Super Drive louder on new iMac?

We just got the new iMac home and am transfering our backups from cd/dvds and the super drive is considerable louder then the iMac G5 we took back. Is this normal for the drive in this iMac, or is this a problem whith my machine?

Hallo,
I have the same or at least very similar question.
Just ordered the 21.5" imac with 1TB fusion drive. I need to transfer 450GB of photos from my old windows PC to the new imac set-up. This set-up will include some drive(s) for back-up, but not sure yet which drives.
Just moving the 450GB of photos to imac HD seems a bit much: with photos, applications and some other stuff 60-70 % of the imac HD would allready be consumed up right from the start.
I am using Lightroom for organizing, editing, etc.  of my pictures. So this should run as smooth as possible.
Any advice on a good configuration on how to work with iMac, Lightroom, 500 GB of pictures, external HD, back-up is welcome.
thanks,
Maarten

Similar Messages

  • I connected my external hard drive to my new imac to put all of the information from my macbook onto it. i have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done?

    I connected my external hard drive to my new imac to put all of the information from my macbook onto it. I have been working on the macbook now and want to reconnect the external hard drive so my imac is updated with the work. How is that done? or is it possible?

    As I said, I don't use Time Machine, so it'd be best to wait for an "expert" answer, but, with my very limited knowledge, I'd say: probably not - so, for now, I'd suggest you read up on Time Machine:
    http://web.me.com/pondini/Time_Machine/Home.html
    http://support.apple.com/kb/index?page=search&src=support_site.home.search&local e=en_US&q=time%20machine
    And, you might be attracting more knowledgeable answers if you were to post this question in the Time Machine Forum (part of the Snow Leopard forums).

  • How do I restore from old hard drive to a new iMac ?

    The logic board in my mid 2008 iMac 24" has failed just 3 months out of AppleCare. To replace this will cost me HK$ 6500. I was going to buy a new mac anyway, just waiting for the next refresh model to come out.  So a new 27" i7 with highest spec and SSD and 2TB hard drive with AppleCare will cost me HK$ 24k. No brainer to just buy a new iMac rather than spend 25% of the cost to repair a 3+ year old iMac.
    The hard drive is working ok so the repair centre said they will remove the hard drive for me and suggested I buy an enclosure for it , put the old drive in the enclosure and then transfer the program's, settings and files to the new IMac.
    What is the best way to do this ?  I obviously cannot boot up the old drive. Can I connect this drive  to the new iMac and then use setup assistant to move settings and program's to the SSD on the new iMac , then use migration assistant to move the remainder of the files ( documents folder, iPhoto etc) to the hard drive on the new iMac ?
    If not then any suggestions ?

    Do as the repair center suggests and place the old drive in an enclosure then connect it to the new Mac.
    When you first start new Mac run Setup Assistant and tell it to restore from the external drive.
    It worked for me and should work for you.
    Allan

  • I recently purchased a new iMac with an external drive.  I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac.  Comments?  Help?

    I recently purchased a new iMac with an 1 Terrabyte external drive.  I want to transfer my files from my old iMac to the external drive, but I'm afraid that doing that will compromise the use of the external drive on my new iMac.  I have not downloaded the external drive's software onto my old Mac because of this concern.  May I simply "drag and drop" the contents I want transferred to the external drive, then set up my new Mac with the drive and download there? or is there a better procedure?  Comments?  Help?

    If your intention is to copy a just documents and data (word processing files and music for example) then yes, you can use drag and drop. If you want to transfer data and applications and permissions, it would actually be easiest to connect the drive to your old computer and turn on TimeMachine. Once TM is finished, connect the drive to your new computer and restart it holding the option key to get into Recovery mode. Then you can use the restore from TM option to transfer your data and programs to the new computer.

