Superdrive cannot read any disks

I don't know when it happened, but lately, my Superdrive won't read any disks. Music CDs, software, video DVDs, nothing works. I can't even use a blank CD. A few seconds after inserting a disk it is ejected, with no other notice from the system.
This is a 14" iBook G4, about 18 months old.
Has anyone experienced this, and is there a solution short of bucking up at an Apple service centre? I'll bet this is going to sting a little.

Can anyone tell me if this will work in an iBook?
http://www.pioneerelectronics.com/pna/product/detail/0,,207617573091302357597,00.html
Pioneer DVR-K06
The DVR-K06 slim-line internal DVD burner introduced by Pioneer offers many industry-leading technologies including:
• 8x Writing Speed on DVD-R, DVD+R, DVD+RW, 6x on DVD-RW, and 24x on CD-R/RW
• DVD-RAM reading and 5x Writing Speed
• Low Power Consumption
• 4X DVD Dual/Double Layer Writing
• Multi Effect Liquid Crystal Compensator
• Slim Design
iBook G4   Mac OS X (10.4.6)   1.5 GB

Similar Messages

  • HP BD ROM Cannot read any disk

    Hi,
    HP BD ROM BC 5541H cannot read any  disk cd / dvd.I tried these troubleshooting steps, but I still can't solve the problem. What should I do next? 1-Microsoft Fix it. 2- sfc /scannow, Scan result ( windows resource protection did not find any integrity violations. )  3- Uninstall device from device manager and install again, device manager status  ("This device is working properly").but rom have same behaviour , no any change.
    Please help me.... how to diagnose/solve problem ?
    Regards,
    Minhas

    You might check to see if you have the most current BIOS installed.
    You  might also try removing it from device manager.
    Install the Intel Chipset Driver
    Then reboot and let it reinstall it self.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
    **Click the KUDOS star on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cannot eject any disk or disk image

    I cannot eject any disk or disk image except with disk utility. Dragging to trash, sidebar or toolbar buttons, even the keyboard button will not work. Restarting holding mouse button and disk utility eject button do work. Any suggestions?

    Try doing this:
    Boot from your Tiger DVD. After the installer loads select Disk Utility from the Utilities menu. After DU loads select your OS X volume from the list on the left, click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
    If DU reports errors it cannot fix, then you will need Disk Warrior (3.0.3 for Tiger) and/or TechTool Pro (4.1.1 for Tiger) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    See if this restores your eject functions.

  • I was using my flashdrive, then ejected. 5 min later I reinserted to be told "this machine cannot read the disk" Why would that be ?

    I was using my flashdrive, then ejected. 5 min later I reinserted to be told "this machine cannot read the disk" Why would that be ?

    Unfortunately I tried that and it didn't work. Thanks for the help though. I tried to uninstall and it said I couldn't because the file is corrupt or something, but I think I finally got it uninstalled and/or deleted or whatever, but now I try to reinstall/download it again from the beginning and I can't. No matter what I do I can not get Firefox working again. No matter how many times I try to redownload it. Any other suggestions?

  • The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    The "Roman" font is not being recognized in Firefox 4.0. As such, I cannot read any previously posted topics or post any new topics on websites using this font.

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Cannot read any form posted data

    I create a web server :
    import java.io.BufferedReader;
    import java.io.InputStream;
    import java.io.InputStreamReader;
    import java.net.ServerSocket;
    import java.net.Socket;
    public class TestWeb extends Thread {
        Socket soc;
        ServerSocket server;
        InputStream is;
        BufferedReader br;
        public void run() {
            try {
                while (true) {
                    soc = server.accept();
                    if (soc!=null)
                    is = soc.getInputStream();
                    br = new BufferedReader(new InputStreamReader(is));
                    String line = "";
                    while (line!=null) {
                        line = br.readLine();
                        if (line==null) continue;
                        System.out.println(line);
            } catch (Exception ex) {
                System.out.println(ex.toString());
        public TestWeb() {
            try {
                server = new ServerSocket(80);
            } catch (Exception ex) {
                System.out.println(ex.toString());
        public static void main(String[] arg) {
            try {
                new TestWeb().start();
                System.in.read();
            } catch (Exception ex) {
                System.out.println(ex.toString());
    }It can read the header when someone connect to this server
    However, it cannot read any form posted data.
    Does anybody have any idea?
    The following is the html source that i use in a browser to connect to the test server
    <HTML><BODY>
      <CENTER><H1><FONT COLOR=BLUE><B>Test</B></FONT></H1></CENTER>
      <HR>
      <FORM METHOD="POST" ACTION="http://127.0.0.1">
        <INPUT TYPE=TEXT VALUE="abcde">
        <SELECT>
          <OPTION VALUE="1">1</OPTION>
          <OPTION VALUE="2">2</OPTION>
        </SELECT>
        <INPUT TYPE=SUBMIT>
      </FORM>
    </BODY></HTML>

    I would expect the form data posted to be received. For example, the user chooses the option value and the text input value.
    This test is hang just after receiving the header information and no parameters collected.

