SUP sync problem: Category products not found on WSUS

Hello,
Updates stopped working suddenly for clients, and the clients reported back with message: "Client check passed/Active".
I can't say much about it because I have to be honest, I didn't do much troubleshooting.
I went straight to re-configuration of SUP/WSUS.
So I removed the SUP CM role, and WSUS and re-installed everything again.
I did this several times now and followed similar procedures, but slightly different.
Basically:
Remove SUP
Remove WSUS
Restart
Install WSUS
Install the two famous updates
Restart
Add SUP role
Environment (one machine):
Server: 2008 R2
SCCM: 2012 SP1 - 5.0.7804.1000
WSUS 3.0 SP2 with both KB's
Syncing doesn't work.
From the wsyncmgr.log I'd say that SCCM is unable to communicate with WSUS.
From the wcm.log I'd think that Category Products are enabled on SCCM which cannot be found on WSUS, which I find a strange reason to block the whole Updating process but who am I to critisize. :-)
The problem is that I can't find these products in SCCM, let alone disable.
I really hope someone can help me out with this as this is starting to drive me crazy.
Also tried to run the WSUS configuration wizard partially until the products but that didn't help either.
Each time I restart the whole configuration, when I add the SUP role it seems to remember my settings. Is there a proper way to completely remove SUP?
WCM.log:
Category Product:70cfad70-6629-b54b-5819-c809a605515e (Adobe Flash Player) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
Category Product:e1d507be-497c-d8fd-61d7-b0d93ee399ca (Adobe Reader) not found on WSUS
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
Subscription contains categories unknown to WSUS.
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
Failed to set Subscriptions on the WSUS Server. Error:(-2147467259)Unspecified error
SMS_WSUS_CONFIGURATION_MANAGER 13/12/2013 15:32:12
5572 (0x15C4)
WSYNCMGR.log
Sync failed: WSUS server not configured. Please refer to WCM.log for configuration error details.. Source: CWSyncMgr::DoSync
SMS_WSUS_SYNC_MANAGER 13/12/2013 15:37:12
5660 (0x161C)
STATMSG: ID=6703 SEV=E LEV=M SOURCE="SMS Server" COMP="SMS_WSUS_SYNC_MANAGER" SYS=SVCMSS001.mobilebelgium.be SITE=PS1 PID=5216 TID=5660 GMTDATE=Fri Dec 13 14:37:12.547 2013 ISTR0="CWSyncMgr::DoSync" ISTR1="WSUS server not
configured. Please refer to WCM.log for configuration error details." ISTR2="" ISTR3="" ISTR4="" ISTR5="" ISTR6="" ISTR7="" ISTR8="" ISTR9="" NUMATTRS=0
SMS_WSUS_SYNC_MANAGER 13/12/2013 15:37:12
5660 (0x161C)
Sync failed. Will retry in 60 minutes SMS_WSUS_SYNC_MANAGER
13/12/2013 15:37:12 5660 (0x161C)

After 3 days of screwing around and one afternoon being sure it's related to the two category updates, I have been able to find a way to fix this situation. Not sure if it's the correct way, but it IS a way.
I'd still be grateful if anyone can explain how it could happen, since this fix is not really supported I guess.
But here is what was wrong.
At a certain point in those 3 days I was getting following error in WSYNCMGR.log:
Sync failed: WSUS server not configured. Please refer to WCM.log for configuration error details.. Source: CWSyncMgr::DoSync
SMS_WSUS_SYNC_MANAGER
08/12/2013 23:40:04 4720 (0x1270)
I went into the DB, in the CI_UpdateSources table and changed the value for IsExprired from True to False.
Then I got the error from my original post:
Sync failed: WSUS server not configured. Please refer to WCM.log
for configuration error details.. Source: CWSyncMgr::DoSync
I made sure all category products were disabled (I think they were at this time) and went in the DB to the table CI_UpdateCategorySubscription and found that there were two rows with IsSubscribed set to True. What a coïnsidence the error in WCM.log gave
two category products thta could not be found in WSUS.
I went ahead and set them to False and there you go, sync is doing fine now.
Now I'm going to enable some products and check if sync is still ok, and ultimately check if clients receive the updates.
Questions are:
How could this UpdteSource be flagged as Expired?
How are those two Subscriptions enabled?
The SUP and WSUS have been removed and re-installed at least 3 times or so.
Cheers, hope this can help someone else!

