Super-slow sync on brand new 80GB classic, randomly disconnects

Got a new 80GB classic today and it is REALLY slow at syncing, granted I have over 3000 songs to sync but my old 20GB U2 iPod did not take over 8 hours to upload all these songs and this new classic has already given the message 'Ok to disconnect' twice, as if the sync is complete, which is isnt. It doesnt get anywhere near halfway the 3000 tunes. I am not using a 2.0 USB but this was never an issue with my much older iPod. I cant even leave the comp on all night to take care of the sync because I know i will wake up to an 'ok to disconnect' message with about half the songs on the Pod. I think the iPod itself is slow, as the clock on it doesnt match my desktop while I watch it sync, its only just caught up the what the time was 5 minutes ago, and before this it was over half an hour behind. The yellow sync logo moves really slow, should it? maybe my comp is just too old to handle so many songs and such a new iPod, haha.
Message was edited by: MattJolley

we purchased a new 160GB Classic 3 weeks ago and it was working fine up until this weekend. Now we're encountering the following problems:
- iTunes can't remember the library location and keeps changing to the default location
- iTunes and Windows don't recognize that iPod is connected
- iPod won't synch
- there are corrupted paths in the library file (weird characters at random places in path)
I've installed the latest Windows updates, uninstalled and reinstalled iTunes, run regclean.exe, and fixed the library file paths.
Still, when we attached the iPod, we have problems. When I look at the Task Manager, the services.exe keeps running.
Any help? my husband is ready to throw the iPod out the window.
amberink

Similar Messages

  • ITunes 10.6.1 (7) freezes when syncing brand new iPod Classic

    In my attempts to sync a brand new iPod Classic (160 GB) with iTunes I only get a freeze up of iTunes, where only a force quit helps to terminate the hang. I have of course done all the usual, i.e. restored the entire iPod Classic, restarted my Mac, made sure all software is the latest software. All to no avail.

    Syncing a 160GB iPod Classic, may take a long time, so better to stop all other process or apps, when you do it.
    Especially, disconnect all other USB devices and connect the iPod directly to the body of the Mac and not to the Keyboard USB port or any USB hub.
    I think you have done all other suggestions, that I can think of.
    Except doing a Disk Diagnostic on this new iPod, and send it back to Apple if the DD report is bad, refer to this earlier post by tt2
    https://discussions.apple.com/message/17776595#17776595
    Have a nice day!

  • Itunes won't sync to my brand new ipod classic.  It says "The Ipod cannot be synced because it cannot be found.

    I have been onto Apple by phone, and into the Apple store where both of them recomended that it gets replaced.  I did, got a brand new ipod classic, and i still have the same problem.
    I have attempted to restore, but it won't let me for the same reason.
    On a couple of occations it starts to sync!!  however it goes through practicly the whole syncing process (12,000 songs, heaps of videos) and then just freezes up! The little rainbow orb spins forever until i have to force quit.
    I have had my old ipod and my partners ipod regestered and used on the one itunes with no complications whatsoever, our old ipods sync perfectly with no problems at all.
    very frustrated.
    Is it my Ipod Box?
    Or is it Itunes?
    or does it not like me having more than two ipods registered?
    with the last new ipod which was replaced and the current new ipod that's a total of 4 ipods regestered on the one itunes
    My partner has a Dell Laptop with Microsoft.  I downloaded Itunes on there, ripped one cd, formatted the current new ipod, and it synced the one cd i ripped with no trouble at all.
    Has anyone else had the same problem with their Ipod Classic?
    Mick

    Is iTunes up to date (10.7)?  Have you tried plugging the iPod into a different USB or using a different USB cable?
    I would recommend doing a disk diagnostic on the iPod's HD using the instructions given by turingtest2 in this older thread to check your Hard Drive's health.  He always covers what the resulting numbers indicate.
    https://discussions.apple.com/thread/3784647?start=0&tstart=0
    B-rock

  • Cant sync iTunes Videos to my NEW 80gb Classic!

    Just hooked up my new 80gb classic to iTunes for the first time and all my music loads just fine. However, I bought a handful of music vids and a couple episodes of Entourage from iTunes and they refuse to sync. Itunes gives me the "not the correct format" error. Did I just throw away $20? What can I do to resolve this?

    I'm sorry, the error is actually something to the effect of "your iPod does not play videos"

  • Anyone else's Brand New 80g Classic have a dicky wheel?

