Sun One Web Server connection pool goes stale after some time
Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.
Hi all,
I have a few web applications running on Sun One Web Server 6.1 (SP4). I configured a connection pool via the web admin of the web server. I do not know why the connections in the connection pool are never released after some time (this happened for 3 times with a couple of months in between). I need to reboot the web server to solve this problem everytime the connection pool goes stale. I have verified that the resources are released (stream and connection are closed) with proper programming logic. Even so, I think that the connections will be timed out (the setting is 5 minutes) by the web server as a bulletproof even if the resource is not released properly as implemented in the code logic. Can anybody help on this? I have been troubled by this problem by weeks.
Thank you in advance.
Similar Messages
-
Oracle 10G Db Starts-up After Server Reboot, BUT Goes DOWN After Some Time
Hi All,
I am really puzzled over this one. I have couple of servers running DB on them and I have used scripts to auto-enable them when server(s) reboot.
But there is one server where I see this funny behavior.
The DB comes-up after server reboot.
I can verify that in the startup logs and some more logs that I created.
I can see that LISTENER is able to communicate also.
But after a while, the DB shuts-down....!!
I have checked all the places I could. I have also tried to see the difference between this server and others (I did not install this one), but can not see any difference.
Is there anyway to find out (log) what is shutting down the DB??
Any help will be much appreciated as I am at my wits end.
Following is snap-shot from my logs:
Fri Mar 16 20:42:29 EDT 2007
Running dbstart.
Done with starting all, let's check status...
Fri Mar 16 20:42:42 EDT 2007
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 20:42:42
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Solaris: Version 10.2.0.1.0 - Production
Start Date 16-MAR-2007 00:46:56
Uptime 0 days 19 hr. 55 min. 46 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /oracle/product/10.2.0/Db_1/network/admin/listener.ora
Listener Log File /oracle/product/10.2.0/Db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.103.253.50)(PORT=1521)))
Services Summary...
Service "orcl" has 2 instance(s).
Instance "orcl", status UNKNOWN, has 1 handler(s) for this service...
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orclXDB" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
Service "orcl_XPT" has 1 instance(s).
Instance "orcl", status READY, has 1 handler(s) for this service...
The command completed successfully
Current Status:
# date
Fri Mar 16 21:30:40 EDT 2007
# su - oracle -c "lsnrctl status"
Sun Microsystems Inc. SunOS 5.10 Generic January 2005
LSNRCTL for Solaris: Version 10.2.0.1.0 - Production on 16-MAR-2007 21:30:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refused
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(HOST=10.103.253.50)(PORT=1521)))
TNS-12541: TNS:no listener
TNS-12560: TNS:protocol adapter error
TNS-00511: No listener
Solaris Error: 146: Connection refusedI was just looking at that.. Thanks for the tip.
Following is what I see. But not sure what does it tell me?? Please help......
From alert_orcl.log:
<snip>
db_recovery_file_dest_size of 2048 MB is 0.00% used. This is a
user-specified limit on the amount of space that will be used by this
database for recovery-related files, and does not reflect the amount of
space available in the underlying filesystem or ASM diskgroup.
