SUP - Update KB3000850 and other issues

Hello,
I manage a SCCM 2012 R2 Infrastructure.
I am trying to add the KB3000850 to my update package and I always get an error message.
I tried to resynchronize the SUP and still the same error.
Package:
　Success: The software updates were placed in the existing package:
Software updates downloaded from the internet
　Success: Update for Windows 8.1 for x64-based Systems (KB3000850)
　Error: Update for Windows 8.1 (KB3000850)
Errors
Failed to download content id 16836098. Error: There was an error downloading the software update. (12002)
Failed to download content id 16836099. Error: There was an error downloading the software update. (12002)
Language Selection:
English
Also,
- Some of the updates I deploy get stuck at 50% and the only option is to install the update manually...
- The update installation is very slow compare to a manual install
Have you already had those issues and how did you solve them ?
Thanks.

Hi,
The error 12002 means timeout.
Please check Patchdownloader.log to find more information.
There is a similar thread that the issue was related to proxy.
There was an error downloading the software update. (12002)
You could also check the Gerry's comments about this error in the blog below.
ConfigMgr 2012 / SCCM 2012 SP1 Step by Step Guide Part 16: Software Updates (Non-Microsoft)
Note: Microsoft provides third-party contact information to help you
find technical support. This contact information may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.
>>Some of the updates I deploy get stuck at 50%
You could check reports in the console and logs on the clients to find the reason.
http://technet.microsoft.com/en-us/library/hh427342.aspx#BKMK_SU_NAPLog
Best Regards,
Joyce
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

  • Elite Pro, CMSS-3D not working and other issues after driver update

    DElite Pro, CMSS-3D not working and other issues after driver update <font face="arial,helvetica,sans-serif" size="4">Elite Pro CMSS-3D control (on I/O console)no longer controls CMSS-3D.
    The only time it works is if the original drivers are installed from the installation CD.
    ANY other drivers stop the control on the Elite Pro I/O console from having any effect on CMSS-3D.
    Also at one time when I cotrolled volume, CMSS-3D(original drivers), EAX and Crystalizer from the Elite Pro I/O controls then I had on screen display of said control that was being moved(on I/O console).
    Now regardless of what drivers are installed, there?are no longer any on screen indicators.
    The indicators looked like the ones that show when using the remote controller.
    Anyone have any ideas?

    Hello friends, if any body have problem with "Creative Sound Blaster X-Fi series Driver 2.8.003" then you can download previews "Creative Sound Blaster X-Fi series Driver 2.8.0008" from above direct Links :
    http://rapidshare.com/files/252388832/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/25239047/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part02.rar
    http://rapidshare.com/files/252397989/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part03.rar
    http://rapidshare.com/files/252397990/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part04.rar
    http://rapidshare.com/files/25239799/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part05.rar
    http://rapidshare.com/files/25240785/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part06.rar
    http://rapidshare.com/files/25240787/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part07.rar
    http://rapidshare.com/files/252405003/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part08.rar
    http://rapidshare.com/files/252408540/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part09.rar
    http://rapidshare.com/files/252408542/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part0.rar
    http://rapidshare.com/files/2524409/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part.rar
    http://rapidshare.com/files/25244020/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part2.rar
    http://rapidshare.com/files/2524402/__Creative_Sound_Blaster_X-Fi_series_Driver_2.8.0008__.part3.rar
    http://rapidshare.com/files/25244022/[email protected]7.254.6.0

  • Apple - please announce some guidance as to when devices running Lion 10.7.2 will automatically update Pages (and other iWork) docs via iCloud so that they appear updated in iOS5 devices?

    Apple - please announce some guidance as to when devices running Lion 10.7.2 will automatically update Pages (and other iWork) docs via iCloud so that they appear updated in iOS5 devices?  

    Same problem here after update to 10.7.3 and I need to manually set the wireless. If I disable wireless and reable it again the wireless connects ok

  • I bought over a Mac Book Pro from a friend. I can't update iPhoto and other apps as it seems like these are tagged to the previous owner's account. Pls advise.

    I bought over a Mac Book Pro from a friend. I can't update iPhoto and other apps as it seems like these are tagged to the previous owner's account. It basically requires me to sign in to my fren's account which is absurb! Because iphoto comes with mac isn't it?

