Sun Workshop Analyzer Function/Modules corrupted

I am trying to run the Workshop analyzer on C++ code. However, the error message "Functions/Modules information corrupted" appears in the window of the analyzer and the time spent in each of the functions is listed as being 0.0000 seconds. I only get a general overview of the time spent waiting by the program.I compiled using the -g flag for debugging before analyzing. I'm sure the code is not this efficient. Does anyone know what the source of this problem could be?

Hi,
thanks for your answers.
I'll list what I did in case it helps someone else:
I tried the update first through "NetBeans update center".
I selected everything but that didn't solver the issue (I didn't see any explicit reference to dbx in the packages added).
Then I uninstalled sunstudio:
cd /opt
java -cp . uninstall_Sun_Studio_12Then I uninstalled netbeans:
cd /opt/netbeans-5.5.1/_uninst
./uninstallerAfter that, I noticed there was a second uninstall folder (my guess from sunstudio). So I uninstalled it too:
cd /opt/netbeans-5.5.1/_uninst2
./uninstallerAll 3 uninstall completed without errors.
There were some leftovers (mostly some netbeans modules and prerequisites) so I renamed the folders just in case:
mv netbeans-5.5.1 netbeans-5.5.1_old
mv prepare_system_prerequisites prepare_system_prerequisites_oldAt that point, I ran the installer again.
It tried to install but failed. Here's a small part of the log:
/tmp/installQIayVk/checkinstallSIayVk: /tmp/response.SPROfdxd: cannot create
Processing package instance <SPROfdxd> from </tmp/install-intel-S2/packages-intel-S2>
Sun Studio 12 X-Designer GUI Builder
(i386) 12.0,REV=2007.04.11
pkgadd: ERROR: request script did not complete successfully
Installation of <SPROfdxd> failed.
No changes were made to the system.
Error: pkgadd failed for SPROfdxd
...I was running this as root so I'm not sure why it failed.
I was reusing the installation files I extracted from the pkg.tar.bz2 under /tmp so I deleted everything and extracted it again from a different place.
I also deleted the .sunstudio, .netbeans and .java in my home folder.
I was previously using cygwin XWin to run the installer with the UI.
This time, I did it from a shell terminal (putty) and used the -nodisplay option.
It installed successfully.
Then I go back to the ui and sunstudio starts normally now: no missing modules and I have the dbx options in the menu
Again, thanks for your time.
Francois

Similar Messages

Function Modules for Data and Time

Hi all,
I need 2 function modules for date and time. when we pass current data(sy-datum) and current time (sy-uzeit) into function modules, shoud get date in dd/mm/yyyy or dd.mm.yyyy and time in HH:MM:SS formats.
Thanks in advance

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Data Services XI3.1 function module files for SAP R/3 is not working

Hi guys,
Thank you for the quick response so far. I am very grateful to you all.
I got an issue and will try to explain as detail as I could and
hope ur guys won't mind. :P
I pass the functions module to SAP tech guy to install to SAP using CTS
method, and using 900086.R63 file type because my chinese client is
running SAP on unicode environment.
My DS installed on my laptop client; job server plus db2 is on HP
unix. SAP is on another HP Unix server. The function module I used is
supplied from Data Services XI3.1.
Anyway, the installation is successfully done with GUI wizard windows of
SAP Workbench instead of tp command line method.
1)However, I checked the ZAW0 function group, I opened and can't see any functions
listed under it, although the table structures ZACTA, ZTAB2048 and other items
were created.
2)So I tried to create SAP Datastore, Transport Target, etc and tried to
extract file. It failed and log said "can't open file ---
/db2/temp/curcode.txt". I checked and SAP working directory /db2/temp didn't have
curcode.txt, because the result file supposed to be extracted and stored there.
The SAP tech guy checked SAP and cant find generated ABAP program of
ZCURCD is running anyway, although my local CURCD ABAP program is
created.
3)Is it the 900086.R63 not complete? Is my function installation correct? I could view data
on datastore, but just cant run job to extract. Another non-unidcode 900200.S08 group
has larger file sizes. Should I try to install also this 900200.S08 files? Will it corrupt SAP
and cause system errors?
4)After that, I had tried to install the functions manually into ZAW0
one by one using cut and paste, however after that, I cant view the data view anymore with
error. Besides, I tried to run Check on the functions and they all returned
syntax errors, so I cant Activate any of them with SAP. Maybe dependency is missing??
Then, I deleted the manually installed functions and can view data again, but just cant extract
data by job.
5)Another side issue is all these SAP datastore creation and viewing is
through DI 11.5 old installation. The new Data Services X3.1 unable to
create datastore with database error, although the function module
installed is came from Data Services. Does anyone know the issue?
Thank you very much to read it patiently. :P

Hi,
Thank you for the informative link. It did help a lot in solving the problem.
(1) to (4) --- The Sap tech guy didnt install the function programs correctly, and he redo the transport again using CTS. Now I can see all the functions inside the function group ZAW0. While for the problem of cannot generate extracted file to SAP working directory for downloading, it is due to unix directory access permission setting. And also have to include the ftp username into SAPSYS user group as the help link suggested.
(5) For this problem, I reinstalled again the DS with all required components like Server Manager. The network technical guy helped me with the first installation, and the installation was not complete. So now the issue is solved, I can create R/3 Datastore with DS.

Use HIDE in Function Module.

Hi expert,
When I using HIDE in my function module, i got an error message said that
"You cannot use HIDE with a local field". How can this happen and what can i do?
Pls advise. Thanks.

hI
UCCHECK
ABAP Unicode Scan Tool UCCHECK
You can use transaction UCCHECK to examine a Unicode program set for syntax errors without having to set the program attribute "Unicode checks active" for every individual program. From the list of Unicode syntax errors, you can go directly to the affected programs and remove the errors. It is also possible to automatically create transport requests and set the Unicode program attribute for a program set.
Some application-specific checks, which draw your attention to program points that are not Unicode-compatible, are also integrated.
Selection of Objects:
The program objects can be selected according to object name, object type, author (TADIR), package, and original system. For the Unicode syntax check, only object types for which an independent syntax check can be carried out are appropriate. The following object types are possibilities:
PROG Report
CLAS Class
FUGR Function groups
FUGX Function group (with customer include, customer area)
FUGS Function group (with customer include, SAP area)
LDBA Logical Database
CNTX Context
TYPE Type pool
INTF Interface
Only Examine Programs with Non-Activated Unicode Flag
By default, the system only displays program objects that have not yet set the Unicode attribute. If you want to use UCCHECK to process program objects that have already set the attribute, you can deactivate this option.
Only Objects with TADIR Entry
By default, the system only displays program objects with a TADIR entry. If you want to examine programs that don't have a TADIR entry, for example locally generated programs without a package, you can deactivate this option.
Exclude Packages $*
By default, the system does not display program objects that are in a local, non-transportable package. If you want to examine programs that are in such a package, you can deactivate this option.
Also Display Modified SAP Objects
By default, SAP programs are not checked in customer systems. If you also want to check SAP programs that were modified in a customer system (see transaction SE95), you can activate this option.
Maximum Number of Programs:
To avoid timeouts or unexpectedly long waiting times, the maximum number of program objects is preset to 50. If you want to examine more objects, you must increase the maximum number or run a SAMT scan (general program set processing). The latter also has the advantage that the data is stored persistently. Proceed as follows:
- Call transaction SAMT
- Create task with program RSUNISCAN_FINAL, subroutine SAMT_SEARCH
For further information refer to documentation for transaction SAMT.
Displaying Points that Cannot Be Analyzed Statically
If you choose this option, you get an overview of the program points, where a static check for Unicode syntax errors is not possible. This can be the case if, for example, parameters or field symbols are not typed or you are accessing a field or structure with variable length/offset. At these points the system only tests at runtime whether the code is sufficient for the stricter Unicode tests. If possible, you should assign types to the variables used, otherwise you must check runtime behavior after the Unicode attribute has been set.
To be able to differentiate between your own and foreign code (for example when using standard includes or generated includes), there is a selection option for the includes to be displayed. By default, the system excludes the standard includes of the view maintenance LSVIM* from the display, because they cause a large number of messages that are not relevant for the Unicode conversion. It is recommended that you also exclude the generated function group-specific includes of the view maintenance (usually L<function group name>F00 and L<function group name>I00) from the display.
Similarly to the process in the extended syntax check, you can hide the warning using the pseudo comment ("#EC *).
Applikation-Specific Checks
These checks indicate program points that represent a public interface but are not Unicode-compatible. Under Unicode, the corresponding interfaces change according to the referenced documentation and must be adapted appropriately.
View Maintenance
Parts of the view maintenance generated in older releases are not Unicode-compatible. The relevant parts can be regenerated with a service report.
UPLOAD/DOWNLOAD
The function modules UPLOAD, DOWNLOAD or WS_UPLOAD and WS_DOWNLOAD are obsolete and cannot run under Unicode. Refer to the documentation for these modules to find out which routines serve as replacements.
REWARD IF USEFULL

RFC CALL canu00B4t execute Functions module ??

