Super drive won't recognize audio CDs but will burn

Anything I can do about this?
When Audio CDs are inserted I will hear the drive attempting to load through several cycles then spit it out. Tried multiple CDs and CDs do work in CD player. ALL are original audio CDs not copies, cloned or burned. ALL are clean.
BLANK CDs will seat and allow me to burn through iTunes.
ALL DVDs load and play fine.
I feel like this suddenly happened but can't remember the last time I inserted an audio CD. I completely reformated (clean install) my HD last Thanksgiving, updated all drivers and programs I could find. (not sure about firmware for super drive but I think I found it was the lastest) I swear the CD ROM worked.
Got a new iPod at Christmas and it works fine. Itunes works fine!
Original Mac Mini and updated SuperDrive..... Info here:
I replaced original CD ROM drive with Super Drive about 4 years ago. There has never been a hardware issue. Clean install fixed random CD burn problem.
Super Drive:
PIONEER DVD-RW DVR-K06:
Model: PIONEER DVD-RW DVR-K06
Revision: 1.01
Detachable Drive: No
Protocol: ATAPI
Unit Number: 1
Socket Type: Internal
Machine Name: Mac mini
Machine Model: PowerMac10,1
CPU Type: PowerPC G4 (1.2)
Number Of CPUs: 1
CPU Speed: 1.42 GHz
L2 Cache (per CPU): 512 KB
Memory: 1 GB
Bus Speed: 167 MHz

Ditto for like 2 years.
I have the exact! same problem. A lot of people confuse similar drive problems with ours when diagnosing.
Here's what I have found out, although after 2 years, I haven't been able to completely fix it.
Something related to my login is corrupt or missing. If I log in under my wife's login, and insert the audio cd, everything is perfect. Then if I switch back to my login, everything is perfect for again. However every cd must still be inserted under her login.
I really with this additional post will help somebody who has had this actually answer. It isn't a drive problem, or itunes problem.... and clearly a complete re install of osx isn't necessary.
Dan

Similar Messages

  • DVD drive will play audio CDs but will not read from a DVD with photos saved on it -

    DVD drive will not read DVD with photos saved on it. Also will not run system discs. Gives mesage "please insert a disc into Drive D. It plays CDs fine so appears to be working.
    Please advise - thank you.
    Gerry

    I too have this same problem.  Posted about it in another thread then saw this.  I hope there is a fix.

  • I just updated iTunes to 10.5.0.142 on Windows 7. Now it doesn't recognize audio CDs

    After updating iTunes to 10.5.0.142 this morning, iTunes doesn't recognize audio CDs. I ran the diagnostics for my DVD drive, and it said everything was OK, but the CD name doesn't show in the navigation bar, nor does the list of songs appear. I tried with several different pre-recorded commercial CDs.
    Ctrl E DOES eject the CD.
    Also Help-->iTunes Help ends up with an eror "Not Found--The requested URL /itunes/win/10.5/ was not found on this server."

    I find a way to add music.
    Make sure iTunes is closed.
    Go to the song file on your computer. If the file has the little black musical iTunes symbol as its icon, just double click the file. It should open up in iTunes and stay in you library.
    If the little black musical iTunes symbol isn't next to the file, right click the file and go to "Open With" and then click on "iTunes". It should open up in iTunes and stay in your library.
    Yeaaa its the long way but that's the only way for now, unfortunately.

  • My CD/DVD-rom drive won't read audio cd's

    Since installing itunes on my laptop, the CD/DVD rom drive won't read audio cd's any more! However, it will read data CD's and dvds.
    It didn't stop all at once...it started failing to read the odd random audio cd. Over time, gradually more and more CD's not recognised until no audio cd's readable at all!
    When I say 'not recognised' I mean that if you look in the cd-rom file with a music disc inserted it thinks the drive is empty. The drive spins the disc a few times and then gives up. As only music cd's affected I suspect this is something to do with the itunes software. I've tried the various troubleshooting tips on itunes help but no joy....has anyone else had this problem / anyone know of a possible solution?
    Thanks
    Tiny

    I had the same problem and I contacted a support team. They suggested that I upgrade my computer's power supply and I did. I had a 250W drive and now I have a 350W drive and it reads the CDs perfectly; except for one certain CD.

  • New hard drive won't recognize my iPhone

    My hard drive crashed and my replacement hard drive won't recognize my iPhone. I can see all my content, but can't move or replace it. I was able to access content on my iTouch just fine and luckily synched my contacts back into my laptop, but no dice on the phone. Any ideas? BTW, my phone is a jailbroken original iPhone and I am not particularly proficient with this kind of stuff.

