SUNWdc CNS data collector package missing in Solaris U7 05/09

Hi All,
I found that SUNWdc package is missing in Solaris U7 05/09 package list. It is present in Solaris 11/06 release. Can you please let me know why this package is not part of Solaris U7 05/09 list. What is the purpose of this package.
Thanks,
Ram.

Similar Messages

Solaris 8 07/01 installation : Fast Data Access MMU Miss

hello,
Because of a hardware crash of my 9.1Gb hard drive, I plugged a brand new 40Gb drive in my Ultra 10 workstation.
I tried to re-install my release of Solaris 8 (06/00), but this release detect only a 5Gb hard drive (but the installation work).
I downloaded and burned Solaris 8, release 07/01 to break the 32Gb/drive limit, but when I type 'boot cdrom' or 'boot cdrom install' at the bios prompt, I get :
Fast Data Access MMU Miss.
I upgraded the PROM to the lastest version, and tried to reburn the CD.
Does someone has any idea to help me ?
Greg.

974009 wrote:
Hello all,
I have been working on a Sun Netra T1 105 for the past two weeks That system is too old for Solaris 11 and Solaris 10. That generation UltraSPARC module isn't going to be recognized by those newer OS's.
I suggest you go to your preferred online auction web site (for example, eBay) and get any Solaris 8(SPARC) or Solaris 9(SPARC) for that little 1U box.
I have disabled auto boot so when it starts it is going to the ok prompt.Smart. Good move for troubleshooting.
The CD of Solaris 11 is a new one that I burned just two weeks ago and I burned it on 24x speed.
And it is the Sparc version that I downloaded.
I also tried installing a DVD-ROM with the Solaris 10 DVD but it gave the same error.I hope that means you replaced the original CD reader with a DVD-capable drive.
When I type probe-ide it shows that the seconday Master is a Removable ATAPI Model: TOSHIBA CDROM XM-7002BcYes. Since that model computer was discontinued in 2002, there was only a CD-capable drive ever qualified to be used in it.
When I type probe-scsi it shows:
Target 0
Unit 0 Disk Seagate ST39103LCSUN9.0G034AA 9GB disk isn't going to be large enough for much more than just a core install of Solaris. You may again need to get larger drive(s) at that same online auction web site. The chassis can hold two internal disks.
Thank you very much.
Hendrik
Edited by: 974009 on 29-Nov-2012 07:34When you get the chance, glance at this link to a copy of the Netra T105's resource page as it appeared in the old Sun System Handbook (SSH). The link is to a non-Oracle site that mirrors the old now-discontinued free version of that SSH.
Next, while there's not much system documentation for that box offered by Oracle, you can glance through what there happens to be here:
http://docs.oracle.com/cd/E19628-01/index.html

Missing Data Cleanse package option in Data services Repository Manager

Hello, I am trying to create a repository for data cleansing package repository in database using Repository Manager, but the drop down list box is not giving an option "Data Cleansing" to create repository. Only three values are available (Local,CEntral, and Profile).
Using Data Services 3.0 Version. Any help or any workarounds creating a repository with our Repository Manager.
Thanks,
Kiran

We searched log files and found no errors.
We then decided to attempt re-creating the local repository. We checked the Show Details box.
The local repository was reported has having been successfully created. This was the result we had before.
We then checked for canned functions and the list matched to those of our Oracle and SQL Server local repositories.
So, best guess is that something went wrong on the initial local repository creation that was either not reported or reported, but we missed.

Error while scheduling data collector: Error adding routine 'SAPTOOLS.DBH_FWK_CLEANUP' to task scheduler