Hello everybody,
I have a problem with a Function module. The function module should open an link (it´s a Link of a Webdynpro Application).
I have the following constellation.
Bex Analyzer execute a RFC Call to open/execute the Function module. The Function module should open a URL (Webdynpro Application), but it doesn´t work.
I don´t know why. The Connection of the RFC Call is ok. I have tested the RFC with any Object´s and it works (He "answered").
What ist wrong in the Function Module, why can´t the FM open the URL??!
Simple Code of Function Module
call method cl_gui_frontend_services=>execute
exporting
document = 'URL'
exceptions
others = 1.
Endfunction.
A other test
*CALL FUNCTION 'PRGN_GENER_EXECUTE_URL'
*EXPORTING
*NODE_DATA = 'url'.
The VBA Code for RFC
Sub Login()
Dim functionCtrl As Object
Dim sapConnection As Object
Dim theFunc As Object
Dim sReturn As Boolean
Dim l_export As String
Dim objQueryTab As Variant
Set functionCtrl = CreateObject("SAP.Functions")
Set sapConnection = functionCtrl.Connection
sapConnection.Client = "100"
sapConnection.user = "xy"
sapConnection.Language = ".."
sapConnection.SystemNumber = "xy"
sapConnection.ApplicationServer = "xy"
sapConnection.Language = "x"
sapConnection.codepage = "xy"
sapConnection.Destination = "xy"
sapConnection.System = "x"
sapConnection.SystemID = "......"
sapConnection.Password = "xy"
sapConnection.autologon = 1
If sapConnection.Logon(0, True) <> True Then
MsgBox "Keine Verbindung"
Else
Set theFunc = functionCtrl.Add("SS_RFC_URL_TEST")
objQueryTab = "200"
theFunc.Exports("I_PAR") = objQueryTab
sReturn = theFunc.call
If sReturn = True Then
objQueryTab = theFunc.Imports("E_PAR")
End If
sapConnection.logoff
End If
End Sub
>E_PAR is the Exportparameter of the Function module
>I_PAR is the Importparameter of the Function module
Thanks
Edited by: Schwarzenberger Stefan on May 9, 2011 1:59 PM

Hi, I have a similar situation. Within VBA I am calling the RFC 'RFC_CALCULATE_TAXES_DOC'. This RFC is used to communicate with external tax software like Taxware; it gets applicable tax rates, amounts, etc. based on tax jurisdiction code and other data. The RFC is remote-enabled (has to be to talk to Taxware).
This RFC requires an RFC Destination in order to work. Within VBA, I have not been able to figure out the syntax required to enter the Destination name. I saw Shreeram's post saying to use CALL FUNCTION 'PRGN_GENER_EXECUTE_URL' DESTINATION <RFC Destination Name>. However, this looks like ABAP syntax and not VBA syntax.
Does anybody know if this is possible within VBA? Sounds like it's not but wanted to double-check.
Thanks!!
Kory Squire
<<Removed email address>>
Edited by: Matt on May 18, 2011 6:37 AM

RFC Lookup error :No RFC authorization for function module

Hi All,
I have created RFC in the PI system and enabled it as remote. I am working on PI7.1
I have imported RFC into Repository.But when i am trying to execute RFC lookup function in the graphical mapping I am getting No RFC authorization for function module error.
Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> com.sap.aii.mapping.api.StreamTransformationException: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception> at com.sap.aii.mappingtool.flib7.RfcLookup.cacheMore(RfcLookup.java:95) at com.sap.aii.mappingtool.tf7.rt.AMultiResIterator$MultiOutIterator.gotoNextContext(AMultiResIterator.java:95) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:315) at com.sap.aii.mappingtool.tf7.AMappingProgram.processNode(AMappingProgram.java:406) at com.sap.aii.mappingtool.tf7.AMappingProgram.start(AMappingProgram.java:496) at com.sap.aii.mappingtool.tf7.Transformer.start(Transformer.java:133) at com.sap.aii.mappingtool.tf7.AMappingProgram.transform(AMappingProgram.java:626) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.transformInternal(ExecuteXiMappingCommand.java:197) at com.sap.aii.ibrep.server.mapping.exec.ExecuteXiMappingCommand.execute(ExecuteXiMappingCommand.java:94) at com.sap.aii.ib.server.mapping.exec.CommandManager.execute(CommandManager.java:43) at com.sap.aii.ibrep.server.mapping.ServerMapService.execute(ServerMapService.java:40) at com.sap.aii.ibrep.server.mapping.MapServiceBean.execute(MapServiceBean.java:40) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.ejb3.runtime.impl.RequestInvocationContext.proceedFinal(RequestInvocationContext.java:43) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:166) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatesTransition.invoke(Interceptors_StatesTransition.java:19) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Resource.invoke(Interceptors_Resource.java:71) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.doWorkWithAttribute(Interceptors_Transaction.java:38) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_Transaction.invoke(Interceptors_Transaction.java:22) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:189) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_StatelessInstanceGetter.invoke(Interceptors_StatelessInstanceGetter.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_SecurityCheck.invoke(Interceptors_SecurityCheck.java:21) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.Interceptors_ExceptionTracer.invoke(Interceptors_ExceptionTracer.java:16) at com.sap.engine.services.ejb3.runtime.impl.AbstractInvocationContext.proceed(AbstractInvocationContext.java:177) at com.sap.engine.services.ejb3.runtime.impl.DefaultInvocationChainsManager.startChain(DefaultInvocationChainsManager.java:133) at com.sap.engine.services.ejb3.runtime.impl.DefaultEJBProxyInvocationHandler.invoke(DefaultEJBProxyInvocationHandler.java:164) at $Proxy1005_10002.execute(Unknown Source) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) at java.lang.reflect.Method.invoke(Method.java:585) at com.sap.engine.services.rmi_p4.P4DynamicSkeleton.dispatch(P4DynamicSkeleton.java:234) at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:351) at com.sap.engine.services.rmi_p4.server.ServerDispatchImpl.run(ServerDispatchImpl.java:70) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:62) at com.sap.engine.services.rmi_p4.P4Message.execute(P4Message.java:37) at com.sap.engine.services.cross.fca.FCAConnectorImpl.executeRequest(FCAConnectorImpl.java:872) at com.sap.engine.services.rmi_p4.P4Message.process(P4Message.java:53) at com.sap.engine.services.cross.fca.MessageReader.run(MessageReader.java:58) at com.sap.engine.core.thread.execution.Executable.run(Executable.java:108) at com.sap.engine.core.thread.execution.CentralExecutor$SingleThread.run(CentralExecutor.java:304) Runtime exception when processing target-field mapping /ns0:MT_FileDummy/File; root message: Unhandled RFC exception: <rfc:Z_MAIL_LOOKUP.Exception xmlns:rfc="urn:sap-com:document:sap:rfc:functions"><Name>RFC_ERROR_SYSTEM_FAILURE</Name><Text>No RFC authorization for function module Z_MAIL_LOOKUP.</Text><Message><ID>RFC_ERROR_SYSTEM_FAILURE</ID><Number>341</Number></Message><Attributes><V1>RFC_NO_AUTHORITY</V1></Attributes></rfc:Z_MAIL_LOOKUP.Exception>
13:42:37 End of test
Edited by: Rams on Apr 17, 2009 1:43 PM

