Sun would like your help with the "System Name Already In Use" error

A couple of users have reported getting an erroneous "System Name Already in Use" error when re-registering a system after a fresh Solaris re-install. We'd like your help in tracking down this problem.
The scenario is this:
* Install Solaris 10 and register with updatemanager,
* Wipe out the installation and re-install Solaris.
* re-register with updatemanager.
The system erroneously reports that the system name is already in use. It is supposed to detect a duplicate registration of the same system.
We have not been able to reproduce this error in our lab.
If this has happened to you, would you let us know at [email protected]?
Here are the things that we would like to ask of you:
* If you run "updatemanager -debug" if will create a log file /tmp/basicreg<timestamp>.log.
* Details on the exact hardware you have (make/model/configuration).
* Details on the steps you took to get to the bad state. REALLY detailed!
Thanks!
Based on what we know now, we believe you can work around the issue by either:
* Changing the host name and re-registering.
* Creating a different user account and registering the host to that account.
Some previously-posted workarounds are known NOT to work:
* Wait 24 hours and try again.
* Do some "ccr" incantations and try again.

Hi,
Can you drop me an email as i am a sun employee and i will be able to check if the swup frontline team have received any support cases on this issue and then we can work with you directly to resolve the issue.
Scott Wallace

Similar Messages

Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t fin

Adobe Creative Cloud - Photoshop CC / Photoshop CC (2014) i had first install Photoshop CC with some actualizations , I have install now Photoshop CC (2014) without desinstalling Photoshop CC... I would like stay only with the 2014 version but i don´t find more the desinstaller of old CC version and the 2 versions takes a lopt of space on my disk... is it normal or is there a necessity to stay with the 2 versions... Now I use only the 2014 version but the old version is always there ????

Topic or subject titles should be clear, pertinent and concise so that individual users can tell at a glance if they can help or not.
That field is not for attempting to fit your entire question in there.
Please keep this in mind next time you post. Thank you.

Please, could you help with The System Error?

Hi guys,
Please could someone help me with The system error: The Parameter is incorrect? which appears on the screen when I open Adobe Photoshop?
It is Starter edition3.0 and so far it worked ok and suddenly this message haunts my screen. If I clic OK, whole application disappears. I tried hundred times and checked it is 5.1.2600 and my notebook has got Windows XP Profesional.
Any advice hunging around?
ThaaankxJ

Thank you mark, I'll try.
J
Date: Fri, 18 Mar 2011 17:17:20 -0600
From: [email protected]
To: [email protected]
Subject: Please, could you help with The System Error?
Hi orion,
Sorry that was the impression made by the support agent. If the version of the software that you have is 3.0 or 3.2, then the catalog can be upgraded when you run the trial version of Photoshop Elements. Version 8 had no time limitations, not sure if version 9 will timeout after 30 days or not.
Just install, and when you launch, Elements will automatically convert the catalog to a format that it can read.
-Mark
>

HT5767 My mail all of a sudden would not allow me to delete messages in my inbox saying, "couldn't be copied to "Messages" because an item with the same name already exists." Found it duplicates the message I wanted deleted in trash.

Still using the @mac.com mail address and up to date on everything, but have not gone to Maverick. All of a sudden Mail wouldn't let me delete. Said that title of email was already in trash. And sure enough it was. Clicking on the help button on the message gets Nothing.
The selected topic is currently unavailable.
The topic you were trying to view could not be found.
"couldn’t be copied to “Messages” because an item with the same name already exists."
Any ideas. My mail is not tied to gmail etc.. just all by it's lonesome.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, or by corruption of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled on some models, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output and Wi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

I would like to call through the CIS UCPM API but following error occurred

I would like to call through the CIS UCPM API but following error occurred, I would like to to set Loacle Chinese, how can I do? Thank you
intradoc.common.ServiceException: !csUnableToRetrieveSearchResults!csLocaleNotFound,English-US
at intradoc.server.ServiceRequestImplementor.buildServiceException(ServiceRequestImplem
entor.java:2115)
at intradoc.server.Service.buildServiceException(Service.java:2326)
at intradoc.server.Service.createServiceExceptionEx(Service.java:2320)
at intradoc.server.Service.createServiceException(Service.java:2315)
at intradoc.server.ServiceHttpImplementor.determineParameterizedLocale(ServiceHttpImple
mentor.java:668)
at intradoc.server.ServiceHttpImplementor.initLocale(ServiceHttpImplementor.java:467)
at intradoc.server.Service.initLocale(Service.java:426)
at intradoc.server.Service.initDelegatedObjects(Service.java:295)
at intradoc.server.SearchService.initDelegatedObjects(SearchService.java:86)
at intradoc.server.ServiceManager.processCommand(ServiceManager.java:436)
at intradoc.server.IdcServerThread.processRequest(IdcServerThread.java:265)
at intradoc.server.IdcServerThread.run(IdcServerThread.java:160)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImp
l.java:545)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)