Fri Mar 16 20:42:41 2007
Errors in file /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc:
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15
Fri Mar 16 20:42:42 2007
Completed: ALTER DATABASE OPEN
From /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
# cat /oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
/oracle/product/10.2.0/Db_1/admin/orcl/udump/orcl_ora_7700.trc
Oracle Database 10g Release 10.2.0.1.0 - 64bit Production
ORACLE_HOME = /oracle/product/10.2.0/Db_1
System name: SunOS
Node name: gcars0j6
Release: 5.10
Version: Generic_118833-24
Machine: sun4u
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 15
Unix process pid: 7700, image: oracle@gcars0j6 (TNS V1-V3)
*** SERVICE NAME:() 2007-03-16 20:42:37.548
*** SESSION ID:(159.3) 2007-03-16 20:42:37.548
Thread 1 checkpoint: logseq 255, block 2, scn 8602014
cache-low rba: logseq 255, block 3
on-disk rba: logseq 255, block 767, scn 8602399
start recovery at logseq 255, block 3, scn 0
----- Redo read statistics for thread 1 -----
Read rate (ASYNC): 382Kb in 0.16s => 2.33 Mb/sec
Total physical reads: 4096Kb
Longest record: 3Kb, moves: 0/1066 (0%)
Change moves: 1/8 (12%), moved: 0Mb
Longest LWN: 308Kb, moves: 0/29 (0%), moved: 0Mb
Last redo scn: 0x0000.0083431e (8602398)
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 1925/2083 = 0.9
*** 2007-03-16 20:42:37.702
KCRA: start recovery claims for 149 data blocks
*** 2007-03-16 20:42:37.705
KCRA: blocks processed = 149/149, claimed = 149, eliminated = 0
*** 2007-03-16 20:42:37.706
Recovery of Online Redo Log: Thread 1 Group 2 Seq 255 Reading mem 0
----- Recovery Hash Table Statistics ---------
Hash table buckets = 32768
Longest hash chain = 1
Average hash chain = 149/149 = 1.0
Max compares per lookup = 1
Avg compares per lookup = 2054/2074 = 1.0
Error in executing triggers on database startup
*** 2007-03-16 20:42:41.963
ksedmp: internal or fatal error
ORA-00604: error occurred at recursive SQL level 1
ORA-12663: Services required by client not available on the server
ORA-36961: Oracle OLAP is not available.
ORA-06512: at "SYS.OLAPIHISTORYRETENTION", line 1
ORA-06512: at line 15 -
Connecting to Oracle 9i with Sun One Web Server 6.1 SP4
I have an application that connects to an Oracle 9i database. When I run iPlanet 4.1, I am able to login to the application and run it. Since I have migrated to Sun One Web Server 6.1 SP4, I have not been able to login. Through some built in error logging, I have been able to determine that my user validation routine is receiving a Null pointer when it trys to connect to the database. I have also determined that my login servlet is executing properly. When I receive the Null pointer error, I am redirected to a failed login page, which is what is supposed to happen in such a case. I believe that I do not have the web server configured properly to connect to the database and I am not sure how to do it! Below is an excerpt from my code where the database connection occurs and the exception is detected. Any help would be appreciated!
DriverManager.registerDriver(new oracle.jdbc.driver.OracleDriver());
oracleConnect = DriverManager.getConnection("jdbc:oracle:thin:@" + chost + ":" + cport + ":" + csid ,u,p);
enable = true;
oracleConnect.close();
}catch(java.sql.SQLException e){processError.logError("validateUser Invalue user" + e.getMessage()); enable = false;}
catch(java.io.FileNotFoundException e){processError.logError("validate User error" + e.getMessage());}
catch(java.io.IOException e){processError.logError("evalidateUser rror File Error " + e.getMessage());}
catch(java.lang.NullPointerException e){processError.logError("validateUser error Null Pointer " + e.getMessage());}You are not using the server's built in JDBC Connection pooling, so there is no special WebServer configuration needed to connect to a database.
If in the other hand, you want to use the built in connection pooling, then refer to this page to see how to create a connection pool
http://docs.sun.com/source/817-1831-10/agjava.html#wp1085593
Samples on how to configure and use JDBC connection pooling can be found in the sample apps
http://docs.sun.com/source/817-1833-10/pwawap.html#wp40108 -
Poor Performance of Sun One Web Server 6.0 SP6
We are running on an E450 with 2GB of memory, Solaris 8 2/02 with Recommended and Security Patch Cluster from 31 Jul 03, Sun One Web Server 6.0 SP6, Macromedia ColdFusion 5, JDK 1.4.1_02. We are seeing intermittent (three or four times a day) performance problems, extremely poor response time.
A vanilla, �test� iPlanet web server was put up on port 2443 with https turned on and off. Repeated control tests on file operations (�copy link as�) showed similar results as those described in High Impact above. Changes to add KeepAlive parameters (in magnus.conf) showed no noticeable improvement.
Tests were conducted -- on the test server -- accessing the same file from two clients, one a thin client (TC), the other a Unix workstation (UW).
