SunMC agent core dump but has a limit of zero and wont actually core dump
Greetings,
Before I put a call in with Sun, I thought I would find if anyone else has a similiar problem. I have SunMC 3.5.1 running on a number of platforms and generally it is quite stable. I do have a number of SunFire 1280's (Netra T-12 to SunMC) each with 3 system boards with 96 GB of RAM. These systems are worked pretty hard and about every day or so, each agent on each system crashes. The problem is that there is a limit of zero for the agent core dump and it wont produce a core dump. Other processes dump with no problems. I gather they may be some limit in one of the SunMC config files but I don't know where to look. Without a core dump, it makes life hard to work out what causes it. I am only running the basic module monitoring so nothing else is loaded. If the basic module wont stay up, then why spend money to but in advanced monitoring????
Any info would be appreciated. I have worked with the fabulous Sun team regarding SunMC and I find months waiting for an answer somewhat frustrating.
Regards
Stephen
Hi Ian,
Thanks for the info. I will have a look at the patches. I noticed 3.5.1b has been released but as per usual, Sun does not really put much effort into saying what is good about it and why we should make the effort for upgrading. I could not wait to move from version 3 to 3.5 as it was so hard to manage patchwise.
One other thing that annoys me no end is the SunRay integration (/opt/SUNWut/sbin/utsunmc) alarms that appear. Once or twice, when I try to acknowledge the alarm, it just hangs. The event log says that I am trying to acknowledge an event that does not exist.
But then again, it has to be good because it does not cost anything other than time and the millions of dollars we spend on Sun equipment so we can use SunMC. That much money is better spend on hardware then on Tivoli right?? I think I can get a base model 25k for less than implementing Tivoli.
Regards
Stephen
Similar Messages
-
I'm transfering info from my old pc to my new macbook pro, using Windows Migration Assistant. All was fine but has now lost connection (wifi) and won't reconnect. Mac is showing transfer window and I cant escape, I'm new to mac
You'll need to erase the drive by booting up holding command-option-r keys into your Recovery Volume.
Use Disk Utility to erase the disk and then Internet Recovery. That will take a while.
http://support.apple.com/kb/HT4718 -
I.m trying to download Mountain Lion but has only downloaded 79 meg and seems to be stuck any ideas
I.m trying to download Mountain Lion but has only downloaded 79 meg and seems to be stuck any ideas
Do you get a particular error message? What exactly happens.
-
i have an upgrade in 2 weeks but my phone just turned off and wont turn back on, can i get an early upgrade?
Hello hazelrose,
What an unfortunate situation! I'm sorry to hear that your current phone has stopped working. Let's see if we can find an option for you. What make & model phone do you have? Do you happen to have the extended warranty or insurance on your device?
Thank you,
MichelleH_VZW
Follow us on Twitter @VZWSupport -
still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs? bystephenftlaud
Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2. -
still running adobe cs2 on leopard. but now get unexpected quit msg. and wont launch. any chance that when i installed then uninstalled GENIEO yesterday something went wrong? how to fix? can i reinstall cs2 from original discs?
Hi,
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
Open Console in Applications>Utilities & see if there are any clues or repeating messages when trying to open CS2. -
i went to update my ipad to the iOS7, but then it went into recovery and wont restore, can someone please help me figure out how to restore it?
Follow step 1 to step 3 very closely.
http://support.apple.com/kb/HT1808 -
A day ago, my phone was freaking out, saying all these apps had stopped working, so I turned off and immediately after turning it off the dual core screen with the red M came up and wont turn back on…
http://www.verizonwireless.com/support/knowledge-base-26502/
Above if battery pull/soft reset doesn't help. If it's boot looped may need new equipment -
I have itunes on my windows desktop song that i have pourchasred songs online i am trying to move the songs to me andorid phone thay all come over but some of them are protected and wont play why is that
They will not play because they are protected.
You likely bought them before itunes + (drm free music). -
My ipod has a blank white screen and wont change no matter what i press or try.. what should i do?
my ipod has a blank white screen and wont change no matter what i press or try.. what do i need to do?
Try here:
iOS: Not responding or does not turn on
If you can't turn it off, let the battery fully drain. After charging for at least an hour try again.
