Sunone Server console connectivity problem

I am not able to connect directory server through console , getting following error message
Cannot logon because of an incorrect userID,
Incorrect password or Directory Problem
HttpException:
Response: HTTP/1.1 500 Server Error
Status: 500
URL: http://10.0.2.4:52103/admin-serv/authenticate
but i am able to connect from other ldapbrowsers ...and directroy server is running what could be be problem with console...
Any advise will be appreciated.
Thank you.

try this
http://swforum.sun.com/jive/thread.jspa?threadID=48144&tstart=0
see reply #5

Similar Messages

SCCM console connection problem to SMS provider

I have installed sccm in the bolw deisgn for the lack of Cluster test environment. It is just to test SCCM HA.
SQL 2008 and SCCM 2012 Site server in two separate physical box(win 2008) and installed additional sms provider to another windows 2003 box. I am trying to connect the console installed on SQL box to new SMS provider(win 2003 box). It does
not connect. What could be the reason? Is it possible by technology at all or not? If it is, how could it be possible?
Thanks
Rafiqul

Yes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Console Connection problem

I am trying to connect from my Windows 7 machine through IE 8. I can create machines do almost everything I need to except connect to the console.
The error I get is below.
I am able to VNC into the machine that I have VM Manager installed on which is centos 5.0 and connect to the console just fine.
load: class VncViewer.class not found.
java.lang.ClassNotFoundException: VncViewer.class
     at sun.plugin2.applet.Applet2ClassLoader.findClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at java.lang.ClassLoader.loadClass(Unknown Source)
     at sun.plugin2.applet.Plugin2ClassLoader.loadCode(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager.createApplet(Unknown Source)
     at sun.plugin2.applet.Plugin2Manager$AppletExecutionRunnable.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
Caused by: java.io.IOException: open HTTP connection failed:https://oraclemgr:4443/OVS/faces/app/VncViewer/class.class
     at sun.plugin2.applet.Applet2ClassLoader.getBytes(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader.access$000(Unknown Source)
     at sun.plugin2.applet.Applet2ClassLoader$1.run(Unknown Source)
     at java.security.AccessController.doPrivileged(Native Method)
     ... 7 more
Exception: java.lang.ClassNotFoundException: VncViewer.class

Firefox won't help you I'm afraid - the problem is actually at the server end not the client.
What you actually need to do is install TightVNC on your Oracle VM Manager node.
You can get it from http://oss.oracle.com/oraclevm/manager/RPMS/
You will then have to close down your browser on your Windows 7 machine and reconnect to the Oracle VM Manager system and try the console again. It will moan briefly about the certificate but accept it and carry on - you should not get the Java error again.
I found this a great help because the cursor control on my Oracle VM Manager is nearly imposible because I am 5000 miles away from it and over an ILO connection, but with TightVNC on my laptop I can get the same GUI up with mouse control that is as good as local!
Let me know if this fixes yours too!

Sun iplanet console connect problems

Hello,
We've changed the ldap port from 389 to 390, we did this via the iplanet console.
Restarted ldap, everything OK.
Now we want to change it back to 389, but we can not connect with the iplanet console.
It looks like that the console besides the 27400 also connects to port 389 which is not running.
Any help would be great
Regards,
Dirk

hello,
problem solved: read the following
If you want to change the port number of the Configuration Directory Server used by your Administration Server, you can use either the following GUI or CLI instructions (391575)(391363):
GUI Instructions:
Open the Directory Console and select the Configuration tab.
Change the LDAP port to a new value
Click OK. The success dialog tells you to restart the server for the changes to take effect. Do not quit Console.
Restart Directory Server from the command line.
Next, change the Administration Server LDAP port with the following steps:
In Console, select the administration server that you want to change, and then click Open.
Click the Configuration tab, click Settings, and then change the value for Port.
Click OK. The success dialog tells you to restart the server for the changes to take effect.
Quit Console.
Restart Administration Server
To change the Administration Server LDAP port from the command, use the following instructions:
Command Line Instructions:
Go to the Administration Server's server root and make the following changes:
Open /admin-serv/config/adm.conf and change LDAP port to the new Configuration Directory Server port number.
Open /shared/config/dbswitch.conf and change the directory default URL to reflect the new port number.
Restart Administration Server. When you launch Console, it will point to the new Configuration Directory Server port.
Note: The above steps are performed for each individual Administration Server in the topology that will use a new Configuration Directory Server.
Regards,
Dirk

