Sun one web server and apache

Hi, all
I would like to ask what are the differences between Sun ONE Web Server 6.1 and apache 2 on the features/functions matter.
Compare with apache, what things do the SUN ONE Web can done.?
What things do the SUN ONE Web Server cannot done?
I just want to compare their functions/features.
Thank you for your help.

I don't know of a comprehensive comparison between the two, and I don't know enough about Apache Httpd to give a fair comparison. However, here are some highlights.
- Functionality: Besides from a few things that can be done with Apache Httpd and mod_rewrite but cannot be done in WS6.1, almost everything else worth doing can be done with WS6.1.
- Performance and stability: WS6.1 has the advantage here. Look at the latest SPECWeb2005 results submitted by sun (http://www.spec.org/web2005/results/web2005.html).
If you have specific features/functions that you want to list, we can offer better comparisons.

Similar Messages

Error when starting Sun ONE Web Server 6.1SP4 after successful installation

I have installed Sun ONE Web Server 6.1SP4 on my Solaris computer and I receive the following error when I try to start the Admin server:
Sun ONE Web Server 6.1SP4 B01/20/2005 17:43
failure: CORE3170: Configuration initialization failed: Error running init funct
ion load-modules: dlopen of /opt/SUNWwbsvr/bin/https/lib/libj2eeplugin.so failed
(ld.so.1: webservd: fatal: relocation error: file /opt/SUNWwbsvr/bin/https/lib/
libares3.so: symbol __res_state: referenced symbol not found)
I am running Solaris 8 and I have installed Patch 108993-22 as stated in chapter 2 of the installation and migration guide. I have also installed patches 116602-01, 115827-01, 113648-03, 112396-02, 111317-05, 111310-01, 111111-04, 111023-03, 110386-03, 108987-15, and 108528-24 since they are necessary for patch 108993-22.
I have been stumped by this error. I have tried several different ways to install this software but I always get the same error. I believe that I have the latest version of the Sun One Web Server and I received no error notifications when I installed it! Any help would be apeciated!
Thanks!!!!!

I think this might occur if you don't have the patch for SunAlert 46042 installed. There's more information on this critical Solaris security vulnerability, which was reported back in 2002, at http://sunsolve.central.sun.com/search/document.do?assetkey=1-26-46042-1
Can you run the following command to check if you have patch 109326-09 installed and let us know the result?showrev -p | grep 109326If you don't have 109326-09 or higher installed, you should install it as soon as possible. You can follow the link from the SunAlert. Better yet, install the latest Solaris 8 recommended patch cluster from http://sunsolve.sun.com/pub-cgi/show.pl?target=patches/patch-access to make sure your system is fully patched and up to date.

How do you get Sun One Web Server to read white spacing in a url

Hi guys,
I am currently using Sun One Web Server and this is the problem that i am currently facing.
The url which is i am trying to read from the Sun One Web Server is http://test:8000/test/Testing%20A%20B
The error which i am getting is java.lang.RuntimeException: java.net.URISyntaxException: Illegal character in path
The reason why this is happening is because the original url is http://test:8000/test/Testing A B It has spacing in between the url. I cannot get rid of the spacing thru the code where its bound to a Content Management System. So the only way is to get the Sun One Web Server to be able to read this kind of url. There are about 300 to 400 of this types of url as they are dynamically generated.
I was looking at the obj.conf and magnum.conf file to see whether i can manipulate this url to work for this situation. But with no luck.
Can anyone please let me know if they have came across this problem.
Thanks.