    Contact your "friend." Have him set up the MBP for your with your own account, settings and passwords. You are not running IOS 5.1. That is for iPhone and iPad users. What OS are you running? Did he give you the OS installer disks?

  • Trouble with 4G and other issues after latest update.

    To whom it may concern,
    After the recent update I have been having the following problems:
    I lose 4G in many places where I was receiving great 4G access before.
    Battery life seems to have suffered a little, this may be due to 4G hunting.
    New software applications were installed like the Caller ID app, and flipboard. I hate when software is installed without my authorization and then cannot be removed. What year do we live in Verizon?
    I have heard on this and other forums that a factory reset does not resolve these issues but Verizon claims that it is the final resolution. We should not have to do a factory reset after an update. I understand that there are many variables to consider with all the apps out there but that is what testing is for. That is why we wait for updates from Verizon.
    I will attempt a factory reset to resolve my issues. If this does not resolve the issues I will be contacting Verizon about a refund for the 4G access that I am now being denied.
    Thanks
    AlphaDanger

        Hey AlphaDanger!
    The year is 2013 and I read you loud and clear on wanting to make sure your software operates smoothly on your GS3. So, let's make that happen.
    Right off the bat, thank you for the details as well as considering a hard reset. But, I'd like to make another recommendation if you have yet to do it. Instead, I'd suggest wiping the cache partition. To do this:
    1.) Power off your phone.
    2.) Simultaneously hold the volume up key, home key, and power key.
    3.) When it vibrates, release only the power key.
    4.) When you see the Android recovery menu, wipe cache partition using the volume down toggle and power key to select.
    5.) Then select "Reboot System Now".
    Please let us know how this goes.
    EvanO_VZW
    Follow us on Twitter @VZWSupport

