Sun VM VS Microsoft VM... HELP ME PLEASE!

Iv'e developed an applet with Java JDK 1.5. This applet works fine when i select "Sun 1.5 VM" as my favourite VM.
Now, i've to use in the same computers another applet, not written by me, that work well on Microsoft Virtual Machine, but not with the Sun VM.
Obviously my applet doesn't work with the VM of Microsoft that use JDK 1.1.
I can modify the html code of the old Applet (i haven't its source code!), my applet source and the html code.
What can I do?
Please Help me... i'm in despair!
Ps: excuse me for my bad english... :(

You can't modify the html? Yes, I can. I haven't the Old Applet source code, but i CAN modify the html.
If you can modify the html then there is a way to
specify how an applet is run. I have no idea how to
do that but someone in the GUI forums would know.I hope i'll find it... i'm going to search!
Somebody remember something?

Similar Messages

Been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft? Help me please.. getting a bit bored?

been sat here for the past 5 hours trying to figure out why itunes wont download, it says error and something to do with Microsoft version? Help me please.. getting a bit bored?

i have this problem too
my dad thinks its because itunes is getting overloaded

Where has my Microsoft Word gone ? I had my Mac wiped at the genius bar and backed it up on a hard drive now i can not find it anywhere !!! HELP me please :/

Hello all,
I had my Mac wiped at the genius bar and backed it up on a hard drive,
but now i can not find it anywhere !!! HELP me please :/

Take your comp back to the repair shop along w/your receipt for proof that MW was purchased. Either they need to find/restore it back to your comp or reimburse you.

Help required please. "Itunes can not read the contents of my iphone"