Hi! Rams,
I think the issue is related to Authentification Issue..Even though u did correctly please check once the below
1) Check any Typo Erros are there while configuring or giving names in Lookups.
2) please check Authorizations like ID and PWD and Sufficient Roles
3) Also please check did u given paramters correctly while doing RFC look up I mean paramers , Binding parameters and RFC channel name and adapter type or Simple type it must be an adapter
4) In ID part while configuring Interface determinaition you need to give your RFC look Up name there also..Hence check whether u given or not if yes correctly or not
5) Also remember one thing if your scenario is correct mostly you can know the result in mapping itself it seems while testing Message mapping and Interface mappings give your RFC look up paramters in the parameters tab present in TEST tab and later in Document tab give Input...and execute it works if it doesn;t works and if there is an issue with RFC you can get there only..ok
Also go through the below document::
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/20befc9a-aa72-2b10-ae9b-b0988791d457]
I hope this will give u brief idea...
Also check with basis while taking SAP_ALL authorization so that first u ill came to know whether issue is related to authentification or RFC module itself remote enabled and also do SXI_CACHE also ocne to refresh ESR and ID objects..
Regards::
Amar Srinivas Eli

Function modules for F881 and F889

Hi,
is there some function module ( or ? ) to create records by F881 and F889, i don't want to use batch input method...
thanks for your help.
Pedro

Hi Ranjith,
i think this will b usefull for you..
SAP Bar Chart Function Modules and what they are used for
Function module
Used for
BARC_GRAPHIC_PBO
Starting bar chart at PBO time, using a graphic profile (parameter PROFILE)
BARC_GRAPHIC_PAI
Analyzing data returned by the graphic
BARC_SET_TIME_AXIS
Setting start and end of time axis
BARC_SET_OPTIONS
Setting options
BARC_ADD_CHART
Creating a chart
BARC_SET_CHART_ATTRIB
Setting chart attributes
BARC_ADD_SECTION
Creating a section on the time axis
BARC_SET_SECTION_ATTRIB
Setting section attributes
BARC_ADD_RIBBON
Adding a ribbon to the time axis
BARC_SET_RIBBON_ATTRIB
Setting attributes for ribbons in the chart
BARC_ADD_GRID
Adding a time grid
BARC_SET_GRID_ATTRIB
Setting grid attributes
BARC_ADD_LAYER
Adding a layer (graphic elements)
BARC_SET_LAYER_ATTRIB
Setting layer attributes
BARC_ADD_LINE
Adding a line
BARC_ADD_CALENDAR
Creating a calendar
BARC_SET_CALENDAR_ATTRIB
Setting attributes for a calendar
BARC_ADD_TIME_PROFILE
Creating time profiles
BARC_SET_TIME_PROFILE_ATTRIB
Setting attributes for time profile
BARC_ADD_INTERVAL
Adding a time interval
BARC_SET_INTERVAL_ATTRIB
Setting time interval attributes
BARC_ADD_TIME_OBJECT
Creating a time object
BARC_CONVERT_DATE
Creating a date string in bar chart format
BARC_REVERT_DATE
Converting a date string in bar chart format to date and time
BARC_ADD_DATELINE
Creating a date line
BARC_SET_DATELINE_ATTRIB
Setting dateline attributes
BARC_GET_PROFILE_CONTENTS
Obtaining profile contents for customizing a chart
BARC_GET_COLUMN_WIDTH
Selecting new column width
BARC_SET_COLUMN_WIDTH
Setting the column width
BARC_GET_TEXTINDEX
Obtaining the text index of a field
BARC_SET_LABELS
Positioning the chart display
BARC_SET_COLUMN_ATTRIB
Setting column attributes
BARC_SET_ROW_ATTRIB
Setting row attributes
BARC_SET_ROW_HEIGHT
Setting the line height
BARC_SET_MAXCHARTS
Setting the maximum number of charts sent
If its usefull reward points

Calling Function Module in Update Task

Hello Experts,
Can anyone let me know about
Calling Function Module in Update Task.
Why do we use this " In Update Task " ??
How do we Use ??
What is the Use... ??
Kindly let me know....
Thanks and Regards
Pramod

hi,
Why do we use this " In Update Task " ??
The main update technique for bundling database changes in a single database LUW is to use CALL FUNCTION... IN UPDATE TASK.
How do we Use ??
A typical R/3 installation contains dialog work processes and at least one update work process. The update work processes are responsible for updating the database. When an ABAP program reaches a COMMIT WORK statement, any function modules from CALL FUNCTION... IN UPDATE TASK statements are released for processing in an update work process. The dialog process does not wait for the update to finish. This kind of update is called asynchronous update.
What is the Use... ??
Asynchronous update is useful when response time from the transaction is critical, and the database updates themselves are so complex that they justify the extra system load
Real time scenario.
Suppose a user wants to change an entry in a database table, or add a new one. He or she enters the necessary data, and then starts the update process by choosing Save. This starts the following procedure in the ABAP program:
Firstly, the program locks the database entry against other users, using the enqueue work process (or the message server in the case of a distributed system). This generates an entry in the lock table. The user is informed whether the update was successful, or whether the lock could not be set because of other users.
If the lock is set, the program reads the entry that is to be changed and modifies it. If the user has created a new entry, the program checks whether a record with the same key values already exists.
In the current dialog work process, the program calls a function module using CALL FUNCTION... IN UPDATE TASK, and this writes the change details as an entry in table VBLOG.
When the program is finished (maybe after further dialog steps), a COMMIT WORK statement starts the final part of the SAP LUW. The work process that is processing the current dialog step starts an update work process.
Based on the information passed to it from the dialog work process, the update work process reads the log entries belonging to the SAP LUW from table VBLOG.
The update work process passes this data to the database for updating, and analyzes the return message from the database. If the update was successful, the update work process triggers a database commit after the last database change and deletes the log entries from table VBLOG.
If an error occurred, the update work process triggers a database rollback, leaves the log entries in table VBLOG, flags them as containing errors, and sends a SAPoffice message to the user, who should then inform the system administrator.
The corresponding entries in the lock table are reset by the update work process.
Hope this is helpful, Do reward.

Questions regarding update function module

Hello experts,
I am on customer site to help them investigate one issue: they have a background job which runs periodically.
In the report database table A is changed firstly ( new entries are inserted ), then a update function module is called via keyword CALL FUNCTION ... IN UPDATE TASK.
Inside the function module database table B is updated. ( existing entries are updated )
Customer issue:
sometimes they find A is updated as expected, however B remains unchanged at the same time.
customer could not find exact steps to reproduce the issue. However the issue does exist there and occur from time to time.
the issue could only be reproduced in their production system, but works perfectly well in dev & Q system. It is difficult to debug in their production system for trouble shooting.
After analyzing related code, I have one doubt: according to ABAP help on CALL FUNCTION aaa IN UPDATE TASK, I know the function module aaa is called in a new update work process. I wonder whether there is any possibility there this issue might be caused because the update function module fails to get called at all? ( perhaps due to heavy system load so no free update function module could serve the table B update ? )
If update function module fails to execute, is there any system utility to record this? That is to say, will it be recorded in such as SM13 or SM21?
Looking forward to your expertise on this topic!
Best regards,
Jerry

Hello friends,
Thanks a lot for your interests on this issue. I update all my findings:
1. issue background: this issue occurs in SAP CRM Channel manageement Solution, software component CRM-CHM-POS.
2. due to some limitations, the table CMSD_CI_HISTORY and history table are not updated in the same LUW. Instead the first one is updated in normal work process while the other is done in update work process. Since I am not the original developer I didn't know the whole complex scenario ( I did see this is done delibrately in note 1764006 - CMS:Sell In Release creating PB with zero available quantity ).
So for the moment we have to accept this design.
3. during our testing ,we ensure COMMIT WORK is always called.
4. So why sometimes the first table update fails, however there is no hint at all for this failure in the system like ST22 and SM21 ?? ( forget SM13, since it is updated in normal work process ).
The root cause is the flaw of SAP code below.
The code has planned to raise exception if insertion failed due to duplicate records to be inserted.
Unfortunately, the fact is if we use "INSERT db FROM TABLE xxx" to insert records into database and some record already exists with the same key, it will result in a termination but SY-SUBRC is STILL 0; Just compare it with single insertion using "INSERT db FROM <work area>", in the same error situation, processing does not terminate, and SY-SUBRC is set to 4.
As a result in this case even the insertion fails, line 29 will never be executed as sy-subrc is always 0. Since the insertion fails and the exception is caught without any notification, so customer sufferred because they do not know what has happened.
Best regards,
Jerry