Hi,
This is the stack Trace:
Error 500--Internal Server Error
java.lang.RuntimeException: java.net.URISyntaxException: Illegal character in path at index 29: /models/Sportwagon/Sportwagon SS V-Series
     at au.com.holden.cs.assembler.FriendlyURLAssembler.getInputURI(FriendlyURLAssembler.java:329)
     at au.com.holden.web.mvc.ViewUtil.getInputModelAndView(ViewUtil.java:29)
     at au.com.holden.web.mvc.navigation.ModelNavigationController.handleNoSuchRequestHandlingMethod(ModelNavigationController.java:17)
     at org.springframework.web.servlet.mvc.multiaction.MultiActionController.handleRequestInternal(MultiActionController.java:375)
     at org.springframework.web.servlet.mvc.AbstractController.handleRequest(AbstractController.java:153)
     at org.springframework.web.servlet.mvc.SimpleControllerHandlerAdapter.handle(SimpleControllerHandlerAdapter.java:45)
     at org.springframework.web.servlet.DispatcherServlet.doDispatch(DispatcherServlet.java:820)
     at org.springframework.web.servlet.DispatcherServlet.doService(DispatcherServlet.java:755)
     at org.springframework.web.servlet.FrameworkServlet.processRequest(FrameworkServlet.java:396)
     at org.springframework.web.servlet.FrameworkServlet.doGet(FrameworkServlet.java:350)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:42)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3496)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2180)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2086)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1406)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
Caused by: java.net.URISyntaxException: Illegal character in path at index 29: /models/Sportwagon/Sportwagon SS V-Series
     at java.net.URI$Parser.fail(URI.java:2809)
     at java.net.URI$Parser.checkChars(URI.java:2982)
     at java.net.URI$Parser.parseHierarchical(URI.java:3066)
     at java.net.URI$Parser.parse(URI.java:3024)
     at java.net.URI.(URI.java:578)
     at au.com.holden.cs.assembler.FriendlyURLAssembler.getInputURI(FriendlyURLAssembler.java:326)
     ... 26 more
This is the path which was access by me using Sun One Web Server: http://poll:8006/models/Sportwagon/Sportwagon%20SS%20V-Series
As you can see that Sun One Web Server dont like spacing between url.
Does anyone know how to fix this problem thru configuration in Sun One Web Server?

Where is Sun One Web Server's equivalent to Tomcat's common/lib

i'm new to sun one web server and i'm trying to set up a connection pool. i set up a resource using the server manager but when i try to run my app, it produces a
java.lang.ClassNotFoundException: oracle.jdbc.pool.OracleDataSourcei have the oracle driver jar i just dn't know where to put it.
can anyone help?

No, the jars would not be picked up unless they are explicitely added to the server.xml classpathsuffix, or put in the web server instance lib directory.
Ex 1: putting them in the instance lib dir (no need to add them to classpathsuffix):
/opt/SUNWwbsvr/https-hostname.domainname/lib/
Ex. 2: If you have a jar file in your home directory, for example:
/home/username/lib/classes12.jar
You could have to add it to the classpath prefix in server.xml:
<JAVA ... classpathsuffix="/home/username/lib/classes12.jar" ... >
In this case, you could have all three server pointing to the same jar.
The nativelibrarypathprefix is for native lib files (platform specific files, not jars)

Does Sun One Web Server support server-side javascripts?

Hi,
We have used Netscape iplanet web server running our server-side javascripts for a few years. We're evaluating the latest Sun One web server and see if it can run the server-side javascripts. Does Sun One support server-side javascripts? If so, where do I can find the document?
Thanks.

you can use JScript (a type of server side java script) if you install Sun One ASP. it also gives you VBScript support as well