  • How do I transfer data from a hard drive to my new Imac

    Hello,
    First off, I don't know much about computers, so please forgive me if I sound stupid... Anyways, I had a PowerMac G5 that took a dump. The hard drive is still good and so is the info on it. I want to transfer the pictures, itunes library, and word docs to my new Imac. I thought I had this info backed up to EXTERNAL HD, but I think I did it wrong and the info is not there. Is there a way to transfer the info from my old G5 HD to my new Imac. Genius Bar guy already removed my HD from my G5. My G5 will not start up past the grey apple screen. Thanks for any help you can provide.
    Darren

    What Larry means is buy something similar to OWC Neptune 3.5" Oxford 934 FireWire 400 (1394A) Enclosure Kit for SATA Hard Drives up to 1TB. All Cables Included http://eshop.macsales.com/item/Other%20World%20Computing/NP35SFW/ and then connect your old hard drive to your new iMac with FireWire 400. Mount the disk and transfer the data.
    A good solution for only $48 USD.

  • I recently upgraded my old powerbook to an iMac.  I've dumped the files of my backup drive into the new iMac. Is there a way to have access to all the files (new and old computers) when logged on as the same user vs. logging in and out to access each?

    I am new to posting to this support community but have often referred to it for answers.  So thank you all who've contributed; you've been a great help!
    I recently upgraded my old powerbook to an iMac.  I've dumped the files of my backup drive into the new iMac. Is there a way to have access to/merge all the files (new and old computers) together so when I'm logged in can access all the files.
    Thanks!
    M

    Sure-glad to help you. You will not lose any data by changing synching to MacBook Pro from imac. You have set up Time Machine, right? that's how you'd do your backup, so I was told, and how I do my backup on my mac.  You should be able to set a password for it. Save it.  Your stuff should be saved there. So if you want to make your MacBook Pro your primary computer,  I suppose,  back up your stuff with Time machine, turn off Time machine on the iMac, turn it on on the new MacBook Pro, select the hard drive in your Time Capsule, enter your password, and do a backup from there. It might work, and it might take a while, but it should go. As for clogging the hard drive, I can't say. Depends how much stuff you have, and the hard drive's capacity.  As for moving syncing from your iMac to your macbook pro, should be the same. Your phone uses iTunes to sync and so that data should be in the cloud. You can move your iTunes Library to your new Macbook pro
    you should be able to sync your phone on your new MacBook Pro. Don't know if you can move the older backups yet-maybe try someone else, anyways,
    This handy article from Apple explains how
    How to move your iTunes library to a new computer - Apple Support''
    don't forget to de-authorize your iMac if you don't want to play purchased stuff there
    and re-authorize your new macBook Pro
    time machine is an application, and should be found in the Applications folder. it is built in to OS X, so there is nothing else to buy. double click on it, get it going, choose the Hard drive in your Time capsule/Airport as your backup Time Machine  and go for it.  You should see a circle with an arrow on the top right hand of your screen (the Desktop), next to the bluetooth icon, and just after the wifi and eject key (looks sorta like a clock face). This will do automatic backups  of your stuff.

  • How do I share a hard drive with the new iMac to load a disk from macbook pro

    How do I share a hard drive with the new iMac to load a disk from macbook pro. I want to install office for Mac from a disk but dont know how to share har drive from macpro
    thanks

    The new iMac's don' t have DVD drives however almost all have a disk drive. The easiest method of installing MS Office for Mac on your new iMac is to download it from Microsoft and then input the code you received when you purchased your original license. Otherwise you can use the DVD drive on your MBP to install on your iMac, that feature is called Remote Disc. Instructions for Remote Disc can be found at:http://support.apple.com/kb/ht5287

  • I have just purchased an iMac which has no CD Drive, when I downloaded my Elements 8 from my external drive onto my new iMac I just get Error Code 150.30 does this mean that I have no way of retreiving my existing software?

    I have just purchased an iMac which has no CD Drive, when I downloaded my Elements 8 from my external drive onto my new iMac I just get Error Code 150.30 does this mean that I have no way of retrieving my existing software?