I managed to find a solution to my problem described above. I downloaded a demo copy of the shareware called R-Tools which I found on Tucows.com
The site described the software thus: "Take advantage of R-Studio's unique ability to recover files and disks on remote computers, even if their partition structures are damaged or deleted."
The demo software searched my ipod and found all my photos and showed them as thumbnails. Of course the demo software would not save the files unless I registered it which cost US$49.95. There are several different suites of applications from this publisher, I got the cheapest option which is called "R-Studio FAT".
I didn't mind paying this amount because the photos were very precious to me and by this point I had just about resigned myself to losing them all. I had previously contacted a professional data recovery service and they had quoted me "AUD$80 per hour and probably 1 to 2 hours work".
I've been too busy organising my newly recovered photos into galleries and editing them using photoshop to be bothered to try and fix my ipod which I doubt I will want to use again for photo storage.

One particular plug-in that I am trying to install reports 'an engine with the same name already exists.' However I cannot find it, even using the troubleshooting routines

Hi,
I am trying to install a add-on that will enable Google to behave as if I am in the USA. When I try to install the add-on I get a message which says 'An engine with the same name already exists'. However, I can find no evidence of the add-on and I have been through the various troubleshooting routines. Anybody know of a way around this?
I have looked at the list of installed plugins and cannot see it. So whty does does FireFox think it's there?

Hey oks10,
It sounds like the Bing plugin might have been corrupted. I would bet that it's still installed, but not working. Try removing it from the \searchplugins\ folder in your [http://support.mozilla.com/en-us/kb/Profiles#How_to_find_your_profile profile folder].
I'd close and restart everything after you are done, then try installing it again.

A workflow with the same name already exists.

Hi, whenever I am trying to create a workflow in my MOSS teamroom, I am getting the error "A workflow with the same name already exists". I am getting this error message no matter what name I give. I checked all the lists and document libraries to see if there are any workflows but that doesnt seem to be the case. I opened the site in SPD and there also no workflows are listed.
Any insight will be appreciated.xwindow

I know it is a bit outdated but someone might found this helpful:
The other possible problem could be that the SPD lost connection with the Sp site for a sec but on the local machine there is a workflow with that name. ( In this case if you try to rename your workflow it gave you the same error message )
So have a look in SPD click on All files then select Workflows and delete the workflow that is causing the problem.
After this exercise you will be able to rename or re save your Workflow.

Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists.

each time I open Fire Fox I get this error "Firefox could not install the search plugin from "chrome://tnt2toolbar/content/yos.xml" because an engine with the same name already exists." and
I can't search for anything. HELP!!!
Thanks
Tom

That is a problem with an extension that tries to install a search bar. The tnt2toolbar should give you a clue about which extension. You didn't add troubleshooting information with the list of installed extensions, so I can't give a suggestion about which extension is causing this.
You can check for problems with preferences.<br />
Rename or delete the prefs.js file and possible numbered prefs-##.js and user.js files to reset all prefs to the default value.
*http://kb.mozillazine.org/Preferences_not_saved
*http://kb.mozillazine.org/Resetting_preferences
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

Could not complete your request because the file is already in use or was left open by another application

the message :could not complete your request because the file is already in use or was left open by another application, comes up when i try to open a specific file in PS cs5. nothing is open and i have restarted my imac already and still no solution

Well, then you do want your layered file back and the nice thing about Macs, Time Machine does keep hourly backups on your Mac. You should be able to enter Time Machine and restore that file.
I had hoped opening your file in another app might relase it so you could open it in PS.
Gene

Cannot delete read mail. Keep getting the following message "926540.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

I am trying to free up room on my hard drive but keep getting the following message. “926540.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. 926540.emix is the number given to the email I want to delete. This message appears (with a different .emix number) when I try to delete any mail. I have junk mail from 2014 to 2009 that I want to delete

Back up all data. Rebuild the mailbox. Try again to delete the message.

When deleting messages I get this message:"74608.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How can I fix this problem?

When trying to delete messages in mail, I've been getting this message:“74608.emlx” couldn’t be copied to “Messages” because an item with the same name already exists." The numbers at the beginning are always different but the ".emlx" and the rest of the statement is always the same. How can I fix this problem?
Thanks
Candy777

HT2500 Error when deleting email: Apple Support Communities

"91590.emlx" couldn't be copied to "Messages" because an item with the same name already exists. How do I fix this?

