Sun Ray and Tarantella error in DISPLAY

I am facing the same problem.
I installed Tarantella 4.2 on Solaris 9. It worked well. I can open
sessions on both Windows and Unix servers.
But when I installed Sun Ray Server Software the error began to appear
when I connect using Tarantella to Windows servers.
I can login to the web interface and launch X-Applications. But Windows
applications give the error:
"can't read "DISPLAY": no such variable (error = NONE)
ErrCommandExecutionFailed

jhaddad,
1. Do not start sgd from the rc files start it manually after the system has
booted.
2. Change the permissions on the /tmp/X11-unix directory to allow non root
processes to write to it.
3. Change the sgd binary ttaxpe so that its group is set to root and chmod it so
that it has the "set guid" bit set (This means then when it executes it will run
with a group permission of root, which is how the standard Sun Xsun process runs).
Our recommendation would be to use option 3.
jhaddad wrote:
I am facing the following problem.
I installed Tarantella 4.2 on Solaris 9. It worked well. I can open
sessions on both Windows and Unix servers.
But when I installed Sun Ray Server Software the error began to appear
when I connect using Tarantella to Windows servers.
I can login to the web interface and launch X-Applications. But Windows
applications give the error:
"can't read "DISPLAY": no such variable (error = NONE)
ErrCommandExecutionFailed

Similar Messages

SUN ray and windows License

Hi,
I want to use sun ray solution with 100 windows client. can someone tell me which is the best license solution. i mean , should I go with windows terminal license or vmare solution.
if you can please explain me about the vmare solution and benefits.
thanks
rajesh

Well to be honest; we don't currently have someone here with full SUN knowledge that can answer that. I am a Windows administrator and trying to find all the applications and appliances whether they are compatible with AD 2008 R2 level. If the Sun Ray and V210 don't have an AD link/integration, that is then actually good news.
Olaf

SUN ray and SGD

HI,
I have Sunray and SGD servers installed on two separate solaris OS. I want to make users able to continue a session on an SGD client that was started on a DTU. How do I do it?
Thanks
Yonas

Take a look here:
Remote Control Sun Ray Session with SGD
http://ebberstwork.blogspot.com/2008/10/remote-control-sun-ray-session-with-sgd.html
or here (same article and instructions):
http://blogs.sun.com/the_field/?page=4

USB Device Redirection with Sun Ray and Windows XP Desktops (vSphere)

Hello,
i use Sun VDI 3.0 (vda_3.0_amd64.zip) in our environment.
All connected Sun Ray's use Windows XP Desktops from VMWare vSphere.
Now i have some additional USB Devices that we will use with the Desktops.
But i'm Newbie at this topic.
On of these devices are a OmniKey - Cardman 3121 this is known to work (http://www.sun.com/bigadmin/hcl/sunray/usb/readers.jsp).
But which steps should I do that it's work?

OK, the last message here was February 2008; it is now July 2008. I just noticed that Microsoft is supplying a 64 bit version of their Windows Mobile Device Center 6.1 driver for Windows Vista (64 bit) at:
http://www.microsoft.com/downloads/details.aspx?familyid=4F68EB56-7825-43B2-AC89-2030ED98ED95&displa...
I just talked to a Palm salesman yesterday and he said all their phones still will not be synchronized with any Vista 64 Bit OS; their literature recommends 32 bit only.
I am contemplating upgrading my Treo 600 to a Treo 750 with Windows Mobile 6 Professional. I am trying to figure out how to synchronize the software before I purchase anything. I think now that Microsoft has solved the problem, not Palm and nobody in Palm or my cell phone provider (Rogers here in Canada) knows this yet.
Does anybody have any experience with this ongoing 64 bit Vista problem and the Treo 750.
Also if I get positive answers here, where do I go next to figure out how to bring over my Palm Treo 600 data. Since the operating system is different, I think I am stuck with exporting my contact addresses to a csv file. I do not know how I would recover my mail. I have not been using Outlook, just PalmOneMail v1.02a.
Any help would be appreciated.
Thanks,
Rick Urquhart
Post relates to: Treo 600 (Rogers)

Sun Ray and LDA Authentication

I�m working in a config with sunray + directory server all in one box.
Rigth now the authentication of the user is througout LDAP, but i have to create the user homedir in order to login into the OS. How can I create the user homedir once I create the user account in the ldap server.? how can I handle this situation?
I need to create a script in orde to do this ? What happen if i sycnronize the user from a AD? how do i create the user homedir?

