SunOS 5.11, there are whether Recommended patches?

I downloaded and install solaris 10, relise 6/06, sparc.
uname show me "SunOS 5.11".
I tryed install 10_Recommended, but system says that incompatible release.
There are where Recommended patches for this kernel?

SunOS 5.11 is the kernel version for Solaris Express (aka Solaris.next) not Solaris 10. Can you please check again on what you downloaded and installed? Since this version is still under development, there are no patches for it. Instead, the content is refreshed regularly.
-- Alan

Similar Messages

Where are older Recommended Patch Clusters located?

My project is spec'd to use the June 2009 Recommended Patch Cluster release, but I can't find the previous patch cluster releases. Is there anywhere on the Sun site that I can find the older patch clusters?

I ended up calling out Sun support, and after about a week he got back with us and said that although usually such a patch is available on a DVD he recieves every month, the June 2009 DVD was pulled due to "quality issues". Thank you both for your support.

After enabling Oracle Deport Repair, What are the recommended patches to be applied for R12 instance.

Hi,
I'm working on Oracle Deport Repair, so are they any Recommended patches to be applied on the Instance to complete the Implementation successful.
Please let me know if they are any patches available.
Thank you.

Please see ..
Identifying Recommended Patches for E-Business Suite Environments
https://blogs.oracle.com/stevenChan/entry/recommended_patches_for_oracle_e
Identifying the Latest Family Packs for Oracle E-Business Suite
https://blogs.oracle.com/stevenChan/entry/latest_available_packs_for_oracle
Oracle Applications Current Patchset Comparison Utility - patchsets.sh [ID 139684.1]
Thanks,
Hussein

Applying recommended patch bundles to a Data Guard environment.

I've learned that there are 3 recommended patch bundles for 10.2.0.4 Data Guard, as follows:
7937113 - 10.2.0.4 Data Guard Logical Recommended Patch Bundle #1
7936993 - 10.2.0.4 Data Guard Physical Recommended Patch Bundle #1
7936793 - 10.2.0.4 Data Guard Broker Recommended Patch Bundle #1
My question is this...should I apply the logical and physical patch bundles to the primary database as well?
Thanks,
Michael Anderson
OCP - Bank of the West

That's what I suspected. Now, in my environment, I could never conceive of a situation where I would switch roles between the primary and the logical standby database, so I would only apply the DG physical patch bundle to the primary database but not the DG Logical patch bundle. Agree?

There are much dirty in my Macbook Pro screen

Hi there! I have used Macbook Pro for 4 months, and now there are much duty inside my Macbook Pro's Screen. Can I exchange another one for my screen, you know, there are much much screen, so that is not very comfortable for me now.
P.S: I really don't know how the duty can access inside to my MBP's screen? :-?

I have the same problem - there are these "dark patches" that sort of look like someone smudged the inside of the screen. I noticed this since I bought my computer, but I waited to bring it in because I thought it might go away or might be able to be cleaned. Also, I've been away at school so it hasn't been convenient.
In any case, I just brought it into a local Apple Retail Store to have it looked at, and they told me it is "damage" resulting from pressure applied to the back of the screen. In the end, they told me that because I waited as long as I did to have it looked at, my AppleCare Protection Plan, which doesn't expire until JUNE 2010 will NOT cover the $1249 repair that they estimated.
I am extremely careful not to pick up my laptop with one hand or in any way that applies hard pressure to the screen; I am surprised that the people I talked to wouldn't elect to send my laptop into repair. I am also very disappointed that my $250+ AppleCare Protection Plan is evidently useless.
Anyone else have any ideas or experience in similar matters or likewise?

I've just completed a vunerability scan (Kaspersky 2010 suite) and it recommends Idownload a patch from the vendor (SA42517= fault report). there are no updates so is Firefox safe to use?

I've just completed a vunerability scan (Kaspersky 2010 suite) and it recommends Idownload a patch from the vendor (SA42517= fault report). there are no updates so is Firefox safe to use?