    I got a brand new 80g classic 2 weeks ago, and the wheel is just so unresponsive. sometimes its ok, but most times I really have to press hard to try and get my volume adjusted (and of course if you press to hard it becomes a button and skips to the next track)
    This is the kind of thing I would expect to happen after a good few months perhaps, and even then only occasionally, but straight out of the box I find this pretty annoying.
    So - as this happened to you, or have I just got a dud?!
    Thanks
    Hugh

    Hughey,
    I have the same issue with my 80gb Classic. I have a cover I use for the gym and the clear rubber/plastic covering of the wheel is JUST thick enough to stop me from useing it. I have to take the Ipod OUT of the cover just to adjust volume and change albums.
    Aside from that, I do get a little lag on the Ipod. Like you select a song and then you have to click the wheel a few times before you can adjust the volume, or you turn it on and it takes about 15 sections to scroll anywhere.
    Like the last poster suggested, make sure your firmware is up to date.. I think it should be 1.1.1 by now, something like that. It helped a LITTLE but the main issue with the Classics is all of the features Apple jammed into them. Although it's COOl to have Coverflow it's not usefull and things like that feature slow down the Ipod dramatically sometimes (click wheel!).
    You didn't get a dud, besides the fact that my click wheel can be frustrating at times the Ipod works GREAT, music, movies, everything is just fine. It's just something we have to deal with. I do sometimes miss my 30gb video, but I washed it on accident with my clothes so it died tragically .
    But like I said before, just keep waiting for new firmware updates and hopefully Apple will fix that issue to the best of their abilities as soon as possible.
    Hope this helped,
    Dom.

  • HT1386 I have a brand new Ipod classic (Christmas 2012-13), a newish laptop (2012) and have downloaded the latest version of iTunes.  However, despite the ipod being recognised by the laptop/iTines, telling me it is synchronising, it actually won't synch.

    I have a brand new Ipod classic (Christmas 2012-13), a newish laptop (2012) and have just downloaded the latest version of iTunes.  However, despite iTunes working fine on the laptop, the ipod being recognised by the laptop/iTunes, telling me it is synchronising, it actually won't synch.  I have reset the ipod, tried different USB ports, restarted the laptop, and uninstalled / reinstalled iTunes, but still not working.  Can anybody help ?

    Well, I don't know if that's a software or hardware problem.  You should take it to Apple Genius Bar or send it to service center.  And one more thing, Its not synch......  Its Sync...  Just saying...  It would help if you send pictures of the problem.  Such as the screen of iTunes saying it's syncing.  It will help everyone and me...

  • Brand new iPod classic 160 gb won't show up in iTunes devices

    Brand new iPod classic 160 gb won't show up in iTunes devices. The iPod is fully charged, iTunes reckonises my iPod touch, iPad, iPhone 3G and iPhone 4, but not the iPod classic, although it says the iPod is connected it doesn't register in iTunes.

    I purchased a new iPod Classic 160 GB in August 2013 and it (the iPod Classic device) would not show in iTunes though it did show in the Apple Finder. I tried EVERYTHING numerous times including resetting the iPod, updating iTunes and trying everything in the book and in on-line tips. Nothing worked and I was about to give up when I tried using the Apple iPod Classic cable that actually came in the iPod Classic box. It worked!!! Conclusion? Dont just use any old Apple cable eg. from a iPhone or whatever; TRY the USB cable that came with your iPod Classic!!! I have 2009 iMac with the latest Mac OS BTW.

  • Brand new 80gb! very frustrated?!?!

    i have a brand new ipod classic 80 gb. i had a 30 video and absolutely loved it, but it was stolen in a vehicle robbery and this is my replacement. when i hook it up, i am given a message that the ipod "ipod" requires itunes 7.4 or later and to download the newest version and try again or something like that. i have installed 7.5 numerous times and still get this same message every time!it will not do anything. any ideas????? please help, any advice is much appreciated!
    Message was edited by: RNTBuck

    i've got a laptop. don't have a mouse. i tried to format -> restore device deafults (brand new ipod, guess it was on default..) it took about an hour to do half so i cancelled it. switched the itunes back, it works, but doesn't show the still connected ipod.
    my old ipod is a two years old ipod mini. i lost it's usb about a month ago and didn't bother buying one cos i knew i'll buy a new ipod soon.
    so i use the same usb cable. and obviously not at the same time.
    sorry for my tone, but it's late and i'm frustrated.

  • Just to clarify, I am running Mac osx 10.4 and I am trying to sync a brand new I pad 2 I did NOT buy from apple.  Do I need to downloand Mac Osx 10.5 or higher to activate this Ipad 2?