Similar Messages

IPod cannot be synced. Required file not found?

I havent had any trouble syncing my ipod until last week when i purchased a song. When i dragged the song to a playlist on my ipod, it appeared grey in my playlist (because it was still loading) and then disappeared. I repeated this until i gave up and I reported this as an issue to itunes. When i tried again it worked and i thought maybe the problem had fixed itself, but i tried to add a CD to my ipod a few days ago and it only synced half of the songs. Now when i try to sync the leftover songs an error box pops up saying "The iPod (name of ipod) cannot be synced. Required file not found."
Some songs will sync perfectly normal, some load but disappear, some eventually just sync, and some won't sync at all. Has anyone had this problem/ can anyone help SOLVE it? please and thank you!!!

Try this:
Let your iPod charge up.
Attempt to sync a large play list.
When the iPod shuts down and you get the error message, quickly click through the dialog boxes on iTunes so when the iPod comes back up iTunes will attempt to sync again.
When the sync starts again after the iPod reboot, click the little X in the bar that shows how many tracks have been loaded. This will stop the sync and you'll be able to eject your iPod.
After it's been ejected, unplug the connector from the iPod and see what happens to the battery indicator. Mine goes down to almost gone and red - then after a few minutes it comes up to about 2/3 strength - but it should be full after being fully charged and just syncing a few hundred tracks.

Error: PRODUCT NOT FOUND: 2004S in PI_00

Hi,
i have a problem with SAP PI. I have installed the NW PI Release 7.00 SP14 and worked through the Instguide.
When I run the PI_00 "Posinstall steps of technical configuration for PI Usage", on NWA Deploy and Change, I get the following Error.
Error: PRODUCT NOT FOUND: 2004S
Step: Add Installed Product2
Any Ideas? Thank you!

this thread has discussed same issue..hope links inside it will help u like notes etc
PiPostInstallProcess
Post actions of PI installation
gud luck

F110 Auto. payment program ..Problem payment method not found

Hi,
I done the configuration for automatic payment program.with payment method c.
when i am running the program the proposal is created but it is with a error saying no valid payment method found.
Please guide me.
Thanks
Micheal

I had given the payment method C in vendor master,Payment methods in country and payment methods in company code,Bank determination in FBZP.
I am getting the same problem.Payment method not found.Please find the error list
Information re. vendor 1900107 / customer / paying company code 100 ...
Payment with currency USD, payment method C: No valid payment procedure
Information re. vendor 1900107 / paying company code 100 ...
... payment not possible because of reported error
End of log
Job finished
Thanks and best regads
Micheal

Every time I restart or log back on my computer, I get Pop up saying, "Apple Sync Notifier Entry Point Not Found"

I Currently Own 2 Iphones, & 3 ipods & Etc, Etc, stereo's & Asessories, & I have purchased over 3,000 songs from itunes store. I'm Seeking advice On to figure out how I can get rid of a annoying Pop Up that Keeps Coming Up Every single time, I log On, or I restart my Computer. & It always Says same, & it's comes from something called a Apple Sync Notifier, & Entry Point Not Found. 7 Squite_3_wall Check Point could not be located in dynamic link library SQLITE3.dill. >>> ???? Any Ideas to Solve would Bring this Aging Old Man Smile!
Lawrence from NV

Yes it Seems to have Worked, & I Followed Your Advice Today, & I Uninstalled Mobil Me, & Now that Same annoying Little Pop Up Seems to be All Gone, & I Feel I Must THANK YOU, & WISH YOU WELL. & I Will Continue to Keep the Faith in All Things Created in New Zealand & I Will Continue to Enjoy All My istuff, & Continue Onward & Up this Trail that I Ride. & Thanks Again & Good Luck, <<>> Cyber Sincerely from Lawrence in Sin City Las Vegas, NV.

Build unsuccessfull product not found on the system or has been upgraded: daqmx 8.7

I get the following error when doing a build:
The build was unsuccessful.
The following product(s) are not found on the system or have been upgraded:
NI-DAQmx 8.7
I just upgraded from LabView 8.6 to 8.61.
Any ideas?