Results:
1) Sometimes process TC was started first and continued normally while process UW hung up; when this happened, only one httpd process was building cpu time;
2) Sometimes process UW was started first and continued normally while process TC hung up; when this happened, only one httpd process was building cpu time;
3) Sometimes both process TC and process UW continued normally regardless of which was started first; when this happened, two different httpd processes were building cpu time together;
Speculation on Process Management - speculation is that, in the case of the 3rd bullet above, iPlanet assigned different httpd processes to the two requests. In the case of the first two bullets, however, the belief is that iPlanet actually assigned the second request to the same process it had previously assigned the first request. In this case, the second request was left to wait. It appears that most of the work done by httpd children is performed by only two or three children, even when there are 10 available.
Questions;
Why are the other httpd children are not more fully utilized?
What about changing the number of Acceptor Threads?
Could turning on Native Polling help (UseNativePoll in magnus.conf)?
Any other thoughts about what is going on or how to fix the issue?
Thanks for any assistance
Excerpt from /etc/system
* Web Server and ColdFusion Setting
set shmsys: shminfo_shmmax = 2147483647
set shmsys: shminfo_shmmin = 1
set shmsys: shminfo_shmmni = 100
set shmsys: shminfo_shmseg = 50
set semsys: seminfo_semmns = 1750
set semsys: seminfo_semmni = 70
set msgsys:msginfo_msgmax = 65535
set msgsys:msginfo_msgmnb = 65535
set msgsys:msginfo_msgseg = 8192
set msgsys:msginfo_msgssz = 16
* Default is 512, which handles several thousand connections
*set tcp:tcp_conn_hash_size=262144
* Do not set to 0 in solaris 8 on Production Systems
*set sq_max_size=0
set rlim_fd_max=8192
set rlim_fd_cur=8192
* END of Web / ColdFusion Settings
Excerpt from /etc/rc2.d/S69inet
## Web Server and ColdFusion Settings
# Comment out tcp_slow_start_initial, because default is 4
#ndd -set /dev/tcp tcp_slow_start_initial 2
ndd -set /dev/tcp tcp_xmit_hiwat 32768
ndd -set /dev/tcp tcp_recv_hiwat 32768
ndd -set /dev/tcp tcp_conn_req_max_q 1024
ndd -set /dev/tcp tcp_conn_req_max_q0 4096
ndd -set /dev/tcp tcp_time_wait_interval 60000
ndd -set /dev/tcp tcp_keepalive_interval 900000
# Comment out next 4 to accept default
# - change only if tcp longer than 10 seconds expected
#ndd -set /dev/tcp tcp_ip_abort_interval 60000
#ndd -set /dev/tcp tcp_rexmit_interval_max 10000
#ndd -set /dev/tcp tcp_rexmit_interval_initial 3000
#ndd -set /dev/tcp tcp_rexmit_interval_min 3000
# Left out changing ephemeral (short lived) port
#ndd -set /dev/tcp tcp_smallest_anon_port 1024
# Keep default of 1480576
#ndd -set /dev/tcp tcp_cwnd_max 65535
## End of Web / ColdFusion Settings
Excerpt from magnus.conf
RqThrottle 1
MaxProcs 10
StackSize 131072
## Added for lightly loaded systems
KeepAliveQueryMeanTime 1
KeepAliveQueryMaxSleepTime 0Because the security context is set as a process context, the NSAPI thread locks the process prior to setting the security context. The older NASPI plugin that we are using is not reentrant, it will not work with the mulitthreading model. Under multithreading each thread would have access to the security context of each thread.
-
Where is Sun One Web Server's equivalent to Tomcat's common/lib
i'm new to sun one web server and i'm trying to set up a connection pool. i set up a resource using the server manager but when i try to run my app, it produces a
java.lang.ClassNotFoundException: oracle.jdbc.pool.OracleDataSourcei have the oracle driver jar i just dn't know where to put it.
can anyone help?No, the jars would not be picked up unless they are explicitely added to the server.xml classpathsuffix, or put in the web server instance lib directory.
Ex 1: putting them in the instance lib dir (no need to add them to classpathsuffix):
/opt/SUNWwbsvr/https-hostname.domainname/lib/
Ex. 2: If you have a jar file in your home directory, for example:
/home/username/lib/classes12.jar
You could have to add it to the classpath prefix in server.xml:
<JAVA ... classpathsuffix="/home/username/lib/classes12.jar" ... >
In this case, you could have all three server pointing to the same jar.
