Sun Ultra 24 CPU fan - bogus fail message

I have a Sun Ultra 24. When booting, it says the CPU fan is failing, and wants to shut down. I looked at the system, and this error message appears to be wrong; the fan inside the heatsink mounted on top of the CPU is spinning, as is the case fan.
I saw another post elsewhere here saying that it's a BIOS problem, and that updating the BIOS will help. I tried that, but no dice. Suggestions?
Thanks!
Fredrik

Solved. Using the 1.4 support DVD, I 1) upgraded BIOS, and 2) upgraded the Intel management engine thingy. Then for good measure, I cleared the CMOS.

Similar Messages

CPU Fan Has Failed! PC will automatically power down

CPU Fan Has Failed! PC will automatically power down
HP Pavilion Slimline s3714uk Desktop PC, running windows 7.
I started to get CPU fan failure message and the PC would not boot, I opened up the case and the CPU fan seems to be connected and working.
Error message is “"ERROR: CPU Fan Has Failed! PC will automatically power down in a few seconds. Service the PC immediately to prevent damage to the PC."
I have found the following advice:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00013522&cc=uk&lc=en&dlc=en&product=3876701
However the bios version I have does not have the option to switch off the fan monitor. How can I fix this issue please: many thanks

Hi Susielee. what was the heat sink and cpu fan that the tech installed in your HP computer? I got a used HP s5120y computer from a longtime friend that is missing a processor fan but the heatsink is there.
update 2/14: never mind, my old friend forgot to give me the CPU fan, which he did a few days ago. I used a flashlight to check if the fan is working and it is but I'm still getting "CPU fan has failed" error everytime I power on the computer but the cpu fan spins okay at normal speed. replacing the cmos battery did nothing to solve the problem.
I will either replace the whole heatsink & fan before I will consider replacing the motherboard, which seem to have a least 1 ruptured capacitor on the board - that indicates some parts of the motherboard are starting to fail, like the fan sensors. The HP part number of the board printed on a sticker in the HP slimline S5120Y computer is "513426-001"
So in short replace the heatsink & fan assembly first. Then replace either the power supply and chassis fans. If those don't fix the CPU fan failed message at bootup, replace the whole motherboard.

SUN ULTRA 45 fan to loud

It's posible to set a limit of the rpm of the fan or to set a variable rpm adjustment.
I have a SUN ULTRA 45 Workstation and my Problem is: when the fan is turn on only with maximum rpm.
The processor is to 10% used to capacity. The fan runns one minute and than stopt. 5 minutes late the same...
This fan is extrem loud, this isn't practicable in my office.

Yes : you need two little cables and a Sun .pkg software called fanctl. The cable installation on the motherboard is relatively easy, you can make that yourself. The soft needs no any parametrage, it works automatically after installation (pkgadd).
To obtain both cables + fanctl, the only way i know is to open a thread by the hotline of your country. Hopefully is your woikstation under garanty, otherwise maybe it's possible to get both paying ?

KT4 ULTRA : CPU fan & AGP mode

Hello,
I have 2 problems :
1)Each first starting of my computer, there is 6 or 8 rings and it's written :
CPU fan isn't running? Y/N
In reality, the fan is running correctly, but it is thermoregulated.
This fan is connected to CFAN1 and I have another fan system in NBFAN1
Do you have a solution for this problem?
2)In my KT4 MS-6590 V1.0, I have the last VIA Chipset Drivers 4.51 and I have a new graghic card Hercules 3D Prophet 9600SE.
In the Bios, AGP MODE is in AUTO (grey), I can't change.
In reality, I saw it's AGP*2 or AGP*4, but not *8.
The informations in the Bios AGP Timing Control are :
AGP MODE : Auto
AGP Fast write : Enabled
AGP Aoerture Size : 256MB
AGP Master 1 W/SWrite : Disabled
AGP Master 1 W/SRead : Disabled
AGP Read Synchronization: Disabled
Can you tell me the reason why I can't affect 8 for AGP MODE
Thanks for your answer
Giro
WIN2K PRO SP4
KT4 ULTRA - MS-6590 V1.0
Hercules 3D Prophet 9600SE 128Mo (Driver Catalyst 4.1)
512Mo DDR-SDRAM

Thanks for your answers.
Richard_2003, you are right, in the control panel, it's running at 8x.
OK for the mode "AUTO" in the Bios.
For the fan, it's good like this
Giro

"CPU Fan has failed"

