Super BOM doesn't generate while run MRP from Sales Order

Hi all,
I am trying to make a Super BOM
where i have a material x as finished product, and i have 2 material as component for that finish product ( A and B )
i already create characteristic and assign it to the class 300, i also have created the configuration profile for the finish goods material and the object dependencies selection condition type for those material component in the BOM Item,
i also have check using simulation CU50 and the BOM is ok
But when i try to create Sales Order, entry the characteristic and run the MRP using MD02, the Super BOM doesn't explode
Is there anyone who can help to solve this problem??
Regards,
Marufat

Hi,
Does any planned order generated for the finished material? or you are talking about the components explosion?
If all the answer is Yes, then check and maintain the 2 collective requirement in MRP4 tab for the components material master.
And reprocess the MRP and check.
Thanks
Hrishi

Similar Messages

Using MD50 to run MRP for Sale Order

Dear all,
I have some problem when using MD50 with Mill Product Industry.
When SAP system not activate Mill Product yet. I used transaction code MD50 to run MRP for Sale Order, the system have generated planned order for multilevel. But when SAP system have activated Mill Product, I used transaction code MD50 to run MRP for Sale Order, the system only generate planned order for single level. I think that we have to configure something based on Mill Product Industry. So can you help me for this
Thanks, Regards

Hi,
Check with following links which may help you resolve your issue :
http://www.sap.com/sme/whysap/industries/millproducts/index.epx
http://help.sap.com/saphelp_di471/helpdata/en/4e/1796374b088e5ce10000009b38f8cf/frameset.htm
http://help.sap.com/content/documentation/industry/docu_is_mill.htm
Regards,
Tejas

Budget error while creating delivery from sales order

hi Gurus,
System is throwing error PB603 "Item 004 WBS element ABC-XXX budget exceeded" while creating delivery from sales order.
I am picking material from unrestricted plant stock (not in project stock).
I am also confused as sales order has 3 line items & error shows Item 004 !

Hi Kuldeep,
Check this note,
Note 159387 - Message BP603: incorrect line item is displayed
Its valid only till 4.6. Might give you some idea but.
Regards,
Gokul

Error while loading data from sales order header via LO-Cockpit extraction

Hi Guys
I activated sales order header d/source 2lis_11_vhdr using 3x funtionality ontop of BI 7.0 dataflow. While creating infocube I am getting an error saying that " Infoobject 0RATE_TYPE is onl allowed as an attribute (not in infoprovider)"
Also while creating the same cube I am not able to move UNIT objects to UNIT dimension (as it dont allow me to drag and drop)
Can anyone please advise me why I am not able to activate cube based on above mentioned error.
Thanks in advance.
regards

Hi,
To be able to load transaction data for 2010, you should have the master data for that in the time dimension. For this, you need to go to BPC admin and add the dimension members in the time dimension manually.
Alternatively, you can have a process to import master data from BI system also. You can do some more research on this. Please refer to the below link from help.sap:
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/46/fcc2ef34ee439aaa56a4f6ba001e4d/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/e0/532af2d0804218a59157136bb63a98/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/73/0f917879fd416099d04fb4c49889e0/content.htm
http://help.sap.com/saphelp_bpc75_nw/helpdata/en/88/e16046853041b391314a91bfe3618b/content.htm
Hope this helps.

No planned order created when run MRP for Sale Order

As I have told on the subject. My problem is system does not generate planned order for components in BOM
Some more information is: requirement class in SO is 043
I have choose "2" in tab MRP 4 for individual/collective and all component and finish product have MRP type is PD and Strategy is 20 - make to order
Please help me to solve this
Thanks

Hi Hoai Vu,
Please check in OPPQ plant parameters in SPRO weather you maintained for the plant conversions of planned order to production order.
SPRO-> Production> material requirement planning> plant parameters--> carry out plant parameters or over all maintenance of plant parameters (OPPQ)
Then check the for the material did you maintained the work scheduling view or not.
I hope helps you any queries please revert me back.
Regards,
Madhu.G