You are using a relatively old version of Firefox (version 3.6), you should update to the latest version (3.6.13), there have been quite a few security fixes since the one you are using. You can get it from http://www.mozilla.com - you can download the setup file then run it to install it, this will replace your version with the latest.

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Is there a recommended limit on the number of custom sections and the cells per table so that there are no performance issues with the UI?

Thanks Kelly,
The answers would be the following:
1200 cells per custom section (NEW COUNT), and up to 30 custom sections per spec.
Assuming all will be populated, and this would apply to all final material specs in the system which could be ~25% of all material specs.
The cells will be numeric, free text, drop downs, and some calculated numeric.
Are we reaching the limits for UI performance?
Thanks

I am trying to find an app or software to burn iMovie slideshow to a dvd. I have a MacBook Pro with Mavericks. There are a lot of DVD Creator apps a the App store. Looking for a recommendation of what to use and tips.

I am trying to find an app or software to burn iMovie 11 slideshow to a dvd. I have a MacBook Pro with Mavericks. There are a lot of DVD Creator apps at the App store. Looking for a recommendation of what to use and tips. Thank you.

I've been using "Burn" for years and it has been the only DVD burning software I have ever used for the mac. I have never needed to look at other apps. Unless you want something that has more bells and whistles such as Roxio's "Toast" : http://www.roxio.com/enu/products/toast/pro/overview.html
There are thousands of quality free apps out there for the mac that are not part of the App Store. All you have to do is read reviews online, do a little search, the Apple forums are full of recommendations from experienced users that have been here for years...

HT4914 Can I use iTunes match if I am not sure whether there are any pirated songs in my library

Can I use iTunes match if I am not sure whether there are any pirated songs in my library

iTunes match should work for that. I am assuming your friend gave you some music from a flash drive, and yor not sure if he/sh pirided it or not, and this is understandible. this screen shot should help. I also sugest looking into google play, which is not as convienet as far as combining with iTunes, but is free I bleive.

OUI-10091:There are no patches that need to be applied from the patchset

Hi All,
when i try to apply 10.2.0.3 patch on 10.2.0.1 in linux x86 I am getting into this error.
OUI-10091:There are no patches that need to be applied from the patchset Oracle Db 10g R2 Patchset 10.2.0.3.0
The original ora inventory is lost and cannot be recovered.
So is there any way I can upgrade the database software.
Please advise.
thanks in Advance
-PK

You should first try to troubleshoot the missing inventory issue. Check this metalink document:
OUI-67105 Due To Missing Or Corrupted Central Inventory In 10g
Doc ID: Note:417236.1
~ Madrid

HT4847 Help please. I updated the iOS version and I couldn't understand an essence of synchronization of my files. Now memory of phone is empty: there are neither photos nor contacts... Whether it is possible to return everything if the backup copy too is

Help please. I updated the iOS version and I couldn't understand an essence of synchronization of my files. Now memory of phone is empty: there are neither photos nor contacts... Whether it is possible to return everything if the backup copy too is empty?

Sorry to hear that, but this forum is for us, users, and what you need is someone from Xperia Care to find your motherboard and send it back, I don't think it'll be possible to retrieve any data from a broken motherboard.
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

Firefox keeps opening tabs on it's own whether I am on-line or not. I have reset several times and there are no pipe characters in the home page address.

Firefox keeps opening tabs whether I am on-line or not. These are often games pages, but not always. I have reset several times and there are no pipe characters in the home page address. This is not the first time this has happened. The first time was a couple of months ago and a reset cured the problem, but this time it does not. How can I stop this occurring?

