Sun x4170 ILOM - Can't get to the web interface 2 days after password reset

Just bought a used x4170. I was able to get iLOM on the network and get to the web interface logon screen after setting the IP for it.
I tried logging on but the password was not given to me. So I connected to the serial interface (rj45) from another machine and used putty to connect. Got to the preboot point and was able to reset the password to default, Rebooted.
I was then able to log into iLOM. That was 2 days ago. Today for some reason, I can't get into iLOM. It pings but I can't get to the web interface. I get the IE error "cannot connect" or unable to connect or something like that.
I'm completely new to this brand of server so consider me completely ignorant on all aspects of the hardware.......lol
Thanks

Hello
By default, you connect to the server’s service processor (SP) using the out-of-band network management port (NET MGT). The ILOM sideband management feature enables you to select either the NET MGT port or one of the server’s Gigabit Ethernet ports (NET 0, 1, 2, 3), which are in-band ports, to send and receive ILOM commands to and from the server SP. In-band ports are also called sideband ports.
You can refer more here : https://docs.oracle.com/cd/E19269-01/820-7959-11/820-7959-11.pdf
If you want to use the NET MGT port of ILOM, then your output should display similar to below
-> show /SP/network
/SP/network
    Targets:
        interconnect
        ipv6
        test
    Properties:
        commitpending = (Cannot show property)
        dhcp_clientid = none
        dhcp_server_ip = xxxxxxxxx
        ipaddress = xxxxxxxxx
        ipdiscovery = dhcp
        ipgateway = xxxxxxxxx
        ipnetmask = xxxxxxxxx
        macaddress = 00:10:E0:65:2F:20
        managementport = MGMT   <<<<<<<<<<<<<<
        outofbandmacaddress = 00:10:E0:65:2F:20
        pendingipaddress = xxxxxxxxx
        pendingipdiscovery = dhcp
        pendingipgateway = xxxxxxxxx
        pendingipnetmask = xxxxxxxxx
        pendingmanagementport = MGMT    <<<<<<<<<<<<
        pendingvlan_id = (none)
        sidebandmacaddress = 00:10:E0:65:2F:21
        state = enabled
        vlan_id = (none)
Hope this helps.
Best Regards
Bhavyesh

Similar Messages

  • How can I get back the Web Clip widget in Dashborad?

    Dear all,
    I accidentally deleted the Web Clip widget together with the Web Clip.wdg in Library/Widgets/ folder by AppCleaner some time ago. Now I cannot use this function to clip content in pages. I have the widget icon in Safari and can crop the webpage without problems, but after I did this action, nothing appeared or happened in the Dashboard since the original web clip widget file is gone.
    I would like to know where and how I can get back the Web Clip.wdg file so that I can perform the Web Clip function again?
    I just saw a user who posted a similar topic on Dec 28, 2008 and his/her problem is solved. I have this same problem like his/hers.
    I would appreciate if anyone can help me, thanks!

    Hi,
    Thank you very much for your help.
    I have tried to use Time Machine to get back the Web Clip but still couldn't, and very strange is when I click Time Machine, I can only choose Windows Applications as the back up disk but not Macintosh Applications, so I cannot restore anything from Macintosh applications.
    I think the best is if anyone has this widget on their Mac and can kindly send it to me by e-mail?
    I would appreciate it so much.

  • How can I find out the web interface a module function is executed from?

    Hello all,
    I was wondering if anybody knows how would be possible de determine the web interface a function is being launched from, within the function.
    I've got this function that is used for a exit variable that updates the variable value depending on another variable in a web interface. The thing is that this very same function and variable will be used in many web interfaces and the "source" variable will be different for each mask.
    So, for example, mask 1 will have variable 1 as a selector variable and variable X will be updated by it. Then I also have variable 2 in mask 2 as a selector variable and variable X will be updated by it as well.
    I want to develop a code, within the function module, that depending on the web interface that is calling it, it will use a source the correct variable and for this I need to know which web interface is calling the function.
    I hope to have been able to explain myself clearly. It's a purely technical question.
    Thanks in advance.
    Best regards.