    According to Adobe instructions installation files are not available for Elements 8?
    Languages
    Mac OS X
    Windows
    English—International
    English—Universal
    German
    Japanese
    French
    French—Canada
    Chinese—China
    Dutch
    Italian
    Portuguese—Brazil
    Spanish
    Spanish—Latin America
    Spanish—North America
    Swedish
    Not available
    File 1 of 2 (1.2 MB)
    File 2 of 2 (1.1 GB)

  • USB external Super Drive not recognized by iMac

    Bought a new USB external Super Drive a few days ago (from Apple shop).
    Plugged into my iMac 21.5", late 2013, and the iMac does not seem to want to recognise it.
    Checked Finder and necessary boxes ticked up to show on Desktop, also does not show through remote devices.
    Any help would be appreciated. Not a techie and 90 miles from my Apple shop.Not even sure I have filled the dam request in correctly (sorry).
    Oddjob70
    <Subject Edited by Host>

    Oddjob, the optical drive itself never shows up on the desktop,. What happens when you insert a disc? If a disc doesn't show up first check your connection. Try resetting the SMC Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support and PRAM How to Reset NVRAM on your Mac - Apple Support
    There's also the possibility that the drive is bad.

  • Super Drive in my Intel iMac making noise

    My 21" Intel iMac (v.10.8.3) super drive just started making this chattering sound when I inserted a disc.
    I had copied 4 CD's to iTunes, then the fifth started to make that loud chattering noise.
    I ejected the disc and cleaned it up but that didn't help.

    One more long shot...
    PRAM reset, CMD+Option+p+r...
    http://support.apple.com/kb/HT1379
    In fact, do 3 in a row, takes a bit of time.

  • How can i view and upload photos from an older version of iPhoto which are on an external hard drive to my new iMac?  i currently have copied the application version 9.4.2. on my lacie backup and want to view and upload this to my new iPhoto version 9.5.1

    our old iMac died suddenly, but i had backed up the iPhoto application to a lacie external hard drive.   however, when i try to open it in my new iMac which is installed with version 9.5.1 and is upgraded to maverick, it comes up with “cannot be opened, to open you must upgrade to latest version” and then makes you press the quit button.
    the iPhoto version on the external hard drive is iPhoto 9.4.2 which i upgraded on 29/11/12 onto our old iMac (early 2007 version)
    my new iMac is running on version OSX 10.9.1
    i have looked at buying  iphoto library manager and have emailed them about whether this would work, but any advice would be gratefully received as i cannot be the only person that has had this problem but i cannot find any answers that work.
    thanks
    Julie

    YOu can rebuild with Library Manager and this does not require a purchase:
    Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.

  • How do I transfer my apps from an external drive to my new iMac?

    I just purchased a new iMac and am currently in the process of getting everything set up. My previous Mac was a powerbook, so there are many changes that I will be getting used to in the near future.
    My primary concern at the moment is getting my apps into my new iMac iTunes library. I have all my music, apps, podcasts, etc. saved on an external drive which I plugged into my new iMac. To import the music into iTunes. I selected File > Add to Library > then selected the external drive with my iTunes folder & imported the enitre folder (which was 163.57 GB). Everything, including my music, movies, podcasts, books, & TV shows transfered over just fine with the exception of my apps. After researching the issue, I discovered the iTunes was saving all the apps on my powerbook instead of the external drive in a folder titled Mobile Applications. I then transfered the folder from my powerbook to the external drive and followed the steps above to try and import my apps into my new iMac library. But have had no luck. Each app comes up with the following message when I try to add it to the iMac library:
    The app "[adult swim]" could not be added to your library because an error occured. An unknown error occurred (-50).
    This is as far as I have been able to get. I am ensured that my new iMac Itunes account is authorized for that computer & have synced my iPhone once, which updated iCal, but no apps.
    Any guidance you can provide would be greatly appreciated. I tried to use the Mac Migrate program but did not seem to have any luck. It took almost 12 hours to run over wifi and hung up at the very end. Also, I do not see any evidance of any files being added.
    Thanks.
    Jeff / Texas

    Migration didn't work for me on the music side of things either. What did work however was transferring the entire iTunes folder over to my new computer. Everything switched then, and it was just like iTunes on my old mac. Maybe if you can find the library files in there or something and transfer them over.