Error Detail
Exception CX_DBA_ADBC in program RAGS_SISE_ACTIVITY_JOB line 0
Kernel Error ID:
WP ID: 23
WP PID: 28977
SYSID: CR5
SY-SUBRC: 0
SQL statement:
Database: CR5
caused by
Exception CX_SQL_EXCEPTION in class CL_SQL_STATEMENT
Kernel Error ID:
DB Error: Yes
SQL Code: 444-
SQL Message: SQL0444N Routine "*TASK_ADD" (specific name "SQL140704080729140") is implemented with code in library or path "...ib/function/SYSPROC.ADMIN_TASK_ADD", function "*" which cannot be accessed. Reason code: "4". SQLSTATE=42724 row=1
DB Object Exists: No
Duplicated Key: No
Internal Error: 1
Invalid Cursor: No
Unknown Connection: No
Connection Closed: No
System Detail:
Solman 7.1
ST    710    0010    SAPKITL710    SAP Solution Manager Tool
SAP_BASIS    702    0013    SAPKB70213    SAP Basis Component
Managed system:
SAP CRM ABAP 7.0
SAP_BASIS    701    0005    SAPKB70105    SAP Basis Component
SAP_ABA    701    0005    SAPKA70105    Cross-Application Component
PI_BASIS    701    0005    SAPK-70105INPIBASIS    Basis Plug-In
ST-PI    2008_1_700    0008    SAPKITLRD8    SAP Solution Tools Plug-In
CRMLOY    700    0005    SAPK-70005INCRMLOY    CRM Loyalty Management 700
SAP_BS_FND    701    0005    SAPK-70105INSAPBSFND    SAP Business Suite Foundation
SAP_BW    701    0005    SAPKW70105    SAP Business Warehouse
LCAPPS    2005_700    0007    SAPKIBHD07    LC Applications (LCAPPS) 2005_700
Database DB2
db2level
DB21085I Instance "db2cr5" uses "64" bits and DB2 code release "SQL09016" with
level identifier "01070107".
Informational tokens are "DB2 v9.1.0.6", "s081007", "U817474", and Fix Pack
"6".
Activity detail:
We are performing managed system configuration for CRM into Solman by using solman_setup transaction. While performing the Database Extractor Setup in step 8 we have observed above error.
Action take at our end:
1. Clean the LMDB and restart the configuration. - no luck
2. Upgrade the hostagent at CRM - No luck
3. Update the SLD for CRM entry - no luck
4. implemented SAP notes:
875986    Note Assistant: Important notes for SAP_BASIS up to 702
1246964    Note Assistant: Master language of notes incorrect
1262653    SPAU: New object is deleted after note is reset
1309424    DB6: DBA Cockpit Correction Collection SAP Basis 7.01 / 7.11
1335017    DB6:"Remove Redundant Restrictions" can return wrong results
1349277    Note Assistant: Method cannot be implemented
1365677    Note Assistant: Runtime error MOVE_CAST_ERROR during implmtn
1372652    DB6: Short dump when viewing diaglog due to NULL bytes
1373957    DB6: CX_SY_CONVERSION_OVERFLOW in new EXPLAIN
1376543    DB6: OPTIONS parameters for backup jobs in DB13
1378499    DB6: CLI error CLI0112E with "REORGCK_ALL" job
1379260    DB6: Add BW query name as comment to SQL statements
1379346    DB6: Scheduling of data collectors fails
1381179    DB6: Incorrect values for 'number of objects in tablespace'
1382634    DB6: Unable to create view 'SAPTOOLS.DBH_TABCLASS'
1382996    DB6: Update of DPW Back-End in Monitored DBs does not work
1384238    DB6: Defect scheduler on DB2 9.1 FP7/FP8 for LUW on Linux
1387022    DBA Cockpit: Month displayed incorrectly in DB13C
1387297    DB6: SQL-Fehler 901 during RUNSTATS and REORGCHK
1397709    Ignore Dynpro element fields AGLT and ADEZ in SNOTE/CWB
1398258    DB6: Job REORGCK_ALL places load on package cache
1400843    DB6: Incorrect display of key fields in EXPLAIN
1412719    SNOTE: error when implementing enhancement implementations
1413008    DB6: SQL0206N in function module DB6_PM_LOCKSNAP
1414624    DB6: Performance views if database monitors are deactivated
1414626    DB6: Incorrect display of file system sizes of containers
1415680    Note Assistant: Incorrect status in subsequent systems
1421157    DB6: SQL error 204 when accessing table DBSTATC
1425487    SE24: Error regarding READ-ONLY for complex attributes
1426092    DB6: Incorrect DROPPED TABLE clause for tablespaces
1426480    DB2: Incorrect display of registry values for DPF systems
1427030    DB6: Container specifications for tablespaces not changeable
1429082    DB6: No REORG after deactivating compression
1429687    DB6: SQL cache performance
1438168    DB6: REORGCHK recommendations for indexes are missing
1444373    DB6: Loading the package cache with monitor functions
1449482    DB6: Error message 'Command LIST_DB2DUMP failed'
1451958    DBA Cockpit: Incorrect start time for jobs
1452197    DB6: SQL error 100 in job REORGCK_ALL
1452502    DBA Cockpit: Jobs are missing in central planning calendar
1455897    DB6: Display of data classes is not updated
1456379    DB6: No display of indexes in data classes
1460895    DB6: SQL0104N during creation of WLM threshold
1462415    DB6: SQL -444 error messages in system log
1462855    DB6: Incorrect database name in HA environment
1464800    DB6: SQL Commands executes automatically on system change
1464858    DB6: COMPUTE_BCD_OVERFLOW during EXPLAIN Test Execute
1469515    DB6: Runtime error GETWA_NOT_ASSIGNED_RANGE in SAPLSDB6MON
1485313    DBA Cockpit: Incomplete system entries after SLD import
1486972    DB6: Parameters for DB/DBM configuration cannot be changed
1489968    DBA: DBA Cockpit WebDynpro does not care about HTTPURLLOC
1496515    DB6: SQL error 1428N when starting the DBA Cockpit
1501130    DB6: SQL error 802 in DB6_DIAG_COUNT_TABLE_ENTRIES
1508074    RZ20: 'Connection' attribute does not report alerts
1509121    DBA Cockpit: Endless loop occurs when starting DBA Cockpit
1511803    DB6: DB_TABLE_DATA_READ does not return data
1521525    DB6: Table display is not sorted
1522617    DB6: Availability of BW-specific functions in DBA Cockpit
1532114    DB6: Too many locks when collecting table history
1536787    DBA Cockpit: WebDynpro Explain - LOADDATA requires a model
1542311    DB6: Runtime error BCD_OVERFLOW in auto maintenance display
1546866    DB6: Runstats_DBSTATC interprets runtime param. incorrectly
1551729    DB6: Incorrect number of key fields in EXPLAIN
1552812    DB6: Use of db2sap functions
1559699    DB6: Missing data in SQL cache display
1559967    DB6: SQL error 206 when collecting the table history
1563327    DB6: SQL error SQL0551N when accessing SYSSTAT.TABLES
1568800    DB6: Error when deleting alert messages
1569592    DB6: SQL error SQL0433N in EXPLAIN
1569669    DB6: Incomplete history for performance data
1571365    DB6: SQL error SQL0443N in alert monitoring of DPF system
1576094    DB6: Database error SQL1751N in partitioning wizard
1597281    DB6: Incorrect compression displays for tables
1599764    DB6: SQL error 1428 when calling transaction SM50
1602403    DB6: No VOLATILE attribute after RUNSTATS or REORG job
1613270    DB6: Runtime error DYNPRO_FIELD_CONVERSION in DBA cockpit
1615698    DBA Cockpit: Incorrect date selection in DB13C
1619084    DBA Cockpit: Runtime err MESSAGE_TYPE_X when alert displayed
1619636    DBA Cockpit: Daily scheduling is not deleted
1624436    DBA Cockpit: Errors when accessing SHM area CL_DBA_SHM_AREA
1639631    DBA Cockpit: Failed schedulings in DB13
1720495    Invalid deimplementation of obsolete notes by Snote tool
Kindly suggest the correct solution to fix the issue.