Greetings all,
I know this question has been asked before and I apologize for asking again but all the solutions provided don't seam to work for me, can anyone help me please.
I am receving the message: "Itunes can not read the contents of the iPhone. Go to the summary tab In iPhone Preferences and click restore torestore this Iphone to factory settings".
Now a little about my iphone, Itunes and my laptop and what steps i havealready tried.
I have an iPhone 4 running software 5.0
My itunes version is 10.5.0.142
I know these are not the most up to date versions but I have had this issue for almost 3 months now and updating the software back then was the first step I tried. I don’t believe updating to the latest will fix this issue as updating the last two times did nothing.
Every so often after starting Itunes, The program will stop responding and will require the three finger death kill (CTRL, ALT, DELETE) to open task manager to end the task of Itunes. Once it shuts down, I restart the iTunes and it runs smoothly, apart from not reading my iPhone.
When I run a diagnostic in itunes under the help tab, I get these fail messages:
Network Connectivity test: Secure link to Itunes store fail
Device connectivity test: Under support services: Itunes helper is not running. And under ports: No iPod, iPhone or iPad found.
Device Sync test: No iPod touch, iPhone or iPad found.
*See below for full diagnostic report*
I have restored back to factory settings twice.
I have shut down and restarted both my iPhone and laptop.
I am running Windows 7 32-bit on my laptop.
I am using ZoneAlarm as my fire wall, and have been disabling it when syncing my iPhone to prevent other error messages.
The iPhone is plugged into a genuine Iphone USB cable and is plugged into a USB port not a USB hub on my laptop, I have tried plugging it into all 4 USB ports and this issue still persist. The Cable is less then 5 months old, is not frayed or damaged in any way, have also borrowed 2 other cables from friends and still the same issue.
The iPhone does not even come up in windows explorer as a digital camera.
The iPhone is NOT jailbroken
I do not live close to a so called genius bar, however I have made the journey to them on 3 separate occasions last year when I first received my iPhone for a different issue, the so called genius's could not fix the problem so they just gave me a new (refurbished) iPhone, which did not extend my warranty. I will not be taking the iPhone back to them as I believe they can not resolve many issues, this is why I am reaching out to the power of the people in the wider apple community.
I have read in other forums about ifunbox and other programs for jail broken iPhones to isolate folders “iTunesDB” and "iTunesCDB" and delete them. If this is the issue is there a way to access these files through windows explorer as my iphone is not jailbroken.
I hope I have provided enough information and someone can help me fix this issue. If I have left anything out, please let me know. I thank everyone in advance for your patience and support.
Thanks
Hoggie27
FULL DIAGNOSITC REPORT
Microsoft Windows 7 Home Premium Edition Service Pack 1 (Build 7601)
Hewlett-Packard HP Pavilion dv6 Notebook PC
iTunes 10.5.0.142
QuickTime not available
FairPlay 1.13.35
Apple Application Support 2.1.5
iPod Updater Library 10.0d2
CD Driver 2.2.0.1
CD Driver DLL 2.1.1.1
Apple Mobile Device 4.0.0.96
Apple Mobile Device Driver 1.57.0.0
Bonjour 3.0.0.10 (333.10)
Gracenote SDK 1.9.3.494
Gracenote MusicID 1.9.3.106
Gracenote Submit 1.9.3.136
Gracenote DSP 1.9.3.44
iTunes Serial Number 001BAD14XXXXEA78
Current user is an administrator.
The current local date and time is 2011-11-16 10:04:53.
iTunes is not running in safe mode.
WebKit accelerated compositing is enabled.
HDCP is supported.
Core Media is supported.
Video Display Information
NVIDIA, NVIDIA GeForce GT 230M
**** External Plug-ins Information ****
No external plug-ins installed.
The drive H: Vodafone USB SCSI CD-ROM Rev USB is a USB 1 device.
**** Network Connectivity Tests ****
Network Adapter Information
Adapter Name:    {97524DB0-B9DC-41DB-8AFA-0CE6938F7C95}
Description:    PC
IP Address:    (HAS BEEN REMOVED FOR PERSONAL REASONS)
Subnet Mask:    255.255.255.255
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:    10.143.147.147
        10.143.147.148
Adapter Name:    {BFF0456E-DE42-4FEF-B1FA-1EA1C5EDEE42}
Description:    Vodafone Mobile Broadband Network Adapter (ZTE)
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    No
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Adapter Name:    {D5511FFD-0CA8-4F62-B3CA-E90384FFCD03}
Description:    Broadcom 43225 802.11b/g/n
IP Address:    0.0.0.0
Subnet Mask:    0.0.0.0
Default Gateway:    0.0.0.0
DHCP Enabled:    Yes
DHCP Server:
Lease Obtained:    Thu Jan 01 11:00:00 1970
Lease Expires:    Thu Jan 01 11:00:00 1970
DNS Servers:
Active Connection:    PC
Connected:    Yes
Online:        Yes
Using Modem:    Yes
Using LAN:    No
Using Proxy:    No
SSL 3.0 Support:    Enabled
TLS 1.0 Support:    Enabled
Firewall Information
Windows Firewall is on.
iTunes is NOT enabled in Windows Firewall.
ZoneAlarm Firewall is installed.
Connection attempt to Apple web site was successful.
Connection attempt to browsing iTunes Store was successful.
Connection attempt to purchasing from iTunes Store was successful.
Connection attempt to iPhone activation server was successful.
Connection attempt to firmware update server was unsuccessful.
The network connection timed out.
Connection attempt to Gracenote server was successful.
Last successful iTunes Store access was 2011-11-16 09:59:57.
**** CD/DVD Drive Tests ****
LowerFilters: Afc (1.0.0.2),
UpperFilters: GEARAspiWDM (2.2.0.1),
F: hp CDDVDW TS-L633N, Rev 0300
Drive is empty.
**** Device Connectivity Tests ****
iPodService 10.5.0.142 is currently running.
iTunesHelper is currently not running.
Apple Mobile Device service 3.3.0.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B34. Device is working properly.
Intel(R) 5 Series/3400 Series Chipset Family USB Enhanced Host Controller - 3B3C. Device is working properly.
FireWire (IEEE 1394) Host Controllers:
1394 OHCI Compliant Host Controller. Device is working properly.
Most Recent Devices Not Currently Connected:
iPhone 4 (GSM) running firmware version 5.0
Serial Number:    85107XQLA4S
**** Device Sync Tests ****
No iPod, iPhone, or iPad found.
< Edited By Host >

