Super slow speed, and for once its not my ISP's fault.....

Hello friends,
I have the WRTG v6 router and have had no problems with it until the last few days.  Suddenly my connection has become very slow and I am no longer able to play my xbox online without going straight through the modem.  I thought that it may be my ISP, but when I hook up directly to the modem and do a speed test everything is perfect.  I also thought that maybe the computers had some spyware that was slowing things down, but even with both computers powered down the online gaming was still lagging.  So what gives?  Is there a setting somewhere in the router that is slowing things down?   Any info at all is greatly appreciated.

same thing to me, so slow... i regret why i bought  this router. i got no help what so ever

Similar Messages

  • Super Slow speeds and extremely high latency

    This is my last attempt with Verizon high speed DSL (the only service they offer here). I have been dealing with them for months about my slow connection speeds and high latency. Finally, after a new modem, supposed line monitoring and a two tech visits the last tech found noise in the line and fixed some of my issue. Now my speed and pings are good EXCEPT during peak hours (M-F 12 pm -1 pm, 3 pm - 7 pm and Friday and Saturday 7-11 pm). During these times m Internet becomes completely unusable with download speeds of 0.25 MBps and pings over 400 ms and today I had a pint of 1713 ms!!! Clearly there is an issue here.

    Hi schichler,
    Your issue has been escalated to a Verizon agent. Before the agent can begin assisting you, they will need to collect further information from you. Please go to your profile page for the forum and look at the top of the middle column where you will find an area titled "My Support Cases". You can reach your profile page by clicking on your name beside your post, or at the top left of this page underneath the title of the board.
    Under "My Support Cases" you will find a link to the private board where you and the agent may exchange information. The title of your post is the link. This should be checked on a frequent basis, as the agent may be waiting for information from you before they can proceed with any actions. To ensure you know when they have responded to you, at the top of your support case there is a drop down menu for support case options. Open that and choose "subscribe". Please keep all correspondence regarding your issue in the private support portal.

  • As Soon As Any Effect Is Applied On The Video Or Sequence The Video Playing Speed Gets Faster Than Normal And Red Screen Also Starts Appearing In Between The Video. Tried Changing The Speed And Duration But Its Not Working.Help Required ASAP.

    The Issue Is Majorly Caused When Any Effect Is Applied On The Video And Rendered The Issue Occurs. And By Closing The Application And Restarting The Application Its Works Fine Again But As Soon As The Effects Are Applied Same Problem Occurs Recursively.

    What is the format of the material you are editing, is it variable frame rate?

  • Hi ihave iphone 4 and imake downloding for sotwera 5 avery think ok but the icon for camer its not showing in lock scaren?

    hi
    frist thnx for supprting i have one proplam with software5 my phone 4 i make upagrd to5 avery think ok  but the icon for camer its not showing with lock scaren how ican make

    Press the home button twice like you do for the multitasking bar and it should show on the right.

  • HT201401 my earphones are not working on my iphone4 to play, stop or forward to other tracks or answering a call and i know its not the earphones as ive just paid out for a new pair at £27.99 and still wont work anybody got any advice as fed up honestly

    anyone can you help my earphones are not working on my iphone4 and i know its not the earphones has just bought new pair and no joy  I can not play, stop, forward to different tracks or anything cant answer call nothing end of ideas can anyone help pretty please

    Yes there genuine apple earphones I have now blown down jack slot and silly enough I turned my phone off and now it's back on earphones working properly now feeling a wee but silly as such a simple thing got them working.
    Thank you guys and I know where to come again if I need any further assistance.
    Again thank you everyone  

  • When im on my apple tv my mac will either start playing music or the volume will go up and down.  Its not on airplay or anything.  Everything work except for this.  thank you please answer ASAP. thanks

    When im on my apple tv my computer will either start playing music, or the voume will go up and down.  Its not on airplay, so i dont know whats wrong... please answer ASAP. Thank you so much!

    The computer is picking up the signal from the remote. Go into system preferences - security - general. Click the padlock and go into advanced. Check disable remote control infrared receiver.