I keep getting this message when I turn on my pc. It says "Fan CPU has failed. Your computer will shut down" and then it shuts off.
Sometimes I get it once a week and then sometimes it goes 2 weeks before it happens. How do I fix this problem?
My pc: Compaq Presario SR1020V (PU165AV)
WinXP SP 3 IE8

You said "Fan was just replaced ......". What is the rated RPM of this fan? What is the model # of your computer.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

"cpu fan not functioning. check fan connections and call for service."

wondered if a different failure than than "CPU fan has failed ... system will shutdown in a few seconds". I have a DX-2000 P4 desktop running XP SP3 which I just changed motherboard and CPU fan on. All fans are spinning at close to same speed. (P/S,Chassis and CPU). Not extremely fast but cant see vanes. Computer has sat for several years. Wondered what the actual test is and how fan speed is regulated. I guess temperature sensors are built into the cpu, somehow there must be a varying voltage applied to fans to change their speed and/or a measuring device to see what their rpm is. This must be controlled by the BIOS as the whole pass/fail test is. My next step is to put back the old fan and see what happens. I have a new p/s to install should be here today. Actually used but cleaned and tested. Saving a cleaning chore. Not sure if my older supply might be causing the issue with low volts.
This question was solved.
View Solution.

If the fan is slower than the factory fan you will have that problem.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

KT333 - KT3 Ultra MS-6380E CPU FAN PROBLEMS

Yesterday I installed my new motherboard:
Athlon XP2000+
KT333 - KT3 Ultra MS-6380E
256Mb DDR RAM Running at 266Mhz
MSI Geforce 4 Ti4200 64Mb DVI TV AGP Graphics
Everything was installed correctly and when I switched on my pc, the bios was reporting CPU FAN not running.
I checked my connection on the motherboard and it was correctly connected up to CFAN1.
After playing around abit, I tried connecting this to PSFAN1 and the FAN started spinning but the problem was still there.
Why does my motherboard Fan on CFAN1 not spin??? But spins on PSFAN1??
When my fan was on PSFAN1 it was also fluctuating but i guess thats because of my PSU which is 230 Watts (which i am going to upgrade today to 300W or 400W.
Also with kit installed how can i set up my bios to run at its best?????!?!?
Please help...
Mits

Hi,
You probably have a high-speed-fan, and you blown the fan-header of the motherboard....
Fan's like these need to be connected to the powersupply directly and only connect the sensor wire to the motherboard....

Sun Ultra 20 M2 fails to boot if an USB storage device is plugged in

Hi.
If any of my LaCie external USB disks are plugged in my Sun Ultra 20 M2, BIOS hangs and fails to boot. Bios is upgraded with latest version (Tools and drivers CD v. 1.6a). Furthermore, my LaCie mobile disk is listed on Solaris HCL.
LaCie Lacie Mobile Hard Drive 250 GB
Any hint on how to troubleshoot this issue?
Thanks,
Enrico.

I indeed each a test with every USB device I could collect, including keyboards, and I did have the same problems with others disks, although no one with other kind of hardware.
Not being a problem of my disk, is it possible to file a bug for a workstation BIOS?
Thanks,
Enrico,

I'm getting a Plugged in, not charging message after replacing the CPU fan

I just replaced the CPU fan on this notebook last night and finished it today. Its running perfectly at the moment.
The problem is the windows Task bar on my desktop says "Plugged in, not charging" when I mouse over the battery indicator there. I've tried many things to fix it, from uninstalling or disabling the drivers for the devices involved (the ACPI battery and AC adapter) under Windows' device manager, to swapping out with my spare battery.
I've also switched power plans on the off chance that could have been causing some kind of battery charging setting. This did not fix it. The AC adapter works. I've been running this notebook for about two hours now searching for a solution, it just won't charge the battery. I've not tried observed it enough but I believe it will charge while powered off, but not while on. The orange LED indicator by the AC adapter port glows when the machine is off, indicating that it is charging.
I have a feeling the whole "uninstall device drivers for the battery devices" idea is a thing of the past. Everything I found which suggested doing that also mentioned Windows Vista, which at this point in time is a relic (July 2015). When I was replacing the CPU fan, it did get frustrating at times but everything is intact apart from some case clips and a few other plastic case parts. I have reason to believe everything is connected too because its still powered on, meaning its getting power, but it isn't going in to the battery.
Symptom summary:
Batteries: OKAC Adapter: OK
MOBO: PROBABLY OK
ME: NOT OK xD

Hey srkv121,
welcome to the forums
On
1. Optimized battery run time, the energy managment completely charges the battery to ensure maximum battery performance
2. On best battery health, energy management charges only 50% of the battery, it ensures maximum battery life but not performance
hope this helps
regards
Lets make 2015 the year of the #DO
Did I or someone help you today? Press the star on the left to thank them with a Kudo!

