Sunstudio in Ubuntu 7.10 (Some trouble regarding static libary)

Dear freinds,
I install sunstudio 12 from "SunStudio12ml-linux-x86-200709-ii[1].tar.bz2" in my Ubuntu 7.10 operating system.
My Directory of installation is /opt/sun
I install "jdk-6u5-nb-6_0_1-linux-ml.sh" in /usr/java
The configuration of PC:
=================
Linux dell-desktop 2.6.22-22-14-generic #1 SMP Tue Feb 12 07:42:25 UTC 2008 i686 GNU/Linux
Operating system:
=============
Ubuntu
Release 7.10 (gusty)
kernel Linux 2.6.22-14 generic
GNOME 2.20.1
Processor type:
================
Intel(R) Core(TM)2 Duo CPU T7500 @2.20 GHz
ERROR:
======
I am getting the following error while compilling f95 file--------------------------
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/opt/sun/sunstudio12/prod/lib/libfsu.a(__f90_init.o): In function `__f90_init_f77compat':
__f90_init.c:(.text+0x96): undefined reference to `atexit'
/opt/sun/sunstudio12/prod/lib/libfsu.a(initio.o): In function `__f90_initio_a':
initio.c:(.text+0x106): undefined reference to `fstat64'
initio.c:(.text+0x176): undefined reference to `fstat64'
initio.c:(.text+0x1af): undefined reference to `fstat64'
initio.c:(.text+0x317): undefined reference to `fstat64'
initio.c:(.text+0x37e): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(initio.o):initio.c:(.text+0x3b7): more undefined references to `fstat64' follow
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_old_a':
open.c:(.text+0x3c9): undefined reference to `lstat64'
open.c:(.text+0x460): undefined reference to `lstat64'
open.c:(.text+0x4c6): undefined reference to `lstat64'
open.c:(.text+0x560): undefined reference to `lstat64'
open.c:(.text+0x870): undefined reference to `lstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o):open.c:(.text+0xb82): more undefined references to `lstat64' follow
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_old_a':
open.c:(.text+0xe46): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_new_a':
open.c:(.text+0x1649): undefined reference to `lstat64'
open.c:(.text+0x16e9): undefined reference to `lstat64'
open.c:(.text+0x18e7): undefined reference to `lstat64'
open.c:(.text+0x1a0e): undefined reference to `lstat64'
open.c:(.text+0x1b35): undefined reference to `lstat64'
open.c:(.text+0x1c18): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_scratch_a':
open.c:(.text+0x2241): undefined reference to `fstat64'
open.c:(.text+0x235a): undefined reference to `stat64'
open.c:(.text+0x23a3): undefined reference to `stat64'
open.c:(.text+0x23e9): undefined reference to `stat64'
open.c:(.text+0x2429): undefined reference to `stat64'
open.c:(.text+0x27a8): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_a':
open.c:(.text+0x3354): undefined reference to `lstat64'
open.c:(.text+0x338b): undefined reference to `fstat64'
open.c:(.text+0x3af5): undefined reference to `fstat64'
open.c:(.text+0x3dd4): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_old_r':
open.c:(.text+0x50fd): undefined reference to `lstat64'
open.c:(.text+0x5194): undefined reference to `lstat64'
open.c:(.text+0x51f6): undefined reference to `lstat64'
open.c:(.text+0x5343): undefined reference to `lstat64'
open.c:(.text+0x547b): undefined reference to `lstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o):open.c:(.text+0x55b5): more undefined references to `lstat64' follow
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_old_r':
open.c:(.text+0x5629): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_scratch_r':
open.c:(.text+0x58a2): undefined reference to `fstat64'
open.c:(.text+0x5997): undefined reference to `stat64'
open.c:(.text+0x59f0): undefined reference to `stat64'
open.c:(.text+0x5a3b): undefined reference to `stat64'
open.c:(.text+0x5a7e): undefined reference to `stat64'
open.c:(.text+0x5de9): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(open.o): In function `open_r':
open.c:(.text+0x65e3): undefined reference to `lstat64'
open.c:(.text+0x661a): undefined reference to `fstat64'
open.c:(.text+0x6b5e): undefined reference to `lstat64'
open.c:(.text+0x6c13): undefined reference to `lstat64'
open.c:(.text+0x6d1a): undefined reference to `lstat64'
open.c:(.text+0x6dc5): undefined reference to `lstat64'
open.c:(.text+0x6e72): undefined reference to `lstat64'
open.c:(.text+0x6eda): undefined reference to `fstat64'
open.c:(.text+0x7171): undefined reference to `fstat64'
open.c:(.text+0x74c0): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(sfw.o): In function `__f90_ssfw':
sfw.c:(.text+0x3ce05): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(sfw.o): In function `__f90_ssfw_pos':
sfw.c:(.text+0x3d370): undefined reference to `fstat64'
/opt/sun/sunstudio12/prod/lib/libfsu.a(sfw.o):sfw.c:(.text+0x3d49f): more undefined references to `fstat64' follow
make: *** [test1] Error 1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Could anybody please give me a solution for this.
Thank you,
Regards,
Panjit