NetBeans and Sun ONE Web Server 6.1

I have a JSP / Beans / Servlet Web application working in Tomcat on my local machine, a Macintosh laptop. I used NetBeans to create it all, and everything works fine there. I have tried to upload everything to another computer (Solaris based) which is running Sun ONE Web Server 6.1, but am having problems.
I uploaded the WAR file that NetBeans created, and uploaded the 'web' directory that NetBeans created. I can access HTML files from that web folder, but when I ask it to go to the first page, index.jsp, it has a problem with the beans. In my JSP file I do:
<jsp:useBean id="db" class="drc.database" scope="session" />
It seems to be having problems loading that class. What do I need to do? Here is the error code:
[04/Aug/2005:17:15:36] fine (15708):      for host 129.147.40.215 trying to GET /index.jsp, ntrans-j2ee reports: mapped uri "/index.jsp" in context "" to resource "jsp"
[04/Aug/2005:17:15:36] fine (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: context = StandardEngine[null].StandardHost[drc].StandardContext[]
[04/Aug/2005:17:15:36] fine (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: contextPath =
[04/Aug/2005:17:15:36] fine (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: wrapper = StandardEngine[null].StandardHost[drc].StandardContext[].StandardWrapper[jsp]
[04/Aug/2005:17:15:36] fine (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: servletPath = /index.jsp
[04/Aug/2005:17:15:36] fine (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: pathInfo = null
[04/Aug/2005:17:15:36] info (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): JspEngine --> /index.jsp
[04/Aug/2005:17:15:36] info (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): ServletPath: /index.jsp
[04/Aug/2005:17:15:36] info (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): PathInfo: null
[04/Aug/2005:17:15:36] fine (15708):      for host 0.0.0.0 trying to GET /index.jsp, ntrans-j2ee reports: mapped uri "/index.jsp" in context "" to resource "jsp"
[04/Aug/2005:17:15:36] info (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): RealPath: /www/html/drc/index.jsp
[04/Aug/2005:17:15:36] info (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): RequestURI: /index.jsp
[04/Aug/2005:17:15:36] info (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: WEB2798: [] ServletContext.log(): QueryString: null
[04/Aug/2005:17:15:36] failure (15708):      for host 129.147.40.215 trying to GET /index.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSPWEB4124:
     An error occurred at line: 3 in the JSP file: /index.jsp
     WEB4126: Generated servlet error:
     /opt/SUNWwbsvr/https-kesin.Central.Sun.COM/ClassCache/drc/default-webapp/_jsps/_index_jsp.java:66: package drc does not exist
     drc.database db = null;
     ^
     WEB4124:
     An error occurred at line: 3 in the JSP file: /index.jsp
     WEB4126: Generated servlet error:
     /opt/SUNWwbsvr/https-kesin.Central.Sun.COM/ClassCache/drc/default-webapp/_jsps/_index_jsp.java:69: package drc does not exist
     db= (drc.database)
     ^
     WEB4124:
     An error occurred at line: 3 in the JSP file: /index.jsp
     WEB4126: Generated servlet error:
     /opt/SUNWwbsvr/https-kesin.Central.Sun.COM/ClassCache/drc/default-webapp/_jsps/_index_jsp.java:74: package drc does not exist
     db = (drc.database) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "drc.database");
     ^
     3 errors
     at org.apache.jasper.compiler.Compiler.compile(Compiler.java:312)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.loadJSP(JspServlet.java:764)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.access$000(JspServlet.java:624)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:412)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:363)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:578)

it is certifying / authenticating that the secured
web site is owned by the genune party and the
transactions with the party is doing through a
encrypted format.
Am i correct up to this???Correct, that is what SSL/certificates are for.
>
Then my dowt is that
Is it possible to make my server SSL enabled with
h out using any certificate ????( the documents you
are given is telling about certificates)No it is not possible - the whole idea behind SSL communication is that it is based on TRUSTED secure communication. If a client can not check validity of server's certificate it is not trusted any more.
It might not seem to be the case when you create a self-signed certificate, but it really is so. In case of a self signed certificate you(i.e your browser) trust yourself with whatever you do with your application on your webserver.
After all can I install some certificates lateron ??
If you really need SSL with your webserver you have to either create a self signed certificate, see this: http://sial.org/howto/openssl/self-signed/
or request a test certificate from www.verisign.com or www.thawtee.com

Sun ONE Web Server 6.1SP5 and Communications Express Error

I post this to the wrong forum i think i am getting this error after running the config-uwc.
Sun ONE Web Server 6.1SP5 B06/23/2005 22:22
info: CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_04] from [Sun Microsystems Inc.]
config: for host 0.0.0.0 trying to GET /, name-trans-passthrough reports: init-passthrough has not been called
info: WEB0100: Loading web module in virtual server [https-proxy1.mrc.ac.za] at [da]
info: WEB0100: Loading web module in virtual server [https-proxy1.mrc.ac.za] at [uwc]
info: WEB0110: Ignoring invalid property [allowLinking] = [true]
info: WEB0100: Loading web module in virtual server [https-proxy1.mrc.ac.za] at [search]
warning: CORE3283: stderr: Exception in thread "Thread-1" java.lang.NoClassDefFoundError: org/mozilla/jss/crypto/KeyGenAlgorithm
warning: CORE3283: stderr: at java.lang.Class.forName0(Native Method)
warning: CORE3283: stderr: at java.lang.Class.forName(Class.java:164)
warning: CORE3283: stderr: at com.iplanet.services.util.Crypt.createInstance(Crypt.java:133)
warning: CORE3283: stderr: at com.iplanet.services.util.Crypt.<clinit>(Crypt.java:103)
warning: CORE3283: stderr: at com.iplanet.services.ldap.LDAPUser.getPasswd(LDAPUser.java:117)
warning: CORE3283: stderr: at com.iplanet.services.ldap.ServerInstance.getPasswd(ServerInstance.java:128)
warning: CORE3283: stderr: at com.sun.identity.security.ServerInstanceAction.run(ServerInstanceAction.java:92)
warning: CORE3283: stderr: at java.security.AccessController.doPrivileged(Native Method)
warning: CORE3283: stderr: at com.iplanet.am.util.AdminUtils.<clinit>(AdminUtils.java:82)
warning: CORE3283: stderr: at com.sun.identity.security.AdminDNAction.run(AdminDNAction.java:86)
warning: CORE3283: stderr: at java.security.AccessController.doPrivileged(Native Method)
warning: CORE3283: stderr: at com.sun.identity.authentication.internal.server.SMSAuthModule.initialize(SMSAuthModule.java:129)
warning: CORE3283: stderr: at com.sun.identity.authentication.internal.LoginContext.login(LoginContext.java:122)
warning: CORE3283: stderr: at com.sun.identity.authentication.internal.AuthLoginThread.run(AuthLoginThread.java:82)

