Sundance Channel-Advertised as available when it is not

I just started with FIOS about a week ago. We now have FIOS TV Prime HD. The Sundance Channel was advertised in black in white in the channel guide as being available on Prime. It is not.
We then ordered the Showtime-Starz Entertainment Pack. The Verizon website clearly states that Sundance is available with this "Pack." It is not. Thus we've now ordered two TV services that are not as advertised.
Does Verizon see a problem here, or is being loose with the facts just part of the marketing strategy?
(We tried to take this up with Customer Service both on chat and on the phone. Talking to Verizon Customer Service is like talking to a wall. It seems as if they have absolutely no authority to engage in a discussion. Thus they repeat apparent pre-scripted replies repeatedly. I find this very frustrating)

Similar Messages

In content viewer my shared folios say update available when I've not made any update. Why?

Hi, I've created a number of folios which are currently being shared with my clients via Content Viewer. The folios regularly show an "update available" message even when I've not made any update. Can anyone tell me why this happens?
Thanks
Puzzled DPS user

thanks for your reply
Yes, this is a fully paid up account and we are using the Adobe content viewer from the app store. No we do not use any 3rd party software. All folios are created in in-design and uploaded via the folio builder panel within in-design. As far as I'm aware this has happened since we started using DPS about a year ago. We are not hitting the update folio button within in-design, therefore they should not be saying update available.
Attached is a screen shot showing the online folio builder panel today, as you can see all publication dates are today. Should we be locking these folios?
I should also mention when we open in-design all of the folios we have published are still within the folio builder panel (see second screen shot) and being shared.

Type 4 printer driver shows color is available when printer is not a color printer

I am working on migrating to a new Windows Server 2012 print server. I am trying to use the new version 4 printer drivers whenever possible. I have noticed an interesting thing. Here is an example. When I added a new printer, an HP
LaserJet P3005 black and white printer using the HP LaserJet P3004/P3005 PCL6 Class Driver, under "features" it reports Color as "Yes." Now the printer is not color and I have noticed this on all of the other class 4 drivers for black
and white printers. Am I missing something or is this supposed to be this way? The printers do print fine, I just wanted to know why this is showing up like this.

Really a question for HP since it is their software.
BUT: A class driver can be used for a wide range of devices. If the core class driver HP added for the P3005 is also used by devices that support color then the driver itself DOES support color even when the device does not. There
are a couple ways HP could code around this. I do see that HP's PS version of the P3005 does not have a color option in Printing Defaults.
I have seen this type of issue from other vendors on previous operating systems, it's not just HP nor anything specific to class drivers although a class driver would expose this when the software to constrain the feature has not been added by the vendor.
Alan Morris Windows Printing Team

OS X Mavericks Manual - Why state it is available when it is not?

In the OS X Mavericks site, Why indicate a link to OS manual, when there are none for the "Mavericks"?

Hi Histotek,
You may want to make sure that your computer meets the system requirements for upgrading to Mac OS X 10.9 (Mavericks) -
Apple - OS X Mavericks - Read the technical specifications.
http://www.apple.com/osx/specs/
In particular the supported models part is important.
Thanks for using Apple Support Communities.
Best,
Brett L

Data no longer available when SALV_WD_TABLE GET_MODEL called

Hello
I created a view that retrieves data from one table to select a row in the table and proceed to the second view but I get an error like this:
Data no longer available when SALV_WD_TABLE GET_MODEL called
I did check the mapping between my view and the componentcontroller
thank you

There are several possiblities for this error.
1) In your table, is there any field name starts with Number?
2) Is your application 2 level process?( i mean two views? based on alv another alv)
and Please check the below note.
1528254
and below
Data no longer available when SALV_WD_TABLE GET_MODEL called
error while testing a sample web dynpro
If youare binding dynamically check this thread
Assigning data to Dynamic ALV
Regards
Srinivas
Edited by: sanasrinivas on Dec 14, 2011 11:51 AM

Grid Control performance tab not available when on the target home of ASM

I noticed recently that the "Performance" tab/link is not available when you are using 10g Grid Control and you are on the home page of an ASM instance. Can this be explained?