Dear Deepak
Thanks for quick response.
Note 1462415 - DB6: SQL -444 error messages in system log ( SAP_BW 701 SP7 suggested)
This is already implemented and updated in my 1st message.
Note 978319 - DB6: Incorrectly cataloged table functions
This note can not be implemented due to version issue.
Kindly suggest some more hints on top of what I already did.
Regards
Bipin

Reg:Activity Data Collector

Hi All,
Greetings!!!
Happy New Year!!!
Coming to the query, i need to implement Activity Data Collector Report, but the configuration needs an application named "com.sap.portal.activitydatacollector"; but that is not available in our enterprise portal 6.0. So kindly tell whether this comes under which support package. Or to resolve this issue.
Thanks
Piiyush

Hello,
If you needed a graphical front-end or multiple reporting capabilities, one would need to build something themselves as described at the link above, which may not be convenient, nor offer all the usage stats you are looking for. The ADC simply does not offer a graphical front-end and does not come with integrated reports.
Otherwise a far easier solution is to switch to a 3rd party application like Click Stream SAP Portal analyzing solution from Sweetlets. (http://www.sweetlets.com/click_stream_overview.html or http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream) This plug n' play application offers various SAP Portal usage reports complete with a visually appealing Flex frontend.
Good luck.
Burt

Regarding Activity Data Collector Report..