I reran the access manager configuration and deployed it to the web server and now the webserver starts up successfully. I think my problem was that the file I was using initially wasn't properly setup for my enviroment.
Carinus

Disable PUT and DELETE HTTP methods in Sun ONE Web Server 6.1

Hello ,
i want disable PUT and DELETE methods in SunOne 6.1 , i don't find the solution ...
Thnaks to help me .
telnet www.mywebsite.com 80
Trying 145.248.193.13...
Connected to www.mywebsite.com.
Escape character is '^]'.
OPTIONS * HTTP/1.0
HTTP/1.1 200 OK
Server: Sun-ONE-Web-Server/6.1
Date: Wed, 18 Jan 2006 08:07:41 GMT
Content-length: 0
Allow: HEAD, GET, PUT, POST, DELETE, TRACE, OPTIONS, MOVE, INDEX, MKDIR, RMDIR
Connection: close

are you sure that it isn't a vulnerability ? if i understand you , OPTIONS * HTTP/1.0 list all the possible methods but they are not actived ?
i have test with OPTIONS / HTTP/1.0 , is that the those possible methods : HEAD , GET ??
thanks
telnet www.mywebsite.com 80
Trying 145.248.193.13...
Connected to www.mywebsite.com.
Escape character is '^]'.
OPTIONS / HTTP/1.0
HTTP/1.1 200 OK
Server: Sun-ONE-Web-Server/6.1
Date: Wed, 18 Jan 2006 11:11:07 GMT
Content-length: 0
Allow: HEAD, GET
Connection: close

Sun ONE Web Server 6.1 and Beans

Hello,
I am learning JSP and I have a new install of Sun ONE Web Server Enterprise Edition 6.1. I have a some java code (a class) I would like to use in my JSP page via <jsp:useBean...>.
Where do I put my .java (or compiled .class) file?
For example: UserData.class
Thanks,
Michael

Thanks for the reply.
Under my <appdir> I created a WEB-INF and classes directries. I copied my .class file to it but still get the message in the Sun One 6.1 error log:
C:\Sun\WebServer6.1\https-titan\ClassCache\https-titan\default-webapp\_jsps\_apps\_bean1\_SaveName_jsp.java:66: package user does not exist
user = (user.UserData) java.beans.Beans.instantiate(this.getClass().getClassLoader(), "user.UserData");
^
I am so new - what else can you recommend?
Thanks again,
Michael

Help for Installing PHP and Sun One Web Server

Hi
I tried to install PHP 5.1.4 and Sun One Web Server 6.1. I am not able to complete this and got stuck. All the available materials in net seems to flow above my head.
It will be very helpful if someone could let me know the step by step configuration a bit brief for the same.
Thanks in advance
Kathirvel Balakrishnan