Hi MarGur
I try to help you. The OEM Grid Control in some times not discover the Oracle 9i databases and you must to add manually.
First, check in your target machine that the user owner of agent software have rights of read and write in the ORACLE_HOME directories of Oracle 9i databases.
Go to Grid Control Console
Select Targets ---> Databases
Press Add --> Select the host ebisdb2.oneshield.com and press continue
The automatic discover process begin. When finished is very normal that nor discover the Oracle 9i databases. You press the Add manually button
in the page that appear you must entry all the configuration information of database:
ORACLE_HOME directory
DBSNMP USER
DBSNMP PASSWORD
HOSTNAME
PORT
SID
Check that the dbsnmp user in your database is unlock and press the TEST button to verify the connection work fine.
After this many windows appear of configuration process, and you will put the sys password and host credentials.
If you have problems, tell me
Regards

I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia.

Please help! I have an ipad that I purchased in Australia and my iTunes account is Australian, but when I try and watch Australian TV shows on Australian websites it says that the content is not available because I am not in Australia. How can I fix this?

Are you using a proxy server to access the net?
Or another cause could be that your router thinks it's in its home country (probably china)
I just don't know how to fix it. There's a way but I don't know enough to advise.
You could try googling your router model and 'wrong country' or keywords like that and see if something comes up.

Error Data no longer available when SALV_WD_TABLE GET_MODEL called

Hello ,
I have dynpro component on ECC6.0 POWL_UI_COMP which displayes service oders.
This dynpro component has one more component usage component POWL_TABLE_COMP.
This POWL_TABLE_COMP has used a SALV_WD_TABLE which is for ALV display.
I have to create a on ALV toolbar one button,I know that I have to do this using self defined functions in wddoinit method of
view which uses SALV_WD_TABLE and i could generate a button using self defined fucntions for another dynpro component.
Now I am trying same method for this POWL_TABLE_COMP dynpro which is using SALV_WD_TABle , but its giving error as this
Data no longer available when SALV_WD_TABLE GET_MODEL called .
pl can you suggest on this urgently.
Attching a code to geenrated s self defined function.
DATA: L_REF_CMP_USAGE TYPE REF TO IF_WD_COMPONENT_USAGE.
L_REF_CMP_USAGE =   WD_THIS->WD_CPUSE_ALV( ).
IF L_REF_CMP_USAGE->HAS_ACTIVE_COMPONENT( ) IS INITIAL.
L_REF_CMP_USAGE->CREATE_COMPONENT( ).
ENDIF.
DATA: L_REF_INTERFACECONTROLLER TYPE REF TO IWCI_SALV_WD_TABLE .
L_REF_INTERFACECONTROLLER =   WD_THIS->WD_CPIFC_ALV( ).
DATA:
    L_VALUE TYPE REF TO CL_SALV_WD_CONFIG_TABLE.
L_VALUE = L_REF_INTERFACECONTROLLER->GET_MODEL(
lr_config_table ?= lr_interface_salv_wd_table->get_model( ).
   DATA :lr_buttonui type REF TO CL_SALV_WD_FE_BUTTON.
CREATE OBJECT lr_buttonui.
lr_buttonui->SET_TEXT( 'ACCEPT' ).
DATA button1 TYPE REF TO CL_SALV_WD_FUNCTION.
button1 = lr_config_table->IF_SALV_WD_FUNCTION_SETTINGS~create_function( id = 'LBUTTON' ).
button1->SET_EDITOR( lr_buttonui )
thanks,
Sharada

Hi Sharada ,
I had the same error message.
To resolve the problem I had to bind the context again to the interface controller of the used component.
Alex van Hacht.

Why am I getting messages such as "The command "Image Size" is not currently available" when trying to run an Action that has always worked in the past and when the particular Commands do work if used by themselves?

Why am I getting messages such as "The command Image Size is not currently available whenever I try to run an Action that uses the particular command (and which has always worked fine previously) and when the particular command works fine when used on its own?

I would think that image size would always be available when there is an active document in Photoshop. The only time I remember seeing messages like that where they should work was during the five month period when Adobe released CS6 with so many bugs which took Adobe five months to fix. During those five month messages like that that should not have happen were common when action switch between documents. Adobe would start processing the next Action step before the document switch completed, Any step that required an active document could fail with a mess stating the command is not available.
Are you by some chance using CS6 version 13.0 CS6 without any updates. Use Photoshop menu Help>About Photoshop. If it shows CS6 version 13.0 you need to update CS6. .

Acrobat x standard, win 8, paper sizes Arch A B C D E ... avail when plot to hp plotter, not avail when plot to pdf

Acrobat x standard, using latest win 8, paper sizes Arch A B C D E ... avail when plot to hp plotter, not avail when plot to pdf
any ideas?