Thank you very much,
Even though it is not a total solution.........But I can work with Dynamic libary.
It works with dynamic option for all code...........But in future I may have to work with static libary....I dont know what to do then.
Can you please sugesst any solution so that I can use Bstatic option.
But I am happy because I can work for my code and your sugesssions works well for me.
Thank you
Kind Regards,
Pranjit

Similar Messages

  • Need some explanations regarding static Method

    Hello,
    I have a code where a class has a static method access by other classes. This not working as I thought and I would like to understand why.
    Here below is the code.
    Here is a class having the static method "test"
    package test;
    public class StaticTest {
        public StaticTest() {
        public static void test (int i){
        while (i < 1000){
            System.out.println("i = " + i );
            i++;
    }Here is the code of another class (Thread) using this static method. This Thread can be initialized with an integrer value that will be passed to the static Method.
    package test;
    public class ThreadTester extends Thread {
        int x;
        public ThreadTester(int i) {
            x=i;
        public void run(){
            StaticTest.test(x);
    }Here is the code starting 2 Thread running in parallel and both are then calling the static method.
    //start 2 thread accessing the static method.
          ThreadTester test1 = new ThreadTester(0);
          ThreadTester test2 = new ThreadTester(200);
          test1.start();
          test2.start();
    ...As the second thread is started with a bigger value I thought that we would only have seen few printouts from the first thread starting by 0 and then printouts starting by 200.
    Here is what I thought regarding the result:
    i = 0
    i = 1
    i = 2
    i = 3
    i = 200 --> startup of the second thread, x in static method is overriden (at least this is what I thought!)
    i = 201
    i = 202
    i = 203
    i = 204
    i = 205
    i = 206
    i = 207
    i = 208
    i = 209
    But the real result is:
    i = 0
    i = 1
    i = 2
    i = 3
    i = 4
    i = 5
    i = 200
    i = 6
    i = 201
    i = 202
    i = 203
    i = 204
    i = 205
    i = 206
    i = 7
    i = 207
    i = 208
    i = 209
    i = 8
    It seems that there is 2 instances running in parallel. I thought that it would'nt be the case with the word "Static".
    Also I don't understand the result because if I use JBuilder in Optimizer mode I can see that there is only one instance of StaticTest object.
    Can anyone here explain me how is that possible?
    Thanks in advance for your help.
    Regards,
    Alain.

    >
    thread test1 creates its own stack and starts incrementing �i� starting at values 0. However, in the middle of incrementing, it gets kicked out by the OS (or JVM) into a �blocked� state to allow other threads to run. BUT before leaving the running state, test1 saves the stack state including the value of �i�.
    >
    Ok, now I understand, but then I have another question.
    What is the difference between the code shown in my first post and the following where we create 2 instances of StaticTest class (which is not static in this case for sure).
    How to decide (while coding) if it is better to use difference instances of class or not?
    package test;
    public class StaticTest {
        public StaticTest() {
        public void test (int i){ //Not static anymore
        while (i < 1000){
            System.out.println("i = " + i );
            i++;
    }We create new instance in the Thread.
    package test;
    public class ThreadTester extends Thread {
        int x;
        public ThreadTester(int i) {
            x=i;
        public void run(){
    StaticTest newInstance = new StaticTest(); //Create a new instance
            newInstance .test(x);
    }Alain