Hi Craig
I am following these steps,
1st step : Installing PHP on the WindowsNT server (NT users only)
Copy the php files on your server
Get the php zip file
Copy the php files under a directory (for example : d:php4)
(be careful don't use c:Program Filesphp because of the space between Program and Files
copy php4ts.dll to c:winnt and msvcrt.dll if you don't already have it on your system
Edit php.ini-dist
rename php.ini-dist to php.ini
Edit php.ini : Indicate in which directory you have copied youre php files. (extension_dir = d:php4extensions ; directory in which the loadable extensions (modules) reside.)
copy php.ini in winnt directory (php.ini is parsed in my config)
Matthias Kramer told me that he had to move php.ini to <path-to-netscape-server>/https-servername/config for it to be parsed
Make a file association under Windows NT
In a DOS Window, type assoc .php=PHPScript
ftype PHPScript=d:php4php.exe %1 %*
Test the 1st step
Create a C:test.php file with a single line like <? echo("Nothing to write"); ?>
Create a C:test.bat file with 2 lines test.php
pause
double-clic on test.bat
If you see something like X-Powered-By: PHP/4.0.3
Content-type: text/html
Nothing to write
then the NT association works!!
2nd step : Configuring Netscape Enterprise Server or iPlanet for PHP4 with nsapi (NT & UNIX)
Unix users only
Compile PHP as follows: ./configure --with-nsapi=/usr/local/netscape/server4 --enable-libgcc
make
make install
Add LD_LIBRARY_PATH=<libdir> to your Netscape server startup script
where <libdir> is the full path to the directory where libstdc++.so.2.10.0 is located (usually /usr/local/lib)
Add a mime-type to the Netscape Server
In the Netscape Administration console chose Preferences|Mime Types
Add a new type called magnus-internal/x-httpd-php for exts=php
Click here for screenshot
Stop your Web Server
Make a copy of obj.conf located in: <path-to-netscape-server>/https-servername/config
Modify obj.conf
There are several section in obj.conf
At the end of the Init section of obj.conf (necessarely after mime type init),
place this two lines For NT users
Init fn="load-modules" funcs="php4_init,php4_close,php4_execute,php4_auth_trans" shlib="d:/php4/sapi/php4nsapi.dll"
Init fn="php4_init" errorString="Failed to initialise PHP!"
For Unix users
Init fn="load-modules" funcs="php4_init,php4_close,php4_execute,php4_auth_trans" shlib="/usr/local/netscape/server4/bin/libphp4.so"
Init fn="php4_init" errorString="Failed to initialise PHP!"
In The < Object name="default" > section,
place this line (necessarely after all 'ObjectType' and before all 'AddLog' lines) Service fn="php4_execute" type="magnus-internal/x-httpd-php"
Add a new object called x-httpd-php <Object name="x-httpd-php">
ObjectType fn="force-type" type="magnus-internal/x-httpd-php"
Service fn=php4_execute
</Object>
Restart your Web Server
Test the 2nd step
Put the test.php file in the document root of your server
Then type http://server/test.php
If you can see "nothing to write" in your browser then it works!
AS mentioned in step 1,
I am not getting the PHP message.
I am installing it in my laptop, it has no IP, is that has to do something with this.
Please guide me from here.
Thanks in advance
Kathirvel

Sun ONE Web Server 6.1 and p6spy integration

Has anyone successfully integrated p6spy with Sun ONE Web Server on a Windows platform? If so, any help would be greatly appreciated.

Y follow your steps (they seem correct for me too) and I get:
warning: CORE3283: stderr: Warning: Could not set property setStringmatcher due
to InvoicationTargetException
warning: CORE3283: stderr: Warning: Error registering factory [com.p6spy.engine
.logging.P6LogFactory]
warning: CORE3283: stderr: Caused By: java.lang.ClassCastException
warning: CORE3283: stderr: com.p6spy.engine.spy.P6DriverNotFoundError: Error reg
istering factory [com.p6spy.engine.logging.P6LogFactory]
warning: CORE3283: stderr: Caused By: java.lang.ClassCastException
warning: CORE3283: stderr: at com.p6spy.engine.spy.P6SpyDriverCore.initMeth
od(P6SpyDriverCore.java:289)
warning: CORE3283: stderr: at com.p6spy.engine.spy.P6SpyDriver.initMethod(P
6SpyDriver.java:78)
warning: CORE3283: stderr: at com.p6spy.engine.spy.P6SpyDriver.<clinit>(P6S
pyDriver.java:74)
warning: CORE3283: stderr: at java.lang.Class.forName0(Native Method)

Sun ONE Web Server 6.0 AND jre 1.6

I am using Sun ONE Web Server 6.0 Service Pack 11. Can I upgrade my JRE version to 1.6? Currently I am using 1.5. Your response will be much appreciated?