How to call function module from IP

Hi
I need to trigger the process chain from the input ready queries in Bex analyzer. I figured out that I need to call RSPC_API_CHAIN_START.
How do we go about in calling the above function module in IP.
Thanks in advance
I

Hi Matt
Thanks for your response, it was very productive at the right time as we saw our process chain running indefinetly. With selecting all chars to be changed, it ran just once with no errors.
what is TA ? I know rsplan- transaction code for the planning modeler.
Can you tell me how can we call function module in custom exit planning function.
Where should I embed the code
CALL FUNCTION 'RSPC_API_CHAIN_START'
               EXPORTING
                 I_CHAIN             = 'ZPC_CCATOPCA'.
               I_T_VARIABLES       =
               I_SYNCHRONOUS       =
               I_SIMULATE          =
               I_NOPLAN            =
             IMPORTING
               E_LOGID             =
             EXCEPTIONS
               FAILED              = 1
               OTHERS              = 2
thanks in advance

Multiple call of update function module

Hi Everybody,
I have made implementation to the definition MB_DOCUMENT_BADI( material Document creation).
While executing this BADI I am getting short dum with this error Multiple call of update function module.
Here is the short dump--
In the FORM routine Buchen_Ausfuehren (program SAPMM07M), an error
message was issued by a Business Add-In (BAdI) or function module.
This is not permitted, because it could lead to data
inconsistencies. For this reason, the update of the material
document was also terminated with a termination message (dump).
Note that this message (M7 372) is not the responsible error
message.
Please any body suggest the way forward.
Regards,
Sandeep.

Hi Kiran,
Thanks for the reply.
I have created one implementation to the BADI MB_DOCUMENT_BADI. This badi will hit while creation of material document.I have write the code in method MB_DOCUMENT_BEFORE_UPDATE such that it will act only for certain movement types specially for t-codeMb1a and MB31.
What problem I am facing i have used a error message "MB_DOCUMENT_BEFORE_UPDATE" in this method.If we got the erroe message then we dont need to post the material dcoument,but here problem is that if the material document could not posted then it corrupt the material and when we performing 261/101 we got error message like " Inconsistency between MM and ML for material and plant"
I have used following things like-
1-while updating the customized table using " Commit Work".
2-Call function vb_change_batch for updating the batch and not in update task.
3. Dequeue the table after updating the table.
Will thos things can create any inconsistency to the MM and ML.
Please suggest me uor thoughts.
Thanks
sandeep.
Thanks ,
sandeep.

Use of input parameter of function module

Hi,
we implemented an enhancement of a function module with a new inputparameter.
Now we would like to do some follow-up to see if our developers are starting to use this new parameter.
Is there a way to find this out? We can do a program scan on the name of this new parameter, but this does not seem to be enough.
Thanks for the advice.
Kris

Hi Kris,
as described, you can do a where-used-list and expand the nodes.
This will not cover any dynamic calls.
If you want to know the real use of the new parameter, then you can implement a LOG-POINT in the function module, like
FUNCTION xyz.
IF NEW_PARAMETER IS SUPPLIED.
LOG-POINT ID YOUR_LOG_POINT FIELDS sy-uname sy-uzeit sy-cprog NEW_PARAMETER.
ENDIF.
You can create, activate and evaluate LOG-POINTS with transaction SAAB. It is extremely helpful for a lot of analyzing purposes as you can switch logging on and off for users and servers on the fly. If you know what you want to know you can leave the log-points in the program code and just deactivate logging.
Regards,
Clemens

Function module for calculating sigma balance

Is there any function module available in SAP for calculating sigma balance.
Thanks
Gaurav