Hi Friend
You haven't mentioned whether it is occurring while building exe or installer. And I hope this occurring when building a installer. You just try this
Go to installer properties under category select "additional installers" and uncheck all items under the "national instruments installers to include" and then build. If its builds successfully there is no problem in your exe.
You can make separate installer of corresponding Run time engine and Device Drivers from the labview DVD.
This problem may happens when the installer failed to find the path of labview source distribution DVD where the Run time engine and device drivers are located.
Regards
Sam
[email protected]

Ipod 4th generation won't sync "The ipod ...... cannot be synced required file is not found"

I had my computer fixed and so I had redownload itunes again.All my my music got saved to a folder as a backup.Well when I downloaded it,I put all the songs on itunes and tried to sync my ipod to add new music.But,it kept saying it won't sync since required folder is not found.I've looked everywhere online to see what to do.I tried uninstalling everything and again multiple times.The same error kept popping up.I switched to Manually manage music to see if it fixed the problem but no.A different error "the song....could be copied error ..." I switched back to sync.Nothing worked!!I tried restoring but it took so long as if it couldn't work it out.Previously I had this same computer fixed and when I downloaded again itunes it worked perfectly fine until now.Can somebody please guide me what to do?I cannot afford a new one.

A different error "the song....could be copied error ..."
What's the precise text of that error message, please? (Include error message numbers if you're getting any.)

? fixing apple sync notifier.entry point not found. Entry point split3_wal_checkpoint could not be located in the dynamic link library SQLite3.dll.

Upon computer start up I receive message: procedure entry point split3_wal_checkpoint could not be located in the cynamic link library SQLite3.dll.
Apple Sync Notifier.exe Entry Point not found.
Anyone have solution?

IIRC, This problem happens when you have a piece of software installed that either doesn't properly register the DLL it uses, or is improperly installed. The draw back is that if that software is runnig when you install the Apple software, the DLL is loaded, and the Apple software doesn't install the DLL because it already finds it, so it doesn't need to load it. Now you reboot, and the other software isn't running, and Apple can't find it's DLL, so you get the error.
You have a couple of options. You can find the DLL in your "Program Files"\"Common..." folder tree and copy it to the Apple folder where it is giving you the error, or you could properly register the DLL with your OS so that it knows where to find it when it is needed. Another option which should work is to remove the Apple software which is giving you the error, perform a fresh reboot (possibly into safe mode) and re-install the application before you launch anything else.

Syncing to iphone file not found

says cannot sync file not found..? where did it go? never had this problem before

FOund this answer elsewhere and seems to be a good fix.
Unfortunately, iTunes doesn’t say exactly what file is missing. While playing with the sync options in iTunes I found out, that the problem is related to Apple Aperture 3 in my case. If you’re using iPhoto instead of Apple Aperture, you may find a solution in this Apple support note. If you’re getting this error message in iTunes and you’re syncing your Aperture 3 library (or parts of it) to your iPhone, I may have a solution for you.
Make sure Aperture, iTunes and iPhoto are closed. Use cmd-Q to terminate them if they’re still open.
Open Finder
Navigate to your Home -> Pictures folder
Right-click the “Aperture Library.aplibrary” folder and select “Show Package Contents”
You should see a folder named “iPod Photo Cache”
Delete this folder
Start iTunes
Re-enable photo synchronisation in the photo sync tab
Click “Sync Photos” in the dialog that pops up
Choose Aperture to sync sync photos from
iTunes will say that your iPhone is synced to another photo library. Click yes to overwrite the old settings in iPhone.
That’s it! Your iPhone should be syncing without errors now!

Web-application deployment problem (404 - File not found)