    Just to calrify, I am running Mac OSX 10.4 and I am trying to sync and brand new Ipad 2 which I did NOT buy from Apple and my I tunes does not recognize the device when I plug in the USB cable.  Is this because I need ot downloand OSX 10.5 or higher?  Thank you

    I believe that we were involved in this discussion yesterday.
    http://www.apple.com/ipad/specs/
    Yes you mst be running 10.5.8 or higher. From the Apple iPad technical specs.
    Apple ID (required for some features)
    Internet access5
    Syncing with iTunes on a Mac or PC requires:
    Mac: OS X v10.5.8 or later
    PC: Windows 7; Windows Vista; or Windows XP Home or Professional with Service Pack 3 or later
    iTunes 10.5 or later (free download from www.itunes.com/download)

  • I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    I connected my brand new iPod Classic 160 GB to my brand new Sony home entertainment system through the headphone jack (to the audio line in). The volume is ridiculously low. Can somebody help me out here?

    Make sure the volume on the iPod is turned up fully, since this will affect what you hear through the stereo.
    Make sure Volume Limit is set to full. (From Main Menu, Settings/Volume Limit)
    If you purchased your iPod inside the EU (European Union), then the maximum volume from the headphone jack is lower than elsewhere in the world. If this is the case, buy yourself a 30-pin Dock Connector to 3.5mm jack lead, such as the one linked here...
    http://www.amazon.co.uk/Decrescent-Connector-Stereo-Auxiliary-iPhone/dp/B007NIE5 EE/ref=sr_1_1?ie=UTF8&qid=1386012456&sr=8-1&keywords=30+pin+to+3.5mm
    That connector will take a higher volume out (than the European Union's output) and that will be louder (and hopefully loud enough) through your stereo.

  • 80GB Classic Randomly Restarting & Then Freezing

    I've only had my new 80GB Classic for a day and already things have gone wrong. I got all my content on there, no problems but now when I use my iPod it plays music and works fine but it randomly "dies" and goes to the apple screen then after a minute or so it goes to the menu but it freezes on the menu. I then have to restart it toggeling the hold button and holding the menu & middle buttons.
    I haven't noticed a pattern or anything that makes this happen, it's happened whilst playing music, playing games even just changing the settings.
    Anybody else having this problem, or can offer some advice. Thanks.

    Yep, that's happening with my 160 Gb Classic, too. Sometimes it doesn't even go to the Apple screen, it just goes totally blank.
    I want my 5G back.

  • Brand new ipod classic won't sync to itunes 11.

    I just got a brand new 160gb ipod classic for Christmas, and when I tried to sync it with itunes it wouldn't work. I ran the diagnostics and it failed the sync tests, and apple's help/troubleshooting page does not give any solutions to this problem. I have the latest version of iTunes and my computer is a Windows XP. What do I have to do so I can sync my ipod?

    I posted as other have that there is something wrong in iTunes going on with the syncing of these classics. First my wifes stopped being recognized in the diagnostics. It says there is no phone, ipod or ipad attached, but iTunes shows its attached. then I called my daught up and had her check her iTunes version and she is also at the latest version online. I asked her how long has it been since she knows she has synced her music...she said a week or so.
    I asked her to download any podcast or free music and try to sync. Her Classic 160 did the exact same thing 200 miles apart. Both iPods previously worked with no problems for years. Now neither is detecable in the iTunes diagnostocs. I unloaded and reinstalled a clean iTunes on my wifes win 7 x64 laptop that she has used since the ipod was new (years). No good.
    I know Apple is going to find a problem either with the mobile service or something else that is going to be the cause of this syncing or not syncing issue.

  • Brand new iPod Classic will not sync with iTunes.  All my older devices are fine, but as soon as this is connected, iTunes stops responding when it says it's "determining tracks to sync."

    Also, the iMac I'm connecting it to is brand new as well - replacing a slightly older one.  My complete library got imported during setup and, like I mentioned, my older iPod classic synced fine, as did our iPhones.  Thoughts??

    Is the Convert higher bit rate songs to 128 kbps AAC option ticked from under the iPod's Summary tab in iTunes?  If so disable this feature and then try resyncing the device.
    B-rock

  • Machine restarting when i trya dn sync with new 80GB Classic

    I've recently purchased a new 80GB ipod classic. When i tried to sync it for the first couple of times it got to about 3,500 songs and then restarted the machine. This happened twice, and even though it said it got about halfway through my library there was nothing on the ipod.
    Now it'll sync for about 5 minutes and copy stuff onto the device, but it will then restart the machine. I've ran checks on all hardware and can't find a problem. I've also update itunes to the latest version, and checked for any software updates for the device itself but can't see anything
    Does anyone have any idea's. I had absolutely no problems with my 5th gen ipod, and that seems to work fine.

    So I made an appointment at my local Apple store and was basically told, sorry, we don't know how to help you. He retored my iPod--since that was the only solution he could come up with. Yes, it erases everthing, but there didn't seem to be any other solution. He said there have been a lot of problems with the new iTunes, but this was the first time he had heard of this particular problem. Interestingly, the Apple store has not upgraded to the new iTunes, they are still operating on the older one.
    So my iPod (and iTunes) worked well for a few days after I retored, but now iTunes is once again freezing. I don't think I'm going to connect it again until they sort this out. It took forever to reload everything back on my iPod after the retore!