hi
ABAP_DOCU_DOWNLOAD     Download ABAP documentation in HTML format.
APPL_LOG_DELETE     With this function module you delete logs in the database according to specified selection conditions
APPL_LOG_DISPLAY     With this function module you can analyze logs in the database.
APPL_LOG_DISPLAY_INTERN     With this function module you can analyze logs in local memory, e.g. when you have only collected log records at runtime and do not want to write to the database.
APPL_LOG_INIT     This function module checks whether the specified object or sub-object exists and deletes all existing associated data in local memory.
APPL_LOG_READ_DB     With this function module you read the log data in the database for an object or sub-object according to specified selection conditions.
APPL_LOG_READ_INTERN     With this function module you read all log data whose log class has at least the specified value, from local memory, for the specified object or sub-object.
APPL_LOG_SET_OBJECT     With this function module, you create a new object or sub-object for writing in local memory. With a flag you can control whether the APPL_LOG_WRITE_... messages are written in local memory or are output on the screen.
APPL_LOG_WRITE_DB     With this function module you write all data for the specified object or sub-object in local memory to the database. If the log for the object or sub-object in question is new, the log number is returned to the calling program.
APPL_LOG_WRITE_HEADER     With this function module, you write the log header data in local memory.
APPL_LOG_WRITE_LOG_PARAMETERS     With this function module, you write the name of the log parameters and the associated values for the specified object or sub-object in local memory. If this function module is called repeatedly for the same object or sub-object, the existing parameters are updated accordingly. If you do not specify an object or sub-object with the call, the most recently used is assumed.
APPL_LOG_WRITE_MESSAGE_PARAMS     With this function module you write a single message, with parameters, in local memory. Otherwise the function module works like APPL_LOG_WRITE_SINGLE_MESSAGE.
APPL_LOG_WRITE_MESSAGES     With this function module you write one or more messages, without parameters, in local memory.
APPL_LOG_WRITE_SINGLE_MESSAGE     With this function module you write a single message, without parameters, in local memory. If no header entry has yet been written for the object or sub-object, it is created. If you do not specify an object or sub-object with the call, the most recently used is assumed.
ARFC_GET_TID     will return the IP address of the terminal in hex.
BAL_CNTL_CREATE     Create Control for log display
BAL_CNTL_FREE     Release Control
BAL_CNTL_REFRESH     Put new data in log display
BAL_DB_DELETE     Delete logs from the database
BAL_DB_DEQUEUE     Unlock log
BAL_DB_ENQUEUE     Lock log
BAL_DB_LOAD     Load logs from the database
BAL_DB_LOAD     Load log(s)
BAL_DB_SAVE     Save logs in the database
BAL_DB_SAVE     Save log(s)
BAL_DB_SAVE_PREPARE     Prepare save
BAL_DB_SEARCH     Find logs in the database
BAL_DSP_LOG_DISPLAY     Display messages in memory
BAL_DSP_LOG_DISPLAY     Display Log
BAL_DSP_LOG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_LOG-PARAMS)
BAL_DSP_LOG_TECHNICAL_DATA     Output all log header data
BAL_DSP_MSG_LONGTEXT     Display message long text
BAL_DSP_MSG_PARAMETERS     Either output extended long text or call a callback routine (based on the data in BAL_S_MSG-PARAMS)
BAL_DSP_MSG_TECHNICAL_DATA     Output technical data of a message such as work area, error number, etc.
BAL_DSP_OUTPUT_FREE     End output
BAL_DSP_OUTPUT_INIT     Initialize output
BAL_DSP_OUTPUT_SET_DATA     Set dataset to be displayed
BAL_DSP_PROFILE_DETLEVEL_GET     Message hierarchy in DETLEVEL
BAL_DSP_PROFILE_NO_TREE_GET     Display without tree (fullscreen)
BAL_DSP_PROFILE_POPUP_GET     Display without tree (popup)
BAL_DSP_PROFILE_SINGLE_LOG_GET     Standard profile (SLG1) for one log
BAL_DSP_PROFILE_STANDARD_GET     Standard profile (SLG1) for a lot of logs
BAL_GLB_AUTHORIZATION_GET     Assign authorization
BAL_GLB_AUTHORIZATION_RESET     Reset authorization
BAL_GLB_CONFIG_GET     Read configuration
BAL_GLB_CONFIG_SET     Set configuration
BAL_GLB_MEMORY_EXPORT     Put function group memory in ABAP-MEMORY
BAL_GLB_MEMORY_IMPORT     Get function group memory from ABAP-MEMORY
BAL_GLB_MEMORY_REFRESH     (Partially) reset global memory
BAL_GLB_MEMORY_REFRESH     (Partially) initialize memory
BAL_GLB_MSG_CURRENT_HANDLE_GET     Get current message handle
BAL_GLB_MSG_DEFAULTS_GET     Get message defaults
BAL_GLB_SEARCH_LOG     Find logs in memory
BAL_GLB_SEARCH_MSG     Find messages in memory
BAL_LOG_CREATE     Create log with header data
BAL_LOG_CREATE     Create log with header data
BAL_LOG_DELETE     Delete log (from database also at Save)
BAL_LOG_EXIST     Check existence of a log in memory
BAL_LOG_HDR_CHANGE     Change log header
BAL_LOG_HDR_CHECK     Check log header data for consistency
BAL_LOG_HDR_READ     Read log header and other data
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_ADD     Put message in log
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHANGE     Change message
BAL_LOG_MSG_CHECK     Check message data for consistency
BAL_LOG_MSG_CUMULATE     Add message cumulated
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_DELETE     Delete message
BAL_LOG_MSG_EXIST     Check existence of a message in memory
BAL_LOG_MSG_READ     Read message and other data
BAL_LOG_MSG_REPLACE     Replace last message
BAL_LOG_REFRESH     Delete log from memory
BAL_LOG_REFRESH     Delete log from memory
BAL_MSG_DISPLAY_ABAP     Output message as ABAP-MESSAGE
BAL_OBJECT_SELECT     Read Application Log objects table record
BAL_OBJECT_SUBOBJECT     Check whether object and subobject exist and the combination is allowed
BAL_SUBOBJECT_SELECT     Read subobject table record
BP_EVENT_RAISE     Trigger an event from ABAP/4 program
BP_JOBLOG_READ     Fetch job log executions
CHANGEDOCUMENT_READ_HEADERS     Get the change document header for a sales document, and put the results in an internal table.
Example:
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                objectclass = 'EINKBELEG'
                objectid    = l_objectid
                username    = space
           TABLES
                i_cdhdr     = lt_cdhdr.
      LOOP AT lt_cdhdr WHERE udate IN s_aedat.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber = lt_cdhdr-changenr
             TABLES
                  editpos      = lt_editpos.
        LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                           AND   f_new = 'L'.
          p_desc = text-r01. " Cancel Contract
        ENDLOOP.
      ENDLOOP.
CHANGEDOCUMENT_READ_POSITIONS     Get the details of a change document, and store them in an internal table. This will tell you whether a field was changed, deleted, or updated.
Example:
      CALL FUNCTION 'CHANGEDOCUMENT_READ_HEADERS'
           EXPORTING
                objectclass = 'EINKBELEG'
                objectid    = l_objectid
                username    = space
           TABLES
                i_cdhdr     = lt_cdhdr.
      LOOP AT lt_cdhdr WHERE udate IN s_aedat.
        CALL FUNCTION 'CHANGEDOCUMENT_READ_POSITIONS'
             EXPORTING
                  changenumber = lt_cdhdr-changenr
             TABLES
                  editpos      = lt_editpos.
        LOOP AT lt_editpos WHERE fname = 'LOEKZ'
                           AND   f_new = 'L'.
          p_desc = text-r01. " Cancel Contract
        ENDLOOP.
      ENDLOOP.
CLAF_CLASSIFICATION_OF_OBJECTS     Return all of the characteristics for a material
CLOI_PUT_SIGN_IN_FRONT     Move the negative sign from the left hand side of a number, to the right hand side of the number. Note that The result will be left justified (like all character fields), not right justifed as numbers normally are.
CLPB_EXPORT     Export a text table to the clipboard (on presentation server)
CLPB_IMPORT     Import a Text Table from the Clipboard (on presentation server)
COMMIT_TEXT     To load long text into SAP
CONVERSION_EXIT_ALPHA_INPUT     converts any number into a string fill with zeroes, with the number at the extreme right
Example:
input = 123
output = 0000000000000...000000000000123
CONVERSION_EXIT_ALPHA_OUTPUT     converts any number with zeroes right into a simple integer
Example:
input   = 00000000000123
output = 123
CONVERT_ABAPSPOOLJOB_2_PDF     convert abap spool output to PDF
CONVERT_OTF     Convert SAP documents (SAPScript) to other types.
Example:
CALL FUNCTION "CONVERT_OTF"
       EXPORTING    FORMAT                = "PDF"
       IMPORTING    BIN_FILESIZE          = FILE_LEN
       TABLES       OTF                   = OTFDATA
                    LINES                 = PDFDATA
       EXCEPTIONS   ERR_MAX_LINEWIDTH     = 1
                    ERR_FORMAT            = 2
                    ERR_CONV_NOT_POSSIBLE = 3
                    OTHERS                = 4.
CONVERT_OTFSPOOLJOB_2_PDF     converts a OTF spool to PDF (i.e. Sapscript document)
CONVERT_TO_FOREIGN_CURRENCY     Convert local currency to foreign currency.
CONVERT_TO_LOCAL_CURRENCY     Convert from foreign currency to local currency
DATE_CHECK_PLAUSIBILITY     Check to see if a date is in a valid format for SAP. Works well when validating dates being passed in from other systems.
DATE_COMPUTE_DAY     Returns a number indicating what day of the week the date falls on. Monday is returned as a 1, Tuesday as 2, etc.
DATE_GET_WEEK     will return the week that a date is in.
DATE_IN_FUTURE     Calculate a date N days in the future.
DAY_ATTRIBUTES_GET
Return useful information about a day. Will tell you the day of the week as a word (Tuesday), the day of the week (2 would be Tuedsay), whether the day is a holiday, and more.(provided by Francois Henrotte)
DOWNLOAD     download a file to the presentation server (PC)
DYNP_VALUES_READ     Read the values from a dynpro. This function can be used to read the values from a report's selection screen too (Another example).
DYNP_VALUES_UPDATE     Similar to DYNP_VALUES_READ, this function will allow the updating of fields on a dynpro. Very useful when you want to change a field based on the value entered for another field.
ENQUE_SLEEP     Wait a specified period of time before continuing processing.
ENQUEUE_ESFUNCTION     Lock an abap program so that it cannot be executed.
Example:
Set the parameters as follows:
RELID = 'ZZ'
SRTF2 = 0
SRTF = (your report name)
Please note that you should not use SY-REPID to pass your report name to the function. The value of SY-REPID will change as it is being passed to the function module, and will no longer hold the value of the calling report.
EPS_GET_DIRECTORY_LISTING     return a list of filenames from a local or network drive
