has a table with a cell containing div of another table xx.
We face the case where the result in the table xx is not completely displayed due to server crash.
Each time this page is serviced the server crash with the following exception in server was shown from the errors log:
Server crash detected (signal SIGBUS)
Crash occurred in function JVM_FillInStackTrace from module /usr/j2se/jre/lib/sparc/client/libjvm.so
Occasionally the server crash with the following exception:
Server crash detected (signal SIGSEGV)
Crash occurred in function JVM_NewArray from module /usr/j2se/jre/lib/sparc/client/libjvm.so
We were not able to simulate this problem in another instance in �dev� box.
We were also not able to simulate this problem in another instance in same �final� box.
The following was googled for JVM_NewArray :
bug id : 4839641 <http://developer.java.sun.com/developer/bugParade/bugs/4839641.html>
bug id : 4720694 <http://developer.java.sun.com/developer/bugParade/bugs/4720694.html>
The web service is in �final� box using the following:
- Sun one web server 6.0 sp9.
-SunFire 880
-OS: Solaris 9
- Using the Java HotSpot(TM) Client VM v1.4.1_01a from Sun Microsystems Inc.
-JSP
-Java
Would this problem we are facing be a sunone server issue or JVM issue?
Or would there be other issues?

It sure sounds like a JVM bug. I think you should try
using either a) the JVM shipped with Web Server 6.0
SPx (as this is the JVM version that's received the
most testing with Web Server 6.0 SPx) or b) the
latest 1.4-series JVM (as this will include bug fixes
made since 1.4.1_01a).Thanks for the prompt reply.
Would have to upgrade the JVM then.
Will get back again if the upgrade of the JVM solves this issue.

Sun One web server 6.0 Authentication

Does anyone know if it is possible to use form based authentication under Sun One Web Server 6.0, that checks the user authentication on a proprietary API. I need to use a JAVA library to authenticate users and i would like to use it under the form based authentication method inside the web server. Is it possible to write a plug-in for web server authentication mechanism?
Thank you

I have almost identical problem (topic �iPlanet 6.0 stops responding�). Since than I made some serious testing and found out that NSAPI does not produce problem. There are two types of delays: the shortest last from 10 to 20 seconds and usually there is �Error accepting connection (The semaphore timeout period has expired.� message in error log. The longest sometimes last more than 10 minutes.
This is short cut from my response time log (in miliseconds):
10:30:18 Response:    15
10:30:28 Response:    32
10:30:38 Response:    47
10:30:48 Response:    31
10:31:06 Response: 8265
10:31:17 Response:   188
10:31:27 Response:    31
10:31:37 Response:    16
10:31:47 Response:    16
10:31:57 Response:    31
10:32:07 Response:    32
10:32:17 Response:    31
10:32:37 Response: 10578
10:32:47 Response:    31
10:32:57 Response:    31
10:33:07 Response:    32
10:33:17 Response:    47
10:33:27 Response:    31
10:33:38 Response:   266
10:33:48 Response:    62
10:33:58 Response:    31
10:34:08 Response:    47
10:34:18 Response:    47
10:34:28 Response:    31
10:34:49 Response: 11047
10:34:59 Response:    31
10:35:10 Response:    93
10:35:20 Response:    32
10:35:30 Response:    46
10:35:40 Response:    32
10:35:50 Response:    47
10:36:00 Response:    46
10:36:10 Response:    32
10:36:20 Response:    62
10:36:30 Response:    47
10:36:40 Response:    31
10:36:50 Response:   391
10:37:01 Response:   297and Connection statistics from Admin web at delay
Total Number Of Connections: 31644
Maximum Number Of Queued Connections: 4096
Peak Number Of Queued Connections: 285
Current Number Of Queued Connections: 285
Number Of Processes: 1 Configuration is Sun One Web Server 6.0.6, Win2K Advanced Server with SP4, Single Processor Machine (Compaq DL360).

While starting sun one web server error message

i have installed sun one web server 6.1,then i tried to start it from start up menu icon "start server administration server".the command prompt just displays and goes off.then i tried to start it from command prompt by giving path
"C:\Sun\WebServer6.1\https-pcname.com>startsvr".
error comes like this
C:\Sun\WebServer6.1\https-pcname.com>net start https-pcname.com Access is denied
can any one help me to solve this .

You most probably don't have admin priviledges required to start a service on this Windows machine.