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

MS SQL Server 2000 connectivity problems

Hello everyone,
I'm having problems connecting my application to MS SQL Server 2000. I am making a desktop application that is going to read and update a database I have created in MS SQL Server 2000. The problem is I cannot connect to the database from the application. Here are the details:
I have only created a GUI for one table so far. I have created one other class that is used for connecting to the database.
The GUI class is called Products.java and I have created it in Netbeans. The other class is called ConnectClass.java. In the constructor of the Products.java (GUI class), I instantiate an object of ConnectClass. That object in turn tries to establish a connection to the database. Here is the code of the constructor of the Products.java class (GUI class).
public class Products extends javax.swing.JFrame {
private ConnectClass connect1; // declaring the reference variable for ConnectClass
/** Creates new form Products */
public Products() {
initComponents();
connect1 = new ConnectClass(); // instantiating the ConnectClass
The code of ConnectClass.java is as follows:
import java.sql.*;
public class ConnectClass {
Connection connection;
Statement statement;
public ConnectClass()
try
Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver");
connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:1433;DatabaseName=assignment2;User=root;Password=sa");
statement = connection.createStatement();
catch(SQLException sqle)
System.err.println("Error creating connection");
catch(ClassNotFoundException cnfe)
System.err.println(cnfe.toString());
When I run the application I expect that the database should be connected at least. However I get the following message in Netbeans output window:
run:
java.lang.ClassNotFoundException: com.microsoft.jdbc.sqlserver.SQLServerDriver
BUILD SUCCESSFUL (total time: 6 seconds)
I am using Windows XP Home Edition SP3
The JDBC driver I am using is: Microsoft® SQL Server® 2000 Driver for JDBC™ Service Pack 3
The name of the database I have created in MS SQL Server 2000 is: assignment2
I have given the following settings in the CLASSPATH environment variable: .;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msbase.jar;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\msutil.jar;c:\program files\Microsoft SQL Server 2000 Driver for JDBC\lib\mssqlserver.jar
I don't know what is wrong. Any help would be GREATLY appreciated. If you want to know something more please ask me.
Regards

Ace1111111 wrote:
Thanks for the answers. I put the jar file in the jdk/jre/lib/ext folderWhich is exactly what you should not do. That folder is for language extensions, which a Driver is not. Why does everybody find it so hard to take the time to learn the language basics?
and the driver was finally detected but then the program would not connect to the database.Did you configure the server properly. Per default it is not configured to accept network connections.
I tried jtds driver too. I was so frustrated that I installed MySQL instead. Put the jar file in jre/lib/ext folder and then gave the URL and to my relief the database connected. Maybe there are some settings that need to be configured in MS SQL before it can connect. But I could not get it to connect :(The manual would contain that info, btw.

MS SQL Server 2005 connection problem?

Hi all,
I am a beginner in these things, so be patient please. I have established database connection with my MS SQL 2005 server with a 3rd party JDBC driver. Testing databasae connection was successfull, but there are no tables from my created database in JDeveloper. Instead of my tables there are some for me unknown tables. Can anybody help me with this problem? just ask for further information.
Here is port, that I have used to make connection. Actually I don't know, if this port is good. I get this information from my SQL server configuration manager.
http://b.imagehost.org/0592/Clipboard01.jpg
-->
http://b.imagehost.org/0592/Clipboard04.jpg
This is my simple testing database that was created in MS SQL:
http://b.imagehost.org/0592/Clipboard03-3.jpg
as you can see on the picture, my database called "skusobna" includes only one table called "osoba".
After making connection to MS SQL Server there are only these uknown tables.I don't know from where are these tables inserted, but my database with table "osoba" isn't included.
http://b.imagehost.org/0592/Clipboard02-2.jpg
All I want to do is to connect my database to JDeveloper that I can see my tables created in MS SQL.
Thanks...

Here is port, that I have used to make connection. Actually I don't know, if this port is good. I get this information from my SQL server configuration manager.
http://b.imagehost.org/0592/Clipboard01.jpg
The port is correct.
-->
http://b.imagehost.org/0592/Clipboard04.jpg
The connection url is correct.
This is my simple testing database that was created in MS SQL:
http://b.imagehost.org/0592/Clipboard03-3.jpg
as you can see on the picture, my database called "skusobna" includes only one table called "osoba".
The database is correct.
After making connection to MS SQL Server there are only these uknown tables.I don't know from where are these tables inserted, but my database with table "osoba" isn't included.
http://b.imagehost.org/0592/Clipboard02-2.jpg
Click on the dbo node for the osoba table.