User exit while creating delivery from sales order

Hi Guys ,
Is there any user exit in sales order which triggers when we try to DELIVER(from the menu bar) .
My requirement is to not include some line items(base on some condition) before they are included in the delivery .
Thnx in advance .
Anil

Hi Naimesh ,
Thnx for your reply.
I'm not sure of the functionality in VOFM .Can u please tell me how can i acheive my current functionality as explained above in my question .
I'll tell u my requirement .
When creating delivery , I have to check for some condition and depending upon this condition , the line items must not be included in the delivery .
I have acheived this by BADI LE_SHLP_DELIVERY~SAVE_DOCUMENT_PREPARE.
if suppose any line items gets deleted in the delivery(based upon my condition) , and then if I look at the status of the slaes order(VA03) , it shows partially confirmed at the header level and the item which is rejected(in delivery) shows OPEN .
Can u tell me how to update the status of the sales order header and item level (if any item is deleted) during creation of delivery .
Thnx .
Anil

Restrict transfer of requirments from Sales Order to MRP.

Hi Friends,
I have a requirement where in I have to stop/restrict transfer of requirements from Sales order line item to MRP.
Generally, If the material in Sales order is for Internal production then the Planned order it triggered in MRP and If the material is Externally Procured then a Purchase Req is triggered in MRP. The MRP run is carried out using Transaction code - MD03
Is there any technical enhancement where I can restrict the transfer of requirements to MRP from Sales order.
I know I can control it functionally by changing the schedule line category, But We need a technical development to do this as the user would not every time go to Sales order change and then change the schedule line Category.
Please Advise.
Thanks & Regards
Nayan Shah

Hi Nayan,
Please try user exits EXIT_SAPLMDR2_001/2/3 if it helps.
Regards,
Gaurav

Validation while running MRP

Hello Experts,
Currently while running MRP, system has the provision of taking material which are in scrap stock, We want to put a validation so that material of scrap location cannot be used while MRP run .
Please suggest.
Regards,
Ankur

You need to exclude the scrap storage location from MRP through IMG tcode S_ALR_87006263
Also for all the materials you need to change the MRP indicator = 1 in MMSC for that storage location. You can do it in a mass way using tcode MM17.

MRP type "VB" components generated dependent reqt. after MRP by sales order

Good morning to all SAP gurus
        I hav scenario for mech. industry where we r going to implement MRP run , having FERT which is MTO scenario and " PD" MRP type.and its BOM components having MRP type "VB" with no strategy type. At MRP run after creating sales order system generated purchase requisition for components(ROH) depends on sales order requirements along with reorder point PR. So please help me system shouldn't generate PR depends on sales order requirements should create as per reorder point PR only.
       EX.   To manu. 1 nos of FERT (PD) required 1 nos of ROH (VB) . we r creating sales order of 10 nos. , reorder pt is 11 and
stock is 15. after mrp run system generated PR for 10 nos which is dependent for sales order.
       Pls elaborate regarding above scenario. Thanks in advance.
Regards
siva

Dear
Practically speakig , system should generate special stock PR as you are dealing with MTO sales order and MRP should plan the depedent requirement accordingly based on the MRP4 -Indiviaul and Collective Indicator -1 .
But , if you do not want to consider it as special stock , then you need to assing MRP4 Individual and Collective Indicator -2 and run MRP MD02-2,1,1,3,3 .
In you case , you have already stock 15 pc and ROP -10 , so system will not genreate any PR because , it will fullfill the requurement ( 10 PC FERT -10 ROH) .Once the stock fall behind 10 , then it will trigger PR .
Hope this is clear
Regards
JH

HT1222 hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package "mzps6175750011235388779.pkg"

hi i have a apple imac 27 2009 and i have purchased mountain lion but near the end it says An error occurred while running scripts from the package “mzps6175750011235388779.pkg”
can you please advise me what should i do to fix this