'''''If this can happen with Firefox completely closed:'''''
Some malware simply launches pages in your default browser from outside Firefox. Definitely scan for malware using some of the tools listed in our support article: [[Troubleshoot Firefox issues caused by malware]].
There might be an additional step:
Last year, many users reported advertising tabs opening randomly, sometimes even when Firefox was closed. It turned out that a program had created scheduled tasks to open those pages at certain times of day.
You can check the Windows Task Scheduler:
* Windows XP: Start button > [All] Programs > Accessories> System Tools > Scheduled Tasks
* Windows Vista/7: Start button > Control Panel > System and Security > Administrative Tools > Task Scheduler
* Windows 8: ?? You might try the charms bar search box if you don't find it in the control panel.
* Past threads on the "dsite" problem:
** [https://support.mozilla.org/questions/967667 How can I keep Firefox from opening a window to website tofushopnews.com]
** [https://support.mozilla.org/questions/965048?page=2#answer-461509 How do I get rid of sponsorship tabs that open automatically?]

How to backout a Recommended Patch cluster deployment in Solstice disksuite

Hello Admin's,
I am planning to use the following Plan of action for deploying the latest Solaris 8 Recommended Patch cluster on the production server's i support.My
concern is if the patching activity fails or the application and Oracle databases dont come up after deploying the patch cluster.How do i revert back to system to its original state using the submirror's which i have detached prior to patching the system :
1) Will shutdown the applications and the databases on the server:
2) Will capture the output of the following commands :
df -k
ifconfig -a
contents of the files /etc/passwd /etc/shadow /etc/vfstab /etc/system
metastat -p
netstat -rn
prtvtoc /dev/rdsk/c1t0d0s0
prtvtoc /dev/rdsk/c1t1d0s0
3) We bring the system to the ok prompt
4) We will try to boot the system from both the disk's which are part of the d10 metadevice for root filesystem
=======================================================================================
user1@myserver>pwd ; df -k / ; ls -lt | egrep '(c1t0d0s0|c1t1d0s0)' ; prtconf -vp | grep bootpath ; metastat d10
/dev/dsk
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d10 8258597 3435895 4740117 43% /
lrwxrwxrwx 1 root root 43 Jul 28 2003 c1t0d0s0 -> ../../devices/pci@1c,600000/scsi@2/sd@0,0:a
lrwxrwxrwx 1 root root 43 Jul 28 2003 c1t1d0s0 -> ../../devices/pci@1c,600000/scsi@2/sd@1,0:a
bootpath: '/pci@1c,600000/scsi@2/disk@0,0:a'
d10: Mirror
Submirror 0: d11
State: Okay
Submirror 1: d12
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 16779312 blocks
d11: Submirror of d10
State: Okay
Size: 16779312 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s0 0 No Okay
d12: Submirror of d10
State: Okay
Size: 16779312 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s0 0 No Okay
user1@myserver>
===================================================================================
ok nvalias backup_root <disk path>
Redefine the boot-device variable to reference both the primary and secondary submirrors, in the order in which you want to access them. For example:
ok printenv boot-device
boot-device= disk net
ok setenv boot-device disk backup_root net
boot-device= disk backup_root net
In the event of primary root disk failure, the system automatically boots from the secondary submirror. To test the secondary submirror, boot the system manually, as follows:
ok boot backup_root
user1@myserver>metadb -i
flags first blk block count
a m p luo 16 1034 /dev/dsk/c1t0d0s7
a p luo 1050 1034 /dev/dsk/c1t0d0s7
a p luo 2084 1034 /dev/dsk/c1t0d0s7
a p luo 16 1034 /dev/dsk/c1t1d0s7
a p luo 1050 1034 /dev/dsk/c1t1d0s7
a p luo 2084 1034 /dev/dsk/c1t1d0s7
o - replica active prior to last mddb configuration change
u - replica is up to date
l - locator for this replica was read successfully
c - replica's location was in /etc/lvm/mddb.cf
p - replica's location was patched in kernel
m - replica is master, this is replica selected as input
