Sun Ray integration with Juniper NAC Client

Hello, we are implementing the Sun Ray environment with VMWare but are facing issues with integrating the WinXP VM's with Juniper NAC, the software gets installed and configured properly and also runs properly, but the issue happens when we logoff from the WinXP VM, the session hangs and we have to restart the Sun Ray servers in-order to kill the hung sessions. During the hung session, when we log-in using Windows RDP, everything seems to be working fine. Please Help.
Thanks in advance.
Pritipal

yes, this is possible, of course.
and if you use a sunray terminal in the office, you can simply took your session with you ;)
-- randy

Similar Messages

WebSurvey: questionary Versioning and Integration with web-mail clients

We have SRM 5.0 SRM_SERVER 5.5 SP level 7
Vendors access to a free link where they insert their data and register in SRM system. Automatically a questionnaire is sent to the vendor. Vendor complete the questionnaire and send it back to SRM with a mail sent by Outlook.
If now, we want to send back the questionnaire to the vendor (i.e. he forgot or he failed to insert one important data) the questionnaire received by the vendor is always empty, and there is no possibility to send back the questionnaire previously filled, in order to complete it just with a delta of data. This is a serious problem because our questionnaire are very long.
Moreover, it is not possible for the vendors to save a draft of the questionnaire locally on his pc, in order to complete it in more steps. This is important, because of the length of our questionnaire.
Another point of discussion is the integration with other client mail like Google o Yahoo.
Is it possible to send the questionnaire by a web client? Or the only way to send the questionnaire is by Outlook? Outlook express is good too?
Thank you very much for you attention.
Guido

Hi
<u><b>Please go through the following pointers -></b></u>
Note 779972 - SURVEY: Configuration required to receive emails
Note 889963 - ROS: Questionnaires are not updated
Re: Supplier Registration Questionnaire
Supplier self registration browser settings
SUS - registration e-mail
ROS Questionnaire Recipient Email in So50
Re: BSP Error - HTTPS has not been configured on this Server.
Response Questionnaire of Supplier Registration
SRM - questionnaire submission by the supplier
Registration - Switch from URL to Attachment
Re: Notification for Partner creation after Supplier pre screening
ROS_PRESCREEN with ROS on SUS, how to view in EBP
Sending Questionnaire
ROS Questionnaire link sent by email
Send custom email to an external server.
ROS Questionnaire Recipient Email in So50
Hope this will help.
Regards
- Atul

Sun Ray 1 with remote desktop on windows 7 ultimate

I have a windows 7 ultimate box. I have an unopened Sun Ray 1. Before I open the box, I want to know if I can use the Sun Ray 1 to connect to my windows 7 ultimate box. If I can, how do I do it? Is it easy?
Thanks

No. Sun Rays are truly thin, meaning there is no OS or clients installed on the device. You need a server to use it.

SUN ray and windows License

Hi,
I want to use sun ray solution with 100 windows client. can someone tell me which is the best license solution. i mean , should I go with windows terminal license or vmare solution.
if you can please explain me about the vmare solution and benefits.
thanks
rajesh

Well to be honest; we don't currently have someone here with full SUN knowledge that can answer that. I am a Windows administrator and trying to find all the applications and appliances whether they are compatible with AD 2008 R2 level. If the Sun Ray and V210 don't have an AD link/integration, that is then actually good news.
Olaf

Web Client Integration with Address Validation

Hi Friends,
Iam working in CRM 5.0. Please find my requirement below:
When accounts are created with or changed with PCUI and IC Web client: display feedback from Address validation software, using the "out of the box" GUI integration as a model.
1. Display addresses validation warnings/correction feedback, if any. The user will have the option to:
     a. Accept the address validation software correction , or
     b. Bypass the warning and use the original address that they entered, or
     c. Cancel and return to account maintenance
2. Display duplicate candidates and allow the user to switch to a duplicate candidate if desired by clicking
     the candidate (instead of proceeding with account creation)
How can I check whether the Address Validation software is integrated with IC Web Client? If it is not integrated, then is there any configuration to be done to get the popups for address validation and duplicate check?
Your suggestions and Ideas will be rewarded.
Regards,
Raju...

Hi Friends,
Any suggestion on this?
Thanks & Regards,
Raju

Sun Ray Software Compatibility

hi,
i want to know about the Sun Ray Compatibility with windows.
is Sun Ray server software is compatible with windows? OR
it needs only linux or Sol for installation? if it needs Linux Or Sol for installation then how can it provide Windows Env on the Desktop?
if someone has some Tech documents on how Sun Ray software works and configured, please inform me.
Regards,
Asghar

Sun Ray Server Software runs only on Solaris and Linux, so you need at least one Solaris or Linux system to control your Sun Ray terminals. After you have that you can run a Windows client program (such as rdesktop, Citrix or Sun's Sun Ray Windows Connector) on the Sun Ray server, connect that program to a Windows machine running Terminal Services and have a Windows desktop presented on the Sun Ray.
Sun Ray documentation for the current (3.1) release is at <http://docs.sun.com/app/docs/coll/1230.3>.

SUN ray and SGD

HI,
I have Sunray and SGD servers installed on two separate solaris OS. I want to make users able to continue a session on an SGD client that was started on a DTU. How do I do it?
Thanks
Yonas

Take a look here:
Remote Control Sun Ray Session with SGD
http://ebberstwork.blogspot.com/2008/10/remote-control-sun-ray-session-with-sgd.html
or here (same article and instructions):
http://blogs.sun.com/the_field/?page=4

Sun Ray Server x64 or T2?