Hi nate_keegan,
thanks fot your reply...
the instructions on how set up the sunray for vpn is on the admin guide on page 120 onwards (routerless vpn capability), just incase.
For the menue to work on the sunray you need to have the gui firmware installed on the rays and to get there is stop-m
you can check the version wiht stop-v; if iit is not pre-fixed with gui- you need to update with the latest fw.
apaprently the sunrays understand the following p1 and p2 proposals:
phase 1:
pre-g2-3des-md5;
pre-g2-3des-sha,
pre-g2-aes128-md5,
pre-g2-aes128-sha
phase 2:
nopfs-esp-3des-md5,
nopfs-esp-3des-sha,
nopfs-esp-aes128-md5,
nopfs-esp-aes128-sha
hope that helps.

Sun Ray and VMware View

I am trying to connect to a View Connection Server and I get the following error:
Jan 12 11:03:52 srs0.ni.ssasis.com kiosk:uttsc[2478]: [ID 702911 user.notice] Network Level Authentication failed.
Jan 12 11:03:52 srs0.ni.ssasis.com kiosk:uttsc[2509]: [ID 702911 user.error] /opt/SUNWuttsc/bin/uttsc exited with error code 8 - exiting
Jan 12 11:03:53 srs0.ni.ssasis.com kiosk:vdm[2510]: [ID 702911 user.error] Java Accessibility Bridge for GNOME loaded.
Jan 12 11:03:53 srs0.ni.ssasis.com kiosk:vdm[2510]: [ID 702911 user.error]
Jan 12 11:03:53 srs0.ni.ssasis.com kiosk:vdm[2510]: [ID 702911 user.error] uttsc exited with errorcode: 8
Jan 12 11:03:53 srs0.ni.ssasis.com kiosk:vdm[2512]: [ID 702911 user.error] Error: Could not locate Virtual Machine for 'pseudo.00212812e42d':
exit code: 1
I test the connection directly to the desktop from my pc and with utts from the command line and works.
I try sending -no-auto-login and y gets the assigned desktop but I can still log in.
Any idea?
Regards,

Disable NLA i.e add -N off in SRVC kiosk session arguments list.
Thanks
P.S.M.Swamiji
Note: These are my personal opinions, nothing to do with my employer

My LaCie external hard drive connected to Time Machine for data backup drops it's connection and a error message displays tell me that I did not properly disconnect the device. This started after upgrading to OSX10.6.7.

My La Cie external hard drive drops it's connection after mounting on my iMac computer. This problem seems to have started after upgrading to OSX10.6.7. When I turn on my computer and than turn on the external hard drive the hard drive mounts to my disk top without any problem, but when I bring up Mail or Safari the hard drive drops its connection. Is there a fix for this problem? Hope someone can help.

The connection to 10.6.7 may just be a coincidence. I had a similar problem with a disk and was about to throw it out but decided to try a different USB cable. That fixed the problem and the drive is still in use.
Try a new cable if you have not already done so.
Dave

How can I redirect USB from Sun ray to Win2003 terminal server

Hi
I am running Sun Ray 4.2 in Solaris with SRWC 2.2 in a Kiosk mod to Windows terminal server 2003 , how can I allow users to use their USB divices from Sun Ray and appear automatically in their Windows desktop ..I try adding the following line to mikioskhdlr_win script
UTTSCPARMS="-m -b -A 24 -r sound:high" - r disk:M=/tmp/SUNWut/mnt/$USER
but it did not work .. please help