If still problem that indicates a hardware problem an an appointment at the Genius Bar of an Apple store. -
My sons ipod locked up and now has a solid white screen and wont respond to anything
My sons ipod was working fine then the screen locked up wouldn't allow any use tried to turn it off now it has a solid white screen and wont respond to anything. Any ideas what i can do
Let the battery drain.
-
i recently plugged my iphone4 into my laptop to sync, when i plugged it in, itunes told me that i needed to update my software, so i clicked up date and walked awayfrom my computer leaving it to do the rest, but by the time i came back to my laptop 2-3 hours later i had realized that it has run out of charge and because of it my phone had gone into retoration mode- and the only way to fix it was to press restore. what do i do? do i click restore or will that take my phone back to factory settings as i have a tonne of photos and videos etc that i have not backed up yet?
what should i do anny coments or ideas please let me know!The first step in the upgrade process is a backup.
Did iTunes not create a new backup when you first connected it?
You really should be syncing your device and copying pictures off of it on a regular basis.
Starting an upgrade without first syncing and copying the pictures off is not a bright idea.
At this point, you only option is to restore.
Also, in the future, ensure your laptop is plugged into external power before starting upgrades. -
Music has red dots on iphone and wont play
Some music has red dots and wont play on iphone but appears on ipad and plays. Also cant update pc with music purchased on ipad that has been backed up on icloud.
I'm experiencing the same issues. Some songs will play andsome it just skips through and I can't make it stop scrolling up to the point where it will take me back to the main screen. depending how many times I do it or when I do it, some songs that didn't play on the initial try might play then, but not my whole playlist. All the songs play on my Ipad 3 and Ipod and they used to play on my Iphone 4 with iOS 6.
-
My ipod 5 has a broken power button And wont turn back on Help!
My ipod 5 has a broke poer button and was dead. I tried plugging it in to my computer and it charged normally now it wont turn back on and the computer says that its 100% charged how can i turn it bacl on without the power button? HElP!
Try:
- iOS: Not responding or does not turn on
When it says place the iPod in recovery mode
Place the iPod in recovery mode using one of these programs:
For PC
RecBoot: Easy Way to Put iPhone into Recovery Mode
or
http://joshuabailey1997.wordpress.com/2010/09/02/recboot-v1-3/
If necessary:
Download QTMLClient.dll & iTunesMobileDevice.dll for RecBoot
and
RecBoot tip
RecBoot may have problems on 64X windows, then try:
Tenorshare ReiBoot – Enter & Exit iPhone, iPad, iPod Recovery Mode with a Single Click
For MAC or PC
The Firmware Umbrella - TinyUmbrella
Installs blootware on PC too
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
I upgrated to the new itunes but then my itunes stoped working and wont open! HELP!!!!!!!!!!
I was upgrading to the new itunes, and it wouldnt open my itunes anymore! i double clicked and it still wouldnt open. this has been happening since saturday, and i realy need help!
Hello there, tmiller25.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.
Maybe you are looking for
-
Thunderbird won't print, even though Firefox will. Print preview works fine. Job queued, but seems to think printer is offline? Port is not listed when look at print job. (USB connection) Wasn't getting an error message... job just never printed or l
-
ERROR in Document Services Configuration through visual administrator
Hi Experts, I am using NETWEAVER 7.0 , I am getting error when i am trying to do 'Document Services Configuration' and 'Document Services License Service' through visual administrator message is "[permissions_collection_operator]: [per
-
Dear all, I'm facing a strange problem. This morning my WD worked well. I changed my specific table used in the WD (added new fields). My context is on this table. I update all my views with this context. I have 2 methods which used the specific tabl
-
Hi everyone, Starting a couple of weeks ago, certain web pages haven't been loading on Safari. Specifically, links from Google search results lead to a blank page (Google itself loads fine). YouTube tends not to load, but does at times, and seems to
-
To know the logic of MC 46 & MC 50
Hi friends, Good morning. her in our company client is asking to know the logic behind the [MC 46 & MC 50 and what are the movement types and what are the function modules working behind the transaction. pls give the stuff that would be very helpfu