  • Failed Hardware Scan and other issues E440

    Hi all,
    This is probably more rant than anything, but I wanted to give a heads up to others too.
    I have a ThinkPad E440 that is a year old. From the very first time I turned it on, there have been issues. The first hardware scan (via Lenovo Solution Center - LSC) showed a warning for the Intel Dual Band Wireless-AC 7260 Local Connection Test. There were also tons of System Events that always show up in the "Configuration History" part of the LSC. You can look at the calendar and tell exactly which days I used the computer because there will be System Events generated each day. Things like app crashes and failed drivers.
    In July 2014, I got the first warning for the 16 GB SSD - the SMART Short Self-Test. By February this year it showed as failed for each hardware scan (these were initially set up to run monthly).
    Also the whole time I've had it the touch screen would just stop working at some point and I would have to reboot to get it working again.
    I finally called Lenovo on March 30th, before my warranty expired. When I called that time, I didn't realize the hard drive failure was the SSD. So they sent me a new 500 GB drive. I also added the other things into the case when I talked to them. For the wireless issue they suggested making sure the driver was up to date. I did this and let them know when I called back that it was up to date and still having the warning. So I called them to tell them to tell them about the wireless and also that I realized it was the SSD having the failure, not the main drive. The first case had already been closed even though none of the other items were addressed.
    So they opened another case (this is #2). They said to mail them the laptop since the wireless issue would probably be on the board and it wasn't something I could fix myself. They sent a box with a prepaid overnight shipping label. I was very sick for a few days so I sent it back to them on April 10th (a Friday). Via UPS I saw it was delivered on Saturday. Work was performed on it Monday, April 13th and sent back to me that very day. I received it on April 14th. This part of the service has been excellent - very fast response.
    Being in IT, I included a letter with the laptop that outlined the issues that should have been in the case. I also printed the hardware scans and what the system events looked like.
    When I got the laptop back, the sheet inside said they had replaced the Speaker because of Distorted Sound. This was not even on the list even though I had noticed it. I didn't even power up the laptop before calling them again - yes, I was furious! Plus our power was out...
    So this was noon on the 14th. They opened case #3 and sent me ANOTHER BOX so I could send it back.
    After our power came back on the 15th, I powered up my laptop. I opened the browser (I have it set to restore the previous session) and there was a sexually explicit video on YouTube. I opened the other browser and there was a different video on YouTube. So this person was watching YouTube instead of fixing my laptop. I looked through both browser histories and there was quite a bit of activity while my laptop was at the repair center... I ran the hardware scan - still failed and a warning for the wireless. They really hadn't done anything.
    I also found two pictures of the repair person in the recycle bin...
    So I called back. I was LIVID! They opened another case (this is #4). And sent me ANOTHER BOX. I finally learned the other day that once a case is opened, it cannot be edited or added to at all. Instead, they close the other case and open a new one. I guess their turnaround time for closing cases is excellent! I've never seen a system like that - and I've used a lot of them.
    I got a really nice, patient fellow on the line. He took all my info (again). I emailed him the pictures, screen captures of the YouTube videos, the letter I had sent - everything. He entered as much into the new case as he could - he talked to one of the supervisors to make sure he did it right. Somehow he flagged it so that the laptop would get more attention (time) at the repair facility. He also opened a separate case (an escalation ticket?) for a supervisor to call me regarding the person's conduct at the repair facility. He said they would call me that day. (It's now the 25th and I've never heard from anyone)
    So, he sent me ANOTHER BOX. I've built up quite a stack of them.
    Our power was out AGAIN from the 17th through the 19th (don't get me started).
    I noticed a hardware scan had now gotten a failure on the main hard drive. So I called them on the 21st to add this to the case before sending the laptop back. The girl said they can't add anything to an existing case or edit it at all once it's opened. She would have to open a new case and SEND ME ANOTHER BOX. I told her to forget it because I was ready to send it in and didn't want to wait for another box. I also asked for a status on that "escalation case" where the supervisor was supposed to call me. In order to do this she, yes, wait for it, had to open ANOTHER CASE!! So they would know I wanted a status. I'm completely dumbfounded.
    So I sent it back on the 21st. This time I practically wiped it. I had already removed all my files the last time, but I had left my bookmarks and browser history intact.  I set up a guest logon with admin privileges. I updated my letter and printed off more stuff to include with the box. On one sheet I had only the case number, the serial number and machine type. On another sheet I had "DO NOT SEPARATE THIS PAPERWORK FROM THE LAPTOP" and the case number. I put this sheet on top (The guy on the 15th said my letter and stuff may have gotten separated from the laptop once it was delivered to the repair facility). I used a ton of staples so it would all stay together. I included in my letter the failure on the main hard drive and asked if they could look at it. I wrote about having to open a new case if I wanted to include it.
    They received it on the 22nd. A nice gentleman from the repair facility called me that day asking about the password. that. was. written. on the sheet they have you fill out. I told him what happened last time and also mentioned the hard drive failure and asked if he could look into it. He said they would.