  • OEM in 10g RAC (10.2.0.2.0) has some troubles!![ help]

    Hi, all.
    The database is 2 node RAC (10.2.0.2.0 ) on 32 bit windows 2003 EE SP1.
    The Enterprise Manager is not Grid Control.
    I created a RAC database by using DBCA, and Enterprise Manager was
    installed by default.
    Currently, It seems that the database has some troubles.
    Depending on the cases, OEM sessions go into pending status.
    Now, I stopped "DBconsole windows services" and thus emagent is not running.
    1. Does Enterprise Manager have something to do with ADDM and AWR snapshots?
    2. Are there any Enterprise Manager bugs?
    I have to make a quick report to my boss. :(
    Any help will be greatly appreciated.
    ● from emagent.trc
    2007-09-24 00:05:02 Thread-4264 WARN http: snmehl_connect: connect failed to (NMSP110:1158): 対象のコンピュータによって拒否されたため、接続できませんでした。
    (error = 10061)
    2007-09-24 00:05:02 Thread-4264 ERROR upload: FxferSend: Cannot connect to: http://NMSP110:1158/em/upload/. retStatus=-1
    2007-09-24 00:05:02 Thread-4264 ERROR upload: Failed to upload file B0003153.xml, ret = -2
    2007-09-24 00:05:03 Thread-4264 WARN http: snmehl_connect: connect failed to (NMSP110:1158): 対象のコンピュータによって拒否されたため、接続できませんでした。
    (error = 10061)
    2007-09-24 00:05:03 Thread-4264 ERROR upload: FxferSend: Cannot connect to: http://NMSP110:1158/em/upload/. retStatus=-1
    2007-09-24 00:05:03 Thread-4264 ERROR upload: Failed to upload file B0003153.xml, ret = -2
    2007-09-24 18:27:31 Thread-5180 ERROR util.files: nmeufile_getLength: Error in lfilen. Error = 0 (No error)
    ● From emos.trc
    2007-09-22 00:00:02,046 [JobWorker 1785:Thread-20] ERROR em.jobs executeCommand.159 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup to set required parameters.
    2007-09-23 00:00:04,578 [JobWorker 1788:Thread-20] ERROR em.jobs executeCommand.159 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup to set required parameters.
    2007-09-24 00:04:33,515 [HealthMonitor] ERROR emd.main run.270 - HealthMonitor : Found errant task : TaskRegn:ID3,Callback:class oracle.sysman.emdrep.jobs.Dispatcher,Iterative:true,Duration:300,DueTime:1190559873500
    2007-09-24 00:04:33,515 [HealthMonitor] ERROR emd.main restart.389 - HealthMonitor 2007/09/24 0:04:33 Job Dispatcher error: Job Dispatcher timed out. Job Dispatcher id=784
    2007-09-24 00:04:33,515 [CacheManager] ERROR cache.CacheManager run.519 - Exception message: sleep interrupted
    java.lang.InterruptedException: sleep interrupted
         at java.lang.Thread.sleep(Native Method)
         at oracle.sysman.emSDK.svc.cache.CacheManager$Checker.run(CacheManager.java:507)
         at java.lang.Thread.run(Thread.java:534)
    2007-09-24 00:05:15,359 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ias.ias.IASIntegration
    2007-09-24 00:05:15,500 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.eml.target.slb.common.SLBIntegration
    2007-09-24 00:05:15,531 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.eml.ssl.intg.SSLIntegration
    2007-09-24 00:05:15,593 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.tip.oem.central.domain.ProcessConnectDomainIntg
    2007-09-24 00:05:15,593 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
    2007-09-24 00:05:15,593 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.webdb.admin.em.SSOIntegration
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.reports.em.RepIntg
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsEmailIntegration
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOidIntegration
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
    2007-09-24 00:05:15,609 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
    2007-09-24 00:05:16,187 [JobWorker 1791:Thread-13] ERROR em.jobs executeCommand.159 - UpdateARUTables: Oracle MetaLink credentials are incorrect or missing. Click Patching Setup to set required parameters.
    2007-09-25 08:49:00,269 [CacheManager] ERROR cache.CacheManager run.519 - Exception message: sleep interrupted
    java.lang.InterruptedException: sleep interrupted
         at java.lang.Thread.sleep(Native Method)
         at oracle.sysman.emSDK.svc.cache.CacheManager$Checker.run(CacheManager.java:507)
         at java.lang.Thread.run(Thread.java:534)
    Thanks and Regards.
    Message was edited by:
    user507290

