Superdrive is VERY loud and won't burn discs

The last few times I tried burning a CD in itunes it has not worked properly. As soon as it began burning the songs, the drive started making a loud humming/vibrating noise. After about a third of the way through burning the song files, the disc was ejected, and an error message popped up in itunes saying that there was an unrecoverable error. Not sure if this is related, but the drive also shoots discs out when I eject them, sometimes the discs fly out and roll to the other side of the room... The discs I've inserted have been free of labels so that's not the cause of the problem. (I've read posts of people having issues with labeled discs catching in the drive).
My computer is 3 1/2 years old, so maybe the drive is just dying. My extended warranty is up, so any thoughts to the cost of repair, or if it is an easy repair to do? Any input would be much appreciated. Thanks!

Vibration can be caused by an eccentric CD, so stick to brands you know work well. I have the toaster CD ROM, too. I'm afraid you'll just have to remember to catch the CDs as they come out!

Similar Messages

  • Superdrive UJ-825 won't load Superdrive Update 2.0 and won't burn 4x

    My subject sums it up. When I load Superdrive Firmware Update 2.0, it says there is no drive that needs updating. Nevertheless, the Apple website says that my firmware should be updated and my Matshita UJ-825 has never burned a disc faster than 2x. Any help?

    After doing a little searching, I found that more than likely your issue is being caused by the media you are using.
    I suggest you have a look at the Media Guide.
    http://www.digitalfaq.com/media/dvdmedia.htm
    I personally prefer Maxell 16X DVD-R Media.
    This Newer Media is very high Quality and it will burn at the highest rate your drive will allow.
    I also suggest you choose media in the individual jewel cases over the cheaper bargin basement multi spools of 30-50-or 100 these have shown to be of lesser quality in the pickyer Mac DVD Burners.
    Don

  • Superdrive is very loud and "clunks"

    Just got a new macbook and when inserting a disk it makes a few "clunking" noises. When the disk gets up to full speed it is pretty loud. Just curious if this is normal.
    MacBook   Mac OS X (10.4.9)   Intel Core 2 Duo 2gig Ram, 80gig HD

    Welcome to the forum.
    Please check ''The drive is noisy, vibrates, or scratches media''.
    http://docs.info.apple.com/article.html?artnum=88275-en

  • Satellite A300D - Fan running very loud and notebook is getting very hot

    I was wondering if anybody could point me in the right direction as what to do with the overheating problem i currently have with my A300D. I have had the laptop for under a year so it is still under warrenty but i am not sure where to go or what to do in order to repair it.
    The problem: Around two months ago I noticed the fan running very loud and also the laptop becoming very hot. Now it runs so hot the laptop switches itself off completly. The heat being fanned out of the laptop is so hot! burns your my infact.
    Has any one any advice they could offer me.
    Thanks
    James

    Hi James
    You wrote that you have the notebook under a year so my questions is did you already clean it?
    The notebook should be cleaned every 3-4 months and I do this every 3 months. Every time I do it Im wondering how much dust comes out and after this procedure the notebook is a lot of cooler.
    Here is an interesting Toshiba article about this:
    http://aps2.toshiba-tro.de/kb0/HTD7A01ZZ000AR01.htm
    Compressed air spray is really useful and you should check it yourself!!! ;)

  • I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected

    I have a 2 year old MacBook Pro and the superdrive has stopped working, it won't take discs in as if there is one already inside but iTunes or the dvd player doesn't recognise that there is a disc inside and if there is it can't be ejected, i have tried shutting down and restartinf while holding down the trackpad, as recommended on some forums but that has done nothing
    It might be a huge coincidence but the drive was working fine before i installed lion?

    Installing Lion would not cause the superdrive to stop working.  Are you unsure as to whether or no a cd/dvd is inside?  Something may be broken inside and you should consider bringing it in for service.

  • Mac book pro is running very slow and won't connect to the Internet

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

    Mac book pro is running very slow and won't connect to the Internet. Please help I'm rubbish with computers!

  • Creative cloud download fails at the very end and won't complete [was: can you PLEASE help me?]

    as the title says when i download creative cloud it fails at the very end and doesnt let me download it? PLEASE HELP!! ill do anything

    The problem is that none of us are in the same room looking at the same computer you are looking at. Also "Please help" is not very descriptive and won't invite help.  "Filename.zip won't download" is better.
    We need to know what your operating system (Windows 7 or Mac 10.8) CPU/ram tells us if you meet system requirements.
    Next detail what you are doing, link us to what web page are you downloading from and what link are you clicking to download the file.
    Sometimes browsers can have pop-up or script blockers. You might try another browser. IE, Safari, or FireFox.
    Once we know exactly what file you want,we can give you an alternate download link.
    Gene

  • Superdrive Very loud and trouble burning

    When I'm burning a DVD in my superdrive over 2.4x it gets very loud (almost like airplane propellers) and eventually the disc pops out and complains it didn't burn. This happens with any optical media burned at over the lowest burn speed. Is this normal? I doubt it is, so should I take her into the genius bar?