X48 CPU fan fails to spin

ystem specs:
ThermalTake Tsunami Dream + ThermalTake 850watt PSU
MSI x48 platinum motherboard
intel q9450(1333 mhz FSB, 12mb l2 cache, 2.66 ghz, 45nm micro-architecture)
2gb DDR3 XMS3 Corsair Ram(1333 mhz)
BFG 9600 GT OC
ArcticCooler Freezer 7 Pro
Problem: the CPU fan simply does not want to spin. when booted up, there is no sign of life from the fan itself, even if i go into the bios, disable, or enable the smart fan control, i still get nothing. when enabled i have set it at 40*c, while the CPU temperature is at 50*c, and yet there is still no life from the fan. it is plugged in correctly etc. HOWEVER, when i bypass the motherboard and draw power directly from the power supply, or a 9v battery, the CPU fan spins with no problems, and remains at a constant temperature of 50-53*c. i have read a few article's while googling for a solution suggesting that there isnt enough voltage/current going to the fan itself, im just wondering if there is any way i can change this through the bios, as i have not been enable to install and Operating system in fear of the CPU frying while i am doing so, which would mean i couldn't try controlling the fan in a more software based manner.
if anyone can shed some light on the situation i am currently experiencing it is much appreciated.
//Regards, Griff.

Yea, Freezer 7 pro (64 is the AMD version).
Just noticed something which i completely missed before, is that he had stated that there is no sysfan3 header, yet it listed on the manual and should be to the bottom left of the cpu socket next to sysfan 1 (3pin)
Im wondering if he has a v3 board as the pics im finding of v1 show the sockets as per the manual but i just found a pic of a v3 board with only the 1 header in the right area.
Elliot, can you check if, where the heatpipes turn towards the top of the board, how many header points are there, and between the pci and pci-e sockets are, what the text says. does it say X48 platinum v1.0 or v3.0
EDIT!!
nope, must be a V1.
v3 is the X48C

Sun ultra 40 boot problem AMD Opteron

Hi,
my Sun Ultra 40 will not boot, it is an AMD Opteron based machine, the cooling fans are spinning, but there is no msg to read on the monitor.
Occasionally I got it to boot, it ran for two weeks, but at next reboot it displays no signal to the video card.
I spotted this in the manual
===
During POST, the BIOS outputs the error code to I/O port 80h. The workstation
motherboard is equipped with a two segment LED display that displays the current
value of port 80h.
===
but I cannot get the glue in it, maybe because I have opteron AMD and this is targeted to sparc.
Last error msg I read was like this:
===
Phoenix trusted core(TM) server
copyright 1985 - 2004 Phoenix Technologies Ltd.
all rights reserverd
Build Time: 12/19/05 09:46:08
sun ultra 40 workstation BIOS version 1.050
CPU Stepping = E4 2000MHz
MemClk = 200 MHz Tcl=3.0 Trcd = 3 Tras = 8 Trp=3
1023 M System RAM Passed
1024 K cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
ATAPI CD-ROM: MATSHITA DVD-RAM UJ - 845S
Mouse initialized
Kernel Library version:03.00.00.04
Strong ROM Version:03.00
Build:_P
Event log messages, enter setup to view
ERROR
0280: Previous boot incomplete -
Default configuration used
Press <F1> to resume, <F2> to setup
===
what can I do? is the motherboard faulty? How can I get it to boot from CD
and run a system diagnosis?
What mainboard is compatible? should I replace it with a newer mainboard + CPU + RAM?
Will it fit in the Sun Ultra 40 desktop tower?