You mean add custom sizes ?
I just used postscript sizes in my CAD program, and saved a different printer definition file for each, that worked for cad, look into large pdf's tomorrow.
thx jp

Why am I told that fonts are not available when the file was originally created in Fireworks?

I get the "Fonts not available" message when I open up a document, i.e. open up a png document in the program/computer/etc. where the program was created in the first place.
I don't get this. How can the fonts not be available when I'm using the same program that used these fonts originally? Having said that, the appearance doesn't seem to change.

Are the fonts in question installed on your computer?
Fonts are not part of a program, fonts are installed on a system. Once installed, a font is available to any program that uses fonts. If you're opening a document that was made in the same program, but on a different system, using fonts you do not have installed, then you will get that message.
So... Are you opening a document that you created? Are you opening the document on the same system on which the document was created? Have you made any changes to the installed fonts (installed or uninstalled any fonts)?
What version of Fireworks are you using and what OS are you running it on?

Hello I wanna delete my account. This option isn't available when I click in ''manage account''. My money will be taken in October 29. Please help me.

Hello I wanna delete my account. This option isn't available when I click in ''manage account''. My money will be taken in October 29. Please help me.

I think you are correct, deleting your account is not an option. If you wish to cancel a subscription then you should review the following...
Cancel your membership or subscription | Creative Cloud
https://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

Code insight is not available when eding jsp by using 10.1.3.36.73

I use 10.1.3.36.73 jdeveloper on windows to develop web application,
but code insight is easy not available when editing jsp 2.0.
I must restart jdeveloper and it still isn't often available.
ex. in jsp
ArrayList al = new ArrayList();
for (Iterator it=al.
Code insight is not supported for jsp or this is bug?

Do you still have any code error in your jdev editor? no matter the error is JSP or HTML (it is signed by little red box at the right of the window near scroll bar), code insight sometimes is not available.

Linux RMI lookup takes too long when DNS is not available

I am running Java 6 on Linux and ran into the following problem (please bear with me, there is a lot of background info before the actual question). I have a Java program that uses RMI for IPC. The server binds to localhost and clients lookup on localhost. The following are code snippets for my server and client.
// Server binding code
registry = LocateRegistry.createRegistry(port);
registry.rebind("SERVICE", new ServiceImpl());
// Client lookup code
Naming.lookup("rmi://localhost:" + port + "/SERVICE");As long as DNS works, this code runs just fine. It takes ~0.3s for the server to bind and ~0.4s for the client to lookup. If DNS is not available, it takes ~40s for the server to bind and ~60s for the client to lookup! The times for lookup do not change if I use "127.0.0.1" instead of "localhost".
I have localhost defined in my /etc/hosts file and my /etc/nsswitch.conf file specifies that host lookups should use files before nameservers. By commenting out the localhost value in the /etc/hosts file, I have determined that eventually the value in /etc/hosts is used if needed (the server bind fails if DNS is not available and localhost is commented out).
If the network goes down, someone messes up the /etc/resolv.conf file, or our nameservers go down, RMI binds and lookups for something as easy to resolve as localhost takes way too long.
So my question boils down to: Is there any way I can bind and lookup RMI servers without using DNS or by using DNS after /etc/hosts lookup fails?