Hi All,
My portal doesnt have Activity data collector report which needs application as "com.sap.portal.activitydatacollector".
Pl tell me where should i find it or do i have to install some patch or package.
thanks
Piiyush

Hi all,
Please see [SAP Note 1178889|https://service.sap.com/sap/support/notes/1178889|Link] for information on how to use ADC with NW04 SPS21.
Also see [Release Notes of NW04s SPS14|http://help.sap.com/saphelp_nw70/helpdata/EN/46/e28f3aeb4168dfe10000000a114a6b/frameset.htm], for availability info on NW04s
Best regards

Activating Activity Data Collector

Hi,
I have configured the activity Data Collector according to the below documentation.
http://help.sap.com/saphelp_nw70/helpdata/EN/47/8ac2e51b141e1ee10000000a42189d/frameset.htm
But it appears that the ADC only starts colllecting logs, if the Portal Activity Report Service is also turned on. I thought ADC was supposed to be a competing activity collection technology and I dont understand this dependancy.
Am I right in this or am I missing something else?
Thanks
Raj Balakrishnan

Hello,
If you needed a graphical front-end or multiple reporting capabilities, one would need to build something themselves as described at the link above, which may not be convenient, nor offer all the usage stats you are looking for. The ADC simply does not offer a graphical front-end and does not come with integrated reports.
Otherwise a far easier solution is to switch to a 3rd party application like Click Stream SAP Portal analyzing solution from Sweetlets. (http://www.sweetlets.com/click_stream_overview.html or http://ecohub.sdn.sap.com/irj/ecohub/solutions/clickstream) This plug n' play application offers various SAP Portal usage reports complete with a visually appealing Flex frontend.
Good luck.
Burt

Activity Data Collector field

Hi all,
I'm working with the Activity Data Collector so that I can see which KM files have been accessed. I'm trying to get the main file format field to display for me the ip address of the person who accessed the file in KM. This is a pretty typical thing to display in web server log files, but I cannot for the life of me figure out how to do it here.
Also, I'm looking for a list of the properties available for use with the rfo.up code.
Here is the web site that I'm using for my information on this:
http://help.sap.com/saphelp_nw70/helpdata/EN/46/e4de7fdc8e72dde10000000a114a6b/content.htm
Thanks!
-Stephen Spalding

Stephen -
We are using the activity collector, but I have not seen IP address as a parameter.
I have configured ours to use:
%Orfo.sid%%Stab%%Orfo.t(d-MMM-yyyy hh:mm:ss,GMT)%%Stab%%Orfo.un%%Stab%%Orfo.qs%%Stab%%Orfo.bt%%Stab%%Orfo.uid%%Stab%%Orfo.un%%Stab%%Okmc.et%%Stab%%Okmc.linktype%%Stab%%Okmc.folder%%Stab%%Okmc.displayname%%Stab%%Okmc.targeturl%%Stab%%Okmc.hr%%Stab%%Okmc.g%%Stab%%Okmc.hor%%Stab%%Okmc.resourcetype%%Stab%%Okmc.contenttype%%Stab%%Okmc.created%%Stab%%Okmc.createdby%%Stab%%Okmc.modified%%Stab%%Okmc.modifiedby%%Snl%
However, several parameters (like SID, User Name, UID) do not get logged for Web Page Composer files, which is disappointing.
Also, I would like to log the file's folder (Okmc.folder) location, but that does not get logged for any files.
I have looked at the config, but I am not sure if I am missing anything.
Has anyone noticed this? Or do you have any issues with logging for WPC files?