    Hi Francesco,
    Are you talking about that ??? )) It will explain you about to get the name of the web page when you are executing an abap function for determining the values of variables...
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/g-i/how%20to%20make%20a%20variable%20even%20more%20flexible%20in%20bw-bps.pdf">How to make a variable even more flexible in BW-BPS?</a>
    This is weird: I wrote that document a few weeks ago, it is theorically published on SDN but this is not possible to find it by using the research tool... Maybe because it applies only to BPS in 3.5. I did not have enough time to migrate that solution to BI-IP 7.0.
    Regards
    Laurent

  • Can't get onto the Internet on XP after partition

    Please help..
    I can't seem to get onto the internet from XP I have to move to the mac petition to get online? What can I do to solve this. I can see my wireless network I just can't connect to it. I used boot camp to partition the drive

    If you are using Boot Camp, you should probably post your question in the Boot Camp forums
    http://discussions.apple.com/category.jspa?categoryID=237

  • HT4623 Can't get past the software licence screen after updating iPhone

    How do I get past the Software licence agreement screen? I updated my iPhone and although I have hit "I agree" repeatedly, the screen remains! If I press the Home button, I get the options Emergency Call and Cancel.

    Contact Apple Support:
    http://www.apple.com/uk/contact/

  • N8 - How to get back the Web-Tv Channels after a r...

    I resetted my N8 and now the by default installed web-tv channels (paramount, nat. geo etc) are lost. is there any possibility to get them back? (i dont want to hack my phone)
    besides why arent these channels available in the ovi store? @nokia
    thanks in adavance

    @ravi85_india
    Have a look a bit closer to home:http://blog.logonaniket.com/restore-default-n8-content-after-format
    Happy to have helped forum with a Support Ratio = 42.5

  • How can I get ipod touch to update software after being reset?

    I recently reset my ipod touch so I could sell it. It seemed to reset fine but now will not allow any software updates. It currently has 2.1 and gives an error message when trying to update saying there is a hardware problem.

    What is the exact wording of the erro message?
    This may help
    iTunes: Specific update-and-restore error messages and advanced troubleshooting

  • Can't get to iCloud web page on iPhone, iPad

    Set up iCloud and it's syncing and pushing everything as expected. Have no problem getting to the iCloud web page on my Mac (using Safari), but when I try to get to the web interface on an iPhone or iPad, I'm always just redirected to the iCloud "Hot to set up iCloud" page. I'm never able to reach the log-in page.
    Are others able to sign in to the web iCloud page thru their iDevices?

    Learned on another forum that that's the intended behavior. On iDevices you just use iCloud as a service, you don't interact with it.
    Would be nice of Apple to make that clearer, rather than just sending all iDevices to page of instructions...

  • Can't login to router web interface anymore (Authentication Required fails)

    After upgrading to Firefox 9.0.1 (or another recent version), I can't login to the web interface of my router anymore, even though I can login with other browsers.
    I've tried to login to 192.168.1.1 using Firefox 9.0.1 and my saved credentials (admin/********), but the authentication pop-up just showed up again. The same thing happened when I manually entered the same information. Using safe mode and/or private browsing didn't help either.
    To be sure that is was a problem with the Firefox browser, I wrote the address, login and password in a text file, then copied-&-pasted the information into both Firefox and Google Chrome. The result: after repeating this a couple of times, it always worked on Chrome and never on Firefox.
    The login process used to work flawlessly with previous versions of the browser, but I'm not sure if the problem appeared on 9.0.1 or the version before.

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    Create a new profile as a test to check if your current profile is causing the problems.
    See "Basic Troubleshooting: Make a new profile":
    *https://support.mozilla.org/kb/Basic+Troubleshooting#w_8-make-a-new-profile
    There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
    If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
    See:
    *http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    I downloaded 11.1 but now can't access the store, can only view my library. I've reinstalled but still get a blank, white screen when I try to go to the itunes store. How can I get to the store for purchases?

    In iTunes prefs>Store - is the Store check box unchecked?
    Did you repair pemissions with Disk Utility?
    MJ

  • How can I get just the text to resize, rather than the entire web page?

    I used to be able to re-size just text on a webpage by typing Ctrl + +. Today, the entire webpage re-sizes, and when I move to another page it reverts. (I see this mostly in Facebook.). Why did this change, and can I go back to having just the text re-size?

    ''How can I get just the text to resize -- zoom text only''
    steps
    #"Alt" if no menu bar, then
    # View > Zoom > Zoom Text Only
    Zoom text of web pages - MozillaZine Knowledge Base
    :http://kb.mozillazine.org/Zoom_text_of_web_pages
    <br><small>Please mark "Solved" one answer that will best help others with a similar problem -- hope this was it.</small>

  • I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    I have an iPhone 4 and my lock button is jammed and I also can not touch anything on the left side of my screen well as any pop ups from the phone itself, so i can not get past the set up stage in reset process...how can i fix it/can it be fixed?