  • Brand new Ipod Classic 80Gb - Synching Problems - Ipod ejecting itself

    Bought a new 80Gb Ipod last week after my old one crapped out. Computer also crapped out so had to load all my CD's to another laptop on newly downloaded Itunes 7.5. Hooked the new ipod up to the laptop and immediately had problems with the Ipod 'ejecting' itself before any songs were loaded. Furthest I managed to get was name the darn thing before it ejected. So, tried the 5R's with no success - still kept on 'ejecting' - sometimes straight away, sometimes part of the way through synching the library always with the end result of no songs on the ipod. Tried updating windows, updating Itunes, restarting computer, using different cables, different USB ports (all 2.0) with no success. Took the Ipod to the Apple Genius Bar where they restored it and managed to successfully synch a few tracks. Thinking the problem was solved - took it home and it is doing exactly the same thing again. AAAARRRRGGGHHH. Trawled the forum boards all day yesterday found a few suggestions I hadn't tried - setting it to enable disk use etc etc. When I hooked the ipod up last night it was ejecting immediately after connecting so not even giving me a chance to try the new fixes. Plugged it in this morning for a last ditch attempt and it connected long enough for me to switch on the manual synching and I successfully loaded 32 songs out of 4000 (yippee!!) before it started the same carry on again - disconnecting itself..
    This is so frustrating - what has happened to the ipod??? I had no trouble at all with my old one. A new piece of kit such as this should not be so time consuming and stressful. After this experience there is no way I will buy another ipod.
    Has anyone got any suggestions?

    I had over two weeks of frustration getting the right collection of fixes installed (iTunes 7.5 and 1.0.2 on the iPod; 1.0.3 should be OK). My symptom was that iTunes starts to go spacey on me when I plug the iPod classic into the USb port. There are long delays that I can't find a good cause for.
    Start up iTunes on your PC.
    Before you connect the iPod to your PC, try putting the iPod into Disk Mode (don't know the article info but there is one on this site; just search for "Disk Mode". There will be a check mark on the iPod screen when you have successfully arrived there.) Then plug it into the USB port on your PC.
    It may take several seconds/minutes for the iPod to be recognized in iTunes (I get some help with this by clicking on the Windows Start button, which overlays part of the iTunes screen, and waiting for iTunes to refresh its screen.)
    Before you click the Sync button, be sure you have chosen all the tabs you want to sync; since my music library is over 40GB, I choose this one first and let iTunes copy over my whole music library. I also check the Enable Disk Use box on the Summary screen. I then go out for coffee or to the bathroom (it takes a while).
    Once everything is copied over, be sure to press the Eject button in iTunes to be sure it is releasing the iPod.(Try my Windows Start button trick above to get positive feedback when it is safe to disconnect.) When it disappears from the list on the left-hand side and the screen is refreshed, it is safe to disconnect the iPod. (I'm not sure this is absolutely necessary, but it works for me.)
    It can be a little dicey to get the iPod out of Disk Mode or even to just turn off the iPod, but keep trying and you should be able to get it back into normal mode with all your music, video, podcasts and photos (haven't tried Contacts or Games) playable.
    Getting
    When all the information has been copied over,

Maybe you are looking for

  • How to Open & Close the periods in Asset Accounting for Depreciation.

    Dear All, How to to How to Open & Close the periods in Asset Accounting for Depreciation ? Please let me know If there is any T.Code or procedure for it. Your help is highly appreciated. Thanks & Regards, Pankaj.

  • Error: "This license has already been fulfilled....."

    This past week I updated my iPad to the new IOS7 software. Immediately after doing so, I tried to download a book through Overdrive...software used by most libraries.  Unfortunately, two problems occurred.  The Overdrive sofware was not compatible wi

  • Biased Hall effect sensor and NI 9201 module. How can I calculate the velocity of an object?

    For my final year project at university I have designed and built a drop tower for testing the energy dissipation performance of test pieces. In the system I specified having a biased Hall effect sensor (gear tooth sensor) to calculate the speed of t

  • Sapscripts doubts

    Below are my few queries. 1.How to display the symbol in bold ,<B>&ITABLE-NAME&</> is not working,can we display it in bold? 2.How to get employee position?I tried mapping with otype of pa0001 to otype of t528t tables but it retrieves many records.Wh

  • Where is the query window in SSMSE 2008 Express?

    I have been trying to find the query window in SQL Server 2008 Express.  I've been using SSMSE 2005 Express from a Start Menu button called "SQL Server Management Studio Express."  So far I have installed Microsoft SQL Server 2008 R2 RTM - Express wi