W - replica has device write errors
a - replica is active, commits are occurring to this replica
M - replica had problem with master blocks
D - replica had problem with data blocks
F - replica had format problems
S - replica is too small to hold current data base
R - replica had device read errors
user1@myserver>df -k
Filesystem kbytes used avail capacity Mounted on
/dev/md/dsk/d10 8258597 3435896 4740116 43% /
/dev/md/dsk/d40 2053605 929873 1062124 47% /usr
/proc 0 0 0 0% /proc
fd 0 0 0 0% /dev/fd
mnttab 0 0 0 0% /etc/mnttab
/dev/md/dsk/d30 2053605 937231 1054766 48% /var
swap 2606008 24 2605984 1% /var/run
swap 6102504 3496520 2605984 58% /tmp
/dev/md/dsk/d60 13318206 8936244 4248780 68% /u01
/dev/md/dsk/d50 5161437 2916925 2192898 58% /opt
user1@myserver>metastat d40
d40: Mirror
Submirror 0: d41
State: Okay
Submirror 1: d42
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4194828 blocks
d41: Submirror of d40
State: Okay
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s4 0 No Okay
d42: Submirror of d40
State: Okay
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s4 0 No Okay
user1@myserver>metastat d30
d30: Mirror
Submirror 0: d31
State: Okay
Submirror 1: d32
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 4194828 blocks
d31: Submirror of d30
State: Okay
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s3 0 No Okay
d32: Submirror of d30
State: Okay
Size: 4194828 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s3 0 No Okay
user1@myserver>metastat d50
d50: Mirror
Submirror 0: d51
State: Okay
Submirror 1: d52
State: Okay
Pass: 1
Read option: roundrobin (default)
Write option: parallel (default)
Size: 10487070 blocks
d51: Submirror of d50
State: Okay
Size: 10487070 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t0d0s5 0 No Okay
d52: Submirror of d50
State: Okay
Size: 10487070 blocks
Stripe 0:
Device Start Block Dbase State Hot Spare
c1t1d0s5 0 No Okay
user1@myserver>metastat -p
d10 -m d11 d12 1
d11 1 1 c1t0d0s0
d12 1 1 c1t1d0s0
d20 -m d21 d22 1
d21 1 1 c1t0d0s1
d22 1 1 c1t1d0s1
d30 -m d31 d32 1
d31 1 1 c1t0d0s3
d32 1 1 c1t1d0s3
d40 -m d41 d42 1
d41 1 1 c1t0d0s4
d42 1 1 c1t1d0s4
d50 -m d51 d52 1
d51 1 1 c1t0d0s5
d52 1 1 c1t1d0s5
d60 -m d61 d62 1
d61 1 1 c1t0d0s6
d62 1 1 c1t1d0s6
user1@myserver>pkginfo -l SUNWmdg
PKGINST: SUNWmdg
NAME: Solstice DiskSuite Tool
CATEGORY: system
ARCH: sparc
VERSION: 4.2.1,REV=1999.11.04.18.29
BASEDIR: /
VENDOR: Sun Microsystems, Inc.
DESC: Solstice DiskSuite Tool
PSTAMP: 11/04/99-18:32:06
INSTDATE: Apr 16 2004 11:10
VSTOCK: 258-6252-11
HOTLINE: Please contact your local service provider
STATUS: completely installed
FILES: 150 installed pathnames
6 shared pathnames
19 directories
1 executables
7327 blocks used (approx)
user1@myserver>
=======================================================================================
5) After successfully testing the above we will bring the system to the single user mode
# reboot -- -s
6) Detach the following sub-mirrors :
# metadetach -f d10 d12
#metadetach -f d30 d32
#metadetach -f d40 d42
#metadetach -f d50 d52
# metastat =====> (to check if the submirror�s are successfully detached)
7) Applying patch on the server
After patch installation is complete will be rebooting the server to single user mode
# reboot -- -s
confirming if patch installation was successful (uname �a) .
8) Will be booting the server to the multiuser mode (init 3) and confirming with the database and the application teams if the
Applications/databases are working fine .Once confirmed successful will be reattaching the d12 submirror.
# metattach d12 d10
# metattach d30 d32
#metattach d40 d42
# metattach d50 d52
# metastat d10 =====> (to check the submirror is successfully reattached)
user1@myserver>uname -a ; cat /etc/release ; date
SunOS myserver 5.8 Generic_117350-04 sun4u sparc SUNW,Sun-Fire-V210
Solaris 8 HW 12/02 s28s_hw1wos_06a SPARC
Copyright 2002 Sun Microsystems, Inc. All Rights Reserved.
Assembled 12 December 2002
Mon Apr 14 17:10:09 BST 2008
-----------------------------------------------------------------------------------------------------------------------------