Some ideas.
https://discussions.apple.com/message/20034600#20034600

FRM-92101 error while running report from form

HI All,
I am getting the form error FRM-92101 while running report from form menu.My code is given below:
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
BEGIN
repid := FIND_REPORT_OBJECT('REPORT47');
v_rep := RUN_REPORT_OBJECT(repid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
IF rep_status = 'FINISHED' THEN
WEB.SHOW_DOCUMENT('http://192.168.0.21:8889/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server=repserver90','_blank');
ELSE
message('Error when running report');
END IF;
Clear_message;
END;
Clear_message;
--Arif

hi Arif
Please see this note on MOS/Metalink for some common causes of this error:
Known Causes of FRM-92101 Error In Forms [ID 604633.1]
thanks,
AMN

Run MRP for production order/maintenance order has been release

Hi all,
please tell me how to configure for running mrp for production order/maintenance order has been release. as you know, i want production order has not release will not appear in MD04. I think that is the way for running mrp will not take care about this production order has not release
Thanks all

Hi Hoai,
It is impossible to exclude production order from net requirement calculation in MRP run. You may take a look at the online documentation under the PP-MRP area.
Material Requirements Planning (PP-MRP)
   Planning Process
     Net Requirements Calculation
       Net Requirements Calculation for MRP
But there is a way to temporarily exclude production order from MRP. That is you can set the 'delivery completed' indicator in 'Goods receipt' Tab in in production order. Please note that this order will not appear in MD04. Actually to some degree, this order could be considered as completed because ticking the indicator could set status 'DLV' for the order. But you still can execute confirmation, goods issue and goods receipt activities. This way is just a workaround. You may
consider it.
Or maybe you can consider the useage of BADI: MD_CHANGE_MRP_DATA to change the MRP run data to see if this could fulfill your requirement.
Regards,
Rachel

Problems downloading and installing OS X Yosemite An error occurred while running scripts from the package

Hi! I have problems downloading and installing OS X Yosemite.
While downloading this message pops up:
An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.
and in /var/log/install.log i can see:
MacBook-Pro installd[1086]: PackageKit: Install Failed: PKG: pre-install scripts for "com.apple.pkg.InstallMacOSX"\nError Domain=PKInstallErrorDomain Code=112 UserInfo=0x100193c00 "An error occurred while running scripts from the package “wct8079783343594854923.pkg”." {\n NSFilePath = preinstall;\n NSLocalizedDescription = "An error occurred while running scripts from the package \U201cwct8079783343594854923.pkg\U201d.";\n NSURL = "#InstallMacOSX.pkg -- file://localhost/Users/username/Library/Application%20Support/AppStore/91504108 2/wct8079783343594854923.pkg#Distribution";\n PKInstallPackageIdentifier = "com.apple.pkg.InstallMacOSX";\n}
does anyone have an idea about this?
thank you very much

Mucked up installation. If the installer app is still in /Applications, delete it and start over.
27" i7 iMac (Mid 2011) refurb, OS X Yo (10.10.2), Mavs, ML & SL, G4 450 MP w/10.5 & 9.2.2

Cannot prevent ExtendScript debugging while running scripts from After Effects

Hi,
I am facing this issue while running scripts from within After Effects. Whenever I am trying to run a script in After Effects, the script opens up in ESTK in the debug mode. The execution waits at the starting point of the script as if there is breakpoint even though there is none. I am not sure whether what I am missing, whether some debug flag needs to be reset etc. I am using After Effects CC on Windows 7 OS. Any help would be highly appreciated.
Thanks.

I tried running the script after removing all $.writeln() statements, but unfortunately that does not resolve the problem. For testing the issue, I am trying with the simple script given below :
var window = new Window ("palette", "My Window", undefined);
var panel = window.add("panel", undefined, "Panel");
var text = panel.add("statictext", undefined, "Testing AE");
window.show();
But executing even this one from AE opens up ESTK. I am absolutely stuck with this odd behaviour .

An error occurred while running scripts from the package "ztb343812063996219254.pkg

i tried to upgrade my os lion 10.7.5 to os x yosemite on my macbook pro and in the middele of downloading I'm getting this notice: an error occurred while running scripts from the package "ztb343812063996219254.pkg
help me please…..
i think i have problem with the app store cause sometimes I'm getting more errors like error no 13 or 100
what should i do?

Super BOM doesn't generate while run MRP from Sales Order

Similar Messages

Maybe you are looking for