EPS_GET_FILE_ATTRIBUTES     Pass in a filename and a path, and will return attributes for the file
F4_DATE     displays a calendar in a popup window and allows user to choose a date, or it can be displayed read only.
F4_IF_FIELD_VALUE_REQUEST     Use values from a DDIC table to provide a list of possible values. TABNAME and FIELDNAME are required fields, and when MULTIPLE_CHOICE is selected, more than one value can be returned.
F4IF_INT_TABLE_VALUE_REQUEST     F4 help that returns the values selected in an internal table. Very handy when programming your very own F4 help for a field.
Example:
data:
    begin of t_values occurs 2,
      value like kna1-begru,
    end of t_values,
    t_return like ddshretval occurs 0 with header line.
t_values = 'PAR*'.
append t_values.
t_values = 'UGG'.
append t_values.
call function 'F4IF_INT_TABLE_VALUE_REQUEST'
       exporting
            retfield        = 'BEGRU'
            value_org       = 'S'
       tables
            value_tab       = t_values
            return_tab      = t_return
       exceptions
            parameter_error = 1
            no_values_found = 2
            others          = 3.
if sy-subrc = 0.
    read table t_return index 1.
    o_begru-low = t_return-fieldval.
    if o_begru-low = 'PAR*'.
      o_begru-option = 'CP'.
    else.
      o_begru-option = 'EQ'.
    endif.
    o_begru-sign = 'I'.
    append o_begru to s_begru.
else.
    o_begru = i_begru.
endif.
F4IF_SHLP_EXIT_EXAMPLE     documents the different reasons to use a search help exit, and shows how it is done.
F4IP_INT_TABLE_VALUE_REQUEST     This function does not exist in 4.6 and above. Use F4IF_INT_TABLE_VALUE_REQUEST instead.
FILENAME_GET     popup to get a filename from a user, returns blank filename if user selects cancel
FORMAT_MESSAGE     Takes a message id and number, and puts it into a variable. Works better than WRITE_MESSAGE, since some messages use $ as a place holder, and WRITE_MESSAGE does not accommadate that, it only replaces the ampersands (&) in the message.
FTP_COMMAND     Execute a command on the FTP server
FTP_CONNECT     Open a connection (and log in) to an FTP server
FTP_DISCONNECT     Close the connection (and log off) the FTP server
FU CSAP_MAT_BOM_READ     You can use this function module to display simple material BOMs. You cannot display BOM groups (for example, all variants of a variant BOM). as in transaction CS03. Current restrictions: You cannot display long texts. You cannot display sub-items. You cannot display classification data of BOM items for batches. You can only display one alternative or variant. You cannot enter an alternative for module CSAP_MAT_BOM_READ, so you always see alternative 01. The following example came from a posting on the SAP-R3-L mailing list.
Example:
data: begin of tstk2 occurs 0.
          include structure stko_api02.
data: end of tstk2.
data: begin of tstp2 occurs 0.
          include structure stpo_api02.
data: end of tstp2.
data: begin of tdep_data occurs 0.
         include structure csdep_data.
data: end of tdep_data.
data: begin of tdep_descr occurs 0.
         include structure csdep_descr.
data: end of tdep_descr.
data: begin of tdep_source occurs 0.
         include structure csdep_source.
data: end of tdep_source.
data: begin of tdep_order occurs 0.
         include structure csdep_order.
data: end of tdep_order.
data: begin of tdep_doc occurs 0.
         include structure csdep_doc.
data: end of tdep_doc.
data: flg_warning like capiflag-flwarning.
   call function 'CSAP_MAT_BOM_READ'
        exporting
             material   = 'MAT100'
             plant      = '0001'
             bom_usage = '1'
             valid_from = '20.12.1996'
           valid_to
        importing
             fl_warning = flg_warning
        tables
             t_stko       = tstk2
             t_stpo       = tstp2
             t_dep_data   = tdep_data
             t_dep_descr = tdep_descr
             t_dep_source = tdep_source
             t_dep_order = tdep_order
             t_dep_doc    = tdep_doc
        exceptions
             error      = 1.
Function Group GRAP is now obsolete.     SAP recommends using functions in function group SFES instead. Below is an overview of the changes.
G_SET_GET_ALL_VALUES     Fetch values from a set.
GET_CURRENT_YEAR     Get the current fiscal year.
Example:
CALL FUNCTION 'GET_CURRENT_YEAR'
EXPORTING
    BUKRS         = '1000'     " Company Code
    DATE          = SY-DATUM   " Date to find fiscal year for
IMPORTING
    CURRM         = w_currm    " Current Fiscal Month
    CURRY         = w_curry    " Current Fiscal Year
    PREVM         = w_prevm    " Previous Fiscal Month
    PREVY         = w_prevy.   " Previous Fiscal Year
GET_GLOBAL_SYMBOLS     Returns a list of all tables, select options, texts, etc for a program. Even includes the text definitions for the selection screen
GET_INCLUDETAB     Returns a list of all INCLUDES in a program
GET_JOB_RUNTIME_INFO
Get the current job number from a program. Also returns other useful info about the current job.
GUI_CREATE_DIRECTORY     Create a directory on the presentation server
GUI_DELETE_FILE     Replaces WS_FILE_DELETE. Delete a file on the presentation server
GUI_DOWNLOAD     Replaces WS_DOWNLOAD. Download table from the app server to presentation server
GUI_EXEC     Replaces WS_EXECUTE. Start a File or Program Asynchronously with WinExec
GUI_GET_DESKTOP_INFO     Replaces WS_QUERY. Delivers Information About the Desktop (client)
GUI_REMOVE_DIRECTORY     Delete a directory on the presentation server
GUI_RUN     Start a File or Program Asynchronously with ShellExecute
GUI_UPLOAD     Replaces WS_UPLOAD. Upoad file from presentation server to the app server
HELP_START     Display help for a field. Useful for doing AT SELECTION SCREEN ON VALUE REQUEST for those fields that do not provide F4 help at the DDIC level.
HELP_VALUES_GET_WITH_TABLE     Show a list of possible values for F4 popup help on selection screens. This function module pops up a screen that is just like all the other F4 helps, so it looks like the rest of the SAP system. Very useful for providing dropdowns on fields that do not have them predefined.
Example:
tables: t001w.
DATA: lc_werks      LIKE t001w-werks,
      ltab_fields LIKE help_value OCCURS 0 with header line,
      BEGIN OF ltab_values OCCURS 0,
        feld(40) TYPE c,
      END OF ltab_values.
*-- Set up fields to retrieve data
ltab_fields-tabname    = 'T001W'.
ltab_fields-fieldname = 'WERKS'.
ltab_fields-selectflag = 'X'.
APPEND ltab_fields.
ltab_fields-tabname    = 'T001W'.
ltab_fields-fieldname = 'NAME1'.
ltab_fields-selectflag = space.
APPEND ltab_fields.
*-- Fill values
select * from t001w.
    ltab_values-feld = t001w-werks.
    append ltab_values.
    ltab_values-feld = t001w-name1.
    append ltab_values.
endselect.
CALL FUNCTION 'HELP_VALUES_GET_WITH_TABLE'
     EXPORTING
          fieldname                 = 'WERKS'
          tabname                   = 'T001W'
          title_in_values_list      = 'Select a value'
     IMPORTING
          select_value              = lc_werks
     TABLES
          fields                    = ltab_fields
          valuetab                  = ltab_values
     EXCEPTIONS
          field_not_in_ddic         = 01
          more_then_one_selectfield = 02
          no_selectfield            = 03.
HOLIDAY_CHECK_AND_GET_INFO     Useful for determining whether or not a date is a holiday. Give the function a date, and a holiday calendar, and you can determine if the date is a holiday by checking the parameter HOLIDAY_FOUND.
Example:
data: ld_date                 like scal-datum default sy-datum,
      lc_holiday_cal_id       like scal-hcalid default 'CA',
      ltab_holiday_attributes like thol occurs 0 with header line,
      lc_holiday_found        like scal-indicator.
CALL FUNCTION 'HOLIDAY_CHECK_AND_GET_INFO'
EXPORTING
    date                               = ld_date
    holiday_calendar_id                = lc_holiday_cal_id
    WITH_HOLIDAY_ATTRIBUTES            = 'X'
IMPORTING
    HOLIDAY_FOUND                      = lc_holiday_found
tables
    holiday_attributes                 = ltab_holiday_attributes
EXCEPTIONS
    CALENDAR_BUFFER_NOT_LOADABLE       = 1
    DATE_AFTER_RANGE                   = 2
    DATE_BEFORE_RANGE                  = 3
    DATE_INVALID                       = 4
    HOLIDAY_CALENDAR_ID_MISSING        = 5
    HOLIDAY_CALENDAR_NOT_FOUND         = 6
    OTHERS                             = 7.
if sy-subrc = 0 and
   lc_holiday_found = 'X'.
write: / ld_date, 'is a holiday'.
else.
write: / ld_date, 'is not a holiday, or there was an error calling the function'.
endif.
HOLIDAY_GET     Provides a table of all the holidays based upon a Factory Calendar &/ Holiday Calendar.
HR_DISPLAY_BASIC_LIST     is an HR function, but can be used for any data. You pass it data, and column headers, and it provides a table control with the ability to manipulate the data, and send it to Word or Excel. Also see the additional documentation here.
HR_GET_LEAVE_DATA     Get all leave information (includes leave entitlement, used holidays/paid out holidays)
HR_IE_NUM_PRSI_WEEKS     Return the number of weeks between two dates.
HR_PAYROLL_PERIODS_GET
Get the payroll period for a particular date. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
        IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
       EXPORTING
            get_begda       = w_begda
       TABLES
            get_periods     = it_t549q
       EXCEPTIONS
            no_period_found = 1
            no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
       EXPORTING
            get_pernr             = w_pernr
            get_pabrj             = it_t549q-pabrj
            get_pabrp             = it_t549q-pabrp
       TABLES
            get_zl                = it_zl
       EXCEPTIONS
            no_period_specified   = 1
            wrong_cluster_version = 2
            no_read_authority     = 3
            cluster_archived      = 4
            technical_error       = 5.
NOTE: it_zl-iftyp = 'A'   absence
      it_zl-iftyp = 'S'   at work
HR_TIME_RESULTS_GET
Get the time results for a payroll period. (provided by Francois Henrotte)
Example:
DATA: IT_T549Q TYPE T549Q OCCURS 0 WITH HEADER LINE,
        IT_ZL TYPE PC2BF OCCURS 0 WITH HEADER LINE.
W_BEGDA = '20010101'.
W_PERNR = '00000001'.
CALL FUNCTION 'HR_PAYROLL_PERIODS_GET'
       EXPORTING
            get_begda       = w_begda
       TABLES
            get_periods     = it_t549q
       EXCEPTIONS
            no_period_found = 1
            no_valid_permo = 2.
CHECK sy-subrc = 0.
CALL FUNCTION 'HR_TIME_RESULTS_GET'
       EXPORTING
            get_pernr             = w_pernr
            get_pabrj             = it_t549q-pabrj
            get_pabrp             = it_t549q-pabrp