    Dear rodneyli.
    Thanks for your reply.
    My understanding is it's better to use Grid Control to manage RAC. From the >documentation, it says database console can be used as well but i haven't used it.Could you give me the html link, which explains the difference between Grid Control and DB console?
    Thanks and Regards.

  • Some troubles after installing SP2

    Greetings to all,
    we're experiencing some troubles after the installation of the service pack 2 for Excelsius 2008: formatting options of various components are not matching what we see on the dashboard in preview mode (for example, values in horizontal progress bars or values in list views show numbers like 123.456,78000 while the formatting option is set to 2 decimals and show thousand separator. Same strange behaviour in percentage values where you see 00% while the relative option is set to percentage, 1 decimal).
    Is there any workaround or any solution to this problem?
    It's quite annoying.
    Thanks for your help

    Hi Claudio,
    you only need to use a crossdomain file if your Xcelsius model is retrieving data from a domain different than yours.
    Error 2170 is from a security nature in adobe. Mark your files as trusted here:
    http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager04.html
    For more information refer to following document:
    http://help.sap.com/businessobject/product_guides/xcelsius2008SP3/en/Xcelsius2008SP3_user_guide_en.pdf#page=347
    Regards
    Victor

  • I have some questions regarding setting up a software RAID 0 on a Mac Pro

    I have some questions regarding setting up a software RAID 0 on a Mac pro (early 2009).
    These questions might seem stupid to many of you, but, as my last, in fact my one and only, computer before the Mac Pro was a IICX/4/80 running System 7.5, I am a complete novice regarding this particular matter.
    A few days ago I installed a WD3000HLFS VelociRaptor 300GB in bay 1, and moved the original 640GB HD to bay 2. I now have 2 bootable internal drives, and currently I am using the VR300 as my startup disk. Instead of cloning from the original drive, I have reinstalled the Mac OS, and all my applications & software onto the VR300. Everything is backed up onto a WD SE II 2TB external drive, using Time Machine. The original 640GB has an eDrive partition, which was created some time ago using TechTool Pro 5.
    The system will be used primarily for photo editing, digital imaging, and to produce colour prints up to A2 size. Some of the image files, from scanned imports of film negatives & transparencies, will be 40MB or larger. Next year I hope to buy a high resolution full frame digital SLR, which will also generate large files.
    Currently I am using Apple's bundled iPhoto, Aperture 2, Photoshop Elements 8, Silverfast Ai, ColorMunki Photo, EZcolor and other applications/software. I will also be using Photoshop CS5, when it becomes available, and I will probably change over to Lightroom 3, which is currently in Beta, because I have had problems with Aperture, which, until recent upgrades (HD, RAM & graphics card) to my system, would not even load images for print. All I had was a blank preview page, and a constant, frozen "loading" message - the symbol underneath remained static, instead of revolving!
    It is now possible to print images from within Aperture 2, but I am not happy with the colour fidelity, whereas it is possible to produce excellent, natural colour prints using its "minnow" sibling, iPhoto!
    My intention is to buy another 3 VR300s to form a 4 drive Raid 0 array for optimum performance, and to store the original 640GB drive as an emergency bootable back-up. I would have ordered the additional VR300s already, but for the fact that there appears to have been a run on them, and currently they are out of stock at all, but the more expensive, UK resellers.
    I should be most grateful to receive advice regarding the following questions:
    QUESTION 1:
    I have had a look at the RAID setting up facility in Disk Utility and it states: "To create a RAID set, drag disks or partitions into the list below".
    If I install another 3 VR300s, can I drag all 4 of them into the "list below" box, without any risk of losing everything I have already installed on the existing VR300?
    Or would I have to reinstall the OS, applications and software again?
    I mention this, because one of the applications, Personal accountz, has a label on its CD wallet stating that the Licence Key can only be used once, and I have already used it when I installed it on the existing VR300.
    QUESTION 2:
    I understand that the failure of just one drive will result in all the data in a Raid 0 array being lost.
    Does this mean that I would not be able to boot up from the 4 drive array in that scenario?
    Even so, it would be worth the risk to gain the optimum performance provide by Raid 0 over the other RAID setup options, and, in addition to the SE II, I will probably back up all my image files onto a portable drive as an additional precaution.
    QUESTION 3:
    Is it possible to create an eDrive partition, using TechTool Pro 5, on the VR300 in bay !?
    Or would this not be of any use anyway, in the event of a single drive failure?
    QUESTION 4:
    Would there be a significant increase in performance using a 4 x VR300 drive RAID 0 array, compared to only 2 or 3 drives?
    QUESTION 5:
    If I used a 3 x VR300 RAID 0 array, and installed either a cloned VR300 or the original 640GB HD in bay 4, and I left the Startup Disk in System Preferences unlocked, would the system boot up automatically from the 4th. drive in the event of a single drive failure in the 3 drive RAID 0 array which had been selected for startup?
    Apologies if these seem stupid questions, but I am trying to determine the best option without foregoing optimum performance.