  • Can I use my old macbook as a disk drive for my new iMac?

    My husband just bought me a new new iMac (yey!) but had assumed it would have a dvd drive (as you do).  It doesn't.  So can I use my old Macbook to upload cds and dvds and somehow import to my itunes on my new computer?

    As long as your Macbook is up-to-date.  Go to system preferences>Internet and Wireless>Sharing>check mark CD/DVD sharing.

  • Need help & advice RE transferring from a hard drive to a new imac.

    Hello, firstly I apologize if I am setting up this question in the incorrect location, I am technology illiterate even as far as forums. Recently my 2007 Imac stopped working, repair people removed the hard drive (I believe) from it for me as it was too expensive to fix the machine. My big worry now is hopefully files from my old computer can be transferred to a new Imac? Also if so, is it something I can be walked through, as there aren't really a lot of reliable tech repair businesses in my local area? Is there also anything I should be mindful of when purchasing a new computer? My old system was 20"Mac, 2.0GHz, 1GB, 250GB capacity, I am assuming as long as my new system has better specs a transfer would work, but I really have no clue? Is there any special equipment I would have to buy, should I be aiming to get a new computer with certain specs? (get a system with 320 GB capacity, as opposed to 250GB for example) Sorry for all the questions, more so if they should be obvious, any help much appreciated!

    Hello and thank you kindly for taking the time to offer assistence. I believe its intel based, it is this model as linked to here.
    http://everymac.com/systems/apple/imac/specs/imac-core-2-duo-2.0-20-inch-aluminu m-specs.html
    Please bare with me so I can see if I have this right. Migration Assistent is an application or feature on the Imac I will be getting (will be a newer model than the one I posted above) - my newer computer would be considered the host and my older computer the target? Here is a bit I get a bit unsure. When the last repairmen gave me back my computer, they gave it back with the hard drive seperated - is that a factor or something worth mentioning? I am assuming that I need a wire of some sort or can a transfer be done wirelessly? I have tried figuring all this out and seen firewire cables mentioned a bit, but err I can't even find any sockets on the hard drive given to me by the repairmen whick makes me wonder if I am even looking for the right kind of info. Oh and I ~ to be continued ~

  • I want to transfer my Windows files from my Clickfree external drive to my new iMac. iMac recognizes the drive but won't read the files. What should I do? My PC hard drive is dead so I can't hook up my iMac to that.

        I'm switching from Windows to iOS. But my new iMac won't allow me to transfer my Windows files on my Clickfree HD425 over to the iMac. It initialy didn't even recognize my hard drive during set up, so I manually went through Finder where it recognized the Clickfree drive. But my files wouldn't appear. I can't go back to my original Windows computer because the hard drive crashed, and that's why I bought this new iMac in the first place. What should I do? As a Mac newbie who was reluctant to exit the Windows world, I don't want my original babystep into the iOS world soured by my first experience.

    Hi Rick, & a warm welcome!
    In Disk Utility on the Mac, what Format does it say the drive is?

Maybe you are looking for

  • My IMovie keeps freezing everytime i open it?

    Everytime I click to open my iMovie, the application opens, and then after a couple second it freezes, and it says 'application not responding' when I right click on the icon to force quit it.... What is wrong? how can i fix this? Thank-you in advanc

  • How do I know if I have a Solid State Drive?

    Where do I look to figure out if I have an SSD or a HDD?

  • VO extensions error

    Hi oaf experts, Iam having one Standard page,in that iam adding two custom fields,for this i have find out that standard vo and extended that.i have added two fields,custom table name,join conditions in the extendedvo. i have done all things like sub

  • Order Address per Line Item in OLA

    Hi, hoping someone can help with an OA/OLA query. One of our Buyers would like to use a different ordering address for one of the line items in an OLA.  Is there any way to set up an Ordering Address per line item in the OLA?  Or does she need to cre

  • Page overflow in check printing

    To suit the requirement I am calling PERFORM scheckinfo_speichern USING 2 (page overflow), the SAP is not updating the void reason. Please give any suggestions to correct thus