       TABLES
            get_zl                = it_zl
       EXCEPTIONS
            no_period_specified   = 1
            wrong_cluster_version = 2
            no_read_authority     = 3
            cluster_archived      = 4
            technical_error       = 5.
NOTE: it_zl-iftyp = 'A'   absence
      it_zl-iftyp = 'S'   at work
INIT_TEXT     To load long text into SAP
K_WERKS_OF_BUKRS_FIND     Return a list of all plants for a given company code.
LIST_FROM_MEMORY     Retrieves the output of a report from memory when the report was executed using SUBMIT... EXPORTING LIST TO MEMORY. See also WRITE_LIST.
LIST_TO_ASCII     convert an ABAP report (displayed on screen) from OTF to ASCII format
MBEW_EXTEND
Get the stock position for the previous month. This displays the same info that you see in MM03.
MONTH_NAMES_GET     It returns all the month and names in repective language.
MONTH_PLUS_DETERMINE     Add or subtract months from a date. To subtract a month, enter a negative value for the 'months' parameter.
Example:
data: new_date type d.
CALL FUNCTION 'MONTH_PLUS_DETERMINE'
EXPORTING
    months        = -5       " Negative to subtract from old date, positive to add
    olddate       = sy-datum
IMPORTING
   NEWDATE       = new_date.
write: / new_date.
MS_EXCEL_OLE_STANDARD_OLE     will build a file, and automatically start Excel
OTF_CONVERT     wraps several other function modules. Will convert OTF to ASCII or PDF
POPUP_TO_CONFIRM_LOSS_OF_DATA     Create a dialog box in which you make a question whether the user wishes to perform a processing step with loss of data.
POPUP_TO_CONFIRM_STEP     Create a dialog box in which you make a question whether the user wishes to perform the step.
POPUP_TO_CONFIRM_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point during an action.
POPUP_TO_CONFIRM_WITH_VALUE     Create a dialog box in which you make a question whether the user wishes to perform a processing step with a particular object.
POPUP_TO_DECIDE     Provide user with several choices as radio buttons
POPUP_TO_DECIDE_WITH_MESSAGE     Create a dialog box in which you inform the user about a specific decision point via a diagnosis text.
POPUP_TO_DISPLAY_TEXT     Create a dialog box in which you display a two line message
POPUP_TO_SELECT_MONTH     Popup to choose a month
POPUP_WITH_TABLE_DISPLAY     Provide a display of a table for user to select one, with the value of the table line returned when selected.
PRICING     Return pricing conditions in an internal table. Use structure TCOMK for parameter COMM_HEAD_1, and structure TCOMP for parameter COMM_ITEM_1, and set CALCULATION_TYPE to B. The pricing conditions will be returned in XOMV. You must fill TCOMP, and TCOMK with the appropriate values before callling the function in order for it to work.
PROFILE_GET     Read an Entry in an INI File on the frontend
PROFILE_SET     Write an Entry in an INI File on the frontend
READ_TEXT     To load long text into SAP
REGISTRY_GET     Read an Entry from the Registry
REGISTRY_SET     Set an entry in the Registry
RFC_ABAP_INSTALL_AND_RUN     Runs an ABAP program that is stored in the table PROGRAM when the MODE = 'F'. Table WRITES contains the ouput of the program. Allows you to run a program without having the source code in the target system.
RH_GET_ACTIVE_WF_PLVAR     Return the active HR Plan
RH_GET_DATE_DAYNAME     return the day based on the date provied
RH_START_EXCEL_WITH_DATA     starts Excel with the contents of an internal table. This function finds Excel in the desktop registry. It also uses a local PC working directory to save the file (that's what the 'W' value for data path flag does). Very transparent to user!
RH_STRUC_GET     Returns all related org info
RHP0_POPUP_F4_SEARK
is a matchcode for any type of HR Planning object, including the possibility to fill the field that you want
Example:
Examples: search for any organizational structure
           F4 = 'X'
           PLVAR = '01'
           OTYPE = 'O '
          search for any persons
           F4 = 'X'
           PLVAR = '01'
           OTYPE = 'P '
           MULTI_SELECT = 'X' to allow multiple selection
           EASY = 'X' for user-dependent matchcode
Unfortunately, the use of table BASE_OBJIDS is disabled, so you can't specify
a root for the hierarchy you display
RKD_WORD_WRAP     Convert a long string or phrase into several lines.
RP_CALC_DATE_IN_INTERVAL     Add/subtract years/months/days from a date
RP_LAST_DAY_OF_MONTHS     Determine last day of month
RPY_DYNPRO_READ     Read dynpro, including screen flow
RPY_TRANSACTION_READ     Given a transaction, return the program and screen or given a program and screen, return the transactions that use the program and screen.
RS_COVERPAGE_SELECTIONS     Returns an internal table that contains a formatted list of all the selection parameters entered for a report. Table is ready to print out.
RS_REFRESH_FROM_SELECTOPTIONS     Get the current contents of selection screen
RS_SEND_MAIL_FOR_SPOOLLIST     Send message from ABAP/4 program to SAPoffice.
RS_VARIANT_CONTENTS     Returns the contents of the specified variant in a table.
RSPO_DOWNLOAD_SPOOLJOB     Download the spool from a program to a file. Requires spool number.
RSPO_RETURN_ABAP_SPOOLJOB     Fetch printer spool according to the spool number informed.
RZL_READ_DIR     If the server name is left blank, it reads a directory from local presentation server, otherwise it reads the directory of the remote server
RZL_READ_DIR_LOCAL     Read a directory on the Application Server
RZL_READ_FILE     Read a file from the presentation server if no server name is given, or read file from remote server. Very useful to avoid authority checks that occur doing an OPEN DATASET. This function using a SAP C program to read the data.
RZL_SLEEP     Hang the current application from 1 to 5 seconds.
RZL_SUBMIT     Submit a remote report.
RZL_WRITE_FILE_LOCAL     Saves table to the presentation server (not PC). Does not use OPEN DATASET, so it does not suffer from authority checks!
SAP_CONVERT_TO_XLS_FORMAT     Convert data to Microsoft Excel format.
SAPGUI_PROGRESS_INDICATOR     Display a progress bar on the SAP GUI, and give the user some idea of what is happening
SAVE_TEXT     To load long text into SAP
SCROLLING_IN_TABLE     If you are coding a module pool and using a table control, you can use this function SCROLLING_IN_TABLE to handle any scrolling. (provided by Paul Kjaer)
SD_DATETIME_DIFFERENCE     Give the difference in Days and Time for 2 dates
SO_NEW_DOCUMENT_ATT_SEND_API1     Send a document as part of an email. The documentation is better than normal for this function, so please read it.
SO_SPLIT_FILE_AND_PATH     Split a fully pathed filename into a filename and a path.
SO_SPOOL_READ     Fetch printer spool according to the spool number informed. See also RSPO_RETURN_ABAP_SPOOLJOB
SO_WIND_SPOOL_LIST     Browse printer spool numbers according to user informed.
SWD_HELP_F4_ORG_OBJECTS
HR Matchcode tailored for organizational units. Includes a button so that you can browse the hierarchy too.
SX_OBJECT_CONVERT_OTF_PDF     Conversion From OTF to PDF (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_PRT     Conversion From OTF to Printer Format (SAPScript conversion)
SX_OBJECT_CONVERT_OTF_RAW     Conversion From OTF to ASCII (SAPScript conversion)
SXPG_CALL_SYSTEM     you can check the user's authorization for the specified command and run the command. The command runs on the host system on which the function module is executed. The function module is RFC capable. It can therefore be run on the host system at which a user happens to be active or on another designated host system at which an R/3 server is active.
SXPG_COMMAND_CHECK     Check whether the user is authorized to execute the specified command on the target host system with the specified arguments.
SXPG_COMMAND_DEFINITION_GET     Read the definition of a single external OS command from the R/3 System's database.
SXPG_COMMAND_EXECUTE     Check a user's authorization to use a command, as in SXPG_COMMAND_CHECK. If the authorization check is successful, then execute the command on the target host system.
SXPG_COMMAND_LIST_GET     Select a list of external OS command definitions.
TERMINAL_ID_GET     Return the terminal id
TH_DELETE_USER     Logoff a user. Similar results to using SM04.
TH_ENVIRONMENT     Get the UNIX environment
TH_POPUP     Display a popup system message on a specific users screen.
TH_REMOTE_TRANSACTION     Run a transaction on a remote server. Optionally provide BDC data to be used in the transaction
TH_USER_INFO     Give information about the current user (sessions, workstation logged in from, etc)
TH_USER_LIST     Show which users are logged into an app server
TMP_GUI_DIRECTORY_LIST_FILES     Retrieve all of the files and subdirectories on the Presentation Server (PC) for a given directory.
When a value other than * or . is used for the filter, you will not get any directories, unless they match your wildcard filter. For example, if you entered *.png, then only files and directories that end in png will be returned by the function.
Example:
data: lc_directory         like bdschko16-target_dir value 'C:\TEMP\',
       lc_filter(20)        type c default '.'.
       li_file_count        type i,
       li_dir_count         type i,
       ltab_dir_table       like sdokpath occurs 0 with header line,
       ltab_file_file_table like sdokpath occurs 0 with header line.
call function 'TMP_GUI_DIRECTORY_LIST_FILES'
exporting
    directory        = lc_directory
    filter           = lc_filter importing
    file_count       = li_file_count
    dir_count        = li_dir_count
tables
    file_table       = ltab_file_table
    dir_table        = ltab_dir_table
exceptions
    cntl_error       = 1
    others           = 2.
UNIT_CONVERSION_SIMPLE     convert weights from one UOM to another.
UPLOAD     upload a file to the presentation server (PC)
UPLOAD_FILES     Will load one or more files from app or presentation server
WEEK_GET_FIRST_DAY     For a given week (YYYYMM format), this function returns the date of the Monday of that week.
WRITE_LIST     Useful for writing out the list contents that result from the function LIST_FROM_MEMORY.
WS_DOWNLOAD     Save Internal Table as File on the Presentation Server
WS_EXCEL     Start EXCEL on the PC
WS_EXECUTE     execute a program on a windows PC
WS_FILE_DELETE     Delete File at the Frontend
WS_FILENAME_GET     Call File Selector
WS_MSG     Create a dialog box in which you display an one line message
WS_UPLOAD     Load Files from the Presentation Server to Internal ABAP Tables
WS_VOLUME_GET     Get the label from a frontend device.
WWW_LIST_TO_HTML     After running a report, call this function to convert the list output to HTML.
hope it will help you.
Regards,
Sreelatha gullapalli