The nativelibrarypathprefix is for native lib files (platform specific files, not jars) -
Sslext NOt working Sun ONE Web Server 6.0?
Hi,
I have implemented the sslext tag for dynamic switching of http to https.
I am using ATG Dynamo Server ONLY in the Development Env. (using the default Web Server of ATG) for testing this and sslext tag works fine using the Plug-In of struts which is in sslext.jar.
but in producation the ATG Dynamo Server 6.0 is configured with Sun ONE Web Server 6.0, as forwarding request throught the Web Server to the App Server.
But here sslext stop working?? any guss why?
Sun ONE Server 6.0 is configured with ATG Dynamo Server 6.0 as Connection Module.
There are three ways a Connection Module can handle requests for files whose MIME type is text/html.
1)You can choose to have the files served by the Sun ONE Web Server,
2)by the Dynamo server,
3)or by the Sun ONE Web Server (but also send requests to Dynamo for logging).
we select the 3rd option.
any Guess why this is happening???
regards
DJSince removing the log settings from magnus.conf failed to fix the problem, the log settings are probably not the source of the problem.
Did anything else - e.g. ColdFusion configuration changes - occur at about the same time you changed the log settings? -
Deploying servlets in the Sun One Web Server 6.1
Friends, Please let me know how to deploy servlets in the Sun One Web Server 6.1.
Thanks in advance,
Madan.You cannot get that behavior.
When an SSL client and server negotiate the connection, the client sends a list of all the cipher suites it supports. From that list the server will pick the most secure cipher suite which it also supports (if the server doesn't support any of the cipher suites proposed by the client, the connection establishment will fail).
RC4 (128bit) is more secure than 3DES (112 bit). Thus, a server will never pick 3DES above RC4_128 if both are valid options (i.e. when both client and server support both). If you really wanted to force use of 3DES you need to disable RC4_128 in the server (or all the clients; or both). -
Integration of Sun One Web Server 6.0 with Sun One App Server 7.0
Is it possible to integrate Sun One Web Server 6.0 with the Sun One App Server 7.0??
Sun One App Server 7.0 comes with the in-built HTTP listener. But we want to know if there is a way by which we can use the Sun One Web Server 6.0 with the App Server 7.0 and not the in-bulit HTTP listener?As suggested by you, I have used Sun ONE Application Server 7's plugin to connect the Sun ONE Web Server 6.0 with Sun ONE Application Server 7 as per the information given in Sun ONE Application Server 7 Administrator's Guide.
I have added the plugin package to the webserver and added the following into the magnus.conf:
Init fn="load-modules" shlib="C:/iPlanet/Servers/plugins/passthrough/passthrough.dll" funcs="init-passthrough,auth-passthrough,check-passthrough,service-passthrough" NativeThread="no"
Init fn="init-passthrough"
and to the obj.conf
NameTrans fn="assign-name" from="(/A2P2Test|/A2P2Test/*)" name="passthrough"
<Object name="passthrough">
ObjectType fn="force-type" type="magnus-internal/passthrough"
Service type="magnus-internal/passthrough" fn="service-passthrough" servers="http://<application server http listener>"
Error reason="Bad Gateway" fn="send-error" uri="$docroot/badgateway.html"
</Object>
The webserver starts up without any errors but never forwards any requests what might I be doing wrong? -
Sun One web server 6.0 Authentication
Does anyone know if it is possible to use form based authentication under Sun One Web Server 6.0, that checks the user authentication on a proprietary API. I need to use a JAVA library to authenticate users and i would like to use it under the form based authentication method inside the web server. Is it possible to write a plug-in for web server authentication mechanism?
Thank youI have almost identical problem (topic �iPlanet 6.0 stops responding�). Since than I made some serious testing and found out that NSAPI does not produce problem. There are two types of delays: the shortest last from 10 to 20 seconds and usually there is �Error accepting connection (The semaphore timeout period has expired.� message in error log. The longest sometimes last more than 10 minutes.