Root Cause Analysis (OS and DB - OS Command Console) Connection problem!

Dear Community,
i've got a problem with the Root Cause Analysis OS Command console!
Currently I try to read the System MemStat info from the console, without success!
I've got the following errors:
Error1:
Error to parse the data returns by 'SAPOSCol', cause :com.sap.smd.plugin.remoteos.exception.SAPOSColDataParserException: Unknown Error during the parsing of saposcol output; nested exception is:
java.lang.NullPointerException
Error2:
'SAPOSCol' Service not availbale, detail :com.sap.smd.plugin.remoteos.exception.SAPOScolNotAvailable: SAPOSCol not available (detail output: )
The saposcol service is running, when I look on the server, I've got the correct status:
server:<sid>adm> saposcol -s
Collector Versions :
running : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux
dialog : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux, 2007/02/16
Shared Memory       : attached
Number of records   : 5758
Active Flag         : active (01)
Operating System    : Linux server 2.6.5-7.283-smp #1 SMP Wed Nov 29
Collector PID       : 9536 (00002540)
Collector           : running
Start time coll.    : Wed Apr 23 15:00:58 2008
Current Time        : Wed Apr 23 15:12:08 2008
Last write access   : Wed Apr 23 15:12:04 2008
Last Read Access   : Wed Apr 23 15:12:03 2008
Collection Interval : 10 sec (next delay).
Collection Interval : 10 sec (last ).
Status              : free
Collect Details     : required
Refresh             : required
Header Extention Structure
Number of x-header      Records : 1
Number of Communication Records : 60
Number of free Com.     Records : 60
Resulting offset to 1.data rec. : 61
Trace level             : 2
Collector in IDLE - mode ? : NO
become idle after 300 sec without read access.
Length of Idle Interval : 60 sec
Length of norm.Interval : 10 sec
The strange thing is, sometimes it works, sometimes not!
Any Ideas?
System: Solution Manager 4.0 SP Stack 13
Thanks and regards
Sascha

>   running : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux
>   dialog : COLL 20.94 700 - v2.00, AMD/Intel x86_64 with Linux, 2007/02/16
I suggest you upgrade your saposcol on the Linux box, it's more than a year old and it's possible, that the SMD client needs a newer version that provides the data you're requesting.
Markus

ISA Server 2004 Connection Problem

Hi all,
I have a problem on my isa server ,
I need to Disable and Enable WAN card every day to get the internet connection , and I Still connected all the day , after get back to home and at the next day , I need to disable and Enable WAN to go online .
I need your help to solve this issue please .
thanks in advance

Hi,
Firstly, would you mind to post the result of running “ipconfig/all” at the command prompt?
Please make sure that your network driver is compatible and maybe you can update or uninstall your network driver to see if the issue persists.
Best regards,
Susie

SQL Server 2000 connection problems

We installed SSL certificates on both the nodes of the sql
server cluster and enabled "Forced Protocol Encryption" on db
server using SQL Server Network Utility.
After enabling that we are getting the below message. we
would like to encrypt the data passing between SQL and CF servers.
we need help in this regard
Error Message:
Operation failed on the data source named "CData".
Reason of failure "java.sql.SQLException:
[Macromedia][SQLServer JDBC Driver]No more data available to read."
Environment details:
Database Server Info:
: SQL Server 2000 sp4 (Active/passive)
windows 2003 -sp1
CF :
ColdFusion MX Version 7,0,2,142559
Edition Enterprise
Operating System Windows 2003
OS Version 5.2
JVM Details
Java Version 1.4.2_11
Java Vendor Sun Microsystems Inc.
Java Vendor URL
http://java.sun.com/
Java Home E:\javaSDK\j2sdk1.4.2_11\jre
Java File Encoding Cp1252
Java Default Locale en_US

ColdFusion does not yet support encrypted datasource
connection, so this is I believe a reason why you are getting the
error message.