    Make an appointment at the genius bar and get the phone replaced.

  • We can't get to the camera roll right now

    I have a dell Latitude 10 table with Windows 8.1 RT. Last week I decided to unload all the pictures from the camera roll to my PC and I did it without a problem, but in the process I removed the camera roll folder under the public pictures library. Since
    then, the camera app is not working and it gives me the following message: "We can't get to the camera roll right now". I've re-created the folder, set the default save location and public save locations to the Public Pictures folder but the error
    keeps popping up every time I open the camera application. If I try to shoot a photo or a video it tells me that it couldn't be saved. How do I set the camera app to use the new folder?

    I had the same Problem, and all experts could not help. I even dowloaded tools that say thy would fix the problem. Anyway as a matter of fact it still is a computer, no magic.
    I found a way: Open regedit, search for "User Shell Folders".
    Then check all the directories.
    In my case one of the directories refered to the one I deleted. I just changed it and restarted my computer.
    On my iconia it saves into this key:
    I changed it | Keep the Name of the folder "Camera Roll" depending on your language it will rename the folder in the Explorer library automaticly. (in Germany to Eigene Aufnahmen)
    {AB5FB87B-7CE2-4F83-915D-550846C9537B}
    D:\backup pics\Camera Roll

  • When creating a book how can I get all the photos from an album to show up in the order they were in the album?

    When creating a book in iphoto, how can I get all the photos from the album I want to use to show up in the order that they are in the album?  When I tried to use the option to add my own photos instead of having the program "flow" them, they showed up all mixed up.

    iPhoto puts them in the book in chronological order.  So to get your photos from an album into an iPhoto book in the same order you will need to use the Photos ➙ Batch Change ➙ Date menu option and set them all to the same date with a 1 minute time difference between each. 
    OT

  • Firefox connects to google-analytics for some sites, and then gets stuck, and I can never get onto the site. How do I prevent Firefox from connecting to google-analytics? I use XP with service pak 3 in English

    Firefox connects to google-analytics for some sites,when i click on links in websites or emails and then gets stuck, and I can never get onto the site. Or opens a new bower behind the one i'm usind that's blank i don't even know it's there untill i close the one i'm using. How do I prevent Firefox from connecting to google-analytics? Or opening a blank bowser behind the one i'm using. I use XP with service pak 3 in English
    == This happened ==
    A few times a week
    == a couple months ago

    I got the same issue.
    I go on a website and all the sudden another window pops up with "results.google-analytics.com" or "search.google-analytics.com". It has often ads for other sites for example. black single dating site
    how can I can I stop that from happening again?
    I didn't download or do anything, just visit websites, that I visit on a regular basis.
    OS: Windows XP
    Firefox Version: 3.6.6

Maybe you are looking for

  • Adobe Creative Cloud crashes immediately on launch, won't run on a new iMac 5K / Yosemite.

    Adobe Creative Cloud installer (/Applications/Utilities/Adobe Creative Cloud/ACC/Creative Cloud.app) crashes immediately on launch, so I can't install CC on a new iMac 5K running Yosemite. Launching the app to fetch the rest of the CC programs crashe

  • Apple Tv (3rd Gen) On screen keyboard US Version/UK Version

    I have recently bought the Apple tv from Amazon UK and was supplied with the US version, and I guess the only difference is the power cord ? What I would like to know is on some of the on screen keyboard down the bottom right you have .com .au etc (S

  • What event does FMS server fire when a clients starts/stops streaming

    I want to log activities on my stream (both live and recorded) using a web service I've made. In the FMS server side AS3 documentation I can find events for onconnect/ondisconnect, but that is not quite what I want. What I want is and event that fire

  • Hiding buttons based up on business role; Is possible by the BASIS?

    Hi Experts, I have done one enhancement for hiding the buttons according to Business role using coding but it was not possible for all the desired buttons since I couldnu2019t find out relevant internal tables for the buttons. Now we are planning to

  • Handling event in subVI

    Hi all, I register an event (value change for a boolean array) in a subVI.  I connect the refnum with the dynamic event connector (event loop) the in the higher level VI.  So the loop will fire when the subVI's boolean array change. It works well onl