    Well said.
    Steps to set up RAID
    Setting up a RAID array in Mac OS X is part of the installation process. This procedure assumes that you have already installed Mac OS 10.1 and the hard drive subsystem (two hard drives and a PCI controller card, for example) that RAID will be implemented on. Follow these steps:
    1. Open Disk Utility (/Applications/Utilities).
    2. When the disks appear in the pane on the left, select the disks you wish to be in the array and drag them to the disk panel.
    3. Choose Stripe or Mirror from the RAID Scheme pop-up menu.
    4. Name the RAID set.
    5. Choose a volume format. The size of the array will be automatically determined based on what you selected.
    6. Click Create.
    Recovering from a hard drive failure on a mirrored array
    1. Open Disk Utility in (/Applications/Utilities).
    2. Click the RAID tab. If an issue has occurred, a dialog box will appear that describes it.
    3. If an issue with the disk is indicated, click Rebuild.
    4. If Rebuild does not work, shut down the computer and replace the damaged hard disk.
    5. Repeat steps 1 and 2.
    6. Drag the icon of the new disk on top of that of the removed disk.
    7. Click Rebuild.
    http://support.apple.com/kb/HT2559
    Drive A + B = VOLUME ONE
    Drive C + D = VOLUME TWO
    What you put on those volumes is of course up to you and easy to do.
    A system really only needs to be backed up "as needed" like before you add or update or install anything.
    /Users can be backed up hourly, daily, weekly schedule
    Media files as needed.
    Things that hurt performance:
    Page outs
    Spotlight - disable this for boot drive and 'scratch'
    SCRATCH: Temporary space; erased between projects and steps.
    http://en.wikipedia.org/wiki/StandardRAIDlevels
    (normally I'd link to Wikipedia but I can't load right now)
    Disk drives are the slowest component, so tackling that has always made sense. Easy way to make a difference. More RAM only if it will be of value and used. Same with more/faster processors, or graphic card.
    To help understand and configure your 2009 Nehalem Mac Pro:
    http://arstechnica.com/apple/reviews/2009/04/266ghz-8-core-mac-pro-review.ars/1
    http://macperformanceguide.com/
    http://www.macgurus.com/guides/storageaccelguide.php
    http://www.macintouch.com/readerreports/harddrives/index.html
    http://macperformanceguide.com/OptimizingPhotoshop-Configuration.html
    http://kb2.adobe.com/cps/404/kb404440.html

  • HT201342 I am having some trouble trying to back up my notes to my iCloud account, i have tried to delete my icloud account and create a new one, but still when i back my phone up on iCloud my notes do not seem to be backed up.How can i back up by notes o