SAP B2B server - test connection problem

Hi Team,
We have business connector 4.6 sap BC server. We have created adapter connection in sapbc server to establish a connection to SAP ECC system but when we perform test connection in sapbc server it is throwing out error as" Name or password is incorrect (repeat logon)" though we mentioned the right password and logon credentials.
Created listener for sap adapter in BC server and maintained program id and other configuration details. Created TCP/IP RFC connection from SAP using register program id "SAPBC and it is working fine.
communication from SAP to BC is working fine however we could receive error when we tried to test the connection from BC to SAP ECC.
Below are the BC Error trace for reference.
**** ERROR file opened at 20140702 192722 India Standard , SAP-REL 620,0,72 RFC-VER 3 480692 MT-SL
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [5] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [6] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [7] : returns 3:RFC_SYS_EXCEPTION
T:162 ======> Name or password is incorrect (repeat logon)
T:162 <* RfcReceive [8] : returns 3:RFC_SYS_EXCEPTION
>TS> Wed Jul 02 19:55:59 2014
T:190 ======> Name or password is incorrect (repeat logon)
T:190 <* RfcReceive [9] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [10] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [11] : returns 3:RFC_SYS_EXCEPTION
T:190 ======> Password logon no longer possible - too many failed attempts
T:190 <* RfcReceive [12] : returns 3:RFC_SYS_EXCEPTION
Below are the system details:-
SAPBC – B2B web method integration server version 4.6 on windows NT system
SAP ECC Details - ECC 6.0, Oracle 10.2, HP Unix 11.31 (Unicode)
Please share if you have any clues on this.
Regards,
Ajay Asawa

Hi Deepak,
I have attache here the screenshot in first two part. Please check attachment
and also attach the error message
There is any change we have done recently in both system. B2B connected to our ECC production system
Regards,
Ajay Asawa

SQL server weird connection problem-Pls help

I m using SQL server 2005 express. My default logon mode setting is set to-SQL server authentication and I can logon to using SQL server management studio express always. I enabled TCP/IP from SQL server configuration manager. The sqljdbc.jar (JDBC driver) is set correctly in classpath and 1433 port is allowed in windows firewall. YET, I can�t connect to sql server using the following code-
import java.sql.*; public class testconn { Statement stmt; Connection con = null; String driver = "jdbc:sqlserver://"; String server = "localhost:1433;"; String db = "database=IDLC-Customer;"; String user = "userName=Tanvir;"; String pwd = "password=abcd;"; String connectName = driver + server + db + user + pwd; testconn() { try { Class.forName("com.microsoft.sqlserver.jdbc.SQLServerDriver"); con= DriverManager.getConnection(connectName); stmt=con.createStatement(); if(!con.isClosed()) System.out.println("Successfully connected to " + "SQL server using TCP/IP..."); } catch(Exception e) { System.err.println("Exception: " + e); } finally { try { if(con != null) con.close(); } catch(SQLException e) {} } } public static void main(String args[]) { testconn tc=new testconn(); } }
My host name is- Tanvir. So, in management studio express the server name is shown- TANVIR\SQLEXPRESS
When I run the code it says-The TCP/IP connection to the host has failed.
Java.net.connectException:Connection Refused: Connect
One more thing, though 1433 port is allowed in windows firewall, I can�t connect to that port using telnet (e.g. telnet <server_host> 1433).I even disabled firewall and tried but in vain. PLEASE help me brother.

masijade. wrote:
Then you, seemingly, have not configured your SQL server properly, or you have not "activated" that configuration.
(don't ask because I don't know how, or even if, you do it that way with SQL Server).
But, not being able to connect with telnet, means that nothing is listening on that port. What does the netstat command tell you?Brother,as u know that sql server use the default port 1433 even if i don't mention it.And I tried disabling my firewall and antivirus but yet I cant connect.I searched the ports using "Advanced port scanner" but the port 1433 is neither in its open ports list nor in closed port list. WHat can I do now.The port 1433 is by default used by sql server.So even if I dont mention it or set it, it should work.Isn't it? I m getting out of my mind, pls help .

JSTL - SQL Server Database Connectivity problem

Hi All
I am trying to implement DB connection using JSTL sql tag using the following code :-
<c:set value="jdbc:sqlserver://localhost;databaseName=Studentreg;user=sa;password=pass" var="URL"/>
<sql:setDataSource driver="com.microsoft.sqlserver.jdbc.SQLServerDriver" url="${URL}" user="sa" password="pass" var="stc"/>
But I am getting the error :-
exception
javax.servlet.ServletException: javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver"
root cause
javax.servlet.jsp.JspException: Unable to get connection, DataSource invalid: "java.sql.SQLException: No suitable driver"
But when I am trying to implement the same using the jdbc-odbc driver It work fine. This is the code:-
<sql:setDataSource driver="sun.jdbc.odbc.JdbcOdbcDriver" url="jdbc:odbc:dsn_name" user="sa" password="pass" var="stc"/>
Please help me in this regards
Thanks in Advance
Sulfikkar

java.sql.SQLException: No suitable driverMeans that it can not find the JDBC driver in the classpath.
Make sure your Database driver is in your WEB-INF/lib directory, or [TOMCAT]/common/lib directory (or equivalent)
Cheers,
evnafets