I turned on logging. You can see here that when DNS is working everything runs fine.
Nov 19, 2007 5:14:12 PM sun.rmi.transport.tcp.TCPTransport$ConnectionHandler run0
FINER: RMI TCP Connection(10)-127.0.0.1: (port 1234) client using localhost:0
Nov 19, 2007 5:14:12 PM sun.rmi.transport.tcp.TCPTransport handleMessages
FINE: RMI TCP Connection(10)-127.0.0.1: (port 1234) op = 80
Nov 19, 2007 5:14:12 PM sun.rmi.transport.StreamRemoteCall getInputStream
FINER: RMI TCP Connection(10)-127.0.0.1: getting input stream
Nov 19, 2007 5:14:12 PM sun.rmi.transport.Transport serviceCall
FINER: RMI TCP Connection(10)-127.0.0.1: call dispatcher
Nov 19, 2007 5:14:12 PM sun.rmi.server.UnicastServerRef logCall
FINER: RMI TCP Connection(10)-127.0.0.1: [127.0.0.1: sun.rmi.registry.RegistryImpl[0:0:0, 0]: java.rmi.Remote lookup(java.lang.String)]
Nov 19, 2007 5:14:12 PM sun.rmi.transport.StreamRemoteCall getOutputStream
FINER: RMI TCP Connection(10)-127.0.0.1: getting output stream
Nov 19, 2007 5:14:12 PM sun.rmi.transport.tcp.TCPTransport$ConnectionHandler run0
FINE: RMI TCP Connection(11)-127.0.0.1: accepted socket from [127.0.0.1:37084]When DNS is not working, there is a 15 second timeout and 5 seconds to reconnect.
Nov 19, 2007 5:16:03 PM sun.rmi.transport.tcp.TCPTransport$ConnectionHandler run0
FINE: RMI TCP Connection(12)-127.0.0.1: accepted socket from [127.0.0.1:57328]
Nov 19, 2007 5:16:03 PM sun.rmi.transport.tcp.TCPTransport$ConnectionHandler run0
FINER: RMI TCP Connection(12)-127.0.0.1: (port 1234) suggesting 127.0.0.1:57328
Nov 19, 2007 5:16:03 PM sun.rmi.transport.tcp.TCPTransport$ConnectionHandler run0
FINER: RMI TCP Connection(12)-127.0.0.1: (port 1234) client using localhost:0
Nov 19, 2007 5:16:03 PM sun.rmi.transport.tcp.TCPTransport handleMessages
FINE: RMI TCP Connection(12)-127.0.0.1: (port 1234) op = 80
Nov 19, 2007 5:16:03 PM sun.rmi.transport.StreamRemoteCall getInputStream
FINER: RMI TCP Connection(12)-127.0.0.1: getting input stream
Nov 19, 2007 5:16:03 PM sun.rmi.transport.Transport serviceCall
FINER: RMI TCP Connection(12)-127.0.0.1: call dispatcher
Nov 19, 2007 5:16:03 PM sun.rmi.server.UnicastServerRef logCall
FINER: RMI TCP Connection(12)-127.0.0.1: [127.0.0.1: sun.rmi.registry.RegistryImpl[0:0:0, 0]: java.rmi.Remote lookup(java.lang.String)]
Nov 19, 2007 5:16:03 PM sun.rmi.transport.StreamRemoteCall getOutputStream
FINER: RMI TCP Connection(12)-127.0.0.1: getting output stream
Nov 19, 2007 5:16:18 PM sun.rmi.transport.tcp.TCPTransport handleMessages
FINE: RMI TCP Connection(12)-127.0.0.1: (port 1234) connection closed
Nov 19, 2007 5:16:18 PM sun.rmi.transport.tcp.TCPConnection close
FINE: RMI TCP Connection(12)-127.0.0.1: close connection
Nov 19, 2007 5:16:23 PM sun.rmi.transport.tcp.TCPTransport$ConnectionHandler run0
FINE: RMI TCP Connection(13)-127.0.0.1: accepted socket from [127.0.0.1:37087]I tried specifying different timeout values using different RMI properties. Nothing seems to affect it except setting sun.rmi.transport.tcp.readTimeout to a value less than 15 seconds (which is not practical).
Any ideas why getting the output stream would timeout?