Hi,
I have been searching around looking for some advice/benchmarking for what hardware is best for Sun Ray servers. My plan is to use the Sun Ray VMware View Connector and so the Sun Ray server will only be managing the sessions rather than providing the desktop.
Therefore, would a T2 system give more consistent performance than a x64 system? and, how many Sun Ray sessions could be expected to be managed by a T5120 or a X4100?
Finally, is running the Sun Ray server in a VM a supported config?
cheers,
Simon.

We have found that x86 series server far out strip the T series boxes for Sun Ray.
A X4100 with 8GB RAM should be able to handle 100 odd sessions. We build for our Customers on a model of around 125 sessions per server. We used to use X4100 but have moved to X4140, if you bumped the RAM on these to 16GB you should get more.
Sun Ray runs poorly under VMware and if you need to go down that route run lots of little Sun Ray servers with no more than 20 odd DTU per server.
Hope this helps

Needs software to access pdf files on sun ray client

Needs software to access pdf files on sun ray client , with mozilla firefoX or Sea monkey as a browsers
Tried to install pdf getting error ,
Needs technique or technical troubleshooting steps to access pdf files on mozilla or sea monkey or other solaris compatible Browsers on Sun ray client
Regards
Raghav b v

You can still install Acrobat Reader, Evince or Xpdf to read PDF files. But if you want that the PDF file should be displayed in a browser windows, then you can forget Evince in the previous list, or you can consider to use Firefox 19 or higher that incorpore a buid-in PDF viewer.

Microphone not working on sun ray 270 thin client

Hello
I"m trying to make headphone and microphone work on a sun ray 270 thin client for an browser (java) based application. Its basically a meeting room kind to application where people can talk with each other.
The Speaker and Headphone is working fine however mic is giving trouble. I tried to test it with /usr/dt/bin/sdtaudio but when i click on record it give an error saying could not set audio format. I tried gnome-sound-recorder as well but it says device could not be found. The device is getting created in /tmp/SUNWut/dev/utaudio directory and $UTAUDIODEV variable is also set properly.
Please tell me how to trouble shoot this problem.

Post what your environment looks like. What version of everything are you using?

Sun ray thin client printing issue ?

Hi Guys,
i was configured printer to print through sun ray thin client, but when i print its print carbage document, i changed that printer with another printer but still printing same, also i was change driver for that printer but the issue still , anybody advice me what shall i do ?
Thanks in Advance,
Basem

Hi,
Did you get to solve the problem? I was able to print from an RDP session but get continuous pages of garbage preceded by a banner page. Were you able to print from windows to a DTU attached USB printer?
Please advise.
Thank you and
BR,
Senka

27D error on Sun Ray client

My Sun Ray setup was working before i tried to reconfigure the Admin Gui. Once the GUI changes were added i rebooted the server and the clients would not come up. Instead of booting, they display a 27D error along with an hourglass and a DHCP address. Can someone please tell me how to get them running again. Thanks.

Not to throw this way off tangent, but is the "requirement" for Internet Exploiter ... er ... Exploder ... er ... that MS security hole ... {grumble} ... is it technical or "just because"? As long as the page doesn't use ActiveX or other MS-proprietary code, it should run fine under Firefox or Mozilla.
Your response will deem whether or not we need to bring in the Spanish Inquisition. And nobody expects the Spanish Inquisition!

Sun ray thin client

Hi ,,,
Suppose we have two servers with two different applications and one Sun Ray Server. How could we direct the Sun Ray Client Sessions to these two application servers simultaneousely??
Regards,
Basem

I'd look at logging in to the application servers individually, using ssh and then tunnelling the X display back to the Sun Ray client.
Something like ssh -X host1 on one terminal window and then ssh -X host2 in the other terminal window.
I think this may work. It does on Linux anyway.
Andy

NAC Integrated with Guest Server

Hi all,
I encountered a problem which happened when I integrated NAC with Guest Server.
Hope I can find solution here!
When I create an account in Guest Server, the account will also be created in NAC as local user.
If I chose "Time Profile - Start-End", the account will be created in NAC.
But if I chose "Time Profile - from First Login", the account will not be created in NAC.
So the guest can't login with this account using "Time Profile - from First Login".
All the configuration in the document including "Radius Client and Accounting" was correctly configured.
But I still can't find the solution.
Please answer me if you know the answer. Thanks a lot!!!!
Jet Li
Taiwan SI

Hi Jet Li,
This should be expected since only time profiles with start-end are supported when integrating NGS with the NAC Appliance solution:
http://www.cisco.com/en/US/docs/security/nac/guestserver/configuration_guide/20/g_guestpol.html#wp1063409
"Cisco NAC Guest Server Version 2.0 supports only start/end and from creation profiles when used with Cisco NAC Appliances"
Regards,
Fede
If this helps you and/or answers your question please mark the question as "answered" and/or rate it, so other users can easily find it.

Install Ubuntu 7 on Solaris 10 for Sun Ray Clients

Hello
I have a Sun Fire X2200 whith Sun Ray Server Software 4 installed, the DTUs are already working for the solaris user with the Java Desktop and solaris OS.
But I need install Ubuntu 7 on the solaris 10 OS for the DTU clients can access the Ubuntu OS and not the Solaris 10
Thanks for your help
Diego

Hi,
32-bit SAP and database software is no longer supported as of SAP Kernel 6.20 for AIX, HP-UX and Sun Solaris.
check Note 194885 - End of support for 32-bit SAP Software on Unix
also check service.sap.com/pam
regards,
kaushal

Sun Ray integration with Juniper NAC Client

Similar Messages

Maybe you are looking for