Inbound function module !

How to analyze an inbound idoc function module ?

Hi,
You may put a break point in the inbound FM, and use transaction WE19 to debug your inbound FM step by step.
Hope it helps,
Chang

Sun WorkShop 10 Errors

Hi All,
Thanks to all who helped me to resolve the last error.
Now I am again with some troubles..
I am compiling my code in Sun workshop 10 in Solaris 10
in x86 box.
My CC version is
CC: Sun C++ 5.7 Patch 117831-05 2005/11/11
I am getting the following compile time errors.
CC -c -PIC -DOPTIMAL -I/gsp-dist/blr/developer/pradeepk/tmp/IOP/IOP_Source/src/include -I/usr/dt/include -I/usr/openwin/
include -I. -DSolaris -DSolaris2_10 +w SockXCommon.c -o SockXCommon.o
"/usr/include/sys/signal.h", line 85: Error: siginfo_t is not defined.
"/usr/include/signal.h", line 111: Error: siginfo_t is not defined.
"/usr/include/signal.h", line 113: Error: siginfo_t is not defined.
"/usr/include/signal.h", line 113: Error: There must be an identifier to declare.
"/usr/include/signal.h", line 113: Error: "," expected instead of ")".
"/usr/include/signal.h", line 265: Error: "sigtimedwait(const sigset_t*)" is expected to return a value.
"/usr/include/signal.h", line 113: Warning: The last statement should return a value.
"/opt/SUNWspro/prod/include/CC/./new", line 32: Error: operator new(unsigned) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 35: Error: operator delete(void*) was declared before with a different language.
"/opt/SUNWspro/prod/include/CC/./new", line 37: Error: operator new[](unsigned) was declared before with a different languag
e.
"/opt/SUNWspro/prod/include/CC/./new", line 40: Error: operator delete[](void*) was declared before with a different languag
e.
"/opt/SUNWspro/prod/include/CC/./new", line 53: Error: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 54: Error: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 55: Error: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/./new", line 56: Error: Only one of a set of overloaded functions can be extern "C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 106: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 169: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 185: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 198: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 202: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 206: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 217: Error: Only one of a set of overloaded functions can be extern "
C".
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 225: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 239: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 249: Error: Template declarations cannot have extern "C" linkage.
"/opt/SUNWspro/prod/include/CC/Cstd/rw/iterator", line 264: Error: Template declarations cannot have extern "C" linkage.
Compilation aborted, too many Error messages.
*** Error code 1
make: Fatal error: Command failed for target `SockXCommon.o'
Thanks in advance
Pradeep

I suspect that the IOP directory tree has files that override the system libraries in /usr/include or the compiler's own C++ headers.
Try this: Add -H to the compiler options and direct standard error to a file. The -H option lists the path to every included file, indented to show what file causes an inclusion.
If you find that files with names corresponding to system headers are being picked up from an IOP subdirectory, that is a likely reason for errors like siginfo_t not being defined.
Another possible source of errors is providing declarations of standard templates, types, functions, or data in your own code. User code should never declare standard entities, but include the appropriate standard header instead. The reason is that implementations are allowed some leeway in how standard entities are declared, and the declaration you provide might not match the one provided by the implementation.
Another aid to investigating these problems is to replace the -c option with -E, and direct standard output to a file. The file will show the result of all file inclusions, expand all macros, and show where every line of code comes from. Given an error message about about a declaration, you can scan backwards in the file to find an eariler declarat on that causes the error message.

Sun Workshop Analyzer Function/Modules corrupted

Similar Messages

Maybe you are looking for