If you are using the USB Drive Daemon or manually specifying the mount then there are no issues with user access. That's only an issue with the the built in USB pass through included with SRSS 5 which is connecting directly to Windows and in essence the physical machine. The former is just mounting a network drive which is user specific.
Edited by: ot90 on Mar 1, 2010 9:00 AM

Sun Ray Smart Card User Authentication

Hello All,
I recently installed SRSS 4.1 I created 6 users for testing, 3 of which use SRWC to connect to Windows VM's. My problem is with the smart cards. They are required for the user access the SunRay and that part works, however it doesnt seem the cards are binded to any particular user. For instance any of the 6 cards can be inserted and logged into any of the accounts (correct username and pw of course). I thought that each card was linked to one user account which provided increased security. The way it is working now is kind of useless.
Any Suggestions?

Hi,
It depends very much on which type of card you are using and what authentication mechanism you set up.
The SIMPLE card that SUN ships as the Sun Ray card does AFAIK not have any options for personalisation on the Card.
What you can do with it is to use AMGH ( Advanced Multi Group Homeing is a SunRay server feature ) and tie
the CARD ID to a user name. So that when the card is inserted in the Sun Ray , you user ID will be pre-entered in the
UNIX login dialoge. But this does not prohibit the card from being used to log in as a differernt user ID .
If you use the Sun VDI 2.0 ( virtual desktop infrastructure ) software. You need to Populate the Sun Ray Server DataStore
with the Names that will be used as machine names of the virtual PC's in VMware. It is almost nessesary that the
User name is equal to the Vmware Virtual Machin name.
So in VDI the the Username in SRS-DS assoiated with a CARD becomes the virtual Machine name.
( this is not the same as the user name in AMGH but keeping the two the same probably limits the confusion )
If you get hold of a more advanced Public KEY Interchange card, it is possible to set up PKI login to a windows session
this involves some software in the windows XP client to read the smart card in the Sun Ray and to authenticate the card
whit PKI to a known certificate that you have stored for the Card in a Directory ( Active Directory or some other one )
The Sun Ray server can be loaded with the PC/SC - bypass software that allows a Windows server/client using the
Sun Windows Connector RDP software, to read and write directly to the SmartCard inserted in the SUnRay.
The Virtual PC or terminal server will work with the Smartcard reader as if it was local on the WIndows machine.
The "Active CARD" company has such a solution amongst others.
Regards
//Lars

When clicking on course details receive error " Error: Cannot Display Page"

Error: Cannot Display Page
You cannot complete this task because one of the following events caused a loss of page data:
You accessed this page using the browser's navigation buttons (the browser Back button, for example).
Your login session has expired.
A system failure has occurred.
To proceed, please select the Home link at the top of the application page to return to the main menu. Then, access this page again using the application's navigation controls (menu, links, and so on) instead of using the browser's navigation controls like Back and Forward.
We are not using any back buttons and our sessions are not expired. Users in the past (last week) have been able to access this. They are not aware of any changes made by any super administrators. Does anyone know if this is data corruption or any possible configuration that may have been done to cause this error?
If not I will have to open up an SR and provide a trace.
thanks,
Bryan

Hi Anne we are on 12.1.1. It is not a backbutton or a re-direct from what I can tell because it is only happening with Two courses. It is using a custom responsibility of ours to get to the course under the catalog. However, I can also reproduce from the training administrator seeded responsibilities. It seems to be just two of our courses and others are working fine. I have asked the users if they made any changes to these courses and they have stated that they did not. They are going to the course through the catalog, clicking on the details button of that course and the error is displayed.
Bryan