Hi,
my Sun Ultra 40 will not boot, it is an AMD Opteron based machine, the cooling fans are spinning, but there is no msg to read on the monitor.
Occasionally I got it to boot, it ran for two weeks, but at next reboot it displays no signal to the video card.
I spotted this in the manual
===
During POST, the BIOS outputs the error code to I/O port 80h. The workstation
motherboard is equipped with a two segment LED display that displays the current
value of port 80h.
===
but I cannot get the glue in it, maybe because I have opteron AMD and this is targeted to sparc.
Last error msg I read was like this:
===
Phoenix trusted core(TM) server
copyright 1985 - 2004 Phoenix Technologies Ltd.
all rights reserverd
Build Time: 12/19/05 09:46:08
sun ultra 40 workstation BIOS version 1.050
CPU Stepping = E4 2000MHz
MemClk = 200 MHz Tcl=3.0 Trcd = 3 Tras = 8 Trp=3
1023 M System RAM Passed
1024 K cache SRAM Passed
System BIOS shadowed
Video BIOS Shadowed
ATAPI CD-ROM: MATSHITA DVD-RAM UJ - 845S
Mouse initialized
Kernel Library version:03.00.00.04
Strong ROM Version:03.00
Build:_P
Event log messages, enter setup to view
ERROR
0280: Previous boot incomplete -
Default configuration used
Press <F1> to resume, <F2> to setup
===
what can I do? is the motherboard faulty? How can I get it to boot from CD
and run a system diagnosis?
What mainboard is compatible? should I replace it with a newer mainboard + CPU + RAM?
Will it fit in the Sun Ultra 40 desktop tower?