  • Bt infinity 2 slow speeds and disconnection

    hi all hi all after having spent over two hours on the phone with BT being passed from post to post from billing to technical support back to billing people slamming phones down on me and no  help what so ever today 22/05/2014 have been with bt over 5 years phone  line the broadband and all services 
    it a joke now 
    2012 I have had fibre optic broadband service with BT and all was ok till November 2013 when start have slow speeds and in January year 2014 started having disconnections reconnection connections form 5 mins to to 60mnis or sum times 2mins  of the broadbands and the connections sometimes 3 to 4  times a day disconnections and so on .... when was supposed to be fixed the upload speed was very slow and the download speed was okay when I first started with BT with the fibre-optic broadband two years ago nearly I was averaging about 42 meg per day and average speed of upload was 6.5 Mag
    but now 32.meg dowm /up is 3.5 Rwent off in February he did a shift in lift because the broadband was 42 meg download bought lacked upload speed of less than half meg for the day of the lift it ran at 52 meg  with an average upload speed of about seven meg from around February till the end of February then stat act erratically reboot the bt hub 4 rebooting all time DSL light off on the main openreach modem in one day was off and on 36 times 
    had  engineers visit last week 14th of May to test line all was ok with line but i had now found out that bt they'll are now only selling me option one broadband fibre-optic even though I am paying for option two they now states that the speed on my line will never go above 36 meg so why am I paying for option 2 fibre-optici be through to the billing department today said yes you are an option 2 but  the technical department to say my line will only support 36 meg and I did find out from the engineer that I am on option one and only for the supply of the broadband line but have been pay for BT infinity option2
    I think this is just an easy way for BT to get out of fixing the mind correctly by downgrading the line but wanting the customer to carry on paying for option to have tried with billing to sort this problem out today they just said you need to speak to technical support technical support what support manages to say you need to speak to billing one of them even slammed the phone on me 
    No customer support spent over two hours on the phone today and got nowhere and one department saying we can downgrade you to option one broadband but it will cost you £30 to do so 
    who i speak to if billing are no help at all ??????

    BT BROADBAND AVAILABILITY CHECKER
    Telephone Number 01704 on Exchange CHURCHTOWN is served by Cabinet 6 
    Featured ProductsDownstream Line Rate(Mbps)Upstream Line Rate(Mbps)Downstream Range(Mbps)Availability Date  High Low High Low    
    FTTC Range A (Clean)
    41
    32.3
    8.3
    6.3
    Available
    FTTC Range B (Impacted)
    35.2
    19.3
    8.3
    5
    Available
    WBC ADSL 2+
    Up to 15
    8.5 to 19
    Available
    WBC ADSL 2+ Annex M
    Up to 15
    Up to 1.5
    8.5 to 19
    Available
    ADSL Max
    Up to 7
    6 to 8
    Available
    WBC Fixed Rate
    2
    Available
    Fixed Rate
    2
    Available
    Other Offerings
    Fibre Multicast
    Available
    Copper Multicast
    Available
    For all ADSL and WBC Fibre to the Cabinet (FTTC) services, the stable line rate will be determined during the first 10 days of service usage.
    For FTTC Ranges A and B, the term "Clean" relates to a line which is free from any wiring issues (e.g. Bridge Taps) and/or Copper line conditions, and the term "Impacted" relates to a line which may have wiring issues (e.g. Bridge Taps) and/or Copper line conditions.
    Throughput/download speeds will be less than line rates and can be affected by a number of factors within and external to BT's network, Communication Providers' networks and within customer premises.
    The Stop Sale date for Datastream is from 30-Jun-2012; the Formal Retirement date for Datastream is from 30-Jun-2014. The Stop Sale date for IPstream is from 31-Dec-2012; the Formal Retirement date for IPstream is from 30-Jun-2014.
    If the End User wishes to migrate from their current Broad

  • Iam not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

    am not able to activate my iphone it was working fine i restored it . i have entered the correct apple id and pass still its not able to activate

    i am the original owner of the iphone 5s i been using for a month the and the apple id and pass is the correct one
    i just restored it and i am entering the same apple id and pass still its giving the error msg . but with the same id and pass iam able to log in to itunes ,icloud

  • I downloaded fire fox and installed but its not opening after installation

    I downloaded fire fox and installed but its not opening after installation. So what should i do?

    Hi, tiger's iphone.  
    Thank you for visiting Apple Support Communities.
    Here are the best troubleshooting resources to go through when experiencing issues updating your iOS device over-the-air.
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    Resolve issues with an over-the-air iOS update
    http://support.apple.com/kb/TS4431
    You can also update this iPad via iTunes on a computer as an alternative.
    Update your device using iTunes
    If you can’t update wirelessly, or if you want to update with iTunes, follow these steps:
    If you use your device's Personal Hotspot for your computer's Internet connection, update your device wirelessly or connect your computer to another network.
    Install the latest version of iTunes on your computer.
    Plug in your device to your computer.
    In iTunes, select your device.
    In the Summary pane, click Check for Update.
    Click Download and Update.
    If you see an error message while updating your device, you can learn how to resolve iOS update errors in iTunes.
    Update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    Cheers,
    Jason H.

  • Why passwd for CHAP must be the same while for PAP its not mandatory ?

    Hi,
    want to ask a question in WAN about PAP/CHAP.
    why passwd for CHAP must be the same between routers  while for PAP its not mandatory ?
    regards

    By default, much of this type of checking is performed for you. Read the available checks in {font:Courier}/usr/share/doc/pam-0.99.6.2/txts/README.pam_cracklib{font} and then decide if these are sufficient.
    Note that some checks are not enabled by default, You can tune them by editing the {font:Courier}/etc/pam.d/system-auth{font} file:
    # /bin/fgrep /etc/pam.d/system-auth
    password    requisite     pam_cracklib.so try_first_pass retry=3and tinkering with the command line arguments there.