    I am having some trouble trying to back up my notes to my iCloud

    Not photos, just data synced with iCloud shown in Settings>iCloud.  If you don't have sufficient storage to back up to iCloud, back up to your computer instead using iTunes (connect you phone to your computer, open iTunes, click on the name of your phone in iTunes, go to ths Summary tab of your iTunes sync settings and click Back Up Now).  Also transfer your purchases to your iTunes library (connect your phone to your computer, open iTunes and go to File>Devices>Transfer Purchases). If you have photo stream photos older than 30 days tha you wan to save, save these to your camera roll before backing up (tap Select, tap the photos, tap the share icon -- box with upward facing arrow, then tap Save to Camera Roll).
    When setting up your new phone, when given the option choose Restore from iTunes Backup and restore the backup you made earlier.

  • I'm having some trouble transferring audio books to my iPhone.  It usually takes 3 or 4 tries to get all the parts transferred.  I didn't use to have this problem - all parts would transfer in one try.

    I'm having some trouble transferring audio books to my iPhone.  It usually takes 3 or 4 tries to get all the parts transferred.  I didn't use to have this problem - all parts would transfer in one try.

    carolinechx wrote:
    i know the description may be a little bit too confusing
    Mostly because you are not using any capital letters or paragraph returns and your post is difficult to read.

  • I have some trouble with Safari!  Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me!

    I have some trouble with Safari! 
    Everytime i google something, I expect safari to open the link i click in the same window and same tab - as it did before - but now it always opens a new tab! I'm getting really tired of that! So please help me! I want safari to open the google search link in the same window and tab! How to fix that?
    Please help me!!!
    Thank you!

    From the Safari menu bar, select
    Safari ▹ Preferences ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • Some questions regarding CO-PA

    Hello Experts,
    I have some questions regarding de COPA module:
    1-Where can i find wich G/L accounts are assigned to a especific condition type? Is there any transaction where i can check the g/l accounts for the condition types?
    2-I heard that the condition type VPRS is statistical, can anyone explain me this concept?..wich accounts are assigned to this condition type?
    3-Does anyone has a list of the most relevat transactions for COPA? especially regarding the value flows and the closing.
    Thnak you for your support!
    Leandro.

    Hi,
    a) VKOA transaction
    b) try reading this one: http://help.sap.com/erp2005_ehp_04/helpdata/EN/40/c52df80d1e11d2b5cf0000e82de856/frameset.htm Statistical means that the value in the CO-PA document for VPRS is also updated (truly) in other CO component. For example, revenue could be assigned truly to CO-PA segment and statistically to, let's say, cost centre. With material costs - it's the opposite.
    c) most of the data is flowing to CO-PA from other modules. However, just go to the standard menu: the transactions for CO-PA are not so many.
    Regards,
    Eli

  • Have some doubt regarding the  weblog (Lookup's in XI made simpler)

    Hi All,
    I have created the same scenario as mentioned in Siva's weblog (Lookup's in XI made simpler).
    I having some doubts regarding the scenario, it will be great if you help me to resolve the same.
    I am having a file-file scenario where I need to do lookup in database(MS-Access)  through mapping.
    The standard file-file scenario is in place and in addition I have created a receiver jdbc channel . I  have also created the receiver agreement for the same in the cofiguration.
    While creating the receiver agreement you have to specify the interface name which includes the message type…I have specified the normal format which we specify while configuring the jdbc receiver adapter.
    In the message mapping I have created a advance user defined function as mentioned in your weblog which calls my receiver jdbc channel.
    I have also specified the select query to be executed in the mapping program.
    While testing I am getting the following error
    Cannot produce target element /ns0:Role_MT/URole. Check xml instance is valid for source xsd and target-field mapping fulfills requirements of target xsd
    <b>Can you please suggest me what all I need to do in addition to the file-file scenario for this lookup scenario to work.</b>
    Thanks and Regards
    Rahul