  • Still no fix for superdrive not reading any disc at all?

    I've searched through the forum and it seems like there's still no solution for the superdrive not reading any sort disc at all. I have had this imac for almost a month. I rarely have used the superdrive but was trying to play a normal audio cd tonight and upon further investigation found that the drive is not reading any type of disc.
    If a disc is loaded, the drive whirs/beeps 4-5 times while trying to read the disc and then ejects it. this happens for dvd movies, audio cds, osx install disc, etc.
    I did successfully play and rip some cds a few weeks ago when the imac was first purchased. I have not inserted discs often enough in the past to substantiate that upgrading to 10.4.5 or 10.4.6 affected the drive's performance.
    Think I need a new drive or could this be software related?
    imac intel core duo 17"   Mac OS X (10.4.6)  

    I want "solved"
    You can add me to the list too - I check this page frequently for a reply from an apple representative - to no avail.
    My computer is less than 2 years old, purchased brand spankin' new, w/o the warrantee - but hey when you pay that much for your 'puter it should not break down at ANY time during (at least) the first 5 years, unless gross negligence and disregard is involved (which is is not).
    I would not categorize myself as being in the 'high usage' category for burning either dvd's or cd's, but here I am less than 2 yrs after purchase w/ a superdrive that can't even read a store-bought cd, and oddly enough the problems I am having DO seem to coincide w/ download of a 'security update.'
    Hmmmm......
    I would like, at the very least, a helpful suggestion from someone working for Apple - if not an acknowledgement of an actual issue with a faulty (expensive) product.
    A guarantee of satisfaction with a purchase should not be wrapped up in purchase of a service plan - good customer service is good policy, and should be provided as a means of standing behind the quality of a product you both sell, and believe in.
    There is no good reason why my computer should be broken, and there is no good reason why it shouldn't be fixed - and I see a lot of you have even more reason for complaint than I do. It is irksome in the extreme that this issue seems not to warrant the attention from anyone who can make a difference to our plight.
    One would think that a drop-down menu on an official web-site would have a better response rate from affiliated 'professionals' - but we all know the old adage about assuming...
    Hey - maybe customer service really is dead - and I might believe that if it weren't for the fact that I respond, personally, to customer e-mails on a daily basis...
    Where is our response?
    I apologize for the lengthy "blog" - but short and sweet hasn't done the trick..maybe this will?? We can only hope...

  • Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

    Dear all, I am using Safari Version 5.0.6 (5533.22.3) but I cannot read any Nepali or hindi text. It shows sort of box sign "द". Please guide me to fix it, I will really appreciate your help.

    gyanu1812 wrote:
    This is the snapshot of an email that if you have sent it to me.
    No, that is the snapshot of my posting in this forum.   Here is a picture of my sent message.  Are you not getting my emails sent directly to you?

  • Thunderbird encrypted the mail inbox and I cannot read any email

    When I open the inbox, all emails are encrypted (with symbols and numbers) and I cannot read any email. How I can recover all the emails or solve the problem?

    Thunderbird does not encrypt anything. What you are seeing is more than likely file corruption.
    Right click the problem folder and select Properties. Then Repair Folder.
    Be prepared to lose messages if the corruption is too bad.
    Read this article about system maintenance to help prevent this in the future.
    http://kb.mozillazine.org/Keep_it_working_%28Thunderbird%29

  • My disk player isn't reading any disks

    My Pro has stopped reading any disks.

    Have you tried cleaning the lens?  Use a lens cleaning DVD or a fine microfiber cloth (eyeglasses cleaning cloth) wrapped around a business card gently inserted into the slot.
    Ciao.

  • CD-Rom Drivers cannot read data disk burned with PC

    HI, My iMac(Intel) cannot read data disk burned with PC, and the disk is ok for PC. But it can read music CD. Somebody can tell the reason, or modify configurtion?

    You need to be much more specific, remember we aren't there and can't see your screen so we have no idea what file types you have on the CDs, without that information it's impossible to assist you.

