SunMC Console on Windows XP not connecting

Hello,
I have just installed SunMC Center on my PC and attempted to login into the SunMC Server but get an error of communication could not be established, the server version may be incompatible.
I am able to connect using another PC, so my SMC server is up and the processes are up and fine. The working PC is on the same segment as my new PC, so I dont know what could be the issue with this PC thats not working.
Has anyone ran into this before? If so, what is not configured?
TIA
LR

Hi,
I had this problem-it is not a firewall issue (I had the problem with
both the firewall on my PC and the server down) but seems
to be a weird software conflict.I posted a message on this some
time ago (displayed below)..
Glad to see somebody else is also having this problem and it is not
just me.Anybody have the console on Windows XP working?
So far all I have found out is that port 23 of the SMC server is being
accessed by the SMC console on the PC (which is not working) but
on the laptop install of the SMC console it is not (this information is from
firewall logs).
Both the SMC consoles on the Laptop and the PC are installed from
the same packages.Both have the same firewall settings,both report the same java version..
Needless to say if you get it working let us know how you did it.
Cheers,
Ian
====================================
I have been trying to get the Java based console
Working from my PC and have found the following
oddments. When I run it from my PC the console fails
with a message saying �Communication could not be
Established with the server. The server version may be
Incompatible� If I then get my laptop, which has the same
Operatating system, same firewall setup, same virus software,
Same java :-
java version "1.4.2_03"
Java(TM) 2 Runtime Environment, Standard Edition (build 1.4.2_03-b02)
Java HotSpot(TM) Client VM (build 1.4.2_03-b02, mixed mode),and the same smc software ,
remove my PC from the network and plug in my laptop in which has the
same IP address as my PC,the console software works! Does anybody have any
idea what could be preventing the console on the PC working whilst the
laptop is fine? I have a few ideas in that the console software installed on some
other pcs does not work as well so there appears to be something in common
Installed on the PC�s (but not on the laptop) which is somehow stopping
the console from working. Now ,my pc is one inherited from the ghost of sys admins
Past but there is nothing as far as I can see which could cause some form of
Conflict-I am mainly focusing on Java based software..What I guess I will have to do
Is to uninstall as much software as I can and hope to eventually find the
Culprit..

Similar Messages

After restarting i get a message saying that Windows could not connect to the Group policy client service

The message i get is the following:
Windows could not connect to the Group policy client service. This problem prevents limited users from logging on to the system As and administrative user you can review the system event log for details why the service didn't respond.
This happens after restarting my laptop. It takes longer than usual and once it has booted up and loaded Windows Vista, I get the message on the right bottom corner as a window popping up.
I can still use my computer but a lot of my user account settings are not there.
I fixed it temporarily by rebooting using the option: boot up using my last successful configuration. Bu once I restart again the same thing happens.
How can i fix it?
Thanks.

Hi,
Please try the solutions on the following threads:
http://social.answers.microsoft.com/Forums/en/vistasecurity/thread/bbfe3246-0ceb-4899-bfba-7a98e642c009
http://social.technet.microsoft.com/Forums/en/winserverGP/thread/5de9f483-ff69-4fac-ac3f-601a62cc78d1
If the problem continues, please let us know if the computer is in a domain environment.
Regards,
Bruce

ITunes 10.5 for Windows 7 not connecting to iTunes store.

I updated to iTunes 10.5 today hoping that Apple fixed the connection problems which came with previous versions of iTunes for Windows. Unfortunately I was wrong. After installing 10.5, I cannot connect to the iTunes store...again. The progress bar at the top locks (along with the message "Accessing iTunes Store") and after 30 seconds all I get is a blank page. This is exactly what has happed in the last couple of versions of iTunes for Windows. I tried some of the 'netsh' fixes seen on other posts and this did not solve the issue. I also tried unistalling the specific AppleApplicationSupport software (in this case 2.1.5) and re-installing the 1.5.2 version (which fixed the connection problems on the previous version of iTunes) as seen on other posts but doing this will not work either. Any suggestions out there?