    Apple Discussions!
    Another help source (if you haven't already done so).
    Go to your OS Help Menu. In the search field type cd
    Click on all the troubleshooting topics & Support Articles that pertain to your issue.
    You can also do the same in Disk Utility. Open same up.
    At the bottom left of the window, click on the purple button w/the "?" in the middle.
    This will bring up the Help Menu.
    ===============
    Try a different brand. Top forum favorites
    CDs
    FUJI
    TDK
    Verbatim
    DVDs
    Maxell
    Make sure the CDs are not dirty, smudged and/or scratched.
    http://docs.info.apple.com/article.html?artnum=50448 How to Handle and Clean CD and DVD Discs
    Your drive may need cleaning. Cleaning kits can be purchased from any store that sells CD/DVDs.
    It is recommended that you repair permissions & restart your computer after each burning session.
    If none of the above works, then hopefully you have AppleCare. Take your computer in to your local AASP & let AC deal w/it.

  • Retina MacBook Pro fan very loud and usb mouse disconnecting when restarting the computer

    2 days ago, I got a brand new retina MacBook Pro 13 inch with the specs 2.8 GhZ i7, 8 gigs of ram and 512gb ssd. It should definitely be functioning properly since it's a really expensive computer, but I already noticed a few problems that I hope you can  help me with.
    So first of all, when I play World of Warcraft, the fan seems to go up to 6000rpm and is very loud. I checked the activity monitor and it says WoW is using about 60% CPU, so it shouldn't have to be that loud. I also installed smcfancontrol, but it doesn't seem to lower the speed of the fan.
    I ran an apple diagnostics test and it couldn't find any problems, and I also tried resetting my smc, but the fan is still going very loud.
    And the second problem I have is, that when I have my mouse usb connected to my Mac, and I restart it, it can't detect the mouse anymore. So I'd have to pull out the usb plug and put it back in everytime I turn on my computer. isn't it supposed to automatically connect to my mouse when it's already plugged in?

    Matt,
    Try reading this, then go to the section on Resetting the SMC for a Macbook Pro with a battery you should not remove.
    http://support.apple.com/kb/HT3964

  • Mac mini Intel Core Duo fan very loud and runs at high speed all the time.

    I purchased an "Open box" Mac mini Intel Core Duo, 1.66Ghz, 2G ram, 80G HD and SD a few days ago from Fry's.
    It runs beautifully except the fan is very loud compared to any Mac my family has ever had. It is so loud that we were thinking of putting it under the desk.
    The fan runs constantly, and I mean all the time, at a high speed. You can really feel the air coming out the exhaust vents. The case is always cool to the touch as is the exhaust air.
    My aunt bought a similar Mac mini (But only 512Mb ram) the same day. Her's is very quiet. The case feels just slightly warm, not unlike other Mac mini's I've seen.
    Should my Mac mini's fan be running this way?
    Thanks,
    llulua
    BTW: The "open box" was sealed with a Fry's label and it said that this had a new warranty. Yet, checking the serial number, it said that it had about 260 days left. I guess Fry's is backing it?
    Also, someone told me that perhaps the main wire from the fan to the logic board is disconnected.
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  
    eMac 1Ghz, iBook 500 dual usb, Mac mini 1.66Ghz Intel Core Duo 2g ram   Mac OS X (10.4.8)  

    Since you have 2 gigs of memory, my thoughts are that when the party (Fry's or the origianl purchaser) upgraded the memory, they neglected to reattach the wire at the front of the Mini under the IR receptor at the right front corner that regulates the fan speed. This wire must be unattached in order to upgrade the memory, and is probably why the original person brought it back, because of the fan noise resulting from failing to reattach the wire. If that wire is left unattached, the fan runs continually at high speed to protect the CPU and system in general. If you do not want to use a putty knife to open the Mini, take it back to Fry's and ask someone who is Mac savvy to open it and reattach the small plastic receptacle at the end of the wire into its socket at the right front of the machine. When I go to Fry's, I am always concerned because the employees allow people to pry keys off of the Apple notebooks, so don't expect that their employees to know or care about anything Mac.
    Al PB 12" 1.5   Mac OS X (10.4.5)  

  • DVD Burner keeps encoding and won't burn my file.

    Trying to burn a home made video onto a DVD and when I attempt to do it, it won't go any farther than encoding the video.  I have left it on for 2+ hours letting it encode and it won't get any higher than 60%.  I'm using Windows Movie Maker software and Windows DVD burning software.  There is no way it should be taking this long.  I am using a Toshiba Satellite L355-S7902.  Do I just need to change my DVD burning software or what?  Any help on this matter would be greatly appreciated.  

    I don't think so. I bought new disks yesterday to be sure and the result is the same. Also, when in the drives, none of the disks (old or new) make any kind of not-normal noise. Everything seems normal, except neither computer can burn. Weird!