This is short cut from my response time log (in miliseconds):
10:30:18 Response: 15
10:30:28 Response: 32
10:30:38 Response: 47
10:30:48 Response: 31
10:31:06 Response: 8265
10:31:17 Response: 188
10:31:27 Response: 31
10:31:37 Response: 16
10:31:47 Response: 16
10:31:57 Response: 31
10:32:07 Response: 32
10:32:17 Response: 31
10:32:37 Response: 10578
10:32:47 Response: 31
10:32:57 Response: 31
10:33:07 Response: 32
10:33:17 Response: 47
10:33:27 Response: 31
10:33:38 Response: 266
10:33:48 Response: 62
10:33:58 Response: 31
10:34:08 Response: 47
10:34:18 Response: 47
10:34:28 Response: 31
10:34:49 Response: 11047
10:34:59 Response: 31
10:35:10 Response: 93
10:35:20 Response: 32
10:35:30 Response: 46
10:35:40 Response: 32
10:35:50 Response: 47
10:36:00 Response: 46
10:36:10 Response: 32
10:36:20 Response: 62
10:36:30 Response: 47
10:36:40 Response: 31
10:36:50 Response: 391
10:37:01 Response: 297and Connection statistics from Admin web at delay
Total Number Of Connections: 31644
Maximum Number Of Queued Connections: 4096
Peak Number Of Queued Connections: 285
Current Number Of Queued Connections: 285
Number Of Processes: 1 Configuration is Sun One Web Server 6.0.6, Win2K Advanced Server with SP4, Single Processor Machine (Compaq DL360). -
Sun one web server 6.0 admin instance
Hi,
After installing Sun one web server 6.0 sp6 on HP-UX, the admin server instance seems to work fine (i.e. I can bring up the admin web page). However, I cannot bring up web page from other web server instance. it gives me this error "the page cannot be displayed". Am I supposed to get a default webpage from this web server? How can I tell if this web server is working properly? Please help.
thanks,
PaulHi,
thanks for your prompt reply Joe. No, I don't get anything in the access log but I got some error messages in error log. It looks like the error indicates the web server crashed. Please help. I've been struggling to get this web server running and it's going nowhere.
"[24/Dec/2003:08:40:19] catastrophe ( 8291): Server crash detected (signal SIGBUS)
[24/Dec/2003:08:40:19] info ( 8291): Crash occurred in NSAPI SAF NSServletNameTrans
[24/Dec/2003:08:40:26] failure ( 8290): Child process admin thread is shutting down
[24/Dec/2003:08:40:26] info ( 8326): Installing a new configuration
[24/Dec/2003:08:40:26] info ( 8326): [LS ls1] http://hpusam20, port 1040 ready to accept requests
[24/Dec/2003:08:40:26] info ( 8326): A new configuration was successfully installed
[24/Dec/2003:08:40:26] warning ( 8326): Port directive ignored
[24/Dec/2003:08:40:26] warning ( 8326): The server configuration may require more file descriptors than the operating system provides. If you encounter PR_PROC_DESC_TABLE_FULL_ERROR errors, you may wish to increase the operating system hard file descriptor limit from 1024 to 5763 (see your operating system documentation) or decrease one or more of the following settings: MaxFiles in nsfc.conf and ConnQueueSize, RqThrottle, and MaxKeepAliveConnections in magnus.conf." -
While starting sun one web server error message
i have installed sun one web server 6.1,then i tried to start it from start up menu icon "start server administration server".the command prompt just displays and goes off.then i tried to start it from command prompt by giving path
"C:\Sun\WebServer6.1\https-pcname.com>startsvr".
error comes like this
C:\Sun\WebServer6.1\https-pcname.com>net start https-pcname.com Access is denied
can any one help me to solve this .You most probably don't have admin priviledges required to start a service on this Windows machine.
-
Cannot initialize CGI exec subsystem - Sun ONE Web Server 6.1
Hello,
I have a problem connecting to a running admin server on Solaris 9. Startup is as follows:
(error log)
[12/Mar/2004:11:06:43] info ( 2579): CORE1116: Sun ONE Web Server 6.1 B08/22/2003 12:37
[12/Mar/2004:11:06:43] info ( 2580): CORE3016: daemon is running as super-user
[12/Mar/2004:11:06:47] info ( 2580): CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.4.1_03] from
[Sun Microsystems Inc.]