    Hi,
    Following is my user defined function
    //write your code here
    String Query = "";
    Channel channel = null;
    DataBaseAccessor accessor = null;
    DataBaseResult resultSet = null;
    Query = "Select URole from  Lookup where UName = '  " + UName[0] + "  ' and UPassword = '  " + Pwd[0] +" '  ";
    try{
    channel = LookupService.getChannel("DB_service","JDBC_channel_receiver");
    accessor = LookupService.getDataBaseAccessor(channel);
    resultSet  = accessor.execute(Query);
    for(Iterator rows = resultSet.getRows();rows.hasNext();){
    Map rowMap = (Map)rows.next();
    result.addValue((String)rowMap.get("URole"));
    catch(Exception ex){
    result.addValue(ex.getMessage());
    finally{
    try{
    if (accessor!= null) accessor.close();
    catch(Exception ex){
    result.addValue(ex.getMessage());
    Thanks and Regards
    Rahul

  • I have some trouble With the graph XY, if I display a curve and try to zoom on it, it may be corrupted, or may disappeare​d.

    In fact this happens on some computers. the graph XY causes some trouble when zooming. Sometimes, when I run my main program and open the window with the graph, it has change the displayed it overflows to the edge of the windows. Or somtimes it works but if I zoom the curves disappeared, or is corrupted.
    I have this for instance on a computer with win 98 and a ATI graphic board. So I try to update all drivers but noting has changed. I try to decrease the hardware acceleration, and it seems to happen less oftenly.
    Does anybody have seen that kind of trouble ?

    > I have some trouble With the graph XY, if I display a curve and try to
    > zoom on it, it may be corrupted, or may disappeared.
    >
    I think what you are describing is not due to video driver, but rather
    to the way the graph works. The LV graph maps points to integer screen
    coordinates and draws lines be tween those point. When the numbers are
    way to large to fit on the screen, the numbers are pinned to a special
    large value. When this happenson one axis but not the other, it causes
    the slope of the line to change and potentially not cross the screen.
    If this is the same effect I'm describing, it only takes place when you
    zoom into the data by a large extent, pushing the other points about ten
    to fifteen monitors away. At this point you are no longer
    looking at
    measured data, but rather just on the interpolation of a line between
    two points. The solution if you must have one is to resample your data
    on the diagram to contain more points.
    Greg McKaskle

  • Some trouble in setSize() method

    I writed some code for resize jpanel's size,It work well in J2SE131,but it have some trouble in J2SE141.
    Now I write one test program for test this problem.code list under this statement.
    import java.awt.*;
    import java.awt.event.*;
    import javax.swing.*;
    public class Frame1 extends JFrame {
    private JPanel contentPane;
    private BorderLayout borderLayout1 = new BorderLayout();
    private JScrollPane jScrollPane1 = new JScrollPane();
    private JPanel jPanel1 = new JPanel();
    //Construct the frame
    public Frame1() {
    enableEvents(AWTEvent.WINDOW_EVENT_MASK);
    try {
    contentPane = (JPanel) this.getContentPane();
    contentPane.setLayout(borderLayout1);
    this.setSize(new Dimension(400, 300));
    this.setTitle("Frame Title");
    jPanel1.setPreferredSize(new Dimension(400, 280));
    jPanel1.addMouseListener(new java.awt.event.MouseAdapter() {
    public void mouseClicked(MouseEvent e) {
    jPanel1_mouseClicked(e);
    contentPane.add(jScrollPane1, BorderLayout.CENTER);
    jScrollPane1.getViewport().add(jPanel1, null);
    catch(Exception e) {
    e.printStackTrace();
    //Overridden so we can exit when window is closed
    protected void processWindowEvent(WindowEvent e) {
    super.processWindowEvent(e);
    if (e.getID() == WindowEvent.WINDOW_CLOSING) {
    System.exit(0);
    void jPanel1_mouseClicked(MouseEvent e) {
    System.out.println(jPanel1.getSize());
    jPanel1.setSize((int)(jPanel1.getWidth()*1.2),(int)(jPanel1.getHeight()*1.2));
    System.out.println(jPanel1.getSize());
    System.out.println("*******");
    public static void main(String[] args){
    Frame1 f = new Frame1();
    f.show();
    compile it,and run it under J2SE131,jPanel1 can zoom in container--jScrollPane1.
    but in J2SE141,it can setSize,out windows:
    java.awt.Dimension[width=400,height=280]
    java.awt.Dimension[width=480,height=336]
    java.awt.Dimension[width=400,height=280]
    java.awt.Dimension[width=480,height=336]
    java.awt.Dimension[width=400,height=280]
    java.awt.Dimension[width=480,height=336]
    it said setSzie() work OK,but jPanel1's size recover again.
    I want know why it happend,and how to make it work well in J2SE141.
    Thanks a lot.
    [email protected],cn