Recommended patch sets are and to the best of my knowledge have always been regenerated twice a month.
I think your thinking of maintenance releases. When they generate a new CD image which can be used to do an upgrade install.
They try to generate those every 6 months, but the schedule often slips.
The two most recent were sol10 11/06 and sol10 8/07.

There are many rt.jar

Question 1:
==========
- I started with JDK1.2.2 but lately installed JBUILDER development tools that has JDK1.3 I assume I could delete the 1.2.2 files
- I re-adjusted the PATH env variable to contain c:\jbuilder\jdk1.3\bin instead of the previous c:\jdk1.2.2\bin. It did made my life easier when I compile my codes using javac (since I have deleted the old 1.2.2 folder)
This is not a classpath problem/question. I am not having any problem to find my user class when I try to run javac or java.
I assume javac (invoke it under the command prompt in DOS) will find its needed Java platform classes from the new directory jdk1.3 and not from the previous jdk1.2.2 folder. Question is:how does it know? I was told I could safely delete all files under c:\jdk1.2.2 after installing Jbuilder and I did.
Question 2:
==========
This is similar situation when running an application. I have installed the Java plug-in because I think I need them if I need to test an Applet running under a web browser. For some reasons I installed different versions of Java run time environments onto my same machine. In my machine folder c:\program files\javasoft\ I've got three(3) different subfolders 1.2, 1.3.1, and 1.3.1_02 now.
When I run the JVM command java or the Appletviewer command, how do I know whether the system will find it Java platform classes from the new c:\program files\javasoft\jre\1.3.1.02\lib\rt.jar or from the former c:\program files\javasoft\jre\1.3.1\lib\rt.jar folder?
Question 3:
==========
How about the rt.jar classes in the development kit. For example, the one residing under c:\jbuilder\jdk1.3\jre\lib\ folder? Which one is my machine choosing, this one or the one under javasoft\jre\1.3.1_02. And how could I find out?
Hope these questions make sense.

Question 1:
I assume javac (invoke it under the command prompt in DOS) will find its needed Java platform classes from the new directory jdk1.3 and not from the previous jdk1.2.2 folder. Question is:how does it know?
The PATH (not CLASSPATH) variable is used by Windows/DOS to locate executable programs. The current (working) directory is automatically included in this list. When you type "javac foo.java", Windows/DOS starts looking for an executable named "javac" - the extension could be exe, com, or bat - first in the current directory, then in each of the directories listed in the PATH, from left to right. The first match is executed; if no match is found, the error message "Bad command or file name" is produced. For the rest of the answer, see Question 3
Question 2:
I assume javac (invoke it under the command prompt in DOS) will find its needed Java platform classes from the new directory jdk1.3 and not from the previous jdk1.2.2 folder. Question is:how does it know?
This is a messy one. First, the current Java Plugin Control Panel has a tab that allows you to specify the version of the plugin. This has evolved from version to version, and the greatest change was made between 1.2 and 1.3. Because of the evolving changes, I'm not sure what you see. (I've forgotten, I'm using 1.4.1_02) Anyway, you can specify a version to be used. If it's left at "Default", then normally the last installed version is used (but problems that Sun has had can change this - see the Buglist). If applets are involved, then it gets really messy - see the Plugin Developer's Guide http://java.sun.com/j2se/1.4.1/docs/guide/plugin/developer_guide/contents.html for the details.
Question 3:
How about the rt.jar classes in the development kit. For example, the one residing under c:\jbuilder\jdk1.3\jre\lib\ folder? Which one is my machine choosing, this one or the one under javasoft\jre\1.3.1_02. And how could I find out?
Depends on what executable is invoked - e.g., the rt.jar that was installed with the version of the executable will be used (in a perfect world). In reality, Sun has had a number of problems getting this matter sorted out (the evolution, ya know), so there could be a number of posssibilities. And you're right, there are a couple of Registry key/values that are involved. The easiest way to find out is to experiment - just rename one of the copies and try it out.
You can delete all of the older versions - unless you need to maintain multiple versions for compatibility purposes. Sun (and me!) recommends this - in fact, you'll get the cleanest update if you delete the old version first, then install the new version. This is about to change though - Sun is working on a real update-in-place - and it may make it into 1.4.2.