[12/Mar/2004:11:06:49] info ( 2580): WEB0100: Loading web module in virtual server [vs-admin] at [/admin-
app]
[12/Mar/2004:11:06:56] info ( 2580): HTTP3072: [LS ls1] http://lab1:84 ready to accept requests
[12/Mar/2004:11:06:56] info ( 2580): CORE3274: successful server startup
Then, when I try to connect to it with the browser it results with an error:
[12/Mar/2004:11:09:31] failure ( 2580): cgi_init reports: HTTP4047: could not initialize CGI subsystem (Cgistub path ../../bin/https/bin/Cgistub), err fork() failure [Not enough space]
[12/Mar/2004:11:09:31] failure ( 2580): for host 10.101.12.146 trying to GET /https-admserv/bin/index, cgi_start_exec reports: HTTP4066: cannot initialize CGI exec subsystem
What is the meaning of '...not enough space' ?
The port itself is still listening:
*.84 *.* 0 0 49152 0 LISTEN
I must add that the server itself has been already successfully installed, ealier tests with the admserv were fine. But all of a sudden I can't get rid of this error, I made no changes except several reboots.
Regards NickHello trejo.cj,
space in /tmp seems not to be the problem:
! root@lab1:/tmp# df -k
Filesystem kbytes used avail capacity Mounted on
/dev/dsk/c0t0d0s0 479872 99067 332818 23% /
/dev/dsk/c0t0d0s6 4031059 986895 3003854 25% /usr
/proc 0 0 0 0% /proc
mnttab 0 0 0 0% /etc/mnttab
fd 0 0 0 0% /dev/fd
/dev/dsk/c0t0d0s4 1984564 1250344 674684 65% /var
swap 43168 16 43152 1% /var/run
swap 59064 15912 43152 27% /tmp
/dev/dsk/c0t0d0s5 8063580 4078907 3904038 52% /opt
/dev/dsk/c0t0d0s7 15119586 3999501 10968890 27% /export/home
ls -la /tmp
prw-r----- 1 cics cics 0 Mar 16 12:00 .LAB1REG.fifo
drwxrwxr-x 2 root root 104 Mar 16 11:28 .X11-pipe
drwxrwxr-x 2 root root 104 Mar 16 11:28 .X11-unix
drwx--x--x 2 cics cics 106 Mar 16 12:10 EFC1385
drwx--x--x 2 Slab1 cics 106 Mar 16 12:00 EFS945
drwx------ 2 netlife netlife 264 Mar 16 11:56 https-admintool-9d93b4d6
drwx------ 2 root other 207 Mar 16 11:54 https-admserv-9d93b4d6
drwx------ 2 netlife netlife 162 Mar 16 11:54 https-btv-9d93b4d6
-r--r--r-- 1 root root 0 Mar 16 11:28 llbdbase.dat
-rw-r--r-- 1 root other 0 Mar 16 11:52 lock.https-admintool.84
-rw-r--r-- 1 root other 0 Mar 16 11:52 lock.https-admserv.84
-rw-r--r-- 1 root other 0 Mar 16 11:52 lock.https-btv.84
! root@lab1:/tmp# cd https-admintool-9d93b4d6
! root@lab1:/tmp/https-admintool-9d93b4d6# ls -la
srwxrwxrwx 1 netlife netlife 0 Mar 16 11:56 .cgistub_676
srwxrwxrwx 1 root other 0 Mar 16 11:54 iwsadmin.675
-rw-r--r-- 1 root other 720896 Mar 16 12:05 iwsstats.https-admintool
srwxr-xr-x 1 root other 0 Mar 16 11:54 iwswatchdog.674
The file iwsstats.https-admintool is a binary. Are there any hints inside why the server gives this error? If yes, can it be displayed?
I my case I have installed a virtual server named admintool, this is owned by user netlife.
Now I changed in the Server Manager in the CGI settings > Listen Sockets the info about CGI user and CGI group according to the netlife user.
Right now it works, so I will watch out for further occurences.