User IP Address in ADC (Activity Data Collector)

Hi all,
I would like to use Activity Data Collector. First previews of the generated logs looks fine but I miss the logged User IP Address.
Does someone know how to get the IP Address?
Maybe I missed a parameter, so please tell me which parameter logs the User IP Address (NOT the server).
ADC file format / parameter: http://help.sap.com/saphelp_nw70/helpdata/en/46/e4de7fdc8e72dde10000000a114a6b/frameset.htm
Thanks and regards,
Stefan

Hi,
chk this also
[http://help.sap.com/saphelp_nw04s/helpdata/en/7f/c52442ad9f5133e10000000a155106/content.htm]
[http://help.sap.com/saphelp_nw04s/helpdata/en/0b/50ad3e1d1edc61e10000000a114084/content.htm]
Regards
Baby

Installation of SUNWfontconfig packages on a Solaris 12/03 release?

Hi!
I have a SunfireV880 with the following release installed:
Solaris 9 12/03 s9s_u5wos_08b SPARC
# I have applied the the following 9_Recommeded Patch cluster to the system but I found the following ERROR in the
/var/sadm/install_data/Solaris_9_Recommended_Patch_Cluster_log
Installing 117203-05...
Checking installed patches...
One or more patch packages included in
117203-05 are not installed on this system.
Patchadd is terminating.
Installing 117201-09...
Checking installed patches...
ERROR: This patch requires patch 117203-04
which has not been applied to the system.
After some analysis of dependencies I installed patch 116105-06 and tried to apply patch 117204-05 and 117203-04 but both failed since SUNWfontconfig is not installed.
I found the missing packages on the Solaris 9 9/05 Disk 1
SUNWfontconfig/
SUNWfontconfig-64/
SUNWfontconfig-docs/
SUNWfontconfig-root/
I have also installed
hostxxx:opt/patch> pkginfo | grep SUNWzlib
system SUNWzlib The Zip compression library
system SUNWzlibx The Zip compression library (64-bit)
Is there any way to install SUNWfontconfig* packages safely without doing a complete Solaris 9 9/05 release upgrade?
Any known dependencies
I have tried to Google for a solution to this issue but with no sucess.
Appreciate any input.
/Bengt
Found a thread touch�ng this issue
http://forum.java.sun.com/thread.jspa?forumID=840&threadID=5104139
Message was edited by: Bengt
Sparc_User
Message was edited by:
Sparc_User

I was wrong about VCS not being important for the installation of the database on a zone. The database installed fine outside of VCS control from the Oracle 11gR2 download online, however, VCS 6.0 PR1 does not seem to support Oracle agents for Solaris 11, this is what their software requirements are:
Supported software for VCS agent for Oracle
The VCS 6.0 Platform Release 1 agent for Oracle supports the following software
versions in a Veritas Cluster Server (VCS) environment:
Oracle 10g R2, Oracle 11g R1, and Oracle 11g R2 (including 64-bit
versions)
Note: Veritas Cluster Server agent for Oracle supports the specified
Oracle versions on Solaris if Oracle supports that version on Solaris.
Refer to the Veritas Cluster Server Release Notes for more details.
Oracle
VCS VCS 6.0 PR1 on Solaris
For Solaris SPARC:
Solaris 10 (32-bit and 64-bit)
For Solaris x64:
Solaris 10 (64-bit)
Note: For each platform, Symantec recommends applying the latest
Solaris operating system patches available from Oracle. Visit Oracle’s
Web site to download the latest patches.
Solaris
There is no "ContainerOpts" attribute in VCS 6.0 PR1 for Solaris11......

Ufoai-data might be missing language files

Wanted to report this as a bug on the bug tracker, but the bug tracker doesn't let me register myself, so here I am.
I have a problem with the new release of UFO: AI (version 2.4). ufoai-data might be missing language files. I don't have (nearly) any text in UFO: AI, no story introduction (besides "introduction_sentence_1"), no Ufopedia entry (it says something like "grenade_launcher_txt") and no mail text (only says "mail_txt"). An ufo: ai dev thinks, that the packager might have forgot to build the language files.
Could someone confirm, that there is a problem and that it is the missing language files? Thanks.