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

How to set the CLASSPATH for an Sql Server 2005 database... help me please

Hello! Guys I want to access a Sql Server 2005 database from Java.I've downloaded the JDBC 2.0 driver from Microsoft.I've copied the sqljdbc4.jar file to C:\Java\jdk1.6.0_14\db\lib.And I've added this to the classpath C:\Java\jdk1.6.0_14\db\lib\sqljdbc4.jar.The classpath variable is defined as a user variable.Well the point is that I get that nasty exception:Exception in thread "main" java.lang.ClassNotFoundException: com.microsoft.sqlserver.jdbc.SQLServerDriver.So if you know how to help me,please do so.Thank you :)

Hi Timo,
My jdev version is 10.1.3.3.0, this is for R12. By PR i mean to say process request and PFR process form request in the controller.
In the Process request of the controller, i am finding the checkbox bean and assigning the firepartialaction for it.
Later in the process form request for the fired event, i am trying to handle the rendered property of the messagetextinput. Is this a right approach?
my code below
public void processRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processRequest(oapagecontext, oawebbean);
OAApplicationModule oaapplicationmodule = oapagecontext.getApplicationModule(oawebbean);
OAMessageCheckBoxBean oamessagecheckboxbean = (OAMessageCheckBoxBean)oawebbean.findChildRecursive("X_FLAG");
if(oamessagecheckboxbean != null)
oapagecontext.writeDiagnostics(this, "Message check box Bean found:", 1);
FirePartialAction firepartialaction = new FirePartialAction("change");
oamessagecheckboxbean.setAttributeValue(PRIMARY_CLIENT_ACTION_ATTR, firepartialaction);
oamessagecheckboxbean.setFireActionForSubmit("change", null, null, true);
oapagecontext.writeDiagnostics(this, "setting fire event", 1);
public void processFormRequest(OAPageContext oapagecontext, OAWebBean oawebbean)
super.processFormRequest(oapagecontext, oawebbean);
oapagecontext.writeDiagnostics(this, "Inside Process Form Request", 1);
if("change".equals(oapagecontext.getParameter(OAWebBeanConstants.EVENT_PARAM)))
OAMessageTextInputBean bean = (OAMessageTextInputBean)oawebbean.findChildRecursive("X_NUMBER");
if(bean!=null){
bean.setRendered(Boolean.TRUE);}
Thanks,
Malar

BRAND NEW PHONE NOTHING BUT A MESS HELP ME PLEASE

After charging my iPhone (Brand new 16GB 3GS) I go to sync it to my computer. My computer makes the 'ding' noise it does when you plug a USB in but it does it again immediately after.
I FOLLOWED APPLE'S **** INSTRUCTIONS AND I GET THIS:
Below is an example of the full error message this document relates to as given in Microsoft Windows XP.
The software you are installing for this hardware:
<device/driver name>
has not passed Windows Logo testing to verify its compatibility with Windows XP. (Tell me why this testing is important.)
Continuing your installation of this software may impair or destabilize the correct operating of your system either immediately or in the future. Microsoft strongly recommends that you stop this installation now and contact the hardware vendor for software that has passed Windows Logo testing.
*** am I going to do?! Help me please! I spent so much money on this phone for this?!

I get that error ocassionally at the college where I work when we plug USB drives into the workstations. It is an XP error you sometimes get with newer hardware. You can select continue anyway, but I agree with the above poster to check and make sure you have the latest version of iTunes as it has all the latest drivers for the phones. That should solve your issue.