  • HT201317 my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel (version2 ) for activation. its not being activated. i tried many times but failed. i have activated photo stream on my iphone. please guide me

    my computer (window 7) give me message "photo stream is not enabled. when i go to icloud control panel on computer (icloud version2 ) for activation. its not being activated. i tried many times but failed. when i check the photo stream option and apply its shows that its ok. and after closing when i again open icloud panel the photo stream option remains unchecked that means its not activated. please guide me.

    Had the same problem. I uninstalled icloud, restarted my pc and reinstalled icloud and it's working fine. Hope this helps.

  • TS4036 Why after buying more storage icloud backup in my iphone still fails and tells me its not enough storage?

    Why after buying more storage for icloud backup in my iphone it still fails to back up and tells me its not enough storage?

    Welcome to the Apple Community.
    You may find parts of my tip about iCloud Storage & Backup (sizes) useful.

  • I have a new laptop and it says its not authorized to load my....

    I have a new laptop and it says its not authorized to load my library of  music I have ALREADY bought and downloaded on my old laptop..HELP?

    There's a couple of ways to get through to the authorisation controls in the 11.0.x versions.
    The control is still in the Store menu, but first (if you're using iTunes versions 11.0.x) you might need to bring up the menu bar to see the Store menu.
    If you're using 11.0.x, click on the wee boxy icon up in the top-left corner of your iTunes to see the "Show Menu Bar" control, as per the following screenshot:
    Then you'll find the control in the Store menu:
    Alternatively, if you don't want to bring up the menu bar, it's still possible to get into the authorise controls via nested menus accessible from the wee boxy icon. Here's a screenshot of where to find them:

  • On my iphone 4 i tried to enter my $25 itunes card and it says its not valid when i bought it yesterday... whats the problem?

    On my iphone 4 i tried to enter my $25 itunes card and it says its not valid when i bought it yesterday... whats the problem?

    http://support.apple.com/kb/ts1292Try this link...
    Message was edited by: all the answers

  • Super Slow Internet paying for 75/35 and its slower than dial up

    I switched from optimum to Fios to get the faster internet. It worked for a few days and then its almost impossible to even send and email.
    I have switched out the router, had a tech come out and replace the ONT. the techs dont know whats wrong, i asked for credit since I'm not getting what Im paying for. When I told them this, they said they dont have a problem on their side so no credit. I really dont care about the credit I JUST WANT WHAT I'M PAYING FOR.
    After 7 PM at night it's even slower. It crawls so slow, the service just stops and i get disconnected. Tech support never heard of this happening, but now another service tech is coming out.
    I see alot of other posts on the web with customers having the same problem, so Verizon must know there is a problem,but doesnt have a fix.  Am I wasting my time trying to get the faster speed???
    Has anyone gone through this and had it resolved????  I sometimes have to go my local starbucks and send emails and work.
    Is this rediculous.....Well if they cannot fix it, bye bye Fios.

    Hubrisnxs wrote:
    Most people that use FiOS Internet get what they pay for and more.  
    Are you wireless and getting these slow speeds or Hardwired and getting these slow speeds.
    Try running the Network Diagnostic Tool (NDT) while hardwired and then make sure to click the details and post them here.  
    Tried the NDT  link to get familiar with the tool in case I ever need it.  Got the following message.
    An Unexpected Error has occurred.
    Sorry, your request failed. A notification has been sent to the development team for investigation.
    Exception ID: 302AF902

Maybe you are looking for

  • [Data Services]Calling stored procedure from scripts in parrallel workflows

    Hello. I am using Data Services XI .3.2 with Oracle Database 11g Situation is like this: I have a workflow that has a script that using function sql() performs a simple select.  Example: sql('DW_CTL','select 1 from dual'); If I call this workflow 4 t

  • How can I create a textbox-like field?

    I am writing a After Effect Plug-in. I want to create a textbox-like for user, when click om plugin in after effect cs4 popup textbox So, if there is any example to create that UI for me? Thanks a lot.

  • 1440x900 Display

    Has anyone ever been able to get a resolution of 1440x900 working on a mac? I have a G5 and (2) Samsung monitors that really want to see a resolution 1440x900, and the video card says it will support it (NVidia FX6), but it is not listed in the avail

  • Crystal Report on BW BEx Query via MDX in SAP Portal

    Hi! We need to display a CR in the Portal. The CR is based on a MDx BW Query. To create and display the report is no problem. Even saving back to BW is working fine. But how do we get this CR displayed in the EP? Thanks in advance Jörn

  • 1099 Forms output not created

    Hello I have downloaded the seeded 1099 template provided. Modified the necessary changes, saved it as Adobe Version5.0 or later and created a new template in the Apps. When I run the conc program the output file is not getting created. Any input or