    I received my laptop back yesterday morning.The sheet that came with it said they had "replaced the following parts to complete the repair of your laptop."
    Part Description                                           Symptom
    IMAGE                                                             Replaced due to engineering change
    System board                                                 Network card error
    Hard disk drive                                                Network card error
    ECA-WIRELESS                                            <no symptom listed>
    There was also a sheet saying they had installed a factory preload of software and I needed to install Lenovo and Windows updates.
    When I booted it up, the first thing I noticed, in the lower right corner was:
    Windows 8.1
    SecureBoot isn’t configured correctly
    Build 9600
    I ran a hardware scan. Well, I tried. It stopped part way through and said it finished successfully but most of the tasks showed up as cancelled. I tried to run it again - issues - rebooting ensued. It said the LSC wasn’t available and that I should try again or reboot.
    Tried several times. Then got what I guess is the new BSOD - kinder, gentler:
    Your PC ran into a problem and needs to restart. We're just
    collecting some error info, and then we'll restart for you. (xx% complete)
    If you'd like to know more, you can search online later for this error: DRIVER_CORRUPTED_EXPOOL
    Even though the LSC said my Lenovo files were all up to date, I ran the Update. And first I had to download a new version of Update. Then I downloaded all of the Lenovo updates and installed them (there were quite a few). The BIOS update failed. While I was doing the Lenovo downloads, I got a light blue screen but no text (I was out of the room so I'm not sure what happened). Did CTRL-ALT-DEL and it shows only IE and Task Manager as applications that are running. Could not “Switch to” IE. Hitting window key to go to start didn't do anything. So I had to restart.
    By 3pm yesterday there were 34 system events in the configuration history.
    I ran the hardware scan again after I updated the Lenovo files, and you guessed it! Failure on the SSD (SMART Short Self-Test) and warning on the wireless. Nothing had changed. Except hardware scan is acting different than it did before I sent in the laptop for repairs. When it finishes, it instantly closes and just shows 100% complete. When I click on "see last results" it shows a screen called
    Log Information,
    Canceled 04/24/2015 n:nn pm 
    You have not done a hardware test on your computer
    And the calendar in LSC only shows the very first hardware scan I did on Friday. Even the hardware scan screen shows the date and time of the last scan. It also shows the error code. In order to see exactly what is failing, I have to sit there and watch it very closely and snap a picture of the screen as soon as the error (or warning) shows up.
    When I would try to run Windows update, it would hang up PC Settings. I couldn't even kill it using task manager because it didn't show up as a task. During this, I got a flag saying the firewall wasn't turned on. I tried to turn it on, but clicking on Turn on Windows Firewall didn't do anything. I tried to setup my Microsoft account but that just hung too.
    I ended up running Windows Update FOUR TIMES to get all the updates installed. Every time I ran it, it said "Done!" and I would run it again and more would show up. The last time was this morning.
    At some point, the error about SecureBoot went away.
    Then, I created a bootable BIOS update disk. Following the ReadMe instructions, I went through ThinkPad Setup and verified several values. Of note:
    Secure Boot was DISABLED. According to the ReadMe file, this should be ENABLED in Windows 8.1. I enabled it.
    Under Startup/Boot, according to the ReadMe that came with the BIOS update, UEFI/Legacy Boot is supposed to be set at UEFI Only for Windows 8.1. Mine was set to "Both". I changed it.
    In Startup, OS Optimized Defaults was DISABLED, even though it says right there (and in the BIOS update ReadMe) it should be ENABLED to meet Microsoft Windows 8 Certification Requirement.
    After these updates, I flashed the new BIOS.
    Then, I ran hardware scan again...
    Now I have TWO failures on the SSD: Random Seek Test and SMART Short Self-Test. Great.
    In the Event Viewer (that I recently discovered), it says my disk has a bad block. It just says The device, \Device\Harddisk\DR1, has a bad block. I assume this is the SSD...
    There are 867 events in the event viewer - Critical, Error, and Warning...
    Fifty-two of these are from October 7, 2013 - before my little laptop was a glimmer.
    The rest are from when Lenovo had it and yesterday and today.
    64 of them are the disk error.
    341 are from DeviceSetupManager. 65 of those are from failed driver installs. 69 are for not being able to establish a connection to the windows update service. 64 are from not being able to establish a connection to the Windows Metadata and Internet Services (WMIS).
    3 times it's rebooted without cleanly shutting down
    60 of them are from Service Control Manager and say The TDKLIB service failed to start due to the following error: The system cannot find the file specified.
    One of them says {Registry Hive Recovered} Registry hive (file): '\??\C:\Users\Default\NTUSER.DAT' was corrupted and it has been recovered. Some data might have been lost.
    16 are warnings that various processors in Group 0 are being limited by system firmware.
    12 say the certificate for local system with thumbprint <bunch of hex numbers> is about to expire or already expired.
    108 are warnings for failure to load the driver \Driver\WUDFRd for various devices
    16 are application errors
    One is for the computer rebooting from a "bug check"
    15 are for name resolutions timing out after none of the configured DNS servers responded.
    10 are for SecureBoot being disabled.
    14 for services terminating unexpectedly
    15 are for WLAN Extensibility Module has stopped
    61 are for applications not being able to be restarted because the application SID does not match Conductor SID
    12 are for activation of CLSID timing out waiting for the service wuauserv to stop
    So, I'll call them on Monday and open. a. new. case (#5?) - but really 7. And get A NEW BOX.
    I'll keep you updated!