  • Very Loud and Never Stopping Fan

    Hi,
    I purchased my HP laptop in September 2010 and for the past few months the fan runs constantly and is very loud. Even after shutting down my laptop for hours, upon start up the loud fan begins. It has gotten so loud and distracting that it is now hard to focus and use the laptop.
    Any feedback would be appreciated. I remember when buying the laptop something about a year warranty on hardware. Does this exist? This issue needs to be resolved.

    Well, the never stopping fan can be due to a number of factors, most usually:
    1)      You have a dust build-up in your heat sink (which may not be apparent by just looking through the vents). Unfortunately your computer’s cooling system also acts as a vacuum cleaner to all those table tops it has been on. It is a common nuisance after over a full year of work. Cleaning it up may require disassembling the whole computer, since the heat sink is inaccessible on many computers. (Word of caution: if you are thinking of using “Canned Air” to blow the dust out, be very wary that you may destroy your fan bearings if the canned air makes the fan blades rotate too fast!)
    2)      CPU may be under constant load (maybe some new buggy software update was installed?) – Check CPU Load on “Task Manager”.
    3)      The GPU (graphics card) may be running always at full speed, thus increasing the heat inside the unit (change GPU profiles to “Battery Optimized” or such).
    Finally, do use a program such as “CPUID Hardware Monitor” to read out the temperature sensors inside your computer. You can better understand at which temperature the fan kicks in and why the temperature is rising to that target.

  • Z420 on startup fans rev up loudly and won't boot

    I have a new z420...when the power button is pushed the light comes on and nothing happens but the following:  the fans go into turbo mode very loudly....and stay there....no video output, no power to peripheral usb devices....no boot up.  Just loud fans.  No way to shut down during this except to power off holding in button.  Please advise!

    Hi hansonthree!
    Sorry to hear you are having trouble starting your Z420 Workstation.
    I have researched your issue. I have included a link to the Maintenance and Service Guide for your workstation. Your situation is mentioned on page 127 under the “Troubleshooting scenarios and solutions” section. It has a detailed set of steps to take to assist in resolving the issue.
    http://h20566.www2.hp.com/portal/site/hpsc/template.BINARYPORTLET/public/kb/docDisplay/resource.proc...
    Happytohelp01
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Ipod won't play out loud, and won't connect any longer to car adaptor

    I have an ipod adapter for my car stereo, and it has worked well with my ipod touch for the 6 months i've been using it. But about a week ago, i was driving and using the adapter, and suddenly my ipod froze and reset it's self. After that, the adapter wouldn't work. It would play for 30 seconds, then the stereo would say "NO IPOD" and after removing the ipod there would be no volume bar, as if it were still connected. i decided to do a total restore, but the problem persisted. I tested it in another car with a different type of adapter, and it STILL would not play. this is VERY frustrating, and since my warranty expired last month, NO help from apple. ideas?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iPod. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iPod.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack or bad speaker or other hardware problem..
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit

  • HT4528 My Iphone 5 icons went very large and won't let me reduce them to normal.  It won't shut off and I can't use it.

    The icons on my Iphone 5 went very large and I am not able to reduce them to normal so I can use them.
    The phone also will not shut off.

    Hi TofteKnitter,
    Thanks for visiting Apple Support Communities.
    If the icons on your iPhone seem large or magnified, it's possible that the "zoom" feature was enabled. This article explains how to check for and disable the feature:
    iPhone and iPod touch: Home screen icons are magnified or large
    http://support.apple.com/kb/TS3129
    Best,
    Jeremy

Maybe you are looking for

  • Accessing a mysql database in struts

    Hy, people, everyone ok????I have a problem: I am making a web application using apache struts were the action calls a DAO wich already have a connection with the database, by a connection that dont use a datasource(yet), so I need to load a driver f

  • Blue bar on the bottom of every video

    Whenever I play a video (more specifically embedded in IE) the video is displayed squeezed on top of a blue bar of pixelated BLAH. This problem is only on my PC not on my PowerMac

  • IDoc to IDOC , Proxy to Proxy demo scenarios

    Hi! Can some one recommend some practical sdn-blogs/documentation for the demo XI scenarios such as: IDoc_to_IDoc, Proxy_to_Proxy, etc. I have a SAP ECC 6.0 ABAP system (IDES system with two business clients) and SAP PI. Thank you very much! regards

  • Establishing BPM, SOA and Enterprise Architecture and 'Governance'

    Good day all, (Originally posted on LinkedIn Oracle BPM group) (This post can also apply to those implementing SOA and/or Enterprise Architecture) After reviewing Oracle's IT Strategies from Oracle (ITSO) reference library (http://www.oracle.com/tech

  • Can't download music anymore from iTunes

    When I try to download music from the music store I receive the error message "Itunes cannot make a connection to Music Store. An unknown error has happened (-9808)" I use Norton 360 on the computer. Who can help me with this problem? I cannot downlo