Hello
Does anyone have had the same problems like me on deploying java web-applications on iPlanet WS 6.0?
I started with the HelloWorld.war example that came with the server and went through the manual but no luck so far. Heres what I did:
0. Checked that webapps are enabled in the servler.xml file
1. Created a directory /opt/webapps and /opt/webapps/hello with sufficient permissions
2. Copied the HelloWorld.war example to /opt/webapps
3. Deployed the excample on my test-server using the webinterface.
Heres the content of the web-apps.xml file of my testserver after step 3:
[DTD here]
<vs>
<jsp-servlet enable="true">
<init-param>
<param-name>use-precompiled</param-name>
<param-value>true</param-value>
</init-param>
</jsp-servlet>
<web-app uri="/hello" dir="/opt/webapps/hello" enable="true"/>
</vs>
All files have been extracted to /opt/webapps/hello properly. The server has been restarted.
When I finally point my browser to http://server/hello or hello/index.jsp I get only a 404 - File not found message by the server. The context path seems to be totaly ignored.
Heres the error log of the server
[17/Feb/2003:16:17:38] info (12040): successful server startup
[17/Feb/2003:16:17:38] info (12040): iPlanet-WebServer-Enterprise/6.0SP2 B11/13/2001 00:49
[17/Feb/2003:16:17:39] info (12041): Installing a new configuration
[17/Feb/2003:16:17:39] info (12041): [LS ls1] http://XXX.XXX.XXX.XX, port 1080 ready to accept requests
[17/Feb/2003:16:17:39] info (12041): A new configuration was successfully installed
[17/Feb/2003:16:17:40] info (12041): Using the Solaris VM v1.2.2 from Sun Microsystems Inc.
[17/Feb/2003:16:17:40] info (12041): Java VM classpath: /www/ns-home6sp2/plugins/servlets/examples/legacy/beans.10/SDKBeans10.jar:/opt/jdk1.2.2/lib/tools.jar:/www/ns-home6sp2/bin/https/jar/NSServletLayer.jar:/www/ns-home6sp2/bin/https/jar/NSJavaUtil.jar:/www/ns-home6sp2/bin/https/jar/NSJavaMiscUtil.jar:/www/ns-home6sp2/bin/https/jar/servlet.jar:/www/ns-home6sp2/bin/https/jar/servlet-2.3-filters-api.jar:/www/ns-home6sp2/bin/https/jar/jsp092.jar:/www/ns-home6sp2/bin/https/jar/jaxp.jar:/www/ns-home6sp2/bin/https/jar/crimson.jar:/www/ns-home6sp2/bin/https/jar/xalan.jar:/www/ns-home6sp2/bin/https/jar/jspengine.jar:
[17/Feb/2003:16:17:40] info (12041): Loading IWSSessionManager by default.
[17/Feb/2003:16:17:40] info (12041): IWSSessionManager: Maximum number of sessions is 1000
[17/Feb/2003:16:17:40] info (12041): Adding web application (/hello) at (/opt/webapps/hello)
[17/Feb/2003:16:17:40] info (12041): Loading IWSSessionManager by default.
[17/Feb/2003:16:17:40] info (12041): IWSSessionManager: Maximum number of sessions is 1000
[17/Feb/2003:16:17:40] info (12041): vs(https-duke)servlet 'snoop' class = 'SnoopServlet' loaded in context = '/hello'
[17/Feb/2003:16:17:40] info (12041): snoop: init
[17/Feb/2003:16:17:40] info (12041): Successfully initialized web application environment (web-apps.xml) for virtual server (https-duke)

i had similar problem due to the incorrect jdk path...
try http://..../hello/snoop, if this works, it seems that the jsp file cannot be compiled automatically and jdk path needs to be checked...

Weblogic 6 Post Installation Problem - weblogic.Server not found

I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
set CLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
set PATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visual Stud
io\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Visual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
set PATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\Microsoft Visua
l Studio\Common\MSDev98\Bin;D:\Microsoft Visual Studio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath .;.\lib\weblogic_sp.j
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserver "
-Dbea.home=d:\bea" "-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