Solaris 8 SPARC SUN ULTRA 10 - WP event on CPU0

Hii everyone
My Server SUN 5.8 has rebooted itself after having been generated internally out of the ordinary events related to CPU.
The log en the file.messages and output of prtdiag is:
{color:#ff0000}Apr 15 21:20:10 server1 SUNW,UltraSPARC-IIi: [ID 727863 kern.warning] WARNING: [AFT1] WP event on CPU0, errID 0x000091eb.e4c47547{color}
{color:#ff0000}Apr 15 21:20:10 server1 AFSR 0x00000000.00800040<WP> AFAR 0x000001ff.dbfffdd8{color}
{color:#ff0000}Apr 15 21:20:10 server1 AFSR.PSYND 0x0040(Score 95) AFSR.ETS 0x00 Fault_PC 0x4e3a98{color}
{color:#ff0000}Apr 15 21:20:10 server1 UDBH 0x0000 UDBH.ESYND 0x00 UDBL 0x0000 UDBL.ESYND 0x00{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 836849 kern.notice] {color}
{color:#ff0000}Apr 15 21:20:10 server1 ^Mpanic[cpu0]/thread=30001d205a0: {color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 401469 kern.notice] [AFT1] errID 0x000091eb.e4c47547 WP Error(s){color}
{color:#ff0000}Apr 15 21:20:10 server1 See previous message(s) for details{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 100000 kern.notice] {color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 723222 kern.notice] 000002a10091d6c0 SUNW,UltraSPARC-IIi:cpu_aflt_log+4e0 (2a10091d77e, 1, 10143958, 2a10091d908, 2a10091d7cb, 10143980){color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 179002 kern.notice] %l0-3: 0000000000000001 000002a10091d9e0 0000000000000003 0000000000000010{color}
{color:#ff0000}Apr 15 21:20:10 server1 %l4-7: 0000000000000001 00000000845d5bc0 0000000084407f7c 0000000000000000{color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 723222 kern.notice] 000002a10091d910 SUNW,UltraSPARC-IIi:cpu_async_error+7dc (1, 1ffdbfffdd8, 800040, 0, 0, 0){color}
{color:#ff0000}Apr 15 21:20:10 server1 genunix: [ID 179002 kern.notice] %l0-3: 0000000000000000 0640000000800040 0000000000000000 0000000000800040{color}
{color:#ff0000}Apr 15 21:20:10 server1 %l4-7: 000002a10091d9e0 000002a10091dba0 0000000000000000 0000000000000000{color}
{color:#ff0000}Apr 15 21:20:10 server1 unix: [ID 100000 kern.notice]{color}
Apr 15 21:20:10 server1 genunix: [ID 672855 kern.notice] syncing file systems...
Apr 15 21:20:10 server1 genunix: [ID 733762 kern.notice] 6
Apr 15 21:20:11 server1 genunix: [ID 733762 kern.notice] 3
Apr 15 21:20:12 server1 genunix: [ID 904073 kern.notice] done
Apr 15 21:20:13 server1 genunix: [ID 353387 kern.notice] dumping to /dev/dsk/c0t0d0s1, offset 107479040
Apr 15 21:20:24 server1 genunix: [ID 409368 kern.notice] ^M100% done: 13157 pages dumped, compression ratio 3.21,
Apr 15 21:20:24 server1 genunix: [ID 851671 kern.notice] dump succeeded
Apr 15 21:21:08 server1 genunix: [ID 540533 kern.notice] ^MSunOS Release 5.8 Version Generic_108528-09 64-bit
Apr 15 21:21:08 server1 genunix: [ID 913631 kern.notice] Copyright 1983-2001 Sun Microsystems, Inc. All rights reserved.
Apr 15 21:21:08 server1 genunix: [ID 678236 kern.info] Ethernet address = 0:3:ba:c:c6:5e
Apr 15 21:21:08 server1 unix: [ID 389951 kern.info] mem = 1048576K (0x40000000)
Apr 15 21:21:08 server1 unix: [ID 930857 kern.info] avail mem = 1027547136
Apr 15 21:21:08 server1 rootnex: [ID 466748 kern.info] root nexus = Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
Apr 15 21:21:08 server1 rootnex: [ID 349649 kern.info] pcipsy0 at root: UPA 0x1f 0x0
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] pcipsy0 is /pci@1f,0
Apr 15 21:21:08 server1 pcipsy: [ID 370704 kern.info] PCI-device: pci@1,1, simba0
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] simba0 is /pci@1f,0/pci@1,1
Apr 15 21:21:08 server1 pcipsy: [ID 370704 kern.info] PCI-device: pci@1, simba1
Apr 15 21:21:08 server1 genunix: [ID 936769 kern.info] simba1 is /pci@1f,0/pci@1
Apr 15 21:21:18 server1 simba: [ID 370704 kern.info] PCI-device: ide@3, uata0
Apr 15 21:21:18 server1 genunix: [ID 936769 kern.info] uata0 is /pci@1f,0/pci@1,1/ide@3
Apr 15 21:21:18 server1 uata: [ID 114370 kern.info] dad0 at pci1095,6460
Apr 15 21:21:18 server1 uata: [ID 347839 kern.info] target 0 lun 0
Apr 15 21:21:18 server1 genunix: [ID 936769 kern.info] dad0 is /pci@1f,0/pci@1,1/ide@3/dad@0,0
Apr 15 21:21:19 server1 dada: [ID 365881 kern.info] <ST320414A cyl 39533 alt 2 hd 16 sec 63>
Apr 15 21:21:19 server1 uata: [ID 114370 kern.info] dad1 at pci1095,6460
Apr 15 21:21:19 server1 uata: [ID 347839 kern.info] target 1 lun 0
Apr 15 21:21:19 server1 genunix: [ID 936769 kern.info] dad1 is /pci@1f,0/pci@1,1/ide@3/dad@1,0
Apr 15 21:21:20 server1 dada: [ID 365881 kern.info] <Maxtor 6E040L0 cyl 19156 alt 2 hd 16 sec 255>
Apr 15 21:21:20 server1 swapgeneric: [ID 308332 kern.info] root on /pci@1f,0/pci@1,1/ide@3/disk@0,0:a fstype ufs
Apr 15 21:21:20 server1 simba: [ID 370704 kern.info] PCI-device: ebus@1, ebus0
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] power0 at ebus0: offset 14,724000
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] power0 is /pci@1f,0/pci@1,1/ebus@1/power@14,724000
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] su0 at ebus0: offset 14,3083f8
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] su0 is /pci@1f,0/pci@1,1/ebus@1/su@14,3083f8
Apr 15 21:21:20 server1 ebus: [ID 521012 kern.info] su1 at ebus0: offset 14,3062f8
Apr 15 21:21:20 server1 genunix: [ID 936769 kern.info] su1 is /pci@1f,0/pci@1,1/ebus@1/su@14,3062f8
Apr 15 21:21:21 server1 rootnex: [ID 349649 kern.info] ffb0 at root: UPA 0x1e 0x0
Apr 15 21:21:21 server1 genunix: [ID 936769 kern.info] ffb0 is /SUNW,ffb@1e,0