since other people aren't having this same issue you need to try troubleshooting your own machine and network connections to fix this, it's most likely not due to apple software.
Reconfigure any security software to allow Apple's servers to pass.
Useful information for configuring your security software:
IMPORTANT: iTunes must be allowed to contact Apple using the following ports and servers:
          ▪          port 80
          ▪          port 443
          ▪          phobos.apple.com, deimos3.apple.com, albert.apple.com, gs.apple.com, itunes.apple.com, ax.itunes.apple.com, ax.init.itunes.apple.com, ax.phobos.apple.com.edgesuite.net
iTunes uses well known ports and these ports may need to be opened for iTunes: 80, 443, 3689, 5297, 5298, 5353, 8000-8999, and 42000-42999.
iTunes also contacts VeriSign servers during an iPhone restore and activation:
          ▪          evintl-ocsp.verisign.com
          ▪          evsecure-ocsp.verisign.com
For more information see Update and restore alert messages on iPhone and iPod touch
Temporarily disable or uninstall your security software
If the current available version of your security software is incompatible with iTunes, you can disable the security software and test if it is the source of the issue. It might also be necessary to temporarily uninstall security software after making sure you can reinstall it and note any required licenses. A temporary deinstallation might be required because parts of some security software remain active in the background though they appear to be deactivated.
To reduce any security risks that security software is designed to prevent, consider making sure all files needed to reinstall it are available and disconnect network connections before uninstalling security software. Should this not be possible, such as if a download without active security software is required, that required step should be the only process completed without security software. For assistance in checking your configuration, disabling, or uninstalling your security software, please contact the manufacturer.
Once disabled or uninstalled, perform only the steps required to verify your issue has been resolved. Complete whatever update, restore, syncing, back up, activation, or other task you were troubleshooting. Once that task is complete, install and configure compatible security software to ensure your PC is protected.
If it isn't a program or software on the computer contact your Internet Service Provider and/or Router Company to configure or disable the firewall in the router settings.
To isolate the issue to this you can also try disconnecting the router and plugging your computer directly in to the modem but this does not help for troubleshooting time-out issues directly on any apple mobile devices only if you are syncing or going through iTunes on the computer.

Windows does not connect to Airport Express with WPA-Enterprise

Hey,
we are using some AirPort-Express stations at our office to provide a wireless network to our staff.
The APs use WPA/WPA2-Enterprise (linked to a RADIUS-Server) to check the users authority.
On Macs and iOS devices the connection to AP works fine but if we try to connect a Windows client, Windows shows up the login-screen, checks the password (if you try a wrong password it shows the login-screen again) but then it says that no connection is possible. We also tried it on another laptop (both using Windows 7 Professional), but it still does not work.
Can anybody help us?
Thanks!

This issue is often caused by Windows firewall, and sometimes caused by wireless interfernece. Try disabling the firewall or other anti-virus software. You can also directly connect you AE to your computer via ethernet to access the configuration.
If all else fails, you have hard reset the AE device and reconfigure.

Outlook clients on Windows XP not connecting to Exchange 2013

Previously outlook on XP machines were working fine with a SAN certificate having the mail.company.com as common name. Since we're moving to Exchange Hybrid we reissued the certificate and made company.com as the common name after that change all Outlook
on XP machines are not able to connect to the Exchange 2013. It is always asking for password. Outlook clients on windows 7 and 8 have no problem.
I wanted to run the below commands but I'm worried that it may break the connections of the Windows 7 and 8 machines:
Set-OutlookProvider
EXCH -CertPrincipalName msstd:mail.XXX.com
Set-OutlookProvider
EXPR -CertPrincipalName msstd:mail.XXX.com
Is it safe to run the commands or I should just reissue again the certificate and make the mail.company.com as the common name? Will there be any issues with Exchange 2013 hybrid if I do this?

I just reissued the certificate and all Outlook on windows xp are working now.

Windows does not connect to wireless network on startup! Please help!.