I am using external JRE. I have already installed it.
When I type java -version on /usr/iplanet/servers/bin/https/jre/bin, I am getting Java(TM) SE Runtime Environment (build 1.6.0_16-b01). My question is, will it cause any issues when I run my application? Has sun specified like JRE 1.6 should be used on Sun ONE Web Server 6.1 onwards only?

Problems with Sun One Web Server 6.1 javax.xml.xpath package not found

I used myeclipse to build an xml app and tested on jboss. it worked perfectly. However when i deployed it to our solaris sun one web server the app fell apart completely with the following error. I m unable to figure out what went wrong. Any help will be much appreciated.
Thanks.
[11/Dec/2007:22:12:37] failure (13539):      for host 121.247.233.169 trying to GET /feeds/rss.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     org.apache.jasper.JasperException: WEB4000: Unable to compile class for JSP
     /opt/SUNWwbsvr/test/ClassCache/test/_jsps/_feeds/_rss_jsp.java:8: package javax.xml.xpath does not exist
     import javax.xml.xpath.*;
     ^

Thanks for the response. I tried to use xalan package which resolved the javax.xml.xpath package not found error (xalan.jar in WEB-INF/lib folder). However I m now getting the following error. Probably incompatible version is the reason. Please advise!
[11/Dec/2007:23:46:28] failure (17028):      for host 121.247.233.169 trying to GET /feeds/rss.jsp, service-j2ee reports: StandardWrapperValve[jsp]: WEB2792: Servlet.service() for servlet jsp threw exception
     javax.servlet.ServletException: org.apache.xpath.XPathContext.<init>(Z)V
     at org.apache.jasper.runtime.PageContextImpl.handlePageException(PageContextImpl.java:536)
     at _jsps._feeds._rss_jsp._jspService(_rss_new_jsp.java:627)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)
     ----- Root Cause -----
     java.lang.NoSuchMethodError: org.apache.xpath.XPathContext.<init>(Z)V
     at org.apache.xpath.jaxp.XPathImpl.eval(XPathImpl.java:207)
     at org.apache.xpath.jaxp.XPathImpl.evaluate(XPathImpl.java:281)
     at _jsps._feeds._rss_new_jsp._jspService(_rss_jsp.java:165)
     at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:107)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at com.iplanet.ias.web.jsp.JspServlet$JspServletWrapper.service(JspServlet.java:687)
     at com.iplanet.ias.web.jsp.JspServlet.serviceJspFile(JspServlet.java:459)
     at com.iplanet.ias.web.jsp.JspServlet.service(JspServlet.java:375)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:908)
     at org.apache.catalina.core.StandardWrapperValve.invokeServletService(StandardWrapperValve.java:771)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:322)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:212)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:209)
     at org.apache.catalina.core.StandardPipeline.invoke(StandardPipeline.java:509)
     at com.iplanet.ias.web.connector.nsapi.NSAPIProcessor.process(NSAPIProcessor.java:161)
     at com.iplanet.ias.web.WebContainer.service(WebContainer.java:580)