How do I configure a Sun One Web Server 6.1 to run JSP pages

I have a Sun One Web server version 6.1 running on Solaris 10.
The web server is not configured to run JSP pages. When I try and run a JSP page, I get an HTTP 405 error.
Can somebody please point me to the configuration directions, including changes to the obj.conf, magnus,.conf, etc.
Thanks

Web Container is enabled by default.
Here are my config files
$tail -1 magnus.conf
Init fn="load-modules" shlib="/export2/ws6.1sp11/bin/https/lib/libj2eeplugin.so" shlib_flags="(global|now)"$cat obj.conf
# You can edit this file, but comments and formatting changes
# might be lost when the admin server makes changes.
<Object name="default">
AuthTrans fn="match-browser" browser="*MSIE*" ssl-unclean-shutdown="true"
NameTrans fn="ntrans-j2ee" name="j2ee"
NameTrans fn="pfx2dir" from="/mc-icons" dir="/export2/ws6.1sp11/ns-icons" name="es-internal"
NameTrans fn="document-root" root="$docroot"
PathCheck fn="unix-uri-clean"
PathCheck fn="check-acl" acl="default"
PathCheck fn="find-pathinfo"
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"
ObjectType fn="type-by-extension"
ObjectType fn="force-type" type="text/plain"
Service method="(GET|HEAD)" type="magnus-internal/imagemap" fn="imagemap"
Service method="(GET|HEAD)" type="magnus-internal/directory" fn="index-common"
Service method="(GET|HEAD|POST)" type="*~magnus-internal/*" fn="send-file"
Service method="TRACE" fn="service-trace"
Error fn="error-j2ee"
AddLog fn="flex-log" name="access"
</Object>
<Object name="j2ee">
Service fn="service-j2ee" method="*"
</Object>
<Object name="cgi">
ObjectType fn="force-type" type="magnus-internal/cgi"
Service fn="send-cgi" user="$user" group="$group" chroot="$chroot" dir="$dir" nice="$nice"
</Object>
<Object name="es-internal">
PathCheck fn="check-acl" acl="es-internal"
</Object>JAVA settings in server.xml:
<JAVA classpathsuffix="" debug="false" debugoptions="-Xdebug -Xrunjdwp:transport=dt_socket,server=y,suspend=n" dynamicreloadinterval="-1" envclasspathignored="true" javahome="/export2/ws6.1sp11/bin/https/jdk" nativelibrarypathprefix="" serverclasspath="/export2/ws6.1sp11/bin/https/jar/webserv-rt.jar:${java.home}/lib/tools.jar:/export2/ws6.1sp11/bin/https/jar/webserv-ext.jar:/export2/ws6.1sp11/bin/https/jar/webserv-jstl.jar:/export2/ws6.1sp11/bin/https/jar/ktsearch.jar">
        <JVMOPTIONS>-Djava.security.manager</JVMOPTIONS>
        <JVMOPTIONS>-Djava.security.policy=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/server.policy</JVMOPTIONS>
    <JVMOPTIONS>-Djava.security.auth.login.config=/export2/ws6.1sp11/https-alamanac.india.sun.com/config/login.conf</JVMOPTIONS>
    <JVMOPTIONS>-Djava.util.logging.manager=com.iplanet.ias.server.logging.ServerLogManager</JVMOPTIONS>
    <JVMOPTIONS>-Xmx256m</JVMOPTIONS>
    <SECURITY anonymousrole="ANYONE" audit="false" defaultrealm="native">
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.file.FileRealm" name="file">
        <PROPERTY name="file" value="/export2/ws6.1sp11/https-alamanac.india.sun.com/config/keyfile"/>
        <PROPERTY name="jaas-context" value="fileRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.webcore.NativeRealm" name="native">
        <PROPERTY name="jaas-context" value="nativeRealm"/>
      </AUTHREALM>
      <AUTHREALM classname="com.iplanet.ias.security.auth.realm.ldap.LDAPRealm" name="ldap">
        <PROPERTY name="directory" value="ldap://localhost:389"/>
        <PROPERTY name="base-dn" value="o=isp"/>
        <PROPERTY name="jaas-context" value="ldapRealm"/>
      </AUTHREALM>
            <AUTHREALM name="solaris" classname="com.iplanet.ias.security.auth.realm.solaris.SolarisRealm">
              <PROPERTY name="jaas-context" value="solarisRealm"/>
            </AUTHREALM>
    </SECURITY>
    <RESOURCES>
        </RESOURCES>
</JAVA>

Sun one web server 6.0 admin instance

Similar Messages

Maybe you are looking for