Local Network Connection Problem with SQL Server 2008 R2

Hi,
I have CRM application which uses SQL server 2008. Weird thing is that I have no problems connecting from client machines to the server when using a particular router (via LAN) and when I upgrade the firmware of the same router (A common open source firmware
which is used by many also works perfect apart from mentioned problem) and restart the server, the connection cannot be established. I get Error 40.
When i downgrade the firmware and restart the server, the connection works again.
Please note that I am absolutely not touching any configuration of the server. Also the CRM software allows remote connections from public IPs which this feature works fine with both downgraded and upgraded firmwares.
As for my understanding, the routers do not block ports in LAN connections. So how can I diagnose the reason for this connection problem?

Hi Leony83,
Please also help to check Windows Event Log information regarding this issue, so that we can do further investigation. In additin, here is the general steps to troubleshoot SQL Server Error 40 issue. Please see:
SQL SERVER – Fix : Error : 40 – could not open a connection to SQL server – Fix Connection Problems of SQL Server:
http://blog.sqlauthority.com/2008/08/24/sql-server-fix-error-40-could-not-open-a-connection-to-sql-server-fix-connection-problems-of-sql-server/
Hope this helps.
Regards,
Elvis Long
TechNet Community Support

MSSQLServer jdbc connect problem on ODI 11G R2

I have a MS SQL Server jdbc connect problem on ODI 11G R2 / Windows server 2008 64 bits.
Tried, one by one, all versions of Microsoft drivers.
Sqljdbc4.jar copied to : %appdata%\odi\oracledi\userlib\
The Topology connect syntax is :
driver: com.microsoft.sqlserver.jdbc.SQLServerDriver
URL : jdbc:sqlserver://<host>:1433
=> All the topology tests end with time-outs.
Installed 10G ODI.
Works with 1.4 java and sqljdbc.jar version 2 jdbc driver.
Times out with version 3 and/or Sqljdbc4.jar + JAVA_HOME & ODI_JAVA_HOME set to 1.6 path.
also tried, with no success (time-outs) on either 10g or 11g :
com.inet.tds.TdsDriver
jdbc:inetdae7://<host>:1433?database=<DB>
same results for :
net.sourceforge.jtds.jdbc.Driver
jdbc:jtds:sqlserver://<host>:1433
Any suggestions for a fix?
Many thanks in advance.

Hello,
ODI (11g) Studio is certified on Windows 32 bit only, not on 64bit.
However you may still install it and configure ODI Studio to run with a 32 bit java.
Details pls see Master Note For ODI 11g Install Issues And Questions (Doc ID 1214428.1).
To connect to SQL Server:
# Check and make sure the authentication mode of your Microsoft SQL Server Server is set to "SQL Server and Windows" or "Mixed", otherwise Oracle Data Integrator (ODI) is unable to connect to the database.
# Before you create the Oracle Data Integrator (ODI) Dataserver in Topology Manager > Physical Architecture, stop all ODI processes, and place the JDBC Driver file in the ODI's userlib and "/drivers" folder.
For ODI Studio (Local No Agent)
%APPDATA%\odi\oracledi\userlib
%APPDATA% is the Windows Application Data directory for the user (usually C:\Documents and Settings\<user>\Application Data).
Standalone Agent
ODI_HOME\oracledi\agent\drivers
Note: If you decide to use the DataDirect driver that comes with ODI 11g install/ embedded in ODI 11g
weblogic.jdbc.sqlserver.SQLServerDriver
Then you don't need to worry about this step.
# Make sure that the database is the default database of the user account employed by ODI for connection, and that the password is correct.
# Verify (in your Microsoft SQL Server Server network configuration) that TCP/IP has been enabled on port 1433.
For more details see How To Set Up JDBC Driver Connections For The Microsoft SQL Server For ODI (Doc ID 423914.1)
If you try sqljdbc.jar, you need to configure ODI_JAVA_HOME to jdk1.5
sqljdbc4.jar, jdk1.6 (since ODI 11g requires jdk1.6, I'd suggest sqljdbc4.jar)
More see Compatibility Matrix For Java Machines And JDBC Drivers Used With ODI (Doc ID 807235.1)
Hope that helps other people who run into this,
Edited by: user742480 on Apr 4, 2011 12:06 PM

Sunone Server console connectivity problem

Similar Messages

Maybe you are looking for