Hello. A few days ago i watched a tutorial on youtube on how to remove the red "x" problem over my internet icon, by deleting a file called "Config" in "Network" by opening"Regedit". I know see that I never should
have done that. I did that, and after that every time when I start up my computer it will not automatically connect to my wireless network as it did before i deleted that "Config" file.
Anoyone out there that know how I can fix this?. Thanks.

Hi,
Before we edit the registry, have we performed a backup of the registry files? Do we have any backup available before the changes? If yes, please take use of the backups.
Besides, could you please have a share for which tutorial you have followed? Or please share with the full registry path?
Have you tried to reconfigure the wireless network settings with your laptop?
For reference of wireless issues in Windows 7:
Wired and wireless network problems
Best regards
Michael Shao
TechNet Community Support

Windows would not connect with Airport ext

Hey!
I had to reset my Airport for my OSX. When I switch to windows on my IMAC, it won't connect. It use to before I reset. I can see it on the connexions available, but I get a message it can't find it.
Any help please?
Thanks!

I went into Network configuration and shows Airport ID that can not be changed (not shure whether it refers to the notebook hardware ID) On the ethernet Client ID is blank.
I was able to make connection once or twice before but not recently. Apparently it is a common problem with Mac Notebooks both G4 and Intel(I talked to other users that had a Mac) while PCs do not have the problem.
Other users were able to eventually connect by rebooting the computer.
Not sure if the problem became definite when I accessed wireless via Windows.
Tried to contact Apple Support on the phone but was told they do not provide support outside the US.
Hope someone can help since I really do not want to use Windows to access the Internet.
Do not know if it is a 802.11a, how can I tell?

Windows 7 not connecting to Itunes

I was able to connect to I-tune store at one point, but for some reason cannot now. The diagnostic indicates a secure link to store is the issue. Firewall and McAfee is showing full access. Using windows 7.

Many thanks.
With those symptoms, I'd try the following document:
Apple software on Windows: May see performance issues and blank iTunes Store
(If there's a SpeedBit LSP showing up in Autoruns, it's usually best to just uninstall your SpeedBit Video Accelerator.)

DAC Client in windows is not connected to DAC server in Linux

Hi,
I am using DAC 11g and server is in linux and client in windows.The status icon is still red
1)we are unable to connect the client to the server in linux.
2) we have checked that the DAC server in linux is up by running the command ps -ef | grep "com.siebel.etl.net.QServer".
3)even we have checked the connectivity with telnet and even the port 3141 is also opened
4) we have followed all the step suggested in previous thread
Anybody help me.
Edited by: 975976 on Apr 26, 2013 2:24 AM
Edited by: 975976 on Apr 26, 2013 2:24 AM

My DAc server is running fine.
In DAC server setup i entered the details.Also DAC DB is running fine.
Any other solution please.
Also when i am trying to run ./standaloneServerSetupPrompt.sh i am getting following error:
Exception in thread "main" java.lang.UnsatisfiedLinkError: /home/oracle/Java/jdk1.7.0_21/jre/lib/i386/xawt/libmawt.so: libXrender.so.1: cannot open shared object file: No such file or directory
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1825)
at java.lang.Runtime.load0(Runtime.java:792)
at java.lang.System.load(System.java:1059)
at java.lang.ClassLoader$NativeLibrary.load(Native Method)
at java.lang.ClassLoader.loadLibrary1(ClassLoader.java:1939)
at java.lang.ClassLoader.loadLibrary0(ClassLoader.java:1864)
at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1846)
at java.lang.Runtime.loadLibrary0(Runtime.java:845)
Can you tell me why this error is coming.
Edited by: 975976 on Apr 26, 2013 4:29 AM
Edited by: 975976 on Apr 26, 2013 4:48 AM

Windows 8 not connecting to IPod touch

I have 4G IPod Touch I bought several years ago. My PC died so now I have new Windows 8. I was able to get my songs and apps on ITunes, but when I hit sync it’s not recognizing the IPod. I can’t get my songs back on my Touch.