    Hi amycdero and welcome to the HP Forum,
    I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
    In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
    This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
    I hope this information is helpful. Please let me know.
    Thank you,
    I worked on behalf of HP.

  • Twist charm swipes not working and other issues

    Hi all,
    I just got a new Twist a few days ago and am having some issues with it.  I got it on line from Staples who have a very limited return policy so I need to get these problems resolved quickly or will have to return it in a few days.  I really like it a lot and would hate to return it and deal with the replacement, double charge on my CC until they get the defective Twist and refund the bucks,  not to mention the shipping hassles.
    I've installed all updates including the Lenovo updates, updated the Bios, did a factory refresh and went through the update process all over again and also calibrated the screen.
    So the problems I'm seeing are the swipes from top to close an app, left to view open apps, and right for the charms will intermittently stop working but you can still tap on apps to open them and slide the app screen left \ right. 
    The other issue is that occasionally the app screen will shrink and expand or open an app without being touched, I would have it on a stand in tablet mode and watch it expand \ contract, and suddenly bring up an app like Remote Desktop. I contacted Lenovo support they said it was a hardware issue and recommended returning it but I'm reluctant to do this and hope there's a solution for it.
    I did notice was that moving to portrait mode would usually work to bring back the swipe functionality.  Digging into it a bit more, I think I found the root cause, when it is in tablet mode with the keyboard folded back, the keyboard isn’t getting fully disabled, watching it closely I noticed that a cursor would sometimes appear \ disappear momentarily.
    Any thoughts or advice would be GREATLY appreciated!!

    Chris Ibsen wrote:
    I still have access to the folder, as I still have the external drive.
    okay, let's make really sure it is the entire iTunes folder. a typical one looks like this on the inside
    the red arrow points to the heart of your iTunes library - the iTunes library file, the iTunes database. you will want to treat this file as the apple of your eye !
    anyhoo, if indeed the entire iTunes folder is on the external, simply drag it from there to <MacintoshHD>/users/<yourname>/music on the new Mac.
    since a folder by the same name is already in that location, the finder will tell you so and ask you if you want to "replace it with the one you're moving". confirm that you want that.
    when the copying has finished, fire up iTunes and you should be taken to the exact same library you were used to from your old Mac.
    finally, go iTunes > preferences > advanced and check that +iTunes media folder location+ is set correctly - it should point to the iTunes folder on your new Mac's startup disk. if it doesn't, change it accordingly.
    please post back with results !
    JGG

  • My trash can shows empty and other issues with it...

    Ok basically, if i delete anything on my mac it should go to my trash can right?
    Well i have a few problems with that as follows:
    1. Everytime i delete something or move something to the trash it asks me to enter my password everytime, then deletes it, this never used to happen and now all of a sudden it does, this started just before the latest lion update and ive tried everything i know to stop it doing it but failed.
    2. When i do delete something, the trash can shows empty on my desktop, and when i open the trash there is nothing inside, so im not able to restore anything if required, so basically if i move anything to trash it just gets permanently deleted instead of storing it in trash first, again this started just before the latest lion update.
    I was hoping the update would fix this issue but didnt change it what so ever, i have also tried repairing disk permissions and still no change.
    Any ideas on what i can do to fix these problems? Im still new to mac so i dont know all the ins and outs, but any help on this would be appreciated.
    Cheers all,
    Carl

    Boot from your recovery partition by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
    When the recovery desktop appears, select Utilities ▹ Terminal from the menu bar.
    In the Terminal window, enter “resetpassword” (without the quotes) and press return. A Reset Password window opens.
    Select your boot volume if not already selected.
    Select your username from the menu labeled Select the user account if not already selected.
    Under Reset Home Directory Permissions and ACLs, click the Reset button.
    Select  ▹ Restart from the menu bar.