Problem: installing Recommend Patch Cluster: patch 140900-10 fails

I don't know if this is correct location for this thread (admin/moderator move as required).
We have a number of Solaris x86 hosts (ie 4) and I'm trying to get the patched and up to date.
I obtained the latest Recommended Patch Cluster (dated 28Sep2010).
I installed it on host A yesterday, 2 hours 9 mins, no problems.
I tried to install it on host B today, and that was just a critical failure.
Host B failed to install 140900-01, because the non global zones rejected the patch because dependancy 138218-01 wasn't installed in the non global zones.
Looking closer, it appears that 138218-01 is for global zone installation only; so it makes sense that the non global zones rejected it.
However, both hosts were in single user mode when installing the cluster and both hosts have non global zones.
140900-01 installed on host A with log:
| This appears to be an attempt to install the same architecture and
| version of a package which is already installed. This installation
| will attempt to overwrite this package.
|
| Dryrun complete.
| No changes were made to the system.
|
| This appears to be an attempt to install the same architecture and
| version of a package which is already installed. This installation
| will attempt to overwrite this package.
|
|
| Installation of <SUNWcsu> was successful.
140900-1 failed on host B with this log:
| Validating patches...
|
| Loading patches installed on the system...
|
| Done!
|
| Loading patches requested to install.
|
| Done!
|
| Checking patches that you specified for installation.
|
| Done!
|
|
| Approved patches will be installed in this order:
|
| 140900-01
|
|
| Preparing checklist for non-global zone check...
|
| Checking non-global zones...
|
| Checking non-global zones...
|
| Restoring state for non-global zone X...
| Restoring state for non-global zone Y...
| Restoring state for non-global zone Z...
|
| This patch passes the non-global zone check.
|
| None.
|
|
| Summary for zones:
|
| Zone X
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
|
| Zone Y
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
|
| Zone Z
|
| Rejected patches:
| 140900-01
| Patches that passed the dependency check:
| None.
|
| Fatal failure occurred - impossible to install any patches.
| X: For patch 140900-01, required patch 138218-01 does not exist.
| Y: For patch 140900-01, required patch 138218-01 does not exist.
| Z: For patch 140900-01, required patch 138218-01 does not exist.
| Fatal failure occurred - impossible to install any patches.
| ----
| patchadd exit code : 1
| application of 140900-01 failed : unhandled subprocess exit status '1' (exit 1 b
| ranch)
| finish time : 2010.10.02 09:47:18
| FINISHED : application of 140900-01
It looks as if the patch strategy is completely different for the two hosts; both are solaris x86 (A is a V40z; B is a V20z).
Trying to use "-G" with patchadd crabs the patch is for global zones only and stops (ie it's almost as if it thinks installation is being attempted in a non global zone).
Without "-G" same behavior as patch cluster install attempt (no surprise there).
I have inherited this machines; I am told each of these machines were upgraded to Solaris 10u6 in June 2009.
Other than the 4-5 months it took oracle to get our update entitlement to us, we've had no problems.
I'm at a loss here, I don't see anyone else having this type of issue.
Can someone point the way...?
What am I missing...?

Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O

SunOS 5.11, there are whether Recommended patches?

Similar Messages

Maybe you are looking for