Inconsistent error message display

Using jsf/adf 10.1.3.3. Steve, I'm experiencing what seems to be an inconsistency in the way that error messages are being displayed. The problem I'm experiencing is that the first time an attribute fails validation, the error message is displayed only at the top in the message box and not beneath the respective component. The next time validation fails on this field, I see the error message at the top and beneath the component. This inconsistency seems to appear only when an attribute has been marked as mandatory (not null) and that particlar validation fails. Put another way, if I have a method validation on an attribute and that validation fails, I don't see this inconsistency. The error message always displays both at the top and beneath the component. I've tested this on one of your samples, RequiredFieldsWithCustomRequiredMessageIncludingFieldLabel, and found it happening there also. I made one slight change to the code in that example so that I could recreate this problem. There's code behind the Save button of the CreateNewEmployee.jspx which sends the user back to the 'Home' page of this app if the commit is successful. I've rewired that by returning null instead of returning "back". This way I can recreate the problem. Here are the steps to recreate:
1) Run CreateNewEmployee.jspx
2) Without entering any values, click Save.
3) Validation fails for each of the required attributes, the errors appear for each of these attributes, but only in the top message box.
4) Enter in valid values for the required fields.
5) Click Save. This should commit the record just fine.
6) Null out the value just entered for Employee Name.
7) Click Save. Validation fails for Employee Name and the error message displays both at the top and just beneath the Employee Name input.
I see this behavior without using the customized PageLifecycle class too, so I don't think that it has anything to do with those framework extension classes. Any idea as to why when validation fails the first time for a required attribute the error message does not display beneath that component as well? Thanks.

The only workaround mentioned in the bug report is to use required="#{...}" instead of showrequired="#{...}" That is, if the client side manages the enforcement of the requiredness, then the issue apparently does not occur. The bug is still open (i.e. hasn't yet been fixed in 11g).
I'd recommend you file a Service Request on Metalink and ask for a fix to bug# 5918276 if it's a showstopper issue for you.

27D error on Sun Ray client

My Sun Ray setup was working before i tried to reconfigure the Admin Gui. Once the GUI changes were added i rebooted the server and the clients would not come up. Instead of booting, they display a 27D error along with an hourglass and a DHCP address. Can someone please tell me how to get them running again. Thanks.

Not to throw this way off tangent, but is the "requirement" for Internet Exploiter ... er ... Exploder ... er ... that MS security hole ... {grumble} ... is it technical or "just because"? As long as the page doesn't use ActiveX or other MS-proprietary code, it should run fine under Firefox or Mozilla.
Your response will deem whether or not we need to bring in the Spanish Inquisition. And nobody expects the Spanish Inquisition!

Bug or wrong configuration of the Sun Ray Server+DTU+17" and 24" screenres.

I have 2 DTU, one has a 17" screen with a resolution of 1280x1024 and the other DTU has a 24" screen with a 1900x1200 resolution attached. The setting of the Sun Ray server is configured only that registrated cards, can make an kiosksession to VMware View 4.6.
When I start the DTU's, there is nothing wrong. The correct screen resolution is displayed on the screen for both DTU's. When I put a smart card into the DTU that has a 17" attached, it's indicates the correct resolution. The problem starts when I hotdesk to the other DTU with the 24" attached to, the session what was builded on the 17" will be showed on the 24". So the the resolution is 1280x1024. With this action there's nothing wrong, because the kiosksession is made on the 17" and no disconnection is made, so this is a correct resolution at this point. When I pull the card out of the 24" DTU, the screenresolution will be still at 1280x1024. It's looks like the setting will be saved on the DTU. Only a restart of a DTU will turn back the good resolution.
When I do the same as the case before, but only I start at the DTU with 24" screen the kiosksession will start at 1900x1200. When I hotdesk to the Other DTU the kiosksession is still at 1900x1200, but only this time when I pull out the card out of the 17" DTU, The DTU will give the right screen resolution of 1280x1024
the DTU's are Sun Ray 3 Plus, it doesn't matter which DTU's I place, the problems seems like that the DTU will save the last screen resolution. I got 300 of these DTU's and try a lot of them, but still the same issue.
Note: with each case explained in this thread, the kiosksession will be started at first time, the kiosksession is not builded yet or has been disconnected.
This behaviour is with a standard installation and configuration of Sun Ray server software 5.1.2. No extra script is implemented. Also I tried the UTRESIZE script that I've found on this forum, but it didn't helped.
Is this problem a bug (known issue) or is this a wrong configuration of me? This is a big issue for me