The delete button in Mail gives me this message: “91590.emlx” couldn’t be copied to “Messages” because an item with the same name already exists. The only thin that has changed is an OS update last evening. (Mountain Lion)

Thanks...it was spooky seeing the mail in my box suddenly disappear and blank after going to Mailbox and Rebuild. But "poof" it was up again and was able to delete without the messages telling me it had a duplicate in trash (which it did). Solved the problem.

Messages could not be moved to the mailbox "Trash - "122730.emlx" couldn't be copied to "Messages" because an item with the same name already exists.

Cannot move messages from mail to trash. Get the following message: messages could not be moved to the mailbox “Trash — “122730.emlx” couldn’t be copied to “Messages” because an item with the same name already exists.

I just started having the same problem but have found no solution.

InD blocking Ps to save a file / Could not save * because the file is already in use error

Many users have reported a Photoshop Could not save * because the file is already in use error in many different circumstances.
I place raw jpgs in InDesign document, then open them in Photoshop via Edit original order to adjust them. On random occasions Ps gives me that annoying error. So i found a little trick to avoid saving that image under a different name and relinking it plus reloading Ps since the error repeats on other pictures to.
All you have to do is: when Ps gives error, (Cmd-Tab) switch to InD, directly select the worked jpg in image frame (one that you try to save in Ps) and simply move it left-right (or move it and Undo). Now you can save it without problem.

JPEG is a "lossy" compression format. Every time you save as jpeg you recompress and throw away a little more information. In addition, jpeg does not support transparency or layers, both very useful features for woring with images. For example, you can add an adjustment layer in Photoshop to do your adjustments non-destructively for may of the things that you can do using Image > Adjustments... which will change your pixel data permanently. Throw away an adjustment layer and you image data is untouched. Also, ID allows you to place a layered image and control layer visibility from within ID, making it possible to multi-purpose a single file by showing or hiding various layers.

Help with "The end of file was reached" error message in Outlook 2011

Hello, I am having an issue with Outlook 2011 that after 24 hours or so I am getting a “The end of file was reached” error message code -17895.
Right after this error I get a disconnected from Exchange server and even after re opening the client it stays like this for about 5 minutes then restores. Has anyone else seen this error? I am able to reproduce this on multiple machines with multiple Exchange
2010 mailbox accounts.

Same situation here:
Outlook 2011 for Mac using Office 365, 3 users have reported the End of File Reached error when trying to send email.
I have logged a ticket with Microsoft support and they have followed up with the following directions.
1.
Repair Disc Permissions On A Mac
o
1
Log in to your computer with the administrative account. Open the hard drive, go into the "Applications" folder and then open the "Utilities" folder. Now launch the Disc Utility application.
o
2
Select your main hard drive. You'll probably see two options--one is the manufacturer's name of the disc and the other name is what you've called it. Choose the name of your hard drive.
o
3
Click on "Verify Disc Permissions" and the computer will perform a diagnostic test. After a few minutes, the problems with disk permissions will be reported in the Disc Utility window.
Click on "Repair Disc Permissions" to fix them.
o
4
Insert your Mac OS X installation disk and restart your computer. Hold down the "C" key on your keyboard to boot from the disk rather than your computer's hard drive. Cancel the OS
installation and open Disc Utility.
o
5
Click on "Verify" to have Disc Utility check your computer's hardware. Notice that this option is only available when the program is run from the CD. You can only test the hardware
of a computer that isn't running the program locally.
o
6
Use Disc Utility to try and repair any hardware errors that it detects. Usually fixing the permissions will be enough to maintain your computer. If you still experience frequent lockups
and crashes, then you should try repairing it with this method.
Tips & Warnings
If you use your computer for high-performance work, such as software compiling or video editing, then you may want to check the permissions weekly. Most computer users will only need
to fix permissions after noticing problems with applications or the operating system.
If the computer's performance does not improve after repairing permissions, then you'll have to troubleshoot for other issues. You may want to purchase more RAM for your computer to
help speed it up.
Permissions repairs will not correct problems caused by applications that did not use Apple's installer. Try deleting all files associated with the application and then reinstalling
it.
Avoid repairing the permissions after you've booted the computer from the OS X CD. It won't cause problems to your drive, but the version of "Disc Utility" on the CD may not be updated
to address permission changes that are required by certain software updates.
Secondly, the information for repairing an Outlook 2011 database is as follows:
http://support.microsoft.com/kb/2360509

Sun would like your help with the "System Name Already In Use" error

Similar Messages

Maybe you are looking for