  • Can see shared CD drives on MBA, but cannot read any data from disks

    Puzzling one here.
    Have a MBA and am trying to use the shared drives on either a Windows XP computer, or MacBookPro notebook. Both computers are on the same wireless network, and both computers have DVD/CD sharing enabled.
    In the RemoteDisk shortcut on the MBA, I can see both computers and their shared drives, and I can even see the title of the disks that are in the drives, however, I cannot see any of the data on the disks. It tells me 0MB at the bottom of the window.
    The MBA has all updates installed, and I even tried to manually install the RemoteDisk/Sharing update from Apple.
    I found this post, and tried the commands in Terminal, but that did not help: http://jasonevangelho.com/2008/11/02/how-to-really-enable-remote-disc-dvd-drive- sharing-non-air-macbook/
    Any idea's?

    Oh yeah, I forgot to say that the wireless router is a Time Capsule.

  • HT3964 My Mac OX 10.9.2 is unable to read any disk since I updated the new operating system on it a few months ago. How may I resolve this problem?

    My Mac OS X 10.9.2 is unable to read any disc since I updated the operating system to Marverick a few months back. How can i resolve this problem because I need to retrieve very important information on my discs. Help! Thank you... paul

    Paul,
    Your problem has nothign to do with your installation of Mavericks. I assume you are referring to your SuperDrive not being able to read any discs, is that correct? If so then please advise what troubleshooting steps you have taken?

  • Using the Hotmail account thru Windows 7; MSN; Hotmail; we can sign into hotmail and cannot read any of the e-mail files. This is just on this computer. We can read Hotmail on our other computers. How do I fix this?

    We use Firefox and can access any site we'd like until we sign into hotmail.com. We are using windows 7. The Hotmail site brings up the e-mail listings but we cannot open any of them in any of the folders. Do you have a solution? Please do not repond to e-mail as we cannot open those to read the solution.

    You can try to update to the current Firefox 28 release.
    *Help > About Firefox
    You can find the full version of the current Firefox 28.0 release in all languages and for all Operating Systems here:
    *http://www.mozilla.org/en-US/firefox/all.html
    It is possible that the <i>cookies.sqlite</i> file that stores the cookies is corrupted if clearing cookies doesn't work.
    Rename (or delete) <b>cookies.sqlite</b> (cookies.sqlite.old) and delete other present cookies files like <b>cookies.sqlite-journal</b> in the Firefox profile folder in case the file cookies.sqlite got corrupted.
    *http://kb.mozillazine.org/Cookies
    *https://support.mozilla.org/kb/Deleting+cookies
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • CR52-A2 doesn't read any disks.

    The other day i was erasing a disk with Nero when it stopped responding and i had to shut down the computer whilst the drive was still 'writing' (although it had been doing it for the past half an hour, so i doubt it was making much progress.)
    When i restarted and tried to erase the CD again, it just said "Please insert a disk into drive d:", when there was already a disk in it. I've tried it with a load of other disks too and it doesn't recognise any of them. The green LED just stays on and there is a quiet but constant clicking coming from inside the drive (like what it does when you first insert a disk, but constantly). What's happened?!
    ..please
    *edit 1 hour 40 mins later:*
    Any time now would be great thanks....
    'Specially since I won't be here tomorrow, and i need it sorted.

    I had the exact same problem, I was in the middle of writing when it stopped and I had to reset now the drive doesn't read any cds. Does anyone know a solution?

Maybe you are looking for

  • I use my debit card which can't be used on payment in app store

    I use my debit card which can't be used on payment in app store. my card is wellsfargo bank's debit card. when I used it to edit a payment type. The card cant be used. The app store said I need used a u.s credit card

  • SUBSTR function in the where clause

    HI I want to get a number of 15 digits from a column where the user only know the last 10 digits. So that when the user enter a number with 10 digits, only the record of that specific number should be displayed. And then when the user did not enter a

  • Changing Apaches default header.

    Is there a way to change the default Apache header? I do not want my system to return Server: Oracle9iAS/9.0.2 Oracle HTTP Server I would like to make this message disappear or return something else. If you know how to do this please let me know.

  • AIR Application Sandbox Bridge Issue

    I am having an issue accessing the sandbox bridge from my application core page. The only thing I think it might be is I am using ajax for a login procedure so it might bolo it because of that. if anyone has any ideas I could use a fresh pair of eyes

  • Why does my iMessage keep in waiting for activation

    My iphone has been doing this for awhile, in IMessages it keep staying in waiting for activation mode..