[J2EE Deployment SPI:260003]Feature not available when in disconnected mode

hi am am having this error when trying to deploy my application in portal
[04:40:27 PM] #### Deployment incomplete. ####
[04:40:27 PM] [J2EE Deployment SPI:260003]Feature not available when in disconnected mode.
#### Cannot run application HR-Portal due to error deploying to IntegratedWebLogicServer.
[Application HR-Portal stopped and undeployed from Server Instance IntegratedWebLogicServer]
my log error
[04:29:53 PM] Wrote Archive Module to C:\JDeveloper\mywork\HR-Portal\PortalWebAssets\deploy\PortalWebAssets.jar
[04:40:08 PM] oracle.rc.asadapter.connection.ConnectionException: Cannot establish connection.
[04:40:08 PM]      at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10Jsr160Provider.getPresentation(Weblogic10Jsr160Provider.java:73)
[04:40:08 PM]      at oracle.rc.asadapter.connection.AppServerConnectionImpl$PM.getPresentation(AppServerConnectionImpl.java:171)
[04:40:08 PM]      at oracle.rc.asadapter.connection.AppServerConnectionImpl.getPresentation(AppServerConnectionImpl.java:66)
[04:40:08 PM]      at oracle.jdevimpl.deploy.jazn.JaznDataDeployerListener.uploadIdentities(JaznDataDeployerListener.java:234)
[04:40:08 PM]      at oracle.jdevimpl.deploy.jazn.JaznDataDeployerListener.uploadIdentities(JaznDataDeployerListener.java:217)
[04:40:08 PM]      at oracle.jdevimpl.deploy.jazn.JaznDataDeployerListener.willDeploy(JaznDataDeployerListener.java:97)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.ListenerSupport.fireWillDeploy(ListenerSupport.java:198)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:88)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:457)
[04:40:08 PM]      at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:217)
[04:40:08 PM]      at oracle.jdevimpl.deploy.common.ModulePackagerImpl.deployProfiles(ModulePackagerImpl.java:86)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.ModulePackager.deployProfiles(ModulePackager.java:63)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.ModulePackager.deployImpl(ModulePackager.java:52)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39)
[04:40:08 PM]      at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94)
[04:40:08 PM]      at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:457)
[04:40:08 PM]      at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:217)
[04:40:08 PM]      at oracle.jdevimpl.runner.adrs.AdrsStarter$7$1.run(AdrsStarter.java:1774)
[04:40:08 PM] Caused by: java.io.IOException
[04:40:08 PM]      at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:196)
[04:40:08 PM]      at weblogic.management.remote.common.ClientProviderBase.newJMXConnector(ClientProviderBase.java:84)
[04:40:08 PM]      at javax.management.remote.JMXConnectorFactory.newJMXConnector(JMXConnectorFactory.java:338)
[04:40:08 PM]      at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10Jsr160Provider.getPresentation(Weblogic10Jsr160Provider.java:67)
[04:40:08 PM]      ... 28 more
[04:40:08 PM] Caused by: javax.naming.NamingException [Root exception is java.rmi.UnexpectedException: Marshalling: ; nested exception is:
[04:40:08 PM]      java.rmi.ConnectException: Could not establish a connection with -3508319463259142590S:127.0.0.1:[7101,7101,-1,-1,-1,-1,-1]:DefaultDomain:DefaultServer, java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination; nested exception is:
[04:40:08 PM]      java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination]
[04:40:08 PM]      at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:86)
[04:40:08 PM]      at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:32)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:685)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
[04:40:08 PM]      at weblogic.jndi.Environment.getContext(Environment.java:315)
[04:40:08 PM]      at weblogic.jndi.Environment.getContext(Environment.java:285)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
[04:40:08 PM]      at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
[04:40:08 PM]      at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
[04:40:08 PM]      at javax.naming.InitialContext.init(InitialContext.java:223)
[04:40:08 PM]      at javax.naming.InitialContext.<init>(InitialContext.java:197)
[04:40:08 PM]      at weblogic.management.remote.common.ClientProviderBase.makeConnection(ClientProviderBase.java:178)
[04:40:08 PM]      ... 31 more
[04:40:08 PM] Caused by: java.rmi.UnexpectedException: Marshalling: ; nested exception is:
[04:40:08 PM]      java.rmi.ConnectException: Could not establish a connection with -3508319463259142590S:127.0.0.1:[7101,7101,-1,-1,-1,-1,-1]:DefaultDomain:DefaultServer, java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination; nested exception is:
[04:40:08 PM]      java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination
[04:40:08 PM]      at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:57)
[04:40:08 PM]      at weblogic.security.acl.internal.RemoteAuthenticate.authenticate(RemoteAuthenticate.java:90)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.authenticateRemotely(WLInitialContextFactoryDelegate.java:747)
[04:40:08 PM]      at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:679)
[04:40:08 PM]      ... 41 more
[04:40:08 PM] Caused by: java.rmi.ConnectException: Could not establish a connection with -3508319463259142590S:127.0.0.1:[7101,7101,-1,-1,-1,-1,-1]:DefaultDomain:DefaultServer, java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination; nested exception is:
[04:40:08 PM]      java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:352)
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.getRequestStreamForDefaultUser(RJVMImpl.java:689)
[04:40:08 PM]      at weblogic.common.internal.BootServicesStub.authenticate(BootServicesStub.java:50)
[04:40:08 PM]      ... 44 more
[04:40:08 PM] Caused by: java.io.IOException: Destination unreachable; nested exception is:
[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.ensureConnectionEstablished(RJVMImpl.java:334)
[04:40:08 PM]      at weblogic.rjvm.RJVMImpl.getOutputStream(RJVMImpl.java:350)
[04:40:08 PM]      ... 46 more

Caused by: java.io.IOException: Destination unreachable; nested exception is:
+[04:40:08 PM]      java.net.ConnectException: Connection refused: connect; No available router to destination+
Is the WebLogic server running?

Sundance Channel-Advertised as available when it is not

Similar Messages

Maybe you are looking for