  • RV042G Log Email and other issues

    The RV042G manual said to use this site for support so here goes.  After owning and operating the RV082 for many years, I recently upgraded to the RV042G V01.  Overall the RV042G hardware appears to function pretty good.  The RV042G has faster throughput, but it is slightly slower in command/control response and boot than the RV082.  I have now owned the RV042G about two days and have found a number of issues.  Specifically, emailing logs doesn't work. 
    - Emailing logs does not work.  RV042G does not appear to handle any type of connection authentication, it does not have a place for the senders user name or password.  I have tried SMTP servers that require no authentication and ones that do, none of them work.  RV082 worked fine with the Time Warner Cable (TWC) SMTP server, RV042G does not.  Additionally, there is NO output in the logs to show a failure.  So TWO bugs here.  I have checked settings to ensure no blocking rules, have rebooted, and even did a factory default with no luck and absolutely no mention in the logs anywhere of failure to send.
    Email is my primary issue, any suggestions on getting this working would be appreciated.  I've also identified a number of other issues as well and included them here to avoid multiple posts.  These are:
    - Port 0 apparently responds to interrogation and shows CLOSED (not STEALTH per grc.com).  This was NOT the case for the RV082 and is a potential security vulnerability as it cannot be redirected.
    - Port 1 is CLOSED and apparently responds to interrogation.  This was NOT the case for the RV082.  Normally I would be good on the RV082.  I could redirect any OPEN or CLOSED ports to the bit bucket (192.168.1.254 for instance).  BUT, the RV042G Port Forwarding is NOT sending things to the bit bucket and instead decides to OVERRIDE the forwarding and respond to queries.  So there are TWO bugs here.  This is a potential security vulnerability.
    - The ALL Logs tab shows nothing, but sub tabs do until AFTER you hit the clear button, then it works as expected. This happens every time you open the logs.  Another poster identified this problem so this is confirmation of that issue.  Also, once the dialog box for the log has closed, it will not open again until leaving the page and returning. 
    - Authentication failures will show up in the System Log but not in the Access Log?
    - HTTPS html interface works fine in Firefox.  However, turn it off and use just HTTP and there is a problem.  Can't see the forms and buttons, can only see the background image.  This isn't as much of a problem as I can just use HTTPS, however, with the RV082 when HTTPS was activated it would open the remote management portal regardless of whether the button was clicked or not. So really a non-issue but a bug none the less.
    - RV082 could send 500 log events, RV042 can only send 100. Again, not a bug but a reduction in capability over the older RV082.
    One last thing, your hardware version control numbers and firmware download page are confusing for the RV042G V01.  Found this when I checked if there was a newer version of the firmware than what the RV042G shipped with.  Here is what the firmware update page shows:
      "Cisco RV042G Dual Gigabit WAN VPN Router"
         "Firmware Release 4.2.1.02 - RV042, RV082, RV016 firmware 4.2.1.02-tm (V3 hardware required)". 
    The problem is that you reset the hardware version in the RV042G (V01).  Just seems probable that someone will download the firmware for the RV042 V01 and try to put it on the RV042G V01. 
    I like the RV042G overall and will wait for updates for these issues (email logs would be nice sooner rather than later as this is an advertised feature).  The RV082 was a great router for a long time ONCE most of the bugs were fixed, hoping the RV042G will be the same.

    Guess I spoke too soon.  If Remote Management = Disable and HTTPS = Enable, it will OPEN external access to port 443.  So have to use an access rule to kill it off.  Can STEALTH Port 1 as well with an access rule but have to block all traffic there.  Cannot block Port 0 (make it STEALTH) with an access rule and this needs to be fixed in firmware.
    So port forwarding does work but not when sent to the bit bucket, have to use an Access Rule instead.  (You can see this by doing the following: turn off HTTPS and remote management and look at port 443 from the outside of the firewall.  No response at all.  Now enable HTTPS and keep Remote Management disabled and forward port 443 to an unused internal IP address.  The port still shows up as OPEN but won't connect.  Again, the RV082 did not exhibit this behavoir and would simply not provide any response to an external query if forwarded to an unused internal IP address.)
    For clarity, I have the RV042G V01 with Firmware Version :   v4.2.1.02 (Jan 18 2012 14:10:55). 

  • Scan app not opening and other issues

    Hi,
    Let me start by saying thank you for your assistance. I have a regular-old 5514 photosmart airprint printer, and it is going crazy. It is just about to be two years old. My computer is a MacBook Pro on 10.9.1 (also two years old). The printer and computer are connected by my Comcast blast wifi. All of my paper and ink are HP. So here's the problem, first it won't print my pictures, not on glossy or regular-it just makes the noise like it is printing but the pages are blank (this never used to be a issue); second, the scan app won't even open on my computer, it just gives me a long page of coded errors or just automatically closes; finally, it often is printing streaky if it does print. There are no updates that I can find on for the app on my computer, and I have zone 2 ink, (I will buy more if this thing starts working), and I have run all the tests and they are completely fine as if nothing is wrong. Please help! If you need additional details I can provide that info.
    Thanks,
    amycdero

    Hi amycdero and welcome to the HP Forum,
    I understand that you are having scanning and printing issues after upgrading to Mavericks OS X v10.9.1. I will try my best to help you resolve this issue.
    In this document for Mac OS X: Scanning Software Does Not Open or Stops Responding are steps the may help you with your scanning issue.
    This document for Fixing Ink Streaks, Faded Prints, and Other Common Print Quality Problems should help with the streaking printing issue.
    I hope this information is helpful. Please let me know.
    Thank you,
    I worked on behalf of HP.