Apr 15 21:21:21 server1 unix: [ID 987524 kern.info] cpu0: SUNW,UltraSPARC-IIi (upaid 0 impl 0x12 ver 0x91 clock 440 MHz)
Apr 15 21:21:21 server1 ebus: [ID 521012 kern.info] se0 at ebus0: offset 14,400000
Apr 15 21:21:21 server1 genunix: [ID 936769 kern.info] se0 is /pci@1f,0/pci@1,1/ebus@1/se@14,400000
Apr 15 21:21:22 server1 hme: [ID 517527 kern.info] SUNW,hme0 : PCI IO 2.0 (Rev Id = c1) Found
Apr 15 21:21:22 server1 simba: [ID 370704 kern.info] PCI-device: network@1,1, hme0
Apr 15 21:21:22 server1 genunix: [ID 936769 kern.info] hme0 is /pci@1f,0/pci@1,1/network@1,1
Apr 15 21:21:25 server1 genunix: [ID 454863 kern.info] dump on /dev/dsk/c0t0d0s1 size 512 MB
Apr 15 21:21:26 server1 hme: [ID 517527 kern.info] SUNW,hme0 : Internal Transceiver Selected.
Apr 15 21:21:26 server1 hme: [ID 517527 kern.info] SUNW,hme0 : Auto-Negotiated 100 Mbps Half-Duplex Link Up
Apr 15 21:22:36 server1 pseudo: [ID 129642 kern.info] pseudo-device: devinfo0
Apr 15 21:22:36 server1 genunix: [ID 936769 kern.info] devinfo0 is /pseudo/devinfo@0
Apr 15 21:23:36 server1 named[184]: [ID 295310 daemon.notice] starting. in.named BIND 8.2.2-P5 Wed Jan 15 04:35:48 PST 2003
Apr 15 21:23:36 server1 Generic Patch-5.8-January 2003
Apr 15 21:23:37 server1 named[221]: [ID 295310 daemon.notice] Ready to answer queries.
Apr 15 21:23:37 server1 named[221]: [ID 295310 daemon.warning] check_hints: A records for L.ROOT-SERVERS.NET class 1 do not match hint records
Apr 15 21:23:38 server1 savecore: [ID 570001 auth.error] reboot after panic: [AFT1] errID 0x000091eb.e4c47547 WP Error(s)
Apr 15 21:23:38 server1 See previous message(s) for details
Apr 15 21:23:57 server1 pseudo: [ID 129642 kern.info] pseudo-device: tod0
Apr 15 21:23:57 server1 genunix: [ID 936769 kern.info] tod0 is /pseudo/tod@0
Apr 15 21:23:57 server1 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 15 21:23:57 server1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
Apr 15 21:23:59 server1 pseudo: [ID 129642 kern.info] pseudo-device: vol0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] vol0 is /pseudo/vol@0
Apr 15 21:23:59 server1 scsi: [ID 365881 kern.info] /pci@1f,0/pci@1/scsi@1 (glm0):
Apr 15 21:23:59 server1 Rev. 6 Symbios 53c875 found.
Apr 15 21:23:59 server1 scsi: [ID 365881 kern.info] /pci@1f,0/pci@1/scsi@1 (glm0):
Apr 15 21:23:59 server1 glm0 supports power management.
Apr 15 21:23:59 server1 simba: [ID 370704 kern.info] PCI-device: scsi@1, glm0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] glm0 is /pci@1f,0/pci@1/scsi@1
Apr 15 21:23:59 server1 scsi: [ID 193665 kern.info] sd0 at uata0: target 2 lun 0
Apr 15 21:23:59 server1 genunix: [ID 936769 kern.info] sd0 is /pci@1f,0/pci@1,1/ide@3/sd@2,0
Apr 15 21:24:02 server1 pseudo: [ID 129642 kern.info] pseudo-device: fcode0
Apr 15 21:24:02 server1 genunix: [ID 936769 kern.info] fcode0 is /pseudo/fcode@0
Apr 15 21:24:06 server1 ebus: [ID 521012 kern.info] fd0 at ebus0: offset 14,3023f0
Apr 15 21:24:06 server1 genunix: [ID 936769 kern.info] fd0 is /pci@1f,0/pci@1,1/ebus@1/fdthree@14,3023f0
Apr 15 21:24:26 server1 pseudo: [ID 129642 kern.info] pseudo-device: pm0
Apr 15 21:24:26 server1 genunix: [ID 936769 kern.info] pm0 is /pseudo/pm@0
================================= *{color:#0000ff}DATOS DE DIAGNOSTICO{color}* ============================================
server1 ROOT [9] psrinfo -v
Status of processor 0 as of: 04/16/08 09:45:18
Processor has been on-line since 04/15/08 21:21:20.
The sparcv9 processor operates at 440 MHz,
and has a sparcv9 floating point processor.
server1 ROOT [10]
server1 ROOT [9] uname -a
SunOS server1 5.8 Generic_108528-09 sun4u sparc SUNW,Ultra-5_10
server1 ROOT [19] /usr/platform/sun4u/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 scsi-glm Symbios,53C875
Bus Freq
Brd Type MHz Slot Name Model
0 UPA 110 30 FFB, Double Buffered SUNW,501-4788
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
Cheerio: ebus Rev 1
FFB Hardware Configuration:
Board rev: 2
FBC version: 0x3241906d
DAC: Brooktree 9070, version 1
3DRAM: Mitsubishi 130b, version 2
System PROM revisions:
OBP 3.29.0 2000/12/20 18:45 POST 3.1.0 2000/06/27 13:56
=== *{color:#0000ff}SECOND TEST{color}*
server1 ROOT [4] /usr/platform/`uname -i`/sbin/prtdiag -v
System Configuration: Sun Microsystems sun4u Sun Ultra 5/10 UPA/PCI (UltraSPARC-IIi 440MHz)
System clock frequency: 110 MHz
Memory size: 1024 Megabytes
========================= CPUs =========================
Run Ecache CPU CPU
Brd CPU Module MHz MB Impl. Mask
0 0 0 440 2.0 12 9.1
========================= IO Cards =========================
Bus# Freq
Brd Type MHz Slot Name Model
0 PCI-1 33 1 ebus
0 PCI-1 33 1 network-SUNW,hme
0 PCI-1 33 2 SUNW,m64B ATY,GT-C
0 PCI-1 33 3 ide-pci1095,646.1095.646.3
0 PCI-2 33 1 scsi-glm Symbios,53C875
Bus Freq
Brd Type MHz Slot Name Model
0 UPA 110 30 FFB, Double Buffered SUNW,501-4788
No failures found in System
===========================
========================= HW Revisions =========================
ASIC Revisions:
Cheerio: ebus Rev 1
FFB Hardware Configuration:
Board rev: 2
FBC version: 0x3241906d
DAC: Brooktree 9070, version 1
3DRAM: Mitsubishi 130b, version 2
System PROM revisions:
OBP 3.29.0 2000/12/20 18:45 POST 3.1.0 2000/06/27 13:56
============================================
I don't know exactly what is the origin of the problem, How to solver or how to prevent to avoid further problems. This is the first time I have had this Kind of problem on my Server SUN.
I appreciate greatly, any tip o help.
Jimmy