Microsoft !!! please remove stuff which your top specialists are incapable of deploying them so they avoid dealing with them

Microsoft !!! please remove stuff which your top specialists are incapable of deploying them so they avoid dealing with them !!!
have someone deploy SSTP VPN scenario completely ? have you encountered "revocation server offline" annoying error?
have you read microsoft defective chapters which are about PKI & ADCS in MCITP & MCSE books ?
have you read Brian comar books ? have you seen deficiencies in his book ?
we are network trainers. in all killing problem we encounter in PKI scenarios, you don't find any useful thing in MS books. seems they themselves avoid dealing with them because maybe they themselves know thay themselves are unable to deploy what themselves
have been created & delivered.
if you don't believe, begin to deploy the following simple scenario & lok how you will end in the damn error " revocation server offline...."
i have been working on this problem for months but still no result. start deploy it yourself to find what i say.
i have done any suggestion & workaround you may think, so please first deploy it yourself & then if you get result & deployed all steps & it worked, tell me.
before starting any task, first read my previous threat to find out more:
revocation server offline

The way how you ask questions here, how do you expect to get any help here?
Vadims Podāns, aka PowerShell CryptoGuy
My weblog: en-us.sysadmins.lv
PowerShell PKI Module: pspki.codeplex.com
PowerShell Cmdlet Help Editor pscmdlethelpeditor.codeplex.com
Check out new: SSL Certificate Verifier
Check out new:
PowerShell File Checksum Integrity Verifier tool.
do you have dare to test it ? do you have dare to deploy such simple scenario & you will end up in damn " revocation function offline " message.
don't forget that i need to deploy that without deploying OCSP. i want to deploy that by configuring CDP extension of issued certificates.
i have tested any suggestion you may give me. i have spend months on this. damn with windows operation system , such a pure code !

I am a teacher of mathematics and i have a windows pc, but i want to do the next step. I want to buy an iMac. I want to learn how to write mathematical equations and how to do geometrical schema in my documents with iMac. Help me please!!! Thank you very

I am a teacher of mathematics and i have a windows pc, but i want to do the next step. I want to buy an iMac. I want to learn how to write mathematical equations and how to do geometrical schema in my documents with iMac. Help me please!!! Thank you very much!!!

Bonjour VAGRAI
1) To write math expressions in a text :
     — Microsoft Office 2011 etc. for Mac use its included Equation Editor.
     — OpenOffice.org (OOo) and NeoOffice : download free Dmath 3.3.
     — iWork (Pages, Numbers, Keynote), download free MathType 6.7, fully functional for 30 days, then becomes « Lite » for life as good as the Microsoft equation editor ; it’s better than using Grapher’s equation editor (Applications > Utilities) because MathType can be called from Pages and allows editing equations by clicking the math expressions your text (details on MathType website) .
     — Graph.app 2.3 in Mountain Lion is built to draw curves and surfaces from equations, so it uses an equation editor less powerful than mathType, but it’s easier typing expressions. You may get 2D 3D geometrical drawings from clever equations. Suggest a glance at   http://y.barois.free.fr/grapher/ to know all about Grapher (83 pages Instructions for Use - Grapher) and some examples
2) Geometrical schema :
     — GeoGebra is very popular and used by math teachers.
     — Google SketchUp 8 was not built for mathematics but for architecture, but it’s very easy using it to draw 2D 3D surfaces and solid figures.
     — ShapeOnYou.app allows simples geometrical figures http://pierre.chachatelier.fr/programmation/shapeonyou_en.php
3) Some useful websites for screen shots of geometrical schema :
     http://www.mathcurve.com/
     http://perso.orange.fr/roger.assouly/
Drawings files PDF, TIFF, JPG … can be inserted in an iWork window (Pages).
I hate LaTex : not necessary to write math books !
Au revoir VAGRAI,
YB24
Attachment : lines and curves were made with Google SketchUp 8, screen copied (Command-Shift-4), inserted on a Pages sheet to add letters figures rectangles title.
SketchUp allows drawing precisely an arc of circle 325 mm radius 22,5° angle for instance.