See:
iOS: Device not recognized in iTunes for Windows
I would start with
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
Run this to help if it identifies the cause
iTunes for Windows: Device Sync Tests
Have you tried on another computer to help determine if you have a computer or iPod problem?

Windows will not connect to my mouse

I can't get windows in Bootcamp to connect to my Microsoft Bluetooth Mouse. It is connected in OS-X, but when I try to connect it in Windows, it sees it, but never connects.
I downloaded all the drivers I could find for the mouse in windows to no success.
Thanks

Please see http://www.tonymacx86.com/general-help/72201-dual-booting-windows-7-mac-mountain -lion-both-magic-trackpad-magic-mouse-bluetooth-setup.html
The simpler solution to test is to unpaid the mouse from OSX side, pair it to Windows first, and then pair it to the OSX side.

Windows 8 not connecting.

Asking for network security key? What is that?

Network Security Key = WiFi Password
Your WiFi password should be recorded on a label on the back of your Jetpack. Some Jetpacks have an interface on them that allows you to display the WiFi Password on the device E-Ink screen too. Type that password in as your Security key when connecting the Win8 device to the Jetpack. Once you enter the WiFi password the Win8 device should remember it by default and allow you to auto connect in the future.
Let us know if you have any other error messages or issues connecting to Win8.

Linksys WRT54GL does not connect by cable at Windows 7

Hi. I have used this router connected to one router acting as a cable modem at a cable connection for years and now running with windows 7, after 24 hours, windows can not connect. It has not problems connecting by wireless. It is curious because it has not any problem connecting at windows xp.
Anybody have seen this?

In the command prompt post the results of the below command:
ipconfig /all
I'm guessing your adapter isn't getting IP information. Good troublehooting info will be in the ipconfig output.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Could not install DPM agent on Secondry site DPM could not connect to the Service control manager : ID 33221

Hi,
We have two DPM 2012 R2 server installed at Primary and Secondary site Windows 2012 R2 installed.
We need to Protected Primary DPM from Secondary DPM.
When install DPM agent got error from secondary DPM console.
“DPM could not connect to the Service Control Manager on these servers ID: 33221”
Checked till now :
Visual C++ redistributable installed.
Checked DNS A record and both server can ping each other,
Widows Firewall off on both servers.
Net stop mpssvc ( Windows firewall service)
sc \\Server1 query
àable
to see result
Thanks,

Hi
You mention checking the DNS A record, are these 2 servers not in the same domain? Can you ping -a computername?
Do you have any other AV software that have firewalls built in?
Hope this helps. Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

Network and Sharing Center: You are currently not connected to any networks!

This happened all of the sudden, I restarted the system and BOOM!
After noticing the icon with the Exclamation mark at the system tray, there was nothing wrong with communication but the reporting is really messed up!
I've uninstalled the NIC driver and reinstalled it, reviewed services permission and if they are running but still no lucky here...
It's Win 8.1 Pro x64, the computer is member of a domain and I'm surely online, otherwise I could not be writing this post! ;)
Any help would be greatly appreciated!

did you upgrade your Windows 8.1 from XP?
http://answers.microsoft.com/en-us/windows/forum/windows_8-networking/windows-8-not-connected-to-network-but-it-is-shows/873d7474-6149-43bc-a94b-a29ff75afaa7
Check OP reply:
A follow up for anyone reading this. My problem was apparently caused by upgrading from XP and usinging the keep files and settings option. Though there are very limited items brought over from an XP installation, something buried somewhere disabled the
network connections.
To fix this, Windows 8 has a new feature called reset. This basically does setup all over again if you choose the erase files option. You have to enter the product key again when you do this. It is a clean installation. I had to update the graphic
card drivers, add Media Center back in, install the HD Homerun Prime software, run the cable advisor, do TV setup and finally have it working as I had planned.
I suggest try same procedure (if you upgrade from XP to Windows 8.1), choose reset and reinstall back all the drivers

SunMC Console on Windows XP not connecting

Similar Messages

Maybe you are looking for