Sun One Web Server Start Up Error

I have added filters in my application. I get the below error when I try to restart my application from Sun One Web Server,
info: CORE3282: stdout: PARSE error at line 6 column 10
info: CORE3282: stdout: org.xml.sax.SAXParseException: Element type "filter" must be declared.
failure: ContextConfig[] WEB3524: Parse error in application web.xml
org.xml.sax.SAXParseException: Element type "filter" must be declared.
at org.apache.xerces.framework.XMLParser.reportError(XMLParser.java:1016)
at org.apache.xerces.validators.common.XMLValidator.reportRecoverableXMLError(XMLValidator.java:1252)
at org.apache.xerces.validators.common.XMLValidator.validateElementAndAttributes(XMLValidator.java:2721)
at org.apache.xerces.validators.common.XMLValidator.callStartElement(XMLValidator.java:823)
at org.apache.xerces.framework.XMLDocumentScanner$ContentDispatcher.dispatch(XMLDocumentScanner.java:1222)
at org.apache.xerces.framework.XMLDocumentScanner.parseSome(XMLDocumentScanner.java:380)
at org.apache.xerces.framework.XMLParser.parse(XMLParser.java:908)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:314)
at javax.xml.parsers.SAXParser.parse(SAXParser.java:89)
at org.apache.catalina.util.xml.XmlMapper.readXml(XmlMapper.java:275)
at org.apache.catalina.startup.ContextConfig.applicationConfig(ContextConfig.java:312)
at org.apache.catalina.startup.ContextConfig.start(ContextConfig.java:1005)
at org.apache.catalina.startup.ContextConfig.lifecycleEvent(ContextConfig.java:257)
at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:155)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3702)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
failure: ContextConfig[]: WEB3525: Occurred at line 6 column 10
failure: ContextConfig[]: WEB3541: Marking this application unavailable due to previous error(s)
failure: WebModule[]: WEB2705: Context startup failed due to previous errors
failure: WebModule[]: WEB2720: Error initializing naming context for context
javax.naming.NamingException: WEB3880: Unknown context name : StandardEngine[null].StandardHost[https-sitarmor84].StandardContext[]
at org.apache.naming.ContextBindings.bindThread(ContextBindings.java:207)
at org.apache.catalina.core.StandardContext.bindThread(StandardContext.java:4123)
at org.apache.catalina.core.StandardContext.stop(StandardContext.java:3811)
at com.iplanet.ias.web.WebModule.stop(WebModule.java:329)
at org.apache.catalina.core.StandardContext.start(StandardContext.java:3782)
at com.iplanet.ias.web.WebModule.start(WebModule.java:251)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardHost.start(StandardHost.java:652)
at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1133)
at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:355)
at org.apache.catalina.startup.Embedded.start(Embedded.java:995)
at com.iplanet.ias.web.WebContainer.start(WebContainer.java:431)
at com.iplanet.ias.web.WebContainer.startInstance(WebContainer.java:500)
at com.iplanet.ias.server.J2EERunner.confPostInit(J2EERunner.java:161)
Please help.

Which version of Sun web server are you using? Is it 6.1, 7.0 or 7.0 Update2.
6.1 supports Servlet 2.3 spec. 7.0 supports Servlet 2.4 spec and 7.0 Update 1 and 2 support Servlet 2.5.
Servlet 2.3 is DTD based and Servlet 2.4 onwards are schema based.
The DTD or schema will be right after XML prolog in web.xml.
You can use one of the following:
<!DOCTYPE web-app
PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN"
"http://java.sun.com/dtd/web-app_2_3.dtd">
<web-app xmlns="http://java.sun.com/xml/ns/j2ee"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd" version="2.4">
I am sure your web.xml is not correctly written for the DTD/schema used.
If you take care of that I am sure th problem will go away.
If not, let us know if your webapp's WEB-INF/lib has xerces.jar.

Sun ONE Web Server & Remote User field

Hi,
I look for a tip to my Sun ONE Web Server 6.1 SP2 configuration.
I have:
- OS: Sun Solaris 8
- Apache 1.3 (listen port :80)
- Sun ONE Web Server 6.1 SP2 (listen port :81)
- Weblogic 8.1 SP4 (listen port :8001)
The 3 applications are in the same server.
My first configuration works:
- Apache works with basic authentification by password file (generate with htpasswd) and communicates with Weblogic
- Weblogic listens http requests and work with the remote user id (use method HttpServletRequest.getRemoteUser())
My second configuration doesn't work:
- Apache works with basic authentification by password file (generate with htpasswd) + reverse proxy mode (use VirtuaHost) and communicates with Sun ONE Web Server
- Sun ONE Web Server works with no authentification mode and communicates with Weblogic
- Weblogic listens http requests and works with the remote user id (use method HttpServletRequest.getRemoteUser())
The HttpServletRequest.getRemoteUser() returns null in my second configuration.
How I can configure my Sun ONE Web Server to foward the remote user id ?
Thank you.
Christophe.

Can you send your obj.conf?
I do not have a 6.1 Web Server installed, by guess work try
NameTrans fn="redirect" from="/index.html" url="/"
Also remove find-index or any such SAFs if you have in your obj.conf
PathCheck fn="find-index" index-names="index.html,home.html,index.jsp"Why do you need this?

Sun one web server and apache

Similar Messages

Maybe you are looking for