Sound trouble need help urgent please

Could somebody tell me how i can fix my problem.
problem: when my curve 8520 is in silence profile en i start typing in a phnoe number i hear nothing,
but when my phone is in normal profile i hear i beep with every number of the phone number i enter.
so i want to know how i can stop my bb from making this noise

My friend it is a fillable form, can i email you the pdf that iam trying to fill out? then would you be able to tell me how to do it please mate?
I have attached the form, i need to fill in those boxes so that everything is accuratly height + spacing is correct, and to do it fast, thats all im after.
Date: Sun, 27 Jun 2010 18:31:58 -0600
From: [email protected]
To: [email protected]
Subject: Need Help Urgent Please
If is a fillable form, just tab to the next field. What we do not understand from you is IF it is a fillable form or not. If it is not, then the 3 options I gave can be used. Placing text is always a problem. You might find it useful to turn on the grid to help in placing your typewriter fields. However, if it is fillable you do not have to create any fields to type in, you just leave the tool as the hand tool and select the predefined fields with the cursor or the tab key and type accordingly. If the field is a checkbox, then you just use the space key to activate it.
So, are we talking about a fillable form or something that has the appearance of a form, but not fields to fill in. This is what Bernd has been try to find out and you keep suggesting it is fillable as we read what you have said.
>

Differences between Sun JVM and Microsoft JVM.

Differences between Sun JVM and Microsoft JVM.
I have a very simple applet that I am trying to make compatible with both Microsoft�s JVM and Suns JVM in Internet Explorer.
However, when I turn on the Sun JVM it works occasionally, but frustratingly on most occasions I get the following error messages:
In the status bar: "Applet <name> notinited"
And when I investigate further in the console I get the following output:
load: class <name>.class not found.
java.lang.ClassNotFoundException: <name>.class
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.net.SocketException: Malformed reply from SOCKS server
     at java.net.SocksSocketImpl.readSocksReply(Unknown Source)
     at java.net.SocksSocketImpl.connect(Unknown Source)
     at java.net.Socket.connect(Unknown Source)
     at sun.net.NetworkClient.doConnect(Unknown Source)
     at sun.plugin.net.protocol.http.HttpClient.doConnect(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient$3.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.net.www.http.HttpClient.privilegedOpenServer(Unknown Source)
     at sun.net.www.http.HttpClient.openServer(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.net.www.http.HttpClient.<init>(Unknown Source)
     at sun.plugin.net.protocol.http.HttpClient.<init>(Unknown Source)
     at sun.plugin.net.protocol.http.HttpClient.New(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.createConnection(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 10 more
It appears that the applet never gets loaded. I have no idea why?
What is the Sun JVM doing here?
Many thanks in advance for any help.

Oh, one more thing. Here's the outpt of the VM log when I run the test above:
Java(TM) Plug-in: Version 1.4.2_03
Using JRE version 1.4.2 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\Michael
Proxy Configuration: No proxy
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
java.lang.NullPointerException
     at sun.plugin.cache.Cache.updateTable(Unknown Source)
     at sun.plugin.cache.FileCache.getMatchingFile(Unknown Source)
     at sun.plugin.cache.CachedFileLoader$2.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.plugin.cache.CachedFileLoader.getCacheFile(Unknown Source)
     at sun.plugin.cache.CachedFileLoader.load(Unknown Source)
     at sun.plugin.cache.FileCache.get(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.connectWithCache(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.connect(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getInputStream(Unknown Source)
     at sun.plugin.net.protocol.http.HttpURLConnection.getHeaderField(Unknown Source)
     at java.net.HttpURLConnection.getResponseCode(Unknown Source)
     at sun.applet.AppletClassLoader.getBytes(Unknown Source)
     at sun.applet.AppletClassLoader.access$100(Unknown Source)
     at sun.applet.AppletClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     at sun.applet.AppletClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.applet.AppletClassLoader.loadCode(Unknown Source)
     at sun.applet.AppletPanel.createApplet(Unknown Source)
     at sun.plugin.AppletViewer.createApplet(Unknown Source)
     at sun.applet.AppletPanel.runLoader(Unknown Source)
     at sun.applet.AppletPanel.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
v