Yup.
EOL in November 2002
Which means EOSL November 2007
http://sunsolve.sun.com/handbook_pub/validateUser.do?target=Systems/U10/U10
Unless you've somehow maintained a service contract on that system,
by specific system serial number,
your best bet is to haunt an online auction site (such as Ebay),
and get a replacement cpu or cpus for shelf stock.
Your current OBP patch level is only down two patch levels,
but your kernel patch level is essentially "never patched".
If it were patched better it may have noticed the issue a lot sooner.
Expect to replace that cpu.

Solaris 2.6 upgrade to version 8 on SUN ULTRA 10

Dear Mr. or Mrs:
I met the same question as uxdms who left the message on Dec 20,2001.
When I was trying to upgrade from solaris 2.6 to 8 release , there is "failed" warning and the upgrade isn't created.
There is a detailed info:
Mechine: SUN ULTRA 10
Media:
Solaris 8 installation -- SPARC Platform Edition
Solaris 8 software 1 of 2 -- SPARC Platform Edition
Solaris 8 software 2 of 2 -- SPARC Platform Edition
Installation step:
Accordidng to the guide of installation, run step by step,
and there are some special steps below:
(1) use the /dev/dsk /c0t0d0s4 as disk slice to upgrade.
(2) selet networked
(3) don't use DHCP
(4) disable IPv6
(5) no NIS+, NIS, DNS ..
.... displaying the wolcome to solaris dialog box
(1) Solaris 8 installation SPARC Platform Edition is ejected.
(2) prompted to insert the Solaris 8 software 1 of 2.
(3)After selecting serial the dialog box of the upgrade..
(4)system prompted upgrading...
initialation is done.
Checking file system is done.
(5) There is a installation summary displayed:
installation summary
The solaris installation status is shown below
product status infor.
Solaris 8 software Failed Detailed(button)
After click the Detailed button, there is a dialog box
Failed:
Log file: /a/var/sadm.system/logs/upgrade_log
Question is:
I can't find the file of upgrade_log , and the webstart install stops on it.
I appreciate for your kind help
Melanie
the webstart install stops on initalization -- with 'failed' warning

Hi,
If this problem is reproduceable, provide me the exact console error (failed) message to further investigate on this issue.
Senthilkumar
Developer Technical Support
Sun Microsystems, Inc.
http://www.sun.com/developers/support