Just in case anyone is still having this issue running ufoai, also make sure to check in your in-game settings that language is set to "English" or whatever language you like. My was set to "No Language" by default, and changing the exec line is absolutely neccessary even if you select a language.
In XFCE, I went to /usr/share/applications directory and edit ufoai.desktop as root.
Change the line "Exec=ufo" to "Exec=/usr/bin/ufo +set fs_i18ndir /usr/share/ufoai/base/i18n/"
Then restart from your menu and set your language. You are good to go.
Thought this might be helpful, sometimes ingame settings are easy to overlook.

Change of sign when running the data management package

Hi All,
I have written a script logic for copying my Budget member under category dimension to say another member say "XYZ" under category dimension and this is for my Member Sales under ACcount dimension having acctype as inc.
When i run the logic thru default i am getting the correct value. however if i run the same thru data manager package- my sign changes.
Eg. 100000 is copied as -100000 and -50000 is copied as 50000.
Please help me out
Regards
Navin

Hi Navin,
CREDITPOSITIVE= YES | NO
Default: YES
If No, all amounts referring to an ACCOUNT type (LEQ, INC) will have their signs reversed.
Since you are referring to the member account sales as INC the default logic considers the sign as reversed.
Please look at this link which helps you to understand
Significance of Account Type EXP,LEQ,INC,AST in BPC- Need some valid reason
Hope this helps.
Regards,
Sanjeev

Preview transformation file in data manager package

Dear BPC Experts,
When we try to preview Tranformation file while running data manager package to import transaction data from BW, we are getting following error. We do not get this error if we use load from flat file package.
We are on BPC 10 PS06, EPM Add-in SP14 patch3.
Has anybody seen this issue before? We can paste the entire log if required.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.ArgumentException: Separator cannot be null and must contain only one char
Parameter name: separator
   at FPMXLClient.DataManager.CsvParser.Parse(String data, String separator, Boolean hasHeader) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\DataManager\CsvParser.cs:line 15
   at FPMXLClient.DataManager.UI.Forms.FilePreview.BuildDataArrayFromCsv(String data) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 487
   at FPMXLClient.DataManager.UI.Forms.FilePreview.BuildDataArray(String data, Boolean formatted) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 414
   at FPMXLClient.DataManager.UI.Forms.FilePreview.SpecialFilesProcessing() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 406
   at FPMXLClient.DataManager.UI.Forms.FilePreview.DisplayData() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 351
   at FPMXLClient.DataManager.UI.Forms.FilePreview.InitializePreview() in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 102
   at FPMXLClient.DataManager.UI.Forms.FilePreview.FilePreview_Load(Object sender, EventArgs e) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\DataManagerUI\Forms\FilePreview.cs:line 740
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at FPMXLClient.UILayer.Forms.BaseForm.OnLoad(EventArgs e) in d:\Olympus_100_REL_XLCLIENT\src\FPMXLClient\src\UILayer\UI\Forms\Base\BaseForm.cs:line 70
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Best Regards,
Ashwin.

Hi Raju,
Thank you for your reply.
It seems that it is SP related issue. When we downgrade our EPM Add-in to SP13 patch4, it did not throw any error.
Best Regards,
Ashwin.

Error in Execution of Data Manager Package

Hi Folks,
We are facing the following error while executing the Data Manager Package for Clear/Import..
Error Details:
[Admin-ProcessPartition]Errors in the OLAP storage engine: The attribute key cannot be found: Table: dbo_tblFactFinance, Column: ENTITY, Value: CONEUROPE.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Errors in the OLAP storage engine: An error occurred while processing the 'FAC2Finance_INCR_UPDATE_TEMP_kmj3h_' partition of the 'Finance' measure group for the 'Finance' cube from the YASH6 database.
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation.
Internal error: The operation terminated unsuccessfully.
Please Look into it.....

Hello,
It looks like you have an inconsistency on the OLAP level. Please try to reprocess Entity dimension choosing full process for your application. This should solve the issue.
Best regards,
Mihaela

My data tab is missing in settings on ipad

My data tab is missing in "settings" on my ipad

What iOS version do you use? I'm nof familiar with the "data tab." Where did you notice it before?

SUNWdc CNS data collector package missing in Solaris U7 05/09

Similar Messages

Maybe you are looking for