    Does it boot into Open Firmware with CMDOption+of ?
    http://docs.info.apple.com/article.html?artnum=42642
    reset-nvram (press Enter)
    set-defaults (press Enter)
    reset-all (press Enter)
    Have you done a PRAM reset...
    http://docs.info.apple.com/article.html?artnum=2238

  • G4 DVD drive won't recognize OS 10.4 upgrade disc

    I have a a PowerMac G4 (AGP graphics) with a CPU type PowerPC G4 (2.9). I have a upgrade disc for OS 10.4. When I load it into my Quantam Fireballlp LM27.3 DVD drive, the drive won't recognize the disc. It attempts to read it and then ejects it. I have an external USB 2.0 DVD RW burner plugged into a USB 1.0 port, and it recognizes the disc, but I can't select it as the startup disc.
    How do I get my system to read the upgrade disc so I can upgrade to OS 10.4? I've run a lens cleaner several times with no change.
    Thanks!

    Hi-
    Well, if you know someone who has a Mac, or, if you have another machine, try the disc in another machine. There is a possibility that the disc itself is bad. I would consider this a strong possibility, since the drive recognizes other DVD's, and the Panther install disc.
    If the disc tests good in another machine, then you will need to consider replacing the drive for a newer model. A new combo drive is only about $30-$40. The Pioneer DVR-112 would be a good consideration.
    http://eshop.macsales.com/item/Pioneer/DVR112DBK/
    As for the "helpful" not working, there seems to be a problem within the system (known by the hosts, yet allowed to continue....). For now, I will gladly accept your thanks! (and, you're welcome!)

  • My 24" iMac won't read audio cds--ejects them after about 15 seconds

    My 24" intel iMac won't read audio cds. It ejects them after about 15 seconds. I have virtually never played cds on this machine in five years. It plays dads with no problem. Anybody have any feedback. I also saw a fix by deleting some presence files.

    I saw this on a forum from about four years ago:
    Trash the following folders:
    com.apple.kernelcaches (from System/Library/Caches
    extensions.kextcache (from System/Library
    CDInfo.cidb (from Home/Library/Preferences
    Restart
    Could this be a fix.
    Unfortunately, I can't reset PRAM. I've done it a thousand times over twenty years,but my machine simply boots up without the extra chimes.

  • I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will  not play, any suggestions?

    I'm running Mavericks 10.9.3, updated iTunes earlier today, but although I can play audio CDs, DVDs will  not play, any suggestions?

    Hello there, tomazdes.
    The following Knowledge Base article written for the USB SuperDrive, offers some practical steps to try when issues present themselves with particular content playback (feel free to skip Step 3 when working with an iMac or MacBook with built-in drives):
    Apple Computers: Troubleshooting the slot-loading SuperDrive
    http://support.apple.com/kb/HT2801
    Particularly:
    Accepts discs but they don't mount or are automatically ejected
    Make sure the drive is not placed upside down. The aluminum enclosure should be facing up as shown in section 1.
    Check the disc's surface for scratches and dirt, since these things can prevent the disc from appearing on the desktop.
    Connect the MacBook Air SuperDrive directly to the computer's USB port instead a USB hub.
    Reset the System Management Controller (SMC).
    Ensure your drive can read the specific type of disc being used. The System Profiler or System Information may provide additional information regarding what media your computer supports.
    OS X Snow Leopard v10.6 or earlier: Open Apple System Profiler by choosing "About this Mac" from the Apple () menu. Then, click More Info.
    OS X Lion v10.7 and later: Click the Apple () menu and then hold down the Option key. Choose System Information from the menu.
    If the disc continues to not be recognized, contact Apple or an Apple Authorized Service Provider, or make an appointment with an Apple Retail Store.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • Imac 10.6.8 won't recognize usb printer but laptop same OS does. Perhaps because i removed lion??

    imac 10.6.8 won't recognize usb printer but laptop same OS does. Perhaps because i removed lion?? all latest drivers installed tried two different usb cords system profiler doesn't see printer under usb. Can you help?

    Repair permissions and restart your computer.  Also, check System Preferences/Printe & Fax.  Make sure your printer is listed. 

  • I have an external seagate 2tb drive with 3 partitions each with encrypted passwords. What must I do if one of the drives won't recognize it's password?

    I have an external seagate 2tb drive with 3 partitions each with encrypted passwords. What must I do if one of the drives won't recognize it's password?