Sun Ultra 10 with SunStorEDGE A1000/D1000 unable to setup

I realise this covers old ground but I have not been able to trace a uitable resolvement and would be grateful for assistance.
I have a Sun Ultra 10 with 256MB RAM and 440GHz cpu.. It has a pci Adaptec 2944UW HVD SCSI interface card. The storage system is a tray of eight scsi 72GB disks housed in a D1000 case. NetBSD reported it as an A1000 SunStorEDGE at sd0 having 16 targets and 8 luns. However NetBSD did not have a readily available controller to setup the raid system so I installed an alternative. I presume the case is a reused old case housing an A1000 unit.
I tried to format the drives directly but they are not lists as devices such as ct1sd1 etc. and so this is not possible.
I have installed Sun Solaris 10 but could not communicate and reported inability to use rdriver and rdnexus and after reading a number of reports that driver hooks had been removed from the kernel in Solaris 10 I have installed Solaris 9.
On both occasions I installed a number of RAID Manager 6.1.1 control packs, namely SUNWosafw, osar, osau, osamn and vtsse direct from my CD here.
I commanded dr_hotadd.sh to take up the challenge but it failed to communicate.
I added a number of Rdac amendments to rparams in /etc/osa but this did not resolve the issue.
I have tried to call probe-scsi-all after doing a reset-all from the OBP but this fails to report anything. I presume this is because the unit is connected by the interface card rather than a direct scsi disk.
dmesg pipe grep scsi reports:
unknown scsi sd0 at uata0 target 2 lun 0
I would be very grateful fr guidance to resolve this connection so that I can create a suitable filestore.
Thanks
c

blackfoot wrote:
I realise this covers old ground but I have not been able to trace a uitable resolvement and would be grateful for assistance.
I have a Sun Ultra 10 with 256MB RAM and 440GHz cpu.. It has a pci Adaptec 2944UW HVD SCSI interface card. The storage system is a tray of eight scsi 72GB disks housed in a D1000 case. NetBSD reported it as an A1000 SunStorEDGE at sd0 having 16 targets and 8 luns. However NetBSD did not have a readily available controller to setup the raid system so I installed an alternative. I presume the case is a reused old case housing an A1000 unit.If it's really an A1000, you won't have access to the drives. You'll only see exposed LUNS from the raid controller. Do you have a dial in the rear with a scsi address? That will be the address that the A1000 will respond on. In addition, the A1000 has only one pair of SCSI ports. The D1000 has two pair and doesn't have the scsi adress dial (because each of the disks in the chassis respond on their own addresses). Instead you have some DIP switches to change the addressing behavior.
I tried to format the drives directly but they are not lists as devices such as ct1sd1 etc. and so this is not possible.
I have installed Sun Solaris 10 but could not communicate and reported inability to use rdriver and rdnexus and after reading a number of reports that driver hooks had been removed from the kernel in Solaris 10 I have installed Solaris 9.That's fine. You can ignore them. Neither the A1000 nor D1000 require those drivers. You should still be able to use 'rm6' or the CLI tools to interact with an A1000.
On both occasions I installed a number of RAID Manager 6.1.1 control packs, namely SUNWosafw, osar, osau, osamn and vtsse direct from my CD here.
I commanded dr_hotadd.sh to take up the challenge but it failed to communicate.
I added a number of Rdac amendments to rparams in /etc/osa but this did not resolve the issue.
I have tried to call probe-scsi-all after doing a reset-all from the OBP but this fails to report anything. I presume this is because the unit is connected by the interface card rather than a direct scsi disk.If the controller doesn't support the OBP environment, then yes, you won't see anything then.
dmesg pipe grep scsi reports:
unknown scsi sd0 at uata0 target 2 lun 0So that might be a single LUN from an A1000 controller. If the selector switch in the back is set to '2', then it's even more likely.
Darren

Installing Windows Server 2008 on Sun Ultra 24

I have a Sun Ultra 24 that I previously had Windows Server 2003 64 bit installed and working fine.
I am going through the process to install Windows Server 2008 R2 64 bit, and it is failing at the last step of completing the install, saying that windows failed to install components.
Prior to installing, I loaded the drivers for Intel ICH9 SATA AHCI Controller from my Drivers and Tools 1.4 disk and formatted the drive that was previously used. I am not attempting to install RAID and there are no additional hardware components in my system.

when restaring the windows after that it give me the below message in the attached image from the KVM consol

Sun Ultra 24 CPU fan - bogus fail message

Similar Messages

Maybe you are looking for