    I add one statement after setSize() sttement,it can work well in J2SE141.
    jPanel1.setPreferredSize(new Dimension((int)(jPanel1.getWidth()*1.2), (int)(jPanel1.getHeight()*1.2)));
    It maybe get preferred size in update method(),why sun'doc not notice about this?

  • Hi Sir! I have some questions regarding word report generation please.1.How can i add border to a word page?.2.How can i add grid lines to a table generated in word report?.3.How can i add border to a table of word report?.Thanks Imran Pakistan

    Hi !
    Sir I have some questions regarding word report generation using(C language in labwindows) Please.
    1.How can i add border to a word page?.
    2.How can i add border and grid lines to a table generated in word report(Not the " cvi table control" inserted from gui,i am asking about the table generated in word report)?
    3.How can i fill a cell of word report table withe the data type other than "character"?.
    And sir one question about use of timer in cvi labwindows please.
    Sir i'm trying to set minimum delay interval of timer control to 1millisecond(0.001s),as i set ,timer don't cares of the interval that is set by me it responds only to the default minimum time interval which is i think 10milliseconds(i'am using windows xp service pack3 version 2002).
    Regards
    Imran
    Pakistan
    Solved!
    Go to Solution.

    Hello sir!
    Sir i'm using daq6251.But Sir before implimenting it to my final application now i'm just trying to achieve 1millisecond time interval for timer in a vary simple programe i mean at this time no hardware (daq device) is  involved i,m just trying to achieve minimum time interval of 1millisecond.
    Sir i read form "help" of labwindows how this time interval can be set,i'm trying for,as described in help notes but i could'nt.I'm attaching a screen shot sir for you it may helpful for you to explain me.
    And sir also waiting for your kind reply regarding word report generation.
    Thanks.
    Imran.
    Attachments:
    screen_shot_rigistry.docx ‏65 KB

  • How can I install purchased Apps from my ipad to my New imac? I have some Troubles to find and install.

    Hi,
    I have some trouble to find and install
    my purchased Apps which I use on my Ipad
    since 1 Year ago.
    I also use the actually Itunes Version.
    :-) Thanks for helping.
    Edmund-sky

    File>Devices>Transfer Purchases

  • Hi! I have some troubles with my iphone 4...

    Hi! I have some troubles with my iphone 4 since a few months. Sometimes, suddenly, it pretends to discharge very fast, but when it comes to 1% I can still use it for hours. Also, when I recharge it, nothing would change at the 1%-note but the battery seems to be fully charged. The first and second time this happened, I made the mistake to turn the phone off because I thought a restart would solve the problem. But it made it worse: The Iphone wouldn't turn on again. I tried all the tricks with home + power button and also tried to connect it to itunes on my macbook, but nothing happend. When I connect the charger it shows me that the battery is empty (which isn't the case - I also tried different wires). After a few hours a little miracle occured and the **** thing turned on all by itself and pretended as if nothing happened.
    The third time this happend I didn't turn the phone off and just used it normally. I took care that the battery is always full and after a few days it was normal again.
    Now it happened again but I had no wire with me at work and the battery ran low and the phone turned off. Now I'm trying to "reanimate" it for 2 days now...nothing. The last times it took 3hours to 12 hours until it would awake but now...
    Does anyone know this problem and knows how to solve it? As I said, I already tried the "press the home button and powerbutton and both and whatever" tricks for a few times but it doesn't change anything....
    Cheers,
    Diana

    Buzz! Thank you for playing!
    You're out of luck. At least here. Discussing jailbroken devices is forbidden by the terms of service.
    It's likely the jailbreak has permanently hosed it.

Maybe you are looking for