It looks like your startWebLogic.cmd script has problems with the class
path. You should doublecheck that.
Thanks,
Michael
Michael Girdley
BEA Systems
Learning WebLogic? http://learnweblogic.com
"Bindu Rao" <[email protected]> wrote in message
news:[email protected]...
>
I reinstalled my recent downloads of the evaluation
copy of Weblogic 6.0 server three times on my NT 4.0 Service
pack 6 notebook computer. Installation works. However, I can't
start the server using the "startWebLogic.cmd". I get an error
that says that the class "weblogic.Server" is not
found -
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
javap command cannot locate the class either.
My suspicion: weblogic .jar is corrupt.
Question: How do I get a new jar file? I have already
downloded the install files twice with no luck.
I have enclosed the command prompt messages.
[d:\bea\wlserver6.0\config\myadmindomain]setEnv
set WL_HOME=d:\bea\wlserver6.0
set JAVA_HOME=d:\bea\jdk130
setCLASSPATH=d:\bea\jdk130\lib\tools.jar;d:\bea\wlserver6.0\lib\weblogic_sp.jar
;d:\bea\wlserver6.0\lib\weblogic.jar;
setPATH=d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM32;C:\W
INNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisual Stud
io\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Microsoft V
isual Studio\VB98;D:\Microsoft Visual Studio\VIntDev98\bin;D:\MicrosoftVisual S
tudio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
Your environment has been set.
[d:\bea\wlserver6.0\config\myadmindomain]startWebLogic.cmd
setPATH=.\bin;d:\bea\wlserver6.0\bin;d:\bea\jdk130\bin;c:\junk;C:\WINNT\SYSTEM3
2;C:\WINNT;C:\MWW32\BIN;C:\MWW32\MODEM;D:\Program Files\Mts;.;D:\MicrosoftVisua
l Studio\Common\MSDev98\Bin;D:\Microsoft VisualStudio\Common\IDE\IDE98;D:\Micro
soft Visual Studio\VB98;D:\Microsoft VisualStudio\VIntDev98\bin;D:\Microsoft Vi
sual Studio\VC98\Bin;D:\Microsoft Visual Studio\Common\Tools;
set CLASSPATH=.;.\lib\weblogic_sp.jar;.\lib\weblogic.jar
"d:\bea\jdk130\bin\java" -hotspot -ms64m -mx64m -classpath.;.\lib\weblogic_sp.j
>
ar;.\lib\weblogic.jar -Dweblogic.Domain=myAdminDomain -Dweblogic.Name=myserv
er "
-Dbea.home=d:\bea""-Djava.security.policy==d:\bea\wlserver6.0/lib/weblogic.poli
cy" -Dweblogic.management.password= weblogic.Server
Exception in thread "main" java.lang.NoClassDefFoundError: weblogic/Server
goto finish
cd config\myAdminDomain
ENDLOCAL
[d:\bea\wlserver6.0\config\myadmindomain]javap weblogic.Server
Class 'weblogic.Server' not found

Virtualbox problem: modprobed_db: command not found[SOLVED]

I'm running arch in virtualbox.
and when I run # virtualbox, error:
"VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: libQtCore.so.4: cannot open shared object file: No such file or directory"
wiki write: "Note: You may need to update the kernel modules db in order to avoid 'no such file or directory' error when loading vboxdrv. Run: modprobed_db."
but result:
"# modprobed_db
bash: modprobed_db: command not found
Last edited by lqs (2012-07-27 09:00:44)

modprobed_db can be found in the AUR. It collects all modules which have ever been loaded on your system. It's very practical if you compile a custom kernel and only want to include the modules you need.
I think this doesn't solve your problem. Your system is missing the file /usr/lib/libQtCore.so.4 Do you have [testing] enabled? If so, do you also have [community-testing] enabled? I'll need more input to be able to help properly.

Get message that serial number is valid but product not found when trying to activate CS6.

Hi,
I need help with installing CS6 to a new computer. I have owned PS since CS and have upgraded through all of the versions. Do I have to download the old versions too now? I don't remember doing that on my new desktop last year. When I try to activate with the serial number it says the number is valid but the product is not found. I have tried my previous version numbers but they are invalid. There is a drop down to choose what product I am trying to activate but CS6 is not even listed. CS6 Extended is but that is not what I have. Can anyone help me with this?

you purchased cs6, not as an upgrade.
if that's correct, you do not need any previous versions installed and you should not be prompted for any previous version's serial number.
what exact product did you purchase and what product did you download?

Error:Required product not found

Hi,
When i click the edit in the interactive form component i encounter a message like
"Required Product not installed.Install SAP interactive form-livecycle designer to edit the forms."
How can i rectify this error?
i have installed adode livecycle designer 8.0 version separately..Do i have to install any other adobe components.?Is this a SAP licence issue?Is any integration component missing?
Helpful replies will be rewarded.
Regards,
Jinesh.

Hello,
No, Designer is included in the license.
You can install the LiveCycle Designer 7.1 which you can download on service.sap.com/swdc. Higher LiveCycle version are not supported.
Regards,
Francois

First EJB problem: HTTP 404 NOT FOUND

I was running the first EJB example(Coverter) in J2EE Tutorial. My HTTP port is 4848.
I can deploy the application at localhost:4848, and I can connect to http://localhost:4848/asadmin/
The context root for web client is /converter.
But when I try to connect http://localhost:4848/converter, It gave me HTTP 404 NOT FOUND error.
Why?

Now I know.
Admin Port is 4848. Http Port is 4421.

SUP sync problem: Category products not found on WSUS

Similar Messages

Maybe you are looking for