  • Printing in OsX 10.6.x and other issues

    I just updated from a trusty G5 running OSX 10.4.11 to a 2010 Intel iMac running OSX 10.6.8 and can't for the life of me get my Epson 3800 and 595 printers to work. I've downloaded new drivers and also resorted to a clean install but no luck. The other issue is that when I run permission repairs in Disk Utility I get extensive repairs only to have the same thing happen again the next time I run the utility. Suggestions please!

    Thanks for the permissions info. It' a bit disconcerting that in Snow Leopard the Disk Utility just seems to continue repairing things that were supposedly fixed the last time I ran it. In Tiger a second go with Disk Utility would usually come up clean.
    Still having printing problems. Software update supposedly installed new drivers but neither the Epson 595 or 3800 will print. The error message in the driver window is:
    Error:/System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMana ger failed
    Not sure, but it sounds like something in the OS dropped the ball.
    Any input appreciated.

  • Loss of audio after upgrade os x 10.7.5, reset PRAM, SMS, updated software and other recommendations i could find. Master volume sliders inactive in Audio Midi section. Can see sound bar responding it input on line in but is not being internally routed.

    Recently upgrade to OS x 10.7.5 resulted in loss of what appears to be internal communication of line in audio, and output. Have tired several remedies including resetting PRAM, SMS, updating all software, multiple Sound and Audio Midi applications adjustments to no avail. Also no audio is recognized on USB mixing board I tried as well, though Audio USB Codec was displayed. THe master volume sliders and other options are greyed out on Audio Midi application whn I try to troubleshoot that. Nothing external will play through computer speakers, but internal sounds and iTunes play normally.I made sure the audio sampling rates were default. Software issue or soundcard/hardware failure.?..Pullin my hair out!

    Might be corrupted sound preferences ...
    Open the Finder. From the Finder menu bar click Go > Go to Folder
    Type or copy paste the following;
    /Library/Preferences/Audio
    Click Go then move both .plist files from the Audio folder to the Trash.
    com.apple.audioDeviceSettings.pllist
    com.apple.audio.SystemSettings.plist
    Restart your Mac. See if that made a difference ...

  • Power Mac G4 (sawtooth) AGP - Firmware and other issues

    Hello,
    So I was given an older Power Mac G4 AGP which I've been using while my Power Book G4 gets a logic board replacement but I've been having some issues with the AGP unit. How do you check to see what version of the firmware you have? I read a firmware update but it requires OS 9 to launch and I don't know if I need this or not. The other issue has been when I tried to run Firefox after successfully installing it. Firefox doesn't launch, it just opens and then closes. When I use Safari, the browser will work for about a few minutes but then it will freeze and I need to force quit it. I am running 10.4.11 and I was thinking of installing 10.5.6 but I'm not sure if this is possible with the Sawtooth. Do I need to upgrade the processor? Any advice or help is appreciated.

    Hi, veesh678 -
    Early models of the G4 (AGP) models came with OS 8.6; later models came with an installer for a model-specific version of OS 9.0.4. The latter disk will have a blue-gray label, be named "Power Mac G4" with a subtitle "Software Install", and has a part number of 691-2657-A (the part number will be in fine print on the right-hand side of the label).
    Non-current firmware will not preclude the machine from booting to that CD; a retail OS 9.0.4 Install CD (white label, gold 9, no model named) probably will not work, although a retail OS 9.1 or 9.2.1 Install CD should work fine.
    The current firmware version for the G4 (AGP) model is v. 4.2.8, which can be downloaded from this article -
    Article #120068 - G4 Firmware Update 4.2.8
    Note that to install that version the machine must be booted to OS 9.1 or OS 9.2.x from its hard drive, and the firmware update must be run from the same hard drive.
    Before installing firmware update v. 4.2.8, download and run DIMM First Aid (it's a free download) to verify the compliance of the RAM in the machine.