I have also a lot of fun with different screens, so I walk the "hardwired" mostly when I run into my screen does not look like correctly.
utresadm -a -c MAC -t default 1280x1024@60 ... and then this is nailed, whatever you do with this box. Very effective especially for beamers ...
what you can set, utresdef is your friend, utresadm -p show all the devices overwritten in case you need to change for a new monitor. And finally utresadm -d -c MAC -t default clears the setting.
regards, thomas

Sun Ray error when connecting to Oracle VDI - No Kiosk Sessions Available

When the Sun Ray DTUs go to connect to the Oracle VDI cluster at times they will throw the error "Error starting Kiosk session: No Kiosk accounts configured." We have tried going through the steps to confirm that the Kiosk sessions are configured on the two secondary hosts but the problem persists. When the Sun Ray DTUs do connect they will work for a while and then when left idle for a period of time will loose their connection and be unable to restart the connection with the error mentioned. The Screen Blanking option on the Sun Ray DTUs is set to "0" to prevent them from going into power-save mode but this makes no difference. The Sun Ray DTUs are all updated with the latest GUI firmware and there are no custom options set in the Sun Ray Session Servers.
The thing that bothers me the most is I have not seen any error messages in the logs. I will post up the logs as links in a follow-up post.
Has anyone had any similar issues while connecting with a Sun Ray DTU?
Currently we are running Oracle VDI 3.2.1 on the cluster.
Here are the commands we used to reset the Sun Ray Kiosk accounts:
# /opt/SUNWkio/bin/kioskstatus -c
# /opt/SUNWkio/bin/kioskuseradm status
# /opt/SUNWkio/bin/kioskuseradm delete
# /opt/SUNWkio/bin/kioskuseradm create -l utku -g utkiosk -i auto -u –c

I was trying to transfer data from oracle to sql server 2008 on a daily basis.
I have very hard time connecting to oracle from ssis package on windows server 2008. I am almost dead and cannot find any help. i was able to connect to oracle using import/export 64 bit feature of SQL Server 2008 using Oracle provider for OLEDB. But I am not sure why the same does not work with BIDS?
Here's the environment info:
1. Oracle Client 10g
2. SQL Server 2008
3. Windows Server 2008
Appreciate your help. Please save me.
Thanks,

Sun Ray Software 5 and Sun Ray Soft Client 1.0 Early Access 1 (EA1) is live

Sun Ray Software 5 and Sun Ray Soft Client 1.0 Early Access 1 (EA1) is live!
o Sun Ray Software 5 and Sun Ray Soft Client 1.0 EA1 download link
-> https://cds.sun.com/is-bin/INTERSHOP.enfinity/WFS/CDS-CDS_SMI-Site/en_US/-/USD/ViewProductDetail-Start?ProductRef=SRS-5-EA1-SP-LX-G-B@CDS-CDS_SMI] .
o Supporting documentation is available on the [Sun Ray Software Information Center|http://wikis.sun.com/display/SRS5/Home] providing installation, configuration and administration in a topic-based, wiki format.
o Technical support is available at [Sun Ray Online Forum|http://forums.sun.com/forum.jspa?forumID=875] .
o [Feedback Survey|http://www.surveymonkey.com/s.aspx?sm=RmabpiADfPy90BMFIJQPXQ_3d_3d]
-Sunil

Anyone know when SRSS5 (4.2?) is coming out? Funny I came across SRSS5 today, as just this morning we began research in what it would take to move to LTSP. We have entire departments running off SRSS4.1 on RHEL5. This has been a pretty good solution but Sun insists on keeping SRSS for Linux a poor product when compared to it on Solaris. Things like sound, USB thumb drives, etc are implemented TERRIBLY on their linux software (if at all).
I'd be willing to give SRSS5 a shot if it became available soon. Even a time frame (like end of 2009, spring 2010, etc) would help.

Sun Ray and Tarantella error in DISPLAY

Similar Messages

Maybe you are looking for