Help! (please :) I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Help! (please I have a 1GB iPod that's loaded with music for which my computer can no longer find the original files-due to external mass storage crash during recent move. Is there a way to import iPod music back into my iTunes library on computer???

Or If there is any purchased music then you can try to transfer purchases
http://support.apple.com/kb/ht1848
If you're in the US you can reload purchased music
http://support.apple.com/kb/ht2519

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

I have a problem with the sync between iTunes and ipad2. I can not see the files in iPad. Help me please.

Cannot see what files ? Music (synced music should appear in the iPod app), films/TV shows (Videos app), documents ... ?

Apple iPad 3. BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Can anyone help me please.

BT email not working. Cannot send emails from btconnect SMTP after iOS upgrade. This is the only difference I am aware of. Apple iPad 3. Can anyone help me please.

All resolved at last
Deleted the SMTP setting
Recreated the SMTP using the same settings
Able to send emails now
No logic - as usual - just a bug!

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no ma

HELP. ............Hi folks hope some one can help me please.Having a problem in Bridge I open my images in ACR, as I open files in a folder and lets say they are labeled in yellow they are all going back to the camera raw default , in other words no matter what work I have done, inc cropping they all go back to ,as they came out of camera. What on earth is happening? I am on PS CS6. I might point out everything was working normally up to yesterday, when this first started.
I recently changed computer to 64bit from 32bit, not sure if this causing the problem or not. Any help would be appreciated.

Robert,
Would you be so kind to rephrase your question with concise, precise information and without any "let's say that" hypotheticals? Sorry, I can't quite follow you.
Also please give exact versions of Photoshop CS6 (13.what.what), of Bridge and of your OS.
Thanks.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand, such as your platform (Mac or Win), exact versions of your OS, of Photoshop and of Bridge, machine specs, what troubleshooting steps you have taken so far, what error message(s) you receive, if having issues opening raw files also the exact camera make and model that generated them, etc., someone may be able to help you.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Help needed please.. how do I remove my credit card from itunes? just discovered over $450 of charges when I looked at my email... Kids had no clue they were using our money and not their gift cards

Help needed please.... I just discovered over $450 charges to my credit card from Itunes. The kids had no idea they were using our credit card and not their itunes gift cards and 4 year old just clicks on anything! I didnt save my credit card details so am a bit miffed at this... I cant find anywhere in itunes to remove it. Edit.. but not remove. Editing does not remove it.. HELP

To Contact iTunes Customer Service and request assistance
Use this Link > Apple Support iTunes Store Contact
Accepted forms of payment > http://support.apple.com/kb/HT5552
Changing Account Information > http://support.apple.com/kb/HT1918

Help needed please, with Iphone stuck with apple picture and progress bar after software update attempted

Help needed please, everytime I try to update the software version on my iphone it comes up with a message saying it could not be completed and is now frozen with the apple picture and progress bar on it. Do I unplug it and hope the macbook pro sees it again, I also stupidly did not back up before starting the download which I realise I will have to go back to the previous back up. This keeps happening, everytime I do this type of update, I'm starting to think I should just give up on updating my software on the Iphone. I thought it was happening because I was using a window based computer to do the updates, this time I used my Macbook Pro. Please somebody help

ljm17 wrote:
...This keeps happening, everytime I do this type of update, I...
Then you should know what you need to do... If you don't remember...
See Here > http://support.apple.com/kb/HT1808

Sun VM VS Microsoft VM... HELP ME PLEASE!

Similar Messages

Maybe you are looking for