  • WRT55AG - Denial Of Service / security hole, and other issues

    Im using a V2 of the WRT55AG using 1.79 firmware.
    I suffered many perplexing issues when connected directly to my cable modem.
    1 It would lock up and no data transversed it
    2 Its web interface would no longer exist
    3 Some types of data would be blocked
    4 It would stop doing DHCP
    5 Ping times to it from the LAN side would increase in 1 minute intervals for hours or until power cycled
    6 Data rates would slow randomly.
    These problems would occur separately and in combinations. They would occur randomly but some issues would occur daily.
    Left alone the router would 100% lock up in a matter of days. This occurred 100% of the time.
    Rebooting was a daily and sometimes hourly ritual.
    After reading in many forums of the known issues with this router I purchased a BEFSR41 as replacement.
    ALL of my problem were gone. This of course isolated the issues I was having to the WRT55AG.
    I then hooked up the WRT55AG _after_ the BEFSR41.
    The problems with the WRT55AG disappeared. Completely. It suddenly worked for weeks perfectly.
    I then tried setting the BEFSR41's DMZ to the IP of the WRT55AG exposing the WRT55AG to the net directly.
    The issues returned.
    So the WRT55AG is crashing and suffering from various problems because of some hostile internet packets. Effectively it suffers major security issues and a denial of service from something that is present from the internet. I did not isolate what ports+packets were causing the DOS condition.
    Im sure the WRT55AG has some code that is vulnerable to attack because it crashes when exposed to the net. This is a serious issue.
    This is a sad state of affairs. I paid good money for the router. Its too late to get my money back. I would settle for a 802.11A WAP.
    I want a *FIX* for the obvious security hole that could expose anyone on the LAN side of the wrt55AG router to attack if the router/firewall is compromised. I want my WRT55AG to work as intended or at least as well as the BEFSR41 I own.
    I also feel if the source code was still open, then these problems would not exist. At the very least, some other 3rd party version of firmware would be available that would work in the router and any issue would get prompt attention and a quick solution from a open source team. The decision by Linksys to move away from open source firmware will erode the quality of the brand by making products less reliable.
    WHEN will a new version of the firmware be available for the WRT55AG ?
    If not how do I go about returning a well documented defectively engineered product for a product that works ?

    I would like to see a update to fix the various issues with this router. When will this be available ?
    -OR-
    If this product is considered End Of Life, I would like to get confirmation that no future firmware update will occur.
    As this product was defective out of the box and has never been fixed, I would like a replacement product please. My serial number is # MDJ106802225
    Message Edited by Xymox on 08-13-2008 11:28 AM

  • Petition to release updates faster, and fix issues

    https://www.change.org/petitions/sony-release-android-updates-much-faster-and-fix-issues
    Share this petition with anyone that owns a sony smartphone or tablet, because i believe this effects everyone.
    Maybe this petition will proof sony that their poor sales are due them slacking, making them release updates much faster in future.
    it also helps to tweat this petition on twitter to following hashtags #xperia #tablet #mobile #sony
    i think sony makes awesome products, i would defiantly consider a xperia z in future, their only one problem sony is never up to date, and have lot issues bugs that can ****** anyone of easy.
    i don't think its fair if jelly bean hits late april may for example, and android 5.0 gets released , and other brands like acer samsung asus  etc push out updates much faster then sony does.
    sony is by far the slowest updating their stuff, correct me if i'm wrong, anyway even if wrong they still way to slow, especialy considering the bugs surrounding their devices like the xperia tablet s or tablet s1
    Solved!
    Go to Solution.

    Have anyone tried sending an email to the Xperia Blog (http://www.xperiablog.net) regarding the petition and asking them to write something about this?
    It wouild generate some more buzz and perhaps a few more signatures.
    UPDATE: I've sent an email to the Xperia blog asking them to write about the petition.

Maybe you are looking for

  • Changing iTunes accounts

    Several years ago I sold an iMac, deleting personal files but leaving some programs and my iTunes library. The current owner is unable to access iTunes store since it is in my name. My ISP used in that account has changed so I can't access it either.

  • KT4 Ultra - SCSI boot problem

    Hi, I have installed a Tekram DC390U2W LVD SCSI adapter on my KT4 Ultra. My problem is that I cannot select any of the five connected SCSI disks as a boot device in the BIOS (BBS-n), nor can I select 'Legacy SCSI' as a boot device, they simply don't

  • Web Dynpro and Abobe Flex

    Hi Folks, I've seen a couple of responses to questions about the mixing of Web Dynpro and Adobe Flex technologies... This thread mentions a "Flex Client" which is reportedly able to render existing Web Dynpro apps in Flex: WebDynPro ABAP in adobe fle

  • How do I erase in Adobe draw

    how to erase in Adobe draw

  • Unable to set presentation variable to prompt default.

    i am tying to apply prompt default value as some presentation variable. as i want to set depending on the value selected by Same prompt.please help me. or else help me to write sql statement with presentation variable(of other prompt) to set default.