    I would have to say the LCD display or possibly the inverter as the graphics adapter can properly output to an external monitor. This would be repaired under warranty.
    \\ I do not respond to PM regarding individual tech support. Keep discussions in the forum for the benefit of others //

  • My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

    My iMessage won't activate my email but will with phone number. I type my password and it says it's wrong I change it and it still says its wrong. I even made a new account and it still says the password is wrong.

    Hi hectorness12!
    Thanks for using the Apple Support Communities! I have found an article that can help you with troubleshooting your iMessage issue. The article can be found here:
    iOS: Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/ts4268
    Thanks,
    Braden

  • Emails won't open on Mac but will on laptop and iPhone. On Mac can see the subject heading but the rest is blank in both preview pane and if I try to open the emai. Can anyone help me?

    emails won't open on Mac but will on laptop and iPhone. On Mac can see the subject heading but the rest is blank in both preview pane and if I try to open the emai. Can anyone help me?

    Back up all data. Rebuild the mailbox.

  • HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

    HPLJ3055 won't print through HPxb3000, but will print if directly connected to dv9000.

    Hey there @pepsitruck
    I understand you cannot print from your desktop however, you can print from your laptop.
    Could you please run the Print and Scan Doctor again and let me know the results or post a screen image of the results?
    This diagnostic tool will check for any conflicts that could be causing the issue. The tool will show you a report at the end. If there was a problem that the tool could not fix, you will notice it in the results.
    You can also try manually stopping and restarting the print spooler and try printing from Notepad afterwards.
    1. Click Start
    2. Type "Services" in the search field.
    3. Open SERVICES
    4. At the bottom, click "Extended View"
    5. Search for Print Spooler
    6. Right-click it and choose Properties
    7. Select as Automatic in the drop down box, close the Window
    8. Right click on Print Spooler and choose "Stop", wait until it stops and then right click again and "Start".
    9. Close out of Services and try your print again.
    When you get to your response, please include which version of Windows you're running please.
    Which Windows Operating System am I running?
    Thank you,
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • I have a new iPod Classic 160Gb.  i have an iTunes Account, it recognizes my device but will not sync my library of music to my new iPod.  What do I need to do?

    I have a new ipod Classic 160GB.  I already have an Itunes account.  The Itunes account recognizes my device but will not sync my library to this new device.
    What do I need to do?

    Hi Amy2250,
    Have you tried to sync music to the iPod via the iPod subdirectory of iTunes? To do this, plug your iPod into your computer, go into iTunes, click on the iPod tab, click on 'Music' in the iPod subdirectory and select whether you want to sync your whole iTunes library or just selected songs and press sync.
    Alternatively, have you tried manually transferring music onto the iPod using the 'drag and drop' method? To do that, go into iTunes with your iPod connected, click on the iPod tab, in the iTunes iPod Classic subdirectory click on the 'Summary' tab, then tick the box saying 'Manually manage music' and click save. Then, in the same subdirectory click on the 'On this iPod' tab and click on Music. Then, select the songs you want to transfer either in Finder or Windows Explorer, select the songs you want to copy to the iPod and drag them to the blank list in the 'On this iPod' area of iTunes you just opened.
    Good luck,
    stefanrandomly

  • Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it.   Please could someone help me?

    Hello.. I try to make copy an audio track(AIFF-C audio) on another dvd but I can't. I was try to made an ''burn folder'' with the audio track but did burn it.   Please could someone help me?

    You appear to be having a hardware problem. Make an appointment at the Genius Bar of your nearest Apple Store to get a diagnosis.

Maybe you are looking for

  • Limited Number of fire wire ports

    I am editing with Final Cut Express using my laptop (MacBook). There is only one fire wire port. So in order for me to capture the video footage I have to capture from the camera to the computer's hard drive and then transfer to my external drive. It

  • HT1657 how can I cancel a download?

    How can I cancel a downloaded movie while its trying to download?

  • Oracle Customer Hub - where do I find the product to download?

    I know this sounds dumb.... but I've searched the OTN Downloads, and Edelivery but where can I go to download a trial version of Oracle Customer Hub (OCH) and Oracle Product Hub (OPH)?

  • Is anyone developing for Android Tablet?  (w/different resolution?)

    The default Android smartphone resolution is 480x800.  But the biggest screensize so far for an Android Tablet is the Samsung Galaxy tab at 800x1280. Was wondering if anyone is developing a flash app at the 800x1280 resolution?  or is this not an opt

  • It goes on to a kernel panic screen

    i rang apple helpline and they wud charge 35 quid for help. i really cant afford that so am looking for help. i wanted to restore my mac to factory settings but put my flat mates i mac osx disk in instead, tried to carry on then held my restart butto