Nick -
IPlanet migration failure for Sun One Web server 6.1SP6
Recently we downloaded the Sun One Web server 6.1SP6 and we are having problem trying to upgrade our current version. We have been able to install the package and get the admin console running but we can not migrate the current instances across to the new version. We can successfully choose an instance to migrate however once we click the migrate button, absolutely nothing happens in the browser and nothing can be seen in any error logs and truss indicates a read of a pipe going nowhere, after which the cgi stub terminates.
We are migrating from
iPlanet-WebServer-Enterprise/6.0SP5 B10/31/2002 16:22
to
CORE1116: Sun ONE Web Server 6.1SP6 B05/07/2006 12:33well, it is good that you have considered to upgrade considering 6.0 Sp5 has been EOL'ed for some time now.
here is the url that describes migrating to 6.1 from 6.0
http://docs.sfbay/app/docs/doc/819-6514/6n8h9dr61?a=view
now, if you are still having issues with migration using GUI, you can provide us the admin server error logs or call Sun tech support (if you have support contract) to help you with this. -
Disable PUT and DELETE HTTP methods in Sun ONE Web Server 6.1
Hello ,
i want disable PUT and DELETE methods in SunOne 6.1 , i don't find the solution ...
Thnaks to help me .
telnet www.mywebsite.com 80
Trying 145.248.193.13...
Connected to www.mywebsite.com.
Escape character is '^]'.
OPTIONS * HTTP/1.0
HTTP/1.1 200 OK
Server: Sun-ONE-Web-Server/6.1
Date: Wed, 18 Jan 2006 08:07:41 GMT
Content-length: 0
Allow: HEAD, GET, PUT, POST, DELETE, TRACE, OPTIONS, MOVE, INDEX, MKDIR, RMDIR
Connection: closeare you sure that it isn't a vulnerability ? if i understand you , OPTIONS * HTTP/1.0 list all the possible methods but they are not actived ?
i have test with OPTIONS / HTTP/1.0 , is that the those possible methods : HEAD , GET ??
thanks
telnet www.mywebsite.com 80
Trying 145.248.193.13...
Connected to www.mywebsite.com.
Escape character is '^]'.
OPTIONS / HTTP/1.0
HTTP/1.1 200 OK
Server: Sun-ONE-Web-Server/6.1
Date: Wed, 18 Jan 2006 11:11:07 GMT
Content-length: 0
Allow: HEAD, GET
Connection: close -
Struts & Sun ONE Web Server Enterprise Edition 6.1
Is there a web page that explains how to install struts and Tiles so that all web pages on the server use the information. I am trying to install on Sun ONE Web Server Enterprise Edition 6.1.
I would like to do a company web site with one location for layouts, images, etc and then all later installed web applications can use this information.Hi,
Its wise to use Oracle THIN client, unless you will need any OCI specific features.
Oracle OCI driver requires that your client must have a Oracle Client installation to connect using OCI, but the thin driver only requires classes12.jar in the client host to connect.
You can browse thru the Oracle JDBC Developers guide for more info.
http://download-west.oracle.com/docs/cd/B10501_01/java.920/a96654/toc.htm
Elango.
Maybe you are looking for
-
- Product name: i phone 4G - Memory:32GB - Operating System: i OS 7.0.0 (Not sure) Dear Sir, I forget my icloud password and my e-mail has been closed and I tried to recover it but it looks that I also lose my e-mail data and my phone is stacked so c
-
Link won't open after upgrading to version 3.1
Link doesn't open in Safari version3.1 But it works "Open Link in New Tap." why is that?
-
Smart Playlist's not updating dynamically
Hi, There seems to be a little glitch in the smart playlists (SPL) on my touch 2G. I used to manually manage the music on my device and I noticed no issue with the SPL's being dynamic. However I started syncing the music recently and I observed that
-
Hi, a i'm facing a new problem binding Menu Generated from adfc-config.xml. My menu XML like this: <?xml version="1.0" encoding="windows-1250" ?> <menu xmlns="http://myfaces.apache.org/trinidad/menu"> <itemNode id="itemNode_page1" label="Page 1" acti
-
Handsome young Java apprentice seeks Princess Leia!!!!
Hello, I have had a mixed bag of help and criticism so far. Thanks for those who've helped. I really appreciate it. I am trying to learn the Java Language, i am simply not interested in someone else doing the work for me. With this in mind, any help